From: Ninad Palsule <ninad@linux.ibm.com>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.
The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved FSIMasterState under AspeedAPB2OPBState
- modified fsi_opb_fsi_master_address() and
fsi_opb_opb2fsi_address()
- instroduced fsi_aspeed_apb2opb_init()
- reworked fsi_aspeed_apb2opb_realize()
- removed FSIMasterState object and fsi_opb_realize()
- simplified OPBus ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
include/hw/fsi/aspeed_apb2opb.h | 46 +++++
hw/fsi/aspeed_apb2opb.c | 329 ++++++++++++++++++++++++++++++++
hw/arm/Kconfig | 1 +
hw/fsi/Kconfig | 5 +
hw/fsi/meson.build | 1 +
hw/fsi/trace-events | 2 +
6 files changed, 384 insertions(+)
create mode 100644 include/hw/fsi/aspeed_apb2opb.h
create mode 100644 hw/fsi/aspeed_apb2opb.c
diff --git a/include/hw/fsi/aspeed_apb2opb.h b/include/hw/fsi/aspeed_apb2opb.h
new file mode 100644
index 000000000000..f6a2387abf28
--- /dev/null
+++ b/include/hw/fsi/aspeed_apb2opb.h
@@ -0,0 +1,46 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2024 IBM Corp.
+ *
+ * ASPEED APB2OPB Bridge
+ * IBM On-Chip Peripheral Bus
+ */
+#ifndef FSI_ASPEED_APB2OPB_H
+#define FSI_ASPEED_APB2OPB_H
+
+#include "exec/memory.h"
+#include "hw/fsi/fsi-master.h"
+#include "hw/sysbus.h"
+
+#define TYPE_FSI_OPB "fsi.opb"
+
+#define TYPE_OP_BUS "opb"
+OBJECT_DECLARE_SIMPLE_TYPE(OPBus, OP_BUS)
+
+typedef struct OPBus {
+ BusState bus;
+
+ MemoryRegion mr;
+ AddressSpace as;
+} OPBus;
+
+#define TYPE_ASPEED_APB2OPB "aspeed.apb2opb"
+OBJECT_DECLARE_SIMPLE_TYPE(AspeedAPB2OPBState, ASPEED_APB2OPB)
+
+#define ASPEED_APB2OPB_NR_REGS ((0xe8 >> 2) + 1)
+
+#define ASPEED_FSI_NUM 2
+
+typedef struct AspeedAPB2OPBState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+
+ uint32_t regs[ASPEED_APB2OPB_NR_REGS];
+ qemu_irq irq;
+
+ OPBus opb[ASPEED_FSI_NUM];
+ FSIMasterState fsi[ASPEED_FSI_NUM];
+} AspeedAPB2OPBState;
+
+#endif /* FSI_ASPEED_APB2OPB_H */
diff --git a/hw/fsi/aspeed_apb2opb.c b/hw/fsi/aspeed_apb2opb.c
new file mode 100644
index 000000000000..1e0c2032e04c
--- /dev/null
+++ b/hw/fsi/aspeed_apb2opb.c
@@ -0,0 +1,329 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2024 IBM Corp.
+ *
+ * ASPEED APB-OPB FSI interface
+ * IBM On-chip Peripheral Bus
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "qapi/error.h"
+#include "trace.h"
+
+#include "hw/fsi/aspeed_apb2opb.h"
+#include "hw/qdev-core.h"
+
+#define TO_REG(x) (x >> 2)
+
+#define APB2OPB_VERSION TO_REG(0x00)
+#define APB2OPB_TRIGGER TO_REG(0x04)
+
+#define APB2OPB_CONTROL TO_REG(0x08)
+#define APB2OPB_CONTROL_OFF BE_GENMASK(31, 13)
+
+#define APB2OPB_OPB2FSI TO_REG(0x0c)
+#define APB2OPB_OPB2FSI_OFF BE_GENMASK(31, 22)
+
+#define APB2OPB_OPB0_SEL TO_REG(0x10)
+#define APB2OPB_OPB1_SEL TO_REG(0x28)
+#define APB2OPB_OPB_SEL_EN BIT(0)
+
+#define APB2OPB_OPB0_MODE TO_REG(0x14)
+#define APB2OPB_OPB1_MODE TO_REG(0x2c)
+#define APB2OPB_OPB_MODE_RD BIT(0)
+
+#define APB2OPB_OPB0_XFER TO_REG(0x18)
+#define APB2OPB_OPB1_XFER TO_REG(0x30)
+#define APB2OPB_OPB_XFER_FULL BIT(1)
+#define APB2OPB_OPB_XFER_HALF BIT(0)
+
+#define APB2OPB_OPB0_ADDR TO_REG(0x1c)
