SPI controller device model supports a connection to a single SPI responder.
This provide access to SPI seeproms, TPM, flash device and an ADC controller.
All SPI function control is mapped into the SPI register space to enable full
control by firmware. In this commit SPI configuration component is modelled
which contains all SPI configuration and status registers as well as the hold
registers for data to be sent or having been received.
An existing QEMU SSI framework is used and SSI_BUS is created.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
---
include/hw/ppc/pnv_xscom.h | 3 +
include/hw/ssi/pnv_spi.h | 40 +++++++
include/hw/ssi/pnv_spi_regs.h | 67 +++++++++++
hw/ssi/pnv_spi.c | 214 ++++++++++++++++++++++++++++++++++
hw/ppc/Kconfig | 3 +
hw/ssi/Kconfig | 4 +
hw/ssi/meson.build | 1 +
hw/ssi/trace-events | 6 +
8 files changed, 338 insertions(+)
create mode 100644 include/hw/ssi/pnv_spi.h
create mode 100644 include/hw/ssi/pnv_spi_regs.h
create mode 100644 hw/ssi/pnv_spi.c
diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h
index c8dd42bffd..0020dd172f 100644
--- a/include/hw/ppc/pnv_xscom.h
+++ b/include/hw/ppc/pnv_xscom.h
@@ -194,6 +194,9 @@ struct PnvXScomInterfaceClass {
#define PNV10_XSCOM_PEC_PCI_BASE 0x8010800 /* index goes upwards ... */
#define PNV10_XSCOM_PEC_PCI_SIZE 0x200
+#define PNV10_XSCOM_PIB_SPIC_BASE 0xc0000
+#define PNV10_XSCOM_PIB_SPIC_SIZE 0x20
+
void pnv_xscom_init(PnvChip *chip, uint64_t size, hwaddr addr);
int pnv_dt_xscom(PnvChip *chip, void *fdt, int root_offset,
uint64_t xscom_base, uint64_t xscom_size,
diff --git a/include/hw/ssi/pnv_spi.h b/include/hw/ssi/pnv_spi.h
new file mode 100644
index 0000000000..833042b74b
--- /dev/null
+++ b/include/hw/ssi/pnv_spi.h
@@ -0,0 +1,40 @@
+/*
+ * QEMU PowerPC SPI model
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This model Supports a connection to a single SPI responder.
+ * Introduced for P10 to provide access to SPI seeproms, TPM, flash device
+ * and an ADC controller.
+ */
+
+#ifndef PPC_PNV_SPI_H
+#define PPC_PNV_SPI_H
+
+#include "hw/ssi/ssi.h"
+#include "hw/sysbus.h"
+
+#define TYPE_PNV_SPI "pnv-spi"
+OBJECT_DECLARE_SIMPLE_TYPE(PnvSpi, PNV_SPI)
+
+#define PNV_SPI_REG_SIZE 8
+#define PNV_SPI_REGS 7
+
+#define TYPE_PNV_SPI_BUS "pnv-spi-bus"
+typedef struct PnvSpi {
+ SysBusDevice parent_obj;
+
+ SSIBus *ssi_bus;
+ qemu_irq *cs_line;
+ MemoryRegion xscom_spic_regs;
+ /* SPI object number */
+ uint32_t spic_num;
+
+ /* SPI registers */
+ uint64_t regs[PNV_SPI_REGS];
+ uint8_t seq_op[PNV_SPI_REG_SIZE];
+ uint64_t status;
+} PnvSpi;
+#endif /* PPC_PNV_SPI_H */
diff --git a/include/hw/ssi/pnv_spi_regs.h b/include/hw/ssi/pnv_spi_regs.h
new file mode 100644
index 0000000000..5b6ff72d02
--- /dev/null
+++ b/include/hw/ssi/pnv_spi_regs.h
@@ -0,0 +1,67 @@
+/*
+ * QEMU PowerPC SPI model
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef PNV_SPI_CONTROLLER_REGS_H
+#define PNV_SPI_CONTROLLER_REGS_H
+
+/*
+ * Macros from target/ppc/cpu.h
+ * These macros are copied from ppc target specific file target/ppc/cpu.h
+ * as target/ppc/cpu.h cannot be included here.
+ */
+#define PPC_BIT(bit) (0x8000000000000000ULL >> (bit))
+#define PPC_BIT8(bit) (0x80 >> (bit))
+#define PPC_BITMASK(bs, be) ((PPC_BIT(bs) - PPC_BIT(be)) | PPC_BIT(bs))
+#define PPC_BITMASK8(bs, be) ((PPC_BIT8(bs) - PPC_BIT8(be)) | PPC_BIT8(bs))
+#define MASK_TO_LSH(m) (__builtin_ffsll(m) - 1)
+#define GETFIELD(m, v) (((v) & (m)) >> MASK_TO_LSH(m))
+#define SETFIELD(m, v, val) \
+ (((v) & ~(m)) | ((((typeof(v))(val)) << MASK_TO_LSH(m)) & (m)))
+
+/* Error Register */
+#define ERROR_REG 0x00
+
+/* counter_config_reg */
+#define SPI_CTR_CFG_REG 0x01
+
+/* config_reg */
+#define CONFIG_REG1 0x02
+
+/* clock_config_reset_control_ecc_enable_reg */
+#define SPI_CLK_CFG_REG 0x03
+#define SPI_CLK_CFG_HARD_RST 0x0084000000000000;
+#define SPI_CLK_CFG_RST_CTRL PPC_BITMASK(24, 27)
+
+/* memory_mapping_reg */
+#define SPI_MM_REG 0x04
+
+/* transmit_data_reg */
+#define SPI_XMIT_DATA_REG 0x05
+
+/* receive_data_reg */
+#define SPI_RCV_DATA_REG 0x06
+
+/* sequencer_operation_reg */
+#define SPI_SEQ_OP_REG 0x07
+
+/* status_reg */
+#define SPI_STS_REG 0x08
+#define SPI_STS_RDR_FULL PPC_BIT(0)
+#define SPI_STS_RDR_OVERRUN PPC_BIT(1)
+#define SPI_STS_RDR_UNDERRUN PPC_BIT(2)
+#define SPI_STS_TDR_FULL PPC_BIT(4)
+#define SPI_STS_TDR_OVERRUN PPC_BIT(5)
+#define SPI_STS_TDR_UNDERRUN PPC_BIT(6)
+#define SPI_STS_SEQ_FSM PPC_BITMASK(8, 15)
+#define SPI_STS_SHIFTER_FSM PPC_BITMASK(16, 27)
+#define SPI_STS_SEQ_INDEX PPC_BITMASK(28, 31)
+#define SPI_STS_GEN_STATUS PPC_BITMASK(32, 63)
+#define SPI_STS_RDR PPC_BITMASK(1, 3)
+#define SPI_STS_TDR PPC_BITMASK(5, 7)
+
+#endif
diff --git a/hw/ssi/pnv_spi.c b/hw/ssi/pnv_spi.c
new file mode 100644
index 0000000000..de3ffc4e56
--- /dev/null
+++ b/hw/ssi/pnv_spi.c
@@ -0,0 +1,214 @@
+/*
+ * QEMU PowerPC SPI model
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/ppc/pnv_xscom.h"
+#include "hw/ssi/pnv_spi.h"
+#include "hw/ssi/pnv_spi_regs.h"
+#include "hw/ssi/ssi.h"
+#include <libfdt.h>
+#include "hw/irq.h"
+#include "trace.h"
+
+/*
+ * Macro from include/hw/ppc/fdt.h
+ * fdt.h cannot be included here as it contain ppc target specific dependency.
