[PULL 00/41] target-arm queue

Failed in applying to current master (apply log)
Maintainers: Alexandre Iooss <erdnaxe@crans.org>, Peter Maydell <peter.maydell@linaro.org>, Paolo Bonzini <pbonzini@redhat.com>, Arnaud Minier <arnaud.minier@telecom-paris.fr>, "Inès Varhol" <ines.varhol@telecom-paris.fr>, Jean-Christophe Dubois <jcd@tribudubois.net>, Subbaraya Sundeep <sundeep.lkml@gmail.com>, Alistair Francis <alistair@alistair23.me>, Felipe Balbi <balbi@kernel.org>
There is a newer version of this series
MAINTAINERS                             |  15 ++
docs/system/arm/b-l475e-iot01a.rst      |  46 +++++
docs/system/arm/emulation.rst           |   2 +
docs/system/arm/stm32.rst               |   6 +-
docs/system/target-arm.rst              |   1 +
configs/devices/arm-softmmu/default.mak |   1 +
include/hw/arm/armv7m.h                 |   1 +
include/hw/arm/stm32l4x5_soc.h          |  57 ++++++
target/arm/cpregs.h                     |  54 +++++-
target/arm/cpu-features.h               |  10 +
target/arm/cpu.h                        |  24 ++-
target/arm/syndrome.h                   |  20 +-
target/arm/tcg/translate.h              |  16 +-
hw/arm/armv7m.c                         |   2 +
hw/arm/b-l475e-iot01a.c                 |  72 +++++++
hw/arm/fsl-imx6.c                       |   3 +
hw/arm/msf2-som.c                       |   1 +
hw/arm/netduino2.c                      |   1 +
hw/arm/netduinoplus2.c                  |   1 +
hw/arm/olimex-stm32-h405.c              |   1 +
hw/arm/stellaris.c                      |   2 +
hw/arm/stm32f100_soc.c                  |   1 +
hw/arm/stm32f205_soc.c                  |   1 +
hw/arm/stm32f405_soc.c                  |   1 +
hw/arm/stm32l4x5_soc.c                  | 266 ++++++++++++++++++++++++++
hw/arm/stm32vldiscovery.c               |   1 +
hw/intc/arm_gicv3_cpuif.c               |  28 ++-
hw/intc/armv7m_nvic.c                   |  23 ++-
target/arm/cpu.c                        |   8 +-
target/arm/debug_helper.c               |  13 +-
target/arm/helper.c                     | 326 +++++++++++++++++++++++++++++---
target/arm/ptw.c                        |  21 ++
target/arm/tcg/cpu64.c                  |  11 ++
target/arm/tcg/hflags.c                 |  30 ++-
target/arm/tcg/op_helper.c              |  16 +-
target/arm/tcg/tlb_helper.c             |  27 ++-
target/arm/tcg/translate-a64.c          | 160 ++++++++++++++--
hw/arm/Kconfig                          |  12 ++
hw/arm/meson.build                      |   2 +
39 files changed, 1203 insertions(+), 80 deletions(-)
create mode 100644 docs/system/arm/b-l475e-iot01a.rst
create mode 100644 include/hw/arm/stm32l4x5_soc.h
create mode 100644 hw/arm/b-l475e-iot01a.c
create mode 100644 hw/arm/stm32l4x5_soc.c
[PULL 00/41] target-arm queue
Posted by Peter Maydell 10 months ago
Mostly my FEAT_NV/NV2 stuff, but some other smaller series too.

