Add support for NXP's flexcomm i2c. It does not support slave mode or
DMA.
Signed-off-by: Octavian Purdila <tavip@google.com>
---
hw/arm/svd/meson.build | 4 +
hw/i2c/flexcomm_i2c.c | 224 ++++++++++++++++++++++++++++++++++
hw/i2c/meson.build | 1 +
hw/i2c/trace-events | 10 ++
hw/misc/flexcomm.c | 6 +
include/hw/i2c/flexcomm_i2c.h | 27 ++++
include/hw/misc/flexcomm.h | 4 +
tests/unit/meson.build | 4 +
8 files changed, 280 insertions(+)
create mode 100644 hw/i2c/flexcomm_i2c.c
create mode 100644 include/hw/i2c/flexcomm_i2c.h
diff --git a/hw/arm/svd/meson.build b/hw/arm/svd/meson.build
index ed0f69f437..fa0d3da829 100644
--- a/hw/arm/svd/meson.build
+++ b/hw/arm/svd/meson.build
@@ -6,3 +6,7 @@ genh += custom_target('flexcomm_usart.h',
output: 'flexcomm_usart.h',
input: 'MIMXRT595S_cm33.xml',
command: [ svd_gen_header, '-i', '@INPUT@', '-o', '@OUTPUT@', '-p', 'USART0', '-t', 'FLEXCOMM_USART'])
+genh += custom_target('flexcomm_i2c_regs.h',
+ output: 'flexcomm_i2c.h',
+ input: 'MIMXRT595S_cm33.xml',
+ command: [ svd_gen_header, '-i', '@INPUT@', '-o', '@OUTPUT@', '-p', 'I2C0', '-t', 'FLEXCOMM_I2C'])
diff --git a/hw/i2c/flexcomm_i2c.c b/hw/i2c/flexcomm_i2c.c
new file mode 100644
index 0000000000..7e74f858ce
--- /dev/null
+++ b/hw/i2c/flexcomm_i2c.c
@@ -0,0 +1,224 @@
+/*
+ * QEMU model for NXP's FLEXCOMM I2C
+ *
+ * Copyright (c) 2024 Google LLC
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/cutils.h"
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "exec/address-spaces.h"
+#include "qapi/error.h"
+#include "trace.h"
+#include "hw/regs.h"
+#include "hw/i2c/flexcomm_i2c.h"
+
+#define reg(field) offsetof(FLEXCOMM_I2C_Type, field)
+#define regi(x) (reg(x) / sizeof(uint32_t))
+#define REG_NO (sizeof(FLEXCOMM_I2C_Type) / sizeof(uint32_t))
+
+static FLEXCOMM_I2C_REGISTER_NAMES_ARRAY(reg_names);
+
+static void flexcomm_i2c_reset(FlexcommState *s)
+{
+ flexcomm_i2c_reset_registers(&s->regs.i2c);
+}
+
+static void flexcomm_i2c_irq_update(FlexcommState *s)
+{
+ bool enabled = s->regs.i2c.CFG_b.MSTEN;
+ bool irq, per_irqs;
+
+ s->regs.i2c.INTSTAT = s->regs.i2c.STAT & s->regs.i2c.INTENSET;
+ per_irqs = s->regs.i2c.INTSTAT != 0;
+
+ irq = enabled && per_irqs;
+
+ trace_flexcomm_i2c_irq(DEVICE(s)->id, irq, per_irqs, enabled);
+ flexcomm_irq(s, irq);
+}
+
+static MemTxResult flexcomm_i2c_reg_read(void *opaque, FlexcommState *s,
+ int f, hwaddr addr, uint64_t *data,
+ unsigned size)
+{
+ MemTxResult ret = MEMTX_OK;
+
+ if (!reg32_aligned_access(addr, size)) {
+ ret = MEMTX_ERROR;
+ goto out;
+ }
+
+ *data = reg32_read(&s->regs, addr);
+
+ flexcomm_i2c_irq_update(s);
+
+out:
+ trace_flexcomm_i2c_reg_read(DEVICE(s)->id, reg_names[addr], addr, *data);
+ return ret;
+}
+
+static MemTxResult flexcomm_i2c_reg_write(void *opaque, FlexcommState *s,
+ int f, hwaddr addr, uint64_t value,
+ unsigned size)
+{
+ MemTxResult ret = MEMTX_OK;
