[PATCH 12/88] esp.c: don't accumulate directly into cmdfifo

Mark Cave-Ayland posted 88 patches 10 months ago
Maintainers: Paolo Bonzini <pbonzini@redhat.com>, Fam Zheng <fam@euphon.net>
[PATCH 12/88] esp.c: don't accumulate directly into cmdfifo
Posted by Mark Cave-Ayland 10 months ago
Instead accumulate in the real FIFO as done in real hardware, and then transfer
to cmdfifo when we're ready to process the MESSAGE OUT and COMMAND phase data.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/scsi/esp.c | 49 ++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 42 insertions(+), 7 deletions(-)

diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index 6191c17f10..9e9bbe8431 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -199,11 +199,7 @@ static void esp_pdma_write(ESPState *s, uint8_t val)
         return;
     }
 
-    if (s->do_cmd) {
-        esp_fifo_push(&s->cmdfifo, val);
-    } else {
-        esp_fifo_push(&s->fifo, val);
-    }
+    esp_fifo_push(&s->fifo, val);
 
     dmalen--;
     esp_set_tc(s, dmalen);
@@ -358,6 +354,14 @@ static void do_cmd(ESPState *s)
 
 static void satn_pdma_cb(ESPState *s)
 {
+    uint8_t buf[ESP_FIFO_SZ];
+    int n;
+
+    /* Copy FIFO into cmdfifo */
+    n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
+    n = MIN(fifo8_num_free(&s->cmdfifo), n);
+    fifo8_push_all(&s->cmdfifo, buf, n);
+
     if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
         s->cmdfifo_cdb_offset = 1;
         s->do_cmd = 0;
@@ -395,6 +399,14 @@ static void handle_satn(ESPState *s)
 
 static void s_without_satn_pdma_cb(ESPState *s)
 {
+    uint8_t buf[ESP_FIFO_SZ];
+    int n;
+
+    /* Copy FIFO into cmdfifo */
+    n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
+    n = MIN(fifo8_num_free(&s->cmdfifo), n);
+    fifo8_push_all(&s->cmdfifo, buf, n);
+
     if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
         s->cmdfifo_cdb_offset = 0;
         s->do_cmd = 0;
@@ -432,6 +444,14 @@ static void handle_s_without_atn(ESPState *s)
 
 static void satn_stop_pdma_cb(ESPState *s)
 {
+    uint8_t buf[ESP_FIFO_SZ];
+    int n;
+
+    /* Copy FIFO into cmdfifo */
+    n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
+    n = MIN(fifo8_num_free(&s->cmdfifo), n);
+    fifo8_push_all(&s->cmdfifo, buf, n);
+
     if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
         trace_esp_handle_satn_stop(fifo8_num_used(&s->cmdfifo));
         s->do_cmd = 1;
@@ -523,10 +543,16 @@ static void esp_dma_done(ESPState *s)
 static void do_dma_pdma_cb(ESPState *s)
 {
     int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
+    uint8_t buf[ESP_CMDFIFO_SZ];
     int len;
     uint32_t n;
 
     if (s->do_cmd) {
+        /* Copy FIFO into cmdfifo */
+        n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
+        n = MIN(fifo8_num_free(&s->cmdfifo), n);
+        fifo8_push_all(&s->cmdfifo, buf, n);
+
         /* Ensure we have received complete command after SATN and stop */
         if (esp_get_tc(s) || fifo8_is_empty(&s->cmdfifo)) {
             return;
@@ -754,10 +780,16 @@ static void esp_do_dma(ESPState *s)
 static void esp_do_nodma(ESPState *s)
 {
     int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
+    uint8_t buf[ESP_FIFO_SZ];
     uint32_t cmdlen;
-    int len;
+    int len, n;
 
     if (s->do_cmd) {
+        /* Copy FIFO into cmdfifo */
+        n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
+        n = MIN(fifo8_num_free(&s->cmdfifo), n);
+        fifo8_push_all(&s->cmdfifo, buf, n);
+
         cmdlen = fifo8_num_used(&s->cmdfifo);
         trace_esp_handle_ti_cmd(cmdlen);
         s->ti_size = 0;
@@ -1159,7 +1191,10 @@ void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val)
         break;
     case ESP_FIFO:
         if (s->do_cmd) {
-            esp_fifo_push(&s->cmdfifo, val);
+            if (!fifo8_is_full(&s->fifo)) {
+                esp_fifo_push(&s->fifo, val);
+                esp_fifo_push(&s->cmdfifo, fifo8_pop(&s->fifo));
+            }
 
             /*
              * If any unexpected message out/command phase data is
-- 
2.39.2