Sweep the entire documentation again. Last done in commit
209e64d9edf (qapi: Refill doc comments to conform to current
conventions).
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240729065220.860163-1-armbru@redhat.com>
[Straightforward conflict with commit 442110bc6f3 resolved]
---
qapi/block-core.json | 71 ++++++++++++++++++++--------------------
qapi/block-export.json | 8 ++---
qapi/block.json | 12 +++----
qapi/char.json | 8 ++---
qapi/control.json | 14 ++++----
qapi/crypto.json | 8 ++---
qapi/cxl.json | 42 ++++++++++++------------
qapi/dump.json | 2 +-
qapi/ebpf.json | 2 +-
qapi/introspect.json | 4 +--
qapi/job.json | 8 ++---
qapi/machine-target.json | 54 +++++++++++++++---------------
qapi/machine.json | 22 ++++++-------
qapi/migration.json | 68 +++++++++++++++++++-------------------
qapi/misc.json | 31 +++++++++---------
qapi/net.json | 27 +++++++++------
qapi/pci.json | 1 -
qapi/qdev.json | 20 +++++------
qapi/qom.json | 38 ++++++++++-----------
qapi/rocker.json | 4 +--
qapi/run-state.json | 12 +++----
qapi/sockets.json | 5 +--
qapi/stats.json | 6 ++--
qapi/transaction.json | 4 +--
qapi/ui.json | 27 +++++++--------
qapi/vfio.json | 8 ++---
qapi/virtio.json | 6 ++--
27 files changed, 262 insertions(+), 250 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index f400b334c8..a1b7cdc58e 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1158,11 +1158,11 @@
#
# @query-nodes: If true, the command will query all the block nodes
# that have a node name, in a list which will include "parent"
-# information, but not "backing". If false or omitted, the
+# information, but not "backing". If false or omitted, the
# behavior is as before - query all the device backends,
-# recursively including their "parent" and "backing". Filter nodes
-# that were created implicitly are skipped over in this mode.
-# (Since 2.3)
+# recursively including their "parent" and "backing". Filter
+# nodes that were created implicitly are skipped over in this
+# mode. (Since 2.3)
#
# Returns: A list of @BlockStats for each virtual block devices.
#
@@ -1286,7 +1286,7 @@
# jobs, cancel the job
#
# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR
-# or BLOCK_JOB_ERROR). The backup, mirror and commit block jobs
+# or BLOCK_JOB_ERROR). The backup, mirror and commit block jobs
# retry the failing request later and may still complete
# successfully. The stream block job continues to stream and will
# complete with an error.
@@ -1574,7 +1574,7 @@
# for unlimited.
#
# @bitmap: The name of a dirty bitmap to use. Must be present if sync
-# is "bitmap" or "incremental". Can be present if sync is "full"
+# is "bitmap" or "incremental". Can be present if sync is "full"
# or "top". Must not be present otherwise.
# (Since 2.4 (drive-backup), 3.1 (blockdev-backup))
#
@@ -1619,9 +1619,9 @@
#
# @unstable: Member @x-perf is experimental.
#
-# .. note:: @on-source-error and @on-target-error only affect background
-# I/O. If an error occurs during a guest write request, the device's
-# rerror/werror actions will be used.
+# .. note:: @on-source-error and @on-target-error only affect
+# background I/O. If an error occurs during a guest write request,
+# the device's rerror/werror actions will be used.
#
# Since: 4.2
##
@@ -1699,7 +1699,7 @@
# Takes a snapshot of a block device.
#
# Take a snapshot, by installing 'node' as the backing image of
-# 'overlay'. Additionally, if 'node' is associated with a block
+# 'overlay'. Additionally, if 'node' is associated with a block
# device, the block device changes to using 'overlay' as its new
# active image.
#
@@ -1738,7 +1738,7 @@
# Change the backing file in the image file metadata. This does not
# cause QEMU to reopen the image file to reparse the backing filename
# (it may, however, perform a reopen to change permissions from r/o ->
-# r/w -> r/o, if needed). The new backing file string is written into
+# r/w -> r/o, if needed). The new backing file string is written into
# the image file metadata, and the QEMU internal strings are updated.
#
# @image-node-name: The name of the block driver state node of the
@@ -1882,8 +1882,8 @@
# Start a point-in-time copy of a block device to a new destination.
# The status of ongoing drive-backup operations can be checked with
# query-block-jobs where the BlockJobInfo.type field has the value
-# 'backup'. The operation can be stopped before it has completed using
-# the block-job-cancel command.
+# 'backup'. The operation can be stopped before it has completed
+# using the block-job-cancel command.
#
# Features:
#
@@ -1913,8 +1913,8 @@
# Start a point-in-time copy of a block device to a new destination.
# The status of ongoing blockdev-backup operations can be checked with
# query-block-jobs where the BlockJobInfo.type field has the value
-# 'backup'. The operation can be stopped before it has completed using
-# the block-job-cancel command.
+# 'backup'. The operation can be stopped before it has completed
+# using the block-job-cancel command.
#
# Errors:
# - If @device is not a valid block device, DeviceNotFound
@@ -2832,7 +2832,7 @@
#
# @speed: the maximum speed, in bytes per second
#
-# @on-error: the action to take on an error (default report). 'stop'
+# @on-error: the action to take on an error (default report). 'stop'
# and 'enospc' can only be used if the block device supports
# io-status (see BlockInfo). (Since 1.3)
#
@@ -3034,8 +3034,8 @@
# semantics.
#
# This command will refuse to operate on any job that has not yet
-# reached its terminal state, JOB_STATUS_CONCLUDED. For jobs that make
-# use of the BLOCK_JOB_READY event, block-job-cancel or
+# reached its terminal state, JOB_STATUS_CONCLUDED. For jobs that
+# make use of the BLOCK_JOB_READY event, block-job-cancel or
# block-job-complete will still need to be used as appropriate.
#
# @id: The job identifier.
@@ -3351,7 +3351,7 @@
# Driver specific block device options for LUKS.
#
# @key-secret: the ID of a QCryptoSecret object providing the
-# decryption key (since 2.6). Mandatory except when doing a
+# decryption key (since 2.6). Mandatory except when doing a
# metadata-only probe of the image.
#
# @header: block device holding a detached LUKS header. (since 9.0)
@@ -4050,6 +4050,7 @@
# @path: path to the vhost-vdpa character device.
#
# Features:
+#
# @fdset: Member @path supports the special "/dev/fdset/N" path
# (since 8.1)
#
@@ -4427,7 +4428,7 @@
# curl backend. URLs must start with "http://".
#
# @cookie: List of cookies to set; format is "name1=content1;
-# name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to
+# name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to
# no cookies.
#
# @cookie-secret: ID of a QCryptoSecret object providing the cookie
@@ -4447,7 +4448,7 @@
# curl backend. URLs must start with "https://".
#
# @cookie: List of cookies to set; format is "name1=content1;
-# name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to
+# name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to
# no cookies.
#
# @sslverify: Whether to verify the SSL certificate's validity
@@ -4653,10 +4654,10 @@
#
# @driver: block driver name
#
-# @node-name: the node name of the new node (Since 2.0). This option
+# @node-name: the node name of the new node (Since 2.0). This option
# is required on the top level of blockdev-add. Valid node names
# start with an alphabetic character and may contain only
-# alphanumeric characters, '-', '.' and '_'. Their maximum length
+# alphanumeric characters, '-', '.' and '_'. Their maximum length
# is 31 characters.
#
# @discard: discard-related options (default: ignore)
@@ -4664,7 +4665,7 @@
# @cache: cache-related options
#
# @read-only: whether the block device should be read-only (default:
-# false). Note that some block drivers support only read-only
+# false). Note that some block drivers support only read-only
# access, either generally or in certain configurations. In this
# case, the default value does not work and the option must be
# specified explicitly.
@@ -5231,8 +5232,8 @@
# monolithcFlat, twoGbMaxExtentSparse and twoGbMaxExtentFlat
# formats. For monolithicFlat, only one entry is required; for
# twoGbMaxExtent* formats, the number of entries required is
-# calculated as extent_number = virtual_size / 2GB. Providing more
-# extents than will be used is an error.