+#define APB2OPB_OPB0_WRITE_DATA TO_REG(0x20)
+
+#define APB2OPB_OPB1_ADDR TO_REG(0x34)
+#define APB2OPB_OPB1_WRITE_DATA TO_REG(0x38)
+
+#define APB2OPB_IRQ_STS TO_REG(0x48)
+#define APB2OPB_IRQ_STS_OPB1_TX_ACK BIT(17)
+#define APB2OPB_IRQ_STS_OPB0_TX_ACK BIT(16)
+
+#define APB2OPB_OPB0_WRITE_WORD_ENDIAN TO_REG(0x4c)
+#define APB2OPB_OPB0_WRITE_WORD_ENDIAN_BE 0x0011101b
+#define APB2OPB_OPB0_WRITE_BYTE_ENDIAN TO_REG(0x50)
+#define APB2OPB_OPB0_WRITE_BYTE_ENDIAN_BE 0x0c330f3f
+#define APB2OPB_OPB1_WRITE_WORD_ENDIAN TO_REG(0x54)
+#define APB2OPB_OPB1_WRITE_BYTE_ENDIAN TO_REG(0x58)
+#define APB2OPB_OPB0_READ_BYTE_ENDIAN TO_REG(0x5c)
+#define APB2OPB_OPB1_READ_BYTE_ENDIAN TO_REG(0x60)
+#define APB2OPB_OPB0_READ_WORD_ENDIAN_BE 0x00030b1b
+
+#define APB2OPB_OPB0_READ_DATA TO_REG(0x84)
+#define APB2OPB_OPB1_READ_DATA TO_REG(0x90)
+
+/*
+ * The following magic values came from AST2600 data sheet
+ * The register values are defined under section "FSI controller"
+ * as initial values.
+ */
+static const uint32_t aspeed_apb2opb_reset[ASPEED_APB2OPB_NR_REGS] = {
+ [APB2OPB_VERSION] = 0x000000a1,
+ [APB2OPB_OPB0_WRITE_WORD_ENDIAN] = 0x0044eee4,
+ [APB2OPB_OPB0_WRITE_BYTE_ENDIAN] = 0x0055aaff,
+ [APB2OPB_OPB1_WRITE_WORD_ENDIAN] = 0x00117717,
+ [APB2OPB_OPB1_WRITE_BYTE_ENDIAN] = 0xffaa5500,
+ [APB2OPB_OPB0_READ_BYTE_ENDIAN] = 0x0044eee4,
+ [APB2OPB_OPB1_READ_BYTE_ENDIAN] = 0x00117717
+};
+
+static void fsi_opb_fsi_master_address(FSIMasterState *fsi, hwaddr addr)
+{
+ memory_region_transaction_begin();
+ memory_region_set_address(&fsi->iomem, addr);
+ memory_region_transaction_commit();
+}
+
+static void fsi_opb_opb2fsi_address(FSIMasterState *fsi, hwaddr addr)
+{
+ memory_region_transaction_begin();
+ memory_region_set_address(&fsi->opb2fsi, addr);
+ memory_region_transaction_commit();
+}
+
+static uint64_t fsi_aspeed_apb2opb_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(opaque);
+ unsigned int reg = TO_REG(addr);
+
+ trace_fsi_aspeed_apb2opb_read(addr, size);
+
+ if (reg >= ASPEED_APB2OPB_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Out of bounds read: 0x%"HWADDR_PRIx" for %u\n",
+ __func__, addr, size);
+ return 0;
+ }
+
+ return s->regs[reg];
+}
+
+static void fsi_aspeed_apb2opb_write(void *opaque, hwaddr addr, uint64_t data,
+ unsigned size)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(opaque);
+ unsigned int reg = TO_REG(addr);
+
+ trace_fsi_aspeed_apb2opb_write(addr, size, data);
+
+ if (reg >= ASPEED_APB2OPB_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Out of bounds write: %"HWADDR_PRIx" for %u\n",
+ __func__, addr, size);
+ return;
+ }
+
+ switch (reg) {
+ case APB2OPB_CONTROL:
+ fsi_opb_fsi_master_address(&s->fsi[0],
+ data & APB2OPB_CONTROL_OFF);
+ break;
+ case APB2OPB_OPB2FSI:
+ fsi_opb_opb2fsi_address(&s->fsi[0],
+ data & APB2OPB_OPB2FSI_OFF);
+ break;
+ case APB2OPB_OPB0_WRITE_WORD_ENDIAN:
+ if (data != APB2OPB_OPB0_WRITE_WORD_ENDIAN_BE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bridge needs to be driven as BE (0x%x)\n",
+ __func__, APB2OPB_OPB0_WRITE_WORD_ENDIAN_BE);
+ }
+ break;
+ case APB2OPB_OPB0_WRITE_BYTE_ENDIAN:
