From: BALATON Zoltan <balaton@eik.bme.hu>

The chip has 4 pins (called PIRQA-D in VT82C686B and PINTA-D in
VT8231) that are meant to be connected to PCI IRQ lines and allow
routing PCI interrupts to the ISA PIC. Route these in
via_isa_set_irq() to make it possible to share them with internal
functions that can also be routed to the same ISA IRQs.

Fixes: 2fdadd02e675caca4aba4ae26317701fe2c4c901
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <8c4513d8b78fac40e6d4e65a0a4b3a7f2f278a4b.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/isa/vt82c686.c | 67 ++++++++++++++++++-----------------------------
 1 file changed, 25 insertions(+), 42 deletions(-)

diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index 6fad8293e6..a3eb6769fc 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -593,6 +593,21 @@ static const TypeInfo via_isa_info = {
     },
 };
 
+static int via_isa_get_pci_irq(const ViaISAState *s, int pin)
+{
+    switch (pin) {
+    case 0:
+        return s->dev.config[0x55] >> 4;
+    case 1:
+        return s->dev.config[0x56] & 0xf;
+    case 2:
+        return s->dev.config[0x56] >> 4;
+    case 3:
+        return s->dev.config[0x57] >> 4;
+    }
+    return 0;
+}
+
 void via_isa_set_irq(PCIDevice *d, int pin, int level)
 {
     ViaISAState *s = VIA_ISA(pci_get_function_0(d));
@@ -601,6 +616,10 @@ void via_isa_set_irq(PCIDevice *d, int pin, int level)
     uint16_t mask = BIT(f);
 
     switch (f) {
+    case 0: /* PIRQ/PINT inputs */
+        irq = via_isa_get_pci_irq(s, pin);
+        f = 8 + pin; /* Use function 8-11 for PCI interrupt inputs */
+        break;
     case 2: /* USB ports 0-1 */
     case 3: /* USB ports 2-3 */
         max_irq = 14;
@@ -633,52 +652,17 @@ void via_isa_set_irq(PCIDevice *d, int pin, int level)
     qemu_set_irq(s->isa_irqs_in[irq], !!s->irq_state[irq]);
 }
 
+static void via_isa_pirq(void *opaque, int pin, int level)
+{
+    via_isa_set_irq(opaque, pin, level);
+}
+
 static void via_isa_request_i8259_irq(void *opaque, int irq, int level)
 {
     ViaISAState *s = opaque;
     qemu_set_irq(s->cpu_intr, level);
 }
 
-static int via_isa_get_pci_irq(const ViaISAState *s, int irq_num)
-{
-    switch (irq_num) {
-    case 0:
-        return s->dev.config[0x55] >> 4;
-    case 1:
-        return s->dev.config[0x56] & 0xf;
-    case 2:
-        return s->dev.config[0x56] >> 4;
-    case 3:
-        return s->dev.config[0x57] >> 4;
-    }
-    return 0;
-}
-
-static void via_isa_set_pci_irq(void *opaque, int irq_num, int level)
-{
-    ViaISAState *s = opaque;
-    PCIBus *bus = pci_get_bus(&s->dev);
-    int i, pic_level, pic_irq = via_isa_get_pci_irq(s, irq_num);
-
-    /* IRQ 0: disabled, IRQ 2,8,13: reserved */
-    if (!pic_irq) {
-        return;
-    }
-    if (unlikely(pic_irq == 2 || pic_irq == 8 || pic_irq == 13)) {
-        qemu_log_mask(LOG_GUEST_ERROR, "Invalid ISA IRQ routing");
-    }
-
-    /* The pic level is the logical OR of all the PCI irqs mapped to it. */
-    pic_level = 0;
-    for (i = 0; i < PCI_NUM_PINS; i++) {
-        if (pic_irq == via_isa_get_pci_irq(s, i)) {
-            pic_level |= pci_bus_get_irq_level(bus, i);
-        }
-    }
-    /* Now we change the pic irq level according to the via irq mappings. */
-    qemu_set_irq(s->isa_irqs_in[pic_irq], pic_level);
-}
-
 static void via_isa_realize(PCIDevice *d, Error **errp)
 {
     ViaISAState *s = VIA_ISA(d);
@@ -689,6 +673,7 @@ static void via_isa_realize(PCIDevice *d, Error **errp)
     int i;
 
     qdev_init_gpio_out(dev, &s->cpu_intr, 1);
+    qdev_init_gpio_in_named(dev, via_isa_pirq, "pirq", PCI_NUM_PINS);
     isa_irq = qemu_allocate_irqs(via_isa_request_i8259_irq, s, 1);
     isa_bus = isa_bus_new(dev, pci_address_space(d), pci_address_space_io(d),
                           errp);
@@ -702,8 +687,6 @@ static void via_isa_realize(PCIDevice *d, Error **errp)
     i8254_pit_init(isa_bus, 0x40, 0, NULL);
     i8257_dma_init(isa_bus, 0);
 
-    qdev_init_gpio_in_named(dev, via_isa_set_pci_irq, "pirq", PCI_NUM_PINS);
-
     /* RTC */
     qdev_prop_set_int32(DEVICE(&s->rtc), "base_year", 2000);
     if (!qdev_realize(DEVICE(&s->rtc), BUS(isa_bus), errp)) {
-- 
2.41.0