The following changes since commit 3db29dcac23da85486704ef9e7a8e7217f7829cd: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-01-12 13:51:36 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230113 for you to fetch changes up to 08899b5c68a55a3780d707e2464073c8f2670d31: target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled (2023-01-13 13:19:36 +0000) ---------------------------------------------------------------- target-arm queue: hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 board cubieboard: Support booting from an SD card image with u-boot on it target/arm: Fix sve_probe_page target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled various code cleanups ---------------------------------------------------------------- Evgeny Iakovlev (1): target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled Felipe Balbi (2): hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 Philippe Mathieu-Daudé (27): hw/arm/pxa2xx: Simplify pxa255_init() hw/arm/pxa2xx: Simplify pxa270_init() hw/arm/collie: Use the IEC binary prefix definitions hw/arm/collie: Simplify flash creation using for() loop hw/arm/gumstix: Improve documentation hw/arm/gumstix: Use the IEC binary prefix definitions hw/arm/mainstone: Use the IEC binary prefix definitions hw/arm/musicpal: Use the IEC binary prefix definitions hw/arm/omap_sx1: Remove unused 'total_ram' definitions hw/arm/omap_sx1: Use the IEC binary prefix definitions hw/arm/z2: Use the IEC binary prefix definitions hw/arm/vexpress: Remove dead code in vexpress_common_init() hw/arm: Remove unreachable code calling pflash_cfi01_register() hw/arm/pxa: Avoid forward-declaring PXA2xxI2CState hw/gpio/omap_gpio: Add local variable to avoid embedded cast hw/arm/omap: Drop useless casts from void * to pointer hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP1_GPIO type name hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP2_GPIO type name hw/intc/omap_intc: Use CamelCase for TYPE_OMAP_INTC type name hw/arm/stellaris: Drop useless casts from void * to pointer hw/arm/stellaris: Use CamelCase for STELLARIS_ADC type name hw/arm/bcm2836: Remove definitions generated by OBJECT_DECLARE_TYPE() hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/misc/sbsa_ec: Rename TYPE_SBSA_EC -> TYPE_SBSA_SECURE_EC hw/misc/sbsa_ec: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/intc/xilinx_intc: Use 'XpsIntc' typedef instead of 'struct xlx_pic' hw/timer/xilinx_timer: Use XpsTimerState instead of 'struct timerblock' Richard Henderson (1): target/arm: Fix sve_probe_page Strahinja Jankovic (7): hw/misc: Allwinner-A10 Clock Controller Module Emulation hw/misc: Allwinner A10 DRAM Controller Emulation {hw/i2c,docs/system/arm}: Allwinner TWI/I2C Emulation hw/misc: AXP209 PMU Emulation hw/arm: Add AXP209 to Cubieboard hw/arm: Allwinner A10 enable SPL load from MMC tests/avocado: Add SD boot test to Cubieboard docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + include/hw/adc/npcm7xx_adc.h | 7 +- include/hw/arm/allwinner-a10.h | 27 ++ include/hw/arm/allwinner-h3.h | 3 + include/hw/arm/npcm7xx.h | 18 +- include/hw/arm/omap.h | 24 +- include/hw/arm/pxa.h | 11 +- include/hw/arm/stm32f405_soc.h | 5 +- include/hw/i2c/allwinner-i2c.h | 55 ++++ include/hw/i2c/npcm7xx_smbus.h | 7 +- include/hw/misc/allwinner-a10-ccm.h | 67 +++++ include/hw/misc/allwinner-a10-dramc.h | 68 +++++ include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +- include/hw/misc/npcm7xx_mft.h | 7 +- include/hw/misc/npcm7xx_pwm.h | 3 +- include/hw/misc/npcm7xx_rng.h | 6 +- include/hw/net/npcm7xx_emc.h | 5 +- include/hw/sd/npcm7xx_sdhci.h | 4 +- hw/arm/allwinner-a10.c | 40 +++ hw/arm/allwinner-h3.c | 11 +- hw/arm/bcm2836.c | 9 +- hw/arm/collie.c | 25 +- hw/arm/cubieboard.c | 11 + hw/arm/gumstix.c | 45 ++-- hw/arm/mainstone.c | 37 ++- hw/arm/musicpal.c | 9 +- hw/arm/olimex-stm32-h405.c | 69 +++++ hw/arm/omap1.c | 115 ++++---- hw/arm/omap2.c | 40 ++- hw/arm/omap_sx1.c | 53 ++-- hw/arm/palm.c | 2 +- hw/arm/pxa2xx.c | 8 +- hw/arm/spitz.c | 6 +- hw/arm/stellaris.c | 73 +++-- hw/arm/stm32f405_soc.c | 8 + hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 6 +- hw/arm/vexpress.c | 10 +- hw/arm/z2.c | 16 +- hw/char/omap_uart.c | 7 +- hw/display/omap_dss.c | 15 +- hw/display/omap_lcdc.c | 9 +- hw/dma/omap_dma.c | 15 +- hw/gpio/omap_gpio.c | 48 ++-- hw/i2c/allwinner-i2c.c | 459 ++++++++++++++++++++++++++++++++ hw/intc/omap_intc.c | 38 +-- hw/intc/xilinx_intc.c | 28 +- hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++ hw/misc/allwinner-a10-dramc.c | 179 +++++++++++++ hw/misc/axp209.c | 238 +++++++++++++++++ hw/misc/omap_gpmc.c | 12 +- hw/misc/omap_l4.c | 7 +- hw/misc/omap_sdrc.c | 7 +- hw/misc/omap_tap.c | 5 +- hw/misc/sbsa_ec.c | 12 +- hw/sd/omap_mmc.c | 9 +- hw/ssi/omap_spi.c | 7 +- hw/timer/omap_gptimer.c | 22 +- hw/timer/omap_synctimer.c | 4 +- hw/timer/xilinx_timer.c | 27 +- target/arm/helper.c | 3 + target/arm/sve_helper.c | 14 +- MAINTAINERS | 8 + hw/arm/Kconfig | 9 + hw/arm/meson.build | 1 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + hw/misc/Kconfig | 10 + hw/misc/meson.build | 3 + hw/misc/trace-events | 5 + tests/avocado/boot_linux_console.py | 47 ++++ 76 files changed, 1951 insertions(+), 455 deletions(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/arm/olimex-stm32-h405.c create mode 100644 hw/i2c/allwinner-i2c.c create mode 100644 hw/misc/allwinner-a10-ccm.c create mode 100644 hw/misc/allwinner-a10-dramc.c create mode 100644 hw/misc/axp209.c From: Felipe Balbi <balbi@kernel.org> STM32F405 has 128K of SRAM and another 64K of CCM (Core-coupled Memory) at a different base address. Correctly describe the memory layout to give existing FW images a chance to run unmodified. Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Message-id: 20221230145733.200496-2-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/stm32f405_soc.h | 5 ++++- hw/arm/stm32f405_soc.c | 8 ++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/stm32f405_soc.h b/include/hw/arm/stm32f405_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32f405_soc.h +++ b/include/hw/arm/stm32f405_soc.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(STM32F405State, STM32F405_SOC) #define FLASH_BASE_ADDRESS 0x08000000 #define FLASH_SIZE (1024 * 1024) #define SRAM_BASE_ADDRESS 0x20000000 -#define SRAM_SIZE (192 * 1024) +#define SRAM_SIZE (128 * 1024) +#define CCM_BASE_ADDRESS 0x10000000 +#define CCM_SIZE (64 * 1024) struct STM32F405State { /*< private >*/ @@ -XXX,XX +XXX,XX @@ struct STM32F405State { STM32F2XXADCState adc[STM_NUM_ADCS]; STM32F2XXSPIState spi[STM_NUM_SPIS]; + MemoryRegion ccm; MemoryRegion sram; MemoryRegion flash; MemoryRegion flash_alias; diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f405_soc_realize(DeviceState *dev_soc, Error **errp) } memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, &s->sram); + memory_region_init_ram(&s->ccm, NULL, "STM32F405.ccm", CCM_SIZE, + &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(system_memory, CCM_BASE_ADDRESS, &s->ccm); + armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 96); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); -- 2.34.1 From: Felipe Balbi <balbi@kernel.org> Olimex makes a series of low-cost STM32 boards. This commit introduces the minimum setup to support SMT32-H405. See [1] for details [1] https://www.olimex.com/Products/ARM/ST/STM32-H405/ Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20221230145733.200496-3-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + hw/arm/olimex-stm32-h405.c | 69 +++++++++++++++++++++++++ MAINTAINERS | 6 +++ hw/arm/Kconfig | 4 ++ hw/arm/meson.build | 1 + 6 files changed, 82 insertions(+) create mode 100644 hw/arm/olimex-stm32-h405.c diff --git a/docs/system/arm/stm32.rst b/docs/system/arm/stm32.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/stm32.rst +++ b/docs/system/arm/stm32.rst @@ -XXX,XX +XXX,XX @@ The STM32F4 series is based on ARM Cortex-M4F core. This series is pin-to-pin compatible with STM32F2 series. The following machines are based on this chip : - ``netduinoplus2`` Netduino Plus 2 board with STM32F405RGT6 microcontroller +- ``olimex-stm32-h405`` Olimex STM32 H405 board with STM32F405RGT6 microcontroller There are many other STM32 series that are currently not supported by QEMU. diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_COLLIE=y CONFIG_ASPEED_SOC=y CONFIG_NETDUINO2=y CONFIG_NETDUINOPLUS2=y +CONFIG_OLIMEX_STM32_H405=y CONFIG_MPS2=y CONFIG_RASPI=y CONFIG_DIGIC=y diff --git a/hw/arm/olimex-stm32-h405.c b/hw/arm/olimex-stm32-h405.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/olimex-stm32-h405.c @@ -XXX,XX +XXX,XX @@ +/* + * ST STM32VLDISCOVERY machine + * Olimex STM32-H405 machine + * + * Copyright (c) 2022 Felipe Balbi <balbi@kernel.org> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/boards.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-clock.h" +#include "qemu/error-report.h" +#include "hw/arm/stm32f405_soc.h" +#include "hw/arm/boot.h" + +/* olimex-stm32-h405 implementation is derived from netduinoplus2 */ + +/* Main SYSCLK frequency in Hz (168MHz) */ +#define SYSCLK_FRQ 168000000ULL + +static void olimex_stm32_h405_init(MachineState *machine) +{ + DeviceState *dev; + Clock *sysclk; + + /* This clock doesn't need migration because it is fixed-frequency */ + sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(sysclk, SYSCLK_FRQ); + + dev = qdev_new(TYPE_STM32F405_SOC); + qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m4")); + qdev_connect_clock_in(dev, "sysclk", sysclk); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), + machine->kernel_filename, + 0, FLASH_SIZE); +} + +static void olimex_stm32_h405_machine_init(MachineClass *mc) +{ + mc->desc = "Olimex STM32-H405 (Cortex-M4)"; + mc->init = olimex_stm32_h405_init; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4"); + + /* SRAM pre-allocated as part of the SoC instantiation */ + mc->default_ram_size = 0; +} + +DEFINE_MACHINE("olimex-stm32-h405", olimex_stm32_h405_machine_init) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Maintained F: hw/arm/netduinoplus2.c +Olimex STM32 H405 +M: Felipe Balbi <balbi@kernel.org> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/olimex-stm32-h405.c + SmartFusion2 M: Subbaraya Sundeep <sundeep.lkml@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config NETDUINOPLUS2 bool select STM32F405_SOC +config OLIMEX_STM32_H405 + bool + select STM32F405_SOC + config NSERIES bool select OMAP diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) +arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c')) arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c')) arm_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several Clock Controller Module (CCM) registers are read, most important are PLL and Tuning, as well as divisor registers. This patch adds these registers and initializes reset values from user's guide. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-ccm.h | 67 +++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 305 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 hw/misc/allwinner-a10-ccm.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/misc/allwinner-a10-ccm.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { /*< public >*/ ARMCPU cpu; + AwA10ClockCtlState ccm; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-ccm.h b/include/hw/misc/allwinner-a10-ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_CCM_H +#define HW_MISC_ALLWINNER_A10_CCM_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by CCM device */ +#define AW_A10_CCM_IOSIZE (0x400) + +/** Total number of known registers */ +#define AW_A10_CCM_REGS_NUM (AW_A10_CCM_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_CCM "allwinner-a10-ccm" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10ClockCtlState, AW_A10_CCM) + +/** @} */ + +/** + * Allwinner A10 CCM object instance state. + */ +struct AwA10ClockCtlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_CCM_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_H3_CCU_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #define AW_A10_MMC0_BASE 0x01c0f000 +#define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 #define AW_A10_PIT_REG_BASE 0x01c20c00 #define AW_A10_UART0_REG_BASE 0x01c28000 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "timer", &s->timer, TYPE_AW_A10_PIT); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a); create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB); + /* Clock Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-ccm.c b/hw/misc/allwinner-a10-ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-ccm.h" + +/* CCM register offsets */ +enum { + REG_PLL1_CFG = 0x0000, /* PLL1 Control */ + REG_PLL1_TUN = 0x0004, /* PLL1 Tuning */ + REG_PLL2_CFG = 0x0008, /* PLL2 Control */ + REG_PLL2_TUN = 0x000C, /* PLL2 Tuning */ + REG_PLL3_CFG = 0x0010, /* PLL3 Control */ + REG_PLL4_CFG = 0x0018, /* PLL4 Control */ + REG_PLL5_CFG = 0x0020, /* PLL5 Control */ + REG_PLL5_TUN = 0x0024, /* PLL5 Tuning */ + REG_PLL6_CFG = 0x0028, /* PLL6 Control */ + REG_PLL6_TUN = 0x002C, /* PLL6 Tuning */ + REG_PLL7_CFG = 0x0030, /* PLL7 Control */ + REG_PLL1_TUN2 = 0x0038, /* PLL1 Tuning2 */ + REG_PLL5_TUN2 = 0x003C, /* PLL5 Tuning2 */ + REG_PLL8_CFG = 0x0040, /* PLL8 Control */ + REG_OSC24M_CFG = 0x0050, /* OSC24M Control */ + REG_CPU_AHB_APB0_CFG = 0x0054, /* CPU, AHB and APB0 Divide Ratio */ +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* CCM register reset values */ +enum { + REG_PLL1_CFG_RST = 0x21005000, + REG_PLL1_TUN_RST = 0x0A101000, + REG_PLL2_CFG_RST = 0x08100010, + REG_PLL2_TUN_RST = 0x00000000, + REG_PLL3_CFG_RST = 0x0010D063, + REG_PLL4_CFG_RST = 0x21009911, + REG_PLL5_CFG_RST = 0x11049280, + REG_PLL5_TUN_RST = 0x14888000, + REG_PLL6_CFG_RST = 0x21009911, + REG_PLL6_TUN_RST = 0x00000000, + REG_PLL7_CFG_RST = 0x0010D063, + REG_PLL1_TUN2_RST = 0x00000000, + REG_PLL5_TUN2_RST = 0x00000000, + REG_PLL8_CFG_RST = 0x21009911, + REG_OSC24M_CFG_RST = 0x00138013, + REG_CPU_AHB_APB0_CFG_RST = 0x00010010, +}; + +static uint64_t allwinner_a10_ccm_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_ccm_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_ccm_ops = { + .read = allwinner_a10_ccm_read, + .write = allwinner_a10_ccm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_ccm_reset_enter(Object *obj, ResetType type) +{ + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_PLL1_CFG)] = REG_PLL1_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN)] = REG_PLL1_TUN_RST; + s->regs[REG_INDEX(REG_PLL2_CFG)] = REG_PLL2_CFG_RST; + s->regs[REG_INDEX(REG_PLL2_TUN)] = REG_PLL2_TUN_RST; + s->regs[REG_INDEX(REG_PLL3_CFG)] = REG_PLL3_CFG_RST; + s->regs[REG_INDEX(REG_PLL4_CFG)] = REG_PLL4_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_CFG)] = REG_PLL5_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_TUN)] = REG_PLL5_TUN_RST; + s->regs[REG_INDEX(REG_PLL6_CFG)] = REG_PLL6_CFG_RST; + s->regs[REG_INDEX(REG_PLL6_TUN)] = REG_PLL6_TUN_RST; + s->regs[REG_INDEX(REG_PLL7_CFG)] = REG_PLL7_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN2)] = REG_PLL1_TUN2_RST; + s->regs[REG_INDEX(REG_PLL5_TUN2)] = REG_PLL5_TUN2_RST; + s->regs[REG_INDEX(REG_PLL8_CFG)] = REG_PLL8_CFG_RST; + s->regs[REG_INDEX(REG_OSC24M_CFG)] = REG_OSC24M_CFG_RST; + s->regs[REG_INDEX(REG_CPU_AHB_APB0_CFG)] = REG_CPU_AHB_APB0_CFG_RST; +} + +static