From: Jared Rossi <jrossi@linux.ibm.com>
Remove panic-on-error from ECKD block device IPL specific functions so that
error recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-9-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
pc-bios/s390-ccw/bootmap.h | 1 +
pc-bios/s390-ccw/bootmap.c | 187 +++++++++++++++++++++++++------------
2 files changed, 130 insertions(+), 58 deletions(-)
diff --git a/pc-bios/s390-ccw/bootmap.h b/pc-bios/s390-ccw/bootmap.h
index 3cb573b86b..95943441d3 100644
--- a/pc-bios/s390-ccw/bootmap.h
+++ b/pc-bios/s390-ccw/bootmap.h
@@ -16,6 +16,7 @@
typedef uint64_t block_number_t;
#define NULL_BLOCK_NR 0xffffffffffffffffULL
+#define ERROR_BLOCK_NR 0xfffffffffffffffeULL
#define FREE_SPACE_FILLER '\xAA'
diff --git a/pc-bios/s390-ccw/bootmap.c b/pc-bios/s390-ccw/bootmap.c
index af73254acb..b9596e28c7 100644
--- a/pc-bios/s390-ccw/bootmap.c
+++ b/pc-bios/s390-ccw/bootmap.c
@@ -145,14 +145,17 @@ static block_number_t load_eckd_segments(block_number_t blk, bool ldipl,
bool more_data;
memset(_bprs, FREE_SPACE_FILLER, sizeof(_bprs));
- read_block(blk, bprs, "BPRS read failed");
+ if (virtio_read(blk, bprs)) {
+ puts("BPRS read failed");
+ return ERROR_BLOCK_NR;
+ }
do {
more_data = false;
for (j = 0;; j++) {
block_nr = gen_eckd_block_num(&bprs[j].xeckd, ldipl);
if (is_null_block_number(block_nr)) { /* end of chunk */
- break;
+ return NULL_BLOCK_NR;
}
/* we need the updated blockno for the next indirect entry
@@ -163,15 +166,20 @@ static block_number_t load_eckd_segments(block_number_t blk, bool ldipl,
}
/* List directed pointer does not store block size */
- IPL_assert(ldipl || block_size_ok(bprs[j].xeckd.bptr.size),
- "bad chunk block size");
+ if (!ldipl && !block_size_ok(bprs[j].xeckd.bptr.size)) {
+ puts("Bad chunk block size");
+ return ERROR_BLOCK_NR;
+ }
if (!eckd_valid_address(&bprs[j].xeckd, ldipl)) {
/*
* If an invalid address is found during LD-IPL then break and
- * retry as CCW
+ * retry as CCW-IPL, otherwise abort on error
*/
- IPL_assert(ldipl, "bad chunk ECKD addr");
+ if (!ldipl) {
+ puts("Bad chunk ECKD address");
+ return ERROR_BLOCK_NR;
+ }
break;
}
@@ -189,7 +197,10 @@ static block_number_t load_eckd_segments(block_number_t blk, bool ldipl,
* I.e. the next ptr must point to the unused memory area
*/
memset(_bprs, FREE_SPACE_FILLER, sizeof(_bprs));
- read_block(block_nr, bprs, "BPRS continuation read failed");
+ if (virtio_read(block_nr, bprs)) {
+ puts("BPRS continuation read failed");
+ return ERROR_BLOCK_NR;
+ }
more_data = true;
break;
}
@@ -198,7 +209,10 @@ static block_number_t load_eckd_segments(block_number_t blk, bool ldipl,
* to memory (address).
*/
rc = virtio_read_many(block_nr, (void *)(*address), count + 1);
- IPL_assert(rc == 0, "code chunk read failed");
+ if (rc != 0) {
+ puts("Code chunk read failed");
+ return ERROR_BLOCK_NR;
+ }
*address += (count + 1) * virtio_get_block_size();
}
@@ -232,7 +246,10 @@ static int eckd_get_boot_menu_index(block_number_t s1b_block_nr)
/* Get Stage1b data */
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
- read_block(s1b_block_nr, s1b, "Cannot read stage1b boot loader");
+ if (virtio_read(s1b_block_nr, s1b)) {
+ puts("Cannot read stage1b boot loader");
+ return -EIO;
+ }
memset(_s2, FREE_SPACE_FILLER, sizeof(_s2));
@@ -244,7 +261,10 @@ static int eckd_get_boot_menu_index(block_number_t s1b_block_nr)
break;
}
- read_block(cur_block_nr, s2_cur_blk, "Cannot read stage2 boot loader");
+ if (virtio_read(cur_block_nr, s2_cur_blk)) {
+ puts("Cannot read stage2 boot loader");
+ return -EIO;
+ }
if (find_zipl_boot_menu_banner(&banner_offset)) {
/*
@@ -252,8 +272,10 @@ static int eckd_get_boot_menu_index(block_number_t s1b_block_nr)
* possibility of menu data spanning multiple blocks.
