From: Alexander Graf <graf@amazon.com>
Some boards such as vmapple don't do real legacy PCI IRQ swizzling.
Instead, they just keep allocating more board IRQ lines for each new
legacy IRQ. Let's support that mode by giving instantiators a new
"nr_irqs" property they can use to support more than 4 legacy IRQ lines.
In this mode, GPEX will export more IRQ lines, one for each device.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
---
v4:
* Turned pair of IRQ arrays into array of structs.
* Simplified swizzling logic selection.
v12:
* Fixed uses of deleted GPEX_NUM_IRQS constant that have been
added to QEMU since this patch was originally written.
hw/arm/sbsa-ref.c | 2 +-
hw/arm/virt.c | 2 +-
hw/i386/microvm.c | 2 +-
hw/loongarch/virt.c | 12 +++++------
hw/mips/loongson3_virt.c | 2 +-
hw/openrisc/virt.c | 12 +++++------
hw/pci-host/gpex.c | 43 ++++++++++++++++++++++++++++++--------
hw/riscv/virt.c | 12 +++++------
hw/xen/xen-pvh-common.c | 2 +-
hw/xtensa/virt.c | 2 +-
include/hw/pci-host/gpex.h | 7 +++----
11 files changed, 61 insertions(+), 37 deletions(-)
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index e3195d54497..7e7322486c2 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -673,7 +673,7 @@ static void create_pcie(SBSAMachineState *sms)
/* Map IO port space */
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio);
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ for (i = 0; i < PCI_NUM_PINS; i++) {
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
qdev_get_gpio_in(sms->gic, irq + i));
gpex_set_irq_num(GPEX_HOST(dev), i, irq + i);
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 1a381e9a2bd..8aa22ea3155 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1547,7 +1547,7 @@ static void create_pcie(VirtMachineState *vms)
/* Map IO port space */
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio);
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ for (i = 0; i < PCI_NUM_PINS; i++) {
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
qdev_get_gpio_in(vms->gic, irq + i));
gpex_set_irq_num(GPEX_HOST(dev), i, irq + i);
diff --git a/hw/i386/microvm.c b/hw/i386/microvm.c
index 86637afa0f3..ce80596c239 100644
--- a/hw/i386/microvm.c
+++ b/hw/i386/microvm.c
@@ -139,7 +139,7 @@ static void create_gpex(MicrovmMachineState *mms)
mms->gpex.mmio64.base, mmio64_alias);
}
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ for (i = 0; i < PCI_NUM_PINS; i++) {
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
x86ms->gsi[mms->gpex.irq + i]);
}
diff --git a/hw/loongarch/virt.c b/hw/loongarch/virt.c
index 9a635d1d3d3..1d71982c722 100644
--- a/hw/loongarch/virt.c
+++ b/hw/loongarch/virt.c
@@ -441,7 +441,7 @@ static void fdt_add_pcie_irq_map_node(const LoongArchVirtMachineState *lvms,
{
int pin, dev;
uint32_t irq_map_stride = 0;
- uint32_t full_irq_map[GPEX_NUM_IRQS *GPEX_NUM_IRQS * 10] = {};
+ uint32_t full_irq_map[PCI_NUM_PINS * PCI_NUM_PINS * 10] = {};
uint32_t *irq_map = full_irq_map;
const MachineState *ms = MACHINE(lvms);
@@ -454,11 +454,11 @@ static void fdt_add_pcie_irq_map_node(const LoongArchVirtMachineState *lvms,
* to wrap to any number of devices.
