From: Philippe Mathieu-Daudé <philmd@linaro.org>

Rename NB_PORTS as EHCI_PORTS to avoid definition clash
with UHCI equivalent:

  hw/usb/hcd-ehci.h:40:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined]
  #define NB_PORTS         6        /* Max. Number of downstream ports */
          ^
  hw/usb/hcd-uhci.h:38:9: note: previous definition is here
  #define NB_PORTS 2
          ^

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
---
 hw/usb/hcd-ehci-pci.c    |  2 +-
 hw/usb/hcd-ehci-sysbus.c |  2 +-
 hw/usb/hcd-ehci.c        | 20 ++++++++++----------
 hw/usb/hcd-ehci.h        |  8 ++++----
 4 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/hw/usb/hcd-ehci-pci.c b/hw/usb/hcd-ehci-pci.c
index 0b26db74d8..3ff54edf62 100644
--- a/hw/usb/hcd-ehci-pci.c
+++ b/hw/usb/hcd-ehci-pci.c
@@ -83,7 +83,7 @@ static void usb_ehci_pci_init(Object *obj)
     s->capsbase = 0x00;
     s->opregbase = 0x20;
     s->portscbase = 0x44;
-    s->portnr = NB_PORTS;
+    s->portnr = EHCI_PORTS;
 
     if (!dc->hotpluggable) {
         s->companion_enable = true;
diff --git a/hw/usb/hcd-ehci-sysbus.c b/hw/usb/hcd-ehci-sysbus.c
index bfb774504c..fe1dabd0bb 100644
--- a/hw/usb/hcd-ehci-sysbus.c
+++ b/hw/usb/hcd-ehci-sysbus.c
@@ -88,7 +88,7 @@ static void ehci_sysbus_class_init(ObjectClass *klass, void *data)
     SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(klass);
 
     sec->portscbase = 0x44;
-    sec->portnr = NB_PORTS;
+    sec->portnr = EHCI_PORTS;
 
     dc->realize = usb_ehci_sysbus_realize;
     dc->vmsd = &vmstate_ehci_sysbus;
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 98a2860069..01864d4649 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -783,9 +783,9 @@ static void ehci_register_companion(USBBus *bus, USBPort *ports[],
     EHCIState *s = container_of(bus, EHCIState, bus);
     uint32_t i;
 
-    if (firstport + portcount > NB_PORTS) {
+    if (firstport + portcount > EHCI_PORTS) {
         error_setg(errp, "firstport must be between 0 and %u",
-                   NB_PORTS - portcount);
+                   EHCI_PORTS - portcount);
         return;
     }
 
@@ -831,7 +831,7 @@ static USBDevice *ehci_find_device(EHCIState *ehci, uint8_t addr)
     USBPort *port;
     int i;
 
-    for (i = 0; i < NB_PORTS; i++) {
+    for (i = 0; i < EHCI_PORTS; i++) {
         port = &ehci->ports[i];
         if (!(ehci->portsc[i] & PORTSC_PED)) {
             DPRINTF("Port %d not enabled\n", i);
@@ -850,7 +850,7 @@ void ehci_reset(void *opaque)
 {
     EHCIState *s = opaque;
     int i;
-    USBDevice *devs[NB_PORTS];
+    USBDevice *devs[EHCI_PORTS];
 
     trace_usb_ehci_reset();
 
@@ -858,7 +858,7 @@ void ehci_reset(void *opaque)
      * Do the detach before touching portsc, so that it correctly gets send to
      * us or to our companion based on PORTSC_POWNER before the reset.
      */
-    for(i = 0; i < NB_PORTS; i++) {
+    for(i = 0; i < EHCI_PORTS; i++) {
         devs[i] = s->ports[i].dev;
         if (devs[i] && devs[i]->attached) {
             usb_detach(&s->ports[i]);
@@ -877,7 +877,7 @@ void ehci_reset(void *opaque)
     s->astate = EST_INACTIVE;
     s->pstate = EST_INACTIVE;
 
-    for(i = 0; i < NB_PORTS; i++) {
+    for(i = 0; i < EHCI_PORTS; i++) {
         if (s->companion_ports[i]) {
             s->portsc[i] = PORTSC_POWNER | PORTSC_PPOWER;
         } else {
@@ -1086,7 +1086,7 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,
     case CONFIGFLAG:
         val &= 0x1;
         if (val) {
-            for (i = 0; i < NB_PORTS; i++) {
+            for (i = 0; i < EHCI_PORTS; i++) {
                 handle_port_owner_write(s, i, 0);
             }
         }
@@ -2427,7 +2427,7 @@ static int usb_ehci_post_load(void *opaque, int version_id)
     EHCIState *s = opaque;
     int i;
 
-    for (i = 0; i < NB_PORTS; i++) {
+    for (i = 0; i < EHCI_PORTS; i++) {
         USBPort *companion = s->companion_ports[i];
         if (companion == NULL) {
             continue;
@@ -2509,9 +2509,9 @@ void usb_ehci_realize(EHCIState *s, DeviceState *dev, Error **errp)
 {
     int i;
 
-    if (s->portnr > NB_PORTS) {
+    if (s->portnr > EHCI_PORTS) {
         error_setg(errp, "Too many ports! Max. port number is %d.",
-                   NB_PORTS);
+                   EHCI_PORTS);
         return;
     }
     if (s->maxframes < 8 || s->maxframes > 512)  {
diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h
index 2cd821f49e..56a1c09d1f 100644
--- a/hw/usb/hcd-ehci.h
+++ b/hw/usb/hcd-ehci.h
@@ -37,7 +37,7 @@
 #define MMIO_SIZE        0x1000
 #define CAPA_SIZE        0x10
 
-#define NB_PORTS         6        /* Max. Number of downstream ports */
+#define EHCI_PORTS       6        /* Max. Number of downstream ports */
 
 typedef struct EHCIPacket EHCIPacket;
 typedef struct EHCIQueue EHCIQueue;
@@ -288,7 +288,7 @@ struct EHCIState {
             uint32_t configflag;
         };
     };
-    uint32_t portsc[NB_PORTS];
+    uint32_t portsc[EHCI_PORTS];
 
     /*
      *  Internal states, shadow registers, etc
@@ -298,8 +298,8 @@ struct EHCIState {
     bool working;
     uint32_t astate;         /* Current state in asynchronous schedule */
     uint32_t pstate;         /* Current state in periodic schedule     */
-    USBPort ports[NB_PORTS];
-    USBPort *companion_ports[NB_PORTS];
+    USBPort ports[EHCI_PORTS];
+    USBPort *companion_ports[EHCI_PORTS];
     uint32_t usbsts_pending;
     uint32_t usbsts_frindex;
     EHCIQueueHead aqueues;
-- 
2.39.2