+# calculated as extent_number = virtual_size / 2GB. Providing
+# more extents than will be used is an error.
#
# @subformat: The subformat of the VMDK image. Default:
# "monolithicSparse".
@@ -5244,7 +5245,7 @@
# Default: ide.
#
# @hwversion: Hardware version. The meaningful options are "4" or
-# "6". Default: "4".
+# "6". Default: "4".
#
# @toolsversion: VMware guest tools version. Default: "2147483647"
# (Since 6.2)
@@ -5440,7 +5441,7 @@
##
# @BlockdevAmendOptionsQcow2:
#
-# Driver specific image amend options for qcow2. For now, only
+# Driver specific image amend options for qcow2. For now, only
# encryption options can be amended
#
# @encrypt: Encryption options to be amended
@@ -5543,8 +5544,8 @@
# after this event and must be repaired (Since 2.2; before, every
# BLOCK_IMAGE_CORRUPTED event was fatal)
#
-# .. note:: If action is "stop", a STOP event will eventually follow the
-# BLOCK_IO_ERROR event.
+# .. note:: If action is "stop", a STOP event will eventually follow
+# the BLOCK_IO_ERROR event.
#
# .. qmp-example::
#
@@ -5590,8 +5591,8 @@
# field is a debugging aid for humans, it should not be parsed by
# applications) (since: 2.2)
#
-# .. note:: If action is "stop", a STOP event will eventually follow the
-# BLOCK_IO_ERROR event.
+# .. note:: If action is "stop", a STOP event will eventually follow
+# the BLOCK_IO_ERROR event.
#
# Since: 0.13
#
@@ -6046,9 +6047,9 @@
#
# @name: the name of the internal snapshot to be created
#
-# .. note:: In a transaction, if @name is empty or any snapshot matching
-# @name exists, the operation will fail. Only some image formats
-# support it; for example, qcow2, and rbd.
+# .. note:: In a transaction, if @name is empty or any snapshot
+# matching @name exists, the operation will fail. Only some image
+# formats support it; for example, qcow2, and rbd.
#
# Since: 1.7
##
diff --git a/qapi/block-export.json b/qapi/block-export.json
index 3919a2d5b9..665d5fd026 100644
--- a/qapi/block-export.json
+++ b/qapi/block-export.json
@@ -163,8 +163,8 @@
# Options for exporting a block graph node on some (file) mountpoint
# as a raw image.
#
-# @mountpoint: Path on which to export the block device via FUSE. This
-# must point to an existing regular file.
+# @mountpoint: Path on which to export the block device via FUSE.
+# This must point to an existing regular file.
#
# @growable: Whether writes beyond the EOF should grow the block node
# accordingly. (default: false)
@@ -172,7 +172,7 @@
# @allow-other: If this is off, only qemu's user is allowed access to
# this export. That cannot be changed even with chmod or chown.
# Enabling this option will allow other users access to the export
-# with the FUSE mount option "allow_other". Note that using
+# with the FUSE mount option "allow_other". Note that using
# allow_other as a non-root user requires user_allow_other to be
# enabled in the global fuse.conf configuration file. In auto
# mode (the default), the FUSE export driver will first attempt to
@@ -199,7 +199,7 @@
# @queue-size: the size of virtqueue. Defaults to 256.
#
# @logical-block-size: Logical block size in bytes. Range [512,
-# PAGE_SIZE] and must be power of 2. Defaults to 512 bytes.
+# PAGE_SIZE] and must be power of 2. Defaults to 512 bytes.
#
# @serial: the serial number of virtio block device. Defaults to
# empty string.
diff --git a/qapi/block.json b/qapi/block.json
index ce9490a367..e66666f5c6 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -454,8 +454,8 @@
# different group. In this case the limits specified in the
# parameters will be applied to the new group only.
#
-# I/O limits can be disabled by setting all of them to 0. In this case
-# the device will be removed from its group and the rest of its
+# I/O limits can be disabled by setting all of them to 0. In this
+# case the device will be removed from its group and the rest of its
# members will not be affected. The 'group' parameter is ignored.
#
# Errors:
@@ -519,10 +519,10 @@
# @id: The name or QOM path of the guest device.
#
# @boundaries: list of interval boundary values (see description in
-# BlockLatencyHistogramInfo definition). If specified, all latency
-# histograms are removed, and empty ones created for all io types
-# with intervals corresponding to @boundaries (except for io
-# types, for which specific boundaries are set through the
+# BlockLatencyHistogramInfo definition). If specified, all
+# latency histograms are removed, and empty ones created for all
+# io types with intervals corresponding to @boundaries (except for
+# io types, for which specific boundaries are set through the
# following parameters).
#
# @boundaries-read: list of interval boundary values for read latency
diff --git a/qapi/char.json b/qapi/char.json
index 5e4aeb9799..ef58445cee 100644
--- a/qapi/char.json
+++ b/qapi/char.json
@@ -258,7 +258,7 @@
# @server: create server socket (default: true)
#
# @wait: wait for incoming connection on server sockets (default:
-# false). Silently ignored with server: false. This use is
+# false). Silently ignored with server: false. This use is
# deprecated.
#
# @nodelay: set TCP_NODELAY socket option (default: false)
@@ -388,9 +388,9 @@
#
# @rows: console height, in chars
#
-# .. note:: The options are only effective when the VNC or SDL graphical
-# display backend is active. They are ignored with the GTK, Spice,
-# VNC and D-Bus display backends.
+# .. note:: The options are only effective when the VNC or SDL
+# graphical display backend is active. They are ignored with the
+# GTK, Spice, VNC and D-Bus display backends.
#
# Since: 1.5
##
diff --git a/qapi/control.json b/qapi/control.json
index 950443df9d..336386f79e 100644
--- a/qapi/control.json
+++ b/qapi/control.json
@@ -22,13 +22,14 @@
# "arguments": { "enable": [ "oob" ] } }
# <- { "return": {} }
#
-# .. note:: This command is valid exactly when first connecting: it must
-# be issued before any other command will be accepted, and will fail
-# once the monitor is accepting other commands.
-# (see :doc:`/interop/qmp-spec`)
+# .. note:: This command is valid exactly when first connecting: it
+# must be issued before any other command will be accepted, and
+# will fail once the monitor is accepting other commands. (see
+# :doc:`/interop/qmp-spec`)
#
-# .. note:: The QMP client needs to explicitly enable QMP capabilities,
-# otherwise all the QMP capabilities will be turned off by default.