*/
- for (dev = 0; dev < GPEX_NUM_IRQS; dev++) {
+ for (dev = 0; dev < PCI_NUM_PINS; dev++) {
int devfn = dev * 0x8;
- for (pin = 0; pin < GPEX_NUM_IRQS; pin++) {
- int irq_nr = 16 + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS);
+ for (pin = 0; pin < PCI_NUM_PINS; pin++) {
+ int irq_nr = 16 + ((pin + PCI_SLOT(devfn)) % PCI_NUM_PINS);
int i = 0;
/* Fill PCI address cells */
@@ -482,7 +482,7 @@ static void fdt_add_pcie_irq_map_node(const LoongArchVirtMachineState *lvms,
qemu_fdt_setprop(ms->fdt, nodename, "interrupt-map", full_irq_map,
- GPEX_NUM_IRQS * GPEX_NUM_IRQS *
+ PCI_NUM_PINS * PCI_NUM_PINS *
irq_map_stride * sizeof(uint32_t));
qemu_fdt_setprop_cells(ms->fdt, nodename, "interrupt-map-mask",
0x1800, 0, 0, 0x7);
@@ -741,7 +741,7 @@ static void virt_devices_init(DeviceState *pch_pic,
memory_region_add_subregion(get_system_memory(), VIRT_PCI_IO_BASE,
pio_alias);
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ for (i = 0; i < PCI_NUM_PINS; i++) {
sysbus_connect_irq(d, i,
qdev_get_gpio_in(pch_pic, 16 + i));
gpex_set_irq_num(GPEX_HOST(gpex_dev), i, 16 + i);
diff --git a/hw/mips/loongson3_virt.c b/hw/mips/loongson3_virt.c
index f3b6326cc59..884b5f23a99 100644
--- a/hw/mips/loongson3_virt.c
+++ b/hw/mips/loongson3_virt.c
@@ -458,7 +458,7 @@ static inline void loongson3_virt_devices_init(MachineState *machine,
virt_memmap[VIRT_PCIE_PIO].base, s->pio_alias);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, virt_memmap[VIRT_PCIE_PIO].base);
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ for (i = 0; i < PCI_NUM_PINS; i++) {
irq = qdev_get_gpio_in(pic, PCIE_IRQ_BASE + i);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ_BASE + i);
diff --git a/hw/openrisc/virt.c b/hw/openrisc/virt.c
index 47d2c9bd3c7..6f053bf48e0 100644
--- a/hw/openrisc/virt.c
+++ b/hw/openrisc/virt.c
@@ -318,7 +318,7 @@ static void create_pcie_irq_map(void *fdt, char *nodename, int irq_base,
{
int pin, dev;
uint32_t irq_map_stride = 0;
- uint32_t full_irq_map[GPEX_NUM_IRQS * GPEX_NUM_IRQS * 6] = {};
+ uint32_t full_irq_map[PCI_NUM_PINS * PCI_NUM_PINS * 6] = {};
uint32_t *irq_map = full_irq_map;
/*
@@ -330,11 +330,11 @@ static void create_pcie_irq_map(void *fdt, char *nodename, int irq_base,
* possible slot) seeing the interrupt-map-mask will allow the table
* to wrap to any number of devices.
*/
- for (dev = 0; dev < GPEX_NUM_IRQS; dev++) {
+ for (dev = 0; dev < PCI_NUM_PINS; dev++) {
int devfn = dev << 3;
- for (pin = 0; pin < GPEX_NUM_IRQS; pin++) {
- int irq_nr = irq_base + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS);
+ for (pin = 0; pin < PCI_NUM_PINS; pin++) {
+ int irq_nr = irq_base + ((pin + PCI_SLOT(devfn)) % PCI_NUM_PINS);
int i = 0;
/* Fill PCI address cells */
@@ -357,7 +357,7 @@ static void create_pcie_irq_map(void *fdt, char *nodename, int irq_base,
}
qemu_fdt_setprop(fdt, nodename, "interrupt-map", full_irq_map,
- GPEX_NUM_IRQS * GPEX_NUM_IRQS *
+ PCI_NUM_PINS * PCI_NUM_PINS *
irq_map_stride * sizeof(uint32_t));
qemu_fdt_setprop_cells(fdt, nodename, "interrupt-map-mask",
@@ -409,7 +409,7 @@ static void openrisc_virt_pcie_init(OR1KVirtState *state,
memory_region_add_subregion(get_system_memory(), pio_base, alias);
/* Connect IRQ lines. */
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ for (i = 0; i < PCI_NUM_PINS; i++) {
pcie_irq = get_per_cpu_irq(cpus, num_cpus, irq_base + i);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pcie_irq);
diff --git a/hw/pci-host/gpex.c b/hw/pci-host/gpex.c
index e9cf455bf52..cd63aa2d3cf 100644
--- a/hw/pci-host/gpex.c
+++ b/hw/pci-host/gpex.c
@@ -32,6 +32,7 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/irq.h"