+ */
+#define _FDT(exp) \
+ do { \
+ int _ret = (exp); \
+ if (_ret < 0) { \
+ error_report("error creating device tree: %s: %s", \
+ #exp, fdt_strerror(_ret)); \
+ exit(1); \
+ } \
+ } while (0)
+
+static uint64_t pnv_spi_xscom_read(void *opaque, hwaddr addr, unsigned size)
+{
+ PnvSpi *s = PNV_SPI(opaque);
+ uint32_t reg = addr >> 3;
+ uint64_t val = ~0ull;
+
+ switch (reg) {
+ case ERROR_REG:
+ case SPI_CTR_CFG_REG:
+ case CONFIG_REG1:
+ case SPI_CLK_CFG_REG:
+ case SPI_MM_REG:
+ case SPI_XMIT_DATA_REG:
+ val = s->regs[reg];
+ break;
+ case SPI_RCV_DATA_REG:
+ val = s->regs[reg];
+ trace_pnv_spi_read_RDR(val);
+ s->status = SETFIELD(SPI_STS_RDR_FULL, s->status, 0);
+ break;
+ case SPI_SEQ_OP_REG:
+ val = 0;
+ for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
+ val = (val << 8) | s->seq_op[i];
+ }
+ break;
+ case SPI_STS_REG:
+ val = s->status;
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom "
+ "read at 0x%" PRIx32 "\n", reg);
+ }
+
+ trace_pnv_spi_read(addr, val);
+ return val;
+}
+
+static void pnv_spi_xscom_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ PnvSpi *s = PNV_SPI(opaque);
+ uint32_t reg = addr >> 3;
+
+ trace_pnv_spi_write(addr, val);
+
+ switch (reg) {
+ case ERROR_REG:
+ case SPI_CTR_CFG_REG:
+ case CONFIG_REG1:
+ case SPI_MM_REG:
+ case SPI_RCV_DATA_REG:
+ s->regs[reg] = val;
+ break;
+ case SPI_CLK_CFG_REG:
+ /*
+ * To reset the SPI controller write the sequence 0x5 0xA to
+ * reset_control field
+ */
+ if ((GETFIELD(SPI_CLK_CFG_RST_CTRL, s->regs[SPI_CLK_CFG_REG]) == 0x5)
+ && (GETFIELD(SPI_CLK_CFG_RST_CTRL, val) == 0xA)) {
+ /* SPI controller reset sequence completed, resetting */
+ s->regs[reg] = SPI_CLK_CFG_HARD_RST;
+ } else {
+ s->regs[reg] = val;
+ }
+ break;
+ case SPI_XMIT_DATA_REG:
+ /*
+ * Writing to the transmit data register causes the transmit data
+ * register full status bit in the status register to be set. Writing
+ * when the transmit data register full status bit is already set
+ * causes a "Resource Not Available" condition. This is not possible
+ * in the model since writes to this register are not asynchronous to
+ * the operation sequence like it would be in hardware.
+ */
+ s->regs[reg] = val;
+ trace_pnv_spi_write_TDR(val);
+ s->status = SETFIELD(SPI_STS_TDR_FULL, s->status, 1);
+ s->status = SETFIELD(SPI_STS_TDR_UNDERRUN, s->status, 0);
+ break;
+ case SPI_SEQ_OP_REG:
+ for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
+ s->seq_op[i] = (val >> (56 - i * 8)) & 0xFF;
+ }
+ break;
+ case SPI_STS_REG:
+ /* other fields are ignore_write */
+ s->status = SETFIELD(SPI_STS_RDR_OVERRUN, s->status,
+ GETFIELD(SPI_STS_RDR, val));
+ s->status = SETFIELD(SPI_STS_TDR_OVERRUN, s->status,
+ GETFIELD(SPI_STS_TDR, val));
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom "
+ "write at 0x%" PRIx32 "\n", reg);
+ }
+ return;
+}
+
+static const MemoryRegionOps pnv_spi_xscom_ops = {
+ .read = pnv_spi_xscom_read,
+ .write = pnv_spi_xscom_write,
+ .valid.min_access_size = 8,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 8,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static Property pnv_spi_properties[] = {
+ DEFINE_PROP_UINT32("spic_num", PnvSpi, spic_num, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void pnv_spi_realize(DeviceState *dev, Error **errp)
+{
+ PnvSpi *s = PNV_SPI(dev);
+ g_autofree char *name = g_strdup_printf(TYPE_PNV_SPI_BUS ".%d",
+ s->spic_num);
+ s->ssi_bus = ssi_create_bus(dev, name);
+ s->cs_line = g_new0(qemu_irq, 1);
+ qdev_init_gpio_out_named(DEVICE(s), s->cs_line, "cs", 1);
+
+ /* spi scoms */
+ pnv_xscom_region_init(&s->xscom_spic_regs, OBJECT(s), &pnv_spi_xscom_ops,
+ s, "xscom-spi", PNV10_XSCOM_PIB_SPIC_SIZE);
+}
+
+static int pnv_spi_dt_xscom(PnvXScomInterface *dev, void *fdt,
+ int offset)
+{
+ PnvSpi *s = PNV_SPI(dev);
+ g_autofree char *name;
+ int s_offset;
+ const char compat[] = "ibm,power10-spi";
+ uint32_t spic_pcba = PNV10_XSCOM_PIB_SPIC_BASE +
+ s->spic_num * PNV10_XSCOM_PIB_SPIC_SIZE;
+ uint32_t reg[] = {
+ cpu_to_be32(spic_pcba),
+ cpu_to_be32(PNV10_XSCOM_PIB_SPIC_SIZE)
+ };
+ name = g_strdup_printf("pnv_spi@%x", spic_pcba);
+ s_offset = fdt_add_subnode(fdt, offset, name);
+ _FDT(s_offset);
+
+ _FDT(fdt_setprop(fdt, s_offset, "reg", reg, sizeof(reg)));
+ _FDT(fdt_setprop(fdt, s_offset, "compatible", compat, sizeof(compat)));
+ _FDT((fdt_setprop_cell(fdt, s_offset, "spic_num#", s->spic_num)));
+ return 0;
+}
+
+static void pnv_spi_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PnvXScomInterfaceClass *xscomc = PNV_XSCOM_INTERFACE_CLASS(klass);
+
+ xscomc->dt_xscom = pnv_spi_dt_xscom;
+
+ dc->desc = "PowerNV SPI";
+ dc->realize = pnv_spi_realize;
+ device_class_set_props(dc, pnv_spi_properties);
+}
+
+static const TypeInfo pnv_spi_info = {
+ .name = TYPE_PNV_SPI,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(PnvSpi),
+ .class_init = pnv_spi_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { TYPE_PNV_XSCOM_INTERFACE },
+ { }
+ }
+};
+
+static void pnv_spi_register_types(void)
+{
+ type_register_static(&pnv_spi_info);
+}
+
+type_init(pnv_spi_register_types);
diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
index 78f83e78ce..4668d59eab 100644
--- a/hw/ppc/Kconfig
+++ b/hw/ppc/Kconfig
@@ -39,6 +39,9 @@ config POWERNV
select PCI_POWERNV
select PCA9552
select PCA9554
+ select SSI
+ select SSI_M25P80
+ select PNV_SPI
config PPC405
bool
diff --git a/hw/ssi/Kconfig b/hw/ssi/Kconfig
index 83ee53c1d0..8d180de7cf 100644
--- a/hw/ssi/Kconfig
+++ b/hw/ssi/Kconfig
@@ -24,3 +24,7 @@ config STM32F2XX_SPI
config BCM2835_SPI
bool
select SSI
+
+config PNV_SPI
+ bool
+ select SSI
diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build
index b999aeb027..b7ad7fca3b 100644
--- a/hw/ssi/meson.build
+++ b/hw/ssi/meson.build
@@ -12,3 +12,4 @@ system_ss.add(when: 'CONFIG_IMX', if_true: files('imx_spi.c'))
system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_spi.c'))
system_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_spi_host.c'))
system_ss.add(when: 'CONFIG_BCM2835_SPI', if_true: files('bcm2835_spi.c'))
+system_ss.add(when: 'CONFIG_PNV_SPI', if_true: files('pnv_spi.c'))
diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events
index 2d5bd2b83d..4388024a05 100644
--- a/hw/ssi/trace-events
+++ b/hw/ssi/trace-events
@@ -32,3 +32,9 @@ ibex_spi_host_reset(const char *msg) "%s"
ibex_spi_host_transfer(uint32_t tx_data, uint32_t rx_data) "tx_data: 0x%" PRIx32 " rx_data: @0x%" PRIx32
ibex_spi_host_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64
ibex_spi_host_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size %u:"
+
+#pnv_spi.c
+pnv_spi_read(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_spi_write(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_spi_read_RDR(uint64_t val) "data extracted = 0x%" PRIx64
+pnv_spi_write_TDR(uint64_t val) "being written, data written = 0x%" PRIx64
--
2.39.3Thanks!
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Glenn
On Wed, 2024-06-26 at 04:05 -0500, Chalapathi V wrote:
> SPI controller device model supports a connection to a single SPI
> responder.
> This provide access to SPI seeproms, TPM, flash device and an ADC
> controller.
>
> All SPI function control is mapped into the SPI register space to
> enable full
> control by firmware. In this commit SPI configuration component is
> modelled
> which contains all SPI configuration and status registers as well as
> the hold
> registers for data to be sent or having been received.
>
> An existing QEMU SSI framework is used and SSI_BUS is created.
