Replace the return path retry logic with finishing and restarting the
thread. This fixes a race when resuming the migration that leads to a
segfault.
Currently when doing postcopy we consider that an IO error on the
return path file could be due to a network intermittency. We then keep
the thread alive but have it do cleanup of the 'from_dst_file' and
wait on the 'postcopy_pause_rp' semaphore. When the user issues a
migrate resume, a new return path is opened and the thread is allowed
to continue.
There's a race condition in the above mechanism. It is possible for
the new return path file to be setup *before* the cleanup code in the
return path thread has had a chance to run, leading to the *new* file
being closed and the pointer set to NULL. When the thread is released
after the resume, it tries to dereference 'from_dst_file' and crashes:
Thread 7 "return path" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffd1dbf700 (LWP 9611)]
0x00005555560e4893 in qemu_file_get_error_obj (f=0x0, errp=0x0) at ../migration/qemu-file.c:154
154 return f->last_error;
(gdb) bt
#0 0x00005555560e4893 in qemu_file_get_error_obj (f=0x0, errp=0x0) at ../migration/qemu-file.c:154
#1 0x00005555560e4983 in qemu_file_get_error (f=0x0) at ../migration/qemu-file.c:206
#2 0x0000555555b9a1df in source_return_path_thread (opaque=0x555556e06000) at ../migration/migration.c:1876
#3 0x000055555602e14f in qemu_thread_start (args=0x55555782e780) at ../util/qemu-thread-posix.c:541
#4 0x00007ffff38d76ea in start_thread (arg=0x7fffd1dbf700) at pthread_create.c:477
#5 0x00007ffff35efa6f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Here's the race (important bit is open_return_path happening before
migration_release_dst_files):
migration | qmp | return path
--------------------------+-----------------------------+---------------------------------
qmp_migrate_pause()
shutdown(ms->to_dst_file)
f->last_error = -EIO
migrate_detect_error()
postcopy_pause()
set_state(PAUSED)
wait(postcopy_pause_sem)
qmp_migrate(resume)
migrate_fd_connect()
resume = state == PAUSED
open_return_path <-- TOO SOON!
set_state(RECOVER)
post(postcopy_pause_sem)
(incoming closes to_src_file)
res = qemu_file_get_error(rp)
migration_release_dst_files()
ms->rp_state.from_dst_file = NULL
post(postcopy_pause_rp_sem)
postcopy_pause_return_path_thread()
wait(postcopy_pause_rp_sem)
rp = ms->rp_state.from_dst_file
goto retry
qemu_file_get_error(rp)
SIGSEGV
-------------------------------------------------------------------------------------------
We can keep the retry logic without having the thread alive and
waiting. The only piece of data used by it is the 'from_dst_file' and
it is only allowed to proceed after a migrate resume is issued and the
semaphore released at migrate_fd_connect().
Move the retry logic to outside the thread by waiting for the thread
to finish before pausing the migration.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
---
migration/migration.c | 60 ++++++++-----------------------------------
migration/migration.h | 1 -
2 files changed, 11 insertions(+), 50 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index f6c0250d33..af78f7ee54 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -1787,18 +1787,6 @@ static void migrate_handle_rp_req_pages(MigrationState *ms, const char* rbname,
}
}
-/* Return true to retry, false to quit */
-static bool postcopy_pause_return_path_thread(MigrationState *s)
-{
- trace_postcopy_pause_return_path();
-
- qemu_sem_wait(&s->postcopy_pause_rp_sem);
-
- trace_postcopy_pause_return_path_continued();
-
- return true;
-}
-
static int migrate_handle_rp_recv_bitmap(MigrationState *s, char *block_name)
{
RAMBlock *block = qemu_ram_block_by_name(block_name);
@@ -1882,7 +1870,6 @@ static void *source_return_path_thread(void *opaque)
trace_source_return_path_thread_entry();
rcu_register_thread();
-retry:
while (!ms->rp_state.error && !qemu_file_get_error(rp) &&
migration_is_setup_or_active(ms->state)) {
trace_source_return_path_thread_loop_top();
@@ -2004,26 +1991,7 @@ retry:
}
out:
- res = qemu_file_get_error(rp);
- if (res) {
- if (res && migration_in_postcopy()) {
- /*
- * Maybe there is something we can do: it looks like a
- * network down issue, and we pause for a recovery.
