Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
---
hw/i2c/pm_smbus.c | 2 +-
hw/i2c/pmbus_device.c | 2 +-
hw/i2c/smbus_slave.c | 2 +-
hw/ide/ahci_internal.h | 4 ++--
hw/ide/cmd646.c | 2 +-
hw/ide/core.c | 2 +-
hw/usb/ccid-card-emulated.c | 2 +-
hw/usb/hcd-ehci.c | 6 +++---
hw/usb/hcd-ohci.c | 2 +-
hw/usb/quirks.h | 2 +-
hw/usb/redirect.c | 2 +-
hw/usb/trace-events | 2 +-
hw/usb/xen-usb.c | 2 +-
13 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/hw/i2c/pm_smbus.c b/hw/i2c/pm_smbus.c
index d7eae548cb..9ad6a47739 100644
--- a/hw/i2c/pm_smbus.c
+++ b/hw/i2c/pm_smbus.c
@@ -1,5 +1,5 @@
/*
* PC SMBus implementation
- * splitted from acpi.c
+ * split from acpi.c
*
* Copyright (c) 2006 Fabrice Bellard
diff --git a/hw/i2c/pmbus_device.c b/hw/i2c/pmbus_device.c
index 44fe4eddbb..426f72ac60 100644
--- a/hw/i2c/pmbus_device.c
+++ b/hw/i2c/pmbus_device.c
@@ -1624,5 +1624,5 @@ static int pmbus_write_data(SMBusDevice *smd, uint8_t *buf, uint8_t len)
passthrough:
- /* Unimplimented registers get passed to the device */
+ /* Unimplemented registers get passed to the device */
default:
if (pmdc->write_data) {
diff --git a/hw/i2c/smbus_slave.c b/hw/i2c/smbus_slave.c
index feb3ec6333..2ef2c7c5f6 100644
--- a/hw/i2c/smbus_slave.c
+++ b/hw/i2c/smbus_slave.c
@@ -3,5 +3,5 @@
*
* This code is a helper for SMBus device emulation. It implements an
- * I2C device inteface and runs the SMBus protocol from the device
+ * I2C device interface and runs the SMBus protocol from the device
* point of view and maps those to simple calls to emulate.
*
diff --git a/hw/ide/ahci_internal.h b/hw/ide/ahci_internal.h
index 2480455372..c244bbd8be 100644
--- a/hw/ide/ahci_internal.h
+++ b/hw/ide/ahci_internal.h
@@ -62,5 +62,5 @@ enum AHCIHostReg {
AHCI_HOST_REG_IRQ_STAT = 2, /* IS: interrupt status */
AHCI_HOST_REG_PORTS_IMPL = 3, /* PI: bitmap of implemented ports */
- AHCI_HOST_REG_VERSION = 4, /* VS: AHCI spec. version compliancy */
+ AHCI_HOST_REG_VERSION = 4, /* VS: AHCI spec. version compliance */
AHCI_HOST_REG_CCC_CTL = 5, /* CCC_CTL: CCC Control */
AHCI_HOST_REG_CCC_PORTS = 6, /* CCC_PORTS: CCC Ports */
@@ -68,5 +68,5 @@ enum AHCIHostReg {
AHCI_HOST_REG_EM_CTL = 8, /* EM_CTL: Enclosure Mgmt Control */
AHCI_HOST_REG_CAP2 = 9, /* CAP2: host capabilities, extended */
- AHCI_HOST_REG_BOHC = 10, /* BOHC: firmare/os handoff ctrl & status */
+ AHCI_HOST_REG_BOHC = 10, /* BOHC: firmware/os handoff ctrl & status */
AHCI_HOST_REG__COUNT = 11
};
diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
index cabe9048b1..c0bcfa4414 100644
--- a/hw/ide/cmd646.c
+++ b/hw/ide/cmd646.c
@@ -258,5 +258,5 @@ static void pci_cmd646_ide_realize(PCIDevice *dev, Error **errp)
pci_conf[CNTRL] = CNTRL_EN_CH0; // enable IDE0
if (d->secondary) {
- /* XXX: if not enabled, really disable the seconday IDE controller */
+ /* XXX: if not enabled, really disable the secondary IDE controller */
pci_conf[CNTRL] |= CNTRL_EN_CH1; /* enable IDE1 */
}
diff --git a/hw/ide/core.c b/hw/ide/core.c
index de48ff9f86..ee116891ed 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -1699,5 +1699,5 @@ static bool cmd_set_features(IDEState *s, uint8_t cmd)
put_le16(identify_data + 88, 0x3f);
break;
- case 0x02: /* sigle word dma mode*/
+ case 0x02: /* single word dma mode */
put_le16(identify_data + 62, 0x07 | (1 << (val + 8)));
put_le16(identify_data + 63, 0x07);
diff --git a/hw/usb/ccid-card-emulated.c b/hw/usb/ccid-card-emulated.c
index c328660075..3ee9c73b87 100644
--- a/hw/usb/ccid-card-emulated.c
+++ b/hw/usb/ccid-card-emulated.c
@@ -519,5 +519,5 @@ static void emulated_realize(CCIDCardState *base, Error **errp)
}
- /* TODO: a passthru backened that works on local machine. third card type?*/
+ /* TODO: a passthru backend that works on local machine. third card type?*/
if (card->backend == BACKEND_CERTIFICATES) {
if (card->cert1 != NULL && card->cert2 != NULL && card->cert3 != NULL) {
