Add new "select" and "imply" directives if needed. The resulting
config-devices.mak files are the same as before.
Note that builds without default devices will become much smaller
than before; for this reason, it's necessary to use only the bare
minimum of USB functions, in particular only those that are inlined.
For this reason, usb_bus_find() must be removed, as it only exists
if CONFIG_USB is selected by a host controller.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
configs/devices/mips-softmmu/common.mak | 28 +++-----------------
configs/devices/mips64el-softmmu/default.mak | 3 ---
.gitlab-ci.d/buildtest.yml | 2 +-
hw/display/Kconfig | 2 +-
hw/mips/Kconfig | 20 +++++++++++++-
5 files changed, 25 insertions(+), 30 deletions(-)
diff --git a/configs/devices/mips-softmmu/common.mak b/configs/devices/mips-softmmu/common.mak
index 1a853841b27..416a5d353e8 100644
--- a/configs/devices/mips-softmmu/common.mak
+++ b/configs/devices/mips-softmmu/common.mak
@@ -1,28 +1,8 @@
# Common mips*-softmmu CONFIG defines
-CONFIG_ISA_BUS=y
-CONFIG_PCI=y
-CONFIG_PCI_DEVICES=y
-CONFIG_VGA_ISA=y
-CONFIG_VGA_MMIO=y
-CONFIG_VGA_CIRRUS=y
-CONFIG_VMWARE_VGA=y
-CONFIG_SERIAL=y
-CONFIG_SERIAL_ISA=y
-CONFIG_PARALLEL=y
-CONFIG_I8254=y
-CONFIG_PCSPK=y
-CONFIG_PCKBD=y
-CONFIG_FDC=y
-CONFIG_I8257=y
-CONFIG_IDE_ISA=y
-CONFIG_PFLASH_CFI01=y
-CONFIG_I8259=y
-CONFIG_MC146818RTC=y
-CONFIG_MIPS_CPS=y
-CONFIG_MIPS_ITU=y
+# Uncomment the following lines to disable these optional devices:
+# CONFIG_PCI_DEVICES=n
+# CONFIG_TEST_DEVICES=n
+
CONFIG_MALTA=y
-CONFIG_PCNET_PCI=y
CONFIG_MIPSSIM=y
-CONFIG_SMBUS_EEPROM=y
-CONFIG_TEST_DEVICES=y
diff --git a/configs/devices/mips64el-softmmu/default.mak b/configs/devices/mips64el-softmmu/default.mak
index d5188f7ea58..88a37cf27f1 100644
--- a/configs/devices/mips64el-softmmu/default.mak
+++ b/configs/devices/mips64el-softmmu/default.mak
@@ -3,8 +3,5 @@
include ../mips-softmmu/common.mak
CONFIG_FULOONG=y
CONFIG_LOONGSON3V=y
-CONFIG_ATI_VGA=y
-CONFIG_RTL8139_PCI=y
CONFIG_JAZZ=y
-CONFIG_VT82C686=y
CONFIG_MIPS_BOSTON=y
diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml
index f56df59c949..3aead277246 100644
--- a/.gitlab-ci.d/buildtest.yml
+++ b/.gitlab-ci.d/buildtest.yml
@@ -659,7 +659,7 @@ build-without-defaults:
--disable-pie
--disable-qom-cast-debug
--disable-strip
- TARGETS: avr-softmmu mips64-softmmu s390x-softmmu sh4-softmmu
+ TARGETS: avr-softmmu s390x-softmmu sh4-softmmu
sparc64-softmmu hexagon-linux-user i386-linux-user s390x-linux-user
MAKE_CHECK_ARGS: check
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index 1aafe1923d2..5b2b3840f7a 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -55,7 +55,7 @@ config VGA_MMIO
config VMWARE_VGA
bool
- default y if PCI_DEVICES && PC_PCI
+ default y if PCI_DEVICES && (PC_PCI || MIPS)
depends on PCI
select VGA
diff --git a/hw/mips/Kconfig b/hw/mips/Kconfig
index e57db4f6412..5c83ef49cf6 100644
--- a/hw/mips/Kconfig
+++ b/hw/mips/Kconfig
@@ -1,8 +1,15 @@
config MALTA
bool
+ imply PCNET_PCI
+ imply PCI_DEVICES
+ imply TEST_DEVICES
select FDC37M81X
select GT64120
+ select MIPS_CPS
select PIIX
+ select PFLASH_CFI01
+ select SERIAL
+ select SMBUS_EEPROM
config MIPSSIM
bool
@@ -31,17 +38,26 @@ config JAZZ
config FULOONG
bool
+ imply PCI_DEVICES
+ imply TEST_DEVICES
+ imply ATI_VGA
+ imply RTL8139_PCI
select PCI_BONITO
+ select SMBUS_EEPROM
select VT82C686
config LOONGSON3V
bool
+ imply PCI_DEVICES
+ imply TEST_DEVICES
+ imply VIRTIO_PCI
+ imply VIRTIO_NET
imply VIRTIO_VGA
imply QXL if SPICE
+ imply USB_OHCI_PCI
select SERIAL
select GOLDFISH_RTC
select LOONGSON_LIOINTC
- select PCI_DEVICES
select PCI_EXPRESS_GENERIC_BRIDGE
select MSI_NONBROKEN
select FW_CFG_MIPS
@@ -53,6 +69,8 @@ config MIPS_CPS
config MIPS_BOSTON
bool
+ imply PCI_DEVICES
+ imply TEST_DEVICES
select FITLOADER
select MIPS_CPS
select PCI_EXPRESS_XILINX
--
2.43.0