Evaluating it at start time instead of initialization time may make the
guest capable of dynamically adding or removing migration blockers.
Also, moving to initialization reduces the number of ioctls in the
migration, reducing failure possibilities.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
---
net/vhost-vdpa.c | 200 +++++++++++++++++++++++++++++++++++++----------
1 file changed, 157 insertions(+), 43 deletions(-)
diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
index 4397c0d4b3..818a24fb0e 100644
--- a/net/vhost-vdpa.c
+++ b/net/vhost-vdpa.c
@@ -43,6 +43,13 @@ typedef struct VhostVDPAState {
/* The device always have SVQ enabled */
bool always_svq;
+
+ /* The device can isolate CVQ in its own ASID if MQ is negotiated */
+ bool cvq_isolated_mq;
+
+ /* The device can isolate CVQ in its own ASID if MQ is not negotiated */
+ bool cvq_isolated;
+
bool started;
} VhostVDPAState;
@@ -361,15 +368,8 @@ static NetClientInfo net_vhost_vdpa_info = {
.check_peer_type = vhost_vdpa_check_peer_type,
};
-/**
- * Get vring virtqueue group
- *
- * @device_fd vdpa device fd
- * @vq_index Virtqueue index
- *
- * Return -errno in case of error, or vq group if success.
- */
-static int64_t vhost_vdpa_get_vring_group(int device_fd, unsigned vq_index)
+static int64_t vhost_vdpa_get_vring_group(int device_fd, unsigned vq_index,
+ Error **errp)
{
struct vhost_vring_state state = {
.index = vq_index,
@@ -378,8 +378,7 @@ static int64_t vhost_vdpa_get_vring_group(int device_fd, unsigned vq_index)
if (unlikely(r < 0)) {
r = -errno;
- error_report("Cannot get VQ %u group: %s", vq_index,
- g_strerror(errno));
+ error_setg_errno(errp, errno, "Cannot get VQ %u group", vq_index);
return r;
}
@@ -479,9 +478,9 @@ static int vhost_vdpa_net_cvq_start(NetClientState *nc)
{
VhostVDPAState *s, *s0;
struct vhost_vdpa *v;
- uint64_t backend_features;
int64_t cvq_group;
- int cvq_index, r;
+ int r;
+ Error *err = NULL;
assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
@@ -501,42 +500,29 @@ static int vhost_vdpa_net_cvq_start(NetClientState *nc)
/*
* If we early return in these cases SVQ will not be enabled. The migration
* will be blocked as long as vhost-vdpa backends will not offer _F_LOG.
- *
- * Calling VHOST_GET_BACKEND_FEATURES as they are not available in v->dev
- * yet.
*/
- r = ioctl(v->device_fd, VHOST_GET_BACKEND_FEATURES, &backend_features);
- if (unlikely(r < 0)) {
- error_report("Cannot get vdpa backend_features: %s(%d)",
- g_strerror(errno), errno);
- return -1;
- }
- if (!(backend_features & BIT_ULL(VHOST_BACKEND_F_IOTLB_ASID)) ||
- !vhost_vdpa_net_valid_svq_features(v->dev->features, NULL)) {
+ if (!vhost_vdpa_net_valid_svq_features(v->dev->features, NULL)) {
return 0;
}
- /*
- * Check if all the virtqueues of the virtio device are in a different vq
- * than the last vq. VQ group of last group passed in cvq_group.
