The following changes since commit 003ba52a8b327180e284630b289c6ece5a3e08b9: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-02-16 11:16:39 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230216 for you to fetch changes up to caf01d6a435d9f4a95aeae2f9fc6cb8b889b1fb8: tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG (2023-02-16 16:28:53 +0000) ---------------------------------------------------------------- target-arm queue: * Some mostly M-profile-related code cleanups * avocado: Retire the boot_linux.py AArch64 TCG tests * hw/arm/smmuv3: Add GBPA register * arm/virt: don't try to spell out the accelerator * hw/arm: Attach PSPI module to NPCM7XX SoC * Some cleanup/refactoring patches aiming towards allowing building Arm targets without CONFIG_TCG ---------------------------------------------------------------- Alex Bennée (1): tests/avocado: retire the Aarch64 TCG tests from boot_linux.py Claudio Fontana (3): target/arm: rename handle_semihosting to tcg_handle_semihosting target/arm: wrap psci call with tcg_enabled target/arm: wrap call to aarch64_sve_change_el in tcg_enabled() Cornelia Huck (1): arm/virt: don't try to spell out the accelerator Fabiano Rosas (7): target/arm: Move PC alignment check target/arm: Move cpregs code out of cpu.h tests/avocado: Skip tests that require a missing accelerator tests/avocado: Tag TCG tests with accel:tcg target/arm: Use "max" as default cpu for the virt machine with KVM tests/qtest: arm-cpu-features: Match tests to required accelerators tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG Hao Wu (3): MAINTAINERS: Add myself to maintainers and remove Havard hw/ssi: Add Nuvoton PSPI Module hw/arm: Attach PSPI module to NPCM7XX SoC Jean-Philippe Brucker (2): hw/arm/smmu-common: Support 64-bit addresses hw/arm/smmu-common: Fix TTB1 handling Mostafa Saleh (1): hw/arm/smmuv3: Add GBPA register Philippe Mathieu-Daudé (12): hw/intc/armv7m_nvic: Use OBJECT_DECLARE_SIMPLE_TYPE() macro target/arm: Simplify arm_v7m_mmu_idx_for_secstate() for user emulation target/arm: Reduce arm_v7m_mmu_idx_[all/for_secstate_and_priv]() scope target/arm: Constify ID_PFR1 on user emulation target/arm: Convert CPUARMState::eabi to boolean target/arm: Avoid resetting CPUARMState::eabi field target/arm: Restrict CPUARMState::gicv3state to sysemu target/arm: Restrict CPUARMState::arm_boot_info to sysemu target/arm: Restrict CPUARMState::nvic to sysemu target/arm: Store CPUARMState::nvic as NVICState* target/arm: Declare CPU <-> NVIC helpers in 'hw/intc/armv7m_nvic.h' hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependency MAINTAINERS | 8 +- docs/system/arm/nuvoton.rst | 2 +- hw/arm/smmuv3-internal.h | 7 + include/hw/arm/npcm7xx.h | 2 + include/hw/arm/smmu-common.h | 2 - include/hw/arm/smmuv3.h | 1 + include/hw/intc/armv7m_nvic.h | 128 +++++++++++++++++- include/hw/ssi/npcm_pspi.h | 53 ++++++++ linux-user/user-internals.h | 2 +- target/arm/cpregs.h | 98 ++++++++++++++ target/arm/cpu.h | 228 ++------------------------------- target/arm/internals.h | 14 -- hw/arm/npcm7xx.c | 25 +++- hw/arm/smmu-common.c | 4 +- hw/arm/smmuv3.c | 43 ++++++- hw/arm/virt.c | 10 +- hw/intc/armv7m_nvic.c | 38 ++---- hw/ssi/npcm_pspi.c | 221 ++++++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 4 +- target/arm/cpu.c | 5 +- target/arm/cpu_tcg.c | 3 + target/arm/helper.c | 31 +++-- target/arm/m_helper.c | 86 +++++++------ target/arm/machine.c | 18 +-- tests/qtest/arm-cpu-features.c | 28 ++-- hw/arm/Kconfig | 1 + hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + tests/avocado/avocado_qemu/__init__.py | 4 + tests/avocado/boot_linux.py | 48 ++----- tests/avocado/boot_linux_console.py | 1 + tests/avocado/machine_aarch64_virt.py | 63 ++++++++- tests/avocado/reverse_debugging.py | 8 ++ tests/qtest/meson.build | 4 +- 34 files changed, 798 insertions(+), 399 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro, similarly to automatic conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_NVIC "armv7m_nvic" - -typedef struct NVICState NVICState; -DECLARE_INSTANCE_CHECKER(NVICState, NVIC, - TYPE_NVIC) +OBJECT_DECLARE_SIMPLE_TYPE(NVICState, NVIC) /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return 0; } -#else +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + return ARMMMUIdx_MUser; +} + +#else /* !CONFIG_USER_ONLY */ /* * What kind of stack write are we doing? This affects how exceptions @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -#endif /* !CONFIG_USER_ONLY */ - ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, bool secstate, bool priv, bool negpri) { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } + +#endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv() are only used for system emulation in m_helper.c. Move the definitions to avoid prototype forward declarations. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 14 -------- target/arm/m_helper.c | 74 +++++++++++++++++++++--------------------- 2 files changed, 37 insertions(+), 51 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); -/* - * Return the MMU index for a v7M CPU with all relevant information - * manually specified. - */ -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri); - -/* - * Return the MMU index for a v7M CPU in the specified security and - * privilege state. - */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv); - /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) #else /* !CONFIG_USER_ONLY */ +static ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) +{ + ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; + + if (priv) { + mmu_idx |= ARM_MMU_IDX_M_PRIV; + } + + if (negpri) { + mmu_idx |= ARM_MMU_IDX_M_NEGPRI; + } + + if (secstate) { + mmu_idx |= ARM_MMU_IDX_M_S; + } + + return mmu_idx; +} + +static ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + +/* Return the MMU index for a v7M CPU in the specified security state */ +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + bool priv = arm_v7m_is_handler_mode(env) || + !(env->v7m.control[secstate] & 1); + + return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); +} + /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri) -{ - ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; - - if (priv) { - mmu_idx |= ARM_MMU_IDX_M_PRIV; - } - - if (negpri) { - mmu_idx |= ARM_MMU_IDX_M_NEGPRI; - } - - if (secstate) { - mmu_idx |= ARM_MMU_IDX_M_S; - } - - return mmu_idx; -} - -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) -{ - bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); - - return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); -} - -/* Return the MMU index for a v7M CPU in the specified security state */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) -{ - bool priv = arm_v7m_is_handler_mode(env) || - !(env->v7m.control[secstate] & 1); - - return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); -} - #endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } +#ifndef CONFIG_USER_ONLY /* * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. @@ -XXX,XX +XXX,XX @@ static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) return pfr1; } -#ifndef CONFIG_USER_ONLY static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, .access = PL1_R, .type = ARM_CP_NO_RAW, .accessfn = access_aa32_tid3, +#ifdef CONFIG_USER_ONLY + .type = ARM_CP_CONST, + .resetvalue = cpu->isar.id_pfr1, +#else + .type = ARM_CP_NO_RAW, + .accessfn = access_aa32_tid3, .readfn = id_pfr1_read, - .writefn = arm_cp_write_ignore }, + .writefn = arm_cp_write_ignore +#endif + }, { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/user-internals.h | 2 +- target/arm/cpu.h | 2 +- linux-user/arm/cpu_loop.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/user-internals.h b/linux-user/user-internals.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/user-internals.h +++ b/linux-user/user-internals.h @@ -XXX,XX +XXX,XX @@ void print_termios(void *arg); #ifdef TARGET_ARM static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { - return cpu_env->eabi == 1; + return cpu_env->eabi; } #elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32) static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; } diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { #if defined(CONFIG_USER_ONLY) /* For usermode syscall translation. */ - int eabi; + bool eabi; #endif struct CPUBreakpoint *cpu_breakpoint[16]; diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_SWI: { - env->eabi = 1; + env->eabi = true; /* system call */ if (env->thumb) { /* Thumb is always EABI style with syscall number in r7 */ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) * > 0xfffff and are handled below as out-of-range. */ n ^= ARM_SYSCALL_BASE; - env->eabi = 0; + env->eabi = false; } } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Although the 'eabi' field is only used in user emulation where CPU reset doesn't occur, it doesn't belong to the area to reset. Move it after the 'end_reset_fields' for consistency. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMVectorReg zarray[ARM_MAX_VQ * 16]; #endif -#if defined(CONFIG_USER_ONLY) - /* For usermode syscall translation. */ - bool eabi; -#endif - struct CPUBreakpoint *cpu_breakpoint[16]; struct CPUWatchpoint *cpu_watchpoint[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; +#if defined(CONFIG_USER_ONLY) + /* For usermode syscall translation. */ + bool eabi; +#endif /* CONFIG_USER_ONLY */ #ifdef TARGET_TAGGED_ADDRESSES /* Linux syscall tagged address support */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { void *nvic; const struct arm_boot_info *boot_info; +#if !defined(CONFIG_USER_ONLY) /* Store GICv3CPUState to access from this struct */ void *gicv3state; -#if defined(CONFIG_USER_ONLY) +#else /* CONFIG_USER_ONLY */ /* For usermode syscall translation. */ bool eabi; #endif /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; void *nvic; - const struct arm_boot_info *boot_info; #if !defined(CONFIG_USER_ONLY) + const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; #else /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint32_t ctrl; } sau; - void *nvic; #if !defined(CONFIG_USER_ONLY) + void *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> There is no point in using a void pointer to access the NVIC. Use the real type to avoid casting it while debugging. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 46 ++++++++++++++++++++++--------------------- hw/intc/armv7m_nvic.c | 38 ++++++++++++----------------------- target/arm/cpu.c | 1 + target/arm/m_helper.c | 2 +- 4 files changed, 39 insertions(+), 48 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMTBFlags { typedef struct ARMMMUFaultInfo ARMMMUFaultInfo; +typedef struct NVICState NVICState; + typedef struct CPUArchState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; #if !defined(CONFIG_USER_ONLY) - void *nvic; + NVICState *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, /* Interface between CPU and Interrupt controller. */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(void *opaque); +bool armv7m_nvic_can_take_pending_exception(NVICState *s); #else -static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) { return true; } #endif /** * armv7m_nvic_set_pending: mark the specified exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * exceptions (exceptions generated in the course of trying to take * a different exception). */ -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Similar to armv7m_nvic_set_pending(), but specifically for exceptions * generated in the course of lazy stacking of FP registers. */ -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state - * @opaque: the NVIC + * @s: the NVIC * @pirq: set to pending exception number * @ptargets_secure: set to whether pending exception targets Secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); * to true if the current highest priority pending exception should * be taken to Secure state, false for NS. */ -void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @opaque: the NVIC + * @s: the NVIC * * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. */ -void armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(NVICState *s); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to complete * @secure: true if this exception was secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); * interrupt the current execution priority. This controls whether the * RDY bit for it in the FPCCR is set. */ -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @opaque: the NVIC + * @s: the NVIC * * Returns: the raw execution priority as defined by the v8M architecture. * This is the execution priority minus the effects of AIRCR.PRIS, * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. * (v8M ARM ARM I_PKLD.) */ -int armv7m_nvic_raw_execution_priority(void *opaque); +int armv7m_nvic_raw_execution_priority(NVICState *s); /** * armv7m_nvic_neg_prio_requested: return true if the requested execution * priority is negative for the specified security state. - * @opaque: the NVIC + * @s: the NVIC * @secure: the security state to test * This corresponds to the pseudocode IsReqExecPriNeg(). */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); #else -static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { return false; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { /* Return true if the requested execution priority is negative * for the specified security state, ie that security state @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) * mean we don't allow FAULTMASK_NS to actually make the execution * priority negative). Compare pseudocode IsReqExcPriNeg(). */ - NVICState *s = opaque; - if (s->cpu->env.v7m.faultmask[secure]) { return true; } @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) return false; } -bool armv7m_nvic_can_take_pending_exception(void *opaque) +bool armv7m_nvic_can_take_pending_exception(NVICState *s) { - NVICState *s = opaque; - return nvic_exec_prio(s) > nvic_pending_prio(s); } -int armv7m_nvic_raw_execution_priority(void *opaque) +int armv7m_nvic_raw_execution_priority(NVICState *s) { - NVICState *s = opaque; - return s->exception_prio; } @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) +static void armv7m_nvic_clear_pending(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); @@ -XXX,XX +XXX,XX @@ static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, false); + do_armv7m_nvic_set_pending(s, irq, secure, false); } -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, true); + do_armv7m_nvic_set_pending(s, irq, secure, true); } -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure) { /* * Pend an exception during lazy FP stacking. This differs @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) * whether we should escalate depends on the saved context * in the FPCCR register, not on the current state of the CPU/NVIC. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(NVICState *s) { - NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); @@ -XXX,XX +XXX,XX @@ static bool vectpending_targets_secure(NVICState *s) exc_targets_secure(s, s->vectpending); } -void armv7m_nvic_get_pending_irq_info(void *opaque, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure) { - NVICState *s = (NVICState *)opaque; const int pending = s->vectpending; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_get_pending_irq_info(void *opaque, *pirq = pending; } -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; int ret = 0; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure) { /* * Return whether an exception is "ready", i.e. it is enabled and is @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) * for non-banked exceptions secure is always false; for banked exceptions * it indicates which of the exceptions is required. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; int running = nvic_exec_prio(s); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#include "hw/intc/armv7m_nvic.h" #endif #include "sysemu/tcg.h" #include "sysemu/qtest.h" diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, * that we will need later in order to do lazy FP reg stacking. */ bool is_secure = env->v7m.secure; - void *nvic = env->nvic; + NVICState *nvic = env->nvic; /* * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits * are banked and we want to update the bit in the bank for the -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> While dozens of files include "cpu.h", only 3 files require these NVIC helper declarations. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 123 ++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 123 ---------------------------------- target/arm/cpu.c | 4 +- target/arm/cpu_tcg.c | 3 + target/arm/m_helper.c | 3 + 5 files changed, 132 insertions(+), 124 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { qemu_irq sysresetreq; }; +/* Interface between CPU and Interrupt controller. */ +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @s: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, + bool *ptargets_secure); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @s: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + */ +void armv7m_nvic_acknowledge_irq(NVICState *s); +/** + * armv7m_nvic_complete_irq: complete specified interrupt or exception + * @s: the NVIC + * @irq: the exception number to complete + * @secure: true if this exception was secure + * + * Returns: -1 if the irq was not active + * 1 if completing this irq brought us back to base (no active irqs) + * 0 if there is still an irq active after this one was completed + * (Ignoring -1, this is the same as the RETTOBASE value before completion.) + */ +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_raw_execution_priority: return the raw execution priority + * @s: the NVIC + * + * Returns: the raw execution priority as defined by the v8M architecture. + * This is the execution priority minus the effects of AIRCR.PRIS, + * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. + * (v8M ARM ARM I_PKLD.) + */ +int armv7m_nvic_raw_execution_priority(NVICState *s); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @s: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) +{ + return false; +} +#endif +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_can_take_pending_exception(NVICState *s); +#else +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) +{ + return true; +} +#endif + #endif diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface between CPU and Interrupt controller. */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(NVICState *s); -#else -static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) -{ - return true; -} -#endif -/** - * armv7m_nvic_set_pending: mark the specified exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Marks the specified exception as pending. Note that we will assert() - * if @secure is true and @irq does not specify one of the fixed set - * of architecturally banked exceptions. - */ -void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for derived - * exceptions (exceptions generated in the course of trying to take - * a different exception). - */ -void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for exceptions - * generated in the course of lazy stacking of FP registers. - */ -void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_pending_irq_info: return highest priority pending - * exception, and whether it targets Secure state - * @s: the NVIC - * @pirq: set to pending exception number - * @ptargets_secure: set to whether pending exception targets Secure - * - * This function writes the number of the highest priority pending - * exception (the one which would be made active by - * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure - * to true if the current highest priority pending exception should - * be taken to Secure state, false for NS. - */ -void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, - bool *ptargets_secure); -/** - * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @s: the NVIC - * - * Move the current highest priority pending exception from the pending - * state to the active state, and update v7m.exception to indicate that - * it is the exception currently being handled. - */ -void armv7m_nvic_acknowledge_irq(NVICState *s); -/** - * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @s: the NVIC - * @irq: the exception number to complete - * @secure: true if this exception was secure - * - * Returns: -1 if the irq was not active - * 1 if completing this irq brought us back to base (no active irqs) - * 0 if there is still an irq active after this one was completed - * (Ignoring -1, this is the same as the RETTOBASE value before completion.) - */ -int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Return whether an exception is "ready", i.e. whether the exception is - * enabled and is configured at a priority which would allow it to - * interrupt the current execution priority. This controls whether the - * RDY bit for it in the FPCCR is set. - */ -bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @s: the NVIC - * - * Returns: the raw execution priority as defined by the v8M architecture. - * This is the execution priority minus the effects of AIRCR.PRIS, - * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. - * (v8M ARM ARM I_PKLD.) - */ -int armv7m_nvic_raw_execution_priority(NVICState *s); -/** - * armv7m_nvic_neg_prio_requested: return true if the requested execution - * priority is negative for the specified security state. - * @s: the NVIC - * @secure: the security state to test - * This corresponds to the pseudocode IsReqExecPriNeg(). - */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); -#else -static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) -{ - return false; -} -#endif - /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs * which are passed to define_arm_cp_regs(). diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#ifdef CONFIG_TCG #include "hw/intc/armv7m_nvic.h" -#endif +#endif /* CONFIG_TCG */ +#endif /* !CONFIG_USER_ONLY */ #include "sysemu/tcg.h" #include "sysemu/qtest.h" #include "sysemu/hw_accel.h" diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #endif #include "cpregs.h" +#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) +#include "hw/intc/armv7m_nvic.h" +#endif /* Share AArch32 -cpu max features with AArch64. */ diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif +#if !defined(CONFIG_USER_ONLY) +#include "hw/intc/armv7m_nvic.h" +#endif static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask, uint32_t reg, uint32_t val) -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> The two TCG tests for GICv2 and GICv3 are very heavy weight distros that take a long time to boot up, especially for an --enable-debug build. The total code coverage they give is: Overall coverage rate: lines......: 11.2% (59584 of 530123 lines) functions..: 15.0% (7436 of 49443 functions) branches...: 6.3% (19273 of 303933 branches) We already get pretty close to that with the machine_aarch64_virt tests which only does one full boot (~120s vs ~600s) of alpine. We expand the kernel+initrd boot (~8s) to test both GICs and also add an RNG device and a block device to generate a few IRQs and exercise the storage layer. With that we get to a coverage of: Overall coverage rate: lines......: 11.0% (58121 of 530123 lines) functions..: 14.9% (7343 of 49443 functions) branches...: 6.0% (18269 of 303933 branches) which I feel is close enough given the massive time saving. If we want to target any more sub-systems we can use lighter weight more directed tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux.py | 48 ++++---------------- tests/avocado/machine_aarch64_virt.py | 63 ++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 46 deletions(-) diff --git a/tests/avocado/boot_linux.py b/tests/avocado/boot_linux.