From: David Hubbard <dmamfmgm@gmail.com>
This changes the ohci validation to not assert if invalid data is fed to the
ohci controller. The poc in https://bugs.launchpad.net/qemu/+bug/1907042 and
migrated to bug #303 does the following to feed it a SETUP pid (valid)
at an EndPt of 1 (invalid - all SETUP pids must be addressed to EndPt 0):
uint32_t MaxPacket = 64;
uint32_t TDFormat = 0;
uint32_t Skip = 0;
uint32_t Speed = 0;
uint32_t Direction = 0; /* #define OHCI_TD_DIR_SETUP 0 */
uint32_t EndPt = 1;
uint32_t FuncAddress = 0;
ed->attr = (MaxPacket << 16) | (TDFormat << 15) | (Skip << 14)
| (Speed << 13) | (Direction << 11) | (EndPt << 7)
| FuncAddress;
ed->tailp = /*TDQTailPntr= */ 0;
ed->headp = ((/*TDQHeadPntr= */ &td[0]) & 0xfffffff0)
| (/* ToggleCarry= */ 0 << 1);
ed->next_ed = (/* NextED= */ 0 & 0xfffffff0)
qemu-fuzz also caught the same issue in #1510. They are both fixed by this
patch.
With a tiny OS[1] that boots and executes the poc the repro shows the issue:
* OS that sends USB requests to a USB mass storage device
but sends a SETUP with EndPt = 1
* qemu 6.2.0 (Debian 1:6.2+dfsg-2ubuntu6.19)
* qemu HEAD (4e66a0854)
* Actual OHCI controller (hardware)
Command line:
qemu-system-x86_64 -m 20 \
-device pci-ohci,id=ohci \
-drive if=none,format=raw,id=d,file=testmbr.raw \
-device usb-storage,bus=ohci.0,drive=d \
--trace "usb_*" --trace "ohci_*" -D qemu.log
Results are:
qemu 6.2.0 | qemu HEAD | actual HW
------------+-----------+----------------
assertion | assertion | sets stall bit
The assertion message is:
> qemu-system-x86_64: ../../hw/usb/core.c:744: usb_ep_get: Assertion `pid == USB_TOKEN_IN || pid == USB_TOKEN_OUT' failed.
> Aborted (core dumped)
Tip: if the flags "-serial pty -serial stdio" are added to the command line
the poc outputs its USB requests like this:
> Free mem 2M ohci port0 conn FS
> setup { 80 6 0 1 0 0 8 0 }
> ED info=80000 { mps=8 en=0 d=0 } tail=c20920
> td0 c20880 nxt=c20960 f2000000 setup cbp=c20900 be=c20907 cbp=0 be=c20907
> td1 c20960 nxt=c20980 f3140000 in cbp=c20908 be=c2090f cbp=0 be=c2090f
> td2 c20980 nxt=c20920 f3080000 out cbp=0 be=0 cbp=0 be=0
> rx { 12 1 0 2 0 0 0 8 }
> setup { 0 5 1 0 0 0 0 0 } tx {}
> ED info=80000 { mps=8 en=0 d=0 } tail=c20880
> td0 c20920 nxt=c20960 f2000000 setup cbp=c20900 be=c20907 cbp=0 be=c20907
> td1 c20960 nxt=c20880 f3100000 in cbp=0 be=0 cbp=0 be=0
> setup { 80 6 0 1 0 0 12 0 }
> ED info=80081 { mps=8 en=0 d=1 } tail=c20960
> td0 c20880 nxt=c209c0 f2000000 setup cbp=c20920 be=c20927
> td1 c209c0 nxt=c209e0 f3140000 in cbp=c20928 be=c20939
> td2 c209e0 nxt=c20960 f3080000 out cbp=0 be=0qemu-system-x86_64: ../../hw/usb/core.c:744: usb_ep_get: Assertion `pid == USB_TOKEN_IN || pid == USB_TOKEN_OUT' failed.
> Aborted (core dumped)
[1] The OS disk image has been emailed to philmd@linaro.org, mjt@tls.msk.ru,
and kraxel@redhat.com:
* testBadSetup.img.xz
* sha256: 045b43f4396de02b149518358bf8025d5ba11091e86458875339fc649e6e5ac6
Signed-off-by: David Hubbard <dmamfmgm@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: authorship and signed-off-by tag names fixed up as
per on-list agreement]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/usb/hcd-ohci.c | 5 +++++
hw/usb/trace-events | 1 +
2 files changed, 6 insertions(+)
diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c
index fc8fc91a1d1..acd60169802 100644
--- a/hw/usb/hcd-ohci.c
+++ b/hw/usb/hcd-ohci.c
@@ -927,6 +927,11 @@ static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed)
case OHCI_TD_DIR_SETUP:
str = "setup";
pid = USB_TOKEN_SETUP;
+ if (OHCI_BM(ed->flags, ED_EN) > 0) { /* setup only allowed to ep 0 */
+ trace_usb_ohci_td_bad_pid(str, ed->flags, td.flags);
+ ohci_die(ohci);
+ return 1;
+ }
break;
default:
trace_usb_ohci_td_bad_direction(dir);
diff --git a/hw/usb/trace-events b/hw/usb/trace-events
index ed7dc210d3f..fd7b90d70c0 100644
--- a/hw/usb/trace-events
+++ b/hw/usb/trace-events
@@ -28,6 +28,7 @@ usb_ohci_iso_td_data_overrun(int ret, ssize_t len) "DataOverrun %d > %zu"
usb_ohci_iso_td_data_underrun(int ret) "DataUnderrun %d"
usb_ohci_iso_td_nak(int ret) "got NAK/STALL %d"
usb_ohci_iso_td_bad_response(int ret) "Bad device response %d"
+usb_ohci_td_bad_pid(const char *s, uint32_t edf, uint32_t tdf) "Bad pid %s: ed.flags 0x%x td.flags 0x%x"
usb_ohci_port_attach(int index) "port #%d"
usb_ohci_port_detach(int index) "port #%d"
usb_ohci_port_wakeup(int index) "port #%d"
--
2.34.1