- */
- cvq_index = v->dev->vq_index_end - 1;
- cvq_group = vhost_vdpa_get_vring_group(v->device_fd, cvq_index);
- if (unlikely(cvq_group < 0)) {
- return cvq_group;
- }
- for (int i = 0; i < cvq_index; ++i) {
- int64_t group = vhost_vdpa_get_vring_group(v->device_fd, i);
-
- if (unlikely(group < 0)) {
- return group;
+ if (v->dev->features & BIT_ULL(VIRTIO_NET_F_MQ)) {
+ if (!s->cvq_isolated_mq) {
+ return 0;
}
-
- if (group == cvq_group) {
+ } else {
+ if (!s->cvq_isolated) {
return 0;
}
}
+ cvq_group = vhost_vdpa_get_vring_group(v->device_fd,
+ v->dev->vq_index_end - 1,
+ &err);
+ if (unlikely(cvq_group < 0)) {
+ error_report_err(err);
+ return cvq_group;
+ }
+
r = vhost_vdpa_set_address_space_id(v, cvq_group, VHOST_VDPA_NET_CVQ_ASID);
if (unlikely(r < 0)) {
return r;
@@ -798,6 +784,122 @@ static const VhostShadowVirtqueueOps vhost_vdpa_net_svq_ops = {
.avail_handler = vhost_vdpa_net_handle_ctrl_avail,
};
+/**
+ * Probe the device to check control virtqueue is isolated.
+ *
+ * @device_fd vhost-vdpa file descriptor
+ * @features features to negotiate
+ * @cvq_index Control vq index
+ *
+ * Returns -1 in case of error, 0 if false and 1 if true
+ */
+static int vhost_vdpa_cvq_is_isolated(int device_fd, uint64_t features,
+ unsigned cvq_index, Error **errp)
+{
+ int64_t cvq_group;
+ int r;
+
+ vhost_vdpa_reset_status_fd(device_fd);
+ r = vhost_vdpa_set_dev_features_fd(device_fd, features);
+ if (unlikely(r < 0)) {
+ error_setg_errno(errp, -r, "Cannot set device features");
+ return r;
+ }
+
+ cvq_group = vhost_vdpa_get_vring_group(device_fd, cvq_index, errp);
+ if (unlikely(cvq_group < 0)) {
+ r = cvq_group;
+ goto out;
+ }
+
+ for (int i = 0; i < cvq_index; ++i) {
+ int64_t group = vhost_vdpa_get_vring_group(device_fd, i, errp);
+
+ if (unlikely(group < 0)) {
+ r = group;
+ goto out;
+ }
+
+ if (group == (int64_t)cvq_group) {
+ r = 0;
+ goto out;
+ }
+ }
+
+ return 1;
+
+out:
+ vhost_vdpa_reset_status_fd(device_fd);
+ return r;
+}
+
+/**
+ * Probe if CVQ is isolated when the device is MQ and when it is not MQ
+ *
+ * @device_fd The vdpa device fd
+ * @features Features offered by the device.
+ * @cvq_index The control vq index if mq is negotiated. Ignored
+ * otherwise.
+ * @cvq_isolated It'll be set to true if cvq is isolated if mq is not
+ * negotiated.
+ * @cvq_isolated_mq It'll be set to true if cvq is isolated if mq is
+ * negotiated.
+ *
+ * Returns -1 in case of failure
+ */
+static int vhost_vdpa_probe_cvq_isolation(int device_fd, uint64_t features,
+ int cvq_index, bool *cvq_isolated,
+ bool *cvq_isolated_mq, Error **errp)
+{
+ uint64_t backend_features;
+ int r;
+
+ ERRP_GUARD();
+
+ *cvq_isolated = false;
+ *cvq_isolated_mq = false;
+ r = ioctl(device_fd, VHOST_GET_BACKEND_FEATURES, &backend_features);
+ if (unlikely(r < 0)) {
+ error_setg_errno(errp, errno, "Cannot get vdpa backend_features");
+ return r;
+ }
+
+ if (!(backend_features & BIT_ULL(VHOST_BACKEND_F_IOTLB_ASID))) {
+ return 0;
+ }
+
+ r = vhost_vdpa_cvq_is_isolated(device_fd,
+ features & ~BIT_ULL(VIRTIO_NET_F_MQ), 2,
+ errp);
+ if (unlikely(r < 0)) {
+ if (r == -ENOTSUP) {
+ /*
+ * The kernel report VHOST_BACKEND_F_IOTLB_ASID if the vdpa
+ * frontend support ASID but the parent driver does not. The CVQ
+ * cannot be isolated in this case.