+# .. note:: The QMP client needs to explicitly enable QMP
+# capabilities, otherwise all the QMP capabilities will be turned
+# off by default.
#
# Since: 0.13
##
@@ -150,7 +151,6 @@
# }
#
# This example has been shortened as the real response is too long.
-#
##
{ 'command': 'query-commands', 'returns': ['CommandInfo'],
'allow-preconfig': true }
diff --git a/qapi/crypto.json b/qapi/crypto.json
index 39b191e8a2..97e02dbd59 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -44,13 +44,13 @@
#
# The supported algorithms for computing content digests
#
-# @md5: MD5. Should not be used in any new code, legacy compat only
+# @md5: MD5. Should not be used in any new code, legacy compat only
#
-# @sha1: SHA-1. Should not be used in any new code, legacy compat only
+# @sha1: SHA-1. Should not be used in any new code, legacy compat only
#
# @sha224: SHA-224. (since 2.7)
#
-# @sha256: SHA-256. Current recommended strong hash.
+# @sha256: SHA-256. Current recommended strong hash.
#
# @sha384: SHA-384. (since 2.7)
#
@@ -440,7 +440,7 @@
#
# @iv: the random initialization vector used for encryption of this
# particular secret. Should be a base64 encrypted string of the
-# 16-byte IV. Mandatory if @keyid is given. Ignored if @keyid is
+# 16-byte IV. Mandatory if @keyid is given. Ignored if @keyid is
# absent.
#
# Features:
diff --git a/qapi/cxl.json b/qapi/cxl.json
index bdfac67c47..e9315d5b4d 100644
--- a/qapi/cxl.json
+++ b/qapi/cxl.json
@@ -369,8 +369,8 @@
# of memory by Device Physical Address within a single Dynamic
# Capacity Region on a CXL Type 3 Device.
#
-# @offset: The offset (in bytes) to the start of the region
-# where the extent belongs to.
+# @offset: The offset (in bytes) to the start of the region where the
+# extent belongs to.
#
# @len: The length of the extent in bytes.
#
@@ -404,16 +404,16 @@
#
# @enable-shared-access: Capacity has already been allocated to a
# different host using free, contiguous or prescriptive policy
-# with a known tag. This policy then instructs the device to
-# make the capacity with the specified tag available to an
-# additional host. Capacity is implicit as it matches that
-# already associated with the tag. Note that the extent list
-# (and hence Device Physical Addresses) used are per host, so
-# a device may use different representations on each host.
-# The ordering of the extents provided to each host is indicated
-# to the host using per extent sequence numbers generated by
-# the device. Has a similar meaning for temporal sharing, but
-# in that case there may be only one host involved.
+# with a known tag. This policy then instructs the device to make
+# the capacity with the specified tag available to an additional
+# host. Capacity is implicit as it matches that already
+# associated with the tag. Note that the extent list (and hence
+# Device Physical Addresses) used are per host, so a device may
+# use different representations on each host. The ordering of the
+# extents provided to each host is indicated to the host using per
+# extent sequence numbers generated by the device. Has a similar
+# meaning for temporal sharing, but in that case there may be only
+# one host involved.
#
# Since: 9.1
##
@@ -429,7 +429,7 @@
#
# Initiate adding dynamic capacity extents to a host. This simulates
# operations defined in Compute Express Link (CXL) Specification,
-# Revision 3.1, Section 7.6.7.6.5. Note that, currently, establishing
+# Revision 3.1, Section 7.6.7.6.5. Note that, currently, establishing
# success or failure of the full Add Dynamic Capacity flow requires
# out of band communication with the OS of the CXL host.
#
@@ -495,7 +495,7 @@
#
# Initiate release of dynamic capacity extents from a host. This
# simulates operations defined in Compute Express Link (CXL)
-# Specification, Revision 3.1, Section 7.6.7.6.6. Note that,
+# Specification, Revision 3.1, Section 7.6.7.6.6. Note that,
# currently, success or failure of the full Release Dynamic Capacity
# flow requires out of band communication with the OS of the CXL host.
#
@@ -514,13 +514,13 @@
# from the host. Instead, the host immediately looses access to
# the released capacity.
#
-# @sanitize-on-release: Bit[5] of the "Flags" field in Compute
-# Express Link (CXL) Specification, Revision 3.1, Table 7-71.
-# When set, the device should sanitize all released capacity as
-# a result of this request. This ensures that all user data
-# and metadata is made permanently unavailable by whatever
-# means is appropriate for the media type. Note that changing
-# encryption keys is not sufficient.
+# @sanitize-on-release: Bit[5] of the "Flags" field in Compute Express
+# Link (CXL) Specification, Revision 3.1, Table 7-71. When set,
+# the device should sanitize all released capacity as a result of
+# this request. This ensures that all user data and metadata is
+# made permanently unavailable by whatever means is appropriate
+# for the media type. Note that changing encryption keys is not
+# sufficient.
#
# @region: The "Region Number" field as defined in Compute Express
# Link Specification, Revision 3.1, Table 7-71. Valid range
diff --git a/qapi/dump.json b/qapi/dump.json
index d8145dad97..d7826c0e32 100644
--- a/qapi/dump.json
+++ b/qapi/dump.json
@@ -55,7 +55,7 @@
# allows using gdb to process the core file.
#
# IMPORTANT: this option can make QEMU allocate several gigabytes
-# of RAM. This can happen for a large guest, or a malicious guest
+# of RAM. This can happen for a large guest, or a malicious guest
# pretending to be large.
#
# Also, paging=true has the following limitations:
diff --git a/qapi/ebpf.json b/qapi/ebpf.json
index e500b5a744..db19ae850f 100644
--- a/qapi/ebpf.json
+++ b/qapi/ebpf.json
@@ -8,7 +8,7 @@
# = eBPF Objects
#
# eBPF object is an ELF binary that contains the eBPF program and eBPF
-# map description(BTF). Overall, eBPF object should contain the
+# map description(BTF). Overall, eBPF object should contain the
# program and enough metadata to create/load eBPF with libbpf. As the
# eBPF maps/program should correspond to QEMU, the eBPF can't be used
# from different QEMU build.
diff --git a/qapi/introspect.json b/qapi/introspect.json
index b15052ec21..14df049580 100644
--- a/qapi/introspect.json
+++ b/qapi/introspect.json
@@ -42,8 +42,8 @@
# with different meta-types).
#
# .. note:: The QAPI schema is also used to help define *internal*
-# interfaces, by defining QAPI types. These are not part of the QMP
-# wire ABI, and therefore not returned by this command.
+# interfaces, by defining QAPI types. These are not part of the
+# QMP wire ABI, and therefore not returned by this command.
#
# Since: 2.5
##
diff --git a/qapi/job.json b/qapi/job.json
index b3957207a4..cfc3beedd2 100644
--- a/qapi/job.json
+++ b/qapi/job.json
@@ -138,7 +138,7 @@
#
# The job will pause as soon as possible, which means transitioning
# into the PAUSED state if it was RUNNING, or into STANDBY if it was
-# READY. The corresponding JOB_STATUS_CHANGE event will be emitted.