+ if (data != APB2OPB_OPB0_WRITE_BYTE_ENDIAN_BE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bridge needs to be driven as BE (0x%x)\n",
+ __func__, APB2OPB_OPB0_WRITE_BYTE_ENDIAN_BE);
+ }
+ break;
+ case APB2OPB_OPB0_READ_BYTE_ENDIAN:
+ if (data != APB2OPB_OPB0_READ_WORD_ENDIAN_BE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bridge needs to be driven as BE (0x%x)\n",
+ __func__, APB2OPB_OPB0_READ_WORD_ENDIAN_BE);
+ }
+ break;
+ case APB2OPB_TRIGGER:
+ {
+ uint32_t opb, op_mode, op_size, op_addr, op_data;
+ MemTxResult result;
+ bool is_write;
+ int index;
+ AddressSpace *as;
+
+ assert((s->regs[APB2OPB_OPB0_SEL] & APB2OPB_OPB_SEL_EN) ^
+ (s->regs[APB2OPB_OPB1_SEL] & APB2OPB_OPB_SEL_EN));
+
+ if (s->regs[APB2OPB_OPB0_SEL] & APB2OPB_OPB_SEL_EN) {
+ opb = 0;
+ op_mode = s->regs[APB2OPB_OPB0_MODE];
+ op_size = s->regs[APB2OPB_OPB0_XFER];
+ op_addr = s->regs[APB2OPB_OPB0_ADDR];
+ op_data = s->regs[APB2OPB_OPB0_WRITE_DATA];
+ } else if (s->regs[APB2OPB_OPB1_SEL] & APB2OPB_OPB_SEL_EN) {
+ opb = 1;
+ op_mode = s->regs[APB2OPB_OPB1_MODE];
+ op_size = s->regs[APB2OPB_OPB1_XFER];
+ op_addr = s->regs[APB2OPB_OPB1_ADDR];
+ op_data = s->regs[APB2OPB_OPB1_WRITE_DATA];
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Invalid operation: 0x%"HWADDR_PRIx" for %u\n",
+ __func__, addr, size);
+ return;
+ }
+
+ if (op_size & ~(APB2OPB_OPB_XFER_HALF | APB2OPB_OPB_XFER_FULL)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "OPB transaction failed: Unrecognized access width: %d\n",
+ op_size);
+ return;
+ }
+
+ op_size += 1;
+ is_write = !(op_mode & APB2OPB_OPB_MODE_RD);
+ index = opb ? APB2OPB_OPB1_READ_DATA : APB2OPB_OPB0_READ_DATA;
+ as = &s->opb[opb].as;
+
+ result = address_space_rw(as, op_addr, MEMTXATTRS_UNSPECIFIED,
+ &op_data, op_size, is_write);
+ if (result != MEMTX_OK) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: OPB %s failed @%08x\n",
+ __func__, is_write ? "write" : "read", op_addr);
+ return;
+ }
+
+ if (!is_write) {
+ s->regs[index] = op_data;
+ }
+
+ s->regs[APB2OPB_IRQ_STS] |= opb ? APB2OPB_IRQ_STS_OPB1_TX_ACK
+ : APB2OPB_IRQ_STS_OPB0_TX_ACK;
+ break;
+ }
+ }
+
+ s->regs[reg] = data;
+}
+
+static const struct MemoryRegionOps aspeed_apb2opb_ops = {
+ .read = fsi_aspeed_apb2opb_read,
+ .write = fsi_aspeed_apb2opb_write,
+ .valid.max_access_size = 4,
+ .valid.min_access_size = 4,
+ .impl.max_access_size = 4,
+ .impl.min_access_size = 4,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void fsi_aspeed_apb2opb_init(Object *o)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(o);
+ int i;
+
+ for (i = 0; i < ASPEED_FSI_NUM; i++) {
+ object_initialize_child(o, "fsi-master[*]", &s->fsi[i],
+ TYPE_FSI_MASTER);
+ }
+}
+
+static void fsi_aspeed_apb2opb_realize(DeviceState *dev, Error **errp)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(dev);
+ int i;
+
+ /*
+ * TODO: The OPBus model initializes the OPB address space in
+ * the .instance_init handler and this is problematic for test
+ * device-introspect-test. To avoid a memory corruption and a QEMU
+ * crash, qbus_init() should be called from realize(). Something to
+ * improve. Possibly, OPBus could also be removed.
