Loading a description from memory may cause a bus-error. In this
case, the DMA should stop working, set the error flag, and return
the failure value.
When calling the loading a description function, it should be noticed
that the function may return a failure value. Breaking the loop in this
case is one of the possible ways to handle it.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
---
hw/dma/xilinx_axidma.c | 30 ++++++++++++++++++++++++++----
1 file changed, 26 insertions(+), 4 deletions(-)
diff --git a/hw/dma/xilinx_axidma.c b/hw/dma/xilinx_axidma.c
index 0ae056ed06..ad307994c2 100644
--- a/hw/dma/xilinx_axidma.c
+++ b/hw/dma/xilinx_axidma.c
@@ -71,8 +71,11 @@ enum {
enum {
DMASR_HALTED = 1,
DMASR_IDLE = 2,
+ DMASR_SLVERR = 1 << 5,
+ DMASR_DECERR = 1 << 6,
DMASR_IOC_IRQ = 1 << 12,
DMASR_DLY_IRQ = 1 << 13,
+ DMASR_ERR_IRQ = 1 << 14,
DMASR_IRQ_MASK = 7 << 12
};
@@ -190,17 +193,32 @@ static inline int streamid_from_addr(hwaddr addr)
return sid;
}
-static void stream_desc_load(struct Stream *s, hwaddr addr)
+static MemTxResult stream_desc_load(struct Stream *s, hwaddr addr)
{
struct SDesc *d = &s->desc;
- address_space_read(&s->dma->as, addr, MEMTXATTRS_UNSPECIFIED, d, sizeof *d);
+ MemTxResult result = address_space_read(&s->dma->as,
+ addr, MEMTXATTRS_UNSPECIFIED,
+ d, sizeof *d);
+ if (result != MEMTX_OK) {
+ if (result == MEMTX_DECODE_ERROR) {
+ s->regs[R_DMASR] |= DMASR_DECERR;
+ } else {
+ s->regs[R_DMASR] |= DMASR_SLVERR;
+ }
+
+ s->regs[R_DMACR] &= ~DMACR_RUNSTOP;
+ s->regs[R_DMASR] |= DMASR_HALTED;
+ s->regs[R_DMASR] |= DMASR_ERR_IRQ;
+ return result;
+ }
/* Convert from LE into host endianness. */
d->buffer_address = le64_to_cpu(d->buffer_address);
d->nxtdesc = le64_to_cpu(d->nxtdesc);
d->control = le32_to_cpu(d->control);
d->status = le32_to_cpu(d->status);
+ return result;
}
static void stream_desc_store(struct Stream *s, hwaddr addr)
@@ -279,7 +297,9 @@ static void stream_process_mem2s(struct Stream *s, StreamSink *tx_data_dev,
}
while (1) {
- stream_desc_load(s, s->regs[R_CURDESC]);
+ if (MEMTX_OK != stream_desc_load(s, s->regs[R_CURDESC])) {
+ break;
+ }
if (s->desc.status & SDESC_STATUS_COMPLETE) {
s->regs[R_DMASR] |= DMASR_HALTED;
@@ -336,7 +356,9 @@ static size_t stream_process_s2mem(struct Stream *s, unsigned char *buf,
}
while (len) {
- stream_desc_load(s, s->regs[R_CURDESC]);
+ if (MEMTX_OK != stream_desc_load(s, s->regs[R_CURDESC])) {
+ break;
+ }
if (s->desc.status & SDESC_STATUS_COMPLETE) {
s->regs[R_DMASR] |= DMASR_HALTED;
--
2.34.1