From: Jim Shu <jim.shu@sifive.com>
Add a new struct RISCVBootInfo to sync boot information between multiple
boot functions.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241120153935.24706-3-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
include/hw/riscv/boot.h | 25 ++++++++++-----
hw/riscv/boot.c | 65 ++++++++++++++++++++++----------------
hw/riscv/microchip_pfsoc.c | 11 ++++---
hw/riscv/opentitan.c | 4 ++-
hw/riscv/sifive_e.c | 4 ++-
hw/riscv/sifive_u.c | 12 ++++---
hw/riscv/spike.c | 12 ++++---
hw/riscv/virt.c | 13 +++++---
8 files changed, 90 insertions(+), 56 deletions(-)
diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index 34a80c5ff4..06b51ed086 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -27,11 +27,20 @@
#define RISCV32_BIOS_BIN "opensbi-riscv32-generic-fw_dynamic.bin"
#define RISCV64_BIOS_BIN "opensbi-riscv64-generic-fw_dynamic.bin"
+typedef struct RISCVBootInfo {
+ ssize_t kernel_size;
+ hwaddr image_low_addr;
+ hwaddr image_high_addr;
+
+ bool is_32bit;
+} RISCVBootInfo;
+
bool riscv_is_32bit(RISCVHartArrayState *harts);
char *riscv_plic_hart_config_string(int hart_count);
-target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts,
+void riscv_boot_info_init(RISCVBootInfo *info, RISCVHartArrayState *harts);
+target_ulong riscv_calc_kernel_start_addr(RISCVBootInfo *info,
target_ulong firmware_end_addr);
target_ulong riscv_find_and_load_firmware(MachineState *machine,
const char *default_machine_firmware,
@@ -43,13 +52,13 @@ char *riscv_find_firmware(const char *firmware_filename,
target_ulong riscv_load_firmware(const char *firmware_filename,
hwaddr *firmware_load_addr,
symbol_fn_t sym_cb);
-target_ulong riscv_load_kernel(MachineState *machine,
- RISCVHartArrayState *harts,
- target_ulong firmware_end_addr,
- bool load_initrd,
- symbol_fn_t sym_cb);
-uint64_t riscv_compute_fdt_addr(hwaddr dram_start, uint64_t dram_size,
- MachineState *ms, RISCVHartArrayState *harts);
+void riscv_load_kernel(MachineState *machine,
+ RISCVBootInfo *info,
+ target_ulong kernel_start_addr,
+ bool load_initrd,
+ symbol_fn_t sym_cb);
+uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size,
+ MachineState *ms, RISCVBootInfo *info);
void riscv_load_fdt(hwaddr fdt_addr, void *fdt);
void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts,
hwaddr saddr,
diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index d36d3a7104..81d27f935e 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -67,9 +67,15 @@ char *riscv_plic_hart_config_string(int hart_count)
return g_strjoinv(",", (char **)vals);
}
-target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts,
+void riscv_boot_info_init(RISCVBootInfo *info, RISCVHartArrayState *harts)
+{
+ info->kernel_size = 0;
+ info->is_32bit = riscv_is_32bit(harts);
+}
+
+target_ulong riscv_calc_kernel_start_addr(RISCVBootInfo *info,
target_ulong firmware_end_addr) {
- if (riscv_is_32bit(harts)) {
+ if (info->is_32bit) {
return QEMU_ALIGN_UP(firmware_end_addr, 4 * MiB);
} else {
return QEMU_ALIGN_UP(firmware_end_addr, 2 * MiB);
@@ -175,7 +181,7 @@ target_ulong riscv_load_firmware(const char *firmware_filename,
exit(1);
}
-static void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry)
+static void riscv_load_initrd(MachineState *machine, RISCVBootInfo *info)
{
const char *filename = machine->initrd_filename;
uint64_t mem_size = machine->ram_size;
@@ -196,7 +202,7 @@ static void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry)
* halfway into RAM, and for boards with 1GB of RAM or more we put
* the initrd at 512MB.