+ static uint32_t mask[REG_NO] = {
+ [regi(CFG)] = BITS(5, 0),
+ [regi(STAT)] = BITS(25, 24) | BIT(19) | BIT(17) | BIT(15) | BIT(6),
+ [regi(INTENSET)] = BITS(25, 24) | BIT(19) | BITS(17, 15) | BIT(11) |
+ BIT(8) | BIT(6) | BIT(4) | BIT(0),
+ [regi(INTENCLR)] = BITS(25, 24) | BIT(19) | BITS(17, 15) | BIT(11) |
+ BIT(8) | BIT(6) | BIT(4) | BIT(0),
+ [regi(TIMEOUT)] = BITS(15, 0),
+ [regi(CLKDIV)] = BITS(15, 0),
+ [regi(MSTCTL)] = BITS(3, 0),
+ [regi(MSTTIME)] = BITS(6, 4) | BITS(2, 0),
+ [regi(MSTDAT)] = BITS(7, 0),
+ [regi(SLVCTL)] = BITS(9, 8) | BIT(3) | BITS(1, 0),
+ [regi(SLVDAT)] = BITS(7, 0),
+ [regi(SLVADR0)] = BIT(15) | BITS(7, 0),
+ [regi(SLVADR1)] = BIT(15) | BITS(7, 0),
+ [regi(SLVADR2)] = BIT(15) | BITS(7, 0),
+ [regi(SLVADR3)] = BIT(15) | BITS(7, 0),
+ [regi(SLVQUAL0)] = BITS(7, 0),
+ };
+
+ if (!reg32_aligned_access(addr, size)) {
+ ret = MEMTX_ERROR;
+ goto out;
+ }
+
+ switch (addr) {
+ case reg(CFG):
+ {
+ reg32_write(&s->regs, addr, value, mask);
+ if (s->regs.i2c.CFG_b.SLVEN) {
+ qemu_log_mask(LOG_GUEST_ERROR, "I2C slave not supported");
+ }
+ if (s->regs.i2c.CFG_b.MONEN) {
+ qemu_log_mask(LOG_GUEST_ERROR, "I2C monitoring not supported");
+ }
+ break;
+ }
+ case reg(INTENCLR):
+ {
+ s->regs.i2c.INTENSET &= ~(value & mask[addr / 4]);
+ break;
+ }
+ case reg(TIMEOUT):
+ {
+ reg32_write(&s->regs, addr, value, mask);
+ /* The bottom 4 bits are hard-wired to 0xF */
+ s->regs.i2c.TIMEOUT_b.TOMIN = 0xf;
+ break;
+ }
+ case reg(MSTCTL):
+ {
+ reg32_write(&s->regs, addr, value, mask);
+ if (s->regs.i2c.MSTCTL_b.MSTSTART) {
+ uint8_t i2c_addr = s->regs.i2c.MSTDAT_b.DATA;
+ bool recv = i2c_addr & 1;
+
+ trace_flexcomm_i2c_start(DEVICE(s)->id, i2c_addr, recv);
+ if (i2c_start_transfer(s->i2c, i2c_addr, recv)) {
+ s->regs.i2c.STAT_b.MSTSTATE = MSTSTATE_NAKADR;
+ trace_flexcomm_i2c_nak(DEVICE(s)->id);
+ } else {
+ if (recv) {
+ uint8_t data = i2c_recv(s->i2c);
+
+ s->regs.i2c.MSTDAT_b.DATA = data;
+ trace_flexcomm_i2c_rx(DEVICE(s)->id, data);
+ s->regs.i2c.STAT_b.MSTSTATE = MSTSTATE_RXRDY;
+ } else {
+ s->regs.i2c.STAT_b.MSTSTATE = MSTSTATE_TXRDY;
+ }
+ }
+ }
+ if (s->regs.i2c.MSTCTL_b.MSTSTOP) {
+ s->regs.i2c.STAT_b.MSTSTATE = MSTSTATE_IDLE;
+ i2c_end_transfer(s->i2c);
+ }
+ if (s->regs.i2c.MSTCTL_b.MSTCONTINUE) {
+ if (s->regs.i2c.STAT_b.MSTSTATE == MSTSTATE_TXRDY) {
+ uint8_t data = s->regs.i2c.MSTDAT_b.DATA;
+
+ trace_flexcomm_i2c_tx(DEVICE(s)->id, data);
+ if (i2c_send(s->i2c, data)) {
+ s->regs.i2c.STAT_b.MSTSTATE = MSTSTATE_NAKDAT;
+ }
+ } else if (s->regs.i2c.STAT_b.MSTSTATE == MSTSTATE_RXRDY) {
+ uint8_t data = i2c_recv(s->i2c);
+
+ s->regs.i2c.MSTDAT_b.DATA = data;
+ trace_flexcomm_i2c_rx(DEVICE(s)->id, data);
+ }
+ }
+ break;
+ }
+ case reg(STAT):
+ {
+ /* write 1 to clear bits */
+ s->regs.i2c.STAT &= ~(value & mask[addr / 4]);
+ break;
+ }
+ case reg(SLVCTL):
