[PATCH v4 3/4] target/riscv: SMBIOS support for RISC-V virt machine

Heinrich Schuchardt posted 4 patches 10 months, 1 week ago
Maintainers: Paolo Bonzini <pbonzini@redhat.com>, Palmer Dabbelt <palmer@dabbelt.com>, Alistair Francis <alistair.francis@wdc.com>, Bin Meng <bin.meng@windriver.com>, Weiwei Li <liwei1518@gmail.com>, Daniel Henrique Barboza <dbarboza@ventanamicro.com>, Liu Zhiwei <zhiwei_liu@linux.alibaba.com>, "Michael S. Tsirkin" <mst@redhat.com>, Igor Mammedov <imammedo@redhat.com>, Ani Sinha <anisinha@redhat.com>
[PATCH v4 3/4] target/riscv: SMBIOS support for RISC-V virt machine
Posted by Heinrich Schuchardt 10 months, 1 week ago
Generate SMBIOS tables for the RISC-V mach-virt.
Add CONFIG_SMBIOS=y to the RISC-V default config.
Set the default processor family in the type 4 table.

The implementation is based on the corresponding ARM and Loongson code.

With the patch the following firmware tables are provided:

    etc/smbios/smbios-anchor
    etc/smbios/smbios-tables

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
---
v4:
	remove a superfluous #ifdef
v3:
	use misa_mxl_max to determine bitness
v2:
	set processor family
---
 hw/riscv/Kconfig |  1 +
 hw/riscv/virt.c  | 42 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 43 insertions(+)

diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index a50717be87..5d644eb7b1 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -41,6 +41,7 @@ config RISCV_VIRT
     select RISCV_IMSIC
     select SIFIVE_PLIC
     select SIFIVE_TEST
+    select SMBIOS
     select VIRTIO_MMIO
     select FW_CFG_DMA
     select PLATFORM_BUS
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index f9fd1341fc..1b333af4f0 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -36,6 +36,7 @@
 #include "hw/riscv/boot.h"
 #include "hw/riscv/numa.h"
 #include "kvm/kvm_riscv.h"
+#include "hw/firmware/smbios.h"
 #include "hw/intc/riscv_aclint.h"
 #include "hw/intc/riscv_aplic.h"
 #include "hw/intc/sifive_plic.h"
@@ -1263,6 +1264,45 @@ static void create_platform_bus(RISCVVirtState *s, DeviceState *irqchip)
                                 sysbus_mmio_get_region(sysbus, 0));
 }
 
+static void virt_build_smbios(RISCVVirtState *s)
+{
+    MachineClass *mc = MACHINE_GET_CLASS(s);
+    MachineState *ms = MACHINE(s);
+    uint8_t *smbios_tables, *smbios_anchor;
+    size_t smbios_tables_len, smbios_anchor_len;
+    struct smbios_phys_mem_area mem_array;
+    const char *product = "QEMU Virtual Machine";
+
+    if (kvm_enabled()) {
+        product = "KVM Virtual Machine";
+    }
+
+    smbios_set_defaults("QEMU", product, mc->name, false,
+                        true, SMBIOS_ENTRY_POINT_TYPE_64);
+
+    if (riscv_is_32bit(&s->soc[0])) {
+        smbios_set_default_processor_family(0x200);
+    } else {
+        smbios_set_default_processor_family(0x201);
+    }
+
+    /* build the array of physical mem area from base_memmap */
+    mem_array.address = s->memmap[VIRT_DRAM].base;
+    mem_array.length = ms->ram_size;
+
+    smbios_get_tables(ms, &mem_array, 1,
+                      &smbios_tables, &smbios_tables_len,
+                      &smbios_anchor, &smbios_anchor_len,
+                      &error_fatal);
+
+    if (smbios_anchor) {
+        fw_cfg_add_file(s->fw_cfg, "etc/smbios/smbios-tables",
+                        smbios_tables, smbios_tables_len);
+        fw_cfg_add_file(s->fw_cfg, "etc/smbios/smbios-anchor",
+                        smbios_anchor, smbios_anchor_len);
+    }
+}
+
 static void virt_machine_done(Notifier *notifier, void *data)
 {
     RISCVVirtState *s = container_of(notifier, RISCVVirtState,
@@ -1351,6 +1393,8 @@ static void virt_machine_done(Notifier *notifier, void *data)
         riscv_setup_direct_kernel(kernel_entry, fdt_load_addr);
     }
 
+    virt_build_smbios(s);
+
     if (virt_is_acpi_enabled(s)) {
         virt_acpi_setup(s);
     }
-- 
2.43.0
Re: [PATCH v4 3/4] target/riscv: SMBIOS support for RISC-V virt machine
Posted by Andrew Jones 10 months, 1 week ago
On Tue, Jan 23, 2024 at 07:42:28PM +0100, Heinrich Schuchardt wrote:
> Generate SMBIOS tables for the RISC-V mach-virt.
> Add CONFIG_SMBIOS=y to the RISC-V default config.
> Set the default processor family in the type 4 table.
> 
> The implementation is based on the corresponding ARM and Loongson code.
> 
> With the patch the following firmware tables are provided:
> 
>     etc/smbios/smbios-anchor
>     etc/smbios/smbios-tables
> 
> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
> ---
> v4:
> 	remove a superfluous #ifdef
> v3:
> 	use misa_mxl_max to determine bitness
> v2:
> 	set processor family
> ---
>  hw/riscv/Kconfig |  1 +
>  hw/riscv/virt.c  | 42 ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 43 insertions(+)
>

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>