-- PMM

The following changes since commit 9468484fe904ab4691de6d9c34616667f377ceac:

  Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2024-01-09 10:32:23 +0000)

are available in the Git repository at:

  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240111

for you to fetch changes up to e2862554c257e908a3833265e38365e794abd362:

  target/arm: Add FEAT_NV2 to max, neoverse-n2, neoverse-v1 CPUs (2024-01-09 14:44:45 +0000)

----------------------------------------------------------------
target-arm queue:
 * Emulate FEAT_NV, FEAT_NV2
 * add cache controller for Freescale i.MX6
 * Add minimal support for the B-L475E-IOT01A board
 * Allow SoC models to configure M-profile CPUs with correct number
   of NVIC priority bits
 * Add missing QOM parent for v7-M SoCs
 * Set CTR_EL0.{IDC,DIC} for the 'max' CPU
 * hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers

----------------------------------------------------------------
Inès Varhol (2):
      hw/arm: Add minimal support for the STM32L4x5 SoC
      hw/arm: Add minimal support for the B-L475E-IOT01A board

Nikita Ostrenkov (1):
      hw/arm: add cache controller for Freescale i.MX6

Peter Maydell (34):
      target/arm: Set CTR_EL0.{IDC,DIC} for the 'max' CPU
      hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers
      target/arm: Handle HCR_EL2 accesses for bits introduced with FEAT_NV
      target/arm: Implement HCR_EL2.AT handling
      target/arm: Enable trapping of ERET for FEAT_NV
      target/arm: Always honour HCR_EL2.TSC when HCR_EL2.NV is set
      target/arm: Allow use of upper 32 bits of TBFLAG_A64
      target/arm: Record correct opcode fields in cpreg for E2H aliases
      target/arm: *_EL12 registers should UNDEF when HCR_EL2.E2H is 0
      target/arm: Make EL2 cpreg accessfns safe for FEAT_NV EL1 accesses
      target/arm: Move FPU/SVE/SME access checks up above ARM_CP_SPECIAL_MASK check
      target/arm: Trap sysreg accesses for FEAT_NV
      target/arm: Make NV reads of CurrentEL return EL2
      target/arm: Set SPSR_EL1.M correctly when nested virt is enabled
      target/arm: Trap registers when HCR_EL2.{NV, NV1} == {1, 1}
      target/arm: Always use arm_pan_enabled() when checking if PAN is enabled
      target/arm: Don't honour PSTATE.PAN when HCR_EL2.{NV, NV1} == {1, 1}
      target/arm: Treat LDTR* and STTR* as LDR/STR when NV, NV1 is 1, 1
      target/arm: Handle FEAT_NV page table attribute changes
      target/arm: Add FEAT_NV to max, neoverse-n2, neoverse-v1 CPUs
      target/arm: Handle HCR_EL2 accesses for FEAT_NV2 bits
      target/arm: Implement VNCR_EL2 register
      target/arm: Handle FEAT_NV2 changes to when SPSR_EL1.M reports EL2
      target/arm: Handle FEAT_NV2 redirection of SPSR_EL2, ELR_EL2, ESR_EL2, FAR_EL2
      target/arm: Implement FEAT_NV2 redirection of sysregs to RAM
      target/arm: Report VNCR_EL2 based faults correctly
      target/arm: Mark up VNCR offsets (offsets 0x0..0xff)
      target/arm: Mark up VNCR offsets (offsets 0x100..0x160)
      target/arm: Mark up VNCR offsets (offsets 0x168..0x1f8)
      target/arm: Mark up VNCR offsets (offsets >= 0x200, except GIC)
      hw/intc/arm_gicv3_cpuif: Mark up VNCR offsets for GIC CPU registers
      target/arm: Report HCR_EL2.{NV,NV1,NV2} in cpu dumps
      target/arm: Enhance CPU_LOG_INT to show SPSR on AArch64 exception-entry
      target/arm: Add FEAT_NV2 to max, neoverse-n2, neoverse-v1 CPUs

Philippe Mathieu-Daudé (1):
      hw/arm: Add missing QOM parent for v7-M SoCs

Samuel Tardieu (3):
      hw/intc/armv7m_nvic: add "num-prio-bits" property
      hw/arm/armv7m: alias the NVIC "num-prio-bits" property
      hw/arm/socs: configure priority bits for existing SOCs