+ */
+ for (i = 0; i < ASPEED_FSI_NUM; i++) {
+ qbus_init(&s->opb[i], sizeof(s->opb[i]), TYPE_OP_BUS, DEVICE(s),
+ NULL);
+ }
+
+ sysbus_init_irq(sbd, &s->irq);
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_apb2opb_ops, s,
+ TYPE_ASPEED_APB2OPB, 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+
+ for (i = 0; i < ASPEED_FSI_NUM; i++) {
+ if (!qdev_realize(DEVICE(&s->fsi[i]), BUS(&s->opb[i]), errp)) {
+ return;
+ }
+
+ memory_region_add_subregion(&s->opb[i].mr, 0x80000000,
+ &s->fsi[i].iomem);
+
+ memory_region_add_subregion(&s->opb[i].mr, 0xa0000000,
+ &s->fsi[i].opb2fsi);
+ }
+}
+
+static void fsi_aspeed_apb2opb_reset(DeviceState *dev)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(dev);
+
+ memcpy(s->regs, aspeed_apb2opb_reset, ASPEED_APB2OPB_NR_REGS);
+}
+
+static void fsi_aspeed_apb2opb_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "ASPEED APB2OPB Bridge";
+ dc->realize = fsi_aspeed_apb2opb_realize;
+ dc->reset = fsi_aspeed_apb2opb_reset;
+}
+
+static const TypeInfo aspeed_apb2opb_info = {
+ .name = TYPE_ASPEED_APB2OPB,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_init = fsi_aspeed_apb2opb_init,
+ .instance_size = sizeof(AspeedAPB2OPBState),
+ .class_init = fsi_aspeed_apb2opb_class_init,
+};
+
+static void aspeed_apb2opb_register_types(void)
+{
+ type_register_static(&aspeed_apb2opb_info);
+}
+
+type_init(aspeed_apb2opb_register_types);
+
+static void fsi_opb_init(Object *o)
+{
+ OPBus *opb = OP_BUS(o);
+
+ memory_region_init(&opb->mr, 0, TYPE_FSI_OPB, UINT32_MAX);
+ address_space_init(&opb->as, &opb->mr, TYPE_FSI_OPB);
+}
+
+static const TypeInfo opb_info = {
+ .name = TYPE_OP_BUS,
+ .parent = TYPE_BUS,
+ .instance_init = fsi_opb_init,
+ .instance_size = sizeof(OPBus),
+};
+
+static void fsi_opb_register_types(void)
+{
+ type_register_static(&opb_info);
+}
+
+type_init(fsi_opb_register_types);
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 218b454e97f6..744f05087fd0 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -574,6 +574,7 @@ config ASPEED_SOC
select LED
select PMBUS
select MAX31785
+ select FSI_APB2OPB_ASPEED
config MPS2
bool
diff --git a/hw/fsi/Kconfig b/hw/fsi/Kconfig
index 9c34a418d700..9cee657a0f09 100644
--- a/hw/fsi/Kconfig
+++ b/hw/fsi/Kconfig
@@ -1,2 +1,7 @@
+config FSI_APB2OPB_ASPEED
+ bool
+ depends on ASPEED_SOC
+ select FSI
+
config FSI
bool
diff --git a/hw/fsi/meson.build b/hw/fsi/meson.build
index 7803b3afd191..a18a076552fc 100644
--- a/hw/fsi/meson.build
+++ b/hw/fsi/meson.build
@@ -1 +1,2 @@
system_ss.add(when: 'CONFIG_FSI', if_true: files('lbus.c','fsi.c','cfam.c','fsi-master.c'))
+system_ss.add(when: 'CONFIG_FSI_APB2OPB_ASPEED', if_true: files('aspeed_apb2opb.c'))
diff --git a/hw/fsi/trace-events b/hw/fsi/trace-events
index bf417b6dc3c8..9e286d08d3c7 100644
--- a/hw/fsi/trace-events
+++ b/hw/fsi/trace-events
@@ -9,3 +9,5 @@ fsi_cfam_unimplemented_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%"
fsi_cfam_config_write_noaddr(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size=%d value=0x%"PRIx64
fsi_master_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size=%d"
fsi_master_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size=%d value=0x%"PRIx64
+fsi_aspeed_apb2opb_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size=%d"
+fsi_aspeed_apb2opb_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size=%d value=0x%"PRIx64
--
2.43.0
Here is an update version with a fix. I will include it in the next PR.
Thanks,
C.
From: Ninad Palsule <ninad@linux.ibm.com>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.
