This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The LBUS is modelled to maintain mapped memory for the devices. The
memory is mapped after CFAM config, peek table and FSI slave registers.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
[ clg: - removed lbus_add_device() bc unused
- removed lbus_create_device() bc used only once
- removed "address" property
- updated meson.build to build fsi dir
- included an empty hw/fsi/trace-events ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
meson.build | 1 +
hw/fsi/trace.h | 1 +
include/hw/fsi/lbus.h | 40 +++++++++++++++++++++++++++++++++
hw/fsi/lbus.c | 51 +++++++++++++++++++++++++++++++++++++++++++
hw/Kconfig | 1 +
hw/fsi/Kconfig | 2 ++
hw/fsi/meson.build | 1 +
hw/fsi/trace-events | 1 +
hw/meson.build | 1 +
9 files changed, 99 insertions(+)
create mode 100644 hw/fsi/trace.h
create mode 100644 include/hw/fsi/lbus.h
create mode 100644 hw/fsi/lbus.c
create mode 100644 hw/fsi/Kconfig
create mode 100644 hw/fsi/meson.build
create mode 100644 hw/fsi/trace-events
diff --git a/meson.build b/meson.build
index ec01f8b138..b6556efd51 100644
--- a/meson.build
+++ b/meson.build
@@ -3298,6 +3298,7 @@ if have_system
'hw/char',
'hw/display',
'hw/dma',
+ 'hw/fsi',
'hw/hyperv',
'hw/i2c',
'hw/i386',
diff --git a/hw/fsi/trace.h b/hw/fsi/trace.h
new file mode 100644
index 0000000000..ee67c7fb04
--- /dev/null
+++ b/hw/fsi/trace.h
@@ -0,0 +1 @@
+#include "trace/trace-hw_fsi.h"
diff --git a/include/hw/fsi/lbus.h b/include/hw/fsi/lbus.h
new file mode 100644
index 0000000000..a58e33d061
--- /dev/null
+++ b/include/hw/fsi/lbus.h
@@ -0,0 +1,40 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2023 IBM Corp.
+ *
+ * IBM Local bus and connected device structures.
+ */
+#ifndef FSI_LBUS_H
+#define FSI_LBUS_H
+
+#include "exec/memory.h"
+#include "hw/qdev-core.h"
+
+#define TYPE_FSI_LBUS_DEVICE "fsi.lbus.device"
+OBJECT_DECLARE_TYPE(FSILBusDevice, FSILBusDeviceClass, FSI_LBUS_DEVICE)
+
+#define FSI_LBUS_MEM_REGION_SIZE (2 * 1024 * 1024)
+#define FSI_LBUSDEV_IOMEM_START 0xc00 /* 3K used by CFAM config etc */
+
+typedef struct FSILBusDevice {
+ DeviceState parent;
+
+ MemoryRegion iomem;
+} FSILBusDevice;
+
+typedef struct FSILBusDeviceClass {
+ DeviceClass parent;
+
+ uint32_t config;
+} FSILBusDeviceClass;
+
+#define TYPE_FSI_LBUS "fsi.lbus"
+OBJECT_DECLARE_SIMPLE_TYPE(FSILBus, FSI_LBUS)
+
+typedef struct FSILBus {
+ BusState bus;
+
+ MemoryRegion mr;
+} FSILBus;
+
+#endif /* FSI_LBUS_H */
diff --git a/hw/fsi/lbus.c b/hw/fsi/lbus.c
new file mode 100644
index 0000000000..84c46a00d7
--- /dev/null
+++ b/hw/fsi/lbus.c
@@ -0,0 +1,51 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2023 IBM Corp.