+ case reg(SLVDAT):
+ case reg(SLVADR0):
+ case reg(SLVADR1):
+ case reg(SLVADR2):
+ case reg(SLVADR3):
+ case reg(SLVQUAL0):
+ {
+ qemu_log_mask(LOG_GUEST_ERROR, "I2C slave not supported\n");
+ break;
+ }
+ default:
+ reg32_write(&s->regs, addr, value, mask);
+ break;
+ }
+
+ flexcomm_i2c_irq_update(s);
+
+out:
+ trace_flexcomm_i2c_reg_write(DEVICE(s)->id, reg_names[addr], addr, value);
+ return ret;
+}
+
+static void flexcomm_i2c_select(void *opaque, FlexcommState *s, int f,
+ bool set)
+{
+ if (set) {
+ flexcomm_i2c_reset(s);
+ }
+}
+
+static const FlexcommFunctionOps flexcomm_i2c_ops = {
+ .select = flexcomm_i2c_select,
+ .reg_read = flexcomm_i2c_reg_read,
+ .reg_write = flexcomm_i2c_reg_write,
+};
+
+void flexcomm_i2c_init(FlexcommState *s)
+{
+ s->i2c = i2c_init_bus(DEVICE(s), "i2c");
+}
+
+void flexcomm_i2c_register(void)
+{
+ Error *err = NULL;
+
+ if (!flexcomm_register_ops(FLEXCOMM_FUNC_I2C, NULL,
+ &flexcomm_i2c_ops, &err)) {
+ error_report_err(err);
+ }
+}
diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build
index c459adcb59..e7d79e6938 100644
--- a/hw/i2c/meson.build
+++ b/hw/i2c/meson.build
@@ -18,4 +18,5 @@ i2c_ss.add(when: 'CONFIG_PPC4XX', if_true: files('ppc4xx_i2c.c'))
i2c_ss.add(when: 'CONFIG_PCA954X', if_true: files('i2c_mux_pca954x.c'))
i2c_ss.add(when: 'CONFIG_PMBUS', if_true: files('pmbus_device.c'))
i2c_ss.add(when: 'CONFIG_BCM2835_I2C', if_true: files('bcm2835_i2c.c'))
+i2c_ss.add(when: 'CONFIG_FLEXCOMM', if_true: files('flexcomm_i2c.c'))
system_ss.add_all(when: 'CONFIG_I2C', if_true: i2c_ss)
diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events
index 6900e06eda..9f0175fab7 100644
--- a/hw/i2c/trace-events
+++ b/hw/i2c/trace-events
@@ -51,3 +51,13 @@ npcm7xx_smbus_recv_fifo(const char *id, uint8_t received, uint8_t expected) "%s
pca954x_write_bytes(uint8_t value) "PCA954X write data: 0x%02x"
pca954x_read_data(uint8_t value) "PCA954X read data: 0x%02x"
+
+# flexcomm_i2c.c
+
+flexcomm_i2c_reg_read(const char *id, const char *reg_name, uint32_t addr, uint32_t val) " %s: %s[0x%04x] -> 0x%08x"
+flexcomm_i2c_reg_write(const char *id, const char *reg_name, uint32_t addr, uint32_t val) "%s: %s[0x%04x] <- 0x%08x"
+flexcomm_i2c_start(const char *id, uint8_t addr, uint8_t recv) "%s: 0x%02x %d"
+flexcomm_i2c_rx(const char *id, uint8_t data) "%s: <- 0x%02x"
+flexcomm_i2c_tx(const char *id, uint8_t data) "%s: -> 0x%02x"
+flexcomm_i2c_nak(const char *id) "%s: <- nak"
+flexcomm_i2c_irq(const char *id, bool irq, bool perirqs, bool enabled) "%s: %d %d %d"
diff --git a/hw/misc/flexcomm.c b/hw/misc/flexcomm.c
index 0c94928aa2..2722c1d6a9 100644
--- a/hw/misc/flexcomm.c
+++ b/hw/misc/flexcomm.c
@@ -23,6 +23,7 @@
#include "hw/regs.h"
#include "hw/misc/flexcomm.h"
#include "hw/char/flexcomm_usart.h"
+#include "hw/i2c/flexcomm_i2c.h"
#define reg(field) offsetof(FLEXCOMM_Type, field)