The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved FSIMasterState under AspeedAPB2OPBState
- modified fsi_opb_fsi_master_address() and
fsi_opb_opb2fsi_address()
- instroduced fsi_aspeed_apb2opb_init()
- reworked fsi_aspeed_apb2opb_realize()
- removed FSIMasterState object and fsi_opb_realize()
- simplified OPBus
- introduced fsi_aspeed_apb2opb_rw to fix endianness issue ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
include/hw/fsi/aspeed_apb2opb.h | 46 ++++
hw/fsi/aspeed_apb2opb.c | 367 ++++++++++++++++++++++++++++++++
hw/arm/Kconfig | 1 +
hw/fsi/Kconfig | 5 +
hw/fsi/meson.build | 1 +
hw/fsi/trace-events | 2 +
6 files changed, 422 insertions(+)
create mode 100644 include/hw/fsi/aspeed_apb2opb.h
create mode 100644 hw/fsi/aspeed_apb2opb.c
diff --git a/include/hw/fsi/aspeed_apb2opb.h b/include/hw/fsi/aspeed_apb2opb.h
new file mode 100644
index 000000000000..f6a2387abf28
--- /dev/null
+++ b/include/hw/fsi/aspeed_apb2opb.h
@@ -0,0 +1,46 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2024 IBM Corp.
+ *
+ * ASPEED APB2OPB Bridge
+ * IBM On-Chip Peripheral Bus
+ */
+#ifndef FSI_ASPEED_APB2OPB_H
+#define FSI_ASPEED_APB2OPB_H
+
+#include "exec/memory.h"
+#include "hw/fsi/fsi-master.h"
+#include "hw/sysbus.h"
+
+#define TYPE_FSI_OPB "fsi.opb"
+
+#define TYPE_OP_BUS "opb"
+OBJECT_DECLARE_SIMPLE_TYPE(OPBus, OP_BUS)
+
+typedef struct OPBus {
+ BusState bus;
+
+ MemoryRegion mr;
+ AddressSpace as;
+} OPBus;
+
+#define TYPE_ASPEED_APB2OPB "aspeed.apb2opb"
+OBJECT_DECLARE_SIMPLE_TYPE(AspeedAPB2OPBState, ASPEED_APB2OPB)
+
+#define ASPEED_APB2OPB_NR_REGS ((0xe8 >> 2) + 1)
+
+#define ASPEED_FSI_NUM 2
+
+typedef struct AspeedAPB2OPBState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+
+ uint32_t regs[ASPEED_APB2OPB_NR_REGS];
+ qemu_irq irq;
+
+ OPBus opb[ASPEED_FSI_NUM];
+ FSIMasterState fsi[ASPEED_FSI_NUM];
+} AspeedAPB2OPBState;
+
+#endif /* FSI_ASPEED_APB2OPB_H */
diff --git a/hw/fsi/aspeed_apb2opb.c b/hw/fsi/aspeed_apb2opb.c
new file mode 100644
index 000000000000..ea50718b6a2b
--- /dev/null
+++ b/hw/fsi/aspeed_apb2opb.c
@@ -0,0 +1,367 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2024 IBM Corp.
+ *
+ * ASPEED APB-OPB FSI interface
+ * IBM On-chip Peripheral Bus
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "qapi/error.h"
+#include "trace.h"
+
+#include "hw/fsi/aspeed_apb2opb.h"
+#include "hw/qdev-core.h"
+
+#define TO_REG(x) (x >> 2)
+
+#define APB2OPB_VERSION TO_REG(0x00)
+#define APB2OPB_TRIGGER TO_REG(0x04)
+
+#define APB2OPB_CONTROL TO_REG(0x08)
+#define APB2OPB_CONTROL_OFF BE_GENMASK(31, 13)
+
+#define APB2OPB_OPB2FSI TO_REG(0x0c)
+#define APB2OPB_OPB2FSI_OFF BE_GENMASK(31, 22)
+
+#define APB2OPB_OPB0_SEL TO_REG(0x10)
+#define APB2OPB_OPB1_SEL TO_REG(0x28)
+#define APB2OPB_OPB_SEL_EN BIT(0)
+
+#define APB2OPB_OPB0_MODE TO_REG(0x14)
+#define APB2OPB_OPB1_MODE TO_REG(0x2c)
+#define APB2OPB_OPB_MODE_RD BIT(0)
+
+#define APB2OPB_OPB0_XFER TO_REG(0x18)
+#define APB2OPB_OPB1_XFER TO_REG(0x30)
+#define APB2OPB_OPB_XFER_FULL BIT(1)
+#define APB2OPB_OPB_XFER_HALF BIT(0)
+
+#define APB2OPB_OPB0_ADDR TO_REG(0x1c)
+#define APB2OPB_OPB0_WRITE_DATA TO_REG(0x20)
+
+#define APB2OPB_OPB1_ADDR TO_REG(0x34)
+#define APB2OPB_OPB1_WRITE_DATA TO_REG(0x38)
+
+#define APB2OPB_IRQ_STS TO_REG(0x48)
+#define APB2OPB_IRQ_STS_OPB1_TX_ACK BIT(17)
+#define APB2OPB_IRQ_STS_OPB0_TX_ACK BIT(16)
+
+#define APB2OPB_OPB0_WRITE_WORD_ENDIAN TO_REG(0x4c)
+#define APB2OPB_OPB0_WRITE_WORD_ENDIAN_BE 0x0011101b
+#define APB2OPB_OPB0_WRITE_BYTE_ENDIAN TO_REG(0x50)
+#define APB2OPB_OPB0_WRITE_BYTE_ENDIAN_BE 0x0c330f3f
+#define APB2OPB_OPB1_WRITE_WORD_ENDIAN TO_REG(0x54)
+#define APB2OPB_OPB1_WRITE_BYTE_ENDIAN TO_REG(0x58)
+#define APB2OPB_OPB0_READ_BYTE_ENDIAN TO_REG(0x5c)
+#define APB2OPB_OPB1_READ_BYTE_ENDIAN TO_REG(0x60)
+#define APB2OPB_OPB0_READ_WORD_ENDIAN_BE 0x00030b1b
+
+#define APB2OPB_OPB0_READ_DATA TO_REG(0x84)
+#define APB2OPB_OPB1_READ_DATA TO_REG(0x90)
+
+/*
+ * The following magic values came from AST2600 data sheet
+ * The register values are defined under section "FSI controller"
+ * as initial values.