>
> Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
> ---
> include/hw/ppc/pnv_xscom.h | 3 +
> include/hw/ssi/pnv_spi.h | 40 +++++++
> include/hw/ssi/pnv_spi_regs.h | 67 +++++++++++
> hw/ssi/pnv_spi.c | 214
> ++++++++++++++++++++++++++++++++++
> hw/ppc/Kconfig | 3 +
> hw/ssi/Kconfig | 4 +
> hw/ssi/meson.build | 1 +
> hw/ssi/trace-events | 6 +
> 8 files changed, 338 insertions(+)
> create mode 100644 include/hw/ssi/pnv_spi.h
> create mode 100644 include/hw/ssi/pnv_spi_regs.h
> create mode 100644 hw/ssi/pnv_spi.c
>
> diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h
> index c8dd42bffd..0020dd172f 100644
> --- a/include/hw/ppc/pnv_xscom.h
> +++ b/include/hw/ppc/pnv_xscom.h
> @@ -194,6 +194,9 @@ struct PnvXScomInterfaceClass {
> #define PNV10_XSCOM_PEC_PCI_BASE 0x8010800 /* index goes upwards
> ... */
> #define PNV10_XSCOM_PEC_PCI_SIZE 0x200
>
> +#define PNV10_XSCOM_PIB_SPIC_BASE 0xc0000
> +#define PNV10_XSCOM_PIB_SPIC_SIZE 0x20
> +
> void pnv_xscom_init(PnvChip *chip, uint64_t size, hwaddr addr);
> int pnv_dt_xscom(PnvChip *chip, void *fdt, int root_offset,
> uint64_t xscom_base, uint64_t xscom_size,
> diff --git a/include/hw/ssi/pnv_spi.h b/include/hw/ssi/pnv_spi.h
> new file mode 100644
> index 0000000000..833042b74b
> --- /dev/null
> +++ b/include/hw/ssi/pnv_spi.h
> @@ -0,0 +1,40 @@
> +/*
> + * QEMU PowerPC SPI model
> + *
> + * Copyright (c) 2024, IBM Corporation.
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + *
> + * This model Supports a connection to a single SPI responder.
> + * Introduced for P10 to provide access to SPI seeproms, TPM, flash
> device
> + * and an ADC controller.
> + */
> +
> +#ifndef PPC_PNV_SPI_H
> +#define PPC_PNV_SPI_H
> +
> +#include "hw/ssi/ssi.h"
> +#include "hw/sysbus.h"
> +
> +#define TYPE_PNV_SPI "pnv-spi"
> +OBJECT_DECLARE_SIMPLE_TYPE(PnvSpi, PNV_SPI)
> +
> +#define PNV_SPI_REG_SIZE 8
> +#define PNV_SPI_REGS 7
> +
> +#define TYPE_PNV_SPI_BUS "pnv-spi-bus"
> +typedef struct PnvSpi {
> + SysBusDevice parent_obj;
> +
> + SSIBus *ssi_bus;
> + qemu_irq *cs_line;
> + MemoryRegion xscom_spic_regs;
> + /* SPI object number */
> + uint32_t spic_num;
> +
> + /* SPI registers */
> + uint64_t regs[PNV_SPI_REGS];
> + uint8_t seq_op[PNV_SPI_REG_SIZE];
> + uint64_t status;
> +} PnvSpi;
> +#endif /* PPC_PNV_SPI_H */
> diff --git a/include/hw/ssi/pnv_spi_regs.h
> b/include/hw/ssi/pnv_spi_regs.h
> new file mode 100644
> index 0000000000..5b6ff72d02
> --- /dev/null
> +++ b/include/hw/ssi/pnv_spi_regs.h
> @@ -0,0 +1,67 @@
> +/*
> + * QEMU PowerPC SPI model
> + *
> + * Copyright (c) 2024, IBM Corporation.
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#ifndef PNV_SPI_CONTROLLER_REGS_H
> +#define PNV_SPI_CONTROLLER_REGS_H
> +
> +/*
> + * Macros from target/ppc/cpu.h
> + * These macros are copied from ppc target specific file
> target/ppc/cpu.h
> + * as target/ppc/cpu.h cannot be included here.
> + */
> +#define PPC_BIT(bit) (0x8000000000000000ULL >> (bit))
> +#define PPC_BIT8(bit) (0x80 >> (bit))
> +#define PPC_BITMASK(bs, be) ((PPC_BIT(bs) - PPC_BIT(be)) |
> PPC_BIT(bs))
> +#define PPC_BITMASK8(bs, be) ((PPC_BIT8(bs) - PPC_BIT8(be)) |
> PPC_BIT8(bs))
> +#define MASK_TO_LSH(m) (__builtin_ffsll(m) - 1)
> +#define GETFIELD(m, v) (((v) & (m)) >> MASK_TO_LSH(m))
> +#define SETFIELD(m, v, val) \
> + (((v) & ~(m)) | ((((typeof(v))(val)) << MASK_TO_LSH(m)) &
> (m)))
> +
> +/* Error Register */
> +#define ERROR_REG 0x00
> +
> +/* counter_config_reg */
> +#define SPI_CTR_CFG_REG 0x01
> +
> +/* config_reg */
> +#define CONFIG_REG1 0x02
> +
> +/* clock_config_reset_control_ecc_enable_reg */
> +#define SPI_CLK_CFG_REG 0x03
> +#define SPI_CLK_CFG_HARD_RST 0x0084000000000000;
> +#define SPI_CLK_CFG_RST_CTRL PPC_BITMASK(24, 27)
> +
> +/* memory_mapping_reg */
> +#define SPI_MM_REG 0x04
> +
> +/* transmit_data_reg */
> +#define SPI_XMIT_DATA_REG 0x05
> +
> +/* receive_data_reg */
> +#define SPI_RCV_DATA_REG 0x06
> +
> +/* sequencer_operation_reg */
> +#define SPI_SEQ_OP_REG 0x07
> +
> +/* status_reg */
> +#define SPI_STS_REG 0x08
> +#define SPI_STS_RDR_FULL PPC_BIT(0)
> +#define SPI_STS_RDR_OVERRUN PPC_BIT(1)
> +#define SPI_STS_RDR_UNDERRUN PPC_BIT(2)
> +#define SPI_STS_TDR_FULL PPC_BIT(4)
> +#define SPI_STS_TDR_OVERRUN PPC_BIT(5)
> +#define SPI_STS_TDR_UNDERRUN PPC_BIT(6)
> +#define SPI_STS_SEQ_FSM PPC_BITMASK(8, 15)
> +#define SPI_STS_SHIFTER_FSM PPC_BITMASK(16, 27)
> +#define SPI_STS_SEQ_INDEX PPC_BITMASK(28, 31)
> +#define SPI_STS_GEN_STATUS PPC_BITMASK(32, 63)
> +#define SPI_STS_RDR PPC_BITMASK(1, 3)
> +#define SPI_STS_TDR PPC_BITMASK(5, 7)
> +
> +#endif
> diff --git a/hw/ssi/pnv_spi.c b/hw/ssi/pnv_spi.c
> new file mode 100644
> index 0000000000..de3ffc4e56
> --- /dev/null
> +++ b/hw/ssi/pnv_spi.c
> @@ -0,0 +1,214 @@
> +/*
> + * QEMU PowerPC SPI model
> + *
> + * Copyright (c) 2024, IBM Corporation.
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "hw/qdev-properties.h"
> +#include "hw/ppc/pnv_xscom.h"
> +#include "hw/ssi/pnv_spi.h"
> +#include "hw/ssi/pnv_spi_regs.h"
> +#include "hw/ssi/ssi.h"
> +#include <libfdt.h>
> +#include "hw/irq.h"
> +#include "trace.h"
> +
> +/*
> + * Macro from include/hw/ppc/fdt.h
> + * fdt.h cannot be included here as it contain ppc target specific
> dependency.