*/
- start = kernel_entry + MIN(mem_size / 2, 512 * MiB);
+ start = info->image_low_addr + MIN(mem_size / 2, 512 * MiB);
size = load_ramdisk(filename, start, mem_size - start);
if (size == -1) {
@@ -215,14 +221,14 @@ static void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry)
}
}
-target_ulong riscv_load_kernel(MachineState *machine,
- RISCVHartArrayState *harts,
- target_ulong kernel_start_addr,
- bool load_initrd,
- symbol_fn_t sym_cb)
+void riscv_load_kernel(MachineState *machine,
+ RISCVBootInfo *info,
+ target_ulong kernel_start_addr,
+ bool load_initrd,
+ symbol_fn_t sym_cb)
{
const char *kernel_filename = machine->kernel_filename;
- uint64_t kernel_load_base, kernel_entry;
+ ssize_t kernel_size;
void *fdt = machine->fdt;
g_assert(kernel_filename != NULL);
@@ -234,21 +240,28 @@ target_ulong riscv_load_kernel(MachineState *machine,
* the (expected) load address load address. This allows kernels to have
* separate SBI and ELF entry points (used by FreeBSD, for example).
*/
- if (load_elf_ram_sym(kernel_filename, NULL, NULL, NULL,
- NULL, &kernel_load_base, NULL, NULL, 0,
- EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) {
- kernel_entry = kernel_load_base;
+ kernel_size = load_elf_ram_sym(kernel_filename, NULL, NULL, NULL, NULL,
+ &info->image_low_addr, &info->image_high_addr,
+ NULL, 0, EM_RISCV, 1, 0, NULL, true, sym_cb);
+ if (kernel_size > 0) {
+ info->kernel_size = kernel_size;
goto out;
}
- if (load_uimage_as(kernel_filename, &kernel_entry, NULL, NULL,
- NULL, NULL, NULL) > 0) {
+ kernel_size = load_uimage_as(kernel_filename, &info->image_low_addr,
+ NULL, NULL, NULL, NULL, NULL);
+ if (kernel_size > 0) {
+ info->kernel_size = kernel_size;
+ info->image_high_addr = info->image_low_addr + kernel_size;
goto out;
}
- if (load_image_targphys_as(kernel_filename, kernel_start_addr,
- current_machine->ram_size, NULL) > 0) {
- kernel_entry = kernel_start_addr;
+ kernel_size = load_image_targphys_as(kernel_filename, kernel_start_addr,
+ current_machine->ram_size, NULL);
+ if (kernel_size > 0) {
+ info->kernel_size = kernel_size;
+ info->image_low_addr = kernel_start_addr;
+ info->image_high_addr = info->image_low_addr + kernel_size;
goto out;
}
@@ -257,23 +270,21 @@ target_ulong riscv_load_kernel(MachineState *machine,
out:
/*
- * For 32 bit CPUs 'kernel_entry' can be sign-extended by
+ * For 32 bit CPUs 'image_low_addr' can be sign-extended by
* load_elf_ram_sym().
*/
- if (riscv_is_32bit(harts)) {
- kernel_entry = extract64(kernel_entry, 0, 32);
+ if (info->is_32bit) {
+ info->image_low_addr = extract64(info->image_low_addr, 0, 32);
}
if (load_initrd && machine->initrd_filename) {
- riscv_load_initrd(machine, kernel_entry);
+ riscv_load_initrd(machine, info);
}
if (fdt && machine->kernel_cmdline && *machine->kernel_cmdline) {
qemu_fdt_setprop_string(fdt, "/chosen", "bootargs",
machine->kernel_cmdline);
}
-
- return kernel_entry;
}
/*
@@ -293,7 +304,7 @@ out:
* The FDT is fdt_packed() during the calculation.
*/
uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size,
- MachineState *ms, RISCVHartArrayState *harts)
+ MachineState *ms, RISCVBootInfo *info)
{
int ret = fdt_pack(ms->fdt);
hwaddr dram_end, temp;
@@ -321,7 +332,7 @@ uint64_t riscv_compute_fdt_addr(hwaddr dram_base, hwaddr dram_size,
* Thus, put it near to the end of dram in RV64, and put it near to the end
* of dram or 3GB whichever is lesser in RV32.