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux.py +++ b/tests/avocado/boot_linux.py @@ -XXX,XX +XXX,XX @@ def test_pc_q35_kvm(self): self.launch_and_wait(set_up_ssh_connection=False) -# For Aarch64 we only boot KVM tests in CI as the TCG tests are very -# heavyweight. There are lighter weight distros which we use in the -# machine_aarch64_virt.py tests. +# For Aarch64 we only boot KVM tests in CI as booting the current +# Fedora OS in TCG tests is very heavyweight. There are lighter weight +# distros which we use in the machine_aarch64_virt.py tests. class BootLinuxAarch64(LinuxTest): """ :avocado: tags=arch:aarch64 :avocado: tags=machine:virt - :avocado: tags=machine:gic-version=2 """ timeout = 720 - def add_common_args(self): - self.vm.add_args('-bios', - os.path.join(BUILD_DIR, 'pc-bios', - 'edk2-aarch64-code.fd')) - self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') - self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv2(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv2 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=2") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv3(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv3 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=3") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - def test_virt_kvm(self): """ :avocado: tags=accel:kvm @@ -XXX,XX +XXX,XX @@ def test_virt_kvm(self): self.require_accelerator("kvm") self.vm.add_args("-accel", "kvm") self.vm.add_args("-machine", "virt,gic-version=host") - self.add_common_args() + self.vm.add_args('-bios', + os.path.join(BUILD_DIR, 'pc-bios', + 'edk2-aarch64-code.fd')) + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') self.launch_and_wait(set_up_ssh_connection=False) diff --git a/tests/avocado/machine_aarch64_virt.py b/tests/avocado/machine_aarch64_virt.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aarch64_virt.py +++ b/tests/avocado/machine_aarch64_virt.py @@ -XXX,XX +XXX,XX @@ import time import os +import logging from avocado_qemu import QemuSystemTest from avocado_qemu import wait_for_console_pattern from avocado_qemu import exec_command from avocado_qemu import BUILD_DIR +from avocado.utils import process +from avocado.utils.path import find_command class Aarch64VirtMachine(QemuSystemTest): KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 ' @@ -XXX,XX +XXX,XX @@ def test_alpine_virt_tcg_gic_max(self): self.wait_for_console_pattern('Welcome to Alpine Linux 3.16') - def test_aarch64_virt(self): + def common_aarch64_virt(self, machine): """ - :avocado: tags=arch:aarch64 - :avocado: tags=machine:virt - :avocado: tags=accel:tcg - :avocado: tags=cpu:max + Common code to launch basic virt machine with kernel+initrd + and a scratch disk. """ + logger = logging.getLogger('aarch64_virt') + kernel_url = ('https://fileserver.linaro.org/s/' 'z6B2ARM7DQT3HWN/download') - kernel_hash = 'ed11daab50c151dde0e1e9c9cb8b2d9bd3215347' kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) @@ -XXX,XX +XXX,XX @@ def test_aarch64_virt(self): 'console=ttyAMA0') self.require_accelerator("tcg") self.vm.add_args('-cpu', 'max,pauth-impdef=on', + '-machine', machine, '-accel', 'tcg', '-kernel', kernel_path, '-append', kernel_command_line) + + # A RNG offers an easy way to generate a few IRQs + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', + 'rng-random,id=rng0,filename=/dev/urandom') + + # Also add a scratch block device + logger.info('creating scratch qcow2 image') + image_path = os.path.join(self.workdir, 'scratch.qcow2') + qemu_img = os.path.join(BUILD_DIR, 'qemu-img') + if not os.path.exists(qemu_img): + qemu_img = find_command('qemu-img', False) + if qemu_img is False: + self.cancel('Could not find "qemu-img", which is required to ' + 'create the temporary qcow2 image') + cmd = '%s create -f qcow2 %s 8M' % (qemu_img, image_path) + process.run(cmd) + + # Add the device + self.vm.add_args('-blockdev', + f"driver=qcow2,file.driver=file,file.filename={image_path},node-name=scratch") + self.vm.add_args('-device', + 'virtio-blk-device,drive=scratch') + self.vm.launch() self.wait_for_console_pattern('Welcome to Buildroot') time.sleep(0.1) exec_command(self, 'root') time.sleep(0.1) + exec_command(self, 'dd if=/dev/hwrng of=/dev/vda bs=512 count=4') + time.sleep(0.1) + exec_command(self, 'md5sum /dev/vda') + time.sleep(0.1) + exec_command(self, 'cat /proc/interrupts') + time.sleep(0.1) exec_command(self, 'cat /proc/self/maps') time.sleep(0.1) + + def test_aarch64_virt_gicv3(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic_version=3") + + def test_aarch64_virt_gicv2(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic-version=2") -- 2.34.1 From: Mostafa Saleh <smostafa@google.com> GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 7 +++++++ include/hw/arm/smmuv3.h | 1 + hw/arm/smmuv3.c | 43 +++++++++++++++++++++++++++++++++++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(CR0ACK, 0x24) REG32(CR1, 0x28) REG32(CR2, 0x2c) REG32(STATUSR, 0x40) +REG32(GBPA, 0x44) + FIELD(GBPA, ABORT, 20, 1) + FIELD(GBPA, UPDATE, 31, 1) + +/* Use incoming. */ +#define SMMU_GBPA_RESET_VAL 0x1000 + REG32(IRQ_CTRL, 0x50) FIELD(IRQ_CTRL, GERROR_IRQEN, 0, 1) FIELD(IRQ_CTRL, PRI_IRQEN, 1, 1) diff --git a/include/hw/arm/smmuv3.h b/include/hw/arm/smmuv3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmuv3.h +++ b/include/hw/arm/smmuv3.h @@ -XXX,XX +XXX,XX @@ struct SMMUv3State { uint32_t cr[3]; uint32_t cr0ack; uint32_t statusr; + uint32_t gbpa; uint32_t irq_ctrl; uint32_t gerror; uint32_t gerrorn; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->gerror = 0; s->gerrorn = 0; s->statusr = 0; + s->gbpa = SMMU_GBPA_RESET_VAL; } static int smmu_get_ste(SMMUv3State *s, dma_addr_t addr, STE *buf, @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr addr, qemu_mutex_lock(&s->mutex); if (!smmu_enabled(s)) { - status = SMMU_TRANS_DISABLE; + if (FIELD_EX32(s->gbpa, GBPA, ABORT)) { + status = SMMU_TRANS_ABORT; + } else { + status = SMMU_TRANS_DISABLE; + } goto epilogue; } @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr offset, case A_GERROR_IRQ_CFG2: s->gerror_irq_cfg2 = data; return MEMTX_OK; + case A_GBPA: + /* + * If UPDATE is not set, the write is ignored. This is the only + * permitted behavior in SMMUv3.2 and later. + */ + if (data & R_GBPA_UPDATE_MASK) { + /* Ignore update bit as write is synchronous. */ + s->gbpa = data & ~R_GBPA_UPDATE_MASK; + } + return MEMTX_OK; case A_STRTAB_BASE: /* 64b */ s->strtab_base = deposit64(s->strtab_base, 0, 32, data); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_readl(SMMUv3State *s, hwaddr offset, case A_STATUSR: *data = s->statusr; return MEMTX_OK; + case A_GBPA: + *data = s->gbpa; + return MEMTX_OK; case A_IRQ_CTRL: case A_IRQ_CTRL_ACK: *data = s->irq_ctrl; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3_queue = { }, }; +static bool smmuv3_gbpa_needed(void *opaque) +{ + SMMUv3State *s = opaque; + + /* Only migrate GBPA if it has different reset value. */ + return s->gbpa != SMMU_GBPA_RESET_VAL; +} + +static const VMStateDescription vmstate_gbpa = { + .name = "smmuv3/gbpa", + .version_id = 1, + .minimum_version_id = 1, + .needed = smmuv3_gbpa_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gbpa, SMMUv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { VMSTATE_END_OF_LIST(), }, + .subsections = (const VMStateDescription * []) { + &vmstate_gbpa, + NULL + } }; static void smmuv3_instance_init(Object *obj) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config XLNX_ZYNQMP_ARM select XLNX_CSU_DMA select XLNX_ZYNQMP select XLNX_ZDMA + select USB_DWC3 config XLNX_VERSAL bool -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (vms->secure && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Security extensions (TrustZone) to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->mte && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "MTE to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Havard is no longer working on the Nuvoton systems for a while and won't be able to do any work on it in the future. So I'll take over maintaining the Nuvoton system from him. Signed-off-by: Hao Wu <wuhaotsh@google.com> Acked-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/net/mv88w8618_eth.h F: docs/system/arm/musicpal.rst Nuvoton NPCM7xx -M: Havard Skinnemoen <hskinnemoen@google.com> M: Tyrone Ting <kfting@nuvoton.com> +M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Nuvoton's PSPI is a general purpose SPI module which enables connections to SPI-based peripheral devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 6 +- include/hw/ssi/npcm_pspi.h | 53 +++++++++ hw/ssi/npcm_pspi.c | 221 +++++++++++++++++++++++++++++++++++++ hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + 5 files changed, 283 insertions(+), 4 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Tyrone Ting <kfting@nuvoton.com> M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported -F: hw/*/npcm7xx* -F: include/hw/*/npcm7xx* -F: tests/qtest/npcm7xx* +F: hw/*/npcm* +F: include/hw/*/npcm* +F: tests/qtest/npcm* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom F: docs/system/arm/nuvoton.rst diff --git a/include/hw/ssi/npcm_pspi.h b/include/hw/ssi/npcm_pspi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/npcm_pspi.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton Peripheral SPI Module + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM_PSPI_H +#define NPCM_PSPI_H + +#include "hw/ssi/ssi.h" +#include "hw/sysbus.h" + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM_PSPI_NR_REGS 3 + +/** + * NPCMPSPIState - Device state for one Flash Interface Unit. + * @parent: System bus device. + * @mmio: Memory region for register access. + * @spi: The SPI bus mastered by this controller. + * @regs: Register contents. + * @irq: The interrupt request queue for this module. + * + * Each PSPI has a shared bank of registers, and controls up to four chip + * selects. Each chip select has a dedicated memory region which may be used to + * read and write the flash connected to that chip select as if it were memory. + */ +typedef struct NPCMPSPIState { + SysBusDevice parent; + + MemoryRegion mmio; + + SSIBus *spi; + uint16_t regs[NPCM_PSPI_NR_REGS]; + qemu_irq irq; +} NPCMPSPIState; + +#define TYPE_NPCM_PSPI "npcm-pspi" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMPSPIState, NPCM_PSPI) + +#endif /* NPCM_PSPI_H */ diff --git a/hw/ssi/npcm_pspi.c b/hw/ssi/npcm_pspi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/npcm_pspi.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM Peripheral SPI Module (PSPI) + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/irq.h" +#include "hw/registerfields.h" +#include "hw/ssi/npcm_pspi.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +REG16(PSPI_DATA, 0x0) +REG16(PSPI_CTL1, 0x2) + FIELD(PSPI_CTL1, SPIEN, 0, 1) + FIELD(PSPI_CTL1, MOD, 2, 1) + FIELD(PSPI_CTL1, EIR, 5, 1) + FIELD(PSPI_CTL1, EIW, 6, 1) + FIELD(PSPI_CTL1, SCM, 7, 1) + FIELD(PSPI_CTL1, SCIDL, 8, 1) + FIELD(PSPI_CTL1, SCDV, 9, 7) +REG16(PSPI_STAT, 0x4) + FIELD(PSPI_STAT, BSY, 0, 1) + FIELD(PSPI_STAT, RBF, 1, 1) + +static void npcm_pspi_update_irq(NPCMPSPIState *s) +{ + int level = 0; + + /* Only fire IRQ when the module is enabled. */ + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, SPIEN)) { + /* Update interrupt as BSY is cleared. */ + if ((!FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, BSY)) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIW)) { + level = 1; + } + + /* Update interrupt as RBF is set. */ + if (FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, RBF) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIR)) { + level = 1; + } + } + qemu_set_irq(s->irq, level); +} + +static uint16_t npcm_pspi_read_data(NPCMPSPIState *s) +{ + uint16_t value = s->regs[R_PSPI_DATA]; + + /* Clear stat bits as the value are read out. */ + s->regs[R_PSPI_STAT] = 0; + + return value; +} + +static void npcm_pspi_write_data(NPCMPSPIState *s, uint16_t data) +{ + uint16_t value = 0; + + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, MOD)) { + value = ssi_transfer(s->spi, extract16(data, 8, 8)) << 8; + } + value |= ssi_transfer(s->spi, extract16(data, 0, 8)); + s->regs[R_PSPI_DATA] = value; + + /* Mark data as available */ + s->regs[R_PSPI_STAT] = R_PSPI_STAT_BSY_MASK | R_PSPI_STAT_RBF_MASK; +} + +/* Control register read handler. */ +static uint64_t npcm_pspi_ctrl_read(void *opaque, hwaddr addr, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value; + + switch (addr) { + case A_PSPI_DATA: + value = npcm_pspi_read_data(s); + break; + + case A_PSPI_CTL1: + value = s->regs[R_PSPI_CTL1]; + break; + + case A_PSPI_STAT: + value = s->regs[R_PSPI_STAT]; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return 0; + } + trace_npcm_pspi_ctrl_read(DEVICE(s)->canonical_path, addr, value); + npcm_pspi_update_irq(s); + + return value; +} + +/* Control register write handler. */ +static void npcm_pspi_ctrl_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value = v; + + trace_npcm_pspi_ctrl_write(DEVICE(s)->canonical_path, addr, value); + + switch (addr) { + case A_PSPI_DATA: + npcm_pspi_write_data(s, value); + break; + + case A_PSPI_CTL1: + s->regs[R_PSPI_CTL1] = value; + break; + + case A_PSPI_STAT: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register PSPI_STAT: 0x%08" + PRIx64 "\n", DEVICE(s)->canonical_path, v); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return; + } + npcm_pspi_update_irq(s); +} + +static const MemoryRegionOps npcm_pspi_ctrl_ops = { + .read = npcm_pspi_ctrl_read, + .write = npcm_pspi_ctrl_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 2, + .unaligned = false, + }, + .impl = { + .min_access_size = 2, + .max_access_size = 2, + .unaligned = false, + }, +}; + +static void npcm_pspi_enter_reset(Object *obj, ResetType type) +{ + NPCMPSPIState *s = NPCM_PSPI(obj); + + trace_npcm_pspi_enter_reset(DEVICE(obj)->canonical_path, type); + memset(s->regs, 0, sizeof(s->regs)); +} + +static void npcm_pspi_realize(DeviceState *dev, Error **errp) +{ + NPCMPSPIState *s = NPCM_PSPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Object *obj = OBJECT(dev); + + s->spi = ssi_create_bus(dev, "pspi"); + memory_region_init_io(&s->mmio, obj, &npcm_pspi_ctrl_ops, s, + "mmio", 4 * KiB); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); +} + +static const VMStateDescription vmstate_npcm_pspi = { + .name = "npcm-pspi", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT16_ARRAY(regs, NPCMPSPIState, NPCM_PSPI_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + + +static void npcm_pspi_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM Peripheral SPI Module"; + dc->realize = npcm_pspi_realize; + dc->vmsd = &vmstate_npcm_pspi; + rc->phases.enter = npcm_pspi_enter_reset; +} + +static const TypeInfo npcm_pspi_types[] = { + { + .name = TYPE_NPCM_PSPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMPSPIState), + .class_init = npcm_pspi_class_init, + }, +}; +DEFINE_TYPES(npcm_pspi_types); diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/meson.build +++ b/hw/ssi/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_smc.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-spi.c')) -softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c', 'npcm_pspi.c')) softmmu_ss.add(when: 'CONFIG_PL022', if_true: files('pl022.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_SPI', if_true: files('sifive_spi.c')) softmmu_ss.add(when: 'CONFIG_SSI', if_true: files('ssi.c')) diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 npcm7xx_fiu_flash_write(const char *id, unsigned cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 +# npcm_pspi.c +npcm_pspi_enter_reset(const char *id, int reset_type) "%s reset type: %d" +npcm_pspi_ctrl_read(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 +npcm_pspi_ctrl_write(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 + # ibex_spi_host.c ibex_spi_host_reset(const char *msg) "%s" -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 25 +++++++++++++++++++++++-- 3 files changed, 26 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * SMBus controller (SMBF) * Ethernet controller (EMC) * Tachometer + * Peripheral SPI controller (PSPI) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controller (GMAC) * USB device (USBD) - * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface * PCI and PCIe root complex and bridges diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/ssi/npcm_pspi.h" #include "hw/usb/hcd-ehci.h" #include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; + NPCMPSPIState pspi[2]; }; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_EMC1RX_IRQ = 15, NPCM7XX_EMC1TX_IRQ, NPCM7XX_MMC_IRQ = 26, + NPCM7XX_PSPI2_IRQ = 28, + NPCM7XX_PSPI1_IRQ = 31, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_emc_addr[] = { 0xf0826000, }; +/* Register base address for each PSPI Module */ +static const hwaddr npcm7xx_pspi_addr[] = { + 0xf0200000, + 0xf0201000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); } + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + object_initialize_child(obj, "pspi[*]", &s->pspi[i], TYPE_NPCM_PSPI); + } + object_initialize_child(obj, "mmc", &s->mmc, TYPE_NPCM7XX_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc), 0, npcm7xx_irq(s, NPCM7XX_MMC_IRQ)); + /* PSPI */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pspi_addr) != ARRAY_SIZE(s->pspi)); + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pspi[i]); + int irq = (i == 0) ? NPCM7XX_PSPI1_IRQ : NPCM7XX_PSPI2_IRQ; + + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_pspi_addr[i]); + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, irq)); + } + create_unimplemented_device("npcm7xx.shm", 0xc0001000, 4 * KiB); create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi1", 0xf0200000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi2", 0xf0201000, 4 * KiB); create_unimplemented_device("npcm7xx.ahbpci", 0xf0400000, 1 * MiB); create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 2 -- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ #define SMMU_PCI_DEVFN_MAX 256 #define SMMU_PCI_DEVFN(sid) (sid & 0xFF) -#define SMMU_MAX_VA_BITS 48 - /* * Page table walk error types */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) memory_region_init_iommu(&sdev->iommu, sizeof(sdev->iommu), s->mrtypename, - OBJECT(s), name, 1ULL << SMMU_MAX_VA_BITS); + OBJECT(s), name, UINT64_MAX); address_space_init(&sdev->as, MEMORY_REGION(&sdev->iommu), name); trace_smmu_add_mr(name); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUTransTableInfo *select_tt(SMMUTransCfg *cfg, dma_addr_t iova) /* there is a ttbr0 region and we are in it (high bits all zero) */ return &cfg->tt[0]; } else if (cfg->tt[1].tsz && - !extract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte)) { + sextract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte) == -1) { /* there is a ttbr1 region and we are in it (high bits all one) */ return &cfg->tt[1]; } else if (!cfg->tt[0].tsz) { -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> make it clearer from the name that this is a tcg-only function. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) * trapped to the hypervisor in KVM. */ #ifdef CONFIG_TCG -static void handle_semihosting(CPUState *cs) +static void tcg_handle_semihosting(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) */ #ifdef CONFIG_TCG if (cs->exception_index == EXCP_SEMIHOST) { - handle_semihosting(cs); + tcg_handle_semihosting(cs); return; } #endif -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> for "all" builds (tcg + kvm), we want to avoid doing the psci check if tcg is built-in, but not enabled. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" +#include "sysemu/tcg.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) env->exception.syndrome); } - if (arm_is_psci_call(cpu, cs->exception_index)) { + if (tcg_enabled() && arm_is_psci_call(cpu, cs->exception_index)) { arm_handle_psci_call(cpu); qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); return; -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) unsigned int cur_el = arm_current_el(env); int rt; - /* - * Note that new_el can never be 0. If cur_el is 0, then - * el0_a64 is is_a64(), else el0_a64 is ignored. - */ - aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + if (tcg_enabled()) { + /* + * Note that new_el can never be 0. If cur_el is 0, then + * el0_a64 is is_a64(), else el0_a64 is ignored. + */ + aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + } if (cur_el < new_el) { /* -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Move this earlier to make the next patch diff cleaner. While here update the comment slightly to not give the impression that the misalignment affects only TCG. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } + /* + * Misaligned thumb pc is architecturally impossible. Fail the + * incoming migration. For TCG it would trigger the assert in + * thumb_tr_translate_insn(). + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } - /* - * Misaligned thumb pc is architecturally impossible. - * We have an assert in thumb_tr_translate_insn to verify this. - * Fail an incoming migrate to avoid this assert. - */ - if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { - return -1; - } - if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Since commit cf7c6d1004 ("target/arm: Split out cpregs.h") we now have a cpregs.h header which is more suitable for this code. Code moved verbatim. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 98 +++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 91 ----------------------------------------- 2 files changed, 98 insertions(+), 91 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SME = 1 << 19, }; +/* + * Interface for defining coprocessor registers. + * Registers are defined in tables of arm_cp_reginfo structs + * which are passed to define_arm_cp_regs(). + */ + +/* + * When looking up a coprocessor register we look for it + * via an integer which encodes all of: + * coprocessor number + * Crn, Crm, opc1, opc2 fields + * 32 or 64 bit register (ie is it accessed via MRC/MCR + * or via MRRC/MCRR?) + * non-secure/secure bank (AArch32 only) + * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. + * (In this case crn and opc2 should be zero.) + * For AArch64, there is no 32/64 bit size distinction; + * instead all registers have a 2 bit op0, 3 bit op1 and op2, + * and 4 bit CRn and CRm. The encoding patterns are chosen + * to be easy to convert to and from the KVM encodings, and also + * so that the hashtable can contain both AArch32 and AArch64 + * registers (to allow for interprocessing where we might run + * 32 bit code on a 64 bit core). + */ +/* + * This bit is private to our hashtable cpreg; in KVM register + * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 + * in the upper bits of the 64 bit ID. + */ +#define CP_REG_AA64_SHIFT 28 +#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) + +/* + * To enable banking of coprocessor registers depending on ns-bit we + * add a bit to distinguish between secure and non-secure cpregs in the + * hashtable. + */ +#define CP_REG_NS_SHIFT 29 +#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) + +#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ + ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ + ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) + +#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ + (CP_REG_AA64_MASK | \ + ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ + ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ + ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ + ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ + ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ + ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) + +/* + * Convert a full 64 bit KVM register ID to the truncated 32 bit + * version used as a key for the coprocessor register hashtable + */ +static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) +{ + uint32_t cpregid = kvmid; + if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { + cpregid |= CP_REG_AA64_MASK; + } else { + if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { + cpregid |= (1 << 15); + } + + /* + * KVM is always non-secure so add the NS flag on AArch32 register + * entries. + */ + cpregid |= 1 << CP_REG_NS_SHIFT; + } + return cpregid; +} + +/* + * Convert a truncated 32 bit hashtable key into the full + * 64 bit KVM register ID. + */ +static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) +{ + uint64_t kvmid; + + if (cpregid & CP_REG_AA64_MASK) { + kvmid = cpregid & ~CP_REG_AA64_MASK; + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; + } else { + kvmid = cpregid & ~(1 << 15); + if (cpregid & (1 << 15)) { + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + } else { + kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + } + } + return kvmid; +} + /* * Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface for defining coprocessor registers. - * Registers are defined in tables of arm_cp_reginfo structs - * which are passed to define_arm_cp_regs(). - */ - -/* When looking up a coprocessor register we look for it - * via an integer which encodes all of: - * coprocessor number - * Crn, Crm, opc1, opc2 fields - * 32 or 64 bit register (ie is it accessed via MRC/MCR - * or via MRRC/MCRR?) - * non-secure/secure bank (AArch32 only) - * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. - * (In this case crn and opc2 should be zero.) - * For AArch64, there is no 32/64 bit size distinction; - * instead all registers have a 2 bit op0, 3 bit op1 and op2, - * and 4 bit CRn and CRm. The encoding patterns are chosen - * to be easy to convert to and from the KVM encodings, and also - * so that the hashtable can contain both AArch32 and AArch64 - * registers (to allow for interprocessing where we might run - * 32 bit code on a 64 bit core). - */ -/* This bit is private to our hashtable cpreg; in KVM register - * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 - * in the upper bits of the 64 bit ID. - */ -#define CP_REG_AA64_SHIFT 28 -#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) - -/* To enable banking of coprocessor registers depending on ns-bit we - * add a bit to distinguish between secure and non-secure cpregs in the - * hashtable. - */ -#define CP_REG_NS_SHIFT 29 -#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) - -#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ - ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ - ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) - -#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ - (CP_REG_AA64_MASK | \ - ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ - ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ - ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ - ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ - ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ - ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) - -/* Convert a full 64 bit KVM register ID to the truncated 32 bit - * version used as a key for the coprocessor register hashtable - */ -static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) -{ - uint32_t cpregid = kvmid; - if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { - cpregid |= CP_REG_AA64_MASK; - } else { - if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { - cpregid |= (1 << 15); - } - - /* KVM is always non-secure so add the NS flag on AArch32 register - * entries. - */ - cpregid |= 1 << CP_REG_NS_SHIFT; - } - return cpregid; -} - -/* Convert a truncated 32 bit hashtable key into the full - * 64 bit KVM register ID. - */ -static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) -{ - uint64_t kvmid; - - if (cpregid & CP_REG_AA64_MASK) { - kvmid = cpregid & ~CP_REG_AA64_MASK; - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; - } else { - kvmid = cpregid & ~(1 << 15); - if (cpregid & (1 << 15)) { - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; - } else { - kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; - } - } - return kvmid; -} - /* Return the highest implemented Exception Level */ static inline int arm_highest_el(CPUARMState *env) { -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> If a test was tagged with the "accel" tag and the specified accelerator it not present in the qemu binary, cancel the test. We can now write tests without explicit calls to require_accelerator, just the tag is enough. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/avocado_qemu/__init__.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/avocado/avocado_qemu/__init__.py b/tests/avocado/avocado_qemu/__init__.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/avocado_qemu/__init__.py +++ b/tests/avocado/avocado_qemu/__init__.py @@ -XXX,XX +XXX,XX @@ def setUp(self): super().setUp('qemu-system-') + accel_required = self._get_unique_tag_val('accel') + if accel_required: + self.require_accelerator(accel_required) + self.machine = self.params.get('machine', default=self._get_unique_tag_val('machine')) -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> This allows the test to be skipped when TCG is not present in the QEMU binary. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 1 + tests/avocado/reverse_debugging.py | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_orangepi_uboot_netbsd9(self): def test_aarch64_raspi3_atf(self): """ + :avocado: tags=accel:tcg :avocado: tags=arch:aarch64 :avocado: tags=machine:raspi3b :avocado: tags=cpu:cortex-a53 diff --git a/tests/avocado/reverse_debugging.py b/tests/avocado/reverse_debugging.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/reverse_debugging.py +++ b/tests/avocado/reverse_debugging.py @@ -XXX,XX +XXX,XX @@ def reverse_debugging(self, shift=7, args=None): vm.shutdown() class ReverseDebugging_X86_64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 0x10 REG_CS = 0x12 def get_pc(self, g): @@ -XXX,XX +XXX,XX @@ def test_x86_64_pc(self): self.reverse_debugging() class ReverseDebugging_AArch64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 32 # unidentified gitlab timeout problem -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) mc->minimum_page_bits = 12; mc->possible_cpu_arch_ids = virt_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = virt_cpu_index_to_props; +#ifdef CONFIG_TCG mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); +#else + mc->default_cpu_type = ARM_CPU_TYPE_NAME("max"); +#endif mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; assert(!mc->get_hotplug_handler); -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ #define SVE_MAX_VQ 16 #define MACHINE "-machine virt,gic-version=max -accel tcg " -#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm -accel tcg " +#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm " #define QUERY_HEAD "{ 'execute': 'query-cpu-model-expansion', " \ " 'arguments': { 'type': 'full', " #define QUERY_TAIL "}}" @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) { g_test_init(&argc, &argv, NULL); - qtest_add_data_func("/arm/query-cpu-model-expansion", - NULL, test_query_cpu_model_expansion); + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/query-cpu-model-expansion", + NULL, test_query_cpu_model_expansion); + } + + if (!g_str_equal(qtest_get_arch(), "aarch64")) { + goto out; + } /* * For now we only run KVM specific tests with AArch64 QEMU in * order avoid attempting to run an AArch32 QEMU with KVM on * AArch64 hosts. That won't work and isn't easy to detect. */ - if (g_str_equal(qtest_get_arch(), "aarch64") && qtest_has_accel("kvm")) { + if (qtest_has_accel("kvm")) { /* * This tests target the 'host' CPU type, so register it only if * KVM is available. */ qtest_add_data_func("/arm/kvm/query-cpu-model-expansion", NULL, test_query_cpu_model_expansion_kvm); - } - if (g_str_equal(qtest_get_arch(), "aarch64")) { - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", - NULL, sve_tests_sve_max_vq_8); - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", - NULL, sve_tests_sve_off); qtest_add_data_func("/arm/kvm/query-cpu-model-expansion/sve-off", NULL, sve_tests_sve_off_kvm); } + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", + NULL, sve_tests_sve_max_vq_8); + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", + NULL, sve_tests_sve_off); + } + +out: return g_test_run(); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> These tests set -accel tcg, so restrict them to when TCG is present. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_arm = \ # TODO: once aarch64 TCG is fixed on ARM 32 bit host, make bios-tables-test unconditional qtests_aarch64 = \ (cpu != 'arm' and unpack_edk2_blobs ? ['bios-tables-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \ + (config_all.has_key('CONFIG_TCG') and config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? \ + ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ ['arm-cpu-features', -- 2.34.1 First arm pullreq of the cycle; this is mostly my softfloat NaN handling series. (Lots more in my to-review queue, but I don't like pullreqs growing too close to a hundred patches at a time :-)) thanks -- PMM The following changes since commit 97f2796a3736ed37a1b85dc1c76a6c45b829dd17: Open 10.0 development tree (2024-12-10 17:41:17 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20241211 for you to fetch changes up to 1abe28d519239eea5cf9620bb13149423e5665f8: MAINTAINERS: Add correct email address for Vikram Garhwal (2024-12-11 15:31:09 +0000) ---------------------------------------------------------------- target-arm queue: * hw/net/lan9118: Extract PHY model, reuse with imx_fec, fix bugs * fpu: Make muladd NaN handling runtime-selected, not compile-time * fpu: Make default NaN pattern runtime-selected, not compile-time * fpu: Minor NaN-related cleanups * MAINTAINERS: email address updates ---------------------------------------------------------------- Bernhard Beschow (5): hw/net/lan9118: Extract lan9118_phy hw/net/lan9118_phy: Reuse in imx_fec and consolidate implementations hw/net/lan9118_phy: Fix off-by-one error in MII_ANLPAR register hw/net/lan9118_phy: Reuse MII constants hw/net/lan9118_phy: Add missing 100 mbps full duplex advertisement Leif Lindholm (1): MAINTAINERS: update email address for Leif Lindholm Peter Maydell (54): fpu: handle raising Invalid for infzero in pick_nan_muladd fpu: Check for default_nan_mode before calling pickNaNMulAdd softfloat: Allow runtime choice of inf * 0 + NaN result tests/fp: Explicitly set inf-zero-nan rule target/arm: Set FloatInfZeroNaNRule explicitly target/s390: Set FloatInfZeroNaNRule explicitly target/ppc: Set FloatInfZeroNaNRule explicitly target/mips: Set FloatInfZeroNaNRule explicitly target/sparc: Set FloatInfZeroNaNRule explicitly target/xtensa: Set FloatInfZeroNaNRule explicitly target/x86: Set FloatInfZeroNaNRule explicitly target/loongarch: Set FloatInfZeroNaNRule explicitly target/hppa: Set FloatInfZeroNaNRule explicitly softfloat: Pass have_snan to pickNaNMulAdd softfloat: Allow runtime choice of NaN propagation for muladd tests/fp: Explicitly set 3-NaN propagation rule target/arm: Set Float3NaNPropRule explicitly target/loongarch: Set Float3NaNPropRule explicitly target/ppc: Set Float3NaNPropRule explicitly target/s390x: Set Float3NaNPropRule explicitly target/sparc: Set Float3NaNPropRule explicitly target/mips: Set Float3NaNPropRule explicitly target/xtensa: Set Float3NaNPropRule explicitly target/i386: Set Float3NaNPropRule explicitly target/hppa: Set Float3NaNPropRule explicitly fpu: Remove use_first_nan field from float_status target/m68k: Don't pass NULL float_status to floatx80_default_nan() softfloat: Create floatx80 default NaN from parts64_default_nan target/loongarch: Use normal float_status in fclass_s and fclass_d helpers target/m68k: In frem helper, initialize local float_status from env->fp_status target/m68k: Init local float_status from env fp_status in gdb get/set reg target/sparc: Initialize local scratch float_status from env->fp_status target/ppc: Use env->fp_status in helper_compute_fprf functions fpu: Allow runtime choice of default NaN value tests/fp: Set default NaN pattern explicitly target/microblaze: Set default NaN pattern explicitly target/i386: Set default NaN pattern explicitly target/hppa: Set default NaN pattern explicitly target/alpha: Set default NaN pattern explicitly target/arm: Set default NaN pattern explicitly target/loongarch: Set default NaN pattern explicitly target/m68k: Set default NaN pattern explicitly target/mips: Set default NaN pattern explicitly target/openrisc: Set default NaN pattern explicitly target/ppc: Set default NaN pattern explicitly target/sh4: Set default NaN pattern explicitly target/rx: Set default NaN pattern explicitly target/s390x: Set default NaN pattern explicitly target/sparc: Set default NaN pattern explicitly target/xtensa: Set default NaN pattern explicitly target/hexagon: Set default NaN pattern explicitly target/riscv: Set default NaN pattern explicitly target/tricore: Set default NaN pattern explicitly fpu: Remove default handling for dnan_pattern Richard Henderson (11): target/arm: Copy entire float_status in is_ebf softfloat: Inline pickNaNMulAdd softfloat: Use goto for default nan case in pick_nan_muladd softfloat: Remove which from parts_pick_nan_muladd softfloat: Pad array size in pick_nan_muladd softfloat: Move propagateFloatx80NaN to softfloat.c softfloat: Use parts_pick_nan in propagateFloatx80NaN softfloat: Inline pickNaN softfloat: Share code between parts_pick_nan cases softfloat: Sink frac_cmp in parts_pick_nan until needed softfloat: Replace WHICH with RET in parts_pick_nan Vikram Garhwal (1): MAINTAINERS: Add correct email address for Vikram Garhwal MAINTAINERS | 4 +- include/fpu/softfloat-helpers.h | 38 +++- include/fpu/softfloat-types.h | 89 +++++++- include/hw/net/imx_fec.h | 9 +- include/hw/net/lan9118_phy.h | 37 ++++ include/hw/net/mii.h | 6 + target/mips/fpu_helper.h | 20 ++ target/sparc/helper.h | 4 +- fpu/softfloat.c | 19 ++ hw/net/imx_fec.c | 146 ++------------ hw/net/lan9118.c | 137 ++----------- hw/net/lan9118_phy.c | 222 ++++++++++++++++++++ linux-user/arm/nwfpe/fpa11.c | 5 + target/alpha/cpu.c | 2 + target/arm/cpu.c | 10 + target/arm/tcg/vec_helper.c | 20 +- target/hexagon/cpu.c | 2 + target/hppa/fpu_helper.c | 12 ++ target/i386/tcg/fpu_helper.c | 12 ++ target/loongarch/tcg/fpu_helper.c | 14 +- target/m68k/cpu.c | 14 +- target/m68k/fpu_helper.c | 6 +- target/m68k/helper.c | 6 +- target/microblaze/cpu.c | 2 + target/mips/msa.c | 10 + target/openrisc/cpu.c | 2 + target/ppc/cpu_init.c | 19 ++ target/ppc/fpu_helper.c | 3 +- target/riscv/cpu.c | 2 + target/rx/cpu.c | 2 + target/s390x/cpu.c | 5 + target/sh4/cpu.c | 2 + target/sparc/cpu.c | 6 + target/sparc/fop_helper.c | 8 +- target/sparc/translate.c | 4 +- target/tricore/helper.c | 2 + target/xtensa/cpu.c | 4 + target/xtensa/fpu_helper.c | 3 +- tests/fp/fp-bench.c | 7 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 7 + fpu/softfloat-parts.c.inc | 152 +++++++++++--- fpu/softfloat-specialize.c.inc | 412 ++------------------------------------ .mailmap | 5 +- hw/net/Kconfig | 5 + hw/net/meson.build | 1 + hw/net/trace-events | 10 +- 47 files changed, 778 insertions(+), 730 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c From: Bernhard Beschow <shentey@gmail.com> A very similar implementation of the same device exists in imx_fec. Prepare for a common implementation by extracting a device model into its own files. Some migration state has been moved into the new device model which breaks migration compatibility for the following machines: * smdkc210 * realview-* * vexpress-* * kzm * mps2-* While breaking migration ABI, fix the size of the MII registers to be 16 bit, as defined by IEEE 802.3u. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-2-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118_phy.h | 37 ++++++++ hw/net/lan9118.c | 137 +++++----------------------- hw/net/lan9118_phy.c | 169 +++++++++++++++++++++++++++++++++++ hw/net/Kconfig | 4 + hw/net/meson.build | 1 + 5 files changed, 233 insertions(+), 115 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c diff --git a/include/hw/net/lan9118_phy.h b/include/hw/net/lan9118_phy.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118_phy.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_PHY_H +#define HW_NET_LAN9118_PHY_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +#define TYPE_LAN9118_PHY "lan9118-phy" +OBJECT_DECLARE_SIMPLE_TYPE(Lan9118PhyState, LAN9118_PHY) + +typedef struct Lan9118PhyState { + SysBusDevice parent_obj; + + uint16_t status; + uint16_t control; + uint16_t advertise; + uint16_t ints; + uint16_t int_mask; + qemu_irq irq; + bool link_down; +} Lan9118PhyState; + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down); +void lan9118_phy_reset(Lan9118PhyState *s); +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg); +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val); + +#endif diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "net/net.h" #include "net/eth.h" #include "hw/irq.h" +#include "hw/net/lan9118_phy.h" #include "hw/net/lan9118.h" #include "hw/ptimer.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0) #define MAC_CR_RXEN 0x00000004 #define MAC_CR_RESERVED 0x7f404213 -#define PHY_INT_ENERGYON 0x80 -#define PHY_INT_AUTONEG_COMPLETE 0x40 -#define PHY_INT_FAULT 0x20 -#define PHY_INT_DOWN 0x10 -#define PHY_INT_AUTONEG_LP 0x08 -#define PHY_INT_PARFAULT 0x04 -#define PHY_INT_AUTONEG_PAGE 0x02 - #define GPT_TIMER_EN 0x20000000 /* @@ -XXX,XX +XXX,XX @@ struct lan9118_state { uint32_t mac_mii_data; uint32_t mac_flow; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; int32_t eeprom_writable; uint8_t eeprom[128]; @@ -XXX,XX +XXX,XX @@ struct lan9118_state { static const VMStateDescription vmstate_lan9118 = { .name = "lan9118", - .version_id = 2, - .minimum_version_id = 1, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_PTIMER(timer, lan9118_state), VMSTATE_UINT32(irq_cfg, lan9118_state), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118 = { VMSTATE_UINT32(mac_mii_acc, lan9118_state), VMSTATE_UINT32(mac_mii_data, lan9118_state), VMSTATE_UINT32(mac_flow, lan9118_state), - VMSTATE_UINT32(phy_status, lan9118_state), - VMSTATE_UINT32(phy_control, lan9118_state), - VMSTATE_UINT32(phy_advertise, lan9118_state), - VMSTATE_UINT32(phy_int, lan9118_state), - VMSTATE_UINT32(phy_int_mask, lan9118_state), VMSTATE_INT32(eeprom_writable, lan9118_state), VMSTATE_UINT8_ARRAY(eeprom, lan9118_state, 128), VMSTATE_INT32(tx_fifo_size, lan9118_state), @@ -XXX,XX +XXX,XX @@ static void lan9118_reload_eeprom(lan9118_state *s) lan9118_mac_changed(s); } -static void phy_update_irq(lan9118_state *s) +static void lan9118_update_irq(void *opaque, int n, int level) { - if (s->phy_int & s->phy_int_mask) { + lan9118_state *s = opaque; + + if (level) { s->int_sts |= PHY_INT; } else { s->int_sts &= ~PHY_INT; @@ -XXX,XX +XXX,XX @@ static void phy_update_irq(lan9118_state *s) lan9118_update(s); } -static void phy_update_link(lan9118_state *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - phy_update_irq(s); -} - static void lan9118_set_link(NetClientState *nc) { - phy_update_link(qemu_get_nic_opaque(nc)); -} - -static void phy_reset(lan9118_state *s) -{ - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - phy_update_link(s); + lan9118_phy_update_link(&LAN9118(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static void lan9118_reset(DeviceState *d) @@ -XXX,XX +XXX,XX @@ static void lan9118_reset(DeviceState *d) s->read_word_n = 0; s->write_word_n = 0; - phy_reset(s); - s->eeprom_writable = 0; lan9118_reload_eeprom(s); } @@ -XXX,XX +XXX,XX @@ static void do_tx_packet(lan9118_state *s) uint32_t status; /* FIXME: Honor TX disable, and allow queueing of packets. */ - if (s->phy_control & 0x4000) { + if (s->mii.control & 0x4000) { /* This assumes the receive routine doesn't touch the VLANClient. */ qemu_receive_packet(qemu_get_queue(s->nic), s->txp->data, s->txp->len); } else { @@ -XXX,XX +XXX,XX @@ static void tx_fifo_push(lan9118_state *s, uint32_t val) } } -static uint32_t do_phy_read(lan9118_state *s, int reg) -{ - uint32_t val; - - switch (reg) { - case 0: /* Basic Control */ - return s->phy_control; - case 1: /* Basic Status */ - return s->phy_status; - case 2: /* ID1 */ - return 0x0007; - case 3: /* ID2 */ - return 0xc0d1; - case 4: /* Auto-neg advertisement */ - return s->phy_advertise; - case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; - case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - phy_update_irq(s); - return val; - case 30: /* Interrupt mask */ - return s->phy_int_mask; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_read: PHY read reg %d\n", reg); - return 0; - } -} - -static void do_phy_write(lan9118_state *s, int reg, uint32_t val) -{ - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - phy_reset(s); - break; - } - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - /* TODO 17, 18, 27, 31 */ - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - phy_update_irq(s); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_write: PHY write reg %d = 0x%04x\n", reg, val); - } -} - static void do_mac_write(lan9118_state *s, int reg, uint32_t val) { switch (reg) { @@ -XXX,XX +XXX,XX @@ static void do_mac_write(lan9118_state *s, int reg, uint32_t val) if (val & 2) { DPRINTF("PHY write %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); - do_phy_write(s, (val >> 6) & 0x1f, s->mac_mii_data); + lan9118_phy_write(&s->mii, (val >> 6) & 0x1f, s->mac_mii_data); } else { - s->mac_mii_data = do_phy_read(s, (val >> 6) & 0x1f); + s->mac_mii_data = lan9118_phy_read(&s->mii, (val >> 6) & 0x1f); DPRINTF("PHY read %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); } @@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset, break; case CSR_PMT_CTRL: if (val & 0x400) { - phy_reset(s); + lan9118_phy_reset(&s->mii); } s->pmt_ctrl &= ~0x34e; s->pmt_ctrl |= (val & 0x34e); @@ -XXX,XX +XXX,XX @@ static void lan9118_realize(DeviceState *dev, Error **errp) const MemoryRegionOps *mem_ops = s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops; + qemu_init_irq(&s->mii_irq, lan9118_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + memory_region_init_io(&s->mmio, OBJECT(dev), mem_ops, s, "lan9118-mmio", 0x100); sysbus_init_mmio(sbd, &s->mmio); diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This code is licensed under the GNU GPL v2 + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" +#include "hw/resettable.h" +#include "migration/vmstate.h" +#include "qemu/log.h" + +#define PHY_INT_ENERGYON (1 << 7) +#define PHY_INT_AUTONEG_COMPLETE (1 << 6) +#define PHY_INT_FAULT (1 << 5) +#define PHY_INT_DOWN (1 << 4) +#define PHY_INT_AUTONEG_LP (1 << 3) +#define PHY_INT_PARFAULT (1 << 2) +#define PHY_INT_AUTONEG_PAGE (1 << 1) + +static void lan9118_phy_update_irq(Lan9118PhyState *s) +{ + qemu_set_irq(s->irq, !!(s->ints & s->int_mask)); +} + +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) +{ + uint16_t val; + + switch (reg) { + case 0: /* Basic Control */ + return s->control; + case 1: /* Basic Status */ + return s->status; + case 2: /* ID1 */ + return 0x0007; + case 3: /* ID2 */ + return 0xc0d1; + case 4: /* Auto-neg advertisement */ + return s->advertise; + case 5: /* Auto-neg Link Partner Ability */ + return 0x0f71; + case 6: /* Auto-neg Expansion */ + return 1; + /* TODO 17, 18, 27, 29, 30, 31 */ + case 29: /* Interrupt source. */ + val = s->ints; + s->ints = 0; + lan9118_phy_update_irq(s); + return val; + case 30: /* Interrupt mask */ + return s->int_mask; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_read: PHY read reg %d\n", reg); + return 0; + } +} + +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) +{ + switch (reg) { + case 0: /* Basic Control */ + if (val & 0x8000) { + lan9118_phy_reset(s); + break; + } + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } + break; + case 4: /* Auto-neg advertisement */ + s->advertise = (val & 0x2d7f) | 0x80; + break; + /* TODO 17, 18, 27, 31 */ + case 30: /* Interrupt mask */ + s->int_mask = val & 0xff; + lan9118_phy_update_irq(s); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + } +} + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) +{ + s->link_down = link_down; + + /* Autonegotiation status mirrors link status. */ + if (link_down) { + s->status &= ~0x0024; + s->ints |= PHY_INT_DOWN; + } else { + s->status |= 0x0024; + s->ints |= PHY_INT_ENERGYON; + s->ints |= PHY_INT_AUTONEG_COMPLETE; + } + lan9118_phy_update_irq(s); +} + +void lan9118_phy_reset(Lan9118PhyState *s) +{ + s->control = 0x3000; + s->status = 0x7809; + s->advertise = 0x01e1; + s->int_mask = 0; + s->ints = 0; + lan9118_phy_update_link(s, s->link_down); +} + +static void lan9118_phy_reset_hold(Object *obj, ResetType type) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + lan9118_phy_reset(s); +} + +static void lan9118_phy_init(Object *obj) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + qdev_init_gpio_out(DEVICE(s), &s->irq, 1); +} + +static const VMStateDescription vmstate_lan9118_phy = { + .name = "lan9118-phy", + .version_id = 1, + .minimum_version_id = 1, + .fields = (const VMStateField[]) { + VMSTATE_UINT16(control, Lan9118PhyState), + VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(advertise, Lan9118PhyState), + VMSTATE_UINT16(ints, Lan9118PhyState), + VMSTATE_UINT16(int_mask, Lan9118PhyState), + VMSTATE_BOOL(link_down, Lan9118PhyState), + VMSTATE_END_OF_LIST() + } +}; + +static void lan9118_phy_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + rc->phases.hold = lan9118_phy_reset_hold; + dc->vmsd = &vmstate_lan9118_phy; +} + +static const TypeInfo types[] = { + { + .name = TYPE_LAN9118_PHY, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Lan9118PhyState), + .instance_init = lan9118_phy_init, + .class_init = lan9118_phy_class_init, + } +}; + +DEFINE_TYPES(types) diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config VMXNET3_PCI config SMC91C111 bool +config LAN9118_PHY + bool + config LAN9118 bool + select LAN9118_PHY select PTIMER config NE2000_ISA diff --git a/hw/net/meson.build b/hw/net/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_VMXNET3_PCI', if_true: files('vmxnet3.c')) system_ss.add(when: 'CONFIG_SMC91C111', if_true: files('smc91c111.c')) system_ss.add(when: 'CONFIG_LAN9118', if_true: files('lan9118.c')) +system_ss.add(when: 'CONFIG_LAN9118_PHY', if_true: files('lan9118_phy.c')) system_ss.add(when: 'CONFIG_NE2000_ISA', if_true: files('ne2000-isa.c')) system_ss.add(when: 'CONFIG_OPENCORES_ETH', if_true: files('opencores_eth.c')) system_ss.add(when: 'CONFIG_XGMAC', if_true: files('xgmac.c')) -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> imx_fec models the same PHY as lan9118_phy. The code is almost the same with imx_fec having more logging and tracing. Merge these improvements into lan9118_phy and reuse in imx_fec to fix the code duplication. Some migration state how resides in the new device model which breaks migration compatibility for the following machines: * imx25-pdk * sabrelite * mcimx7d-sabre * mcimx6ul-evk Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-3-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/imx_fec.h | 9 ++- hw/net/imx_fec.c | 146 ++++----------------------------------- hw/net/lan9118_phy.c | 82 ++++++++++++++++------ hw/net/Kconfig | 1 + hw/net/trace-events | 10 +-- 5 files changed, 85 insertions(+), 163 deletions(-) diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXFECState, IMX_FEC) #define TYPE_IMX_ENET "imx.enet" #include "hw/sysbus.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" #include "net/net.h" #define ENET_EIR 1 @@ -XXX,XX +XXX,XX @@ struct IMXFECState { uint32_t tx_descriptor[ENET_TX_RING_NUM]; uint32_t tx_ring_num; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; uint32_t phy_num; bool phy_connected; struct IMXFECState *phy_consumer; diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth_txdescs = { static const VMStateDescription vmstate_imx_eth = { .name = TYPE_IMX_FEC, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, IMXFECState, ENET_MAX), VMSTATE_UINT32(rx_descriptor, IMXFECState), VMSTATE_UINT32(tx_descriptor[0], IMXFECState), - VMSTATE_UINT32(phy_status, IMXFECState), - VMSTATE_UINT32(phy_control, IMXFECState), - VMSTATE_UINT32(phy_advertise, IMXFECState), - VMSTATE_UINT32(phy_int, IMXFECState), - VMSTATE_UINT32(phy_int_mask, IMXFECState), VMSTATE_END_OF_LIST() }, .subsections = (const VMStateDescription * const []) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth = { }, }; -#define PHY_INT_ENERGYON (1 << 7) -#define PHY_INT_AUTONEG_COMPLETE (1 << 6) -#define PHY_INT_FAULT (1 << 5) -#define PHY_INT_DOWN (1 << 4) -#define PHY_INT_AUTONEG_LP (1 << 3) -#define PHY_INT_PARFAULT (1 << 2) -#define PHY_INT_AUTONEG_PAGE (1 << 1) - static void imx_eth_update(IMXFECState *s); /* @@ -XXX,XX +XXX,XX @@ static void imx_eth_update(IMXFECState *s); * For now we don't handle any GPIO/interrupt line, so the OS will * have to poll for the PHY status. */ -static void imx_phy_update_irq(IMXFECState *s) +static void imx_phy_update_irq(void *opaque, int n, int level) { - imx_eth_update(s); -} - -static void imx_phy_update_link(IMXFECState *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - trace_imx_phy_update_link("down"); - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - trace_imx_phy_update_link("up"); - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - imx_phy_update_irq(s); + imx_eth_update(opaque); } static void imx_eth_set_link(NetClientState *nc) { - imx_phy_update_link(IMX_FEC(qemu_get_nic_opaque(nc))); -} - -static void imx_phy_reset(IMXFECState *s) -{ - trace_imx_phy_reset(); - - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - imx_phy_update_link(s); + lan9118_phy_update_link(&IMX_FEC(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static uint32_t imx_phy_read(IMXFECState *s, int reg) { - uint32_t val; uint32_t phy = reg / 32; if (!s->phy_connected) { @@ -XXX,XX +XXX,XX @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) reg %= 32; - switch (reg) { - case 0: /* Basic Control */ - val = s->phy_control; - break; - case 1: /* Basic Status */ - val = s->phy_status; - break; - case 2: /* ID1 */ - val = 0x0007; - break; - case 3: /* ID2 */ - val = 0xc0d1; - break; - case 4: /* Auto-neg advertisement */ - val = s->phy_advertise; - break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; - break; - case 6: /* Auto-neg Expansion */ - val = 1; - break; - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - imx_phy_update_irq(s); - break; - case 30: /* Interrupt mask */ - val = s->phy_int_mask; - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy]%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - } - - trace_imx_phy_read(val, phy, reg); - - return val; + return lan9118_phy_read(&s->mii, reg); } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) @@ -XXX,XX +XXX,XX @@ static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) reg %= 32; - trace_imx_phy_write(val, phy, reg); - - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - imx_phy_reset(s); - } else { - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - imx_phy_update_irq(s); - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy)%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - break; - } + lan9118_phy_write(&s->mii, reg, val); } static void imx_fec_read_bd(IMXFECBufDesc *bd, dma_addr_t addr) @@ -XXX,XX +XXX,XX @@ static void imx_eth_reset(DeviceState *d) s->rx_descriptor = 0; memset(s->tx_descriptor, 0, sizeof(s->tx_descriptor)); - - /* We also reset the PHY */ - imx_phy_reset(s); } static uint32_t imx_default_read(IMXFECState *s, uint32_t index) @@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp) sysbus_init_irq(sbd, &s->irq[0]); sysbus_init_irq(sbd, &s->irq[1]); + qemu_init_irq(&s->mii_irq, imx_phy_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + qemu_macaddr_default_if_unset(&s->conf.macaddr); s->nic = qemu_new_nic(&imx_eth_net_info, &s->conf, diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ * Copyright (c) 2009 CodeSourcery, LLC. * Written by Paul Brook * + * Copyright (c) 2013 Jean-Christophe Dubois. <jcd@tribudubois.net> + * * This code is licensed under the GNU GPL v2 * * Contributions after 2012-01-13 are licensed under the terms of the @@ -XXX,XX +XXX,XX @@ #include "hw/resettable.h" #include "migration/vmstate.h" #include "qemu/log.h" +#include "trace.h" #define PHY_INT_ENERGYON (1 << 7) #define PHY_INT_AUTONEG_COMPLETE (1 << 6) @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) switch (reg) { case 0: /* Basic Control */ - return s->control; + val = s->control; + break; case 1: /* Basic Status */ - return s->status; + val = s->status; + break; case 2: /* ID1 */ - return 0x0007; + val = 0x0007; + break; case 3: /* ID2 */ - return 0xc0d1; + val = 0xc0d1; + break; case 4: /* Auto-neg advertisement */ - return s->advertise; + val = s->advertise; + break; case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; + val = 0x0f71; + break; case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ + val = 1; + break; case 29: /* Interrupt source. */ val = s->ints; s->ints = 0; lan9118_phy_update_irq(s); - return val; + break; case 30: /* Interrupt mask */ - return s->int_mask; + val = s->int_mask; + break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + val = 0; + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_read: PHY read reg %d\n", reg); - return 0; + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + val = 0; + break; } + + trace_lan9118_phy_read(val, reg); + + return val; } void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) { + trace_lan9118_phy_write(val, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { lan9118_phy_reset(s); - break; - } - s->control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + } else { + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } } break; case 4: /* Auto-neg advertisement */ s->advertise = (val & 0x2d7f) | 0x80; break; - /* TODO 17, 18, 27, 31 */ case 30: /* Interrupt mask */ s->int_mask = val & 0xff; lan9118_phy_update_irq(s); break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + break; } } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { + trace_lan9118_phy_update_link("down"); s->status &= ~0x0024; s->ints |= PHY_INT_DOWN; } else { + trace_lan9118_phy_update_link("up"); s->status |= 0x0024; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) void lan9118_phy_reset(Lan9118PhyState *s) { + trace_lan9118_phy_reset(); + s->control = 0x3000; s->status = 0x7809; s->advertise = 0x01e1; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_phy = { .version_id = 1, .minimum_version_id = 1, .fields = (const VMStateField[]) { - VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(advertise, Lan9118PhyState), VMSTATE_UINT16(ints, Lan9118PhyState), VMSTATE_UINT16(int_mask, Lan9118PhyState), diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_SUN8I_EMAC config IMX_FEC bool + select LAN9118_PHY config CADENCE bool diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u" allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64 allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64 +# lan9118_phy.c +lan9118_phy_read(uint16_t val, int reg) "[0x%02x] -> 0x%04" PRIx16 +lan9118_phy_write(uint16_t val, int reg) "[0x%02x] <- 0x%04" PRIx16 +lan9118_phy_update_link(const char *s) "%s" +lan9118_phy_reset(void) "" + # lance.c lance_mem_readw(uint64_t addr, uint32_t ret) "addr=0x%"PRIx64"val=0x%04x" lance_mem_writew(uint64_t addr, uint32_t val) "addr=0x%"PRIx64"val=0x%04x" @@ -XXX,XX +XXX,XX @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" imx_phy_read_num(int phy, int configured) "read request from unconfigured phy %d (configured %d)" -imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_write_num(int phy, int configured) "write request to unconfigured phy %d (configured %d)" -imx_phy_update_link(const char *s) "%s" -imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" imx_enet_read_bd(uint64_t addr, int flags, int len, int data, int options, int status) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x option 0x%04x status 0x%04x" imx_eth_tx_bd_busy(void) "tx_bd ran out of descriptors to transmit" -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Turns 0x70 into 0xe0 (== 0x70 << 1) which adds the missing MII_ANLPAR_TX and fixes the MSB of selector field to be zero, as specified in the datasheet. Fixes: 2a424990170b "LAN9118 emulation" Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-4-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) val = s->advertise; break; case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; + val = 0x0fe1; break; case 6: /* Auto-neg Expansion */ val = 1; -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Prefer named constants over magic values for better readability. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-5-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/mii.h | 6 +++++ hw/net/lan9118_phy.c | 63 ++++++++++++++++++++++++++++---------------- 2 files changed, 46 insertions(+), 23 deletions(-) diff --git a/include/hw/net/mii.h b/include/hw/net/mii.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/mii.h +++ b/include/hw/net/mii.h @@ -XXX,XX +XXX,XX @@ #define MII_BMSR_JABBER (1 << 1) /* Jabber detected */ #define MII_BMSR_EXTCAP (1 << 0) /* Ext-reg capability */ +#define MII_ANAR_RFAULT (1 << 13) /* Say we can detect faults */ #define MII_ANAR_PAUSE_ASYM (1 << 11) /* Try for asymmetric pause */ #define MII_ANAR_PAUSE (1 << 10) /* Try for pause */ #define MII_ANAR_TXFD (1 << 8) @@ -XXX,XX +XXX,XX @@ #define MII_ANAR_10FD (1 << 6) #define MII_ANAR_10 (1 << 5) #define MII_ANAR_CSMACD (1 << 0) +#define MII_ANAR_SELECT (0x001f) /* Selector bits */ #define MII_ANLPAR_ACK (1 << 14) #define MII_ANLPAR_PAUSEASY (1 << 11) /* can pause asymmetrically */ @@ -XXX,XX +XXX,XX @@ #define RTL8201CP_PHYID1 0x0000 #define RTL8201CP_PHYID2 0x8201 +/* SMSC LAN9118 */ +#define SMSCLAN9118_PHYID1 0x0007 +#define SMSCLAN9118_PHYID2 0xc0d1 + /* RealTek 8211E */ #define RTL8211E_PHYID1 0x001c #define RTL8211E_PHYID2 0xc915 diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/net/lan9118_phy.h" +#include "hw/net/mii.h" #include "hw/irq.h" #include "hw/resettable.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) uint16_t val; switch (reg) { - case 0: /* Basic Control */ + case MII_BMCR: val = s->control; break; - case 1: /* Basic Status */ + case MII_BMSR: val = s->status; break; - case 2: /* ID1 */ - val = 0x0007; + case MII_PHYID1: + val = SMSCLAN9118_PHYID1; break; - case 3: /* ID2 */ - val = 0xc0d1; + case MII_PHYID2: + val = SMSCLAN9118_PHYID2; break; - case 4: /* Auto-neg advertisement */ + case MII_ANAR: val = s->advertise; break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0fe1; + case MII_ANLPAR: + val = MII_ANLPAR_PAUSEASY | MII_ANLPAR_PAUSE | MII_ANLPAR_T4 | + MII_ANLPAR_TXFD | MII_ANLPAR_TX | MII_ANLPAR_10FD | + MII_ANLPAR_10 | MII_ANLPAR_CSMACD; break; - case 6: /* Auto-neg Expansion */ - val = 1; + case MII_ANER: + val = MII_ANER_NWAY; break; case 29: /* Interrupt source. */ val = s->ints; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) trace_lan9118_phy_write(val, reg); switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { + case MII_BMCR: + if (val & MII_BMCR_RESET) { lan9118_phy_reset(s); } else { - s->control = val & 0x7980; + s->control = val & (MII_BMCR_LOOPBACK | MII_BMCR_SPEED100 | + MII_BMCR_AUTOEN | MII_BMCR_PDOWN | MII_BMCR_FD | + MII_BMCR_CTST); /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + if (val & MII_BMCR_AUTOEN) { + s->status |= MII_BMSR_AN_COMP; } } break; - case 4: /* Auto-neg advertisement */ - s->advertise = (val & 0x2d7f) | 0x80; + case MII_ANAR: + s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | + MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | + MII_ANAR_SELECT)) + | MII_ANAR_TX; break; case 30: /* Interrupt mask */ s->int_mask = val & 0xff; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { trace_lan9118_phy_update_link("down"); - s->status &= ~0x0024; + s->status &= ~(MII_BMSR_AN_COMP | MII_BMSR_LINK_ST); s->ints |= PHY_INT_DOWN; } else { trace_lan9118_phy_update_link("up"); - s->status |= 0x0024; + s->status |= MII_BMSR_AN_COMP | MII_BMSR_LINK_ST; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_reset(Lan9118PhyState *s) { trace_lan9118_phy_reset(); - s->control = 0x3000; - s->status = 0x7809; - s->advertise = 0x01e1; + s->control = MII_BMCR_AUTOEN | MII_BMCR_SPEED100; + s->status = MII_BMSR_100TX_FD + | MII_BMSR_100TX_HD + | MII_BMSR_10T_FD + | MII_BMSR_10T_HD + | MII_BMSR_AUTONEG + | MII_BMSR_EXTCAP; + s->advertise = MII_ANAR_TXFD + | MII_ANAR_TX + | MII_ANAR_10FD + | MII_ANAR_10 + | MII_ANAR_CSMACD; s->int_mask = 0; s->ints = 0; lan9118_phy_update_link(s, s->link_down); -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> The real device advertises this mode and the device model already advertises 100 mbps half duplex and 10 mbps full+half duplex. So advertise this mode to make the model more realistic. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-6-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) break; case MII_ANAR: s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | - MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | - MII_ANAR_SELECT)) + MII_ANAR_PAUSE | MII_ANAR_TXFD | MII_ANAR_10FD | + MII_ANAR_10 | MII_ANAR_SELECT)) | MII_ANAR_TX; break; case 30: /* Interrupt mask */ -- 2.34.1 For IEEE fused multiply-add, the (0 * inf) + NaN case should raise Invalid for the multiplication of 0 by infinity. Currently we handle this in the per-architecture ifdef ladder in pickNaNMulAdd(). However, since this isn't really architecture specific we can hoist it up to the generic code. For the cases where the infzero test in pickNaNMulAdd was returning 2, we can delete the check entirely and allow the code to fall into the normal pick-a-NaN handling, because this will return 2 anyway (input 'c' being the only NaN in this case). For the cases where infzero was returning 3 to indicate "return the default NaN", we must retain that "return 3". For Arm, this looks like it might be a behaviour change because we used to set float_flag_invalid | float_flag_invalid_imz only if C is a quiet NaN. However, it is not, because Arm target code never looks at float_flag_invalid_imz, and for the (0 * inf) + SNaN case we already raised float_flag_invalid via the "abc_mask & float_cmask_snan" check in pick_nan_muladd. For any target architecture using the "default implementation" at the bottom of the ifdef, this is a behaviour change but will be fixing a bug (where we failed to raise the Invalid exception for (0 * inf + QNaN). The architectures using the default case are: * hppa * i386 * sh4 * tricore The x86, Tricore and SH4 CPU architecture manuals are clear that this should have raised Invalid; HPPA is a bit vaguer but still seems clear enough. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-2-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 13 +++++++------ fpu/softfloat-specialize.c.inc | 29 +---------------------------- 2 files changed, 8 insertions(+), 34 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, int ab_mask, int abc_mask) { int which; + bool infzero = (ab_mask == float_cmask_infzero); if (unlikely(abc_mask & float_cmask_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, - ab_mask == float_cmask_infzero, s); + if (infzero) { + /* This is (0 * inf) + NaN or (inf * 0) + NaN */ + float_raise(float_flag_invalid | float_flag_invalid_imz, s); + } + + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); if (s->default_nan_mode || which == 3) { - /* - * Note that this check is after pickNaNMulAdd so that function - * has an opportunity to set the Invalid flag for infzero. - */ parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * the default NaN */ if (infzero && is_qnan(c_cls)) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * case sets InvalidOp and returns the default NaN */ if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } /* Prefer sNaN over qNaN, in the a, b, c order. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } + /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * to return an input NaN if we have one (ie c) rather than generating * a default NaN */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_RISCV) - /* For RISC-V, InvalidOp is set when multiplicands are Inf and zero */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - } return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } #elif defined(TARGET_SPARC) - /* For (inf,0,nan) return c. */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer SNaN over QNaN, order C, B, A. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns * an input NaN if we have one (ie c). */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } if (status->use_first_nan) { if (is_nan(a_cls)) { return 0; -- 2.34.1 If the target sets default_nan_mode then we're always going to return the default NaN, and pickNaNMulAdd() no longer has any side effects. For consistency with pickNaN(), check for default_nan_mode before calling pickNaNMulAdd(). When we convert pickNaNMulAdd() to allow runtime selection of the NaN propagation rule, this means we won't have to make the targets which use default_nan_mode also set a propagation rule. Since RiscV always uses default_nan_mode, this allows us to remove its ifdef case from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-3-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 8 ++++++-- fpu/softfloat-specialize.c.inc | 9 +++++++-- 2 files changed, 13 insertions(+), 4 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, float_raise(float_flag_invalid | float_flag_invalid_imz, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + if (s->default_nan_mode) { + which = 3; + } else { + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + } - if (s->default_nan_mode || which == 3) { + if (which == 3) { parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ + assert(!status->default_nan_mode); #if defined(TARGET_ARM) /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns * the default NaN @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { return 1; } -#elif defined(TARGET_RISCV) - return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { return 3; -- 2.34.1 IEEE 758 does not define a fixed rule for what NaN to return in the case of a fused multiply-add of inf * 0 + NaN. Different architectures thus do different things: * some return the default NaN * some return the input NaN * Arm returns the default NaN if the input NaN is quiet, and the input NaN if it is signalling We want to make this logic be runtime selected rather than hardcoded into the binary, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. Note that four architectures both use the muladd softfloat functions and did not have a branch of the ifdef ladder to specify their behaviour (and so were ending up with the "default" case, probably wrongly): i386, HPPA, SH4 and Tricore. SH4 and Tricore both set default_nan_mode, and so will never get into pickNaNMulAdd(). For HPPA and i386 we retain the same behaviour as the old default-case, which is to not ever return the default NaN. This might not be correct but it is not a behaviour change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-4-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 ++++ include/fpu/softfloat-types.h | 23 +++++++++ fpu/softfloat-specialize.c.inc | 91 ++++++++++++++++++++++----------- 3 files changed, 95 insertions(+), 30 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, + float_status *status) +{ + status->float_infzeronan_rule = rule; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) +{ + return status->float_infzeronan_rule; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * Rule for result of fused multiply-add 0 * Inf + NaN. + * This must be a NaN, but implementations differ on whether this + * is the input NaN or the default NaN. + * + * You don't need to set this if default_nan_mode is enabled. + * When not in default-NaN mode, it is an error for the target + * not to set the rule in float_status if it uses muladd, and we + * will assert if we need to handle an input NaN and no rule was + * selected. + */ +typedef enum __attribute__((__packed__)) { + /* No propagation rule specified */ + float_infzeronan_none = 0, + /* Result is never the default NaN (so always the input NaN) */ + float_infzeronan_dnan_never, + /* Result is always the default NaN */ + float_infzeronan_dnan_always, + /* Result is the default NaN if the input NaN is quiet */ + float_infzeronan_dnan_if_qnan, +} FloatInfZeroNaNRule; + /* * Floating Point Status. Individual architectures may maintain * several versions of float_status for different functions. The @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ bool flush_to_zero; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + FloatInfZeroNaNRule rule = status->float_infzeronan_rule; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * specify. */ assert(!status->default_nan_mode); + + if (rule == float_infzeronan_none) { + /* + * Temporarily fall back to ifdef ladder + */ #if defined(TARGET_ARM) - /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns - * the default NaN - */ - if (infzero && is_qnan(c_cls)) { - return 3; + /* + * For ARM, the (inf,zero,qnan) case returns the default NaN, + * but (inf,zero,snan) returns the input NaN. + */ + rule = float_infzeronan_dnan_if_qnan; +#elif defined(TARGET_MIPS) + if (snan_bit_is_one(status)) { + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN + */ + rule = float_infzeronan_dnan_always; + } else { + /* + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + rule = float_infzeronan_dnan_never; + } +#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ + defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ + defined(TARGET_I386) || defined(TARGET_LOONGARCH) + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + rule = float_infzeronan_dnan_never; +#elif defined(TARGET_S390X) + rule = float_infzeronan_dnan_always; +#endif } + if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the default NaN here, + * and some return the input NaN. + */ + switch (rule) { + case float_infzeronan_dnan_never: + return 2; + case float_infzeronan_dnan_always: + return 3; + case float_infzeronan_dnan_if_qnan: + return is_qnan(c_cls) ? 3 : 2; + default: + g_assert_not_reached(); + } + } + +#if defined(TARGET_ARM) + /* This looks different from the ARM ARM pseudocode, because the ARM ARM * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } #elif defined(TARGET_MIPS) if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - if (infzero) { - return 3; - } /* Prefer sNaN over qNaN, in the a, b, c order. */ if (is_snan(a_cls)) { return 0; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } #elif defined(TARGET_LOONGARCH64) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_PPC) - /* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_S390X) - if (infzero) { - return 3; - } - if (is_snan(a_cls)) { return 0; } else if (is_snan(b_cls)) { -- 2.34.1 Explicitly set a rule in the softfloat tests for the inf-zero-nan muladd special case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_infzeronan_dnan_if_qnan. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241202131347.498124-5-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 5 +++++ tests/fp/fp-test.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) { bench_func_t f; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) { unsigned int i; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); verCases_maxErrorCount = n_max_errors; -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the Arm target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-6-peter.maydell@linaro.org --- target/arm/cpu.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, + * and the input NaN if it is signalling */ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_ARM) - /* - * For ARM, the (inf,zero,qnan) case returns the default NaN, - * but (inf,zero,snan) returns the input NaN. - */ - rule = float_infzeronan_dnan_if_qnan; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { /* * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for s390, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-7-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_infzeronan_rule(float_infzeronan_dnan_always, + &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * a default NaN */ rule = float_infzeronan_dnan_never; -#elif defined(TARGET_S390X) - rule = float_infzeronan_dnan_always; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the PPC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-8-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ rule = float_infzeronan_dnan_never; } -#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ +#elif defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - /* - * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the MIPS target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-9-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 9 +++++++++ target/mips/msa.c | 4 ++++ fpu/softfloat-specialize.c.inc | 16 +--------------- 3 files changed, 14 insertions(+), 15 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_flush_mode(CPUMIPSState *env) static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); + FloatInfZeroNaNRule izn_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ set_snan_bit_is_one(!nan2008, &env->active_fpu.fp_status); set_default_nan_mode(!nan2008, &env->active_fpu.fp_status); + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN. + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c'. + */ + izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; + set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* set proper signanling bit meaning ("1" means "quiet") */ set_snan_bit_is_one(0, &env->active_tc.msa_fp_status); + + /* Inf * 0 + NaN returns the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, + &env->active_tc.msa_fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - rule = float_infzeronan_dnan_always; - } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - rule = float_infzeronan_dnan_never; - } -#elif defined(TARGET_SPARC) || \ +#if defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the SPARC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-10-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_SPARC) || \ - defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the xtensa target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-11-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) reset_mmu(env); cs->halted = env->runstall; #endif + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the x86 target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-12-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->mmx_status); set_float_2nan_prop_rule(float_2nan_prop_x87, &env->sse_status); + /* + * Only SSE has multiply-add instructions. In the SDM Section 14.5.2 + * "Fused-Multiply-ADD (FMA) Numeric Behavior" the NaN handling is + * specified -- for 0 * inf + NaN the input NaN is selected, and if + * there are multiple input NaNs they are selected in the order a, b, c. + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * Temporarily fall back to ifdef ladder */ #if defined(TARGET_HPPA) || \ - defined(TARGET_I386) || defined(TARGET_LOONGARCH) + defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the loongarch target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-13-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 5 +++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) &env->fp_status); set_flush_to_zero(0, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_HPPA) || \ - defined(TARGET_LOONGARCH) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ +#if defined(TARGET_HPPA) rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the HPPA target, so we can remove the ifdef from pickNaNMulAdd(). As this is the last target to be converted to explicitly setting the rule, we can remove the fallback code in pickNaNMulAdd() entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-14-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 13 +------------ 2 files changed, 3 insertions(+), 12 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { - FloatInfZeroNaNRule rule = status->float_infzeronan_rule; - /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ assert(!status->default_nan_mode); - if (rule == float_infzeronan_none) { - /* - * Temporarily fall back to ifdef ladder - */ -#if defined(TARGET_HPPA) - rule = float_infzeronan_dnan_never; -#endif - } - if (infzero) { /* * Inf * 0 + NaN -- some implementations return the default NaN here, * and some return the input NaN. */ - switch (rule) { + switch (status->float_infzeronan_rule) { case float_infzeronan_dnan_never: return 2; case float_infzeronan_dnan_always: -- 2.34.1 The new implementation of pickNaNMulAdd() will find it convenient to know whether at least one of the three arguments to the muladd was a signaling