RISC-V should also generate the SPCR in a manner similar to ARM.
Therefore, instead of replicating the code, relocate this function
to the common AML build.

Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
---
 hw/acpi/aml-build.c         | 51 ++++++++++++++++++++++++++++
 hw/arm/virt-acpi-build.c    | 68 +++++++++++++++----------------------
 include/hw/acpi/acpi-defs.h | 33 ++++++++++++++++++
 include/hw/acpi/aml-build.h |  4 +++
 4 files changed, 115 insertions(+), 41 deletions(-)

diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
index af66bde0f5..1efa534aa8 100644
--- a/hw/acpi/aml-build.c
+++ b/hw/acpi/aml-build.c
@@ -1994,6 +1994,57 @@ static void build_processor_hierarchy_node(GArray *tbl, uint32_t flags,
     }
 }
 
+void build_spcr(GArray *table_data, BIOSLinker *linker,
+                const AcpiSpcrData *f, const char *oem_id,
+                const char *oem_table_id)
+{
+    AcpiTable table = { .sig = "SPCR", .rev = 2, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
+    /* Interface type */
+    build_append_int_noprefix(table_data, f->interface_type, 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 3);
+    /* Base Address */
+    build_append_gas(table_data, f->base_addr.id, f->base_addr.width,
+                     f->base_addr.offset, f->base_addr.size,
+                     f->base_addr.addr);
+    /* Interrupt type */
+    build_append_int_noprefix(table_data, f->interrupt_type, 1);
+    /* IRQ */
+    build_append_int_noprefix(table_data, f->pc_interrupt, 1);
+    /* Global System Interrupt */
+    build_append_int_noprefix(table_data, f->interrupt, 4);
+    /* Baud Rate */
+    build_append_int_noprefix(table_data, f->baud_rate, 1);
+    /* Parity */
+    build_append_int_noprefix(table_data, f->parity, 1);
+    /* Stop Bits */
+    build_append_int_noprefix(table_data, f->stop_bits, 1);
+    /* Flow Control */
+    build_append_int_noprefix(table_data, f->flow_control, 1);
+    /* Terminal Type */
+    build_append_int_noprefix(table_data, f->terminal_type, 1);
+    /* PCI Device ID  */
+    build_append_int_noprefix(table_data, f->pci_device_id, 2);
+    /* PCI Vendor ID */
+    build_append_int_noprefix(table_data, f->pci_vendor_id, 2);
+    /* PCI Bus Number */
+    build_append_int_noprefix(table_data, f->pci_bus, 1);
+    /* PCI Device Number */
+    build_append_int_noprefix(table_data, f->pci_device, 1);
+    /* PCI Function Number */
+    build_append_int_noprefix(table_data, f->pci_function, 1);
+    /* PCI Flags */
+    build_append_int_noprefix(table_data, f->pci_flags, 4);
+    /* PCI Segment */
+    build_append_int_noprefix(table_data, f->pci_segment, 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
+
+    acpi_table_end(linker, &table);
+}
 /*
  * ACPI spec, Revision 6.3
  * 5.2.29 Processor Properties Topology Table (PPTT)
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 510ab0dcca..a31f736d1a 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -431,48 +431,34 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
  * Rev: 1.07
  */
 static void
-build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
+build_spcr_v2(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiTable table = { .sig = "SPCR", .rev = 2, .oem_id = vms->oem_id,
-                        .oem_table_id = vms->oem_table_id };
-
-    acpi_table_begin(&table, table_data);
-
-    /* Interface Type */
-    build_append_int_noprefix(table_data, 3, 1); /* ARM PL011 UART */
-    build_append_int_noprefix(table_data, 0, 3); /* Reserved */
-    /* Base Address */
-    build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 32, 0, 3,
-                     vms->memmap[VIRT_UART].base);
-    /* Interrupt Type */
-    build_append_int_noprefix(table_data,
-        (1 << 3) /* Bit[3] ARMH GIC interrupt */, 1);
-    build_append_int_noprefix(table_data, 0, 1); /* IRQ */
-    /* Global System Interrupt */
-    build_append_int_noprefix(table_data,
-                              vms->irqmap[VIRT_UART] + ARM_SPI_BASE, 4);
-    build_append_int_noprefix(table_data, 3 /* 9600 */, 1); /* Baud Rate */
-    build_append_int_noprefix(table_data, 0 /* No Parity */, 1); /* Parity */
-    /* Stop Bits */
-    build_append_int_noprefix(table_data, 1 /* 1 Stop bit */, 1);
-    /* Flow Control */
-    build_append_int_noprefix(table_data,
-        (1 << 1) /* RTS/CTS hardware flow control */, 1);
-    /* Terminal Type */
-    build_append_int_noprefix(table_data, 0 /* VT100 */, 1);
-    build_append_int_noprefix(table_data, 0, 1); /* Language */
-    /* PCI Device ID  */
-    build_append_int_noprefix(table_data, 0xffff /* not a PCI device*/, 2);
-    /* PCI Vendor ID */
-    build_append_int_noprefix(table_data, 0xffff /* not a PCI device*/, 2);
-    build_append_int_noprefix(table_data, 0, 1); /* PCI Bus Number */
-    build_append_int_noprefix(table_data, 0, 1); /* PCI Device Number */
-    build_append_int_noprefix(table_data, 0, 1); /* PCI Function Number */
-    build_append_int_noprefix(table_data, 0, 4); /* PCI Flags */
-    build_append_int_noprefix(table_data, 0, 1); /* PCI Segment */
-    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    AcpiSpcrData serial = {
+        .interface_type = 3,       /* ARM PL011 UART */
+        .base_addr.id = AML_AS_SYSTEM_MEMORY,
+        .base_addr.width = 32,
+        .base_addr.offset = 0,
+        .base_addr.size = 3,
+        .base_addr.addr = vms->memmap[VIRT_UART].base,
+        .interrupt_type = (1 << 3),/* Bit[3] ARMH GIC interrupt*/
+        .pc_interrupt = 0,         /* IRQ */
+        .interrupt = (vms->irqmap[VIRT_UART] + ARM_SPI_BASE),
+        .baud_rate = 3,            /* 9600 */
+        .parity = 0,               /* No Parity */
+        .stop_bits = 1,            /* 1 Stop bit */
+        .flow_control = 1 << 1,    /* RTS/CTS hardware flow control */
+        .terminal_type = 0,        /* VT100 */
+        .language = 0,             /* Language */
+        .pci_device_id = 0xffff,   /* not a PCI device*/
+        .pci_vendor_id = 0xffff,   /* not a PCI device*/
+        .pci_bus = 0,
+        .pci_device = 0,
+        .pci_function = 0,
+        .pci_flags = 0,
+        .pci_segment = 0,
+    };
 