#define regi(x) (reg(x) / sizeof(uint32_t))
@@ -228,6 +229,10 @@ static void flexcomm_realize(DeviceState *dev, Error **errp)
if (has_function(s, FLEXCOMM_FUNC_USART)) {
flexcomm_usart_init(s);
}
+
+ if (has_function(s, FLEXCOMM_FUNC_I2C)) {
+ flexcomm_i2c_init(s);
+ }
}
static void flexcomm_class_init(ObjectClass *klass, void *data)
@@ -239,6 +244,7 @@ static void flexcomm_class_init(ObjectClass *klass, void *data)
dc->realize = flexcomm_realize;
flexcomm_usart_register();
+ flexcomm_i2c_register();
}
static const TypeInfo flexcomm_info = {
diff --git a/include/hw/i2c/flexcomm_i2c.h b/include/hw/i2c/flexcomm_i2c.h
new file mode 100644
index 0000000000..aea01f13bd
--- /dev/null
+++ b/include/hw/i2c/flexcomm_i2c.h
@@ -0,0 +1,27 @@
+/*
+ * QEMU model for NXP's FLEXCOMM I2C
+ *
+ * Copyright (c) 2024 Google LLC
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef HW_CHAR_FLEXCOMM_I2C_H
+#define HW_CHAR_FLEXCOMM_I2C_H
+
+#include "hw/misc/flexcomm.h"
+
+void flexcomm_i2c_init(FlexcommState *s);
+void flexcomm_i2c_register(void);
+
+#define MSTSTATE_IDLE 0
+#define MSTSTATE_RXRDY 1
+#define MSTSTATE_TXRDY 2
+#define MSTSTATE_NAKADR 3
+#define MSTSTATE_NAKDAT 4
+
+
+#endif /* HW_CHAR_FLEXCOMM_I2C_H */
diff --git a/include/hw/misc/flexcomm.h b/include/hw/misc/flexcomm.h
index db76e32c6d..3d042a3511 100644
--- a/include/hw/misc/flexcomm.h
+++ b/include/hw/misc/flexcomm.h
@@ -14,8 +14,10 @@
#include "hw/sysbus.h"
#include "chardev/char-fe.h"
+#include "hw/i2c/i2c.h"
#include "hw/arm/svd/flexcomm.h"
#include "hw/arm/svd/flexcomm_usart.h"
+#include "hw/arm/svd/flexcomm_i2c.h"
#include "qemu/fifo32.h"
#define TYPE_FLEXCOMM "flexcomm"
@@ -46,6 +48,7 @@ typedef struct {
union {
FLEXCOMM_Type flex;
FLEXCOMM_USART_Type usart;
+ FLEXCOMM_I2C_Type i2c;
} regs;
uint32_t functions;
qemu_irq irq;
@@ -53,6 +56,7 @@ typedef struct {
CharBackend chr;
Fifo32 tx_fifo;
Fifo32 rx_fifo;
+ I2CBus *i2c;
} FlexcommState;
typedef struct {
diff --git a/tests/unit/meson.build b/tests/unit/meson.build
index dcfd2e661c..4c22cb3ccc 100644
--- a/tests/unit/meson.build
+++ b/tests/unit/meson.build
@@ -148,6 +148,8 @@ if have_system
meson.project_source_root() / 'tests/unit/sysbus-mock.c',
meson.project_source_root() / 'hw/misc/flexcomm.c',
meson.project_source_root() / 'hw/char/flexcomm_usart.c',
+ meson.project_source_root() / 'hw/i2c/flexcomm_i2c.c',
+ meson.project_source_root() / 'hw/i2c/core.c',
],
'test-flexcomm-usart': [
hwcore, chardev, qom, migration,
@@ -155,6 +157,8 @@ if have_system
meson.project_source_root() / 'tests/unit/sysbus-mock.c',
meson.project_source_root() / 'hw/misc/flexcomm.c',
meson.project_source_root() / 'hw/char/flexcomm_usart.c',
+ meson.project_source_root() / 'hw/i2c/flexcomm_i2c.c',
+ meson.project_source_root() / 'hw/i2c/core.c',
],
}
if config_host_data.get('CONFIG_INOTIFY1')
--
2.46.0.rc2.264.g509ed76dc8-goog