> + */
> +#define _FDT(exp) \
> + do { \
> + int _ret = (exp); \
> + if (_ret < 0) { \
> + error_report("error creating device tree: %s: %s", \
> + #exp, fdt_strerror(_ret)); \
> + exit(1); \
> + } \
> + } while (0)
> +
> +static uint64_t pnv_spi_xscom_read(void *opaque, hwaddr addr,
> unsigned size)
> +{
> + PnvSpi *s = PNV_SPI(opaque);
> + uint32_t reg = addr >> 3;
> + uint64_t val = ~0ull;
> +
> + switch (reg) {
> + case ERROR_REG:
> + case SPI_CTR_CFG_REG:
> + case CONFIG_REG1:
> + case SPI_CLK_CFG_REG:
> + case SPI_MM_REG:
> + case SPI_XMIT_DATA_REG:
> + val = s->regs[reg];
> + break;
> + case SPI_RCV_DATA_REG:
> + val = s->regs[reg];
> + trace_pnv_spi_read_RDR(val);
> + s->status = SETFIELD(SPI_STS_RDR_FULL, s->status, 0);
> + break;
> + case SPI_SEQ_OP_REG:
> + val = 0;
> + for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
> + val = (val << 8) | s->seq_op[i];
> + }
> + break;
> + case SPI_STS_REG:
> + val = s->status;
> + break;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom
> "
> + "read at 0x%" PRIx32 "\n", reg);
> + }
> +
> + trace_pnv_spi_read(addr, val);
> + return val;
> +}
> +
> +static void pnv_spi_xscom_write(void *opaque, hwaddr addr,
> + uint64_t val, unsigned size)
> +{
> + PnvSpi *s = PNV_SPI(opaque);
> + uint32_t reg = addr >> 3;
> +
> + trace_pnv_spi_write(addr, val);
> +
> + switch (reg) {
> + case ERROR_REG:
> + case SPI_CTR_CFG_REG:
> + case CONFIG_REG1:
> + case SPI_MM_REG:
> + case SPI_RCV_DATA_REG:
> + s->regs[reg] = val;
> + break;
> + case SPI_CLK_CFG_REG:
> + /*
> + * To reset the SPI controller write the sequence 0x5 0xA to
> + * reset_control field
> + */
> + if ((GETFIELD(SPI_CLK_CFG_RST_CTRL, s-
> >regs[SPI_CLK_CFG_REG]) == 0x5)
> + && (GETFIELD(SPI_CLK_CFG_RST_CTRL, val) == 0xA)) {
> + /* SPI controller reset sequence completed,
> resetting */
> + s->regs[reg] = SPI_CLK_CFG_HARD_RST;
> + } else {
> + s->regs[reg] = val;
> + }
> + break;
> + case SPI_XMIT_DATA_REG:
> + /*
> + * Writing to the transmit data register causes the transmit
> data
> + * register full status bit in the status register to be
> set. Writing
> + * when the transmit data register full status bit is
> already set
> + * causes a "Resource Not Available" condition. This is not
> possible
> + * in the model since writes to this register are not
> asynchronous to
> + * the operation sequence like it would be in hardware.
> + */
> + s->regs[reg] = val;
> + trace_pnv_spi_write_TDR(val);
> + s->status = SETFIELD(SPI_STS_TDR_FULL, s->status, 1);
> + s->status = SETFIELD(SPI_STS_TDR_UNDERRUN, s->status, 0);
> + break;
> + case SPI_SEQ_OP_REG:
> + for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
> + s->seq_op[i] = (val >> (56 - i * 8)) & 0xFF;
> + }
> + break;
> + case SPI_STS_REG:
> + /* other fields are ignore_write */
> + s->status = SETFIELD(SPI_STS_RDR_OVERRUN, s->status,
> + GETFIELD(SPI_STS_RDR, val));
> + s->status = SETFIELD(SPI_STS_TDR_OVERRUN, s->status,
> + GETFIELD(SPI_STS_TDR, val));
> + break;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom
> "
> + "write at 0x%" PRIx32 "\n", reg);
> + }
> + return;
> +}
> +
> +static const MemoryRegionOps pnv_spi_xscom_ops = {
> + .read = pnv_spi_xscom_read,
> + .write = pnv_spi_xscom_write,
> + .valid.min_access_size = 8,
> + .valid.max_access_size = 8,
> + .impl.min_access_size = 8,
> + .impl.max_access_size = 8,
> + .endianness = DEVICE_BIG_ENDIAN,
> +};
> +
> +static Property pnv_spi_properties[] = {
> + DEFINE_PROP_UINT32("spic_num", PnvSpi, spic_num, 0),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void pnv_spi_realize(DeviceState *dev, Error **errp)
> +{
> + PnvSpi *s = PNV_SPI(dev);
> + g_autofree char *name = g_strdup_printf(TYPE_PNV_SPI_BUS ".%d",
> + s->spic_num);
> + s->ssi_bus = ssi_create_bus(dev, name);
> + s->cs_line = g_new0(qemu_irq, 1);
> + qdev_init_gpio_out_named(DEVICE(s), s->cs_line, "cs", 1);
> +
> + /* spi scoms */
> + pnv_xscom_region_init(&s->xscom_spic_regs, OBJECT(s),
> &pnv_spi_xscom_ops,
> + s, "xscom-spi",
> PNV10_XSCOM_PIB_SPIC_SIZE);
> +}
> +
> +static int pnv_spi_dt_xscom(PnvXScomInterface *dev, void *fdt,
> + int offset)
> +{
> + PnvSpi *s = PNV_SPI(dev);
> + g_autofree char *name;
> + int s_offset;
> + const char compat[] = "ibm,power10-spi";
> + uint32_t spic_pcba = PNV10_XSCOM_PIB_SPIC_BASE +
> + s->spic_num * PNV10_XSCOM_PIB_SPIC_SIZE;
> + uint32_t reg[] = {
> + cpu_to_be32(spic_pcba),
> + cpu_to_be32(PNV10_XSCOM_PIB_SPIC_SIZE)
> + };
> + name = g_strdup_printf("pnv_spi@%x", spic_pcba);
> + s_offset = fdt_add_subnode(fdt, offset, name);
> + _FDT(s_offset);
> +
> + _FDT(fdt_setprop(fdt, s_offset, "reg", reg, sizeof(reg)));
> + _FDT(fdt_setprop(fdt, s_offset, "compatible", compat,
> sizeof(compat)));
> + _FDT((fdt_setprop_cell(fdt, s_offset, "spic_num#", s-
> >spic_num)));
> + return 0;
> +}
> +
> +static void pnv_spi_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> + PnvXScomInterfaceClass *xscomc =
> PNV_XSCOM_INTERFACE_CLASS(klass);
> +
> + xscomc->dt_xscom = pnv_spi_dt_xscom;
> +
> + dc->desc = "PowerNV SPI";
> + dc->realize = pnv_spi_realize;
> + device_class_set_props(dc, pnv_spi_properties);
> +}
> +
> +static const TypeInfo pnv_spi_info = {
> + .name = TYPE_PNV_SPI,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(PnvSpi),
> + .class_init = pnv_spi_class_init,
> + .interfaces = (InterfaceInfo[]) {
> + { TYPE_PNV_XSCOM_INTERFACE },
> + { }
> + }
> +};
> +
> +static void pnv_spi_register_types(void)
> +{
> + type_register_static(&pnv_spi_info);
> +}
> +
> +type_init(pnv_spi_register_types);
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index 78f83e78ce..4668d59eab 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -39,6 +39,9 @@ config POWERNV
> select PCI_POWERNV
> select PCA9552
> select PCA9554
> + select SSI
> + select SSI_M25P80
> + select PNV_SPI
>
> config PPC405
> bool
> diff --git a/hw/ssi/Kconfig b/hw/ssi/Kconfig
> index 83ee53c1d0..8d180de7cf 100644
> --- a/hw/ssi/Kconfig
> +++ b/hw/ssi/Kconfig
> @@ -24,3 +24,7 @@ config STM32F2XX_SPI
> config BCM2835_SPI
> bool
> select SSI
> +
> +config PNV_SPI
> + bool
> + select SSI
> diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build
> index b999aeb027..b7ad7fca3b 100644
> --- a/hw/ssi/meson.build
> +++ b/hw/ssi/meson.build
> @@ -12,3 +12,4 @@ system_ss.add(when: 'CONFIG_IMX', if_true:
> files('imx_spi.c'))
> system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_spi.c'))
> system_ss.add(when: 'CONFIG_IBEX', if_true:
> files('ibex_spi_host.c'))
> system_ss.add(when: 'CONFIG_BCM2835_SPI', if_true:
> files('bcm2835_spi.c'))
> +system_ss.add(when: 'CONFIG_PNV_SPI', if_true: files('pnv_spi.c'))
> diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events
> index 2d5bd2b83d..4388024a05 100644
> --- a/hw/ssi/trace-events
> +++ b/hw/ssi/trace-events
> @@ -32,3 +32,9 @@ ibex_spi_host_reset(const char *msg) "%s"
> ibex_spi_host_transfer(uint32_t tx_data, uint32_t rx_data) "tx_data:
> 0x%" PRIx32 " rx_data: @0x%" PRIx32
> ibex_spi_host_write(uint64_t addr, uint32_t size, uint64_t data)
> "@0x%" PRIx64 " size %u: 0x%" PRIx64
> ibex_spi_host_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 "
> size %u:"
> +
> +#pnv_spi.c
> +pnv_spi_read(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val
> 0x%" PRIx64
> +pnv_spi_write(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val
> 0x%" PRIx64
> +pnv_spi_read_RDR(uint64_t val) "data extracted = 0x%" PRIx64
> +pnv_spi_write_TDR(uint64_t val) "being written, data written = 0x%"
> PRIx64
On 6/26/24 11:05 AM, Chalapathi V wrote:
> SPI controller device model supports a connection to a single SPI responder.
> This provide access to SPI seeproms, TPM, flash device and an ADC controller.
>
> All SPI function control is mapped into the SPI register space to enable full
> control by firmware. In this commit SPI configuration component is modelled
> which contains all SPI configuration and status registers as well as the hold
> registers for data to be sent or having been received.
