On Tue, Jun 25, 2024 at 6:20 AM Daniel Henrique Barboza
<dbarboza@ventanamicro.com> wrote:
>
> Add a simple guideline to use the existing RISC-V IOMMU support we just
> added.
>
> This doc will be updated once we add the riscv-iommu-sys device.
>
> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
> ---
> docs/specs/index.rst | 1 +
> docs/specs/riscv-iommu.rst | 55 ++++++++++++++++++++++++++++++++++++++
> docs/system/riscv/virt.rst | 13 +++++++++
> 3 files changed, 69 insertions(+)
> create mode 100644 docs/specs/riscv-iommu.rst
>
> diff --git a/docs/specs/index.rst b/docs/specs/index.rst
> index 1484e3e760..c68cd9ae6c 100644
> --- a/docs/specs/index.rst
> +++ b/docs/specs/index.rst
> @@ -33,3 +33,4 @@ guest hardware that is specific to QEMU.
> virt-ctlr
> vmcoreinfo
> vmgenid
> + riscv-iommu
> diff --git a/docs/specs/riscv-iommu.rst b/docs/specs/riscv-iommu.rst
> new file mode 100644
> index 0000000000..fa38ff7667
> --- /dev/null
> +++ b/docs/specs/riscv-iommu.rst
> @@ -0,0 +1,55 @@
> +.. _riscv-iommu:
> +
> +RISC-V IOMMU support for RISC-V machines
> +========================================
> +
> +QEMU implements a RISC-V IOMMU emulation based on the RISC-V IOMMU spec
> +version 1.0 [1].
> +
> +The emulation includes a PCI reference device, riscv-iommu-pci, that QEMU
> +RISC-V boards can use. The 'virt' RISC-V machine is compatible with this
> +device.
> +
> +A platform device that implements the RISC-V IOMMU will be added in the
> +future.
> +
> +
> +riscv-iommu-pci reference device
> +--------------------------------
> +
> +This device implements the RISC-V IOMMU emulation as recommended by the section
> +"Integrating an IOMMU as a PCIe device" of [1]: a PCI device with base class 08h,
> +sub-class 06h and programming interface 00h.
> +
> +As a reference device it doesn't implement anything outside of the specification,
> +so it uses a generic default PCI ID given by QEMU: 1b36:0014.
> +
> +To include the device in the 'virt' machine:
> +
> +.. code-block:: bash
> +
> + $ qemu-system-riscv64 -M virt -device riscv-iommu-pci (...)
> +
> +As of this writing the existing Linux kernel support [2], not yet merged, is being
> +created as a Rivos device, i.e. it uses Rivos vendor ID. To use the riscv-iommu-pci
> +device with the existing kernel support we need to emulate a Rivos PCI IOMMU by
> +setting 'vendor-id' and 'device-id':
> +
> +.. code-block:: bash
> +
> + $ qemu-system-riscv64 -M virt \
> + -device riscv-iommu-pci,vendor-id=0x1efd,device-id=0xedf1 (...)
> +
> +Several options are available to control the capabilities of the device, namely:
> +
> +- "bus"
> +- "ioatc-limit"
> +- "intremap"
> +- "ats"
> +- "off" (Out-of-reset translation mode: 'on' for DMA disabled, 'off' for 'BARE' (passthrough))
> +- "s-stage"
> +- "g-stage"
These names don't jump out of the spec, so we probably want to at
least provide a sentence on what they mean/do.
Alistair
> +
> +
> +[1] https://github.com/riscv-non-isa/riscv-iommu/releases/download/v1.0/riscv-iommu.pdf
> +[2] https://lore.kernel.org/linux-riscv/cover.1718388908.git.tjeznach@rivosinc.com/
> diff --git a/docs/system/riscv/virt.rst b/docs/system/riscv/virt.rst
> index 9a06f95a34..8e9a2e4dda 100644
> --- a/docs/system/riscv/virt.rst
> +++ b/docs/system/riscv/virt.rst
> @@ -84,6 +84,19 @@ none``, as in
>
> Firmware images used for pflash must be exactly 32 MiB in size.
>
> +riscv-iommu support
> +-------------------
> +
> +The board has support for the riscv-iommu-pci device by using the following
> +command line:
> +
> +.. code-block:: bash
> +
> + $ qemu-system-riscv64 -M virt -device riscv-iommu-pci (...)
> +
> +Refer to :ref:`riscv-iommu` for more information on how the RISC-V IOMMU support
> +works.
> +
> Machine-specific options
> ------------------------
>
> --
> 2.45.2
>
>