Generate Serial Port Console Redirection Table (SPCR) for RISC-V
virtual machine.

Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
 hw/riscv/virt-acpi-build.c | 39 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/hw/riscv/virt-acpi-build.c b/hw/riscv/virt-acpi-build.c
index 26c7e4482d..7fc5071c84 100644
--- a/hw/riscv/virt-acpi-build.c
+++ b/hw/riscv/virt-acpi-build.c
@@ -174,6 +174,42 @@ acpi_dsdt_add_uart(Aml *scope, const MemMapEntry *uart_memmap,
     aml_append(scope, dev);
 }
 
+/*
+ * Serial Port Console Redirection Table (SPCR)
+ * Rev: 1.07
+ */
+
+static void
+spcr_setup(GArray *table_data, BIOSLinker *linker, RISCVVirtState *s)
+{
+    AcpiSpcrData serial = {
+        .interface_type = 0,       /* 16550 compatible */
+        .base_addr.id = AML_AS_SYSTEM_MEMORY,
+        .base_addr.width = 32,
+        .base_addr.offset = 0,
+        .base_addr.size = 1,
+        .base_addr.addr = s->memmap[VIRT_UART0].base,
+        .interrupt_type = (1 << 4),/* Bit[4] RISC-V PLIC/APLIC */
+        .pc_interrupt = 0,
+        .interrupt = UART0_IRQ,
+        .baud_rate = 7,            /* 15200 */
+        .parity = 0,
+        .stop_bits = 1,
+        .flow_control = 0,
+        .terminal_type = 3,        /* ANSI */
+        .language = 0,             /* Language */
+        .pci_device_id = 0xffff,   /* not a PCI device*/
+        .pci_vendor_id = 0xffff,   /* not a PCI device*/
+        .pci_bus = 0,
+        .pci_device = 0,
+        .pci_function = 0,
+        .pci_flags = 0,
+        .pci_segment = 0,
+    };
+
+    build_spcr(table_data, linker, &serial, 2, s->oem_id, s->oem_table_id);
+}
+
 /* RHCT Node[N] starts at offset 56 */
 #define RHCT_NODE_ARRAY_OFFSET 56
 
@@ -555,6 +591,9 @@ static void virt_acpi_build(RISCVVirtState *s, AcpiBuildTables *tables)
     acpi_add_table(table_offsets, tables_blob);
     build_rhct(tables_blob, tables->linker, s);
 
+    acpi_add_table(table_offsets, tables_blob);
+    spcr_setup(tables_blob, tables->linker, s);
+
     acpi_add_table(table_offsets, tables_blob);
     {
         AcpiMcfgInfo mcfg = {
-- 
2.34.1