From: Fan Ni <fan.ni@samsung.com>
Not all dpa range in the DC regions is valid to access until an extent
covering the range has been added. Add a bitmap for each region to
record whether a DC block in the region has been backed by DC extent.
For the bitmap, a bit in the bitmap represents a DC block. When a DC
extent is added, all the bits of the blocks in the extent will be set,
which will be cleared when the extent is released.
Signed-off-by: Fan Ni <fan.ni@samsung.com>
---
hw/cxl/cxl-mailbox-utils.c | 3 ++
hw/mem/cxl_type3.c | 82 +++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_device.h | 7 ++++
3 files changed, 92 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 34c4ebbd12..fd3be2f9cf 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -1676,17 +1676,20 @@ static CXLRetCode cmd_dcd_release_dyn_cap(const struct cxl_cmd *cmd,
found = true;
cxl_remove_extent_from_extent_list(extent_list, ent);
ct3d->dc.total_extent_count -= 1;
+ ct3_clear_region_block_backed(ct3d, ent_start_dpa, ent_len);
if (len1) {
cxl_insert_extent_to_extent_list(extent_list,
ent_start_dpa, len1,
NULL, 0);
ct3d->dc.total_extent_count += 1;
+ ct3_set_region_block_backed(ct3d, ent_start_dpa, len1);
}
if (len2) {
cxl_insert_extent_to_extent_list(extent_list, dpa + len,
len2, NULL, 0);
ct3d->dc.total_extent_count += 1;
+ ct3_set_region_block_backed(ct3d, dpa + len, len2);
}
break;
/*Currently we reject the attempt to remove a superset*/
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index b8c4273e99..a56906db25 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -660,6 +660,7 @@ static bool cxl_create_dc_regions(CXLType3Dev *ct3d, Error **errp)
region_base += region->len;
ct3d->dc.total_capacity += region->len;
+ region->blk_bitmap = bitmap_new(region->len / region->block_size);
}
QTAILQ_INIT(&ct3d->dc.extents);
QTAILQ_INIT(&ct3d->dc.extents_pending_to_add);
@@ -667,6 +668,17 @@ static bool cxl_create_dc_regions(CXLType3Dev *ct3d, Error **errp)
return true;
}
+static void cxl_destroy_dc_regions(CXLType3Dev *ct3d)
+{
+ int i;
+ struct CXLDCDRegion *region;
+
+ for (i = 0; i < ct3d->dc.num_regions; i++) {
+ region = &ct3d->dc.regions[i];
+ g_free(region->blk_bitmap);
+ }
+}
+
static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
{
DeviceState *ds = DEVICE(ct3d);
@@ -860,6 +872,7 @@ err_free_special_ops:
g_free(regs->special_ops);
err_address_space_free:
if (ct3d->dc.host_dc) {
+ cxl_destroy_dc_regions(ct3d);
address_space_destroy(&ct3d->dc.host_dc_as);
}
if (ct3d->hostpmem) {
@@ -881,6 +894,7 @@ static void ct3_exit(PCIDevice *pci_dev)
cxl_doe_cdat_release(cxl_cstate);
g_free(regs->special_ops);
if (ct3d->dc.host_dc) {
+ cxl_destroy_dc_regions(ct3d);
address_space_destroy(&ct3d->dc.host_dc_as);
}
if (ct3d->hostpmem) {
@@ -891,6 +905,70 @@ static void ct3_exit(PCIDevice *pci_dev)
}
}
+/*
+ * Mark the DPA range [dpa, dap + len) to be backed and accessible. This
+ * happens when a DC extent is added and accepted by the host.
+ */
+void ct3_set_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
+ uint64_t len)
+{
+ CXLDCDRegion *region;
+
+ region = cxl_find_dc_region(ct3d, dpa, len);
+ if (!region) {
+ return;
+ }
+
+ bitmap_set(region->blk_bitmap, (dpa - region->base) / region->block_size,
+ len / region->block_size);
+}
+
+/*
+ * Check whether the DPA range [dpa, dpa + len) is backed with DC extents.
+ * Used when validating read/write to dc regions
+ */
+bool ct3_test_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
+ uint64_t len)
+{
+ CXLDCDRegion *region;
+ uint64_t nbits;
+ long nr;
+
+ region = cxl_find_dc_region(ct3d, dpa, len);
+ if (!region) {
+ return false;
+ }
+
+ nr = (dpa - region->base) / region->block_size;
+ nbits = DIV_ROUND_UP(len, region->block_size);
+ /*
+ * if bits between [dpa, dpa + len) are all 1s, meaning the DPA range is
+ * backed with DC extents, return true; else return false.
+ */
+ return find_next_zero_bit(region->blk_bitmap, nr + nbits, nr) == nr + nbits;
+}
+
+/*
+ * Mark the DPA range [dpa, dap + len) to be unbacked and inaccessible. This
+ * happens when a dc extent is released by the host.
+ */
+void ct3_clear_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
+ uint64_t len)
+{
+ CXLDCDRegion *region;
+ uint64_t nbits;
+ long nr;
+
+ region = cxl_find_dc_region(ct3d, dpa, len);
+ if (!region) {
+ return;
+ }
+
+ nr = (dpa - region->base) / region->block_size;
+ nbits = len / region->block_size;
+ bitmap_clear(region->blk_bitmap, nr, nbits);
+}
+
static bool cxl_type3_dpa(CXLType3Dev *ct3d, hwaddr host_addr, uint64_t *dpa)
{
int hdm_inc = R_CXL_HDM_DECODER1_BASE_LO - R_CXL_HDM_DECODER0_BASE_LO;
@@ -996,6 +1074,10 @@ static int cxl_type3_hpa_to_as_and_dpa(CXLType3Dev *ct3d,
*as = &ct3d->hostpmem_as;
*dpa_offset -= vmr_size;
} else {
+ if (!ct3_test_region_block_backed(ct3d, *dpa_offset, size)) {
+ return -ENODEV;
+ }
+
*as = &ct3d->dc.host_dc_as;
*dpa_offset -= (vmr_size + pmr_size);
}
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 1d31164bd3..10f0389b50 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -450,6 +450,7 @@ typedef struct CXLDCDRegion {
uint64_t block_size;
uint32_t dsmadhandle;
uint8_t flags;
+ unsigned long *blk_bitmap;
} CXLDCDRegion;
struct CXLType3Dev {
@@ -557,4 +558,10 @@ void cxl_insert_extent_to_extent_list(CXLDCExtentList *list,
uint8_t *tag,
uint16_t shared_seq);
bool test_any_bits_set(const unsigned long *addr, int nr, int size);
+void ct3_set_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
+ uint64_t len);
+void ct3_clear_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
+ uint64_t len);
+bool ct3_test_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
+ uint64_t len);
#endif
--
2.43.0