>
> An existing QEMU SSI framework is used and SSI_BUS is created.
>
> Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Thanks,
C.
> ---
> include/hw/ppc/pnv_xscom.h | 3 +
> include/hw/ssi/pnv_spi.h | 40 +++++++
> include/hw/ssi/pnv_spi_regs.h | 67 +++++++++++
> hw/ssi/pnv_spi.c | 214 ++++++++++++++++++++++++++++++++++
> hw/ppc/Kconfig | 3 +
> hw/ssi/Kconfig | 4 +
> hw/ssi/meson.build | 1 +
> hw/ssi/trace-events | 6 +
> 8 files changed, 338 insertions(+)
> create mode 100644 include/hw/ssi/pnv_spi.h
> create mode 100644 include/hw/ssi/pnv_spi_regs.h
> create mode 100644 hw/ssi/pnv_spi.c
>
> diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h
> index c8dd42bffd..0020dd172f 100644
> --- a/include/hw/ppc/pnv_xscom.h
> +++ b/include/hw/ppc/pnv_xscom.h
> @@ -194,6 +194,9 @@ struct PnvXScomInterfaceClass {
> #define PNV10_XSCOM_PEC_PCI_BASE 0x8010800 /* index goes upwards ... */
> #define PNV10_XSCOM_PEC_PCI_SIZE 0x200
>
> +#define PNV10_XSCOM_PIB_SPIC_BASE 0xc0000
> +#define PNV10_XSCOM_PIB_SPIC_SIZE 0x20
> +
> void pnv_xscom_init(PnvChip *chip, uint64_t size, hwaddr addr);
> int pnv_dt_xscom(PnvChip *chip, void *fdt, int root_offset,
> uint64_t xscom_base, uint64_t xscom_size,
> diff --git a/include/hw/ssi/pnv_spi.h b/include/hw/ssi/pnv_spi.h
> new file mode 100644
> index 0000000000..833042b74b
> --- /dev/null
> +++ b/include/hw/ssi/pnv_spi.h
> @@ -0,0 +1,40 @@
> +/*
> + * QEMU PowerPC SPI model
> + *
> + * Copyright (c) 2024, IBM Corporation.
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + *
> + * This model Supports a connection to a single SPI responder.
> + * Introduced for P10 to provide access to SPI seeproms, TPM, flash device
> + * and an ADC controller.
> + */
> +
> +#ifndef PPC_PNV_SPI_H
> +#define PPC_PNV_SPI_H
> +
> +#include "hw/ssi/ssi.h"
> +#include "hw/sysbus.h"
> +
> +#define TYPE_PNV_SPI "pnv-spi"
> +OBJECT_DECLARE_SIMPLE_TYPE(PnvSpi, PNV_SPI)
> +
> +#define PNV_SPI_REG_SIZE 8
> +#define PNV_SPI_REGS 7
> +
> +#define TYPE_PNV_SPI_BUS "pnv-spi-bus"
> +typedef struct PnvSpi {
> + SysBusDevice parent_obj;
> +
> + SSIBus *ssi_bus;
> + qemu_irq *cs_line;
> + MemoryRegion xscom_spic_regs;
> + /* SPI object number */
> + uint32_t spic_num;
> +
> + /* SPI registers */
> + uint64_t regs[PNV_SPI_REGS];
> + uint8_t seq_op[PNV_SPI_REG_SIZE];
> + uint64_t status;
> +} PnvSpi;
> +#endif /* PPC_PNV_SPI_H */
> diff --git a/include/hw/ssi/pnv_spi_regs.h b/include/hw/ssi/pnv_spi_regs.h
> new file mode 100644
> index 0000000000..5b6ff72d02
> --- /dev/null
> +++ b/include/hw/ssi/pnv_spi_regs.h
> @@ -0,0 +1,67 @@
> +/*
> + * QEMU PowerPC SPI model
> + *
> + * Copyright (c) 2024, IBM Corporation.
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#ifndef PNV_SPI_CONTROLLER_REGS_H
> +#define PNV_SPI_CONTROLLER_REGS_H
> +
> +/*
> + * Macros from target/ppc/cpu.h
> + * These macros are copied from ppc target specific file target/ppc/cpu.h
> + * as target/ppc/cpu.h cannot be included here.
> + */
> +#define PPC_BIT(bit) (0x8000000000000000ULL >> (bit))
> +#define PPC_BIT8(bit) (0x80 >> (bit))
> +#define PPC_BITMASK(bs, be) ((PPC_BIT(bs) - PPC_BIT(be)) | PPC_BIT(bs))
> +#define PPC_BITMASK8(bs, be) ((PPC_BIT8(bs) - PPC_BIT8(be)) | PPC_BIT8(bs))
> +#define MASK_TO_LSH(m) (__builtin_ffsll(m) - 1)
> +#define GETFIELD(m, v) (((v) & (m)) >> MASK_TO_LSH(m))
> +#define SETFIELD(m, v, val) \
> + (((v) & ~(m)) | ((((typeof(v))(val)) << MASK_TO_LSH(m)) & (m)))
> +
> +/* Error Register */
> +#define ERROR_REG 0x00
> +
> +/* counter_config_reg */
> +#define SPI_CTR_CFG_REG 0x01
> +
> +/* config_reg */
> +#define CONFIG_REG1 0x02
> +
> +/* clock_config_reset_control_ecc_enable_reg */
> +#define SPI_CLK_CFG_REG 0x03
> +#define SPI_CLK_CFG_HARD_RST 0x0084000000000000;
> +#define SPI_CLK_CFG_RST_CTRL PPC_BITMASK(24, 27)
> +
> +/* memory_mapping_reg */
> +#define SPI_MM_REG 0x04
> +
> +/* transmit_data_reg */
> +#define SPI_XMIT_DATA_REG 0x05
> +
> +/* receive_data_reg */
> +#define SPI_RCV_DATA_REG 0x06
> +
> +/* sequencer_operation_reg */
> +#define SPI_SEQ_OP_REG 0x07
> +
> +/* status_reg */
> +#define SPI_STS_REG 0x08
> +#define SPI_STS_RDR_FULL PPC_BIT(0)
> +#define SPI_STS_RDR_OVERRUN PPC_BIT(1)
> +#define SPI_STS_RDR_UNDERRUN PPC_BIT(2)
> +#define SPI_STS_TDR_FULL PPC_BIT(4)
> +#define SPI_STS_TDR_OVERRUN PPC_BIT(5)
> +#define SPI_STS_TDR_UNDERRUN PPC_BIT(6)
> +#define SPI_STS_SEQ_FSM PPC_BITMASK(8, 15)
> +#define SPI_STS_SHIFTER_FSM PPC_BITMASK(16, 27)
> +#define SPI_STS_SEQ_INDEX PPC_BITMASK(28, 31)
> +#define SPI_STS_GEN_STATUS PPC_BITMASK(32, 63)
> +#define SPI_STS_RDR PPC_BITMASK(1, 3)
> +#define SPI_STS_TDR PPC_BITMASK(5, 7)
> +
> +#endif
> diff --git a/hw/ssi/pnv_spi.c b/hw/ssi/pnv_spi.c
> new file mode 100644
> index 0000000000..de3ffc4e56
> --- /dev/null
> +++ b/hw/ssi/pnv_spi.c
> @@ -0,0 +1,214 @@
> +/*
> + * QEMU PowerPC SPI model
> + *
> + * Copyright (c) 2024, IBM Corporation.
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "hw/qdev-properties.h"
> +#include "hw/ppc/pnv_xscom.h"
> +#include "hw/ssi/pnv_spi.h"
> +#include "hw/ssi/pnv_spi_regs.h"
> +#include "hw/ssi/ssi.h"
> +#include <libfdt.h>
> +#include "hw/irq.h"
> +#include "trace.h"
> +
> +/*
> + * Macro from include/hw/ppc/fdt.h
> + * fdt.h cannot be included here as it contain ppc target specific dependency.
