From: Andrew Yuan <andrew.yuan@jaguarmicro.com>
Our current handling of the mask/compare logic in the Cadence
GEM ethernet device is wrong:
(1) we load the same byte twice from rx_buf when
creating the compare value
(2) we ignore the DISABLE_MASK flag
The "Cadence IP for Gigabit Ethernet MAC Part Number: IP7014 IP Rev:
R1p12 - Doc Rev: 1.3 User Guide" states that if the DISABLE_MASK bit
in type2_compare_x_word_1 is set, the mask_value field in
type2_compare_x_word_0 is used as an additional 2 byte Compare Value.
Correct these bugs:
* in the !disable_mask codepath, use lduw_le_p() so we
correctly load a 16-bit value for comparison
* in the disable_mask codepath, we load a full 4-byte value
from rx_buf for the comparison, set the compare value to
the whole of the cr0 register (i.e. the concatenation of
the mask and compare fields), and set mask to 0xffffffff
to force a 32-bit comparison
Signed-off-by: Andrew Yuan <andrew.yuan@jaguarmicro.com>
Message-id: 20241219061658.805-1-andrew.yuan@jaguarmicro.com
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: Expand commit message and comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/net/cadence_gem.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index f744054a6d8..80fbbacc1e7 100644
@@ -909,8 +909,8 @@ static int get_queue_from_screen(CadenceGEMState *s, uint8_t *rxbuf_ptr,
/* Compare A, B, C */
for (j = 0; j < 3; j++) {
- uint32_t cr0, cr1, mask, compare;
- uint16_t rx_cmp;
+ uint32_t cr0, cr1, mask, compare, disable_mask;
+ uint32_t rx_cmp;
int offset;
int cr_idx = extract32(reg, R_SCREENING_TYPE2_REG0_COMPARE_A_SHIFT + j * 6,
R_SCREENING_TYPE2_REG0_COMPARE_A_LENGTH);
@@ -946,9 +946,25 @@ static int get_queue_from_screen(CadenceGEMState *s, uint8_t *rxbuf_ptr,
break;
}
- rx_cmp = rxbuf_ptr[offset] << 8 | rxbuf_ptr[offset];
- mask = FIELD_EX32(cr0, TYPE2_COMPARE_0_WORD_0, MASK_VALUE);
- compare = FIELD_EX32(cr0, TYPE2_COMPARE_0_WORD_0, COMPARE_VALUE);
+ disable_mask =
+ FIELD_EX32(cr1, TYPE2_COMPARE_0_WORD_1, DISABLE_MASK);
+ if (disable_mask) {
+ /*
+ * If disable_mask is set, mask_value is used as an
+ * additional 2 byte Compare Value; that is equivalent
+ * to using the whole cr0 register as the comparison value.
+ * Load 32 bits of data from rx_buf, and set mask to
+ * all-ones so we compare all 32 bits.
+ */
+ rx_cmp = ldl_le_p(rxbuf_ptr + offset);
+ mask = 0xFFFFFFFF;
+ compare = cr0;
+ } else {
+ rx_cmp = lduw_le_p(rxbuf_ptr + offset);
+ mask = FIELD_EX32(cr0, TYPE2_COMPARE_0_WORD_0, MASK_VALUE);
+ compare =
+ FIELD_EX32(cr0, TYPE2_COMPARE_0_WORD_0, COMPARE_VALUE);
+ }
if ((rx_cmp & mask) == (compare & mask)) {
matched = true;
--
2.34.1