+# READY. The corresponding JOB_STATUS_CHANGE event will be emitted.
#
# Cancelling a paused job automatically resumes it.
#
@@ -200,9 +200,9 @@
# dismiss enabled.
#
# This command will refuse to operate on any job that has not yet
-# reached its terminal state, JOB_STATUS_CONCLUDED. For jobs that make
-# use of JOB_READY event, job-cancel or job-complete will still need
-# to be used as appropriate.
+# reached its terminal state, JOB_STATUS_CONCLUDED. For jobs that
+# make use of JOB_READY event, job-cancel or job-complete will still
+# need to be used as appropriate.
#
# @id: The job identifier.
#
diff --git a/qapi/machine-target.json b/qapi/machine-target.json
index 00bbecc905..1a394c08f5 100644
--- a/qapi/machine-target.json
+++ b/qapi/machine-target.json
@@ -12,9 +12,10 @@
# Virtual CPU model.
#
# A CPU model consists of the name of a CPU definition, to which delta
-# changes are applied (e.g. features added/removed). Most magic values
-# that an architecture might require should be hidden behind the name.
-# However, if required, architectures can expose relevant properties.
+# changes are applied (e.g. features added/removed). Most magic
+# values that an architecture might require should be hidden behind
+# the name. However, if required, architectures can expose relevant
+# properties.
#
# @name: the name of the CPU definition the model is based on
#
@@ -46,13 +47,13 @@
#
# .. note:: When a non-migration-safe CPU model is expanded in static
# mode, some features enabled by the CPU model may be omitted,
-# because they can't be implemented by a static CPU model definition
-# (e.g. cache info passthrough and PMU passthrough in x86). If you
-# need an accurate representation of the features enabled by a
-# non-migration-safe CPU model, use @full. If you need a static
-# representation that will keep ABI compatibility even when changing
-# QEMU version or machine-type, use @static (but keep in mind that
-# some features may be omitted).
+# because they can't be implemented by a static CPU model
+# definition (e.g. cache info passthrough and PMU passthrough in
+# x86). If you need an accurate representation of the features
+# enabled by a non-migration-safe CPU model, use @full. If you
+# need a static representation that will keep ABI compatibility
+# even when changing QEMU version or machine-type, use @static (but
+# keep in mind that some features may be omitted).
#
# Since: 2.8
##
@@ -155,11 +156,11 @@
# Some architectures may not support comparing CPU models. s390x
# supports comparing CPU models.
#
-# @modela: description of the first CPU model to compare, referred to as
-# "model A" in CpuModelCompareResult
+# @modela: description of the first CPU model to compare, referred to
+# as "model A" in CpuModelCompareResult
#
-# @modelb: description of the second CPU model to compare, referred to as
-# "model B" in CpuModelCompareResult
+# @modelb: description of the second CPU model to compare, referred to
+# as "model B" in CpuModelCompareResult
#
# Returns: a CpuModelCompareInfo describing how both CPU models
# compare
@@ -185,7 +186,8 @@
#
# Baseline two CPU models, @modela and @modelb, creating a compatible
# third model. The created model will always be a static,
-# migration-safe CPU model (see "static" CPU model expansion for details).
+# migration-safe CPU model (see "static" CPU model expansion for
+# details).
#
# This interface can be used by tooling to create a compatible CPU
# model out two CPU models. The created CPU model will be identical
@@ -242,12 +244,12 @@
#
# @model: the expanded CpuModelInfo.
#
-# @deprecated-props: a list of properties that are flagged as deprecated
-# by the CPU vendor. The list depends on the CpuModelExpansionType:
-# "static" properties are a subset of the enabled-properties for
-# the expanded model; "full" properties are a set of properties
-# that are deprecated across all models for the architecture.
-# (since: 9.1).
+# @deprecated-props: a list of properties that are flagged as
+# deprecated by the CPU vendor. The list depends on the
+# CpuModelExpansionType: "static" properties are a subset of the
+# enabled-properties for the expanded model; "full" properties are
+# a set of properties that are deprecated across all models for
+# the architecture. (since: 9.1).
#
# Since: 2.8
##
@@ -265,9 +267,9 @@
# @query-cpu-model-expansion:
#
# Expands a given CPU model, @model, (or a combination of CPU model +
-# additional options) to different granularities, specified by
-# @type, allowing tooling to get an understanding what a specific
-# CPU model looks like in QEMU under a certain configuration.
+# additional options) to different granularities, specified by @type,
+# allowing tooling to get an understanding what a specific CPU model
+# looks like in QEMU under a certain configuration.
#
# This interface can be used to query the "host" CPU model.
#
@@ -288,7 +290,7 @@
# Using query-cpu-model-expansion while using these is not advised.
#
# Some architectures may not support all expansion types. s390x
-# supports "full" and "static". Arm only supports "full".
+# supports "full" and "static". Arm only supports "full".
#
# @model: description of the CPU model to expand
#
@@ -355,7 +357,7 @@
# CPU model attributes that prevent the CPU from running. If the QOM
# property is read-only, that means there's no known way to make the
# CPU model run in the current host. Implementations that choose not
-# to provide specific information return the property name "type". If
+# to provide specific information return the property name "type". If
# the property is read-write, it means that it MAY be possible to run
# the CPU model in the current host if that property is changed.
# Management software can use it as hints to suggest or choose an
diff --git a/qapi/machine.json b/qapi/machine.json
index fcfd249e2d..4582e58f7d 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -27,8 +27,8 @@
# @loongarch64: since 7.1
#
# .. note:: The resulting QMP strings can be appended to the
-# "qemu-system-" prefix to produce the corresponding QEMU executable
-# name. This is true even for "qemu-system-x86_64".
+# "qemu-system-" prefix to produce the corresponding QEMU
+# executable name. This is true even for "qemu-system-x86_64".
#
# Since: 3.0
##
@@ -371,8 +371,8 @@
#
# .. note:: A guest may or may not respond to this command. This
# command returning does not indicate that a guest has accepted the
-# request or that it has shut down. Many guests will respond to this
-# command by prompting the user in some way.
+# request or that it has shut down. Many guests will respond to
+# this command by prompting the user in some way.
#
# .. qmp-example::
#
@@ -437,7 +437,7 @@
# @inject-nmi:
#
# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or
-# all CPUs (ppc64). The command fails when the guest doesn't support
+# all CPUs (ppc64). The command fails when the guest doesn't support
# injecting.
#
# Since: 0.14
@@ -988,8 +988,8 @@
# @cluster-id: cluster number within the parent container the CPU
# belongs to (since 7.1)
#
-# @module-id: module number within the parent container the CPU belongs
-# to (since 9.1)
+# @module-id: module number within the parent container the CPU
+# belongs to (since 9.1)
#
# @core-id: core number within the parent container the CPU belongs to
#
@@ -1132,8 +1132,8 @@
# - If no balloon device is present, DeviceNotActive
#
# .. note:: This command just issues a request to the guest. When it
-# returns, the balloon size may not have changed. A guest can change
-# the balloon size independent of this command.
+# returns, the balloon size may not have changed. A guest can
+# change the balloon size independent of this command.
#
# Since: 0.14
#
@@ -1659,8 +1659,8 @@
# The members other than @cpus and @maxcpus define a topology of
# containers.
#
-# The ordering from highest/coarsest to lowest/finest is:
-# @drawers, @books, @sockets, @dies, @clusters, @cores, @threads.