+ */
+static const uint32_t aspeed_apb2opb_reset[ASPEED_APB2OPB_NR_REGS] = {
+ [APB2OPB_VERSION] = 0x000000a1,
+ [APB2OPB_OPB0_WRITE_WORD_ENDIAN] = 0x0044eee4,
+ [APB2OPB_OPB0_WRITE_BYTE_ENDIAN] = 0x0055aaff,
+ [APB2OPB_OPB1_WRITE_WORD_ENDIAN] = 0x00117717,
+ [APB2OPB_OPB1_WRITE_BYTE_ENDIAN] = 0xffaa5500,
+ [APB2OPB_OPB0_READ_BYTE_ENDIAN] = 0x0044eee4,
+ [APB2OPB_OPB1_READ_BYTE_ENDIAN] = 0x00117717
+};
+
+static void fsi_opb_fsi_master_address(FSIMasterState *fsi, hwaddr addr)
+{
+ memory_region_transaction_begin();
+ memory_region_set_address(&fsi->iomem, addr);
+ memory_region_transaction_commit();
+}
+
+static void fsi_opb_opb2fsi_address(FSIMasterState *fsi, hwaddr addr)
+{
+ memory_region_transaction_begin();
+ memory_region_set_address(&fsi->opb2fsi, addr);
+ memory_region_transaction_commit();
+}
+
+static uint64_t fsi_aspeed_apb2opb_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(opaque);
+ unsigned int reg = TO_REG(addr);
+
+ trace_fsi_aspeed_apb2opb_read(addr, size);
+
+ if (reg >= ASPEED_APB2OPB_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Out of bounds read: 0x%"HWADDR_PRIx" for %u\n",
+ __func__, addr, size);
+ return 0;
+ }
+
+ return s->regs[reg];
+}
+
+static MemTxResult fsi_aspeed_apb2opb_rw(AddressSpace *as, hwaddr addr,
+ MemTxAttrs attrs, uint32_t *data,
+ uint32_t size, bool is_write)
+{
+ MemTxResult res;
+
+ if (is_write) {
+ switch (size) {
+ case 4:
+ address_space_stl_le(as, addr, *data, attrs, &res);
+ break;
+ case 2:
+ address_space_stw_le(as, addr, *data, attrs, &res);
+ break;
+ case 1:
+ address_space_stb(as, addr, *data, attrs, &res);
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ } else {
+ switch (size) {
+ case 4:
+ *data = address_space_ldl_le(as, addr, attrs, &res);
+ break;
+ case 2:
+ *data = address_space_lduw_le(as, addr, attrs, &res);
+ break;
+ case 1:
+ *data = address_space_ldub(as, addr, attrs, &res);
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ }
+ return res;
+}
+
+static void fsi_aspeed_apb2opb_write(void *opaque, hwaddr addr, uint64_t data,
+ unsigned size)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(opaque);
+ unsigned int reg = TO_REG(addr);
+
+ trace_fsi_aspeed_apb2opb_write(addr, size, data);
+
+ if (reg >= ASPEED_APB2OPB_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Out of bounds write: %"HWADDR_PRIx" for %u\n",
+ __func__, addr, size);
+ return;
+ }
+
+ switch (reg) {
+ case APB2OPB_CONTROL:
+ fsi_opb_fsi_master_address(&s->fsi[0],
+ data & APB2OPB_CONTROL_OFF);
+ break;
+ case APB2OPB_OPB2FSI:
+ fsi_opb_opb2fsi_address(&s->fsi[0],
+ data & APB2OPB_OPB2FSI_OFF);
+ break;
+ case APB2OPB_OPB0_WRITE_WORD_ENDIAN:
+ if (data != APB2OPB_OPB0_WRITE_WORD_ENDIAN_BE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bridge needs to be driven as BE (0x%x)\n",
+ __func__, APB2OPB_OPB0_WRITE_WORD_ENDIAN_BE);
+ }
+ break;
+ case APB2OPB_OPB0_WRITE_BYTE_ENDIAN:
+ if (data != APB2OPB_OPB0_WRITE_BYTE_ENDIAN_BE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bridge needs to be driven as BE (0x%x)\n",
