[PULL 42/54] hw/intc: Remove omap2-intc device

There is a newer version of this series
[PULL 42/54] hw/intc: Remove omap2-intc device
Posted by Peter Maydell 1 month, 3 weeks ago
Remove the OMAP2 specific code from omap_intc.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-41-peter.maydell@linaro.org
---
 hw/intc/omap_intc.c | 276 --------------------------------------------
 1 file changed, 276 deletions(-)

diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c
index 02acece8cf1..a48e6fcd6d3 100644
--- a/hw/intc/omap_intc.c
+++ b/hw/intc/omap_intc.c
@@ -50,8 +50,6 @@ struct OMAPIntcState {
     int level_only;
     uint32_t size;
 
-    uint8_t revision;
-
     /* state */
     uint32_t new_agr[2];
     int sir_intr[2];
@@ -133,26 +131,6 @@ static void omap_set_intr(void *opaque, int irq, int req)
     }
 }
 
-/* Simplified version with no edge detection */
-static void omap_set_intr_noedge(void *opaque, int irq, int req)
-{
-    OMAPIntcState *ih = opaque;
-    uint32_t rise;
-
-    struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5];
-    int n = irq & 31;
-
-    if (req) {
-        rise = ~bank->inputs & (1 << n);
-        if (rise) {
-            bank->irqs |= bank->inputs |= rise;
-            omap_inth_update(ih, 0);
-            omap_inth_update(ih, 1);
-        }
-    } else
-        bank->irqs = (bank->inputs &= ~(1 << n)) | bank->swi;
-}
-
 static uint64_t omap_inth_read(void *opaque, hwaddr addr,
                                unsigned size)
 {
@@ -420,259 +398,6 @@ static const TypeInfo omap_intc_info = {
     .class_init    = omap_intc_class_init,
 };
 