+# The ordering from highest/coarsest to lowest/finest is: @drawers,
+# @books, @sockets, @dies, @clusters, @cores, @threads.
#
# Different architectures support different subsets of topology
# containers.
diff --git a/qapi/migration.json b/qapi/migration.json
index 073b67c052..7324571e92 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -142,8 +142,8 @@
#
# @postcopy-paused: during postcopy but paused. (since 3.0)
#
-# @postcopy-recover-setup: setup phase for a postcopy recovery process,
-# preparing for a recovery phase to start. (since 9.1)
+# @postcopy-recover-setup: setup phase for a postcopy recovery
+# process, preparing for a recovery phase to start. (since 9.1)
#
# @postcopy-recover: trying to recover from a paused postcopy. (since
# 3.0)
@@ -245,10 +245,10 @@
# blocked. Present and non-empty when migration is blocked.
# (since 6.0)
#
-# @dirty-limit-throttle-time-per-round: Maximum throttle time
-# (in microseconds) of virtual CPUs each dirty ring full round,
-# which shows how MigrationCapability dirty-limit affects the
-# guest during live migration. (Since 8.1)
+# @dirty-limit-throttle-time-per-round: Maximum throttle time (in
+# microseconds) of virtual CPUs each dirty ring full round, which
+# shows how MigrationCapability dirty-limit affects the guest
+# during live migration. (Since 8.1)
#
# @dirty-limit-ring-full-time: Estimated average dirty ring full time
# (in microseconds) for each dirty ring full round. The value
@@ -381,7 +381,7 @@
# Migration capabilities enumeration
#
# @xbzrle: Migration supports xbzrle (Xor Based Zero Run Length
-# Encoding). This feature allows us to minimize migration traffic
+# Encoding). This feature allows us to minimize migration traffic
# for certain work loads, by sending compressed difference of the
# pages
#
@@ -393,8 +393,8 @@
# efficiently. This essentially saves 1MB of zeroes per block on
# the wire. Enabling requires source and target VM to support
# this feature. To enable it is sufficient to enable the
-# capability on the source VM. The feature is disabled by default.
-# (since 1.6)
+# capability on the source VM. The feature is disabled by
+# default. (since 1.6)
#
# @events: generate events for each migration state change (since 2.4)
#
@@ -562,9 +562,9 @@
# @zstd: use zstd compression method.
#
# @qpl: use qpl compression method. Query Processing Library(qpl) is
-# based on the deflate compression algorithm and use the Intel
-# In-Memory Analytics Accelerator(IAA) accelerated compression
-# and decompression. (Since 9.1)
+# based on the deflate compression algorithm and use the Intel
+# In-Memory Analytics Accelerator(IAA) accelerated compression and
+# decompression. (Since 9.1)
#
# @uadk: use UADK library compression method. (Since 9.1)
#
@@ -790,13 +790,13 @@
# migration, the compression level is an integer between 0 and 9,
# where 0 means no compression, 1 means the best compression
# speed, and 9 means best compression ratio which will consume
-# more CPU. Defaults to 1. (Since 5.0)
+# more CPU. Defaults to 1. (Since 5.0)
#
# @multifd-zstd-level: Set the compression level to be used in live
# migration, the compression level is an integer between 0 and 20,
# where 0 means no compression, 1 means the best compression
# speed, and 20 means best compression ratio which will consume
-# more CPU. Defaults to 1. (Since 5.0)
+# more CPU. Defaults to 1. (Since 5.0)
#
# @block-bitmap-mapping: Maps block nodes and bitmaps on them to
# aliases for the purpose of dirty bitmap migration. Such aliases
@@ -965,13 +965,13 @@
# migration, the compression level is an integer between 0 and 9,
# where 0 means no compression, 1 means the best compression
# speed, and 9 means best compression ratio which will consume
-# more CPU. Defaults to 1. (Since 5.0)
+# more CPU. Defaults to 1. (Since 5.0)
#
# @multifd-zstd-level: Set the compression level to be used in live
# migration, the compression level is an integer between 0 and 20,
# where 0 means no compression, 1 means the best compression
# speed, and 20 means best compression ratio which will consume
-# more CPU. Defaults to 1. (Since 5.0)
+# more CPU. Defaults to 1. (Since 5.0)
#
# @block-bitmap-mapping: Maps block nodes and bitmaps on them to
# aliases for the purpose of dirty bitmap migration. Such aliases
@@ -1169,13 +1169,13 @@
# migration, the compression level is an integer between 0 and 9,
# where 0 means no compression, 1 means the best compression
# speed, and 9 means best compression ratio which will consume
-# more CPU. Defaults to 1. (Since 5.0)
+# more CPU. Defaults to 1. (Since 5.0)
#
# @multifd-zstd-level: Set the compression level to be used in live
# migration, the compression level is an integer between 0 and 20,
# where 0 means no compression, 1 means the best compression
# speed, and 20 means best compression ratio which will consume
-# more CPU. Defaults to 1. (Since 5.0)
+# more CPU. Defaults to 1. (Since 5.0)
#
# @block-bitmap-mapping: Maps block nodes and bitmaps on them to
# aliases for the purpose of dirty bitmap migration. Such aliases
@@ -1201,7 +1201,7 @@
# Defaults to 1. (Since 8.1)
#
# @mode: Migration mode. See description in @MigMode. Default is
-# 'normal'. (Since 8.2)
+# 'normal'. (Since 8.2)
#
# @zero-page-detection: Whether and how to detect zero pages.
# See description in @ZeroPageDetection. Default is 'multifd'.
@@ -1459,8 +1459,8 @@
#
# Cancel the current executing migration process.
#
-# .. note:: This command succeeds even if there is no migration process
-# running.
+# .. note:: This command succeeds even if there is no migration
+# process running.
#
# Since: 0.14
#
@@ -1604,7 +1604,7 @@
# should not be used.
#
# 4. The uri argument should have the Uniform Resource Identifier
-# of default destination VM. This connection will be bound to
+# of default destination VM. This connection will be bound to
# default network.
#
# 5. For now, number of migration streams is restricted to one,
@@ -1650,7 +1650,6 @@
# "filename": "/tmp/migfile",
# "offset": "0x1000" } } ] } }
# <- { "return": {} }
-#
##
{ 'command': 'migrate',
'data': {'*uri': 'str',
@@ -1671,7 +1670,8 @@
#
# @exit-on-error: Exit on incoming migration failure. Default true.
# When set to false, the failure triggers a MIGRATION event, and
-# error details could be retrieved with query-migrate. (since 9.1)
+# error details could be retrieved with query-migrate.
+# (since 9.1)
#
# Since: 2.3
#
@@ -1938,9 +1938,9 @@
# @UNPLUG_PRIMARY:
#
# Emitted from source side of a migration when migration state is
-# WAIT_UNPLUG. Device was unplugged by guest operating system. Device
-# resources in QEMU are kept on standby to be able to re-plug it in
-# case of migration failure.
+# WAIT_UNPLUG. Device was unplugged by guest operating system.
+# Device resources in QEMU are kept on standby to be able to re-plug
+# it in case of migration failure.