void allwinner_a10_ccm_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_ccm_ops, s, + TYPE_AW_A10_CCM, AW_A10_CCM_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_ccm_vmstate = { + .name = "allwinner-a10-ccm", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10ClockCtlState, AW_A10_CCM_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_ccm_reset_enter; + dc->vmsd = &allwinner_a10_ccm_vmstate; +} + +static const TypeInfo allwinner_a10_ccm_info = { + .name = TYPE_AW_A10_CCM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_ccm_init, + .instance_size = sizeof(AwA10ClockCtlState), + .class_init = allwinner_a10_ccm_class_init, +}; + +static void allwinner_a10_ccm_register(void) +{ + type_register_static(&allwinner_a10_ccm_info); +} + +type_init(allwinner_a10_ccm_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select AHCI select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC + select ALLWINNER_A10_CCM select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config VIRT_CTRL config LASI bool +config ALLWINNER_A10_CCM + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several DRAM Controller registers are used. Most important registers are those related to DRAM initialization and calibration, where SPL initiates process and waits until certain bit is set/cleared. This patch adds these registers, initializes reset values from user's guide and updates state of registers as SPL expects it. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-dramc.h | 68 ++++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-dramc.c | 179 ++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 261 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/misc/allwinner-a10-dramc.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" +#include "hw/misc/allwinner-a10-dramc.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { ARMCPU cpu; AwA10ClockCtlState ccm; + AwA10DramControllerState dramc; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-dramc.h b/include/hw/misc/allwinner-a10-dramc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-dramc.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_DRAMC_H +#define HW_MISC_ALLWINNER_A10_DRAMC_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "hw/register.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by DRAMC device */ +#define AW_A10_DRAMC_IOSIZE (0x1000) + +/** Total number of known registers */ +#define AW_A10_DRAMC_REGS_NUM (AW_A10_DRAMC_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_DRAMC "allwinner-a10-dramc" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10DramControllerState, AW_A10_DRAMC) + +/** @} */ + +/** + * Allwinner A10 DRAMC object instance state. + */ +struct AwA10DramControllerState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_DRAMC_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_A10_DRAMC_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "dramc", &s->dramc, TYPE_AW_A10_DRAMC); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* DRAM Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->dramc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 0, AW_A10_DRAMC_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-dramc.c b/hw/misc/allwinner-a10-dramc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-dramc.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-dramc.h" + +/* DRAMC register offsets */ +enum { + REG_SDR_CCR = 0x0000, + REG_SDR_ZQCR0 = 0x00a8, + REG_SDR_ZQSR = 0x00b0 +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* DRAMC register flags */ +enum { + REG_SDR_CCR_DATA_TRAINING = (1 << 30), + REG_SDR_CCR_DRAM_INIT = (1 << 31), +}; +enum { + REG_SDR_ZQSR_ZCAL = (1 << 31), +}; + +/* DRAMC register reset values */ +enum { + REG_SDR_CCR_RESET = 0x80020000, + REG_SDR_ZQCR0_RESET = 0x07b00000, + REG_SDR_ZQSR_RESET = 0x80000000 +}; + +static uint64_t allwinner_a10_dramc_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + case REG_SDR_ZQCR0: + case REG_SDR_ZQSR: + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_dramc_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + if (val & REG_SDR_CCR_DRAM_INIT) { + /* Clear DRAM_INIT to indicate process is done. */ + val &= ~REG_SDR_CCR_DRAM_INIT; + } + if (val & REG_SDR_CCR_DATA_TRAINING) { + /* Clear DATA_TRAINING to indicate process is done. */ + val &= ~REG_SDR_CCR_DATA_TRAINING; + } + break; + case REG_SDR_ZQCR0: + /* Set ZCAL in ZQSR to indicate calibration is done. */ + s->regs[REG_INDEX(REG_SDR_ZQSR)] |= REG_SDR_ZQSR_ZCAL; + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_dramc_ops = { + .read = allwinner_a10_dramc_read, + .write = allwinner_a10_dramc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_dramc_reset_enter(Object *obj, ResetType type) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_SDR_CCR)] = REG_SDR_CCR_RESET; + s->regs[REG_INDEX(REG_SDR_ZQCR0)] = REG_SDR_ZQCR0_RESET; + s->regs[REG_INDEX(REG_SDR_ZQSR)] = REG_SDR_ZQSR_RESET; +} + +static void allwinner_a10_dramc_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_dramc_ops, s, + TYPE_AW_A10_DRAMC, AW_A10_DRAMC_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_dramc_vmstate = { + .name = "allwinner-a10-dramc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10DramControllerState, + AW_A10_DRAMC_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_dramc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_dramc_reset_enter; + dc->vmsd = &allwinner_a10_dramc_vmstate; +} + +static const TypeInfo allwinner_a10_dramc_info = { + .name = TYPE_AW_A10_DRAMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_dramc_init, + .instance_size = sizeof(AwA10DramControllerState), + .class_init = allwinner_a10_dramc_class_init, +}; + +static void allwinner_a10_dramc_register(void) +{ + type_register_static(&allwinner_a10_dramc_info); +} + +type_init(allwinner_a10_dramc_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC select ALLWINNER_A10_CCM + select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config LASI config ALLWINNER_A10_CCM bool +config ALLWINNER_A10_DRAMC + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_DRAMC', if_true: files('allwinner-a10-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch implements Allwinner TWI/I2C controller emulation. Only master-mode functionality is implemented. The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is first part enabling the TWI/I2C bus operation. Since both Allwinner A10 and H3 use the same module, it is added for both boards. Docs are also updated for Cubieboard and Orangepi-PC board to indicate I2C availability. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + include/hw/arm/allwinner-a10.h | 2 + include/hw/arm/allwinner-h3.h | 3 + include/hw/i2c/allwinner-i2c.h | 55 ++++ hw/arm/allwinner-a10.c | 8 + hw/arm/allwinner-h3.c | 11 +- hw/i2c/allwinner-i2c.c | 459 +++++++++++++++++++++++++++++++++ hw/arm/Kconfig | 2 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + 12 files changed, 551 insertions(+), 1 deletion(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 hw/i2c/allwinner-i2c.c diff --git a/docs/system/arm/cubieboard.rst b/docs/system/arm/cubieboard.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cubieboard.rst +++ b/docs/system/arm/cubieboard.rst @@ -XXX,XX +XXX,XX @@ Emulated devices: - SDHCI - USB controller - SATA controller +- TWI (I2C) controller diff --git a/docs/system/arm/orangepi.rst b/docs/system/arm/orangepi.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/orangepi.rst +++ b/docs/system/arm/orangepi.rst @@ -XXX,XX +XXX,XX @@ The Orange Pi PC machine supports the following devices: * Clock Control Unit * System Control module * Security Identifier device + * TWI (I2C) Limitations """"""""""" diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { AwEmacState emac; AllwinnerAHCIState sata; AwSdHostState mmc0; + AWI2CState i2c0; AwRtcState rtc; MemoryRegion sram_a; EHCISysBusState ehci[AW_A10_NUM_USB]; diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/allwinner-sdhost.h" #include "hw/net/allwinner-sun8i-emac.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "sysemu/block-backend.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_DEV_UART2, AW_H3_DEV_UART3, AW_H3_DEV_EMAC, + AW_H3_DEV_TWI0, AW_H3_DEV_DRAMCOM, AW_H3_DEV_DRAMCTL, AW_H3_DEV_DRAMPHY, @@ -XXX,XX +XXX,XX @@ struct AwH3State { AwH3SysCtrlState sysctrl; AwSidState sid; AwSdHostState mmc0; + AWI2CState i2c0; AwSun8iEmacState emac; AwRtcState rtc; GICState gic; diff --git a/include/hw/i2c/allwinner-i2c.h b/include/hw/i2c/allwinner-i2c.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/allwinner-i2c.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface registers definition + * + * Copyright (C) 2022 Strahinja Jankovic. <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef ALLWINNER_I2C_H +#define ALLWINNER_I2C_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_AW_I2C "allwinner.i2c" +OBJECT_DECLARE_SIMPLE_TYPE(AWI2CState, AW_I2C) + +#define AW_I2C_MEM_SIZE 0x24 + +struct AWI2CState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + I2CBus *bus; + qemu_irq irq; + + uint8_t addr; + uint8_t xaddr; + uint8_t data; + uint8_t cntr; + uint8_t stat; + uint8_t ccr; + uint8_t srst; + uint8_t efr; + uint8_t lcr; +}; + +#endif /* ALLWINNER_I2C_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #define AW_A10_OHCI_BASE 0x01c14400 #define AW_A10_SATA_BASE 0x01c18000 #define AW_A10_RTC_BASE 0x01c20d00 +#define AW_A10_I2C0_BASE 0x01c2ac00 static void aw_a10_init(Object *obj) { @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); + object_initialize_child(obj, "i2c0", &s->i2c0, TYPE_AW_I2C); + if (machine_usb(current_machine)) { int i; @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) /* RTC */ sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->rtc), 0, AW_A10_RTC_BASE, 10); + + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, AW_A10_I2C0_BASE); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, qdev_get_gpio_in(dev, 7)); } static void aw_a10_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_DEV_UART1] = 0x01c28400, [AW_H3_DEV_UART2] = 0x01c28800, [AW_H3_DEV_UART3] = 0x01c28c00, + [AW_H3_DEV_TWI0] = 0x01c2ac00, [AW_H3_DEV_EMAC] = 0x01c30000, [AW_H3_DEV_DRAMCOM] = 