+ *
+ * IBM Local bus where FSI slaves are connected
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/fsi/lbus.h"
+
+#include "hw/qdev-properties.h"
+
+static void lbus_init(Object *o)
+{
+ FSILBus *lbus = FSI_LBUS(o);
+
+ memory_region_init(&lbus->mr, OBJECT(lbus), TYPE_FSI_LBUS,
+ FSI_LBUS_MEM_REGION_SIZE - FSI_LBUSDEV_IOMEM_START);
+}
+
+static const TypeInfo lbus_info = {
+ .name = TYPE_FSI_LBUS,
+ .parent = TYPE_BUS,
+ .instance_init = lbus_init,
+ .instance_size = sizeof(FSILBus),
+};
+
+static void lbus_device_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->bus_type = TYPE_FSI_LBUS;
+}
+
+static const TypeInfo lbus_device_type_info = {
+ .name = TYPE_FSI_LBUS_DEVICE,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(FSILBusDevice),
+ .abstract = true,
+ .class_init = lbus_device_class_init,
+ .class_size = sizeof(FSILBusDeviceClass),
+};
+
+static void lbus_register_types(void)
+{
+ type_register_static(&lbus_info);
+ type_register_static(&lbus_device_type_info);
+}
+
+type_init(lbus_register_types);
diff --git a/hw/Kconfig b/hw/Kconfig
index 9ca7b38c31..2c00936c28 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -9,6 +9,7 @@ source core/Kconfig
source cxl/Kconfig
source display/Kconfig
source dma/Kconfig
+source fsi/Kconfig
source gpio/Kconfig
source hyperv/Kconfig
source i2c/Kconfig
diff --git a/hw/fsi/Kconfig b/hw/fsi/Kconfig
new file mode 100644
index 0000000000..e650c660f0
--- /dev/null
+++ b/hw/fsi/Kconfig
@@ -0,0 +1,2 @@
+config FSI_LBUS
+ bool
diff --git a/hw/fsi/meson.build b/hw/fsi/meson.build
new file mode 100644
index 0000000000..4074d3a7d2
--- /dev/null
+++ b/hw/fsi/meson.build
@@ -0,0 +1 @@
+system_ss.add(when: 'CONFIG_FSI_LBUS', if_true: files('lbus.c'))
diff --git a/hw/fsi/trace-events b/hw/fsi/trace-events
new file mode 100644
index 0000000000..8b13789179
--- /dev/null
+++ b/hw/fsi/trace-events
@@ -0,0 +1 @@
+
diff --git a/hw/meson.build b/hw/meson.build
index f01fac4617..463d702683 100644
--- a/hw/meson.build
+++ b/hw/meson.build
@@ -44,6 +44,7 @@ subdir('virtio')
subdir('watchdog')
subdir('xen')
subdir('xenpv')
+subdir('fsi')
subdir('alpha')
subdir('arm')
--
2.39.2
On 11/29/23 00:56, Ninad Palsule wrote:
> This is a part of patchset where IBM's Flexible Service Interface is
> introduced.
>
> The LBUS is modelled to maintain mapped memory for the devices. The
> memory is mapped after CFAM config, peek table and FSI slave registers.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
> [ clg: - removed lbus_add_device() bc unused
> - removed lbus_create_device() bc used only once
> - removed "address" property
> - updated meson.build to build fsi dir
> - included an empty hw/fsi/trace-events ]
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
> meson.build | 1 +
> hw/fsi/trace.h | 1 +
> include/hw/fsi/lbus.h | 40 +++++++++++++++++++++++++++++++++
> hw/fsi/lbus.c | 51 +++++++++++++++++++++++++++++++++++++++++++
> hw/Kconfig | 1 +
> hw/fsi/Kconfig | 2 ++
> hw/fsi/meson.build | 1 +
> hw/fsi/trace-events | 1 +
> hw/meson.build | 1 +
> 9 files changed, 99 insertions(+)
> create mode 100644 hw/fsi/trace.h
> create mode 100644 include/hw/fsi/lbus.h
> create mode 100644 hw/fsi/lbus.c
> create mode 100644 hw/fsi/Kconfig
> create mode 100644 hw/fsi/meson.build
> create mode 100644 hw/fsi/trace-events
>
> diff --git a/meson.build b/meson.build
> index ec01f8b138..b6556efd51 100644
> --- a/meson.build
> +++ b/meson.build
> @@ -3298,6 +3298,7 @@ if have_system
> 'hw/char',
> 'hw/display',
> 'hw/dma',
> + 'hw/fsi',
> 'hw/hyperv',
> 'hw/i2c',
> 'hw/i386',
> diff --git a/hw/fsi/trace.h b/hw/fsi/trace.h
> new file mode 100644
> index 0000000000..ee67c7fb04
> --- /dev/null
> +++ b/hw/fsi/trace.h
> @@ -0,0 +1 @@
> +#include "trace/trace-hw_fsi.h"
> diff --git a/include/hw/fsi/lbus.h b/include/hw/fsi/lbus.h
> new file mode 100644
> index 0000000000..a58e33d061
> --- /dev/null
> +++ b/include/hw/fsi/lbus.h
> @@ -0,0 +1,40 @@
> +/*
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + * Copyright (C) 2023 IBM Corp.
> + *
> + * IBM Local bus and connected device structures.