#
# @device-id: QEMU device id of the unplugged device
#
@@ -2084,16 +2084,16 @@
# This mode tracks page modification per each vCPU separately. It
# requires that KVM accelerator property "dirty-ring-size" is set.
#
-# @calc-time: time period for which dirty page rate is calculated.
-# By default it is specified in seconds, but the unit can be set
+# @calc-time: time period for which dirty page rate is calculated. By
+# default it is specified in seconds, but the unit can be set
# explicitly with @calc-time-unit. Note that larger @calc-time
# values will typically result in smaller dirty page rates because
-# page dirtying is a one-time event. Once some page is counted
-# as dirty during @calc-time period, further writes to this page
-# will not increase dirty page rate anymore.
+# page dirtying is a one-time event. Once some page is counted as
+# dirty during @calc-time period, further writes to this page will
+# not increase dirty page rate anymore.
#
-# @calc-time-unit: time unit in which @calc-time is specified.
-# By default it is seconds. (Since 8.2)
+# @calc-time-unit: time unit in which @calc-time is specified. By
+# default it is seconds. (Since 8.2)
#
# @sample-pages: number of sampled pages per each GiB of guest memory.
# Default value is 512. For 4KiB guest pages this corresponds to
diff --git a/qapi/misc.json b/qapi/misc.json
index 4a6f3baeae..559b66f201 100644
--- a/qapi/misc.json
+++ b/qapi/misc.json
@@ -26,7 +26,7 @@
# @skipauth: whether to skip authentication. Only applies to "vnc"
# and "spice" protocols
#
-# @tls: whether to perform TLS. Only applies to the "spice" protocol
+# @tls: whether to perform TLS. Only applies to the "spice" protocol
#
# Since: 0.14
#
@@ -104,8 +104,8 @@
# Returns a list of information about each iothread.
#
# .. note:: This list excludes the QEMU main loop thread, which is not
-# declared using the ``-object iothread`` command-line option. It is
-# always the main thread of the process.
+# declared using the ``-object iothread`` command-line option. It
+# is always the main thread of the process.
#
# Returns: a list of @IOThreadInfo for each iothread
#
@@ -141,8 +141,8 @@
# guest remains paused once migration finishes, as if the ``-S``
# option was passed on the command line.
#
-# In the "suspended" state, it will completely stop the VM and cause
-# a transition to the "paused" state. (Since 9.0)
+# In the "suspended" state, it will completely stop the VM and
+# cause a transition to the "paused" state. (Since 9.0)
#
# .. qmp-example::
#
@@ -158,15 +158,15 @@
#
# Since: 0.14
#
-# .. note:: This command will succeed if the guest is currently running.
-# It will also succeed if the guest is in the "inmigrate" state; in
-# this case, the effect of the command is to make sure the guest
-# starts once migration finishes, removing the effect of the ``-S``
-# command line option if it was passed.
+# .. note:: This command will succeed if the guest is currently
+# running. It will also succeed if the guest is in the "inmigrate"
+# state; in this case, the effect of the command is to make sure
+# the guest starts once migration finishes, removing the effect of
+# the ``-S`` command line option if it was passed.
#
# If the VM was previously suspended, and not been reset or woken,
-# this command will transition back to the "suspended" state. (Since
-# 9.0)
+# this command will transition back to the "suspended" state.
+# (Since 9.0)
#
# .. qmp-example::
#
@@ -227,8 +227,8 @@
#
# Known limitations:
#
-# * This command is stateless, this means that commands that
-# depend on state information (such as getfd) might not work.
+# * This command is stateless, this means that commands that depend
+# on state information (such as getfd) might not work.
#
# * Commands that prompt the user for data don't currently work.
#
@@ -341,7 +341,8 @@
#
# .. note:: The list of fd sets is shared by all monitor connections.
#
-# .. note:: If @fdset-id is not specified, a new fd set will be created.
+# .. note:: If @fdset-id is not specified, a new fd set will be
+# created.
#
# Since: 1.2
#
diff --git a/qapi/net.json b/qapi/net.json
index 31b3417d65..87fc0d0b28 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -22,9 +22,9 @@
#
# Since: 0.14
#
-# .. note:: Not all network adapters support setting link status. This
-# command will succeed even if the network adapter does not support
-# link status notification.
+# .. note:: Not all network adapters support setting link status.
+# This command will succeed even if the network adapter does not
+# support link status notification.
#
# .. qmp-example::
#
@@ -403,7 +403,7 @@
# Connect a client to a netmap-enabled NIC or to a VALE switch port
#
# @ifname: Either the name of an existing network interface supported
-# by netmap, or the name of a VALE port (created on the fly). A
+# by netmap, or the name of a VALE port (created on the fly). A
# VALE port name is in the form 'valeXXX:YYY', where XXX and YYY
# are non-negative integers. XXX identifies a switch and YYY
# identifies a port of the switch. VALE ports having the same XXX
@@ -535,13 +535,13 @@
# interfaces that are in host mode and also with the host.
#
# @start-address: The starting IPv4 address to use for the interface.
-# Must be in the private IP range (RFC 1918). Must be specified
+# Must be in the private IP range (RFC 1918). Must be specified
# along with @end-address and @subnet-mask. This address is used
# as the gateway address. The subsequent address up to and
# including end-address are placed in the DHCP pool.
#
# @end-address: The DHCP IPv4 range end address to use for the
-# interface. Must be in the private IP range (RFC 1918). Must be
+# interface. Must be in the private IP range (RFC 1918). Must be
# specified along with @start-address and @subnet-mask.
#
# @subnet-mask: The IPv4 subnet mask to use on the interface. Must be
@@ -556,7 +556,7 @@
# network vmnet interface should be added to. If set, no DHCP
# service is provided for this interface and network communication
# is allowed only with other interfaces added to this network
-# identified by the UUID. Requires at least macOS Big Sur 11.0.
+# identified by the UUID. Requires at least macOS Big Sur 11.0.
#
# Since: 7.1
##
@@ -575,20 +575,20 @@
# vmnet (shared mode) network backend.
#
# Allows traffic originating from the vmnet interface to reach the
-# Internet through a network address translator (NAT). The vmnet
+# Internet through a network address translator (NAT). The vmnet
# interface can communicate with the host and with other shared mode
# interfaces on the same subnet. If no DHCP settings, subnet mask and
# IPv6 prefix specified, the interface can communicate with any of
# other interfaces in shared mode.
#
# @start-address: The starting IPv4 address to use for the interface.
-# Must be in the private IP range (RFC 1918). Must be specified
+# Must be in the private IP range (RFC 1918). Must be specified
# along with @end-address and @subnet-mask. This address is used
# as the gateway address. The subsequent address up to and
# including end-address are placed in the DHCP pool.
#
# @end-address: The DHCP IPv4 range end address to use for the
-# interface. Must be in the private IP range (RFC 1918). Must be
+# interface. Must be in the private IP range (RFC 1918). Must be
# specified along with @start-address and @subnet-mask.
#
# @subnet-mask: The IPv4 subnet mask to use on the interface. Must be
@@ -703,12 +703,19 @@
# Available netdev drivers.
#
# @l2tpv3: since 2.1
+#
# @vhost-vdpa: since 5.1
+#
# @vmnet-host: since 7.1
+#
# @vmnet-shared: since 7.1
+#
# @vmnet-bridged: since 7.1
+#
# @stream: since 7.2
+#
# @dgram: since 7.2
+#
# @af-xdp: since 8.2
#
# Since: 2.7
diff --git a/qapi/pci.json b/qapi/pci.json
index ec28f1d9b4..78bee57b77 100644
--- a/qapi/pci.json
+++ b/qapi/pci.json
@@ -310,6 +310,5 @@
# }
#
# This example has been shortened as the real response is too long.
-#
##
{ 'command': 'query-pci', 'returns': ['PciInfo'] }
diff --git a/qapi/qdev.json b/qapi/qdev.json
index e91ca0309d..53d147c7b4 100644
--- a/qapi/qdev.json
+++ b/qapi/qdev.json
@@ -59,8 +59,8 @@
# the 'docs/qdev-device-use.txt' file.
#
# 3. It's possible to list device properties by running QEMU with
-# the ``-device DEVICE,help`` command-line argument, where DEVICE
-# is the device's name.