NaN. We already calculate that in the caller, so pass it in as a new bool have_snan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-15-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 5 +++-- fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, { int which; bool infzero = (ab_mask == float_cmask_infzero); + bool have_snan = (abc_mask & float_cmask_snan); - if (unlikely(abc_mask & float_cmask_snan)) { + if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, if (s->default_nan_mode) { which = 3; } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, | Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN *----------------------------------------------------------------------------*/ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, float_status *status) + bool infzero, bool have_snan, float_status *status) { /* * We guarantee not to require the target to tell us how to -- 2.34.1 IEEE 758 does not define a fixed rule for which NaN to pick as the result if both operands of a 3-operand fused multiply-add operation are NaNs. As a result different architectures have ended up with different rules for propagating NaNs. QEMU currently hardcodes the NaN propagation logic into the binary because pickNaNMulAdd() has an ifdef ladder for different targets. We want to make the propagation rule instead be selectable at runtime, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. It's valid not to set a propagation rule if default_nan_mode is enabled, because in that case there's no need to pick a NaN; all the callers of pickNaNMulAdd() catch this case and skip calling it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-16-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++ include/fpu/softfloat-types.h | 55 +++++++++++ fpu/softfloat-specialize.c.inc | 167 ++++++++------------------------ 3 files changed, 107 insertions(+), 126 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_3nan_prop_rule(Float3NaNPropRule rule, + float_status *status) +{ + status->float_3nan_prop_rule = rule; +} + static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, float_status *status) { @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline Float3NaNPropRule get_float_3nan_prop_rule(float_status *status) +{ + return status->float_3nan_prop_rule; +} + static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) { return status->float_infzeronan_rule; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ this code that are retained. #ifndef SOFTFLOAT_TYPES_H #define SOFTFLOAT_TYPES_H +#include "hw/registerfields.h" + /* * Software IEC/IEEE floating-point types. */ @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * 3-input NaN propagation rule, for fused multiply-add. Individual + * architectures have different rules for which input NaN is + * propagated to the output when there is more than one NaN on the + * input. + * + * If default_nan_mode is enabled then it is valid not to set a NaN + * propagation rule, because the softfloat code guarantees not to try + * to pick a NaN to propagate in default NaN mode. When not in + * default-NaN mode, it is an error for the target not to set the rule + * in float_status if it uses a muladd, and we will assert if we need + * to handle an input NaN and no rule was selected. + * + * The naming scheme for Float3NaNPropRule values is: + * float_3nan_prop_s_abc: + * = "Prefer SNaN over QNaN, then operand A over B over C" + * float_3nan_prop_abc: + * = "Prefer A over B over C regardless of SNaN vs QNAN" + * + * For QEMU, the multiply-add operation is A * B + C. + */ + +/* + * We set the Float3NaNPropRule enum values up so we can select the + * right value in pickNaNMulAdd in a data driven way. + */ +FIELD(3NAN, 1ST, 0, 2) /* which operand is most preferred ? */ +FIELD(3NAN, 2ND, 2, 2) /* which operand is next most preferred ? */ +FIELD(3NAN, 3RD, 4, 2) /* which operand is least preferred ? */ +FIELD(3NAN, SNAN, 6, 1) /* do we prefer SNaN over QNaN ? */ + +#define PROPRULE(X, Y, Z) \ + ((X << R_3NAN_1ST_SHIFT) | (Y << R_3NAN_2ND_SHIFT) | (Z << R_3NAN_3RD_SHIFT)) + +typedef enum __attribute__((__packed__)) { + float_3nan_prop_none = 0, /* No propagation rule specified */ + float_3nan_prop_abc = PROPRULE(0, 1, 2), + float_3nan_prop_acb = PROPRULE(0, 2, 1), + float_3nan_prop_bac = PROPRULE(1, 0, 2), + float_3nan_prop_bca = PROPRULE(1, 2, 0), + float_3nan_prop_cab = PROPRULE(2, 0, 1), + float_3nan_prop_cba = PROPRULE(2, 1, 0), + float_3nan_prop_s_abc = float_3nan_prop_abc | R_3NAN_SNAN_MASK, + float_3nan_prop_s_acb = float_3nan_prop_acb | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bac = float_3nan_prop_bac | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bca = float_3nan_prop_bca | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cab = float_3nan_prop_cab | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cba = float_3nan_prop_cba | R_3NAN_SNAN_MASK, +} Float3NaNPropRule; + +#undef PROPRULE + /* * Rule for result of fused multiply-add 0 * Inf + NaN. * This must be a NaN, but implementations differ on whether this @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + Float3NaNPropRule float_3nan_prop_rule; FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, bool have_snan, float_status *status) { + FloatClass cls[3] = { a_cls, b_cls, c_cls }; + Float3NaNPropRule rule = status->float_3nan_prop_rule; + int which; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } + if (rule == float_3nan_prop_none) { #if defined(TARGET_ARM) - - /* This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. - */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + /* + * This looks different from the ARM ARM pseudocode, because the ARM ARM + * puts the operands to a fused mac operation (a*b)+c in the order c,a,b + */ + rule = float_3nan_prop_s_cab; #elif defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* Prefer sNaN over qNaN, in the a, b, c order. */ - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; + if (snan_bit_is_one(status)) { + rule = float_3nan_prop_s_abc; } else { - return 2; + rule = float_3nan_prop_s_cab; } - } else { - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - } #elif defined(TARGET_LOONGARCH64) - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(c_cls)) { - return 2; - } else { - return 1; - } + /* + * If fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + */ + rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) - /* Prefer SNaN over QNaN, order C, B, A. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } + rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) - /* - * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns - * an input NaN if we have one (ie c). - */ - if (status->use_first_nan) { - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; + if (status->use_first_nan) { + rule = float_3nan_prop_abc; } else { - return 2; + rule = float_3nan_prop_cba; } - } else { - if (is_nan(c_cls)) { - return 2; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - } #else - /* A default implementation: prefer a to b to c. - * This is unlikely to actually match any real implementation. - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_abc; #endif + } + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } + return which; } /*---------------------------------------------------------------------------- -- 2.34.1 Explicitly set a rule in the softfloat tests for propagating NaNs in the muladd case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_3nan_prop_s_cab. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-17-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test.c | 1 + 2 files changed, 2 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-18-peter.maydell@linaro.org --- target/arm/cpu.c | 5 +++++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 3-input NaN propagation prefers SNaN over QNaN, and then + * operand C over A over B (see FPProcessNaNs3() pseudocode, + * but note that for QEMU muladd is a * b + c, whereas for + * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling */ @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_ARM) - /* - * This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b - */ - rule = float_3nan_prop_s_cab; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { rule = float_3nan_prop_s_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for loongarch, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-19-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) * case sets InvalidOp and returns the input value 'c' */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_LOONGARCH64) - rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) /* * If fRA is a NaN return it; otherwise if fRB is a NaN return it; -- 2.34.1 Set the Float3NaNPropRule explicitly for PPC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-20-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 6 ------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * NaN propagation for fused multiply-add: + * if fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + * whereas QEMU labels the operands as (a * b) + c. + */ + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->vec_status); /* * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer * to return an input NaN if we have one (ie c) rather than generating diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_PPC) - /* - * If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) -- 2.34.1 Set the Float3NaNPropRule explicitly for s390x, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-21-peter.maydell@linaro.org --- target/s390x/cpu.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); /* fall through */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_S390X) - rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) -- 2.34.1 Set the Float3NaNPropRule explicitly for SPARC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-22-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For fused-multiply add, prefer SNaN over QNaN, then C->B->A */ + set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_SPARC) - rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-23-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 4 ++++ target/mips/msa.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); FloatInfZeroNaNRule izn_rule; + Float3NaNPropRule nan3_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); + nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; + set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->active_tc.msa_fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, + &env->active_tc.msa_fp_status); + /* clear float_status exception flags */ set_float_exception_flags(0, &env->active_tc.msa_fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - rule = float_3nan_prop_s_abc; - } else { - rule = float_3nan_prop_s_cab; - } -#elif defined(TARGET_XTENSA) +#if defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for xtensa, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-24-peter.maydell@linaro.org --- target/xtensa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 8 -------- 2 files changed, 2 insertions(+), 8 deletions(-) diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); + set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, + &env->fp_status); } void HELPER(wur_fpu2k_fcr)(CPUXtensaState *env, uint32_t v) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_XTENSA) - if (status->use_first_nan) { - rule = float_3nan_prop_abc; - } else { - rule = float_3nan_prop_cba; - } -#else rule = float_3nan_prop_abc; -#endif } assert(rule != float_3nan_prop_none); -- 2.34.1 Set the Float3NaNPropRule explicitly for i386. We had no i386-specific behaviour in the old ifdef ladder, so we were using the default "prefer a then b then c" fallback; this is actually the correct per-the-spec handling for i386. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-25-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) * there are multiple input NaNs they are selected in the order a, b, c. */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) -- 2.34.1 Set the Float3NaNPropRule explicitly for HPPA, and remove the ifdef from pickNaNMulAdd(). HPPA is the only target that was using the default branch of the ifdef ladder (other targets either do not use muladd or set default_nan_mode), so we can remove the ifdef fallback entirely now (allowing the "rule not set" case to fall into the default of the switch statement and assert). We add a TODO note that the HPPA rule is probably wrong; this is not a behavioural change for this refactoring. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-26-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 4 ---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * TODO: The HPPA architecture reference only documents its NaN + * propagation rule for 2-operand operations. Testing on real hardware + * might be necessary to confirm whether this order for muladd is correct. + * Not preferring the SNaN is almost certainly incorrect as it diverges + * from the documented rules for 2-operand operations. + */ + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } - if (rule == float_3nan_prop_none) { - rule = float_3nan_prop_abc; - } - assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ -- 2.34.1 The use_first_nan field in float_status was an xtensa-specific way to select at runtime from two different NaN propagation rules. Now that xtensa is using the target-agnostic NaN propagation rule selection that we've just added, we can remove use_first_nan, because there is no longer any code that reads it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-27-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 5 ----- include/fpu/softfloat-types.h | 1 - target/xtensa/fpu_helper.c | 1 - 3 files changed, 7 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_snan_bit_is_one(bool val, float_status *status) status->snan_bit_is_one = val; } -static inline void set_use_first_nan(bool val, float_status *status) -{ - status->use_first_nan = val; -} - static inline void set_no_signaling_nans(bool val, float_status *status) { status->no_signaling_nans = val; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { * softfloat-specialize.inc.c) */ bool snan_bit_is_one; - bool use_first_nan; bool no_signaling_nans; /* should overflowed results subtract re_bias to its exponent? */ bool rebias_overflow; diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ static const struct { void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) { - set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, -- 2.34.1 Currently m68k_cpu_reset_hold() calls floatx80_default_nan(NULL) to get the NaN bit pattern to reset the FPU registers. This works because it happens that our implementation of floatx80_default_nan() doesn't actually look at the float_status pointer except for TARGET_MIPS. However, this isn't guaranteed, and to be able to remove the ifdef in floatx80_default_nan() we're going to need a real float_status here. Rearrange m68k_cpu_reset_hold() so that we initialize env->fp_status earlier, and thus can pass it to floatx80_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-28-peter.maydell@linaro.org --- target/m68k/cpu.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) CPUState *cs = CPU(obj); M68kCPUClass *mcc = M68K_CPU_GET_CLASS(obj); CPUM68KState *env = cpu_env(cs); - floatx80 nan = floatx80_default_nan(NULL); + floatx80 nan; int i; if (mcc->parent_phases.hold) { @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) #else cpu_m68k_set_sr(env, SR_S | SR_I); #endif - for (i = 0; i < 8; i++) { - env->fregs[i].d = nan; - } - cpu_m68k_set_fpcr(env, 0); /* * M68000 FAMILY PROGRAMMER'S REFERENCE MANUAL * 3.4 FLOATING-POINT INSTRUCTION DETAILS @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + + nan = floatx80_default_nan(&env->fp_status); + for (i = 0; i < 8; i++) { + env->fregs[i].d = nan; + } + cpu_m68k_set_fpcr(env, 0); env->fpsr = 0; /* TODO: We should set PC from the interrupt vector. */ -- 2.34.1 We create our 128-bit default NaN by calling parts64_default_nan() and then adjusting the result. We can do the same trick for creating the floatx80 default NaN, which lets us drop a target ifdef. floatx80 is used only by: i386 m68k arm nwfpe old floating-point emulation emulation support (which is essentially dead, especially the parts involving floatx80) PPC (only in the xsrqpxp instruction, which just rounds an input value by converting to floatx80 and back, so will never generate the default NaN) The floatx80 default NaN as currently implemented is: m68k: sign = 0, exp = 1...1, int = 1, frac = 1....1 i386: sign = 1, exp = 1...1, int = 1, frac = 10...0 These are the same as the parts64_default_nan for these architectures. This is technically a possible behaviour change for arm linux-user nwfpe emulation emulation, because the default NaN will now have the sign bit clear. But we were already generating a different floatx80 default NaN from the real kernel emulation we are supposedly following, which appears to use an all-bits-1 value: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L267 This won't affect the only "real" use of the nwfpe emulation, which is ancient binaries that used it as part of the old floating point calling convention; that only uses loads and stores of 32 and 64 bit floats, not any of the floatx80 behaviour the original hardware had. We also get the nwfpe float64 default NaN value wrong: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L166 so if we ever cared about this obscure corner the right fix would be to correct that so nwfpe used its own default-NaN setting rather than the Arm VFP one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-29-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts128_silence_nan(FloatParts128 *p, float_status *status) floatx80 floatx80_default_nan(float_status *status) { floatx80 r; + /* + * Extrapolate from the choices made by parts64_default_nan to fill + * in the floatx80 format. We assume that floatx80's explicit + * integer bit is always set (this is true for i386 and m68k, + * which are the only real users of this format). + */ + FloatParts64 p64; + parts64_default_nan(&p64, status); - /* None of the targets that have snan_bit_is_one use floatx80. */ - assert(!snan_bit_is_one(status)); -#if defined(TARGET_M68K) - r.low = UINT64_C(0xFFFFFFFFFFFFFFFF); - r.high = 0x7FFF; -#else - /* X86 */ - r.low = UINT64_C(0xC000000000000000); - r.high = 0xFFFF; -#endif + r.high = 0x7FFF | (p64.sign << 15); + r.low = (1ULL << DECOMPOSED_BINARY_POINT) | p64.frac; return r; } -- 2.34.1 In target/loongarch's helper_fclass_s() and helper_fclass_d() we pass a zero-initialized float_status struct to float32_is_quiet_nan() and float64_is_quiet_nan(), with the cryptic comment "for snan_bit_is_one". This pattern appears to have been copied from target/riscv, where it is used because the functions there do not have ready access to the CPU state struct. The comment presumably refers to the fact that the main reason the is_quiet_nan() functions want the float_state is because they want to know about the snan_bit_is_one config. In the loongarch helpers, though, we have the CPU state struct to hand. Use the usual env->fp_status here. This avoids our needing to track that we need to update the initializer of the local float_status structs when the core softfloat code adds new options for targets to configure their behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-30-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_s(CPULoongArchState *env, uint64_t fj) } else if (float32_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float32_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float32_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float32_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_d(CPULoongArchState *env, uint64_t fj) } else if (float64_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float64_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float64_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float64_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } -- 2.34.1 In the frem helper, we have a local float_status because we want to execute the floatx80_div() with a custom rounding mode. Instead of zero-initializing the local float_status and then having to set it up with the m68k standard behaviour (including the NaN propagation rule and copying the rounding precision from env->fp_status), initialize it as a complete copy of env->fp_status. This will avoid our having to add new code in this function for every new config knob we add to fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-31-peter.maydell@linaro.org --- target/m68k/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/m68k/fpu_helper.c b/target/m68k/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/fpu_helper.c +++ b/target/m68k/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(frem)(CPUM68KState *env, FPReg *res, FPReg *val0, FPReg *val1) fp_rem = floatx80_rem(val1->d, val0->d, &env->fp_status); if (!floatx80_is_any_nan(fp_rem)) { - float_status fp_status = { }; + /* Use local temporary fp_status to set different rounding mode */ + float_status fp_status = env->fp_status; uint32_t quotient; int sign; /* Calculate quotient directly using round to nearest mode */ - set_float_2nan_prop_rule(float_2nan_prop_ab, &fp_status); set_float_rounding_mode(float_round_nearest_even, &fp_status); - set_floatx80_rounding_precision( - get_floatx80_rounding_precision(&env->fp_status), &fp_status); fp_quot.d = floatx80_div(val1->d, val0->d, &fp_status); sign = extractFloatx80Sign(fp_quot.d); -- 2.34.1 In cf_fpu_gdb_get_reg() and cf_fpu_gdb_set_reg() we do the conversion from float64 to floatx80 using a scratch float_status, because we don't want the conversion to affect the CPU's floating point exception status. Currently we use a zero-initialized float_status. This will get steadily more awkward as we add config knobs to float_status that the target must initialize. Avoid having to add any of that configuration here by instead initializing our local float_status from the env->fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-32-peter.maydell@linaro.org --- target/m68k/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/m68k/helper.c b/target/m68k/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/helper.c +++ b/target/m68k/helper.c @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_get_reg(CPUState *cs, GByteArray *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; return gdb_get_reg64(mem_buf, floatx80_to_float64(env->fregs[n].d, &s)); } switch (n) { @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_set_reg(CPUState *cs, uint8_t *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; env->fregs[n].d = float64_to_floatx80(ldq_be_p(mem_buf), &s); return 8; } -- 2.34.1 In the helper functions flcmps and flcmpd we use a scratch float_status so that we don't change the CPU state if the comparison raises any floating point exception flags. Instead of zero-initializing this scratch float_status, initialize it as a copy of env->fp_status. This avoids the need to explicitly initialize settings like the NaN propagation rule or others we might add to softfloat in future. To do this we need to pass the CPU env pointer in to the helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-33-peter.maydell@linaro.org --- target/sparc/helper.h | 4 ++-- target/sparc/fop_helper.c | 8 ++++---- target/sparc/translate.