From: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
RV32 OpenSBI need a fw_dynamic_info parameter with 32-bit fields instead
of target_ulong.
In RV64 QEMU, target_ulong is 64. So it is not right for booting RV32 OpenSBI.
We create a fw_dynmaic_info32 struct for this purpose.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/riscv/boot.c | 35 ++++++++++++++++++++++-----------
hw/riscv/sifive_u.c | 3 ++-
include/hw/riscv/boot.h | 4 +++-
include/hw/riscv/boot_opensbi.h | 29 +++++++++++++++++++++++++++
4 files changed, 57 insertions(+), 14 deletions(-)
diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index 47281ca853..1a2c1ff9e0 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -342,27 +342,33 @@ void riscv_load_fdt(hwaddr fdt_addr, void *fdt)
rom_ptr_for_as(&address_space_memory, fdt_addr, fdtsize));
}
-void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
- hwaddr rom_size, uint32_t reset_vec_size,
+void riscv_rom_copy_firmware_info(MachineState *machine,
+ RISCVHartArrayState *harts,
+ hwaddr rom_base, hwaddr rom_size,
+ uint32_t reset_vec_size,
uint64_t kernel_entry)
{
+ struct fw_dynamic_info32 dinfo32;
struct fw_dynamic_info dinfo;
size_t dinfo_len;
- if (sizeof(dinfo.magic) == 4) {
- dinfo.magic = cpu_to_le32(FW_DYNAMIC_INFO_MAGIC_VALUE);
- dinfo.version = cpu_to_le32(FW_DYNAMIC_INFO_VERSION);
- dinfo.next_mode = cpu_to_le32(FW_DYNAMIC_INFO_NEXT_MODE_S);
- dinfo.next_addr = cpu_to_le32(kernel_entry);
+ if (riscv_is_32bit(harts)) {
+ dinfo32.magic = cpu_to_le32(FW_DYNAMIC_INFO_MAGIC_VALUE);
+ dinfo32.version = cpu_to_le32(FW_DYNAMIC_INFO_VERSION);
+ dinfo32.next_mode = cpu_to_le32(FW_DYNAMIC_INFO_NEXT_MODE_S);
+ dinfo32.next_addr = cpu_to_le32(kernel_entry);
+ dinfo32.options = 0;
+ dinfo32.boot_hart = 0;
+ dinfo_len = sizeof(dinfo32);
} else {
dinfo.magic = cpu_to_le64(FW_DYNAMIC_INFO_MAGIC_VALUE);
dinfo.version = cpu_to_le64(FW_DYNAMIC_INFO_VERSION);
dinfo.next_mode = cpu_to_le64(FW_DYNAMIC_INFO_NEXT_MODE_S);
dinfo.next_addr = cpu_to_le64(kernel_entry);
+ dinfo.options = 0;
+ dinfo.boot_hart = 0;
+ dinfo_len = sizeof(dinfo);
}
- dinfo.options = 0;
- dinfo.boot_hart = 0;
- dinfo_len = sizeof(dinfo);
/**
* copy the dynamic firmware info. This information is specific to
@@ -374,7 +380,10 @@ void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
exit(1);
}
- rom_add_blob_fixed_as("mrom.finfo", &dinfo, dinfo_len,
+ rom_add_blob_fixed_as("mrom.finfo",
+ riscv_is_32bit(harts) ?
+ (void *)&dinfo32 : (void *)&dinfo,
+ dinfo_len,
rom_base + reset_vec_size,
&address_space_memory);
}
@@ -430,7 +439,9 @@ void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts
}
rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
rom_base, &address_space_memory);
- riscv_rom_copy_firmware_info(machine, rom_base, rom_size, sizeof(reset_vec),
+ riscv_rom_copy_firmware_info(machine, harts,
+ rom_base, rom_size,
+ sizeof(reset_vec),
kernel_entry);
}
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index af5f923f54..5010c3eadb 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -646,7 +646,8 @@ static void sifive_u_machine_init(MachineState *machine)
rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
memmap[SIFIVE_U_DEV_MROM].base, &address_space_memory);
- riscv_rom_copy_firmware_info(machine, memmap[SIFIVE_U_DEV_MROM].base,
+ riscv_rom_copy_firmware_info(machine, &s->soc.u_cpus,
+ memmap[SIFIVE_U_DEV_MROM].base,
memmap[SIFIVE_U_DEV_MROM].size,
sizeof(reset_vec), kernel_entry);
diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index a2e4ae9cb0..806256d23f 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -56,7 +56,9 @@ void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts
hwaddr rom_base, hwaddr rom_size,
uint64_t kernel_entry,
uint64_t fdt_load_addr);
-void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
+void riscv_rom_copy_firmware_info(MachineState *machine,
+ RISCVHartArrayState *harts,
+ hwaddr rom_base,
hwaddr rom_size,
uint32_t reset_vec_size,
uint64_t kernel_entry);
diff --git a/include/hw/riscv/boot_opensbi.h b/include/hw/riscv/boot_opensbi.h
index 1b749663dc..18664a174b 100644
--- a/include/hw/riscv/boot_opensbi.h
+++ b/include/hw/riscv/boot_opensbi.h
@@ -58,4 +58,33 @@ struct fw_dynamic_info {
target_long boot_hart;
};
+/** Representation dynamic info passed by previous booting stage */
+struct fw_dynamic_info32 {
+ /** Info magic */
+ int32_t magic;
+ /** Info version */
+ int32_t version;
+ /** Next booting stage address */
+ int32_t next_addr;
+ /** Next booting stage mode */
+ int32_t next_mode;
+ /** Options for OpenSBI library */
+ int32_t options;
+ /**
+ * Preferred boot HART id
+ *
+ * It is possible that the previous booting stage uses same link
+ * address as the FW_DYNAMIC firmware. In this case, the relocation
+ * lottery mechanism can potentially overwrite the previous booting
+ * stage while other HARTs are still running in the previous booting
+ * stage leading to boot-time crash. To avoid this boot-time crash,
+ * the previous booting stage can specify last HART that will jump
+ * to the FW_DYNAMIC firmware as the preferred boot HART.
+ *
+ * To avoid specifying a preferred boot HART, the previous booting
+ * stage can set it to -1UL which will force the FW_DYNAMIC firmware
+ * to use the relocation lottery mechanism.
+ */
+ int32_t boot_hart;
+};
#endif
--
2.25.1