Add an additional test to further exercise the IOMMU where we attempt to
initialize the command, fault and page-request queues.
These steps are taken from chapter 6.2 of the RISC-V IOMMU spec,
"Guidelines for initialization". It emulates what we expect from the
software/OS when initializing the IOMMU.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
---
tests/qtest/libqos/riscv-iommu.h | 29 +++++++
tests/qtest/riscv-iommu-test.c | 141 +++++++++++++++++++++++++++++++
2 files changed, 170 insertions(+)
diff --git a/tests/qtest/libqos/riscv-iommu.h b/tests/qtest/libqos/riscv-iommu.h
index d123efb41f..c62ddedbac 100644
--- a/tests/qtest/libqos/riscv-iommu.h
+++ b/tests/qtest/libqos/riscv-iommu.h
@@ -62,6 +62,35 @@
#define RISCV_IOMMU_REG_IPSR 0x0054
+#define RISCV_IOMMU_REG_IVEC 0x02F8
+#define RISCV_IOMMU_REG_IVEC_CIV GENMASK_ULL(3, 0)
+#define RISCV_IOMMU_REG_IVEC_FIV GENMASK_ULL(7, 4)
+#define RISCV_IOMMU_REG_IVEC_PIV GENMASK_ULL(15, 12)
+
+#define RISCV_IOMMU_REG_CQB 0x0018
+#define RISCV_IOMMU_CQB_PPN_START 10
+#define RISCV_IOMMU_CQB_PPN_LEN 44
+#define RISCV_IOMMU_CQB_LOG2SZ_START 0
+#define RISCV_IOMMU_CQB_LOG2SZ_LEN 5
+
+#define RISCV_IOMMU_REG_CQT 0x0024
+
+#define RISCV_IOMMU_REG_FQB 0x0028
+#define RISCV_IOMMU_FQB_PPN_START 10
+#define RISCV_IOMMU_FQB_PPN_LEN 44
+#define RISCV_IOMMU_FQB_LOG2SZ_START 0
+#define RISCV_IOMMU_FQB_LOG2SZ_LEN 5
+
+#define RISCV_IOMMU_REG_FQT 0x0034
+
+#define RISCV_IOMMU_REG_PQB 0x0038
+#define RISCV_IOMMU_PQB_PPN_START 10
+#define RISCV_IOMMU_PQB_PPN_LEN 44
+#define RISCV_IOMMU_PQB_LOG2SZ_START 0
+#define RISCV_IOMMU_PQB_LOG2SZ_LEN 5
+
+#define RISCV_IOMMU_REG_PQT 0x0044
+
typedef struct QRISCVIOMMU {
QOSGraphObject obj;
QPCIDevice dev;
diff --git a/tests/qtest/riscv-iommu-test.c b/tests/qtest/riscv-iommu-test.c
index 7f0dbd0211..9e2afcb4b9 100644
--- a/tests/qtest/riscv-iommu-test.c
+++ b/tests/qtest/riscv-iommu-test.c
@@ -33,6 +33,20 @@ static uint64_t riscv_iommu_read_reg64(QRISCVIOMMU *r_iommu, int reg_offset)
return reg;
}
+static void riscv_iommu_write_reg32(QRISCVIOMMU *r_iommu, int reg_offset,
+ uint32_t val)
+{
+ qpci_memwrite(&r_iommu->dev, r_iommu->reg_bar, reg_offset,
+ &val, sizeof(val));
+}
+
+static void riscv_iommu_write_reg64(QRISCVIOMMU *r_iommu, int reg_offset,
+ uint64_t val)
+{
+ qpci_memwrite(&r_iommu->dev, r_iommu->reg_bar, reg_offset,
+ &val, sizeof(val));
+}
+
static void test_pci_config(void *obj, void *data, QGuestAllocator *t_alloc)
{
QRISCVIOMMU *r_iommu = obj;
@@ -84,10 +98,137 @@ static void test_reg_reset(void *obj, void *data, QGuestAllocator *t_alloc)
g_assert_cmpuint(reg, ==, 0);
}
+/*
+ * Common timeout-based poll for CQCSR, FQCSR and PQCSR. All
+ * their ON bits are mapped as RISCV_IOMMU_QUEUE_ACTIVE (16),
+ */
+static void qtest_wait_for_queue_active(QRISCVIOMMU *r_iommu,
+ uint32_t queue_csr)
+{
+ QTestState *qts = global_qtest;
+ guint64 timeout_us = 2 * 1000 * 1000;
+ gint64 start_time = g_get_monotonic_time();
+ uint32_t reg;
+
+ for (;;) {
+ qtest_clock_step(qts, 100);
+
+ reg = riscv_iommu_read_reg32(r_iommu, queue_csr);
+ if (reg & RISCV_IOMMU_QUEUE_ACTIVE) {
+ break;
+ }
+ g_assert(g_get_monotonic_time() - start_time <= timeout_us);
+ }
+}
+
+/*
+ * Goes through the queue activation procedures of chapter 6.2,
+ * "Guidelines for initialization", of the RISCV-IOMMU spec.