0x01c62000, [AW_H3_DEV_DRAMCTL] = 0x01c63000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "uart1", 0x01c28400, 1 * KiB }, { "uart2", 0x01c28800, 1 * KiB }, { "uart3", 0x01c28c00, 1 * KiB }, - { "twi0", 0x01c2ac00, 1 * KiB }, { "twi1", 0x01c2b000, 1 * KiB }, { "twi2", 0x01c2b400, 1 * KiB }, { "scr", 0x01c2c400, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_UART1 = 1, AW_H3_GIC_SPI_UART2 = 2, AW_H3_GIC_SPI_UART3 = 3, + AW_H3_GIC_SPI_TWI0 = 6, AW_H3_GIC_SPI_TIMER0 = 18, AW_H3_GIC_SPI_TIMER1 = 19, AW_H3_GIC_SPI_MMC0 = 60, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) "ram-size"); object_initialize_child(obj, "rtc", &s->rtc, TYPE_AW_RTC_SUN6I); + + object_initialize_child(obj, "twi0", &s->i2c0, TYPE_AW_I2C); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, s->memmap[AW_H3_DEV_RTC]); + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, s->memmap[AW_H3_DEV_TWI0]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TWI0)); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { create_unimplemented_device(unimplemented[i].device_name, diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "hw/i2c/allwinner-i2c.h" +#include "hw/irq.h" +#include "migration/vmstate.h" +#include "hw/i2c/i2c.h" +#include "qemu/log.h" +#include "trace.h" +#include "qemu/module.h" + +/* Allwinner I2C memory map */ +#define TWI_ADDR_REG 0x00 /* slave address register */ +#define TWI_XADDR_REG 0x04 /* extended slave address register */ +#define TWI_DATA_REG 0x08 /* data register */ +#define TWI_CNTR_REG 0x0c /* control register */ +#define TWI_STAT_REG 0x10 /* status register */ +#define TWI_CCR_REG 0x14 /* clock control register */ +#define TWI_SRST_REG 0x18 /* software reset register */ +#define TWI_EFR_REG 0x1c /* enhance feature register */ +#define TWI_LCR_REG 0x20 /* line control register */ + +/* Used only in slave mode, do not set */ +#define TWI_ADDR_RESET 0 +#define TWI_XADDR_RESET 0 + +/* Data register */ +#define TWI_DATA_MASK 0xFF +#define TWI_DATA_RESET 0 + +/* Control register */ +#define TWI_CNTR_INT_EN (1 << 7) +#define TWI_CNTR_BUS_EN (1 << 6) +#define TWI_CNTR_M_STA (1 << 5) +#define TWI_CNTR_M_STP (1 << 4) +#define TWI_CNTR_INT_FLAG (1 << 3) +#define TWI_CNTR_A_ACK (1 << 2) +#define TWI_CNTR_MASK 0xFC +#define TWI_CNTR_RESET 0 + +/* Status register */ +#define TWI_STAT_MASK 0xF8 +#define TWI_STAT_RESET 0xF8 + +/* Clock register */ +#define TWI_CCR_CLK_M_MASK 0x78 +#define TWI_CCR_CLK_N_MASK 0x07 +#define TWI_CCR_MASK 0x7F +#define TWI_CCR_RESET 0 + +/* Soft reset */ +#define TWI_SRST_MASK 0x01 +#define TWI_SRST_RESET 0 + +/* Enhance feature */ +#define TWI_EFR_MASK 0x03 +#define TWI_EFR_RESET 0 + +/* Line control */ +#define TWI_LCR_SCL_STATE (1 << 5) +#define TWI_LCR_SDA_STATE (1 << 4) +#define TWI_LCR_SCL_CTL (1 << 3) +#define TWI_LCR_SCL_CTL_EN (1 << 2) +#define TWI_LCR_SDA_CTL (1 << 1) +#define TWI_LCR_SDA_CTL_EN (1 << 0) +#define TWI_LCR_MASK 0x3F +#define TWI_LCR_RESET 0x3A + +/* Status value in STAT register is shifted by 3 bits */ +#define TWI_STAT_SHIFT 3 +#define STAT_FROM_STA(x) ((x) << TWI_STAT_SHIFT) +#define STAT_TO_STA(x) ((x) >> TWI_STAT_SHIFT) + +enum { + STAT_BUS_ERROR = 0, + /* Master mode */ + STAT_M_STA_TX, + STAT_M_RSTA_TX, + STAT_M_ADDR_WR_ACK, + STAT_M_ADDR_WR_NACK, + STAT_M_DATA_TX_ACK, + STAT_M_DATA_TX_NACK, + STAT_M_ARB_LOST, + STAT_M_ADDR_RD_ACK, + STAT_M_ADDR_RD_NACK, + STAT_M_DATA_RX_ACK, + STAT_M_DATA_RX_NACK, + /* Slave mode */ + STAT_S_ADDR_WR_ACK, + STAT_S_ARB_LOST_AW_ACK, + STAT_S_GCA_ACK, + STAT_S_ARB_LOST_GCA_ACK, + STAT_S_DATA_RX_SA_ACK, + STAT_S_DATA_RX_SA_NACK, + STAT_S_DATA_RX_GCA_ACK, + STAT_S_DATA_RX_GCA_NACK, + STAT_S_STP_RSTA, + STAT_S_ADDR_RD_ACK, + STAT_S_ARB_LOST_AR_ACK, + STAT_S_DATA_TX_ACK, + STAT_S_DATA_TX_NACK, + STAT_S_LB_TX_ACK, + /* Master mode, 10-bit */ + STAT_M_2ND_ADDR_WR_ACK, + STAT_M_2ND_ADDR_WR_NACK, + /* Idle */ + STAT_IDLE = 0x1f +} TWI_STAT_STA; + +static const char *allwinner_i2c_get_regname(unsigned offset) +{ + switch (offset) { + case TWI_ADDR_REG: + return "ADDR"; + case TWI_XADDR_REG: + return "XADDR"; + case TWI_DATA_REG: + return "DATA"; + case TWI_CNTR_REG: + return "CNTR"; + case TWI_STAT_REG: + return "STAT"; + case TWI_CCR_REG: + return "CCR"; + case TWI_SRST_REG: + return "SRST"; + case TWI_EFR_REG: + return "EFR"; + case TWI_LCR_REG: + return "LCR"; + default: + return "[?]"; + } +} + +static inline bool allwinner_i2c_is_reset(AWI2CState *s) +{ + return s->srst & TWI_SRST_MASK; +} + +static inline bool allwinner_i2c_bus_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_BUS_EN; +} + +static inline bool allwinner_i2c_interrupt_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_INT_EN; +} + +static void allwinner_i2c_reset_hold(Object *obj) +{ + AWI2CState *s = AW_I2C(obj); + + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + i2c_end_transfer(s->bus); + } + + s->addr = TWI_ADDR_RESET; + s->xaddr = TWI_XADDR_RESET; + s->data = TWI_DATA_RESET; + s->cntr = TWI_CNTR_RESET; + s->stat = TWI_STAT_RESET; + s->ccr = TWI_CCR_RESET; + s->srst = TWI_SRST_RESET; + s->efr = TWI_EFR_RESET; + s->lcr = TWI_LCR_RESET; +} + +static