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/target/sparc/helper.h b/target/sparc/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/helper.h +++ b/target/sparc/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(fcmpd, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmped, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmpq, TCG_CALL_NO_WG, i32, env, i128, i128) DEF_HELPER_FLAGS_3(fcmpeq, TCG_CALL_NO_WG, i32, env, i128, i128) -DEF_HELPER_FLAGS_2(flcmps, TCG_CALL_NO_RWG_SE, i32, f32, f32) -DEF_HELPER_FLAGS_2(flcmpd, TCG_CALL_NO_RWG_SE, i32, f64, f64) +DEF_HELPER_FLAGS_3(flcmps, TCG_CALL_NO_RWG_SE, i32, env, f32, f32) +DEF_HELPER_FLAGS_3(flcmpd, TCG_CALL_NO_RWG_SE, i32, env, f64, f64) DEF_HELPER_2(raise_exception, noreturn, env, int) DEF_HELPER_FLAGS_3(faddd, TCG_CALL_NO_WG, f64, env, f64, f64) diff --git a/target/sparc/fop_helper.c b/target/sparc/fop_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/fop_helper.c +++ b/target/sparc/fop_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t helper_fcmpeq(CPUSPARCState *env, Int128 src1, Int128 src2) return finish_fcmp(env, r, GETPC()); } -uint32_t helper_flcmps(float32 src1, float32 src2) +uint32_t helper_flcmps(CPUSPARCState *env, float32 src1, float32 src2) { /* * FLCMP never raises an exception nor modifies any FSR fields. * Perform the comparison with a dummy fp environment. */ - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); @@ -XXX,XX +XXX,XX @@ uint32_t helper_flcmps(float32 src1, float32 src2) g_assert_not_reached(); } -uint32_t helper_flcmpd(float64 src1, float64 src2) +uint32_t helper_flcmpd(CPUSPARCState *env, float64 src1, float64 src2) { - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); diff --git a/target/sparc/translate.c b/target/sparc/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/translate.c +++ b/target/sparc/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPs(DisasContext *dc, arg_FLCMPs *a) src1 = gen_load_fpr_F(dc, a->rs1); src2 = gen_load_fpr_F(dc, a->rs2); - gen_helper_flcmps(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmps(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPd(DisasContext *dc, arg_FLCMPd *a) src1 = gen_load_fpr_D(dc, a->rs1); src2 = gen_load_fpr_D(dc, a->rs2); - gen_helper_flcmpd(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmpd(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } -- 2.34.1 In the helper_compute_fprf functions, we pass a dummy float_status in to the is_signaling_nan() function. This is unnecessary, because we have convenient access to the CPU env pointer here and that is already set up with the correct values for the snan_bit_is_one and no_signaling_nans config settings. is_signaling_nan() doesn't ever update the fp_status with any exception flags, so there is no reason not to use env->fp_status here. Use env->fp_status instead of the dummy fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-34-peter.maydell@linaro.org --- target/ppc/fpu_helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/ppc/fpu_helper.c b/target/ppc/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/fpu_helper.c +++ b/target/ppc/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void helper_compute_fprf_##tp(CPUPPCState *env, tp arg) \ } else if (tp##_is_infinity(arg)) { \ fprf = neg ? 0x09 << FPSCR_FPRF : 0x05 << FPSCR_FPRF; \ } else { \ - float_status dummy = { }; /* snan_bit_is_one = 0 */ \ - if (tp##_is_signaling_nan(arg, &dummy)) { \ + if (tp##_is_signaling_nan(arg, &env->fp_status)) { \ fprf = 0x00 << FPSCR_FPRF; \ } else { \ fprf = 0x11 << FPSCR_FPRF; \ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Now that float_status has a bunch of fp parameters, it is easier to copy an existing structure than create one from scratch. Begin by copying the structure that corresponds to the FPSR and make only the adjustments required for BFloat16 semantics. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/vec_helper.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vec_helper.c +++ b/target/arm/tcg/vec_helper.c @@ -XXX,XX +XXX,XX @@ bool is_ebf(CPUARMState *env, float_status *statusp, float_status *oddstatusp) * no effect on AArch32 instructions. */ bool ebf = is_a64(env) && env->vfp.fpcr & FPCR_EBF; - *statusp = (float_status){ - .tininess_before_rounding = float_tininess_before_rounding, - .float_rounding_mode = float_round_to_odd_inf, - .flush_to_zero = true, - .flush_inputs_to_zero = true, - .default_nan_mode = true, - }; + + *statusp = env->vfp.fp_status; + set_default_nan_mode(true, statusp); if (ebf) { - float_status *fpst = &env->vfp.fp_status; - set_flush_to_zero(get_flush_to_zero(fpst), statusp); - set_flush_inputs_to_zero(get_flush_inputs_to_zero(fpst), statusp); - set_float_rounding_mode(get_float_rounding_mode(fpst), statusp); - /* EBF=1 needs to do a step with round-to-odd semantics */ *oddstatusp = *statusp; set_float_rounding_mode(float_round_to_odd, oddstatusp); + } else { + set_flush_to_zero(true, statusp); + set_flush_inputs_to_zero(true, statusp); + set_float_rounding_mode(float_round_to_odd_inf, statusp); } - return ebf; } -- 2.34.1 Currently we hardcode the default NaN value in parts64_default_nan() using a compile-time ifdef ladder. This is awkward for two cases: * for single-QEMU-binary we can't hard-code target-specifics like this * for Arm FEAT_AFP the default NaN value depends on FPCR.AH (specifically the sign bit is different) Add a field to float_status to specify the default NaN value; fall back to the old ifdef behaviour if these are not set. The default NaN value is specified by setting a uint8_t to a pattern corresponding to the sign and upper fraction parts of the NaN; the lower bits of the fraction are set from bit 0 of the pattern. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-35-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++++++ include/fpu/softfloat-types.h | 10 ++++++ fpu/softfloat-specialize.c.inc | 55 ++++++++++++++++++++------------- 3 files changed, 54 insertions(+), 22 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, status->float_infzeronan_rule = rule; } +static inline void set_float_default_nan_pattern(uint8_t dnan_pattern, + float_status *status) +{ + status->default_nan_pattern = dnan_pattern; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status return status->float_infzeronan_rule; } +static inline uint8_t get_float_default_nan_pattern(float_status *status) +{ + return status->default_nan_pattern; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { /* should denormalised inputs go to zero and set the input_denormal flag? */ bool flush_inputs_to_zero; bool default_nan_mode; + /* + * The pattern to use for the default NaN. Here the high bit specifies + * the default NaN's sign bit, and bits 6..0 specify the high bits of the + * fractional part. The low bits of the fractional part are copies of bit 0. + * The exponent of the default NaN is (as for any NaN) always all 1s. + * Note that a value of 0 here is not a valid NaN. The target must set + * this to the correct non-zero value, or we will assert when trying to + * create a default NaN. + */ + uint8_t default_nan_pattern; /* * The flags below are not used on all specializations and may * constant fold away (see snan_bit_is_one()/no_signalling_nans() in diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) { bool sign = 0; uint64_t frac; + uint8_t dnan_pattern = status->default_nan_pattern; + if (dnan_pattern == 0) { #if defined(TARGET_SPARC) || defined(TARGET_M68K) - /* !snan_bit_is_one, set all bits */ - frac = (1ULL << DECOMPOSED_BINARY_POINT) - 1; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ + /* Sign bit clear, all frac bits set */ + dnan_pattern = 0b01111111; +#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ || defined(TARGET_MICROBLAZE) - /* !snan_bit_is_one, set sign and msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - sign = 1; + /* Sign bit set, most significant frac bit set */ + dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) - /* snan_bit_is_one, set msb-1. */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 2); + /* Sign bit clear, msb-1 frac bit set */ + dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) - sign = 1; - frac = ~0ULL; + /* Sign bit set, all frac bits set. */ + dnan_pattern = 0b11111111; #else - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* set all bits other than msb */ - frac = (1ULL << (DECOMPOSED_BINARY_POINT - 1)) - 1; - } else { - /* set msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - } + /* + * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, + * S390, SH4, TriCore, and Xtensa. Our other supported targets + * do not have floating-point. + */ + if (snan_bit_is_one(status)) { + /* sign bit clear, set all frac bits other than msb */ + dnan_pattern = 0b00111111; + } else { + /* sign bit clear, set frac msb */ + dnan_pattern = 0b01000000; + } #endif + } + assert(dnan_pattern != 0); + + sign = dnan_pattern >> 7; + /* + * Place default_nan_pattern [6:0] into bits [62:56], + * and replecate bit [0] down into [55:0] + */ + frac = deposit64(0, DECOMPOSED_BINARY_POINT - 7, 7, dnan_pattern); + frac = deposit64(frac, 0, DECOMPOSED_BINARY_POINT - 7, -(dnan_pattern & 1)); *p = (FloatParts64) { .cls = float_class_qnan, -- 2.34.1 Set the default NaN pattern explicitly for the tests/fp code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-36-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 1 + 3 files changed, 3 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); + set_float_default_nan_pattern(0b01000000, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test-log2.c b/tests/fp/fp-test-log2.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test-log2.c +++ b/tests/fp/fp-test-log2.c @@ -XXX,XX +XXX,XX @@ int main(int ac, char **av) int i; set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_rounding_mode(float_round_nearest_even, &qsf); test.d = 0.0; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-37-peter.maydell@linaro.org --- target/microblaze/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/microblaze/cpu.c +++ b/target/microblaze/cpu.c @@ -XXX,XX +XXX,XX @@ static void mb_cpu_reset_hold(Object *obj, ResetType type) * this architecture. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) /* start in user mode with interrupts enabled. */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ - || defined(TARGET_MICROBLAZE) +#elif defined(TARGET_I386) || defined(TARGET_X86_64) /* Sign bit set, most significant frac bit set */ dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-38-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 4 ++++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); + set_float_default_nan_pattern(0b11000000, &env->mmx_status); + set_float_default_nan_pattern(0b11000000, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) - /* Sign bit set, most significant frac bit set */ - dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) /* Sign bit clear, msb-1 frac bit set */ dnan_pattern = 0b00100000; -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-39-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN: sign bit clear, msb-1 frac bit set */ + set_float_default_nan_pattern(0b00100000, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_HPPA) - /* Sign bit clear, msb-1 frac bit set */ - dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; -- 2.34.1 Set the default NaN pattern explicitly for the alpha target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-40-peter.maydell@linaro.org --- target/alpha/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/alpha/cpu.c b/target/alpha/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/alpha/cpu.c +++ b/target/alpha/cpu.c @@ -XXX,XX +XXX,XX @@ static void alpha_cpu_initfn(Object *obj) * operand in Fa. That is float_2nan_prop_ba. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) env->flags = ENV_FLAG_PS_USER | ENV_FLAG_FEN; cpu_alpha_store_fpcr(env, (uint64_t)(FPCR_INVD | FPCR_DZED | FPCR_OVFD -- 2.34.1 Set the default NaN pattern explicitly for the arm target. This includes setting it for the old linux-user nwfpe emulation. For nwfpe, our default doesn't match the real kernel, but we avoid making a behaviour change in this commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-41-peter.maydell@linaro.org --- linux-user/arm/nwfpe/fpa11.c | 5 +++++ target/arm/cpu.c | 2 ++ 2 files changed, 7 insertions(+) diff --git a/linux-user/arm/nwfpe/fpa11.c b/linux-user/arm/nwfpe/fpa11.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/nwfpe/fpa11.c +++ b/linux-user/arm/nwfpe/fpa11.c @@ -XXX,XX +XXX,XX @@ void resetFPA11(void) * this late date. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &fpa11->fp_status); + /* + * Use the same default NaN value as Arm VFP. This doesn't match + * the Linux kernel's nwfpe emulation, which uses an all-1s value. + */ + set_float_default_nan_pattern(0b01000000, &fpa11->fp_status); } void SetRoundingMode(const unsigned int opcode) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling + * * Default NaN has sign bit clear, msb frac bit set */ static void arm_set_default_fp_behaviours(float_status *s) { @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); + set_float_default_nan_pattern(0b01000000, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) -- 2.34.1 Set the default NaN pattern explicitly for loongarch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-42-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) -- 2.34.1 Set the default NaN pattern explicitly for m68k. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-43-peter.maydell@linaro.org --- target/m68k/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + /* Default NaN: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); nan = floatx80_default_nan(&env->fp_status); for (i = 0; i < 8; i++) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) || defined(TARGET_M68K) +#if defined(TARGET_SPARC) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; #elif defined(TARGET_HEXAGON) -- 2.34.1 Set the default NaN pattern explicitly for MIPS. Note that this is our only target which currently changes the default NaN at runtime (which it was previously doing indirectly when it changed the snan_bit_is_one setting). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-44-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 7 +++++++ target/mips/msa.c | 3 +++ 2 files changed, 10 insertions(+) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + /* + * With nan2008, the default NaN value has the sign bit clear and the + * frac msb set; with the older mode, the sign bit is clear, and all + * frac bits except the msb are set. + */ + set_float_default_nan_pattern(nan2008 ? 0b01000000 : 0b00111111, + &env->active_fpu.fp_status); } diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* Inf * 0 + NaN returns the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->active_tc.msa_fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, + &env->active_tc.msa_fp_status); } -- 2.34.1 Set the default NaN pattern explicitly for openrisc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-45-peter.maydell@linaro.org --- target/openrisc/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &cpu->env.fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &cpu->env.fp_status); #ifndef CONFIG_USER_ONLY cpu->env.picmr = 0x00000000; -- 2.34.1 Set the default NaN pattern explicitly for ppc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-46-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); + /* Default NaN: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); + set_float_default_nan_pattern(0b01000000, &env->vec_status); + for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; -- 2.34.1 Set the default NaN pattern explicitly for sh4. Note that sh4 is one of the only three targets (the others being HPPA and sometimes MIPS) that has snan_bit_is_one set. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-47-peter.maydell@linaro.org --- target/sh4/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sh4/cpu.c +++ b/target/sh4/cpu.c @@ -XXX,XX +XXX,XX @@ static void superh_cpu_reset_hold(Object *obj, ResetType type) set_flush_to_zero(1, &env->fp_status); #endif set_default_nan_mode(1, &env->fp_status); + /* sign bit clear, set all frac bits other than msb */ + set_float_default_nan_pattern(0b00111111, &env->fp_status); } static void superh_cpu_disas_set_info(CPUState *cpu, disassemble_info *info) -- 2.34.1 Set the default NaN pattern explicitly for rx. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-48-peter.maydell@linaro.org --- target/rx/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/rx/cpu.c b/target/rx/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.c +++ b/target/rx/cpu.c @@ -XXX,XX +XXX,XX @@ static void rx_cpu_reset_hold(Object *obj, ResetType type) * then prefer dest over source", which is float_2nan_prop_s_ab. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } static ObjectClass *rx_cpu_class_by_name(const char *cpu_model) -- 2.34.1 Set the default NaN pattern explicitly for s390x. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-49-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; -- 2.34.1 Set the default NaN pattern explicitly for SPARC, and remove the ifdef from parts64_default_nan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-50-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 +---- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN value: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) - /* Sign bit clear, all frac bits set */ - dnan_pattern = 0b01111111; -#elif defined(TARGET_HEXAGON) +#if defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; #else -- 2.34.1 Set the default NaN pattern explicitly for xtensa. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-51-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } -- 2.34.1 Set the default NaN pattern explicitly for hexagon. Remove the ifdef from parts64_default_nan(); the only remaining unconverted targets all use the default case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-52-peter.maydell@linaro.org --- target/hexagon/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 ----- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/target/hexagon/cpu.c b/target/hexagon/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.c +++ b/target/hexagon/cpu.c @@ -XXX,XX +XXX,XX @@ static void hexagon_cpu_reset_hold(Object *obj, ResetType type) set_default_nan_mode(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); + /* Default NaN value: sign bit set, all frac bits set */ + set_float_default_nan_pattern(0b11111111, &env->fp_status); } static void hexagon_cpu_disas_set_info(CPUState *s, disassemble_info *info) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_HEXAGON) - /* Sign bit set, all frac bits set. */ - dnan_pattern = 0b11111111; -#else /* * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, * S390, SH4, TriCore, and Xtensa. Our other supported targets @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) /* sign bit clear, set frac msb */ dnan_pattern = 0b01000000; } -#endif } assert(dnan_pattern != 0); -- 2.34.1 Set the default NaN pattern explicitly for riscv. