From: Ninad Palsule <ninad@linux.ibm.com>
Added basic qtests for FSI model.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
tests/qtest/aspeed-fsi-test.c | 205 ++++++++++++++++++++++++++++++++++
tests/qtest/meson.build | 1 +
2 files changed, 206 insertions(+)
create mode 100644 tests/qtest/aspeed-fsi-test.c
diff --git a/tests/qtest/aspeed-fsi-test.c b/tests/qtest/aspeed-fsi-test.c
new file mode 100644
index 000000000000..b3020dd82118
--- /dev/null
+++ b/tests/qtest/aspeed-fsi-test.c
@@ -0,0 +1,205 @@
+/*
+ * QTest testcases for IBM's Flexible Service Interface (FSI)
+ *
+ * Copyright (c) 2023 IBM Corporation
+ *
+ * Authors:
+ * Ninad Palsule <ninad@linux.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include <glib/gstdio.h>
+
+#include "qemu/module.h"
+#include "libqtest-single.h"
+
+/* Registers from ast2600 specifications */
+#define ASPEED_FSI_ENGINER_TRIGGER 0x04
+#define ASPEED_FSI_OPB0_BUS_SELECT 0x10
+#define ASPEED_FSI_OPB1_BUS_SELECT 0x28
+#define ASPEED_FSI_OPB0_RW_DIRECTION 0x14
+#define ASPEED_FSI_OPB1_RW_DIRECTION 0x2c
+#define ASPEED_FSI_OPB0_XFER_SIZE 0x18
+#define ASPEED_FSI_OPB1_XFER_SIZE 0x30
+#define ASPEED_FSI_OPB0_BUS_ADDR 0x1c
+#define ASPEED_FSI_OPB1_BUS_ADDR 0x34
+#define ASPEED_FSI_INTRRUPT_CLEAR 0x40
+#define ASPEED_FSI_INTRRUPT_STATUS 0x48
+#define ASPEED_FSI_OPB0_BUS_STATUS 0x80
+#define ASPEED_FSI_OPB1_BUS_STATUS 0x8c
+#define ASPEED_FSI_OPB0_READ_DATA 0x84
+#define ASPEED_FSI_OPB1_READ_DATA 0x90
+
+/*
+ * FSI Base addresses from the ast2600 specifications.
+ */
+#define AST2600_OPB_FSI0_BASE_ADDR 0x1e79b000
+#define AST2600_OPB_FSI1_BASE_ADDR 0x1e79b100
+
+static uint32_t aspeed_fsi_base_addr;
+
+static uint32_t aspeed_fsi_readl(QTestState *s, uint32_t reg)
+{
+ return qtest_readl(s, aspeed_fsi_base_addr + reg);
+}
+
+static void aspeed_fsi_writel(QTestState *s, uint32_t reg, uint32_t val)
+{
+ qtest_writel(s, aspeed_fsi_base_addr + reg, val);
+}
+
+/* Setup base address and select register */
+static void test_fsi_setup(QTestState *s, uint32_t base_addr)
+{
+ uint32_t curval;
+
+ aspeed_fsi_base_addr = base_addr;
+
+ /* Set the base select register */
+ if (base_addr == AST2600_OPB_FSI0_BASE_ADDR) {
+ /* Unselect FSI1 */
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x0);
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
+ g_assert_cmpuint(curval, ==, 0x0);
+
+ /* Select FSI0 */
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x1);
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
+ g_assert_cmpuint(curval, ==, 0x1);
+ } else if (base_addr == AST2600_OPB_FSI1_BASE_ADDR) {
+ /* Unselect FSI0 */
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x0);
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
+ g_assert_cmpuint(curval, ==, 0x0);
+
+ /* Select FSI1 */
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x1);
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
+ g_assert_cmpuint(curval, ==, 0x1);
+ } else {
+ g_assert_not_reached();
+ }
+}
+
+static void test_fsi_reg_change(QTestState *s, uint32_t reg, uint32_t newval)
+{
+ uint32_t base;
+ uint32_t curval;
+
+ base = aspeed_fsi_readl(s, reg);
+ aspeed_fsi_writel(s, reg, newval);
+ curval = aspeed_fsi_readl(s, reg);
+ g_assert_cmpuint(curval, ==, newval);
+ aspeed_fsi_writel(s, reg, base);
+ curval = aspeed_fsi_readl(s, reg);
+ g_assert_cmpuint(curval, ==, base);
+}
+
+static void test_fsi0_master_regs(const void *data)
+{
+ QTestState *s = (QTestState *)data;
+
+ test_fsi_setup(s, AST2600_OPB_FSI0_BASE_ADDR);
+
+ test_fsi_reg_change(s, ASPEED_FSI_OPB0_RW_DIRECTION, 0xF3F4F514);
+ test_fsi_reg_change(s, ASPEED_FSI_OPB0_XFER_SIZE, 0xF3F4F518);
+ test_fsi_reg_change(s, ASPEED_FSI_OPB0_BUS_ADDR, 0xF3F4F51c);
+ test_fsi_reg_change(s, ASPEED_FSI_INTRRUPT_CLEAR, 0xF3F4F540);
