hw/scsi/esp-pci.c | 61 +++++++++++++++++++++++++++++++---------------- 1 file changed, 41 insertions(+), 20 deletions(-)
This series contains fixes for the esp-pci device (am53c974 or dc390) for a
few issues spotted whilst testing the previous ESP series.
Patches 1-3 are fixes for issues found by Helge/Guenter whilst testing the
hppa C3700 machine with the amd53c974/dc390 devices under Linux, whilst patch
4 fixes an issue that was exposed by testing MS-DOS and Windows drivers.
With this series applied on top of the reworked ESP device, it is possible to
boot Linux under qemu-system-hppa without any errors and also boot and install
Win98SE from a DC390 PCI SCSI controller (no IDE!) using an MS-DOS boot floppy.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Based-on: 20240112125420.514425-1-mark.cave-ayland@ilande.co.uk
Mark Cave-Ayland (4):
esp-pci.c: use correct address register for PCI DMA transfers
esp-pci.c: generate PCI interrupt from separate ESP and PCI sources
esp-pci.c: synchronise setting of DMA_STAT_DONE with ESP completion
interrupt
esp-pci.c: set DMA_STAT_BCMBLT when BLAST command issued
hw/scsi/esp-pci.c | 61 +++++++++++++++++++++++++++++++----------------
1 file changed, 41 insertions(+), 20 deletions(-)
--
2.39.2
12.01.2024 16:15, Mark Cave-Ayland: > This series contains fixes for the esp-pci device (am53c974 or dc390) for a > few issues spotted whilst testing the previous ESP series. > > Patches 1-3 are fixes for issues found by Helge/Guenter whilst testing the > hppa C3700 machine with the amd53c974/dc390 devices under Linux, whilst patch > 4 fixes an issue that was exposed by testing MS-DOS and Windows drivers. > > With this series applied on top of the reworked ESP device, it is possible to > boot Linux under qemu-system-hppa without any errors and also boot and install > Win98SE from a DC390 PCI SCSI controller (no IDE!) using an MS-DOS boot floppy. > > Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> > Based-on: 20240112125420.514425-1-mark.cave-ayland@ilande.co.uk > > > Mark Cave-Ayland (4): > esp-pci.c: use correct address register for PCI DMA transfers > esp-pci.c: generate PCI interrupt from separate ESP and PCI sources > esp-pci.c: synchronise setting of DMA_STAT_DONE with ESP completion > interrupt > esp-pci.c: set DMA_STAT_BCMBLT when BLAST command issued Is it worth to pick up for stable? Especially the first one. It's interesting this bug is here for a very long time.. :) Thanks, /mjt
On 20/01/2024 13:09, Michael Tokarev wrote: > 12.01.2024 16:15, Mark Cave-Ayland: >> This series contains fixes for the esp-pci device (am53c974 or dc390) for a >> few issues spotted whilst testing the previous ESP series. >> >> Patches 1-3 are fixes for issues found by Helge/Guenter whilst testing the >> hppa C3700 machine with the amd53c974/dc390 devices under Linux, whilst patch >> 4 fixes an issue that was exposed by testing MS-DOS and Windows drivers. >> >> With this series applied on top of the reworked ESP device, it is possible to >> boot Linux under qemu-system-hppa without any errors and also boot and install >> Win98SE from a DC390 PCI SCSI controller (no IDE!) using an MS-DOS boot floppy. >> >> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> >> Based-on: 20240112125420.514425-1-mark.cave-ayland@ilande.co.uk >> >> >> Mark Cave-Ayland (4): >> esp-pci.c: use correct address register for PCI DMA transfers >> esp-pci.c: generate PCI interrupt from separate ESP and PCI sources >> esp-pci.c: synchronise setting of DMA_STAT_DONE with ESP completion >> interrupt >> esp-pci.c: set DMA_STAT_BCMBLT when BLAST command issued > > Is it worth to pick up for stable? Especially the first one. > It's interesting this bug is here for a very long time.. :) Good question! I did my comprehensive boot tests with this series on top of the core ESP series so I can't say that I've tested this series on its own. Then again other than the DMA_STAT_DONE patch which is a timing change, the rest of the patches are fixing specific edge cases which were already broken so I would be surprised if anything broke. ATB, Mark.
On 1/20/24 05:09, Michael Tokarev wrote: > 12.01.2024 16:15, Mark Cave-Ayland: >> This series contains fixes for the esp-pci device (am53c974 or dc390) for a >> few issues spotted whilst testing the previous ESP series. >> >> Patches 1-3 are fixes for issues found by Helge/Guenter whilst testing the >> hppa C3700 machine with the amd53c974/dc390 devices under Linux, whilst patch >> 4 fixes an issue that was exposed by testing MS-DOS and Windows drivers. >> >> With this series applied on top of the reworked ESP device, it is possible to >> boot Linux under qemu-system-hppa without any errors and also boot and install >> Win98SE from a DC390 PCI SCSI controller (no IDE!) using an MS-DOS boot floppy. >> >> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> >> Based-on: 20240112125420.514425-1-mark.cave-ayland@ilande.co.uk >> >> >> Mark Cave-Ayland (4): >> esp-pci.c: use correct address register for PCI DMA transfers >> esp-pci.c: generate PCI interrupt from separate ESP and PCI sources >> esp-pci.c: synchronise setting of DMA_STAT_DONE with ESP completion >> interrupt >> esp-pci.c: set DMA_STAT_BCMBLT when BLAST command issued > > Is it worth to pick up for stable? Especially the first one. > It's interesting this bug is here for a very long time.. :) > FWIW, I never observed the first one with Linux. I had carried variants of the other three in my tree for a long time, but they were never in a shape to be sent upstream and I never bothered trying to find the root cause. All those _can_ be observed when booting Linux. So, if anything, I'd argue that they should all be taken into stable releases. Thanks, Guenter
On 12/1/24 14:15, Mark Cave-Ayland wrote: > This series contains fixes for the esp-pci device (am53c974 or dc390) for a > few issues spotted whilst testing the previous ESP series. > > Patches 1-3 are fixes for issues found by Helge/Guenter whilst testing the > hppa C3700 machine with the amd53c974/dc390 devices under Linux, whilst patch > 4 fixes an issue that was exposed by testing MS-DOS and Windows drivers. > > With this series applied on top of the reworked ESP device, it is possible to > boot Linux under qemu-system-hppa without any errors and also boot and install > Win98SE from a DC390 PCI SCSI controller (no IDE!) using an MS-DOS boot floppy. > > Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> > Based-on: 20240112125420.514425-1-mark.cave-ayland@ilande.co.uk > > > Mark Cave-Ayland (4): > esp-pci.c: use correct address register for PCI DMA transfers > esp-pci.c: generate PCI interrupt from separate ESP and PCI sources > esp-pci.c: synchronise setting of DMA_STAT_DONE with ESP completion > interrupt > esp-pci.c: set DMA_STAT_BCMBLT when BLAST command issued > > hw/scsi/esp-pci.c | 61 +++++++++++++++++++++++++++++++---------------- > 1 file changed, 41 insertions(+), 20 deletions(-) Series queued to my hw-misc tree, thanks!
© 2016 - 2024 Red Hat, Inc.