- */
- migration_release_dst_files(ms);
- rp = NULL;
- if (postcopy_pause_return_path_thread(ms)) {
- /*
- * Reload rp, reset the rest. Referencing it is safe since
- * it's reset only by us above, or when migration completes
- */
- rp = ms->rp_state.from_dst_file;
- ms->rp_state.error = false;
- goto retry;
- }
- }
-
+ if (qemu_file_get_error(rp)) {
trace_source_return_path_thread_bad_end();
mark_source_rp_bad(ms);
}
@@ -2034,8 +2002,7 @@ out:
return NULL;
}
-static int open_return_path_on_source(MigrationState *ms,
- bool create_thread)
+static int open_return_path_on_source(MigrationState *ms)
{
ms->rp_state.from_dst_file = qemu_file_get_return_path(ms->to_dst_file);
if (!ms->rp_state.from_dst_file) {
@@ -2044,11 +2011,6 @@ static int open_return_path_on_source(MigrationState *ms,
trace_open_return_path_on_source();
- if (!create_thread) {
- /* We're done */
- return 0;
- }
-
qemu_thread_create(&ms->rp_state.rp_thread, "return path",
source_return_path_thread, ms, QEMU_THREAD_JOINABLE);
ms->rp_state.rp_thread_created = true;
@@ -2088,6 +2050,7 @@ static int await_return_path_close_on_source(MigrationState *ms)
trace_await_return_path_close_on_source_close();
ret = ms->rp_state.error;
+ ms->rp_state.error = false;
trace_migration_return_path_end_after(ret);
return ret;
}
@@ -2563,6 +2526,13 @@ static MigThrError postcopy_pause(MigrationState *s)
qemu_file_shutdown(file);
qemu_fclose(file);
+ /*
+ * We're already pausing, so ignore any errors on the return
+ * path and just wait for the thread to finish. It will be
+ * re-created when we resume.
+ */
+ await_return_path_close_on_source(s);
+
migrate_set_state(&s->state, s->state,
MIGRATION_STATUS_POSTCOPY_PAUSED);
@@ -2580,12 +2550,6 @@ static MigThrError postcopy_pause(MigrationState *s)
if (s->state == MIGRATION_STATUS_POSTCOPY_RECOVER) {
/* Woken up by a recover procedure. Give it a shot */
- /*
- * Firstly, let's wake up the return path now, with a new
- * return path channel.
- */
- qemu_sem_post(&s->postcopy_pause_rp_sem);
-
/* Do the resume logic */
if (postcopy_do_resume(s) == 0) {
/* Let's continue! */
@@ -3275,7 +3239,7 @@ void migrate_fd_connect(MigrationState *s, Error *error_in)
* QEMU uses the return path.
*/
if (migrate_postcopy_ram() || migrate_return_path()) {
- if (open_return_path_on_source(s, !resume)) {
+ if (open_return_path_on_source(s)) {
error_setg(&local_err, "Unable to open return-path for postcopy");
migrate_set_state(&s->state, s->state, MIGRATION_STATUS_FAILED);
migrate_set_error(s, local_err);
@@ -3339,7 +3303,6 @@ static void migration_instance_finalize(Object *obj)
qemu_sem_destroy(&ms->rate_limit_sem);
qemu_sem_destroy(&ms->pause_sem);
qemu_sem_destroy(&ms->postcopy_pause_sem);
- qemu_sem_destroy(&ms->postcopy_pause_rp_sem);
qemu_sem_destroy(&ms->rp_state.rp_sem);
qemu_sem_destroy(&ms->rp_state.rp_pong_acks);
qemu_sem_destroy(&ms->postcopy_qemufile_src_sem);
@@ -3359,7 +3322,6 @@ static void migration_instance_init(Object *obj)
migrate_params_init(&ms->parameters);
qemu_sem_init(&ms->postcopy_pause_sem, 0);
- qemu_sem_init(&ms->postcopy_pause_rp_sem, 0);
qemu_sem_init(&ms->rp_state.rp_sem, 0);
qemu_sem_init(&ms->rp_state.rp_pong_acks, 0);
qemu_sem_init(&ms->rate_limit_sem, 0);
diff --git a/migration/migration.h b/migration/migration.h
index cdaa10d515..972597f4de 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -393,7 +393,6 @@ struct MigrationState {
/* Needed by postcopy-pause state */
QemuSemaphore postcopy_pause_sem;
- QemuSemaphore postcopy_pause_rp_sem;
/*
* Whether we abort the migration if decompression errors are
* detected at the destination. It is left at false for qemu
--
2.35.3
© 2016 - 2024 Red Hat, Inc.