+# the ``-device DEVICE,help`` command-line argument, where
+# DEVICE is the device's name.
#
# .. qmp-example::
#
@@ -94,13 +94,13 @@
#
# .. note:: When this command completes, the device may not be removed
# from the guest. Hot removal is an operation that requires guest
-# cooperation. This command merely requests that the guest begin the
-# hot removal process. Completion of the device removal process is
-# signaled with a DEVICE_DELETED event. Guest reset will
-# automatically complete removal for all devices. If a guest-side
-# error in the hot removal process is detected, the device will not
-# be removed and a DEVICE_UNPLUG_GUEST_ERROR event is sent. Some
-# errors cannot be detected.
+# cooperation. This command merely requests that the guest begin
+# the hot removal process. Completion of the device removal
+# process is signaled with a DEVICE_DELETED event. Guest reset
+# will automatically complete removal for all devices. If a
+# guest-side error in the hot removal process is detected, the
+# device will not be removed and a DEVICE_UNPLUG_GUEST_ERROR event
+# is sent. Some errors cannot be detected.
#
# Since: 0.14
#
@@ -123,7 +123,7 @@
#
# Emitted whenever the device removal completion is acknowledged by
# the guest. At this point, it's safe to reuse the specified device
-# ID. Device removal can be initiated by the guest or by HMP/QMP
+# ID. Device removal can be initiated by the guest or by HMP/QMP
# commands.
#
# @device: the device's ID if it has one
diff --git a/qapi/qom.json b/qapi/qom.json
index fc035f126a..321ccd708a 100644
--- a/qapi/qom.json
+++ b/qapi/qom.json
@@ -356,7 +356,7 @@
# filter list. "head" means the filter is inserted at the head of
# the filter list, before any existing filters. "tail" means the
# filter is inserted at the tail of the filter list, behind any
-# existing filters (default). "id=<id>" means the filter is
+# existing filters (default). "id=<id>" means the filter is
# inserted before or behind the filter specified by <id>,
# depending on the @insert property. (default: "tail")
#
@@ -620,8 +620,8 @@
# .. note:: prealloc=true and reserve=false cannot be set at the same
# time. With reserve=true, the behavior depends on the operating
# system: for example, Linux will not reserve swap space for shared
-# file mappings -- "not applicable". In contrast, reserve=false will
-# bail out if it cannot be configured accordingly.
+# file mappings -- "not applicable". In contrast, reserve=false
+# will bail out if it cannot be configured accordingly.
#
# Since: 2.1
##
@@ -646,9 +646,9 @@
# @align: the base address alignment when QEMU mmap(2)s @mem-path.
# Some backend stores specified by @mem-path require an alignment
# different than the default one used by QEMU, e.g. the device DAX
-# /dev/dax0.0 requires 2M alignment rather than 4K. In such cases,
-# users can specify the required alignment via this option. 0
-# selects a default alignment (currently the page size).
+# /dev/dax0.0 requires 2M alignment rather than 4K. In such
+# cases, users can specify the required alignment via this option.
+# 0 selects a default alignment (currently the page size).
# (default: 0)
#
# @offset: the offset into the target file that the region starts at.
@@ -709,7 +709,7 @@
#
# @hugetlbsize: the hugetlb page size on systems that support multiple
# hugetlb page sizes (it must be a power of 2 value supported by
-# the system). 0 selects a default page size. This option is
+# the system). 0 selects a default page size. This option is
# ignored if @hugetlb is false. (default: 0)
#
# @seal: if true, create a sealed-file, which will block further
@@ -930,17 +930,17 @@
#
# @handle: SEV firmware handle (default: 0)
#
-# @legacy-vm-type: Use legacy KVM_SEV_INIT KVM interface for creating the VM.
-# The newer KVM_SEV_INIT2 interface, from Linux >= 6.10, syncs
-# additional vCPU state when initializing the VMSA structures,
-# which will result in a different guest measurement. Set
-# this to 'on' to force compatibility with older QEMU or kernel
-# versions that rely on legacy KVM_SEV_INIT behavior. 'auto'
-# will behave identically to 'on', but will automatically
-# switch to using KVM_SEV_INIT2 if the user specifies any
-# additional options that require it. If set to 'off', QEMU
-# will require KVM_SEV_INIT2 unconditionally.
-# (default: off) (since 9.1)
+# @legacy-vm-type: Use legacy KVM_SEV_INIT KVM interface for creating
+# the VM. The newer KVM_SEV_INIT2 interface, from Linux >= 6.10,
+# syncs additional vCPU state when initializing the VMSA
+# structures, which will result in a different guest measurement.
+# Set this to 'on' to force compatibility with older QEMU or kernel
+# versions that rely on legacy KVM_SEV_INIT behavior. 'auto' will
+# behave identically to 'on', but will automatically switch to
+# using KVM_SEV_INIT2 if the user specifies any additional options
+# that require it. If set to 'off', QEMU will require
+# KVM_SEV_INIT2 unconditionally.
+# (default: off) (since 9.1)
#
# Since: 2.12
##
@@ -992,7 +992,7 @@
# @vcek-disabled: Guests are by default allowed to choose between VLEK
# (Versioned Loaded Endorsement Key) or VCEK (Versioned Chip
# Endorsement Key) when requesting attestation reports from
-# firmware. Set this to true to disable the use of VCEK.
+# firmware. Set this to true to disable the use of VCEK.
# (default: false) (since: 9.1)
#
# Since: 9.1
diff --git a/qapi/rocker.json b/qapi/rocker.json
index 2e63dcb3d6..6950ca9602 100644
--- a/qapi/rocker.json
+++ b/qapi/rocker.json
@@ -288,8 +288,8 @@
#
# @ttl-check: perform TTL check
#
-# .. note:: Optional members may or may not appear in the group depending
-# if they're relevant to the group type.
+# .. note:: Optional members may or may not appear in the group
+# depending if they're relevant to the group type.
#
# Since: 2.4
##
diff --git a/qapi/run-state.json b/qapi/run-state.json
index 287691ca0e..ce95cfa46b 100644
--- a/qapi/run-state.json
+++ b/qapi/run-state.json
@@ -527,20 +527,20 @@
# Hyper-V specific guest panic information (HV crash MSRs)
#
# @arg1: for Windows, STOP code for the guest crash. For Linux,
-# an error code.