*/
if (prev_block_nr) {
- read_block(prev_block_nr, s2_prev_blk,
- "Cannot read stage2 boot loader");
+ if (virtio_read(prev_block_nr, s2_prev_blk)) {
+ puts("Cannot read stage2 boot loader");
+ return -EIO;
+ }
}
if (i + 1 < STAGE2_BLK_CNT_MAX) {
@@ -261,8 +283,10 @@ static int eckd_get_boot_menu_index(block_number_t s1b_block_nr)
}
if (next_block_nr && !is_null_block_number(next_block_nr)) {
- read_block(next_block_nr, s2_next_blk,
- "Cannot read stage2 boot loader");
+ if (virtio_read(next_block_nr, s2_next_blk)) {
+ puts("Cannot read stage2 boot loader");
+ return -EIO;
+ }
}
return menu_get_zipl_boot_index(s2_cur_blk + banner_offset);
@@ -275,7 +299,7 @@ static int eckd_get_boot_menu_index(block_number_t s1b_block_nr)
return 0;
}
-static void run_eckd_boot_script(block_number_t bmt_block_nr,
+static int run_eckd_boot_script(block_number_t bmt_block_nr,
block_number_t s1b_block_nr)
{
int i;
@@ -292,17 +316,28 @@ static void run_eckd_boot_script(block_number_t bmt_block_nr,
}
debug_print_int("loadparm", loadparm);
- IPL_assert(loadparm < MAX_BOOT_ENTRIES, "loadparm value greater than"
- " maximum number of boot entries allowed");
+ if (loadparm >= MAX_BOOT_ENTRIES) {
+ puts("loadparm value greater than max number of boot entries allowed");
+ return -EINVAL;
+ }
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
- read_block(bmt_block_nr, sec, "Cannot read Boot Map Table");
+ if (virtio_read(bmt_block_nr, sec)) {
+ puts("Cannot read Boot Map Table");
+ return -EIO;
+ }
block_nr = gen_eckd_block_num(&bmt->entry[loadparm].xeckd, ldipl);
- IPL_assert(block_nr != -1, "Cannot find Boot Map Table Entry");
+ if (block_nr == NULL_BLOCK_NR) {
+ puts("Cannot find Boot Map Table Entry");
+ return -EIO;
+ }
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
- read_block(block_nr, sec, "Cannot read Boot Map Script");
+ if (virtio_read(block_nr, sec)) {
+ puts("Cannot read Boot Map Script");
+ return -EIO;
+ }
for (i = 0; bms->entry[i].type == BOOT_SCRIPT_LOAD ||
bms->entry[i].type == BOOT_SCRIPT_SIGNATURE; i++) {
@@ -317,21 +352,27 @@ static void run_eckd_boot_script(block_number_t bmt_block_nr,
do {
block_nr = load_eckd_segments(block_nr, ldipl, &address);
- } while (block_nr != -1);
+ if (block_nr == ERROR_BLOCK_NR) {
+ return ldipl ? 0 : -EIO;
+ }
+ } while (block_nr != NULL_BLOCK_NR);
}
if (ldipl && bms->entry[i].type != BOOT_SCRIPT_EXEC) {
/* Abort LD-IPL and retry as CCW-IPL */
- return;
+ return 0;
}
- IPL_assert(bms->entry[i].type == BOOT_SCRIPT_EXEC,
- "Unknown script entry type");
+ if (bms->entry[i].type != BOOT_SCRIPT_EXEC) {
+ puts("Unknown script entry type");
+ return -EINVAL;
+ }
write_reset_psw(bms->entry[i].address.load_address); /* no return */
jump_to_IPL_code(0); /* no return */
+ return -1;
}
-static void ipl_eckd_cdl(void)
+static int ipl_eckd_cdl(void)
{
XEckdMbr *mbr;
EckdCdlIpl2 *ipl2 = (void *)sec;
@@ -342,20 +383,23 @@ static void ipl_eckd_cdl(void)
puts("CDL");
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
- read_block(1, ipl2, "Cannot read IPL2 record at block 1");