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index c930c60921..19b4534c20 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -1465,5 +1465,5 @@ static int ehci_process_itd(EHCIState *ehci,
usb_packet_unmap(&ehci->ipacket, &ehci->isgl);
} else {
- DPRINTF("ISOCH: attempt to addess non-iso endpoint\n");
+ DPRINTF("ISOCH: attempt to address non-iso endpoint\n");
ehci->ipacket.status = USB_RET_NAK;
ehci->ipacket.actual_length = 0;
@@ -1514,5 +1514,5 @@ static int ehci_process_itd(EHCIState *ehci,
/* This state is the entry point for asynchronous schedule
- * processing. Entry here consitutes a EHCI start event state (4.8.5)
+ * processing. Entry here constitutes a EHCI start event state (4.8.5)
*/
static int ehci_state_waitlisthead(EHCIState *ehci, int async)
@@ -2459,5 +2459,5 @@ static void usb_ehci_vm_state_change(void *opaque, bool running, RunState state)
* The schedule rebuilt from guest memory could cause the migration dest
* to miss a QH unlink, and fail to cancel packets, since the unlinked QH
- * will never have existed on the destination. Therefor we must flush the
+ * will never have existed on the destination. Therefore we must flush the
* async schedule on savevm to catch any not yet noticed unlinks.
*/
diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c
index cc5cde6983..7ff1b65ced 100644
--- a/hw/usb/hcd-ohci.c
+++ b/hw/usb/hcd-ohci.c
@@ -1356,5 +1356,5 @@ static uint32_t ohci_get_frame_remaining(OHCIState *ohci)
return ohci->frt << 31;
}
- /* Being in USB operational state guarnatees sof_time was set already. */
+ /* Being in USB operational state guarantees sof_time was set already. */
tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - ohci->sof_time;
if (tks < 0) {
diff --git a/hw/usb/quirks.h b/hw/usb/quirks.h
index c3e595f40b..94b2c95341 100644
--- a/hw/usb/quirks.h
+++ b/hw/usb/quirks.h
@@ -68,5 +68,5 @@ static const struct usb_device_id usbredir_raw_serial_ids[] = {
{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
{ USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
- { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
+ { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME built-in converter */
{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c
index 39fbaaab16..0e256c1eca 100644
--- a/hw/usb/redirect.c
+++ b/hw/usb/redirect.c
@@ -472,5 +472,5 @@ static int bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len,
dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1;
}
- /* Since we're interupting the stream anyways, drop enough packets to get
+ /* Since we're interrupting the stream anyways, drop enough packets to get
back to our target buffer size */
if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) {
diff --git a/hw/usb/trace-events b/hw/usb/trace-events
index 6bb9655c8d..ed7dc210d3 100644
--- a/hw/usb/trace-events
+++ b/hw/usb/trace-events
@@ -249,5 +249,5 @@ usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret
# dev-hub.c
usb_hub_reset(int addr) "dev %d"
-usb_hub_control(int addr, int request, int value, int index, int length) "dev %d, req 0x%x, value %d, index %d, langth %d"
+usb_hub_control(int addr, int request, int value, int index, int length) "dev %d, req 0x%x, value %d, index %d, length %d"
usb_hub_get_port_status(int addr, int nr, int status, int changed) "dev %d, port %d, status 0x%x, changed 0x%x"
usb_hub_set_port_feature(int addr, int nr, const char *f) "dev %d, port %d, feature %s"
diff --git a/hw/usb/xen-usb.c b/hw/usb/xen-usb.c
index 38ee660a30..09ec326aea 100644
--- a/hw/usb/xen-usb.c
+++ b/hw/usb/xen-usb.c
@@ -452,5 +452,5 @@ static int usbback_check_and_submit(struct usbback_req *usbback_req)
/*
- * When the device is first connected or resetted, USB device has no
+ * When the device is first connected or reset, USB device has no
* address. In this initial state, following requests are sent to device
* address (#0),
--
2.39.2