From: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>

Tracing DPRINTFs to stderr might not be desired. A developer that relies
on trace events should be able to opt-in to each trace event and rely on
QEMU's log redirection, instead of stderr by default.

This commit converts DPRINTFs in this file that are used for tracing
into trace events. DPRINTFs that report guest errors are logged with
LOG_GUEST_ERROR.

Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 799c5141c5751cf2341e1d095349612e046424a8.1706544115.git.manos.pitsidianakis@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/z2.c         | 27 ++++++++-------------------
 hw/arm/trace-events |  7 +++++++
 2 files changed, 15 insertions(+), 19 deletions(-)

diff --git a/hw/arm/z2.c b/hw/arm/z2.c
index a67fba2cfd2..eb2ff8dbc84 100644
--- a/hw/arm/z2.c
+++ b/hw/arm/z2.c
@@ -27,13 +27,7 @@
 #include "exec/address-spaces.h"
 #include "qom/object.h"
 #include "qapi/error.h"
-
-#ifdef DEBUG_Z2
-#define DPRINTF(fmt, ...) \
-        printf(fmt, ## __VA_ARGS__)
-#else
-#define DPRINTF(fmt, ...)
-#endif
+#include "trace.h"
 
 static const struct keymap map[0x100] = {
     [0 ... 0xff] = { -1, -1 },
@@ -119,6 +113,8 @@ static uint32_t zipit_lcd_transfer(SSIPeripheral *dev, uint32_t value)
 {
     ZipitLCD *z = ZIPIT_LCD(dev);
     uint16_t val;
+
+    trace_z2_lcd_reg_update(z->cur_reg, z->buf[0], z->buf[1], z->buf[2], value);
     if (z->selected) {
         z->buf[z->pos] = value & 0xff;
         z->pos++;
@@ -126,22 +122,19 @@ static uint32_t zipit_lcd_transfer(SSIPeripheral *dev, uint32_t value)
     if (z->pos == 3) {
         switch (z->buf[0]) {
         case 0x74:
-            DPRINTF("%s: reg: 0x%.2x\n", __func__, z->buf[2]);
             z->cur_reg = z->buf[2];
             break;
         case 0x76:
             val = z->buf[1] << 8 | z->buf[2];
-            DPRINTF("%s: value: 0x%.4x\n", __func__, val);
             if (z->cur_reg == 0x22 && val == 0x0000) {
                 z->enabled = 1;
-                printf("%s: LCD enabled\n", __func__);
+                trace_z2_lcd_enable_disable_result("enabled");
             } else if (z->cur_reg == 0x10 && val == 0x0000) {
                 z->enabled = 0;
-                printf("%s: LCD disabled\n", __func__);
+                trace_z2_lcd_enable_disable_result("disabled");
             }
             break;
         default:
-            DPRINTF("%s: unknown command!\n", __func__);
             break;
         }
         z->pos = 0;
@@ -211,14 +204,12 @@ static int aer915_send(I2CSlave *i2c, uint8_t data)
 
     s->buf[s->len] = data;
     if (s->len++ > 2) {
-        DPRINTF("%s: message too long (%i bytes)\n",
-            __func__, s->len);
+        trace_z2_aer915_send_too_long(s->len);
         return 1;
     }
 
     if (s->len == 2) {
-        DPRINTF("%s: reg %d value 0x%02x\n", __func__,
-                s->buf[0], s->buf[1]);
+        trace_z2_aer915_send(s->buf[0], s->buf[1]);
     }
 
     return 0;
@@ -228,14 +219,12 @@ static int aer915_event(I2CSlave *i2c, enum i2c_event event)
 {
     AER915State *s = AER915(i2c);
 
+    trace_z2_aer915_event(s->len, event);
     switch (event) {
     case I2C_START_SEND:
         s->len = 0;
         break;
     case I2C_START_RECV:
-        if (s->len != 1) {
-            DPRINTF("%s: short message!?\n", __func__);
-        }
         break;
     case I2C_FINISH:
         break;
diff --git a/hw/arm/trace-events b/hw/arm/trace-events
index 7c569432150..0ff41e6c780 100644
--- a/hw/arm/trace-events
+++ b/hw/arm/trace-events
@@ -58,3 +58,10 @@ smmuv3_inv_notifiers_iova(const char *name, uint16_t asid, uint16_t vmid, uint64
 # strongarm.c
 strongarm_uart_update_parameters(const char *label, int speed, char parity, int data_bits, int stop_bits) "%s speed=%d parity=%c data=%d stop=%d"
 strongarm_ssp_read_underrun(void) "SSP rx underrun"
+
+# z2.c
+z2_lcd_reg_update(uint8_t cur, uint8_t i_0, uint8_t i_1, uint8_t i_2, uint32_t value) "cur_reg = 0x%x, buf = [0x%x, 0x%x, 0x%x], value = 0x%x"
+z2_lcd_enable_disable_result(const char *result) "LCD %s"
+z2_aer915_send_too_long(int8_t msg) "message too long (%i bytes)"
+z2_aer915_send(uint8_t reg, uint8_t value) "reg %d value 0x%02x"
+z2_aer915_event(int8_t event, int8_t len) "i2c event =0x%x len=%d bytes"
-- 
2.34.1