From: Jamin Lin <jamin_lin@aspeedtech.com>

Currently, the default fmc_model was "sst25vf032b" whose size was 4MB for
ast1030-a1 EVB. However, according to the schematic of ast1030-a1 EVB,
ASPEED shipped default flash of fmc_cs0 and fmc_cs1 were "w25q80bl" and
"w25q256", respectively. The size of w25q80bl is 1MB and the size of w25q256
is 32MB.

The fmc_cs0 was connected to AST1030 A1 internal flash and the fmc_cs1 was
connected to external flash. The internal flash could not be changed because
it was placed into AST1030 A1 chip. Users only can change fmc_cs1 external
flash.

So far, only supports to set the default fmc_model for all chip select pins.
In other words, users cannot set the different default flash model for
fmc_cs0 and fmc_cs1, respectively.

Correct fmc_model default flash to w25q80bl the same as AST1030 A1
internal flash for ast1030-a1 EVB.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
 hw/arm/aspeed.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index bf68224295f8..b4b1ce9efb2b 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -1642,7 +1642,7 @@ static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc,
     mc->init = aspeed_minibmc_machine_init;
     amc->i2c_init = ast1030_evb_i2c_init;
     mc->default_ram_size = 0;
-    amc->fmc_model = "sst25vf032b";
+    amc->fmc_model = "w25q80bl";
     amc->spi_model = "w25q256";
     amc->num_cs = 2;
     amc->macs_mask = 0;
-- 
2.47.0