> + */
> +#define _FDT(exp) \
> + do { \
> + int _ret = (exp); \
> + if (_ret < 0) { \
> + error_report("error creating device tree: %s: %s", \
> + #exp, fdt_strerror(_ret)); \
> + exit(1); \
> + } \
> + } while (0)
> +
> +static uint64_t pnv_spi_xscom_read(void *opaque, hwaddr addr, unsigned size)
> +{
> + PnvSpi *s = PNV_SPI(opaque);
> + uint32_t reg = addr >> 3;
> + uint64_t val = ~0ull;
> +
> + switch (reg) {
> + case ERROR_REG:
> + case SPI_CTR_CFG_REG:
> + case CONFIG_REG1:
> + case SPI_CLK_CFG_REG:
> + case SPI_MM_REG:
> + case SPI_XMIT_DATA_REG:
> + val = s->regs[reg];
> + break;
> + case SPI_RCV_DATA_REG:
> + val = s->regs[reg];
> + trace_pnv_spi_read_RDR(val);
> + s->status = SETFIELD(SPI_STS_RDR_FULL, s->status, 0);
> + break;
> + case SPI_SEQ_OP_REG:
> + val = 0;
> + for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
> + val = (val << 8) | s->seq_op[i];
> + }
> + break;
> + case SPI_STS_REG:
> + val = s->status;
> + break;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom "
> + "read at 0x%" PRIx32 "\n", reg);
> + }
> +
> + trace_pnv_spi_read(addr, val);
> + return val;
> +}
> +
> +static void pnv_spi_xscom_write(void *opaque, hwaddr addr,
> + uint64_t val, unsigned size)
> +{
> + PnvSpi *s = PNV_SPI(opaque);
> + uint32_t reg = addr >> 3;
> +
> + trace_pnv_spi_write(addr, val);
> +
> + switch (reg) {
> + case ERROR_REG:
> + case SPI_CTR_CFG_REG:
> + case CONFIG_REG1:
> + case SPI_MM_REG:
> + case SPI_RCV_DATA_REG:
> + s->regs[reg] = val;
> + break;
> + case SPI_CLK_CFG_REG:
> + /*
> + * To reset the SPI controller write the sequence 0x5 0xA to
> + * reset_control field
> + */
> + if ((GETFIELD(SPI_CLK_CFG_RST_CTRL, s->regs[SPI_CLK_CFG_REG]) == 0x5)
> + && (GETFIELD(SPI_CLK_CFG_RST_CTRL, val) == 0xA)) {
> + /* SPI controller reset sequence completed, resetting */
> + s->regs[reg] = SPI_CLK_CFG_HARD_RST;
> + } else {
> + s->regs[reg] = val;
> + }
> + break;
> + case SPI_XMIT_DATA_REG:
> + /*
> + * Writing to the transmit data register causes the transmit data
> + * register full status bit in the status register to be set. Writing
> + * when the transmit data register full status bit is already set
> + * causes a "Resource Not Available" condition. This is not possible
> + * in the model since writes to this register are not asynchronous to
> + * the operation sequence like it would be in hardware.
> + */
> + s->regs[reg] = val;
> + trace_pnv_spi_write_TDR(val);
> + s->status = SETFIELD(SPI_STS_TDR_FULL, s->status, 1);
> + s->status = SETFIELD(SPI_STS_TDR_UNDERRUN, s->status, 0);
> + break;
> + case SPI_SEQ_OP_REG:
> + for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
> + s->seq_op[i] = (val >> (56 - i * 8)) & 0xFF;
> + }
> + break;
> + case SPI_STS_REG:
> + /* other fields are ignore_write */
> + s->status = SETFIELD(SPI_STS_RDR_OVERRUN, s->status,
> + GETFIELD(SPI_STS_RDR, val));
> + s->status = SETFIELD(SPI_STS_TDR_OVERRUN, s->status,
> + GETFIELD(SPI_STS_TDR, val));
> + break;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom "
> + "write at 0x%" PRIx32 "\n", reg);
> + }
> + return;
> +}
> +
> +static const MemoryRegionOps pnv_spi_xscom_ops = {
> + .read = pnv_spi_xscom_read,
> + .write = pnv_spi_xscom_write,
> + .valid.min_access_size = 8,
> + .valid.max_access_size = 8,
> + .impl.min_access_size = 8,
> + .impl.max_access_size = 8,
> + .endianness = DEVICE_BIG_ENDIAN,
> +};
> +
> +static Property pnv_spi_properties[] = {
> + DEFINE_PROP_UINT32("spic_num", PnvSpi, spic_num, 0),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void pnv_spi_realize(DeviceState *dev, Error **errp)
> +{
> + PnvSpi *s = PNV_SPI(dev);
> + g_autofree char *name = g_strdup_printf(TYPE_PNV_SPI_BUS ".%d",
> + s->spic_num);
> + s->ssi_bus = ssi_create_bus(dev, name);
> + s->cs_line = g_new0(qemu_irq, 1);
> + qdev_init_gpio_out_named(DEVICE(s), s->cs_line, "cs", 1);
> +
> + /* spi scoms */
> + pnv_xscom_region_init(&s->xscom_spic_regs, OBJECT(s), &pnv_spi_xscom_ops,
> + s, "xscom-spi", PNV10_XSCOM_PIB_SPIC_SIZE);
> +}
> +
> +static int pnv_spi_dt_xscom(PnvXScomInterface *dev, void *fdt,
> + int offset)
> +{
> + PnvSpi *s = PNV_SPI(dev);
> + g_autofree char *name;
> + int s_offset;
> + const char compat[] = "ibm,power10-spi";
> + uint32_t spic_pcba = PNV10_XSCOM_PIB_SPIC_BASE +
> + s->spic_num * PNV10_XSCOM_PIB_SPIC_SIZE;
> + uint32_t reg[] = {
> + cpu_to_be32(spic_pcba),
> + cpu_to_be32(PNV10_XSCOM_PIB_SPIC_SIZE)
> + };
> + name = g_strdup_printf("pnv_spi@%x", spic_pcba);
> + s_offset = fdt_add_subnode(fdt, offset, name);
> + _FDT(s_offset);
> +
> + _FDT(fdt_setprop(fdt, s_offset, "reg", reg, sizeof(reg)));
> + _FDT(fdt_setprop(fdt, s_offset, "compatible", compat, sizeof(compat)));
> + _FDT((fdt_setprop_cell(fdt, s_offset, "spic_num#", s->spic_num)));
> + return 0;
> +}
> +
> +static void pnv_spi_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> + PnvXScomInterfaceClass *xscomc = PNV_XSCOM_INTERFACE_CLASS(klass);
> +
> + xscomc->dt_xscom = pnv_spi_dt_xscom;
> +
> + dc->desc = "PowerNV SPI";
> + dc->realize = pnv_spi_realize;
> + device_class_set_props(dc, pnv_spi_properties);
> +}
> +
> +static const TypeInfo pnv_spi_info = {
> + .name = TYPE_PNV_SPI,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(PnvSpi),
> + .class_init = pnv_spi_class_init,
> + .interfaces = (InterfaceInfo[]) {
> + { TYPE_PNV_XSCOM_INTERFACE },
> + { }
> + }
> +};
> +
> +static void pnv_spi_register_types(void)
> +{
> + type_register_static(&pnv_spi_info);
> +}
> +
> +type_init(pnv_spi_register_types);
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index 78f83e78ce..4668d59eab 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -39,6 +39,9 @@ config POWERNV
> select PCI_POWERNV
> select PCA9552
> select PCA9554
> + select SSI
> + select SSI_M25P80
> + select PNV_SPI
>
> config PPC405
> bool
> diff --git a/hw/ssi/Kconfig b/hw/ssi/Kconfig
> index 83ee53c1d0..8d180de7cf 100644
> --- a/hw/ssi/Kconfig
> +++ b/hw/ssi/Kconfig
> @@ -24,3 +24,7 @@ config STM32F2XX_SPI
> config BCM2835_SPI
> bool
> select SSI
> +
> +config PNV_SPI
> + bool
> + select SSI
> diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build
> index b999aeb027..b7ad7fca3b 100644
> --- a/hw/ssi/meson.build
> +++ b/hw/ssi/meson.build
> @@ -12,3 +12,4 @@ system_ss.add(when: 'CONFIG_IMX', if_true: files('imx_spi.c'))
> system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_spi.c'))
> system_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_spi_host.c'))
> system_ss.add(when: 'CONFIG_BCM2835_SPI', if_true: files('bcm2835_spi.c'))
> +system_ss.add(when: 'CONFIG_PNV_SPI', if_true: files('pnv_spi.c'))
> diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events
> index 2d5bd2b83d..4388024a05 100644
> --- a/hw/ssi/trace-events
> +++ b/hw/ssi/trace-events
> @@ -32,3 +32,9 @@ ibex_spi_host_reset(const char *msg) "%s"
> ibex_spi_host_transfer(uint32_t tx_data, uint32_t rx_data) "tx_data: 0x%" PRIx32 " rx_data: @0x%" PRIx32
> ibex_spi_host_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64
> ibex_spi_host_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size %u:"
> +
> +#pnv_spi.c
> +pnv_spi_read(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
> +pnv_spi_write(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
> +pnv_spi_read_RDR(uint64_t val) "data extracted = 0x%" PRIx64
> +pnv_spi_write_TDR(uint64_t val) "being written, data written = 0x%" PRIx64
> An existing QEMU SSI framework is used and SSI_BUS is created.