 MAINTAINERS                             |  15 ++
 docs/system/arm/b-l475e-iot01a.rst      |  46 +++++
 docs/system/arm/emulation.rst           |   2 +
 docs/system/arm/stm32.rst               |   6 +-
 docs/system/target-arm.rst              |   1 +
 configs/devices/arm-softmmu/default.mak |   1 +
 include/hw/arm/armv7m.h                 |   1 +
 include/hw/arm/stm32l4x5_soc.h          |  57 ++++++
 target/arm/cpregs.h                     |  54 +++++-
 target/arm/cpu-features.h               |  10 +
 target/arm/cpu.h                        |  24 ++-
 target/arm/syndrome.h                   |  20 +-
 target/arm/tcg/translate.h              |  16 +-
 hw/arm/armv7m.c                         |   2 +
 hw/arm/b-l475e-iot01a.c                 |  72 +++++++
 hw/arm/fsl-imx6.c                       |   3 +
 hw/arm/msf2-som.c                       |   1 +
 hw/arm/netduino2.c                      |   1 +
 hw/arm/netduinoplus2.c                  |   1 +
 hw/arm/olimex-stm32-h405.c              |   1 +
 hw/arm/stellaris.c                      |   2 +
 hw/arm/stm32f100_soc.c                  |   1 +
 hw/arm/stm32f205_soc.c                  |   1 +
 hw/arm/stm32f405_soc.c                  |   1 +
 hw/arm/stm32l4x5_soc.c                  | 266 ++++++++++++++++++++++++++
 hw/arm/stm32vldiscovery.c               |   1 +
 hw/intc/arm_gicv3_cpuif.c               |  28 ++-
 hw/intc/armv7m_nvic.c                   |  23 ++-
 target/arm/cpu.c                        |   8 +-
 target/arm/debug_helper.c               |  13 +-
 target/arm/helper.c                     | 326 +++++++++++++++++++++++++++++---
 target/arm/ptw.c                        |  21 ++
 target/arm/tcg/cpu64.c                  |  11 ++
 target/arm/tcg/hflags.c                 |  30 ++-
 target/arm/tcg/op_helper.c              |  16 +-
 target/arm/tcg/tlb_helper.c             |  27 ++-
 target/arm/tcg/translate-a64.c          | 160 ++++++++++++++--
 hw/arm/Kconfig                          |  12 ++
 hw/arm/meson.build                      |   2 +
 39 files changed, 1203 insertions(+), 80 deletions(-)
 create mode 100644 docs/system/arm/b-l475e-iot01a.rst
 create mode 100644 include/hw/arm/stm32l4x5_soc.h
 create mode 100644 hw/arm/b-l475e-iot01a.c
 create mode 100644 hw/arm/stm32l4x5_soc.c

Re: [PULL 00/41] target-arm queue
Posted by Peter Maydell 10 months ago
On Thu, 11 Jan 2024 at 11:05, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> Mostly my FEAT_NV/NV2 stuff, but some other smaller series too.
>
> -- PMM
>
> The following changes since commit 9468484fe904ab4691de6d9c34616667f377ceac:
>
>   Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2024-01-09 10:32:23 +0000)
>
> are available in the Git repository at:
>
>   https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240111
>
> for you to fetch changes up to e2862554c257e908a3833265e38365e794abd362:
>
>   target/arm: Add FEAT_NV2 to max, neoverse-n2, neoverse-v1 CPUs (2024-01-09 14:44:45 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * Emulate FEAT_NV, FEAT_NV2
>  * add cache controller for Freescale i.MX6
>  * Add minimal support for the B-L475E-IOT01A board
>  * Allow SoC models to configure M-profile CPUs with correct number
>    of NVIC priority bits
>  * Add missing QOM parent for v7-M SoCs
>  * Set CTR_EL0.{IDC,DIC} for the 'max' CPU
>  * hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers
>
> ----------------------------------------------------------------


Applied, thanks.

Please update the changelog at https://wiki.qemu.org/ChangeLog/9.0
for any user-visible changes.

-- PMM