[PULL 20/27] hw/net/can/xlnx-versal-canfd: Handle flags correctly

There is a newer version of this series
[PULL 20/27] hw/net/can/xlnx-versal-canfd: Handle flags correctly
Posted by Peter Maydell 2 months, 1 week ago
From: Doug Brown <doug@schmorgal.com>

Add support for QEMU_CAN_FRMF_ESI and QEMU_CAN_FRMF_BRS flags, and
ensure frame->flags is always initialized to 0.

Note that the Xilinx IP core doesn't allow manually setting the ESI bit
during transmits, so it's only implemented for the receive case.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-5-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/can/xlnx-versal-canfd.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/hw/net/can/xlnx-versal-canfd.c b/hw/net/can/xlnx-versal-canfd.c
index 9e825746736..9fba5b9dfc5 100644
--- a/hw/net/can/xlnx-versal-canfd.c
+++ b/hw/net/can/xlnx-versal-canfd.c
@@ -872,6 +872,8 @@ static void regs2frame(XlnxVersalCANFDState *s, qemu_can_frame *frame,
     uint32_t id_reg_val = 0;
     bool is_rtr = false;
 
+    frame->flags = 0;
+
     /* Check that reg_num should be within TX register space. */
     assert(reg_num <= R_TB_ID_REGISTER + (NUM_REGS_PER_MSG_SPACE *
                                           s->cfg.tx_fifo));
@@ -913,7 +915,7 @@ static void regs2frame(XlnxVersalCANFDState *s, qemu_can_frame *frame,
          *  15                         49 - 64
          */
 
-        frame->flags = QEMU_CAN_FRMF_TYPE_FD;
+        frame->flags |= QEMU_CAN_FRMF_TYPE_FD;
 
         if (dlc_value < 8) {
             frame->can_dlc = dlc_value;
@@ -921,6 +923,10 @@ static void regs2frame(XlnxVersalCANFDState *s, qemu_can_frame *frame,
             assert((dlc_value - 8) < ARRAY_SIZE(canfd_dlc_array));
             frame->can_dlc = canfd_dlc_array[dlc_value - 8];
         }
+
+        if (FIELD_EX32(dlc_reg_val, TB0_DLC_REGISTER, BRS)) {
+            frame->flags |= QEMU_CAN_FRMF_BRS;
+        }
     } else {
         /*
          * FD Format bit not set that means it is a CAN Frame.
@@ -1058,6 +1064,13 @@ static void store_rx_sequential(XlnxVersalCANFDState *s,
                     dlc_reg_val = FIELD_DP32(0, RB_DLC_REGISTER, DLC, 8 + i);
                 }
             }
+
+            if (frame->flags & QEMU_CAN_FRMF_BRS) {
+                dlc_reg_val |= FIELD_DP32(0, RB_DLC_REGISTER, BRS, 1);
+            }
+            if (frame->flags & QEMU_CAN_FRMF_ESI) {
+                dlc_reg_val |= FIELD_DP32(0, RB_DLC_REGISTER, ESI, 1);
+            }
         } else {
             is_canfd_frame = false;
 
-- 
2.34.1