add QPL compression method introduction
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
---
docs/devel/migration/features.rst | 1 +
docs/devel/migration/qpl-compression.rst | 231 +++++++++++++++++++++++
2 files changed, 232 insertions(+)
create mode 100644 docs/devel/migration/qpl-compression.rst
diff --git a/docs/devel/migration/features.rst b/docs/devel/migration/features.rst
index a9acaf618e..9819393c12 100644
--- a/docs/devel/migration/features.rst
+++ b/docs/devel/migration/features.rst
@@ -10,3 +10,4 @@ Migration has plenty of features to support different use cases.
dirty-limit
vfio
virtio
+ qpl-compression
diff --git a/docs/devel/migration/qpl-compression.rst b/docs/devel/migration/qpl-compression.rst
new file mode 100644
index 0000000000..42c7969d30
--- /dev/null
+++ b/docs/devel/migration/qpl-compression.rst
@@ -0,0 +1,231 @@
+===============
+QPL Compression
+===============
+The Intel Query Processing Library (Intel ``QPL``) is an open-source library to
+provide compression and decompression features and it is based on deflate
+compression algorithm (RFC 1951).
+
+The ``QPL`` compression relies on Intel In-Memory Analytics Accelerator(``IAA``)
+and Shared Virtual Memory(``SVM``) technology, they are new features supported
+from Intel 4th Gen Intel Xeon Scalable processors, codenamed Sapphire Rapids
+processor(``SPR``).
+
+For more ``QPL`` introduction, please refer to:
+
+https://intel.github.io/qpl/documentation/introduction_docs/introduction.html
+
+QPL Compression Framework
+=========================
+
+::
+
+ +----------------+ +------------------+
+ | MultiFD Service| |accel-config tool |
+ +-------+--------+ +--------+---------+
+ | |
+ | |
+ +-------+--------+ | Setup IAA
+ | QPL library | | Resources
+ +-------+---+----+ |
+ | | |
+ | +-------------+-------+
+ | Open IAA |
+ | Devices +-----+-----+
+ | |idxd driver|
+ | +-----+-----+
+ | |
+ | |
+ | +-----+-----+
+ +-----------+IAA Devices|
+ Submit jobs +-----------+
+ via enqcmd
+
+
+Intel In-Memory Analytics Accelerator (Intel IAA) Introduction
+================================================================
+
+Intel ``IAA`` is an accelerator that has been designed to help benefit
+in-memory databases and analytic workloads. There are three main areas
+that Intel ``IAA`` can assist with analytics primitives (scan, filter, etc.),
+sparse data compression and memory tiering.
+
+``IAA`` Manual Documentation:
+
+https://www.intel.com/content/www/us/en/content-details/721858/intel-in-memory-analytics-accelerator-architecture-specification
+
+IAA Device Enabling
+-------------------
+
+- Enabling ``IAA`` devices for platform configuration, please refer to:
+
+https://www.intel.com/content/www/us/en/content-details/780887/intel-in-memory-analytics-accelerator-intel-iaa.html
+
+- ``IAA`` device driver is ``Intel Data Accelerator Driver (idxd)``, it is
+ recommended that the minimum version of Linux kernel is 5.18.
+
+- Add ``"intel_iommu=on,sm_on"`` parameter to kernel command line
+ for ``SVM`` feature enabling.
+
+Here is an easy way to verify ``IAA`` device driver and ``SVM``, refer to:
+
+https://github.com/intel/idxd-config/tree/stable/test
+
+IAA Device Management
+---------------------
+
+The number of ``IAA`` devices will vary depending on the Xeon product model.
+On a ``SPR`` server, there can be a maximum of 8 ``IAA`` devices, with up to
+4 devices per socket.
+
+By default, all ``IAA`` devices are disabled and need to be configured and
+enabled by users manually.
+
+Check the number of devices through the following command
+
+.. code-block:: shell
+
+ # lspci -d 8086:0cfe
+ # 6a:02.0 System peripheral: Intel Corporation Device 0cfe
+ # 6f:02.0 System peripheral: Intel Corporation Device 0cfe
+ # 74:02.0 System peripheral: Intel Corporation Device 0cfe
+ # 79:02.0 System peripheral: Intel Corporation Device 0cfe
+ # e7:02.0 System peripheral: Intel Corporation Device 0cfe
+ # ec:02.0 System peripheral: Intel Corporation Device 0cfe
+ # f1:02.0 System peripheral: Intel Corporation Device 0cfe
+ # f6:02.0 System peripheral: Intel Corporation Device 0cfe
+
+IAA Device Configuration
+------------------------
+
+The ``accel-config`` tool is used to enable ``IAA`` devices and configure
+``IAA`` hardware resources(work queues and engines). One ``IAA`` device
+has 8 work queues and 8 processing engines, multiple engines can be assigned
+to a work queue via ``group`` attribute.
+
+One example of configuring and enabling an ``IAA`` device.