-    acpi_table_end(linker, &table);
+    build_spcr(table_data, linker, &serial, vms->oem_id, vms->oem_table_id);
 }
 
 /*
@@ -930,7 +916,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     }
 
     acpi_add_table(table_offsets, tables_blob);
-    build_spcr(tables_blob, tables->linker, vms);
+    build_spcr_v2(tables_blob, tables->linker, vms);
 
     acpi_add_table(table_offsets, tables_blob);
     build_dbg2(tables_blob, tables->linker, vms);
diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
index 2b42e4192b..0e6e82b339 100644
--- a/include/hw/acpi/acpi-defs.h
+++ b/include/hw/acpi/acpi-defs.h
@@ -90,6 +90,39 @@ typedef struct AcpiFadtData {
     unsigned *xdsdt_tbl_offset;
 } AcpiFadtData;
 
+typedef struct AcpiGas {
+    uint8_t id;                /* Address space ID */
+    uint8_t width;             /* Register bit width */
+    uint8_t offset;            /* Register bit offset */
+    uint8_t size;              /* Access size */
+    uint64_t addr;             /* Address */
+} AcpiGas;
+
+/* SPCR (Serial Port Console Redirection table) */
+typedef struct AcpiSpcrData {
+    uint8_t interface_type;
+    uint8_t reserved[3];
+    struct AcpiGas base_addr;
+    uint8_t interrupt_type;
+    uint8_t pc_interrupt;
+    uint32_t interrupt;        /* Global system interrupt */
+    uint8_t baud_rate;
+    uint8_t parity;
+    uint8_t stop_bits;
+    uint8_t flow_control;
+    uint8_t terminal_type;
+    uint8_t language;
+    uint8_t reserved1;
+    uint16_t pci_device_id;    /* Must be 0xffff if not PCI device */
+    uint16_t pci_vendor_id;    /* Must be 0xffff if not PCI device */
+    uint8_t pci_bus;
+    uint8_t pci_device;
+    uint8_t pci_function;
+    uint32_t pci_flags;
+    uint8_t pci_segment;
+    uint32_t reserved2;
+} AcpiSpcrData;
+
 #define ACPI_FADT_ARM_PSCI_COMPLIANT  (1 << 0)
 #define ACPI_FADT_ARM_PSCI_USE_HVC    (1 << 1)
 
diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
index ff2a310270..44e03e76bd 100644
--- a/include/hw/acpi/aml-build.h
+++ b/include/hw/acpi/aml-build.h
@@ -497,4 +497,8 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
 
 void build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
                 const char *oem_id, const char *oem_table_id);
+
+void build_spcr(GArray *table_data, BIOSLinker *linker,
+                const AcpiSpcrData *f, const char *oem_id,
+                const char *oem_table_id);
 #endif
-- 
2.34.1