+ __func__, APB2OPB_OPB0_WRITE_BYTE_ENDIAN_BE);
+ }
+ break;
+ case APB2OPB_OPB0_READ_BYTE_ENDIAN:
+ if (data != APB2OPB_OPB0_READ_WORD_ENDIAN_BE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bridge needs to be driven as BE (0x%x)\n",
+ __func__, APB2OPB_OPB0_READ_WORD_ENDIAN_BE);
+ }
+ break;
+ case APB2OPB_TRIGGER:
+ {
+ uint32_t opb, op_mode, op_size, op_addr, op_data;
+ MemTxResult result;
+ bool is_write;
+ int index;
+ AddressSpace *as;
+
+ assert((s->regs[APB2OPB_OPB0_SEL] & APB2OPB_OPB_SEL_EN) ^
+ (s->regs[APB2OPB_OPB1_SEL] & APB2OPB_OPB_SEL_EN));
+
+ if (s->regs[APB2OPB_OPB0_SEL] & APB2OPB_OPB_SEL_EN) {
+ opb = 0;
+ op_mode = s->regs[APB2OPB_OPB0_MODE];
+ op_size = s->regs[APB2OPB_OPB0_XFER];
+ op_addr = s->regs[APB2OPB_OPB0_ADDR];
+ op_data = s->regs[APB2OPB_OPB0_WRITE_DATA];
+ } else if (s->regs[APB2OPB_OPB1_SEL] & APB2OPB_OPB_SEL_EN) {
+ opb = 1;
+ op_mode = s->regs[APB2OPB_OPB1_MODE];
+ op_size = s->regs[APB2OPB_OPB1_XFER];
+ op_addr = s->regs[APB2OPB_OPB1_ADDR];
+ op_data = s->regs[APB2OPB_OPB1_WRITE_DATA];
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Invalid operation: 0x%"HWADDR_PRIx" for %u\n",
+ __func__, addr, size);
+ return;
+ }
+
+ if (op_size & ~(APB2OPB_OPB_XFER_HALF | APB2OPB_OPB_XFER_FULL)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "OPB transaction failed: Unrecognized access width: %d\n",
+ op_size);
+ return;
+ }
+
+ op_size += 1;
+ is_write = !(op_mode & APB2OPB_OPB_MODE_RD);
+ index = opb ? APB2OPB_OPB1_READ_DATA : APB2OPB_OPB0_READ_DATA;
+ as = &s->opb[opb].as;
+
+ result = fsi_aspeed_apb2opb_rw(as, op_addr, MEMTXATTRS_UNSPECIFIED,
+ &op_data, op_size, is_write);
+ if (result != MEMTX_OK) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: OPB %s failed @%08x\n",
+ __func__, is_write ? "write" : "read", op_addr);
+ return;
+ }
+
+ if (!is_write) {
+ s->regs[index] = op_data;
+ }
+
+ s->regs[APB2OPB_IRQ_STS] |= opb ? APB2OPB_IRQ_STS_OPB1_TX_ACK
+ : APB2OPB_IRQ_STS_OPB0_TX_ACK;
+ break;
+ }
+ }
+
+ s->regs[reg] = data;
+}
+
+static const struct MemoryRegionOps aspeed_apb2opb_ops = {
+ .read = fsi_aspeed_apb2opb_read,
+ .write = fsi_aspeed_apb2opb_write,
+ .valid.max_access_size = 4,
+ .valid.min_access_size = 4,
+ .impl.max_access_size = 4,
+ .impl.min_access_size = 4,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void fsi_aspeed_apb2opb_init(Object *o)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(o);
+ int i;
+
+ for (i = 0; i < ASPEED_FSI_NUM; i++) {
+ object_initialize_child(o, "fsi-master[*]", &s->fsi[i],
+ TYPE_FSI_MASTER);
+ }
+}
+
+static void fsi_aspeed_apb2opb_realize(DeviceState *dev, Error **errp)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(dev);
+ int i;
+
+ /*
+ * TODO: The OPBus model initializes the OPB address space in
+ * the .instance_init handler and this is problematic for test
+ * device-introspect-test. To avoid a memory corruption and a QEMU
+ * crash, qbus_init() should be called from realize(). Something to
+ * improve. Possibly, OPBus could also be removed.