+
+.. code-block:: shell
+
+ # accel-config config-engine iax1/engine1.0 -g 0
+ # accel-config config-engine iax1/engine1.1 -g 0
+ # accel-config config-engine iax1/engine1.2 -g 0
+ # accel-config config-engine iax1/engine1.3 -g 0
+ # accel-config config-engine iax1/engine1.4 -g 0
+ # accel-config config-engine iax1/engine1.5 -g 0
+ # accel-config config-engine iax1/engine1.6 -g 0
+ # accel-config config-engine iax1/engine1.7 -g 0
+ # accel-config config-wq iax1/wq1.0 -g 0 -s 128 -p 10 -b 1 -t 128 -m shared -y user -n app1 -d user
+ # accel-config enable-device iax1
+ # accel-config enable-wq iax1/wq1.0
+
+.. note::
+ IAX is an early name for IAA
+
+- The ``IAA`` device index is 1, use ``ls -lh /sys/bus/dsa/devices/iax*``
+ command to query the ``IAA`` device index.
+
+- 8 engines and 1 work queue are configured in group 0, so all compression jobs
+ submitted to this work queue can be processed by all engines at the same time.
+
+- Set work queue attributes including the work mode, work queue size and so on.
+
+- Enable the ``IAA1`` device and work queue 1.0
+
+.. note::
+ Set work queue mode to shared mode, since ``QPL`` library only supports
+ shared mode
+
+For more detailed configuration, please refer to:
+
+https://github.com/intel/idxd-config/tree/stable/Documentation/accfg
+
+IAA Resources Allocation For Migration
+--------------------------------------
+
+There is no ``IAA`` resource configuration parameters for migration and
+``accel-config`` tool configuration cannot directly specify the ``IAA``
+resources used for migration.
+
+``QPL`` will use all work queues that are enabled and set to shared mode,
+and use all engines assigned to the work queues with shared mode.
+
+By default, ``QPL`` will only use the local ``IAA`` device for compression
+job processing. The local ``IAA`` device means that the CPU of the job
+submission and the ``IAA`` device are on the same socket, so one CPU
+can submit the jobs to up to 4 ``IAA`` devices.
+
+Shared Virtual Memory(SVM) Introduction
+=======================================
+
+An ability for an accelerator I/O device to operate in the same virtual
+memory space of applications on host processors. It also implies the
+ability to operate from pageable memory, avoiding functional requirements
+to pin memory for DMA operations.
+
+When using ``SVM`` technology, users do not need to reserve memory for the
+``IAA`` device and perform pin memory operation. The ``IAA`` device can
+directly access data using the virtual address of the process.
+
+For more ``SVM`` technology, please refer to:
+
+https://docs.kernel.org/next/x86/sva.html
+
+
+How To Use QPL Compression In Migration
+=======================================
+
+1 - Installation of ``accel-config`` tool and ``QPL`` library
+
+ - Install ``accel-config`` tool from https://github.com/intel/idxd-config
+ - Install ``QPL`` library from https://github.com/intel/qpl
+
+2 - Configure and enable ``IAA`` devices and work queues via ``accel-config``
+
+3 - Build ``Qemu`` with ``--enable-qpl`` parameter
+
+ E.g. configure --target-list=x86_64-softmmu --enable-kvm ``--enable-qpl``
+
+4 - Start VMs with ``sudo`` command or ``root`` permission
+
+ Use the ``sudo`` command or ``root`` privilege to start the source and
+ destination virtual machines, since migration service needs permission
+ to access ``IAA`` hardware resources.
+
+5 - Enable ``QPL`` compression during migration
+
+ Set ``migrate_set_parameter multifd-compression qpl`` when migrating, the
+ ``QPL`` compression does not support configuring the compression level, it
+ only supports one compression level.
+
+The Difference Between QPL And ZLIB
+===================================
+
+Although both ``QPL`` and ``ZLIB`` are based on the deflate compression
+algorithm, and ``QPL`` can support the header and tail of ``ZLIB``, ``QPL``
+is still not fully compatible with the ``ZLIB`` compression in the migration.
+
+``QPL`` only supports 4K history buffer, and ``ZLIB`` is 32K by default. The
+``ZLIB`` compressed data that ``QPL`` may not decompress correctly and
+vice versa.
+
+``QPL`` does not support the ``Z_SYNC_FLUSH`` operation in ``ZLIB`` streaming
+compression, current ``ZLIB`` implementation uses ``Z_SYNC_FLUSH``, so each
+``multifd`` thread has a ``ZLIB`` streaming context, and all page compression
+and decompression are based on this stream. ``QPL`` cannot decompress such data
+and vice versa.
+
+The introduction for ``Z_SYNC_FLUSH``, please refer to:
+
+https://www.zlib.net/manual.html
+
+The Best Practices
+==================
+
+When the virtual machine's pages are not populated and the ``IAA`` device is
+used, I/O page faults occur, which can impact performance due to a large number
+of flush ``IOTLB`` operations.
+
+Since the normal pages on the source side are all populated, ``IOTLB`` caused
+by I/O page fault will not occur. On the destination side, a large number
+of normal pages need to be loaded, so it is recommended to add ``-mem-prealloc``
+parameter on the destination side.
--
2.39.3© 2016 - 2024 Red Hat, Inc.