This board has a lot of UARTs: there is one UART per CPU in the
per-CPU peripheral part of the address map, whose interrupts are
connected as per-CPU interrupt lines. Then there are 4 UARTs in the
normal part of the peripheral space, whose interrupts are shared
peripheral interrupts.
Connect and wire them all up; this involves some OR gates where
multiple overflow interrupts are wired into one GIC input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/mps3r.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c
index 6473f62d677..8c790313790 100644
--- a/hw/arm/mps3r.c
+++ b/hw/arm/mps3r.c
@@ -30,10 +30,13 @@
#include "qapi/qmp/qlist.h"
#include "exec/address-spaces.h"
#include "cpu.h"
+#include "sysemu/sysemu.h"
#include "hw/boards.h"
+#include "hw/or-irq.h"
#include "hw/qdev-properties.h"
#include "hw/arm/boot.h"
#include "hw/arm/bsa.h"
+#include "hw/char/cmsdk-apb-uart.h"
#include "hw/intc/arm_gicv3.h"
/* Define the layout of RAM and ROM in a board */
@@ -65,6 +68,7 @@ typedef struct RAMInfo {
#define MPS3R_RAM_MAX 9
#define MPS3R_CPU_MAX 2
+#define MPS3R_UART_MAX 4 /* shared UART count */
#define PERIPHBASE 0xf0000000
#define NUM_SPIS 96
@@ -89,6 +93,10 @@ struct MPS3RMachineState {
MemoryRegion sysmem_alias[MPS3R_CPU_MAX];
MemoryRegion cpu_ram[MPS3R_CPU_MAX];
GICv3State gic;
+ /* per-CPU UARTs followed by the shared UARTs */
+ CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX];
+ OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX];
+ OrIRQState uart_oflow;
};
#define TYPE_MPS3R_MACHINE "mps3r"
@@ -96,6 +104,13 @@ struct MPS3RMachineState {
OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE)
+/*
+ * Main clock frequency CLK in Hz (50MHz). In the image there are also
+ * ACLK, MCLK, GPUCLK and PERIPHCLK at the same frequency; for our
+ * model we just roll them all into one.
+ */
+#define CLK_FRQ 50000000
+
static const RAMInfo an536_raminfo[] = {
{
.name = "ATCM",
@@ -279,11 +294,40 @@ static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem)
}
}
+/*
+ * Create UART uartno, and map it into the MemoryRegion mem at address baseaddr.
+ * The qemu_irq arguments are where we connect the various IRQs from the UART.
+ */
+static void create_uart(MPS3RMachineState *mms, int uartno, MemoryRegion *mem,
+ hwaddr baseaddr, qemu_irq txirq, qemu_irq rxirq,
+ qemu_irq txoverirq, qemu_irq rxoverirq,
+ qemu_irq combirq)
+{
+ g_autofree char *s = g_strdup_printf("uart%d", uartno);
+ SysBusDevice *sbd;
+
+ assert(uartno < ARRAY_SIZE(mms->uart));
+ object_initialize_child(OBJECT(mms), s, &mms->uart[uartno],
+ TYPE_CMSDK_APB_UART);
+ qdev_prop_set_uint32(DEVICE(&mms->uart[uartno]), "pclk-frq", CLK_FRQ);
+ qdev_prop_set_chr(DEVICE(&mms->uart[uartno]), "chardev", serial_hd(uartno));
+ sbd = SYS_BUS_DEVICE(&mms->uart[uartno]);
+ sysbus_realize(sbd, &error_fatal);
+ memory_region_add_subregion(mem, baseaddr,
+ sysbus_mmio_get_region(sbd, 0));
+ sysbus_connect_irq(sbd, 0, txirq);
+ sysbus_connect_irq(sbd, 1, rxirq);
+ sysbus_connect_irq(sbd, 2, txoverirq);
+ sysbus_connect_irq(sbd, 3, rxoverirq);
+ sysbus_connect_irq(sbd, 4, combirq);
+}
+
static void mps3r_common_init(MachineState *machine)
{
MPS3RMachineState *mms = MPS3R_MACHINE(machine);
MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms);
MemoryRegion *sysmem = get_system_memory();
+ DeviceState *gicdev;
for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) {
MemoryRegion *mr = mr_for_raminfo(mms, ri);
@@ -326,6 +370,56 @@ static void mps3r_common_init(MachineState *machine)
}
create_gic(mms, sysmem);
+ gicdev = DEVICE(&mms->gic);
+
+ /*
+ * UARTs 0 and 1 are per-CPU; their interrupts are wired to
+ * the relevant CPU's PPI 0..3, aka INTID 16..19
+ */
+ for (int i = 0; i < machine->smp.cpus; i++) {
+ int intidbase = NUM_SPIS + i * GIC_INTERNAL;
+ g_autofree char *s = g_strdup_printf("cpu-uart-oflow-orgate%d", i);
+ DeviceState *orgate;
+
+ /* The two overflow IRQs from the UART are ORed together into PPI 3 */
+ object_initialize_child(OBJECT(mms), s, &mms->cpu_uart_oflow[i],
+ TYPE_OR_IRQ);
+ orgate = DEVICE(&mms->cpu_uart_oflow[i]);
+ qdev_prop_set_uint32(orgate, "num-lines", 2);
+ qdev_realize(orgate, NULL, &error_fatal);
+ qdev_connect_gpio_out(orgate, 0,
+ qdev_get_gpio_in(gicdev, intidbase + 19));
+
+ create_uart(mms, i, &mms->cpu_sysmem[i], 0xe7c00000,
+ qdev_get_gpio_in(gicdev, intidbase + 17), /* tx */
+ qdev_get_gpio_in(gicdev, intidbase + 16), /* rx */
+ qdev_get_gpio_in(orgate, 0), /* txover */
+ qdev_get_gpio_in(orgate, 1), /* rxover */
+ qdev_get_gpio_in(gicdev, intidbase + 18) /* combined */);
+ }
+ /*
+ * UARTs 2 to 5 are whole-system; all overflow IRQs are ORed
+ * together into IRQ 17
+ */
+ object_initialize_child(OBJECT(mms), "uart-oflow-orgate",
+ &mms->uart_oflow, TYPE_OR_IRQ);
+ qdev_prop_set_uint32(DEVICE(&mms->uart_oflow), "num-lines",
+ MPS3R_UART_MAX * 2);
+ qdev_realize(DEVICE(&mms->uart_oflow), NULL, &error_fatal);
+ qdev_connect_gpio_out(DEVICE(&mms->uart_oflow), 0,
+ qdev_get_gpio_in(gicdev, 17));
+
+ for (int i = 0; i < MPS3R_UART_MAX; i++) {
+ hwaddr baseaddr = 0xe0205000 + i * 0x1000;
+ int rxirq = 5 + i * 2, txirq = 6 + i * 2, combirq = 13 + i;
+
+ create_uart(mms, i + MPS3R_CPU_MAX, sysmem, baseaddr,
+ qdev_get_gpio_in(gicdev, txirq),
+ qdev_get_gpio_in(gicdev, rxirq),
+ qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2),
+ qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2 + 1),
+ qdev_get_gpio_in(gicdev, combirq));
+ }
mms->bootinfo.ram_size = machine->ram_size;
mms->bootinfo.board_id = -1;
--
2.34.1