> + */
> +#ifndef FSI_LBUS_H
> +#define FSI_LBUS_H
> +
> +#include "exec/memory.h"
> +#include "hw/qdev-core.h"
> +
> +#define TYPE_FSI_LBUS_DEVICE "fsi.lbus.device"
> +OBJECT_DECLARE_TYPE(FSILBusDevice, FSILBusDeviceClass, FSI_LBUS_DEVICE)
> +
> +#define FSI_LBUS_MEM_REGION_SIZE (2 * 1024 * 1024)
> +#define FSI_LBUSDEV_IOMEM_START 0xc00 /* 3K used by CFAM config etc */
I don't think sizing the local bus MMIO region exactly to the size of
the CFAM MMIO region is necessary. The upper LBUS/CFAM addresses might
not even be backed by device registers.
I would simplify with :
#define FSI_LBUS_MEM_REGION_SIZE (1 * MiB)
and forget about the offset.
Thanks,
C.
> +
> +typedef struct FSILBusDevice {
> + DeviceState parent;
> +
> + MemoryRegion iomem;
> +} FSILBusDevice;
> +
> +typedef struct FSILBusDeviceClass {
> + DeviceClass parent;
> +
> + uint32_t config;
> +} FSILBusDeviceClass;
> +
> +#define TYPE_FSI_LBUS "fsi.lbus"
> +OBJECT_DECLARE_SIMPLE_TYPE(FSILBus, FSI_LBUS)
> +
> +typedef struct FSILBus {
> + BusState bus;
> +
> + MemoryRegion mr;
> +} FSILBus;
> +
> +#endif /* FSI_LBUS_H */
> diff --git a/hw/fsi/lbus.c b/hw/fsi/lbus.c
> new file mode 100644
> index 0000000000..84c46a00d7
> --- /dev/null
> +++ b/hw/fsi/lbus.c
> @@ -0,0 +1,51 @@
> +/*
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + * Copyright (C) 2023 IBM Corp.
> + *
> + * IBM Local bus where FSI slaves are connected
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "hw/fsi/lbus.h"
> +
> +#include "hw/qdev-properties.h"
> +
> +static void lbus_init(Object *o)
> +{
> + FSILBus *lbus = FSI_LBUS(o);
> +
> + memory_region_init(&lbus->mr, OBJECT(lbus), TYPE_FSI_LBUS,
> + FSI_LBUS_MEM_REGION_SIZE - FSI_LBUSDEV_IOMEM_START);
> +}
> +
> +static const TypeInfo lbus_info = {
> + .name = TYPE_FSI_LBUS,
> + .parent = TYPE_BUS,
> + .instance_init = lbus_init,
> + .instance_size = sizeof(FSILBus),
> +};
> +
> +static void lbus_device_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> +
> + dc->bus_type = TYPE_FSI_LBUS;
> +}
> +
> +static const TypeInfo lbus_device_type_info = {
> + .name = TYPE_FSI_LBUS_DEVICE,
> + .parent = TYPE_DEVICE,
> + .instance_size = sizeof(FSILBusDevice),
> + .abstract = true,
> + .class_init = lbus_device_class_init,
> + .class_size = sizeof(FSILBusDeviceClass),
> +};
> +
> +static void lbus_register_types(void)
> +{
> + type_register_static(&lbus_info);
> + type_register_static(&lbus_device_type_info);
> +}
> +
> +type_init(lbus_register_types);
> diff --git a/hw/Kconfig b/hw/Kconfig
> index 9ca7b38c31..2c00936c28 100644
> --- a/hw/Kconfig
> +++ b/hw/Kconfig
> @@ -9,6 +9,7 @@ source core/Kconfig
> source cxl/Kconfig
> source display/Kconfig
> source dma/Kconfig
> +source fsi/Kconfig
> source gpio/Kconfig
> source hyperv/Kconfig
> source i2c/Kconfig
> diff --git a/hw/fsi/Kconfig b/hw/fsi/Kconfig
> new file mode 100644
> index 0000000000..e650c660f0
> --- /dev/null
> +++ b/hw/fsi/Kconfig
> @@ -0,0 +1,2 @@
> +config FSI_LBUS
> + bool
> diff --git a/hw/fsi/meson.build b/hw/fsi/meson.build
> new file mode 100644
> index 0000000000..4074d3a7d2
> --- /dev/null
> +++ b/hw/fsi/meson.build
> @@ -0,0 +1 @@
> +system_ss.add(when: 'CONFIG_FSI_LBUS', if_true: files('lbus.c'))
> diff --git a/hw/fsi/trace-events b/hw/fsi/trace-events