>
> Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Thanks,
Caleb Schlossin
________________________________
From: Chalapathi V <chalapathi.v@linux.ibm.com>
Sent: Wednesday, June 26, 2024 4:05 AM
To: qemu-devel@nongnu.org <qemu-devel@nongnu.org>
Cc: qemu-ppc@nongnu.org <qemu-ppc@nongnu.org>; fbarrat@linux.ibm.com <fbarrat@linux.ibm.com>; npiggin@gmail.com <npiggin@gmail.com>; clg@kaod.org <clg@kaod.org>; CALEB SCHLOSSIN <calebs@us.ibm.com>; Chalapathi V <Chalapathi.V@ibm.com>; chalapathi.v@linux.ibm.com <chalapathi.v@linux.ibm.com>; saif.abrar@linux.ibm.com <saif.abrar@linux.ibm.com>; Dan Tan <dantan@us.ibm.com>; milesg@linux.ibm.com <milesg@linux.ibm.com>
Subject: [PATCH v5 2/6] hw/ssi: Add SPI model
SPI controller device model supports a connection to a single SPI responder.
This provide access to SPI seeproms, TPM, flash device and an ADC controller.
All SPI function control is mapped into the SPI register space to enable full
control by firmware. In this commit SPI configuration component is modelled
which contains all SPI configuration and status registers as well as the hold
registers for data to be sent or having been received.
An existing QEMU SSI framework is used and SSI_BUS is created.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
---
include/hw/ppc/pnv_xscom.h | 3 +
include/hw/ssi/pnv_spi.h | 40 +++++++
include/hw/ssi/pnv_spi_regs.h | 67 +++++++++++
hw/ssi/pnv_spi.c | 214 ++++++++++++++++++++++++++++++++++
hw/ppc/Kconfig | 3 +
hw/ssi/Kconfig | 4 +
hw/ssi/meson.build | 1 +
hw/ssi/trace-events | 6 +
8 files changed, 338 insertions(+)
create mode 100644 include/hw/ssi/pnv_spi.h
create mode 100644 include/hw/ssi/pnv_spi_regs.h
create mode 100644 hw/ssi/pnv_spi.c
diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h
index c8dd42bffd..0020dd172f 100644
--- a/include/hw/ppc/pnv_xscom.h
+++ b/include/hw/ppc/pnv_xscom.h
@@ -194,6 +194,9 @@ struct PnvXScomInterfaceClass {
#define PNV10_XSCOM_PEC_PCI_BASE 0x8010800 /* index goes upwards ... */
#define PNV10_XSCOM_PEC_PCI_SIZE 0x200
+#define PNV10_XSCOM_PIB_SPIC_BASE 0xc0000
+#define PNV10_XSCOM_PIB_SPIC_SIZE 0x20
+
void pnv_xscom_init(PnvChip *chip, uint64_t size, hwaddr addr);
int pnv_dt_xscom(PnvChip *chip, void *fdt, int root_offset,
uint64_t xscom_base, uint64_t xscom_size,
diff --git a/include/hw/ssi/pnv_spi.h b/include/hw/ssi/pnv_spi.h
new file mode 100644
index 0000000000..833042b74b
--- /dev/null
+++ b/include/hw/ssi/pnv_spi.h
@@ -0,0 +1,40 @@
+/*
+ * QEMU PowerPC SPI model
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This model Supports a connection to a single SPI responder.
+ * Introduced for P10 to provide access to SPI seeproms, TPM, flash device
+ * and an ADC controller.
+ */
+
+#ifndef PPC_PNV_SPI_H
+#define PPC_PNV_SPI_H
+
+#include "hw/ssi/ssi.h"
+#include "hw/sysbus.h"
+
+#define TYPE_PNV_SPI "pnv-spi"
+OBJECT_DECLARE_SIMPLE_TYPE(PnvSpi, PNV_SPI)
+
+#define PNV_SPI_REG_SIZE 8
+#define PNV_SPI_REGS 7
+
+#define TYPE_PNV_SPI_BUS "pnv-spi-bus"
+typedef struct PnvSpi {
+ SysBusDevice parent_obj;
+
+ SSIBus *ssi_bus;
+ qemu_irq *cs_line;
+ MemoryRegion xscom_spic_regs;
+ /* SPI object number */
+ uint32_t spic_num;
+
+ /* SPI registers */
+ uint64_t regs[PNV_SPI_REGS];
+ uint8_t seq_op[PNV_SPI_REG_SIZE];
+ uint64_t status;
+} PnvSpi;
+#endif /* PPC_PNV_SPI_H */
diff --git a/include/hw/ssi/pnv_spi_regs.h b/include/hw/ssi/pnv_spi_regs.h
new file mode 100644
index 0000000000..5b6ff72d02
--- /dev/null
+++ b/include/hw/ssi/pnv_spi_regs.h
@@ -0,0 +1,67 @@
+/*
+ * QEMU PowerPC SPI model
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef PNV_SPI_CONTROLLER_REGS_H
+#define PNV_SPI_CONTROLLER_REGS_H
+
+/*
+ * Macros from target/ppc/cpu.h
+ * These macros are copied from ppc target specific file target/ppc/cpu.h
+ * as target/ppc/cpu.h cannot be included here.
+ */
+#define PPC_BIT(bit) (0x8000000000000000ULL >> (bit))
+#define PPC_BIT8(bit) (0x80 >> (bit))
+#define PPC_BITMASK(bs, be) ((PPC_BIT(bs) - PPC_BIT(be)) | PPC_BIT(bs))
+#define PPC_BITMASK8(bs, be) ((PPC_BIT8(bs) - PPC_BIT8(be)) | PPC_BIT8(bs))
+#define MASK_TO_LSH(m) (__builtin_ffsll(m) - 1)
+#define GETFIELD(m, v) (((v) & (m)) >> MASK_TO_LSH(m))
+#define SETFIELD(m, v, val) \
+ (((v) & ~(m)) | ((((typeof(v))(val)) << MASK_TO_LSH(m)) & (m)))
+
+/* Error Register */
+#define ERROR_REG 0x00
+
+/* counter_config_reg */
+#define SPI_CTR_CFG_REG 0x01
+
+/* config_reg */
+#define CONFIG_REG1 0x02
+
+/* clock_config_reset_control_ecc_enable_reg */
+#define SPI_CLK_CFG_REG 0x03
+#define SPI_CLK_CFG_HARD_RST 0x0084000000000000;
+#define SPI_CLK_CFG_RST_CTRL PPC_BITMASK(24, 27)
+
+/* memory_mapping_reg */
+#define SPI_MM_REG 0x04
+
+/* transmit_data_reg */
+#define SPI_XMIT_DATA_REG 0x05
+
+/* receive_data_reg */
+#define SPI_RCV_DATA_REG 0x06
+
+/* sequencer_operation_reg */
+#define SPI_SEQ_OP_REG 0x07
+
+/* status_reg */
+#define SPI_STS_REG 0x08
+#define SPI_STS_RDR_FULL PPC_BIT(0)
+#define SPI_STS_RDR_OVERRUN PPC_BIT(1)
+#define SPI_STS_RDR_UNDERRUN PPC_BIT(2)
+#define SPI_STS_TDR_FULL PPC_BIT(4)
+#define SPI_STS_TDR_OVERRUN PPC_BIT(5)
+#define SPI_STS_TDR_UNDERRUN PPC_BIT(6)
+#define SPI_STS_SEQ_FSM PPC_BITMASK(8, 15)
+#define SPI_STS_SHIFTER_FSM PPC_BITMASK(16, 27)
+#define SPI_STS_SEQ_INDEX PPC_BITMASK(28, 31)
+#define SPI_STS_GEN_STATUS PPC_BITMASK(32, 63)
+#define SPI_STS_RDR PPC_BITMASK(1, 3)
+#define SPI_STS_TDR PPC_BITMASK(5, 7)
+
+#endif
diff --git a/hw/ssi/pnv_spi.c b/hw/ssi/pnv_spi.c
new file mode 100644
index 0000000000..de3ffc4e56
--- /dev/null
+++ b/hw/ssi/pnv_spi.c
@@ -0,0 +1,214 @@
+/*
+ * QEMU PowerPC SPI model
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/ppc/pnv_xscom.h"
+#include "hw/ssi/pnv_spi.h"
+#include "hw/ssi/pnv_spi_regs.h"
+#include "hw/ssi/ssi.h"
+#include <libfdt.h>
+#include "hw/irq.h"
+#include "trace.h"
+
+/*
+ * Macro from include/hw/ppc/fdt.h
+ * fdt.h cannot be included here as it contain ppc target specific dependency.