+ */
+static void test_iommu_init_queues(void *obj, void *data,
+ QGuestAllocator *t_alloc)
+{
+ QRISCVIOMMU *r_iommu = obj;
+ uint64_t reg64, q_addr;
+ uint32_t reg;
+ int k;
+
+ reg64 = riscv_iommu_read_reg64(r_iommu, RISCV_IOMMU_REG_CAP);
+ g_assert_cmpuint(reg64 & RISCV_IOMMU_CAP_VERSION, ==, 0x10);
+
+ /*
+ * Program the command queue. Write 0xF to civ, assert that
+ * we have 4 writable bits (k = 4). The amount of entries N in the
+ * command queue is 2^4 = 16. We need to alloc a N*16 bytes
+ * buffer and use it to set cqb.
+ */
+ riscv_iommu_write_reg32(r_iommu, RISCV_IOMMU_REG_IVEC,
+ 0xFFFF & RISCV_IOMMU_REG_IVEC_CIV);
+ reg = riscv_iommu_read_reg32(r_iommu, RISCV_IOMMU_REG_IVEC);
+ g_assert_cmpuint(reg & RISCV_IOMMU_REG_IVEC_CIV, ==, 0xF);
+
+ q_addr = guest_alloc(t_alloc, 16 * 16);
+ reg64 = 0;
+ k = 4;
+ deposit64(reg64, RISCV_IOMMU_CQB_PPN_START,
+ RISCV_IOMMU_CQB_PPN_LEN, q_addr);
+ deposit64(reg64, RISCV_IOMMU_CQB_LOG2SZ_START,
+ RISCV_IOMMU_CQB_LOG2SZ_LEN, k - 1);
+ riscv_iommu_write_reg64(r_iommu, RISCV_IOMMU_REG_CQB, reg64);
+
+ /* cqt = 0, cqcsr.cqen = 1, poll cqcsr.cqon until it reads 1 */
+ riscv_iommu_write_reg32(r_iommu, RISCV_IOMMU_REG_CQT, 0);
+
+ reg = riscv_iommu_read_reg32(r_iommu, RISCV_IOMMU_REG_CQCSR);
+ reg |= RISCV_IOMMU_CQCSR_CQEN;
+ riscv_iommu_write_reg32(r_iommu, RISCV_IOMMU_REG_CQCSR, reg);
+
+ qtest_wait_for_queue_active(r_iommu, RISCV_IOMMU_REG_CQCSR);
+
+ /*
+ * Program the fault queue. Similar to the above:
+ * - Write 0xF to fiv, assert that we have 4 writable bits (k = 4)
+ * - Alloc a 16*32 bytes (instead of 16*16) buffer and use it to set
+ * fqb
+ */
+ riscv_iommu_write_reg32(r_iommu, RISCV_IOMMU_REG_IVEC,
+ 0xFFFF & RISCV_IOMMU_REG_IVEC_FIV);
+ reg = riscv_iommu_read_reg32(r_iommu, RISCV_IOMMU_REG_IVEC);
+ g_assert_cmpuint(reg & RISCV_IOMMU_REG_IVEC_FIV, ==, 0xF0);
+
+ q_addr = guest_alloc(t_alloc, 16 * 32);
+ reg64 = 0;
+ k = 4;
+ deposit64(reg64, RISCV_IOMMU_FQB_PPN_START,