+#include "hw/pci/pci_bus.h"
#include "hw/pci-host/gpex.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
@@ -41,20 +42,25 @@
* GPEX host
*/
+struct GPEXIrq {
+ qemu_irq irq;
+ int irq_num;
+};
+
static void gpex_set_irq(void *opaque, int irq_num, int level)
{
GPEXHost *s = opaque;
- qemu_set_irq(s->irq[irq_num], level);
+ qemu_set_irq(s->irq[irq_num].irq, level);
}
int gpex_set_irq_num(GPEXHost *s, int index, int gsi)
{
- if (index >= GPEX_NUM_IRQS) {
+ if (index >= s->num_irqs) {
return -EINVAL;
}
- s->irq_num[index] = gsi;
+ s->irq[index].irq_num = gsi;
return 0;
}
@@ -62,7 +68,7 @@ static PCIINTxRoute gpex_route_intx_pin_to_irq(void *opaque, int pin)
{
PCIINTxRoute route;
GPEXHost *s = opaque;
- int gsi = s->irq_num[pin];
+ int gsi = s->irq[pin].irq_num;
route.irq = gsi;
if (gsi < 0) {
@@ -74,6 +80,13 @@ static PCIINTxRoute gpex_route_intx_pin_to_irq(void *opaque, int pin)
return route;
}
+static int gpex_swizzle_map_irq_fn(PCIDevice *pci_dev, int pin)
+{
+ PCIBus *bus = pci_device_root_bus(pci_dev);
+
+ return (PCI_SLOT(pci_dev->devfn) + pin) % bus->nirq;
+}
+
static void gpex_host_realize(DeviceState *dev, Error **errp)
{
PCIHostState *pci = PCI_HOST_BRIDGE(dev);
@@ -82,6 +95,8 @@ static void gpex_host_realize(DeviceState *dev, Error **errp)
PCIExpressHost *pex = PCIE_HOST_BRIDGE(dev);
int i;
+ s->irq = g_malloc0_n(s->num_irqs, sizeof(*s->irq));
+
pcie_host_mmcfg_init(pex, PCIE_MMCFG_SIZE_MAX);
sysbus_init_mmio(sbd, &pex->mmio);
@@ -128,19 +143,27 @@ static void gpex_host_realize(DeviceState *dev, Error **errp)
sysbus_init_mmio(sbd, &s->io_ioport);
}
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
- sysbus_init_irq(sbd, &s->irq[i]);
- s->irq_num[i] = -1;
+ for (i = 0; i < s->num_irqs; i++) {
+ sysbus_init_irq(sbd, &s->irq[i].irq);
+ s->irq[i].irq_num = -1;
}
pci->bus = pci_register_root_bus(dev, "pcie.0", gpex_set_irq,
- pci_swizzle_map_irq_fn, s, &s->io_mmio,
- &s->io_ioport, 0, 4, TYPE_PCIE_BUS);
+ gpex_swizzle_map_irq_fn,
+ s, &s->io_mmio, &s->io_ioport, 0,
+ s->num_irqs, TYPE_PCIE_BUS);
pci_bus_set_route_irq_fn(pci->bus, gpex_route_intx_pin_to_irq);
qdev_realize(DEVICE(&s->gpex_root), BUS(pci->bus), &error_fatal);
}
+static void gpex_host_unrealize(DeviceState *dev)
+{
+ GPEXHost *s = GPEX_HOST(dev);
+
+ g_free(s->irq);
+}
+
static const char *gpex_host_root_bus_path(PCIHostState *host_bridge,
PCIBus *rootbus)
{
@@ -166,6 +189,7 @@ static Property gpex_host_properties[] = {
gpex_cfg.mmio64.base, 0),
DEFINE_PROP_SIZE(PCI_HOST_ABOVE_4G_MMIO_SIZE, GPEXHost,
gpex_cfg.mmio64.size, 0),
+ DEFINE_PROP_UINT8("num-irqs", GPEXHost, num_irqs, PCI_NUM_PINS),
DEFINE_PROP_END_OF_LIST(),
};
@@ -176,6 +200,7 @@ static void gpex_host_class_init(ObjectClass *klass, void *data)
hc->root_bus_path = gpex_host_root_bus_path;
dc->realize = gpex_host_realize;
+ dc->unrealize = gpex_host_unrealize;
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
dc->fw_name = "pci";
device_class_set_props(dc, gpex_host_properties);
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 45a8c4f8190..567fe92a136 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -168,7 +168,7 @@ static void create_pcie_irq_map(RISCVVirtState *s, void *fdt, char *nodename,
{
int pin, dev;
uint32_t irq_map_stride = 0;
- uint32_t full_irq_map[GPEX_NUM_IRQS * GPEX_NUM_IRQS *
+ uint32_t full_irq_map[PCI_NUM_PINS * PCI_NUM_PINS *
FDT_MAX_INT_MAP_WIDTH] = {};
uint32_t *irq_map = full_irq_map;
@@ -180,11 +180,11 @@ static void create_pcie_irq_map(RISCVVirtState *s, void *fdt, char *nodename,
* possible slot) seeing the interrupt-map-mask will allow the table
* to wrap to any number of devices.