+# an error code.
#
# @arg2: for Windows, first argument of the STOP. For Linux, the
-# guest OS ID, which has the kernel version in bits 16-47
-# and 0x8100 in bits 48-63.
+# guest OS ID, which has the kernel version in bits 16-47 and
+# 0x8100 in bits 48-63.
#
# @arg3: for Windows, second argument of the STOP. For Linux, the
-# program counter of the guest.
+# program counter of the guest.
#
# @arg4: for Windows, third argument of the STOP. For Linux, the
-# RAX register (x86) or the stack pointer (aarch64) of the guest.
+# RAX register (x86) or the stack pointer (aarch64) of the guest.
#
# @arg5: for Windows, fourth argument of the STOP. For x86 Linux, the
-# stack pointer of the guest.
+# stack pointer of the guest.
#
# Since: 2.9
##
diff --git a/qapi/sockets.json b/qapi/sockets.json
index e76fdb9925..6a95023315 100644
--- a/qapi/sockets.json
+++ b/qapi/sockets.json
@@ -29,6 +29,7 @@
# @InetSocketAddressBase:
#
# @host: host part of the address
+#
# @port: port part of the address
##
{ 'struct': 'InetSocketAddressBase',
@@ -104,8 +105,8 @@
#
# @port: port
#
-# .. note:: String types are used to allow for possible future hostname
-# or service resolution support.
+# .. note:: String types are used to allow for possible future
+# hostname or service resolution support.
#
# Since: 2.8
##
diff --git a/qapi/stats.json b/qapi/stats.json
index efbbe26244..8902ef94e0 100644
--- a/qapi/stats.json
+++ b/qapi/stats.json
@@ -117,10 +117,10 @@
# information for that target.
#
# @target: the kind of objects to query. Note that each possible
-# target may enable additional filtering options
+# target may enable additional filtering options
#
-# @providers: which providers to request statistics from, and optionally
-# which named values to return within each provider
+# @providers: which providers to request statistics from, and
+# optionally which named values to return within each provider
#
# Since: 7.1
##
diff --git a/qapi/transaction.json b/qapi/transaction.json
index b0ae3437eb..021e383496 100644
--- a/qapi/transaction.json
+++ b/qapi/transaction.json
@@ -238,8 +238,8 @@
# - Any errors from commands in the transaction
#
# .. note:: The transaction aborts on the first failure. Therefore,
-# there will be information on only one failed operation returned in
-# an error condition, and subsequent actions will not have been
+# there will be information on only one failed operation returned
+# in an error condition, and subsequent actions will not have been
# attempted.
#
# Since: 1.1
diff --git a/qapi/ui.json b/qapi/ui.json
index 5daca5168c..8c8464faac 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -48,8 +48,8 @@
# @password: the new password
#
# @connected: How to handle existing clients when changing the
-# password. If nothing is specified, defaults to 'keep'. For VNC,
-# only 'keep' is currently implemented.
+# password. If nothing is specified, defaults to 'keep'. For
+# VNC, only 'keep' is currently implemented.
#
# Since: 7.0
##
@@ -107,10 +107,11 @@
# - '+INT' where INT is the number of seconds from now (integer)
# - 'INT' where INT is the absolute time in seconds
#
-# .. note:: Time is relative to the server and currently there is no way
-# to coordinate server time with client time. It is not recommended
-# to use the absolute time version of the @time parameter unless
-# you're sure you are on the same machine as the QEMU instance.
+# .. note:: Time is relative to the server and currently there is no
+# way to coordinate server time with client time. It is not
+# recommended to use the absolute time version of the @time
+# parameter unless you're sure you are on the same machine as the
+# QEMU instance.
#
# Since: 7.0
##
@@ -624,7 +625,7 @@
# @id: vnc server name.
#
# @server: A list of @VncBasincInfo describing all listening sockets.
-# The list can be empty (in case the vnc server is disabled). It
+# The list can be empty (in case the vnc server is disabled). It
# also may have multiple entries: normal + websocket, possibly
# also ipv4 + ipv6 in the future.
#
@@ -719,8 +720,8 @@
#
# @client: client information
#
-# .. note:: This event is emitted before any authentication takes place,
-# thus the authentication ID is not provided.
+# .. note:: This event is emitted before any authentication takes
+# place, thus the authentication ID is not provided.
#
# Since: 0.13
#
@@ -1266,7 +1267,7 @@
# Since: 2.6
#
# .. note:: The consoles are visible in the qom tree, under
-# ``/backend/console[$index]``. They have a device link and head
+# ``/backend/console[$index]``. They have a device link and head
# property, so it is possible to map which console belongs to which
# device and display.
#
@@ -1416,11 +1417,11 @@
#
# @left-command-key: Enable/disable forwarding of left command key to
# guest. Allows command-tab window switching on the host without
-# sending this key to the guest when "off". Defaults to "on"
+# sending this key to the guest when "off". Defaults to "on"
#
# @full-grab: Capture all key presses, including system combos. This
# requires accessibility permissions, since it performs a global
-# grab on key events. (default: off) See
+# grab on key events. (default: off) See
# https://support.apple.com/en-in/guide/mac-help/mh32356/mac
#
# @swap-opt-cmd: Swap the Option and Command keys so that their key
@@ -1432,7 +1433,7 @@
# "off". (Since 8.2)
#
# @zoom-interpolation: Apply interpolation to smooth output when
-# zoom-to-fit is enabled. Defaults to "off". (Since 9.0)
+# zoom-to-fit is enabled. Defaults to "off". (Since 9.0)
#
# Since: 7.0
##
diff --git a/qapi/vfio.json b/qapi/vfio.json
index 40cbcde02e..eccca82068 100644
--- a/qapi/vfio.json
+++ b/qapi/vfio.json
@@ -15,16 +15,16 @@
#
# @running: The device is running.
#
-# @stop-copy: The device is stopped and its internal state is available
-# for reading.
+# @stop-copy: The device is stopped and its internal state is
+# available for reading.
#
# @resuming: The device is stopped and its internal state is available
# for writing.
#
# @running-p2p: The device is running in the P2P quiescent state.
#
-# @pre-copy: The device is running, tracking its internal state and its
-# internal state is available for reading.
+# @pre-copy: The device is running, tracking its internal state and
+# its internal state is available for reading.
#
# @pre-copy-p2p: The device is running in the P2P quiescent state,
# tracking its internal state and its internal state is available
diff --git a/qapi/virtio.json b/qapi/virtio.json
index 26df8b3064..2529c2d8b2 100644
--- a/qapi/virtio.json
+++ b/qapi/virtio.json
@@ -568,9 +568,9 @@
# .. note:: last_avail_idx will not be displayed in the case where the
# selected VirtIODevice has a running vhost device and the
# VirtIODevice VirtQueue index (queue) does not exist for the
-# corresponding vhost device vhost_virtqueue. Also, shadow_avail_idx
-# will not be displayed in the case where the selected VirtIODevice
-# has a running vhost device.
+# corresponding vhost device vhost_virtqueue. Also,
+# shadow_avail_idx will not be displayed in the case where the
+# selected VirtIODevice has a running vhost device.
#
# Since: 7.2
#
--
2.45.0© 2016 - 2024 Red Hat, Inc.