-static uint64_t omap2_inth_read(void *opaque, hwaddr addr,
-                                unsigned size)
-{
-    OMAPIntcState *s = opaque;
-    int offset = addr;
-    int bank_no, line_no;
-    struct omap_intr_handler_bank_s *bank = NULL;
-
-    if ((offset & 0xf80) == 0x80) {
-        bank_no = (offset & 0x60) >> 5;
-        if (bank_no < s->nbanks) {
-            offset &= ~0x60;
-            bank = &s->bank[bank_no];
-        } else {
-            OMAP_BAD_REG(addr);
-            return 0;
-        }
-    }
-
-    switch (offset) {
-    case 0x00:	/* INTC_REVISION */
-        return s->revision;
-
-    case 0x10:	/* INTC_SYSCONFIG */
-        return (s->autoidle >> 2) & 1;
-
-    case 0x14:	/* INTC_SYSSTATUS */
-        return 1;						/* RESETDONE */
-
-    case 0x40:	/* INTC_SIR_IRQ */
-        return s->sir_intr[0];
-
-    case 0x44:	/* INTC_SIR_FIQ */
-        return s->sir_intr[1];
-
-    case 0x48:	/* INTC_CONTROL */
-        return (!s->mask) << 2;					/* GLOBALMASK */
-
-    case 0x4c:	/* INTC_PROTECTION */
-        return 0;
-
-    case 0x50:	/* INTC_IDLE */
-        return s->autoidle & 3;
-
-    /* Per-bank registers */
-    case 0x80:	/* INTC_ITR */
-        return bank->inputs;
-
-    case 0x84:	/* INTC_MIR */
-        return bank->mask;
-
-    case 0x88:	/* INTC_MIR_CLEAR */
-    case 0x8c:	/* INTC_MIR_SET */
-        return 0;
-
-    case 0x90:	/* INTC_ISR_SET */
-        return bank->swi;
-
-    case 0x94:	/* INTC_ISR_CLEAR */
-        return 0;
-
-    case 0x98:	/* INTC_PENDING_IRQ */
-        return bank->irqs & ~bank->mask & ~bank->fiq;
-
-    case 0x9c:	/* INTC_PENDING_FIQ */
-        return bank->irqs & ~bank->mask & bank->fiq;
-
-    /* Per-line registers */
-    case 0x100 ... 0x300:	/* INTC_ILR */
-        bank_no = (offset - 0x100) >> 7;
-        if (bank_no > s->nbanks)
-            break;
-        bank = &s->bank[bank_no];
-        line_no = (offset & 0x7f) >> 2;
-        return (bank->priority[line_no] << 2) |
-                ((bank->fiq >> line_no) & 1);
-    }
-    OMAP_BAD_REG(addr);
-    return 0;
-}
-
-static void omap2_inth_write(void *opaque, hwaddr addr,
-                             uint64_t value, unsigned size)
-{
-    OMAPIntcState *s = opaque;
-    int offset = addr;
-    int bank_no, line_no;
-    struct omap_intr_handler_bank_s *bank = NULL;
-
-    if ((offset & 0xf80) == 0x80) {
-        bank_no = (offset & 0x60) >> 5;
-        if (bank_no < s->nbanks) {
-            offset &= ~0x60;
-            bank = &s->bank[bank_no];
-        } else {
-            OMAP_BAD_REG(addr);
-            return;
-        }
-    }
-
-    switch (offset) {
-    case 0x10:	/* INTC_SYSCONFIG */
-        s->autoidle &= 4;
-        s->autoidle |= (value & 1) << 2;
-        if (value & 2) {                                        /* SOFTRESET */
-            omap_inth_reset(DEVICE(s));
-        }
-        return;
-
-    case 0x48:	/* INTC_CONTROL */
-        s->mask = (value & 4) ? 0 : ~0;				/* GLOBALMASK */
-        if (value & 2) {					/* NEWFIQAGR */
-            qemu_set_irq(s->parent_intr[1], 0);
-            s->new_agr[1] = ~0;
-            omap_inth_update(s, 1);
-        }
-        if (value & 1) {					/* NEWIRQAGR */
-            qemu_set_irq(s->parent_intr[0], 0);
-            s->new_agr[0] = ~0;
-            omap_inth_update(s, 0);
-        }
-        return;
-
-    case 0x4c:	/* INTC_PROTECTION */
-        /* TODO: Make a bitmap (or sizeof(char)map) of access privileges
-         * for every register, see Chapter 3 and 4 for privileged mode.  */
-        if (value & 1)
-            fprintf(stderr, "%s: protection mode enable attempt\n",
-                            __func__);
-        return;
-
-    case 0x50:	/* INTC_IDLE */
-        s->autoidle &= ~3;
-        s->autoidle |= value & 3;
-        return;
-
-    /* Per-bank registers */
-    case 0x84:	/* INTC_MIR */
-        bank->mask = value;
-        omap_inth_update(s, 0);
-        omap_inth_update(s, 1);
-        return;
-
-    case 0x88:	/* INTC_MIR_CLEAR */
-        bank->mask &= ~value;
-        omap_inth_update(s, 0);
-        omap_inth_update(s, 1);
-        return;
-
-    case 0x8c:	/* INTC_MIR_SET */
-        bank->mask |= value;
-        return;
-
-    case 0x90:	/* INTC_ISR_SET */
-        bank->irqs |= bank->swi |= value;
-        omap_inth_update(s, 0);
-        omap_inth_update(s, 1);
-        return;
-
-    case 0x94:	/* INTC_ISR_CLEAR */
-        bank->swi &= ~value;
-        bank->irqs = bank->swi & bank->inputs;
-        return;
-
-    /* Per-line registers */
-    case 0x100 ... 0x300:	/* INTC_ILR */
-        bank_no = (offset - 0x100) >> 7;
-        if (bank_no > s->nbanks)
-            break;
-        bank = &s->bank[bank_no];
-        line_no = (offset & 0x7f) >> 2;
-        bank->priority[line_no] = (value >> 2) & 0x3f;
-        bank->fiq &= ~(1 << line_no);
-        bank->fiq |= (value & 1) << line_no;
-        return;
-
-    case 0x00:	/* INTC_REVISION */
-    case 0x14:	/* INTC_SYSSTATUS */
-    case 0x40:	/* INTC_SIR_IRQ */
-    case 0x44:	/* INTC_SIR_FIQ */
-    case 0x80:	/* INTC_ITR */
-    case 0x98:	/* INTC_PENDING_IRQ */
-    case 0x9c:	/* INTC_PENDING_FIQ */
-        OMAP_RO_REG(addr);
-        return;
-    }
-    OMAP_BAD_REG(addr);
-}
-
-static const MemoryRegionOps omap2_inth_mem_ops = {
-    .read = omap2_inth_read,
-    .write = omap2_inth_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-    .valid = {
-        .min_access_size = 4,
-        .max_access_size = 4,
-    },
-};
-
-static void omap2_intc_init(Object *obj)
-{
-    DeviceState *dev = DEVICE(obj);
-    OMAPIntcState *s = OMAP_INTC(obj);
-    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
-
-    s->level_only = 1;
-    s->nbanks = 3;
-    sysbus_init_irq(sbd, &s->parent_intr[0]);
-    sysbus_init_irq(sbd, &s->parent_intr[1]);
-    qdev_init_gpio_in(dev, omap_set_intr_noedge, s->nbanks * 32);
-    memory_region_init_io(&s->mmio, obj, &omap2_inth_mem_ops, s,
-                          "omap2-intc", 0x1000);
-    sysbus_init_mmio(sbd, &s->mmio);
-}
-
-static void omap2_intc_realize(DeviceState *dev, Error **errp)
-{
-    OMAPIntcState *s = OMAP_INTC(dev);
-
-    if (!s->iclk) {
-        error_setg(errp, "omap2-intc: iclk not connected");
-        return;
-    }
-    if (!s->fclk) {
-        error_setg(errp, "omap2-intc: fclk not connected");
-        return;
-    }
-}
-
-static Property omap2_intc_properties[] = {
-    DEFINE_PROP_UINT8("revision", OMAPIntcState,
-    revision, 0x21),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void omap2_intc_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-
-    device_class_set_legacy_reset(dc, omap_inth_reset);
-    device_class_set_props(dc, omap2_intc_properties);
-    /* Reason: pointer property "iclk", "fclk" */
-    dc->user_creatable = false;
-    dc->realize = omap2_intc_realize;
-}
-
-static const TypeInfo omap2_intc_info = {
-    .name          = "omap2-intc",
-    .parent        = TYPE_OMAP_INTC,
-    .instance_init = omap2_intc_init,
-    .class_init    = omap2_intc_class_init,
-};
-
 static const TypeInfo omap_intc_type_info = {
     .name          = TYPE_OMAP_INTC,
     .parent        = TYPE_SYS_BUS_DEVICE,
@@ -684,7 +409,6 @@ static void omap_intc_register_types(void)
 {
     type_register_static(&omap_intc_type_info);
     type_register_static(&omap_intc_info);
-    type_register_static(&omap2_intc_info);
 }
 
 type_init(omap_intc_register_types)
-- 
2.34.1