+ */
+#define _FDT(exp) \
+ do { \
+ int _ret = (exp); \
+ if (_ret < 0) { \
+ error_report("error creating device tree: %s: %s", \
+ #exp, fdt_strerror(_ret)); \
+ exit(1); \
+ } \
+ } while (0)
+
+static uint64_t pnv_spi_xscom_read(void *opaque, hwaddr addr, unsigned size)
+{
+ PnvSpi *s = PNV_SPI(opaque);
+ uint32_t reg = addr >> 3;
+ uint64_t val = ~0ull;
+
+ switch (reg) {
+ case ERROR_REG:
+ case SPI_CTR_CFG_REG:
+ case CONFIG_REG1:
+ case SPI_CLK_CFG_REG:
+ case SPI_MM_REG:
+ case SPI_XMIT_DATA_REG:
+ val = s->regs[reg];
+ break;
+ case SPI_RCV_DATA_REG:
+ val = s->regs[reg];
+ trace_pnv_spi_read_RDR(val);
+ s->status = SETFIELD(SPI_STS_RDR_FULL, s->status, 0);
+ break;
+ case SPI_SEQ_OP_REG:
+ val = 0;
+ for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
+ val = (val << 8) | s->seq_op[i];
+ }
+ break;
+ case SPI_STS_REG:
+ val = s->status;
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom "
+ "read at 0x%" PRIx32 "\n", reg);
+ }
+
+ trace_pnv_spi_read(addr, val);
+ return val;
+}
+
+static void pnv_spi_xscom_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ PnvSpi *s = PNV_SPI(opaque);
+ uint32_t reg = addr >> 3;
+
+ trace_pnv_spi_write(addr, val);
+
+ switch (reg) {
+ case ERROR_REG:
+ case SPI_CTR_CFG_REG:
+ case CONFIG_REG1:
+ case SPI_MM_REG:
+ case SPI_RCV_DATA_REG:
+ s->regs[reg] = val;
+ break;
+ case SPI_CLK_CFG_REG:
+ /*
+ * To reset the SPI controller write the sequence 0x5 0xA to
+ * reset_control field
+ */
+ if ((GETFIELD(SPI_CLK_CFG_RST_CTRL, s->regs[SPI_CLK_CFG_REG]) == 0x5)
+ && (GETFIELD(SPI_CLK_CFG_RST_CTRL, val) == 0xA)) {
+ /* SPI controller reset sequence completed, resetting */
+ s->regs[reg] = SPI_CLK_CFG_HARD_RST;
+ } else {
+ s->regs[reg] = val;
+ }
+ break;
+ case SPI_XMIT_DATA_REG:
+ /*
+ * Writing to the transmit data register causes the transmit data
+ * register full status bit in the status register to be set. Writing
+ * when the transmit data register full status bit is already set
+ * causes a "Resource Not Available" condition. This is not possible
+ * in the model since writes to this register are not asynchronous to
+ * the operation sequence like it would be in hardware.
+ */
+ s->regs[reg] = val;
+ trace_pnv_spi_write_TDR(val);
+ s->status = SETFIELD(SPI_STS_TDR_FULL, s->status, 1);
+ s->status = SETFIELD(SPI_STS_TDR_UNDERRUN, s->status, 0);
+ break;
+ case SPI_SEQ_OP_REG:
+ for (int i = 0; i < PNV_SPI_REG_SIZE; i++) {
+ s->seq_op[i] = (val >> (56 - i * 8)) & 0xFF;
+ }
+ break;
+ case SPI_STS_REG:
+ /* other fields are ignore_write */
+ s->status = SETFIELD(SPI_STS_RDR_OVERRUN, s->status,
+ GETFIELD(SPI_STS_RDR, val));
+ s->status = SETFIELD(SPI_STS_TDR_OVERRUN, s->status,
+ GETFIELD(SPI_STS_TDR, val));
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "pnv_spi_regs: Invalid xscom "
+ "write at 0x%" PRIx32 "\n", reg);
+ }
+ return;
+}
+
+static const MemoryRegionOps pnv_spi_xscom_ops = {
+ .read = pnv_spi_xscom_read,
+ .write = pnv_spi_xscom_write,
+ .valid.min_access_size = 8,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 8,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static Property pnv_spi_properties[] = {
+ DEFINE_PROP_UINT32("spic_num", PnvSpi, spic_num, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void pnv_spi_realize(DeviceState *dev, Error **errp)
+{
+ PnvSpi *s = PNV_SPI(dev);
+ g_autofree char *name = g_strdup_printf(TYPE_PNV_SPI_BUS ".%d",
+ s->spic_num);
+ s->ssi_bus = ssi_create_bus(dev, name);
+ s->cs_line = g_new0(qemu_irq, 1);
+ qdev_init_gpio_out_named(DEVICE(s), s->cs_line, "cs", 1);
+
+ /* spi scoms */
+ pnv_xscom_region_init(&s->xscom_spic_regs, OBJECT(s), &pnv_spi_xscom_ops,
+ s, "xscom-spi", PNV10_XSCOM_PIB_SPIC_SIZE);
+}
+
+static int pnv_spi_dt_xscom(PnvXScomInterface *dev, void *fdt,
+ int offset)
+{
+ PnvSpi *s = PNV_SPI(dev);
+ g_autofree char *name;
+ int s_offset;
+ const char compat[] = "ibm,power10-spi";
+ uint32_t spic_pcba = PNV10_XSCOM_PIB_SPIC_BASE +
+ s->spic_num * PNV10_XSCOM_PIB_SPIC_SIZE;
+ uint32_t reg[] = {
+ cpu_to_be32(spic_pcba),
+ cpu_to_be32(PNV10_XSCOM_PIB_SPIC_SIZE)
+ };
+ name = g_strdup_printf("pnv_spi@%x", spic_pcba);
+ s_offset = fdt_add_subnode(fdt, offset, name);
+ _FDT(s_offset);
+
+ _FDT(fdt_setprop(fdt, s_offset, "reg", reg, sizeof(reg)));
+ _FDT(fdt_setprop(fdt, s_offset, "compatible", compat, sizeof(compat)));
+ _FDT((fdt_setprop_cell(fdt, s_offset, "spic_num#", s->spic_num)));
+ return 0;
+}
+
+static void pnv_spi_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PnvXScomInterfaceClass *xscomc = PNV_XSCOM_INTERFACE_CLASS(klass);
+
+ xscomc->dt_xscom = pnv_spi_dt_xscom;
+
+ dc->desc = "PowerNV SPI";
+ dc->realize = pnv_spi_realize;
+ device_class_set_props(dc, pnv_spi_properties);
+}
+
+static const TypeInfo pnv_spi_info = {
+ .name = TYPE_PNV_SPI,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(PnvSpi),
+ .class_init = pnv_spi_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { TYPE_PNV_XSCOM_INTERFACE },
+ { }
+ }
+};
+
+static void pnv_spi_register_types(void)
+{
+ type_register_static(&pnv_spi_info);
+}
+
+type_init(pnv_spi_register_types);
diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
index 78f83e78ce..4668d59eab 100644
--- a/hw/ppc/Kconfig
+++ b/hw/ppc/Kconfig
@@ -39,6 +39,9 @@ config POWERNV
select PCI_POWERNV
select PCA9552
select PCA9554
+ select SSI
+ select SSI_M25P80
+ select PNV_SPI
config PPC405
bool
diff --git a/hw/ssi/Kconfig b/hw/ssi/Kconfig
index 83ee53c1d0..8d180de7cf 100644
--- a/hw/ssi/Kconfig
+++ b/hw/ssi/Kconfig
@@ -24,3 +24,7 @@ config STM32F2XX_SPI
config BCM2835_SPI
bool
select SSI
+
+config PNV_SPI
+ bool
+ select SSI
diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build
index b999aeb027..b7ad7fca3b 100644
--- a/hw/ssi/meson.build
+++ b/hw/ssi/meson.build
@@ -12,3 +12,4 @@ system_ss.add(when: 'CONFIG_IMX', if_true: files('imx_spi.c'))
system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_spi.c'))
system_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_spi_host.c'))
system_ss.add(when: 'CONFIG_BCM2835_SPI', if_true: files('bcm2835_spi.c'))
+system_ss.add(when: 'CONFIG_PNV_SPI', if_true: files('pnv_spi.c'))
diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events
index 2d5bd2b83d..4388024a05 100644
--- a/hw/ssi/trace-events
+++ b/hw/ssi/trace-events
@@ -32,3 +32,9 @@ ibex_spi_host_reset(const char *msg) "%s"
ibex_spi_host_transfer(uint32_t tx_data, uint32_t rx_data) "tx_data: 0x%" PRIx32 " rx_data: @0x%" PRIx32
ibex_spi_host_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64
ibex_spi_host_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size %u:"
+
+#pnv_spi.c
+pnv_spi_read(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_spi_write(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_spi_read_RDR(uint64_t val) "data extracted = 0x%" PRIx64
+pnv_spi_write_TDR(uint64_t val) "being written, data written = 0x%" PRIx64
--
2.39.3
© 2016 - 2024 Red Hat, Inc.