Add GICR_INMIR0 register and support access GICR_INMIR0.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
v11:
- Add new Reviewed-by.
v10:
- gicr_isuperprio -> gicr_inmir0.
v6:
- Add Reviewed-by.
v4:
- Make the GICR_INMIR0 implementation more clearer.
---
hw/intc/arm_gicv3_redist.c | 19 +++++++++++++++++++
hw/intc/gicv3_internal.h | 1 +
2 files changed, 20 insertions(+)
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 8153525849..ed1f9d1e44 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -35,6 +35,15 @@ static int gicr_ns_access(GICv3CPUState *cs, int irq)
return extract32(cs->gicr_nsacr, irq * 2, 2);
}
+static void gicr_write_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs,
+ uint32_t *reg, uint32_t val)
+{
+ /* Helper routine to implement writing to a "set" register */
+ val &= mask_group(cs, attrs);
+ *reg = val;
+ gicv3_redist_update(cs);
+}
+
static void gicr_write_set_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs,
uint32_t *reg, uint32_t val)
{
@@ -406,6 +415,10 @@ static MemTxResult gicr_readl(GICv3CPUState *cs, hwaddr offset,
*data = value;
return MEMTX_OK;
}
+ case GICR_INMIR0:
+ *data = cs->gic->nmi_support ?
+ gicr_read_bitmap_reg(cs, attrs, cs->gicr_inmir0) : 0;
+ return MEMTX_OK;
case GICR_ICFGR0:
case GICR_ICFGR1:
{
@@ -555,6 +568,12 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
gicv3_redist_update(cs);
return MEMTX_OK;
}
+ case GICR_INMIR0:
+ if (cs->gic->nmi_support) {
+ gicr_write_bitmap_reg(cs, attrs, &cs->gicr_inmir0, value);
+ }
+ return MEMTX_OK;
+
case GICR_ICFGR0:
/* Register is all RAZ/WI or RAO/WI bits */
return MEMTX_OK;
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 8f4ebed2f4..21697ecf39 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -110,6 +110,7 @@
#define GICR_ICFGR1 (GICR_SGI_OFFSET + 0x0C04)
#define GICR_IGRPMODR0 (GICR_SGI_OFFSET + 0x0D00)
#define GICR_NSACR (GICR_SGI_OFFSET + 0x0E00)
+#define GICR_INMIR0 (GICR_SGI_OFFSET + 0x0F80)
/* VLPI redistributor registers, offsets from VLPI_base */
#define GICR_VPROPBASER (GICR_VLPI_OFFSET + 0x70)
--
2.34.1