+ test_fsi_reg_change(s, ASPEED_FSI_INTRRUPT_STATUS, 0xF3F4F548);
+ test_fsi_reg_change(s, ASPEED_FSI_OPB0_BUS_STATUS, 0xF3F4F580);
+ test_fsi_reg_change(s, ASPEED_FSI_OPB0_READ_DATA, 0xF3F4F584);
+}
+
+static void test_fsi1_master_regs(const void *data)
+{
+ QTestState *s = (QTestState *)data;
+
+ test_fsi_setup(s, AST2600_OPB_FSI1_BASE_ADDR);
+
+ test_fsi_reg_change(s, ASPEED_FSI_OPB1_RW_DIRECTION, 0xF3F4F514);
+ test_fsi_reg_change(s, ASPEED_FSI_OPB1_XFER_SIZE, 0xF3F4F518);
+ test_fsi_reg_change(s, ASPEED_FSI_OPB1_BUS_ADDR, 0xF3F4F51c);
+ test_fsi_reg_change(s, ASPEED_FSI_INTRRUPT_CLEAR, 0xF3F4F540);
+ test_fsi_reg_change(s, ASPEED_FSI_INTRRUPT_STATUS, 0xF3F4F548);
+ test_fsi_reg_change(s, ASPEED_FSI_OPB1_BUS_STATUS, 0xF3F4F580);
+ test_fsi_reg_change(s, ASPEED_FSI_OPB1_READ_DATA, 0xF3F4F584);
+}
+
+static void test_fsi0_getcfam_addr0(const void *data)
+{
+ QTestState *s = (QTestState *)data;
+ uint32_t curval;
+
+ test_fsi_setup(s, AST2600_OPB_FSI0_BASE_ADDR);
+
+ /* Master access direction read */
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB0_RW_DIRECTION, 0x1);
+ /* word */
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB0_XFER_SIZE, 0x3);
+ /* Address */
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_ADDR, 0xa0000000);
+ aspeed_fsi_writel(s, ASPEED_FSI_INTRRUPT_CLEAR, 0x1);
+ aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
+
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
+ g_assert_cmpuint(curval, ==, 0x10000);
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_STATUS);
+ g_assert_cmpuint(curval, ==, 0x0);
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_READ_DATA);
+ g_assert_cmpuint(curval, ==, 0x152d02c0);
+}
+
+static void test_fsi1_getcfam_addr0(const void *data)
+{
+ QTestState *s = (QTestState *)data;
+ uint32_t curval;
+
+ test_fsi_setup(s, AST2600_OPB_FSI1_BASE_ADDR);
+
+ /* Master access direction read */
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB1_RW_DIRECTION, 0x1);
+
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB1_XFER_SIZE, 0x3);
+ aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_ADDR, 0xa0000000);
+ aspeed_fsi_writel(s, ASPEED_FSI_INTRRUPT_CLEAR, 0x1);
+ aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
+
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
+ g_assert_cmpuint(curval, ==, 0x20000);
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_STATUS);
+ g_assert_cmpuint(curval, ==, 0x0);
+ curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_READ_DATA);
+ g_assert_cmpuint(curval, ==, 0x152d02c0);
+}
+
+int main(int argc, char **argv)
+{
+ int ret = -1;
+ QTestState *s;
+
+ g_test_init(&argc, &argv, NULL);
+
+ s = qtest_init("-machine ast2600-evb ");
+
+ /* Tests for OPB/FSI0 */
+ qtest_add_data_func("/aspeed-fsi-test/test_fsi0_master_regs", s,
+ test_fsi0_master_regs);
+
+ qtest_add_data_func("/aspeed-fsi-test/test_fsi0_getcfam_addr0", s,
+ test_fsi0_getcfam_addr0);
+
+ /* Tests for OPB/FSI1 */
+ qtest_add_data_func("/aspeed-fsi-test/test_fsi1_master_regs", s,
+ test_fsi1_master_regs);
+
+ qtest_add_data_func("/aspeed-fsi-test/test_fsi1_getcfam_addr0", s,
+ test_fsi1_getcfam_addr0);
+
+ ret = g_test_run();
+ qtest_quit(s);
+
+ return ret;
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 84a055a7d9c7..4c871fa095d9 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -217,6 +217,7 @@ qtests_arm = \
(config_all_devices.has_key('CONFIG_VEXPRESS') ? ['test-arm-mptimer'] : []) + \
(config_all_devices.has_key('CONFIG_MICROBIT') ? ['microbit-test'] : []) + \
(config_all_devices.has_key('CONFIG_STM32L4X5_SOC') ? qtests_stm32l4x5 : []) + \
+ (config_all_devices.has_key('CONFIG_FSI_APB2OPB_ASPEED') ? ['aspeed-fsi-test'] : []) + \
['arm-cpu-features',
'boot-serial-test']
--
2.43.0