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-53-peter.maydell@linaro.org --- target/riscv/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) cs->exception_index = RISCV_EXCP_NONE; env->load_res = -1; set_default_nan_mode(1, &env->fp_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); env->vill = true; #ifndef CONFIG_USER_ONLY -- 2.34.1 Set the default NaN pattern explicitly for tricore. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-54-peter.maydell@linaro.org --- target/tricore/helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/tricore/helper.c b/target/tricore/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/tricore/helper.c +++ b/target/tricore/helper.c @@ -XXX,XX +XXX,XX @@ void fpu_set_state(CPUTriCoreState *env) set_flush_to_zero(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); set_default_nan_mode(1, &env->fp_status); + /* Default NaN pattern: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } uint32_t psw_read(CPUTriCoreState *env) -- 2.34.1 Now that all our targets have bene converted to explicitly specify their pattern for the default NaN value we can remove the remaining fallback code in parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-55-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint64_t frac; uint8_t dnan_pattern = status->default_nan_pattern; - if (dnan_pattern == 0) { - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* sign bit clear, set all frac bits other than msb */ - dnan_pattern = 0b00111111; - } else { - /* sign bit clear, set frac msb */ - dnan_pattern = 0b01000000; - } - } assert(dnan_pattern != 0); sign = dnan_pattern >> 7; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaNMulAdd into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-3-richard.henderson@linaro.org [PMM: keep comment from old code in new location] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 41 +++++++++++++++++++++++++- fpu/softfloat-specialize.c.inc | 54 ---------------------------------- 2 files changed, 40 insertions(+), 55 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } if (s->default_nan_mode) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ which = 3; + } else if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the + * default NaN here, and some return the input NaN. + */ + switch (s->float_infzeronan_rule) { + case float_infzeronan_dnan_never: + which = 2; + break; + case float_infzeronan_dnan_always: + which = 3; + break; + case float_infzeronan_dnan_if_qnan: + which = is_qnan(c->cls) ? 3 : 2; + break; + default: + g_assert_not_reached(); + } } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); + FloatClass cls[3] = { a->cls, b->cls, c->cls }; + Float3NaNPropRule rule = s->float_3nan_prop_rule; + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a three-input operation. -| For the moment we assume that no CPU needs the 'larger significand' -| information. -| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN -*----------------------------------------------------------------------------*/ -static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, bool have_snan, float_status *status) -{ - FloatClass cls[3] = { a_cls, b_cls, c_cls }; - Float3NaNPropRule rule = status->float_3nan_prop_rule; - int which; - - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify. - */ - assert(!status->default_nan_mode); - - if (infzero) { - /* - * Inf * 0 + NaN -- some implementations return the default NaN here, - * and some return the input NaN. - */ - switch (status->float_infzeronan_rule) { - case float_infzeronan_dnan_never: - return 2; - case float_infzeronan_dnan_always: - return 3; - case float_infzeronan_dnan_if_qnan: - return is_qnan(c_cls) ? 3 : 2; - default: - g_assert_not_reached(); - } - } - - assert(rule != float_3nan_prop_none); - if (have_snan && (rule & R_3NAN_SNAN_MASK)) { - /* We have at least one SNaN input and should prefer it */ - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); - } else { - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); - } - return which; -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remove "3" as a special case for which and simply branch to return the desired value. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, * But if we're not in default-NaN mode then the target must * specify. */ - which = 3; + goto default_nan; } else if (infzero) { /* * Inf * 0 + NaN -- some implementations return the @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, */ switch (s->float_infzeronan_rule) { case float_infzeronan_dnan_never: - which = 2; break; case float_infzeronan_dnan_always: - which = 3; - break; + goto default_nan; case float_infzeronan_dnan_if_qnan: - which = is_qnan(c->cls) ? 3 : 2; + if (is_qnan(c->cls)) { + goto default_nan; + } break; default: g_assert_not_reached(); } + which = 2; } else { FloatClass cls[3] = { a->cls, b->cls, c->cls }; Float3NaNPropRule rule = s->float_3nan_prop_rule; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } } - if (which == 3) { - parts_default_nan(a, s); - return a; - } - switch (which) { case 0: break; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, parts_silence_nan(a, s); } return a; + + default_nan: + parts_default_nan(a, s); + return a; } /* -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Assign the pointer return value to 'a' directly, rather than going through an intermediary index. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, FloatPartsN *c, float_status *s, int ab_mask, int abc_mask) { - int which; bool infzero = (ab_mask == float_cmask_infzero); bool have_snan = (abc_mask & float_cmask_snan); + FloatPartsN *ret; if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, default: g_assert_not_reached(); } - which = 2; + ret = c; } else { - FloatClass cls[3] = { a->cls, b->cls, c->cls }; + FloatPartsN *val[3] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); + } while (!is_snan(ret->cls)); } else { do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); + } while (!is_nan(ret->cls)); } } - switch (which) { - case 0: - break; - case 1: - a = b; - break; - case 2: - a = c; - break; - default: - g_assert_not_reached(); + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; default_nan: parts_default_nan(a, s); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> While all indices into val[] should be in [0-2], the mask applied is two bits. To help static analysis see there is no possibility of read beyond the end of the array, pad the array to 4 entries, with the final being (implicitly) NULL. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } ret = c; } else { - FloatPartsN *val[3] = { a, b, c }; + FloatPartsN *val[R_3NAN_1ST_MASK + 1] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This function is part of the public interface and is not "specialized" to any target in any way. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 52 ++++++++++++++++++++++++++++++++++ fpu/softfloat-specialize.c.inc | 52 ---------------------------------- 2 files changed, 52 insertions(+), 52 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, *zExpPtr = 1 - shiftCount; } +/*---------------------------------------------------------------------------- +| Takes two extended double-precision floating-point values `a' and `b', one +| of which is a NaN, and returns the appropriate NaN result. If either `a' or +| `b' is a signaling NaN, the invalid exception is raised. +*----------------------------------------------------------------------------*/ + +floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) +{ + bool aIsLargerSignificand; + FloatClass a_cls, b_cls; + + /* This is not complete, but is good enough for pickNaN. */ + a_cls = (!floatx80_is_any_nan(a) + ? float_class_normal + : floatx80_is_signaling_nan(a, status) + ? float_class_snan + : float_class_qnan); + b_cls = (!floatx80_is_any_nan(b) + ? float_class_normal + : floatx80_is_signaling_nan(b, status) + ? float_class_snan + : float_class_qnan); + + if (is_snan(a_cls) || is_snan(b_cls)) { + float_raise(float_flag_invalid, status); + } + + if (status->default_nan_mode) { + return floatx80_default_nan(status); + } + + if (a.low < b.low) { + aIsLargerSignificand = 0; + } else if (b.low < a.low) { + aIsLargerSignificand = 1; + } else { + aIsLargerSignificand = (a.high < b.high) ? 1 : 0; + } + + if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { + if (is_snan(b_cls)) { + return floatx80_silence_nan(b, status); + } + return b; + } else { + if (is_snan(a_cls)) { + return floatx80_silence_nan(a, status); + } + return a; + } +} + /*---------------------------------------------------------------------------- | Takes an abstract floating-point value having sign `zSign', exponent `zExp', | and extended significand formed by the concatenation of `zSig0' and `zSig1', diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ floatx80 floatx80_silence_nan(floatx80 a, float_status *status) return a; } -/*---------------------------------------------------------------------------- -| Takes two extended double-precision floating-point values `a' and `b', one -| of which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) -{ - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; - - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { - return floatx80_default_nan(status); - } - - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the quadruple-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Unpacking and repacking the parts may be slightly more work than we did before, but we get to reuse more code. For a code path handling exceptional values, this is an improvement. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241203203949.483774-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 43 +++++-------------------------------------- 1 file changed, 5 insertions(+), 38 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) { - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; + FloatParts128 pa, pb, *pr; - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { + if (!floatx80_unpack_canonical(&pa, a, status) || + !floatx80_unpack_canonical(&pb, b, status)) { return floatx80_default_nan(status); } - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } + pr = parts_pick_nan(&pa, &pb, status); + return floatx80_round_pack_canonical(pr, status); } /*---------------------------------------------------------------------------- -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaN into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 82 +++++++++++++++++++++++++---- fpu/softfloat-specialize.c.inc | 96 ---------------------------------- 2 files changed, 73 insertions(+), 105 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + int cmp, which; + if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } if (s->default_nan_mode) { parts_default_nan(a, s); - } else { - int cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } + return a; + } - if (pickNaN(a->cls, b->cls, cmp > 0, s)) { - a = b; - } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + + switch (s->float_2nan_prop_rule) { + case float_2nan_prop_s_ab: if (is_snan(a->cls)) { - parts_silence_nan(a, s); + which = 0; + } else if (is_snan(b->cls)) { + which = 1; + } else if (is_qnan(a->cls)) { + which = 0; + } else { + which = 1; } + break; + case float_2nan_prop_s_ba: + if (is_snan(b->cls)) { + which = 1; + } else if (is_snan(a->cls)) { + which = 0; + } else if (is_qnan(b->cls)) { + which = 1; + } else { + which = 0; + } + break; + case float_2nan_prop_ab: + which = is_nan(a->cls) ? 0 : 1; + break; + case float_2nan_prop_ba: + which = is_nan(b->cls) ? 1 : 0; + break; + case float_2nan_prop_x87: + /* + * This implements x87 NaN propagation rules: + * SNaN + QNaN => return the QNaN + * two SNaNs => return the one with the larger significand, silenced + * two QNaNs => return the one with the larger significand + * SNaN and a non-NaN => return the SNaN, silenced + * QNaN and a non-NaN => return the QNaN + * + * If we get down to comparing significands and they are the same, + * return the NaN with the positive sign bit (if any). + */ + if (is_snan(a->cls)) { + if (is_snan(b->cls)) { + which = cmp > 0 ? 0 : 1; + } else { + which = is_qnan(b->cls) ? 1 : 0; + } + } else if (is_qnan(a->cls)) { + if (is_snan(b->cls) || !is_qnan(b->cls)) { + which = 0; + } else { + which = cmp > 0 ? 0 : 1; + } + } else { + which = 1; + } + break; + default: + g_assert_not_reached(); + } + + if (which) { + a = b; + } + if (is_snan(a->cls)) { + parts_silence_nan(a, s); } return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ bool float32_is_signaling_nan(float32 a_, float_status *status) } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a two-input operation. -| IEEE754 doesn't specify all the details of this, so the -| algorithm is target-specific. -| The routine is passed various bits of information about the -| two NaNs and should return 0 to select NaN a and 1 for NaN b. -| Note that signalling NaNs are always squashed to quiet NaNs -| by the caller, by calling floatXX_silence_nan() before -| returning them. -| -| aIsLargerSignificand is only valid if both a and b are NaNs -| of some kind, and is true if a has the larger significand, -| or if both a and b have the same significand but a is -| positive but b is negative. It is only needed for the x87 -| tie-break rule. -*----------------------------------------------------------------------------*/ - -static int pickNaN(FloatClass a_cls, FloatClass b_cls, - bool aIsLargerSignificand, float_status *status) -{ - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify via set_float_2nan_prop_rule(). - */ - assert(!status->default_nan_mode); - - switch (status->float_2nan_prop_rule) { - case float_2nan_prop_s_ab: - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_s_ba: - if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_ab: - if (is_nan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_ba: - if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_x87: - /* - * This implements x87 NaN propagation rules: - * SNaN + QNaN => return the QNaN - * two SNaNs => return the one with the larger significand, silenced - * two QNaNs => return the one with the larger significand - * SNaN and a non-NaN => return the SNaN, silenced - * QNaN and a non-NaN => return the QNaN - * - * If we get down to comparing significands and they are the same, - * return the NaN with the positive sign bit (if any). - */ - if (is_snan(a_cls)) { - if (is_snan(b_cls)) { - return aIsLargerSignificand ? 0 : 1; - } - return is_qnan(b_cls) ? 1 : 0; - } else if (is_qnan(a_cls)) { - if (is_snan(b_cls) || !is_qnan(b_cls)) { - return 0; - } else { - return aIsLargerSignificand ? 0 : 1; - } - } else { - return 1; - } - default: - g_assert_not_reached(); - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remember if there was an SNaN, and use that to simplify float_2nan_prop_s_{ab,ba} to only the snan component. Then, fall through to the corresponding float_2nan_prop_{ab,ba} case to handle any remaining nans, which must be quiet. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + bool have_snan = false; int cmp, which; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); + have_snan = true; } if (s->default_nan_mode) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: - if (is_snan(a->cls)) { - which = 0; - } else if (is_snan(b->cls)) { - which = 1; - } else if (is_qnan(a->cls)) { - which = 0; - } else { - which = 1; + if (have_snan) { + which = is_snan(a->cls) ? 0 : 1; + break; } - break; - case float_2nan_prop_s_ba: - if (is_snan(b->cls)) { - which = 1; - } else if (is_snan(a->cls)) { - which = 0; - } else if (is_qnan(b->cls)) { - which = 1; - } else { - which = 0; - } - break; + /* fall through */ case float_2nan_prop_ab: which = is_nan(a->cls) ? 0 : 1; break; + case float_2nan_prop_s_ba: + if (have_snan) { + which = is_snan(b->cls) ? 1 : 0; + break; + } + /* fall through */ case float_2nan_prop_ba: which = is_nan(b->cls) ? 1 : 0; break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Move the fractional comparison to the end of the float_2nan_prop_x87 case. This is not required for any other 2nan propagation rule. Reorganize the x87 case itself to break out of the switch when the fractional comparison is not required. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, return a; } - cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } - switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, * return the NaN with the positive sign bit (if any). */ if (is_snan(a->cls)) { - if (is_snan(b->cls)) { - which = cmp > 0 ? 0 : 1; - } else { + if (!is_snan(b->cls)) { which = is_qnan(b->cls) ? 1 : 0; + break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { which = 0; - } else { - which = cmp > 0 ? 0 : 1; + break; } } else { which = 1; + break; } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + which = cmp > 0 ? 0 : 1; break; default: g_assert_not_reached(); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Replace the "index" selecting between A and B with a result variable of the proper type. This improves clarity within the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { bool have_snan = false; - int cmp, which; + FloatPartsN *ret; + int cmp; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { - which = is_snan(a->cls) ? 0 : 1; + ret = is_snan(a->cls) ? a : b; break; } /* fall through */ case float_2nan_prop_ab: - which = is_nan(a->cls) ? 0 : 1; + ret = is_nan(a->cls) ? a : b; break; case float_2nan_prop_s_ba: if (have_snan) { - which = is_snan(b->cls) ? 1 : 0; + ret = is_snan(b->cls) ? b : a; break; } /* fall through */ case float_2nan_prop_ba: - which = is_nan(b->cls) ? 1 : 0; + ret = is_nan(b->cls) ? b : a; break; case float_2nan_prop_x87: /* @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, */ if (is_snan(a->cls)) { if (!is_snan(b->cls)) { - which = is_qnan(b->cls) ? 1 : 0; + ret = is_qnan(b->cls) ? b : a; break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { - which = 0; + ret = a; break; } } else { - which = 1; + ret = b; break; } cmp = frac_cmp(a, b); if (cmp == 0) { cmp = a->sign < b->sign; } - which = cmp > 0 ? 0 : 1; + ret = cmp > 0 ? a : b; break; default: g_assert_not_reached(); } - if (which) { - a = b; + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; } static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> I'm migrating to Qualcomm's new open source email infrastructure, so update my email address, and update the mailmap to match. Signed-off-by: Leif Lindholm <leif.lindholm@oss.qualcomm.com> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Brian Cain <brian.cain@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241205114047.1125842-1-leif.lindholm@oss.qualcomm.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- .mailmap | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <quic_llindhol@quicinc.com> +R: Leif Lindholm <leif.lindholm@oss.qualcomm.com> R: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> L: qemu-arm@nongnu.org S: Maintained diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> Juan Quintela <quintela@trasno.org> <quintela@redhat.com> -Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> -Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <quic_llindhol@quicinc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif.lindholm@linaro.org> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif@nuviainc.com> Luc Michel <luc@lmichel.fr> <luc.michel@git.antfield.fr> Luc Michel <luc@lmichel.fr> <luc.michel@greensocs.com> Luc Michel <luc@lmichel.fr> <lmichel@kalray.eu> -- 2.34.1 From: Vikram Garhwal <vikram.garhwal@bytedance.com> Previously, maintainer role was paused due to inactive email id. Commit id: c009d715721861984c4987bcc78b7ee183e86d75. Signed-off-by: Vikram Garhwal <vikram.garhwal@bytedance.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20241204184205.12952-1-vikram.garhwal@bytedance.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: tests/qtest/fuzz-sb16-test.c Xilinx CAN M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained F: hw/net/can/xlnx-* F: include/hw/net/xlnx-* @@ -XXX,XX +XXX,XX @@ F: include/hw/rx/ CAN bus subsystem and hardware M: Pavel Pisa <pisa@cmp.felk.cvut.cz> M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained W: https://canbus.pages.fel.cvut.cz/ F: net/can/* -- 2.34.1