+ if (virtio_read(1, ipl2)) {
+ puts("Cannot read IPL2 record at block 1");
+ return -EIO;
+ }
mbr = &ipl2->mbr;
if (!magic_match(mbr, ZIPL_MAGIC)) {
puts("No zIPL section in IPL2 record.");
- return;
+ return 0;
}
if (!block_size_ok(mbr->blockptr.xeckd.bptr.size)) {
puts("Bad block size in zIPL section of IPL2 record.");
- return;
+ return 0;
}
if (mbr->dev_type != DEV_TYPE_ECKD) {
puts("Non-ECKD device type in zIPL section of IPL2 record.");
- return;
+ return 0;
}
/* save pointer to Boot Map Table */
@@ -365,19 +409,21 @@ static void ipl_eckd_cdl(void)
s1b_block_nr = eckd_block_num(&ipl2->stage1.seek[0].chs);
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
- read_block(2, vlbl, "Cannot read Volume Label at block 2");
+ if (virtio_read(2, vlbl)) {
+ puts("Cannot read Volume Label at block 2");
+ return -EIO;
+ }
if (!magic_match(vlbl->key, VOL1_MAGIC)) {
puts("Invalid magic of volume label block.");
- return;
+ return 0;
}
if (!magic_match(vlbl->f.key, VOL1_MAGIC)) {
puts("Invalid magic of volser block.");
- return;
+ return 0;
}
print_volser(vlbl->f.volser);
- run_eckd_boot_script(bmt_block_nr, s1b_block_nr);
- /* no return */
+ return run_eckd_boot_script(bmt_block_nr, s1b_block_nr);
}
static void print_eckd_ldl_msg(ECKD_IPL_mode_t mode)
@@ -403,7 +449,7 @@ static void print_eckd_ldl_msg(ECKD_IPL_mode_t mode)
print_volser(vlbl->volser);
}
-static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
+static int ipl_eckd_ldl(ECKD_IPL_mode_t mode)
{
block_number_t bmt_block_nr, s1b_block_nr;
EckdLdlIpl1 *ipl1 = (void *)sec;
@@ -415,10 +461,13 @@ static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
/* DO NOT read BootMap pointer (only one, xECKD) at block #2 */
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
- read_block(0, sec, "Cannot read block 0 to grab boot info.");
+ if (virtio_read(0, sec)) {
+ puts("Cannot read block 0 to grab boot info.");
+ return -EIO;
+ }
if (mode == ECKD_LDL_UNLABELED) {
if (!magic_match(ipl1->bip.magic, ZIPL_MAGIC)) {
- return; /* not applicable layout */
+ return 0; /* not applicable layout */
}
puts("unlabeled LDL.");
}
@@ -430,8 +479,7 @@ static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
/* save pointer to Stage1b Data */
s1b_block_nr = eckd_block_num(&ipl1->stage1.seek[0].chs);
- run_eckd_boot_script(bmt_block_nr, s1b_block_nr);
- /* no return */
+ return run_eckd_boot_script(bmt_block_nr, s1b_block_nr);
}
static block_number_t eckd_find_bmt(ExtEckdBlockPtr *ptr)
@@ -441,7 +489,10 @@ static block_number_t eckd_find_bmt(ExtEckdBlockPtr *ptr)
BootRecord *br;
blockno = gen_eckd_block_num(ptr, 0);
- read_block(blockno, tmp_sec, "Cannot read boot record");
+ if (virtio_read(blockno, tmp_sec)) {
+ puts("Cannot read boot record");
+ return ERROR_BLOCK_NR;
+ }
br = (BootRecord *)tmp_sec;
if (!magic_match(br->magic, ZIPL_MAGIC)) {
/* If the boot record is invalid, return and try CCW-IPL instead */
@@ -470,7 +521,7 @@ static void print_eckd_msg(void)
printf("%s", msg);
}
-static void ipl_eckd(void)
+static int ipl_eckd(void)
{
IplVolumeLabel *vlbl = (void *)sec;