*/
- for (dev = 0; dev < GPEX_NUM_IRQS; dev++) {
+ for (dev = 0; dev < PCI_NUM_PINS; dev++) {
int devfn = dev * 0x8;
- for (pin = 0; pin < GPEX_NUM_IRQS; pin++) {
- int irq_nr = PCIE_IRQ + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS);
+ for (pin = 0; pin < PCI_NUM_PINS; pin++) {
+ int irq_nr = PCIE_IRQ + ((pin + PCI_SLOT(devfn)) % PCI_NUM_PINS);
int i = 0;
/* Fill PCI address cells */
@@ -210,7 +210,7 @@ static void create_pcie_irq_map(RISCVVirtState *s, void *fdt, char *nodename,
}
qemu_fdt_setprop(fdt, nodename, "interrupt-map", full_irq_map,
- GPEX_NUM_IRQS * GPEX_NUM_IRQS *
+ PCI_NUM_PINS * PCI_NUM_PINS *
irq_map_stride * sizeof(uint32_t));
qemu_fdt_setprop_cells(fdt, nodename, "interrupt-map-mask",
@@ -1182,7 +1182,7 @@ static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem,
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, pio_base);
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ for (i = 0; i < PCI_NUM_PINS; i++) {
irq = qdev_get_gpio_in(irqchip, PCIE_IRQ + i);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
diff --git a/hw/xen/xen-pvh-common.c b/hw/xen/xen-pvh-common.c
index 218ac851cf7..9143b54d826 100644
--- a/hw/xen/xen-pvh-common.c
+++ b/hw/xen/xen-pvh-common.c
@@ -169,7 +169,7 @@ static inline void xenpvh_gpex_init(XenPVHMachineState *s,
*/
assert(xpc->set_pci_intx_irq);
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ for (i = 0; i < PCI_NUM_PINS; i++) {
qemu_irq irq = qemu_allocate_irq(xpc->set_pci_intx_irq, s, i);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
diff --git a/hw/xtensa/virt.c b/hw/xtensa/virt.c
index 5310a888613..8f5c2009d29 100644
--- a/hw/xtensa/virt.c
+++ b/hw/xtensa/virt.c
@@ -93,7 +93,7 @@ static void create_pcie(MachineState *ms, CPUXtensaState *env, int irq_base,
/* Connect IRQ lines. */
extints = xtensa_get_extints(env);
- for (i = 0; i < GPEX_NUM_IRQS; i++) {
+ for (i = 0; i < PCI_NUM_PINS; i++) {
void *q = extints[irq_base + i];
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, q);
diff --git a/include/hw/pci-host/gpex.h b/include/hw/pci-host/gpex.h
index dce883573ba..84471533af0 100644
--- a/include/hw/pci-host/gpex.h
+++ b/include/hw/pci-host/gpex.h
@@ -32,8 +32,6 @@ OBJECT_DECLARE_SIMPLE_TYPE(GPEXHost, GPEX_HOST)
#define TYPE_GPEX_ROOT_DEVICE "gpex-root"
OBJECT_DECLARE_SIMPLE_TYPE(GPEXRootState, GPEX_ROOT_DEVICE)
-#define GPEX_NUM_IRQS 4
-
struct GPEXRootState {
/*< private >*/
PCIDevice parent_obj;
@@ -49,6 +47,7 @@ struct GPEXConfig {
PCIBus *bus;
};
+typedef struct GPEXIrq GPEXIrq;
struct GPEXHost {
/*< private >*/
PCIExpressHost parent_obj;
@@ -60,8 +59,8 @@ struct GPEXHost {
MemoryRegion io_mmio;
MemoryRegion io_ioport_window;
MemoryRegion io_mmio_window;
- qemu_irq irq[GPEX_NUM_IRQS];
- int irq_num[GPEX_NUM_IRQS];
+ GPEXIrq *irq;
+ uint8_t num_irqs;
bool allow_unmapped_accesses;
--
2.39.5 (Apple Git-154)On 2024/11/30 0:25, Phil Dennis-Jordan wrote: > From: Alexander Graf <graf@amazon.com> > > Some boards such as vmapple don't do real legacy PCI IRQ swizzling. > Instead, they just keep allocating more board IRQ lines for each new > legacy IRQ. Let's support that mode by giving instantiators a new > "nr_irqs" property they can use to support more than 4 legacy IRQ lines. > In this mode, GPEX will export more IRQ lines, one for each device. > > Signed-off-by: Alexander Graf <graf@amazon.com> > Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu> > Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
© 2016 - 2024 Red Hat, Inc.