> new file mode 100644
> index 0000000000..8b13789179
> --- /dev/null
> +++ b/hw/fsi/trace-events
> @@ -0,0 +1 @@
> +
> diff --git a/hw/meson.build b/hw/meson.build
> index f01fac4617..463d702683 100644
> --- a/hw/meson.build
> +++ b/hw/meson.build
> @@ -44,6 +44,7 @@ subdir('virtio')
> subdir('watchdog')
> subdir('xen')
> subdir('xenpv')
> +subdir('fsi')
>
> subdir('alpha')
> subdir('arm')
Hello Cedric, On 12/12/23 08:46, Cédric Le Goater wrote: > On 11/29/23 00:56, Ninad Palsule wrote: >> This is a part of patchset where IBM's Flexible Service Interface is >> introduced. >> >> The LBUS is modelled to maintain mapped memory for the devices. The >> memory is mapped after CFAM config, peek table and FSI slave registers. >> >> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> >> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> >> [ clg: - removed lbus_add_device() bc unused >> - removed lbus_create_device() bc used only once >> - removed "address" property >> - updated meson.build to build fsi dir >> - included an empty hw/fsi/trace-events ] >> Signed-off-by: Cédric Le Goater <clg@kaod.org> >> --- >> meson.build | 1 + >> hw/fsi/trace.h | 1 + >> include/hw/fsi/lbus.h | 40 +++++++++++++++++++++++++++++++++ >> hw/fsi/lbus.c | 51 +++++++++++++++++++++++++++++++++++++++++++ >> hw/Kconfig | 1 + >> hw/fsi/Kconfig | 2 ++ >> hw/fsi/meson.build | 1 + >> hw/fsi/trace-events | 1 + >> hw/meson.build | 1 + >> 9 files changed, 99 insertions(+) >> create mode 100644 hw/fsi/trace.h >> create mode 100644 include/hw/fsi/lbus.h >> create mode 100644 hw/fsi/lbus.c >> create mode 100644 hw/fsi/Kconfig >> create mode 100644 hw/fsi/meson.build >> create mode 100644 hw/fsi/trace-events >> >> diff --git a/meson.build b/meson.build >> index ec01f8b138..b6556efd51 100644 >> --- a/meson.build >> +++ b/meson.build >> @@ -3298,6 +3298,7 @@ if have_system >> 'hw/char', >> 'hw/display', >> 'hw/dma', >> + 'hw/fsi', >> 'hw/hyperv', >> 'hw/i2c', >> 'hw/i386', >> diff --git a/hw/fsi/trace.h b/hw/fsi/trace.h >> new file mode 100644 >> index 0000000000..ee67c7fb04 >> --- /dev/null >> +++ b/hw/fsi/trace.h >> @@ -0,0 +1 @@ >> +#include "trace/trace-hw_fsi.h" >> diff --git a/include/hw/fsi/lbus.h b/include/hw/fsi/lbus.h >> new file mode 100644 >> index 0000000000..a58e33d061 >> --- /dev/null >> +++ b/include/hw/fsi/lbus.h >> @@ -0,0 +1,40 @@ >> +/* >> + * SPDX-License-Identifier: GPL-2.0-or-later >> + * Copyright (C) 2023 IBM Corp. >> + * >> + * IBM Local bus and connected device structures. >> + */ >> +#ifndef FSI_LBUS_H >> +#define FSI_LBUS_H >> + >> +#include "exec/memory.h" >> +#include "hw/qdev-core.h" >> + >> +#define TYPE_FSI_LBUS_DEVICE "fsi.lbus.device" >> +OBJECT_DECLARE_TYPE(FSILBusDevice, FSILBusDeviceClass, FSI_LBUS_DEVICE) >> + >> +#define FSI_LBUS_MEM_REGION_SIZE (2 * 1024 * 1024) >> +#define FSI_LBUSDEV_IOMEM_START 0xc00 /* 3K used by CFAM config >> etc */ > > I don't think sizing the local bus MMIO region exactly to the size of > the CFAM MMIO region is necessary. The upper LBUS/CFAM addresses might > not even be backed by device registers. > > I would simplify with : > > #define FSI_LBUS_MEM_REGION_SIZE (1 * MiB) > > and forget about the offset. > ok, I made it as 1MB. Thanks for the review. Regards, Ninad
© 2016 - 2024 Red Hat, Inc.