LDL_VTOC *vtoc = (void *)sec;
@@ -480,7 +531,10 @@ static void ipl_eckd(void)
/* Block 2 can contain either the CDL VOL1 label or the LDL VTOC */
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
- read_block(2, vlbl, "Cannot read block 2");
+ if (virtio_read(2, vlbl)) {
+ puts("Cannot read block 2");
+ return -EIO;
+ }
/*
* First check for a list-directed-format pointer which would
@@ -488,36 +542,53 @@ static void ipl_eckd(void)
*/
if (eckd_valid_address((ExtEckdBlockPtr *)&vlbl->f.br, 0)) {
ldipl_bmt = eckd_find_bmt((ExtEckdBlockPtr *)&vlbl->f.br);
- if (ldipl_bmt) {
+ switch (ldipl_bmt) {
+ case ERROR_BLOCK_NR:
+ return -EIO;
+ case NULL_BLOCK_NR:
+ break; /* Invalid BMT but the device may still boot with CCW-IPL */
+ default:
puts("List-Directed");
- /* LD-IPL does not use the S1B bock, just make it NULL */
- run_eckd_boot_script(ldipl_bmt, NULL_BLOCK_NR);
- /* Only return in error, retry as CCW-IPL */
+ /*
+ * LD-IPL does not use the S1B bock, just make it NULL_BLOCK_NR.
+ * In some failure cases retry IPL before aborting.
+ */
+ if (run_eckd_boot_script(ldipl_bmt, NULL_BLOCK_NR)) {
+ return -EIO;
+ }
+ /* Non-fatal error, retry as CCW-IPL */
printf("Retrying IPL ");
print_eckd_msg();
}
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
- read_block(2, vtoc, "Cannot read block 2");
+ if (virtio_read(2, vtoc)) {
+ puts("Cannot read block 2");
+ return -EIO;
+ }
}
/* Not list-directed */
if (magic_match(vtoc->magic, VOL1_MAGIC)) {
- ipl_eckd_cdl(); /* may return in error */
+ if (ipl_eckd_cdl()) {
+ return -1;
+ }
}
if (magic_match(vtoc->magic, CMS1_MAGIC)) {
- ipl_eckd_ldl(ECKD_CMS); /* no return */
+ return ipl_eckd_ldl(ECKD_CMS);
}
if (magic_match(vtoc->magic, LNX1_MAGIC)) {
- ipl_eckd_ldl(ECKD_LDL); /* no return */
+ return ipl_eckd_ldl(ECKD_LDL);
}
- ipl_eckd_ldl(ECKD_LDL_UNLABELED); /* it still may return */
+ if (ipl_eckd_ldl(ECKD_LDL_UNLABELED)) {
+ return -1;
+ }
/*
* Ok, it is not a LDL by any means.
* It still might be a CDL with zero record keys for IPL1 and IPL2
*/
- ipl_eckd_cdl();
+ return ipl_eckd_cdl();
}
/***********************************************************************
@@ -910,7 +981,7 @@ static bool has_iso_signature(void)
* Bus specific IPL sequences
*/
-static void zipl_load_vblk(void)
+static int zipl_load_vblk(void)
{
int blksize = virtio_get_block_size();
@@ -919,7 +990,7 @@ static void zipl_load_vblk(void)
virtio_assume_iso9660();
}
if (ipl_iso_el_torito()) {
- return;
+ return 0;
}
}
@@ -927,21 +998,21 @@ static void zipl_load_vblk(void)
puts("Using guessed DASD geometry.");
virtio_assume_eckd();
}
- ipl_eckd();
+ return ipl_eckd();
}
-static void zipl_load_vscsi(void)
+static int zipl_load_vscsi(void)
{
if (virtio_get_block_size() == VIRTIO_ISO_BLOCK_SIZE) {
/* Is it an ISO image in non-CD drive? */
if (ipl_iso_el_torito()) {
- return;
+ return 0;
}
}
puts("Using guessed DASD geometry.");
virtio_assume_eckd();
- ipl_eckd();
+ return ipl_eckd();
}
/***********************************************************************
--
2.47.0© 2016 - 2024 Red Hat, Inc.