*/
- if (!riscv_is_32bit(harts)) {
+ if (!info->is_32bit) {
temp = dram_end;
} else {
temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end;
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index ba8b0a2c26..a302965b6d 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -521,6 +521,7 @@ static void microchip_icicle_kit_machine_init(MachineState *machine)
uint64_t kernel_entry;
uint64_t fdt_load_addr;
DriveInfo *dinfo = drive_get(IF_SD, 0, 0);
+ RISCVBootInfo boot_info;
/* Sanity check on RAM size */
if (machine->ram_size < mc->default_ram_size) {
@@ -615,17 +616,19 @@ static void microchip_icicle_kit_machine_init(MachineState *machine)
firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
&firmware_load_addr, NULL);
+ riscv_boot_info_init(&boot_info, &s->soc.u_cpus);
if (kernel_as_payload) {
- kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus,
+ kernel_start_addr = riscv_calc_kernel_start_addr(&boot_info,
firmware_end_addr);
- kernel_entry = riscv_load_kernel(machine, &s->soc.u_cpus,
- kernel_start_addr, true, NULL);
+ riscv_load_kernel(machine, &boot_info, kernel_start_addr,
+ true, NULL);
+ kernel_entry = boot_info.image_low_addr;
/* Compute the fdt load address in dram */
fdt_load_addr = riscv_compute_fdt_addr(memmap[MICROCHIP_PFSOC_DRAM_LO].base,
memmap[MICROCHIP_PFSOC_DRAM_LO].size,
- machine, &s->soc.u_cpus);
+ machine, &boot_info);
riscv_load_fdt(fdt_load_addr, machine->fdt);
/* Load the reset vector */
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index 8ce85ea9f7..87ad9c8f34 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -81,6 +81,7 @@ static void opentitan_machine_init(MachineState *machine)
OpenTitanState *s = OPENTITAN_MACHINE(machine);
const MemMapEntry *memmap = ibex_memmap;
MemoryRegion *sys_mem = get_system_memory();
+ RISCVBootInfo boot_info;
if (machine->ram_size != mc->default_ram_size) {
char *sz = size_to_str(mc->default_ram_size);
@@ -102,8 +103,9 @@ static void opentitan_machine_init(MachineState *machine)
riscv_load_firmware(machine->firmware, &firmware_load_addr, NULL);
}
+ riscv_boot_info_init(&boot_info, &s->soc.cpus);
if (machine->kernel_filename) {
- riscv_load_kernel(machine, &s->soc.cpus,
+ riscv_load_kernel(machine, &boot_info,
memmap[IBEX_DEV_RAM].base,
false, NULL);
}
diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
index 5a1959f2a9..ebcd33ab95 100644
--- a/hw/riscv/sifive_e.c
+++ b/hw/riscv/sifive_e.c
@@ -78,6 +78,7 @@ static void sifive_e_machine_init(MachineState *machine)
SiFiveEState *s = RISCV_E_MACHINE(machine);
MemoryRegion *sys_mem = get_system_memory();
int i;
+ RISCVBootInfo boot_info;
if (machine->ram_size != mc->default_ram_size) {
char *sz = size_to_str(mc->default_ram_size);
@@ -113,8 +114,9 @@ static void sifive_e_machine_init(MachineState *machine)
rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
memmap[SIFIVE_E_DEV_MROM].base, &address_space_memory);
+ riscv_boot_info_init(&boot_info, &s->soc.cpus);
if (machine->kernel_filename) {
- riscv_load_kernel(machine, &s->soc.cpus,
+ riscv_load_kernel(machine, &boot_info,
memmap[SIFIVE_E_DEV_DTIM].base,
false, NULL);
}
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index fd59124500..6270e1ccec 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -526,6 +526,7 @@ static void sifive_u_machine_init(MachineState *machine)
BlockBackend *blk;
DeviceState *flash_dev, *sd_dev, *card_dev;
qemu_irq flash_cs, sd_cs;
+ RISCVBootInfo boot_info;
/* Initialize SoC */
object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC);