+ */
+ error_free(*errp);
+ *errp = NULL;
+ return 0;
+ }
+
+ return r;
+ }
+
+ *cvq_isolated = r == 1;
+ if (!(features & BIT_ULL(VIRTIO_NET_F_MQ))) {
+ return 0;
+ }
+
+ r = vhost_vdpa_cvq_is_isolated(device_fd, features, cvq_index * 2, errp);
+ if (unlikely(r < 0)) {
+ return r;
+ }
+
+ *cvq_isolated_mq = r == 1;
+ return 0;
+}
+
static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
const char *device,
const char *name,
@@ -807,16 +909,26 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
bool is_datapath,
bool svq,
struct vhost_vdpa_iova_range iova_range,
- uint64_t features)
+ uint64_t features,
+ Error **errp)
{
NetClientState *nc = NULL;
VhostVDPAState *s;
int ret = 0;
assert(name);
+ bool cvq_isolated, cvq_isolated_mq;
+
if (is_datapath) {
nc = qemu_new_net_client(&net_vhost_vdpa_info, peer, device,
name);
} else {
+ ret = vhost_vdpa_probe_cvq_isolation(vdpa_device_fd, features,
+ queue_pair_index, &cvq_isolated,
+ &cvq_isolated_mq, errp);
+ if (unlikely(ret)) {
+ return NULL;
+ }
+
nc = qemu_new_net_control_client(&net_vhost_vdpa_cvq_info, peer,
device, name);
}
@@ -843,6 +955,8 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
s->vhost_vdpa.shadow_vq_ops = &vhost_vdpa_net_svq_ops;
s->vhost_vdpa.shadow_vq_ops_opaque = s;
+ s->cvq_isolated = cvq_isolated;
+ s->cvq_isolated_mq = cvq_isolated_mq;
/*
* TODO: We cannot migrate devices with CVQ as there is no way to set
@@ -971,7 +1085,7 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
for (i = 0; i < queue_pairs; i++) {
ncs[i] = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
vdpa_device_fd, i, 2, true, opts->x_svq,
- iova_range, features);
+ iova_range, features, errp);
if (!ncs[i])
goto err;
}
@@ -979,7 +1093,7 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
if (has_cvq) {
nc = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
vdpa_device_fd, i, 1, false,
- opts->x_svq, iova_range, features);
+ opts->x_svq, iova_range, features, errp);
if (!nc)
goto err;
}
--
2.31.1
On Fri, Mar 17, 2023 at 03:55:41PM +0100, Eugenio Pérez wrote: >Evaluating it at start time instead of initialization time may make the >guest capable of dynamically adding or removing migration blockers. > >Also, moving to initialization reduces the number of ioctls in the >migration, reducing failure possibilities. > >Signed-off-by: Eugenio Pérez <eperezma@redhat.com> >--- > net/vhost-vdpa.c | 200 +++++++++++++++++++++++++++++++++++++---------- > 1 file changed, 157 insertions(+), 43 deletions(-) > >diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c >index 4397c0d4b3..818a24fb0e 100644 >--- a/net/vhost-vdpa.c >+++ b/net/vhost-vdpa.c >@@ -43,6 +43,13 @@ typedef struct VhostVDPAState { > > /* The device always have SVQ enabled */ > bool always_svq; >+ >+ /* The device can isolate CVQ in its own ASID if MQ is negotiated */ >+ bool cvq_isolated_mq; >+ >+ /* The device can isolate CVQ in its own ASID if MQ is not negotiated */ >+ bool cvq_isolated; >+ I am not familiar with how CVQ works, so my question might be trivial ;-) but why do we need to have 2 variables depending on F_MQ? Thanks, Stefano
