From: Jamin Lin <jamin_lin@aspeedtech.com>

The RTC controller between AST2600 and AST2700 are identical. Add RTC model for
AST2700 RTC support. The RTC controller registers base address is start at
0x12C0_F000 and its alarm interrupt is connected to GICINT13.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
 hw/arm/aspeed_ast27x0.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 7b2464409521..63d1fcb086d7 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -64,6 +64,7 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
     [ASPEED_DEV_ADC]       =  0x14C00000,
     [ASPEED_DEV_I2C]       =  0x14C0F000,
     [ASPEED_DEV_GPIO]      =  0x14C0B000,
+    [ASPEED_DEV_RTC]       =  0x12C0F000,
 };
 
 #define AST2700_MAX_IRQ 256
@@ -377,6 +378,8 @@ static void aspeed_soc_ast2700_init(Object *obj)
 
     snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname);
     object_initialize_child(obj, "gpio", &s->gpio, typename);
+
+    object_initialize_child(obj, "rtc", &s->rtc, TYPE_ASPEED_RTC);
 }
 
 /*
@@ -670,6 +673,14 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0,
                        aspeed_soc_get_irq(s, ASPEED_DEV_GPIO));
 
+    /* RTC */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->rtc), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->rtc), 0, sc->memmap[ASPEED_DEV_RTC]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0,
+                       aspeed_soc_get_irq(s, ASPEED_DEV_RTC));
+
     create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
     create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
     create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
-- 
2.47.0