@@ -591,12 +592,13 @@ static void sifive_u_machine_init(MachineState *machine)
firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
&start_addr, NULL);
+ riscv_boot_info_init(&boot_info, &s->soc.u_cpus);
if (machine->kernel_filename) {
- kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus,
+ kernel_start_addr = riscv_calc_kernel_start_addr(&boot_info,
firmware_end_addr);
-
- kernel_entry = riscv_load_kernel(machine, &s->soc.u_cpus,
- kernel_start_addr, true, NULL);
+ riscv_load_kernel(machine, &boot_info, kernel_start_addr,
+ true, NULL);
+ kernel_entry = boot_info.image_low_addr;
} else {
/*
* If dynamic firmware is used, it doesn't know where is the next mode
@@ -607,7 +609,7 @@ static void sifive_u_machine_init(MachineState *machine)
fdt_load_addr = riscv_compute_fdt_addr(memmap[SIFIVE_U_DEV_DRAM].base,
memmap[SIFIVE_U_DEV_DRAM].size,
- machine, &s->soc.u_cpus);
+ machine, &boot_info);
riscv_load_fdt(fdt_load_addr, machine->fdt);
if (!riscv_is_32bit(&s->soc.u_cpus)) {
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index acd7ab1ae1..c3ad16d316 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -206,6 +206,7 @@ static void spike_board_init(MachineState *machine)
char *soc_name;
int i, base_hartid, hart_count;
bool htif_custom_base = false;
+ RISCVBootInfo boot_info;
/* Check socket count limit */
if (SPIKE_SOCKETS_MAX < riscv_socket_count(machine)) {
@@ -300,13 +301,14 @@ static void spike_board_init(MachineState *machine)
create_fdt(s, memmap, riscv_is_32bit(&s->soc[0]), htif_custom_base);
/* Load kernel */
+ riscv_boot_info_init(&boot_info, &s->soc[0]);
if (machine->kernel_filename) {
- kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0],
+ kernel_start_addr = riscv_calc_kernel_start_addr(&boot_info,
firmware_end_addr);
- kernel_entry = riscv_load_kernel(machine, &s->soc[0],
- kernel_start_addr,
- true, htif_symbol_callback);
+ riscv_load_kernel(machine, &boot_info, kernel_start_addr,
+ true, htif_symbol_callback);
+ kernel_entry = boot_info.image_low_addr;
} else {
/*
* If dynamic firmware is used, it doesn't know where is the next mode
@@ -317,7 +319,7 @@ static void spike_board_init(MachineState *machine)
fdt_load_addr = riscv_compute_fdt_addr(memmap[SPIKE_DRAM].base,
memmap[SPIKE_DRAM].size,
- machine, &s->soc[0]);
+ machine, &boot_info);
riscv_load_fdt(fdt_load_addr, machine->fdt);
/* load the reset vector */
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 98da79a5be..d2bfdec56a 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -1434,6 +1434,7 @@ static void virt_machine_done(Notifier *notifier, void *data)
uint64_t fdt_load_addr;
uint64_t kernel_entry = 0;
BlockBackend *pflash_blk0;
+ RISCVBootInfo boot_info;
/*
* An user provided dtb must include everything, including
@@ -1482,17 +1483,19 @@ static void virt_machine_done(Notifier *notifier, void *data)
}
}
+ riscv_boot_info_init(&boot_info, &s->soc[0]);
+
if (machine->kernel_filename && !kernel_entry) {
- kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0],
+ kernel_start_addr = riscv_calc_kernel_start_addr(&boot_info,
firmware_end_addr);
-
- kernel_entry = riscv_load_kernel(machine, &s->soc[0],
- kernel_start_addr, true, NULL);
+ riscv_load_kernel(machine, &boot_info, kernel_start_addr,
+ true, NULL);
+ kernel_entry = boot_info.image_low_addr;
}
fdt_load_addr = riscv_compute_fdt_addr(memmap[VIRT_DRAM].base,
memmap[VIRT_DRAM].size,
- machine, &s->soc[0]);
+ machine, &boot_info);
riscv_load_fdt(fdt_load_addr, machine->fdt);
/* load the reset vector */
--
2.47.1