On Wed, Mar 22, 2023 at 3:27 PM Stefano Garzarella <sgarzare@redhat.com> wrote: > > On Fri, Mar 17, 2023 at 03:55:41PM +0100, Eugenio Pérez wrote: > >Evaluating it at start time instead of initialization time may make the > >guest capable of dynamically adding or removing migration blockers. > > > >Also, moving to initialization reduces the number of ioctls in the > >migration, reducing failure possibilities. > > > >Signed-off-by: Eugenio Pérez <eperezma@redhat.com> > >--- > > net/vhost-vdpa.c | 200 +++++++++++++++++++++++++++++++++++++---------- > > 1 file changed, 157 insertions(+), 43 deletions(-) > > > >diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c > >index 4397c0d4b3..818a24fb0e 100644 > >--- a/net/vhost-vdpa.c > >+++ b/net/vhost-vdpa.c > >@@ -43,6 +43,13 @@ typedef struct VhostVDPAState { > > > > /* The device always have SVQ enabled */ > > bool always_svq; > >+ > >+ /* The device can isolate CVQ in its own ASID if MQ is negotiated */ > >+ bool cvq_isolated_mq; > >+ > >+ /* The device can isolate CVQ in its own ASID if MQ is not negotiated */ > >+ bool cvq_isolated; > >+ > > I am not familiar with how CVQ works, so my question might be trivial > ;-) but why do we need to have 2 variables depending on F_MQ? > You're right, it is not specified anywhere in the series. Vring ASID / group management is based on vq indexes. CVQ is always the last queue, but its position depends on MQ. If it is not acked, cvq will always be queue #2. if it is acked, it will be net_config->max_virtqueue_pairs*2. Previously this was done at device start, so we always know if mq has been acked or not. But now we are moving to initialization, so we need to probe both configurations. Is that clearer now? I'll add to the patch description for sure. Thanks!
On Wed, Mar 22, 2023 at 07:04:03PM +0100, Eugenio Perez Martin wrote: >On Wed, Mar 22, 2023 at 3:27 PM Stefano Garzarella <sgarzare@redhat.com> wrote: >> >> On Fri, Mar 17, 2023 at 03:55:41PM +0100, Eugenio Pérez wrote: >> >Evaluating it at start time instead of initialization time may make the >> >guest capable of dynamically adding or removing migration blockers. >> > >> >Also, moving to initialization reduces the number of ioctls in the >> >migration, reducing failure possibilities. >> > >> >Signed-off-by: Eugenio Pérez <eperezma@redhat.com> >> >--- >> > net/vhost-vdpa.c | 200 +++++++++++++++++++++++++++++++++++++---------- >> > 1 file changed, 157 insertions(+), 43 deletions(-) >> > >> >diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c >> >index 4397c0d4b3..818a24fb0e 100644 >> >--- a/net/vhost-vdpa.c >> >+++ b/net/vhost-vdpa.c >> >@@ -43,6 +43,13 @@ typedef struct VhostVDPAState { >> > >> > /* The device always have SVQ enabled */ >> > bool always_svq; >> >+ >> >+ /* The device can isolate CVQ in its own ASID if MQ is negotiated */ >> >+ bool cvq_isolated_mq; >> >+ >> >+ /* The device can isolate CVQ in its own ASID if MQ is not negotiated */ >> >+ bool cvq_isolated; >> >+ >> >> I am not familiar with how CVQ works, so my question might be trivial >> ;-) but why do we need to have 2 variables depending on F_MQ? >> > >You're right, it is not specified anywhere in the series. > >Vring ASID / group management is based on vq indexes. CVQ is always >the last queue, but its position depends on MQ. If it is not acked, >cvq will always be queue #2. if it is acked, it will be >net_config->max_virtqueue_pairs*2. > >Previously this was done at device start, so we always know if mq has >been acked or not. But now we are moving to initialization, so we need >to probe both configurations. > >Is that clearer now? I'll add to the patch description for sure. Yes, thanks for the explanation! Stefano
© 2016 - 2024 Red Hat, Inc.