+ RISCV_IOMMU_FQB_PPN_LEN, q_addr);
+ deposit64(reg64, RISCV_IOMMU_FQB_LOG2SZ_START,
+ RISCV_IOMMU_FQB_LOG2SZ_LEN, k - 1);
+ riscv_iommu_write_reg64(r_iommu, RISCV_IOMMU_REG_FQB, reg64);
+
+ /* fqt = 0, fqcsr.fqen = 1, poll fqcsr.fqon until it reads 1 */
+ riscv_iommu_write_reg32(r_iommu, RISCV_IOMMU_REG_FQT, 0);
+
+ reg = riscv_iommu_read_reg32(r_iommu, RISCV_IOMMU_REG_FQCSR);
+ reg |= RISCV_IOMMU_FQCSR_FQEN;
+ riscv_iommu_write_reg32(r_iommu, RISCV_IOMMU_REG_FQCSR, reg);
+
+ qtest_wait_for_queue_active(r_iommu, RISCV_IOMMU_REG_FQCSR);
+
+ /*
+ * Program the page-request queue:
+ - Write 0xF to piv, assert that we have 4 writable bits (k = 4)
+ - Alloc a 16*16 bytes buffer and use it to set pqb.
+ */
+ riscv_iommu_write_reg32(r_iommu, RISCV_IOMMU_REG_IVEC,
+ 0xFFFF & RISCV_IOMMU_REG_IVEC_PIV);
+ reg = riscv_iommu_read_reg32(r_iommu, RISCV_IOMMU_REG_IVEC);
+ g_assert_cmpuint(reg & RISCV_IOMMU_REG_IVEC_PIV, ==, 0xF000);
+
+ q_addr = guest_alloc(t_alloc, 16 * 16);
+ reg64 = 0;
+ k = 4;
+ deposit64(reg64, RISCV_IOMMU_PQB_PPN_START,
+ RISCV_IOMMU_PQB_PPN_LEN, q_addr);
+ deposit64(reg64, RISCV_IOMMU_PQB_LOG2SZ_START,
+ RISCV_IOMMU_PQB_LOG2SZ_LEN, k - 1);
+ riscv_iommu_write_reg64(r_iommu, RISCV_IOMMU_REG_PQB, reg64);
+
+ /* pqt = 0, pqcsr.pqen = 1, poll pqcsr.pqon until it reads 1 */
+ riscv_iommu_write_reg32(r_iommu, RISCV_IOMMU_REG_PQT, 0);
+
+ reg = riscv_iommu_read_reg32(r_iommu, RISCV_IOMMU_REG_PQCSR);
+ reg |= RISCV_IOMMU_PQCSR_PQEN;
+ riscv_iommu_write_reg32(r_iommu, RISCV_IOMMU_REG_PQCSR, reg);
+
+ qtest_wait_for_queue_active(r_iommu, RISCV_IOMMU_REG_PQCSR);
+}
+
static void register_riscv_iommu_test(void)
{
qos_add_test("pci_config", "riscv-iommu-pci", test_pci_config, NULL);
qos_add_test("reg_reset", "riscv-iommu-pci", test_reg_reset, NULL);
+ qos_add_test("iommu_init_queues", "riscv-iommu-pci",
+ test_iommu_init_queues, NULL);
}
libqos_init(register_riscv_iommu_test);
--
2.45.2