Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231227080821.3216113-15-gaosong@loongson.cn>
---
hw/loongarch/virt.c | 73 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 69 insertions(+), 4 deletions(-)
diff --git a/hw/loongarch/virt.c b/hw/loongarch/virt.c
index 4a20cd33c9..d13383a65a 100644
--- a/hw/loongarch/virt.c
+++ b/hw/loongarch/virt.c
@@ -316,7 +316,62 @@ static void fdt_add_fw_cfg_node(const LoongArchMachineState *lams)
g_free(nodename);
}
-static void fdt_add_pcie_node(const LoongArchMachineState *lams)
+static void fdt_add_pcie_irq_map_node(const LoongArchMachineState *lams,
+ char *nodename,
+ uint32_t *pch_pic_phandle)
+{
+ int pin, dev;
+ uint32_t irq_map_stride = 0;
+ uint32_t full_irq_map[GPEX_NUM_IRQS *GPEX_NUM_IRQS * 10] = {};
+ uint32_t *irq_map = full_irq_map;
+ const MachineState *ms = MACHINE(lams);
+
+ /* This code creates a standard swizzle of interrupts such that
+ * each device's first interrupt is based on it's PCI_SLOT number.
+ * (See pci_swizzle_map_irq_fn())
+ *
+ * We only need one entry per interrupt in the table (not one per
+ * possible slot) seeing the interrupt-map-mask will allow the table
+ * to wrap to any number of devices.
+ */
+
+ for (dev = 0; dev < GPEX_NUM_IRQS; dev++) {
+ int devfn = dev * 0x8;
+
+ for (pin = 0; pin < GPEX_NUM_IRQS; pin++) {
+ int irq_nr = 16 + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS);
+ int i = 0;
+
+ /* Fill PCI address cells */
+ irq_map[i] = cpu_to_be32(devfn << 8);
+ i += 3;
+
+ /* Fill PCI Interrupt cells */
+ irq_map[i] = cpu_to_be32(pin + 1);
+ i += 1;
+
+ /* Fill interrupt controller phandle and cells */
+ irq_map[i++] = cpu_to_be32(*pch_pic_phandle);
+ irq_map[i++] = cpu_to_be32(irq_nr);
+
+ if (!irq_map_stride) {
+ irq_map_stride = i;
+ }
+ irq_map += irq_map_stride;
+ }
+ }
+
+
+ qemu_fdt_setprop(ms->fdt, nodename, "interrupt-map", full_irq_map,
+ GPEX_NUM_IRQS * GPEX_NUM_IRQS *
+ irq_map_stride * sizeof(uint32_t));
+ qemu_fdt_setprop_cells(ms->fdt, nodename, "interrupt-map-mask",
+ 0x1800, 0, 0, 0x7);
+}
+
+static void fdt_add_pcie_node(const LoongArchMachineState *lams,
+ uint32_t *pch_pic_phandle,
+ uint32_t *pch_msi_phandle)
{
char *nodename;
hwaddr base_mmio = VIRT_PCI_MEM_BASE;
@@ -347,6 +402,11 @@ static void fdt_add_pcie_node(const LoongArchMachineState *lams)
2, base_pio, 2, size_pio,
1, FDT_PCI_RANGE_MMIO, 2, base_mmio,
2, base_mmio, 2, size_mmio);
+ qemu_fdt_setprop_cells(ms->fdt, nodename, "msi-map",
+ 0, *pch_msi_phandle, 0, 0x10000);
+
+ fdt_add_pcie_irq_map_node(lams, nodename, pch_pic_phandle);
+
g_free(nodename);
}
@@ -505,7 +565,10 @@ static DeviceState *create_platform_bus(DeviceState *pch_pic)
return dev;
}
-static void loongarch_devices_init(DeviceState *pch_pic, LoongArchMachineState *lams)
+static void loongarch_devices_init(DeviceState *pch_pic,
+ LoongArchMachineState *lams,
+ uint32_t *pch_pic_phandle,
+ uint32_t *pch_msi_phandle)
{
MachineClass *mc = MACHINE_GET_CLASS(lams);
DeviceState *gpex_dev;
@@ -551,6 +614,9 @@ static void loongarch_devices_init(DeviceState *pch_pic, LoongArchMachineState *
gpex_set_irq_num(GPEX_HOST(gpex_dev), i, 16 + i);
}
+ /* Add pcie node */
+ fdt_add_pcie_node(lams, pch_pic_phandle, pch_msi_phandle);
+
serial_mm_init(get_system_memory(), VIRT_UART_BASE, 0,
qdev_get_gpio_in(pch_pic,
VIRT_UART_IRQ - VIRT_GSI_BASE),
@@ -699,7 +765,7 @@ static void loongarch_irq_init(LoongArchMachineState *lams)
/* Add PCH MSI node */
fdt_add_pch_msi_node(lams, &eiointc_phandle, &pch_msi_phandle);
- loongarch_devices_init(pch_pic, lams);
+ loongarch_devices_init(pch_pic, lams, &pch_pic_phandle, &pch_msi_phandle);
}
static void loongarch_firmware_init(LoongArchMachineState *lams)
@@ -906,7 +972,6 @@ static void loongarch_init(MachineState *machine)
lams->powerdown_notifier.notify = virt_powerdown_req;
qemu_register_powerdown_notifier(&lams->powerdown_notifier);
- fdt_add_pcie_node(lams);
/*
* Since lowmem region starts from 0 and Linux kernel legacy start address
* at 2 MiB, FDT base address is located at 1 MiB to avoid NULL pointer
--
2.25.1