+ */
+ for (i = 0; i < ASPEED_FSI_NUM; i++) {
+ qbus_init(&s->opb[i], sizeof(s->opb[i]), TYPE_OP_BUS, DEVICE(s),
+ NULL);
+ }
+
+ sysbus_init_irq(sbd, &s->irq);
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_apb2opb_ops, s,
+ TYPE_ASPEED_APB2OPB, 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+
+ for (i = 0; i < ASPEED_FSI_NUM; i++) {
+ if (!qdev_realize(DEVICE(&s->fsi[i]), BUS(&s->opb[i]), errp)) {
+ return;
+ }
+
+ memory_region_add_subregion(&s->opb[i].mr, 0x80000000,
+ &s->fsi[i].iomem);
+
+ memory_region_add_subregion(&s->opb[i].mr, 0xa0000000,
+ &s->fsi[i].opb2fsi);
+ }
+}
+
+static void fsi_aspeed_apb2opb_reset(DeviceState *dev)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(dev);
+
+ memcpy(s->regs, aspeed_apb2opb_reset, ASPEED_APB2OPB_NR_REGS);
+}
+
+static void fsi_aspeed_apb2opb_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "ASPEED APB2OPB Bridge";
+ dc->realize = fsi_aspeed_apb2opb_realize;
+ dc->reset = fsi_aspeed_apb2opb_reset;
+}
+
+static const TypeInfo aspeed_apb2opb_info = {
+ .name = TYPE_ASPEED_APB2OPB,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_init = fsi_aspeed_apb2opb_init,
+ .instance_size = sizeof(AspeedAPB2OPBState),
+ .class_init = fsi_aspeed_apb2opb_class_init,
+};
+
+static void aspeed_apb2opb_register_types(void)
+{
+ type_register_static(&aspeed_apb2opb_info);
+}
+
+type_init(aspeed_apb2opb_register_types);
+
+static void fsi_opb_init(Object *o)
+{
+ OPBus *opb = OP_BUS(o);
+
+ memory_region_init(&opb->mr, 0, TYPE_FSI_OPB, UINT32_MAX);
+ address_space_init(&opb->as, &opb->mr, TYPE_FSI_OPB);
+}
+
+static const TypeInfo opb_info = {
+ .name = TYPE_OP_BUS,
+ .parent = TYPE_BUS,
+ .instance_init = fsi_opb_init,
+ .instance_size = sizeof(OPBus),
+};
+
+static void fsi_opb_register_types(void)
+{
+ type_register_static(&opb_info);
+}
+
+type_init(fsi_opb_register_types);
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index f927878152a8..db08a00a45bd 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -580,6 +580,7 @@ config ASPEED_SOC
select LED
select PMBUS
select MAX31785
+ select FSI_APB2OPB_ASPEED
config MPS2
bool
diff --git a/hw/fsi/Kconfig b/hw/fsi/Kconfig
index 9c34a418d700..9cee657a0f09 100644
--- a/hw/fsi/Kconfig
+++ b/hw/fsi/Kconfig
@@ -1,2 +1,7 @@
+config FSI_APB2OPB_ASPEED
+ bool
+ depends on ASPEED_SOC
+ select FSI
+
config FSI
bool
diff --git a/hw/fsi/meson.build b/hw/fsi/meson.build
index 7803b3afd191..a18a076552fc 100644
--- a/hw/fsi/meson.build
+++ b/hw/fsi/meson.build
@@ -1 +1,2 @@
system_ss.add(when: 'CONFIG_FSI', if_true: files('lbus.c','fsi.c','cfam.c','fsi-master.c'))
+system_ss.add(when: 'CONFIG_FSI_APB2OPB_ASPEED', if_true: files('aspeed_apb2opb.c'))
diff --git a/hw/fsi/trace-events b/hw/fsi/trace-events
index bf417b6dc3c8..9e286d08d3c7 100644
--- a/hw/fsi/trace-events
+++ b/hw/fsi/trace-events
@@ -9,3 +9,5 @@ fsi_cfam_unimplemented_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%"
fsi_cfam_config_write_noaddr(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size=%d value=0x%"PRIx64
fsi_master_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size=%d"
fsi_master_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size=%d value=0x%"PRIx64
+fsi_aspeed_apb2opb_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size=%d"
+fsi_aspeed_apb2opb_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size=%d value=0x%"PRIx64
--
2.43.0
© 2016 - 2024 Red Hat, Inc.