inline void allwinner_i2c_raise_interrupt(AWI2CState *s) +{ + /* + * Raise an interrupt if the device is not reset and it is configured + * to generate some interrupts. + */ + if (!allwinner_i2c_is_reset(s) && allwinner_i2c_bus_is_enabled(s)) { + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + s->cntr |= TWI_CNTR_INT_FLAG; + if (allwinner_i2c_interrupt_is_enabled(s)) { + qemu_irq_raise(s->irq); + } + } + } +} + +static uint64_t allwinner_i2c_read(void *opaque, hwaddr offset, + unsigned size) +{ + uint16_t value; + AWI2CState *s = AW_I2C(opaque); + + switch (offset) { + case TWI_ADDR_REG: + value = s->addr; + break; + case TWI_XADDR_REG: + value = s->xaddr; + break; + case TWI_DATA_REG: + if ((STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK)) { + /* Get the next byte */ + s->data = i2c_recv(s->bus); + + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + value = s->data; + break; + case TWI_CNTR_REG: + value = s->cntr; + break; + case TWI_STAT_REG: + value = s->stat; + /* + * If polling when reading then change state to indicate data + * is available + */ + if (STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) { + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case TWI_CCR_REG: + value = s->ccr; + break; + case TWI_SRST_REG: + value = s->srst; + break; + case TWI_EFR_REG: + value = s->efr; + break; + case TWI_LCR_REG: + value = s->lcr; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + value = 0; + break; + } + + trace_allwinner_i2c_read(allwinner_i2c_get_regname(offset), offset, value); + + return (uint64_t)value; +} + +static void allwinner_i2c_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AWI2CState *s = AW_I2C(opaque); + + value &= 0xff; + + trace_allwinner_i2c_write(allwinner_i2c_get_regname(offset), offset, value); + + switch (offset) { + case TWI_ADDR_REG: + s->addr = (uint8_t)value; + break; + case TWI_XADDR_REG: + s->xaddr = (uint8_t)value; + break; + case TWI_DATA_REG: + /* If the device is in reset or not enabled, nothing to do */ + if (allwinner_i2c_is_reset(s) || (!allwinner_i2c_bus_is_enabled(s))) { + break; + } + + s->data = value & TWI_DATA_MASK; + + switch (STAT_TO_STA(s->stat)) { + case STAT_M_STA_TX: + case STAT_M_RSTA_TX: + /* Send address */ + if (i2c_start_transfer(s->bus, extract32(s->data, 1, 7), + extract32(s->data, 0, 1))) { + /* If non zero is returned, the address is not valid */ + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_NACK); + } else { + /* Determine if read of write */ + if (extract32(s->data, 0, 1)) { + s->stat = STAT_FROM_STA(STAT_M_ADDR_RD_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_ACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case STAT_M_ADDR_WR_ACK: + case STAT_M_DATA_TX_ACK: + if (i2c_send(s->bus, s->data)) { + /* If the target return non zero then end the transfer */ + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_NACK); + i2c_end_transfer(s->bus); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_ACK); + allwinner_i2c_raise_interrupt(s); + } + break; + default: + break; + } + break; + case TWI_CNTR_REG: + if (!allwinner_i2c_is_reset(s)) { + /* Do something only if not in software reset */ + s->cntr = value & TWI_CNTR_MASK; + + /* Check if start condition should be sent */ + if (s->cntr & TWI_CNTR_M_STA) { + /* Update status */ + if (STAT_TO_STA(s->stat) == STAT_IDLE) { + /* Send start condition */ + s->stat = STAT_FROM_STA(STAT_M_STA_TX); + } else { + /* Send repeated start condition */ + s->stat = STAT_FROM_STA(STAT_M_RSTA_TX); + } + /* Clear start condition */ + s->cntr &= ~TWI_CNTR_M_STA; + } + if (s->cntr & TWI_CNTR_M_STP) { + /* Update status */ + i2c_end_transfer(s->bus); + s->stat = STAT_FROM_STA(STAT_IDLE); + s->cntr &= ~TWI_CNTR_M_STP; + } + if ((s->cntr & TWI_CNTR_INT_FLAG) == 0) { + /* Interrupt flag cleared */ + qemu_irq_lower(s->irq); + } + if ((s->cntr & TWI_CNTR_A_ACK) == 0) { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + } else { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } + } + allwinner_i2c_raise_interrupt(s); + + } + break; + case TWI_CCR_REG: + s->ccr = value & TWI_CCR_MASK; + break; + case TWI_SRST_REG: + if (((value & TWI_SRST_MASK) == 0) && (s->srst & TWI_SRST_MASK)) { + /* Perform reset */ + allwinner_i2c_reset_hold(OBJECT(s)); + } + s->srst = value & TWI_SRST_MASK; + break; + case TWI_EFR_REG: + s->efr = value & TWI_EFR_MASK; + break; + case TWI_LCR_REG: + s->lcr = value & TWI_LCR_MASK; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + break; + } +} + +static const MemoryRegionOps allwinner_i2c_ops = { + .read = allwinner_i2c_read, + .write = allwinner_i2c_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription allwinner_i2c_vmstate = { + .name = TYPE_AW_I2C, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8(addr, AWI2CState), + VMSTATE_UINT8(xaddr, AWI2CState), + VMSTATE_UINT8(data, AWI2CState), + VMSTATE_UINT8(cntr, AWI2CState), + VMSTATE_UINT8(ccr, AWI2CState), + VMSTATE_UINT8(srst, AWI2CState), + VMSTATE_UINT8(efr, AWI2CState), + VMSTATE_UINT8(lcr, AWI2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_i2c_realize(DeviceState *dev, Error **errp) +{ + AWI2CState *s = AW_I2C(dev); + + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_i2c_ops, s, + TYPE_AW_I2C, AW_I2C_MEM_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->bus = i2c_init_bus(dev, "i2c"); +} + +static void allwinner_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = allwinner_i2c_reset_hold; + dc->vmsd = &allwinner_i2c_vmstate; + dc->realize = allwinner_i2c_realize; + dc->desc = "Allwinner I2C Controller"; +} + +static const TypeInfo allwinner_i2c_type_info = { + .name = TYPE_AW_I2C, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AWI2CState), + .class_init = allwinner_i2c_class_init, +}; + +static void allwinner_i2c_register_types(void) +{ + type_register_static(&allwinner_i2c_type_info); +} + +type_init(allwinner_i2c_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_CCM select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC + select ALLWINNER_I2C select SERIAL select UNIMP @@ -XXX,XX +XXX,XX @@ config ALLWINNER_H3 bool select ALLWINNER_A10_PIT select ALLWINNER_SUN8I_EMAC + select ALLWINNER_I2C select SERIAL select ARM_TIMER select ARM_GIC diff --git a/hw/i2c/Kconfig b/hw/i2c/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/Kconfig +++ b/hw/i2c/Kconfig @@ -XXX,XX +XXX,XX @@ config MPC_I2C bool select I2C +config ALLWINNER_I2C + bool + select I2C + config PCA954X bool select I2C diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/meson.build +++ b/hw/i2c/meson.build @@ -XXX,XX +XXX,XX @@ i2c_ss.add(when: 'CONFIG_BITBANG_I2C', if_true: files('bitbang_i2c.c')) i2c_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_i2c.c')) i2c_ss.add(when: 'CONFIG_IMX_I2C', if_true: files('imx_i2c.c')) i2c_ss.add(when: 'CONFIG_MPC_I2C', if_true: files('mpc_i2c.c')) +i2c_ss.add(when: 'CONFIG_ALLWINNER_I2C', if_true: files('allwinner-i2c.c')) i2c_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('microbit_i2c.c')) i2c_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_smbus.c')) i2c_ss.add(when: 'CONFIG_SMBUS_EEPROM', if_true: files('smbus_eeprom.c')) diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ i2c_send_async(uint8_t address, uint8_t data) "send_async(addr:0x%02x) data:0x%0 i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x" i2c_ack(void) "" +# allwinner_i2c.c + +allwinner_i2c_read(const char* reg_name, uint64_t offset, uint64_t value) "read %s [0x%" PRIx64 "]: -> 0x%" PRIx64 +allwinner_i2c_write(const char* reg_name, uint64_t offset, uint64_t value) "write %s [0x%" PRIx64 "]: <- 0x%" PRIx64 + # aspeed_i2c.c aspeed_i2c_bus_cmd(uint32_t cmd, const char *cmd_flags, uint32_t count, uint32_t intr_status) "handling cmd=0x%x %s count=%d intr=0x%x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch adds minimal support for AXP-209 PMU. Most important is chip ID since U-Boot SPL expects version 0x1. Besides the chip ID register, reset values for two more registers used by A10 U-Boot SPL are covered. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Message-id: 20221226220303.14420-5-strahinja.p.jankovic@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/axp209.c | 238 +++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 2 + hw/misc/Kconfig | 4 + hw/misc/meson.build | 1 + hw/misc/trace-events | 5 + 5 files changed, 250 insertions(+) create mode 100644 hw/misc/axp209.c diff --git a/hw/misc/axp209.c b/hw/misc/axp209.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/axp209.c @@ -XXX,XX +XXX,XX @@ +/* + * AXP-209 PMU Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "trace.h" +#include "hw/i2c/i2c.h" +#include "migration/vmstate.h" + +#define TYPE_AXP209_PMU "axp209_pmu" + +#define AXP209(obj) \ + OBJECT_CHECK(AXP209I2CState, (obj), TYPE_AXP209_PMU) + +/* registers */ +enum { + REG_POWER_STATUS = 0x0u, + REG_OPERATING_MODE, + REG_OTG_VBUS_STATUS, + REG_CHIP_VERSION, + REG_DATA_CACHE_0, + REG_DATA_CACHE_1, + REG_DATA_CACHE_2, + REG_DATA_CACHE_3, + REG_DATA_CACHE_4, + REG_DATA_CACHE_5, + REG_DATA_CACHE_6, + REG_DATA_CACHE_7, + REG_DATA_CACHE_8, + REG_DATA_CACHE_9, + REG_DATA_CACHE_A, + REG_DATA_CACHE_B, + REG_POWER_OUTPUT_CTRL = 0x12u, + REG_DC_DC2_OUT_V_CTRL = 0x23u, + REG_DC_DC2_DVS_CTRL = 0x25u, + REG_DC_DC3_OUT_V_CTRL = 0x27u, + REG_LDO2_4_OUT_V_CTRL, + REG_LDO3_OUT_V_CTRL, + REG_VBUS_CH_MGMT = 0x30u, + REG_SHUTDOWN_V_CTRL, + REG_SHUTDOWN_CTRL, + REG_CHARGE_CTRL_1, + REG_CHARGE_CTRL_2, + REG_SPARE_CHARGE_CTRL, + REG_PEK_KEY_CTRL, + REG_DC_DC_FREQ_SET, + REG_CHR_TEMP_TH_SET, + REG_CHR_HIGH_TEMP_TH_CTRL, + REG_IPSOUT_WARN_L1, + REG_IPSOUT_WARN_L2, + REG_DISCHR_TEMP_TH_SET, + REG_DISCHR_HIGH_TEMP_TH_CTRL, + REG_IRQ_BANK_1_CTRL = 0x40u, + REG_IRQ_BANK_2_CTRL, + REG_IRQ_BANK_3_CTRL, + REG_IRQ_BANK_4_CTRL, + REG_IRQ_BANK_5_CTRL, + REG_IRQ_BANK_1_STAT = 0x48u, + REG_IRQ_BANK_2_STAT, + REG_IRQ_BANK_3_STAT, + REG_IRQ_BANK_4_STAT, + REG_IRQ_BANK_5_STAT, + REG_ADC_ACIN_V_H = 0x56u, + REG_ADC_ACIN_V_L, + REG_ADC_ACIN_CURR_H, + REG_ADC_ACIN_CURR_L, + REG_ADC_VBUS_V_H, + REG_ADC_VBUS_V_L, + REG_ADC_VBUS_CURR_H, + REG_ADC_VBUS_CURR_L, + REG_ADC_INT_TEMP_H, + REG_ADC_INT_TEMP_L, + REG_ADC_TEMP_SENS_V_H = 0x62u, + REG_ADC_TEMP_SENS_V_L, + REG_ADC_BAT_V_H = 0x78u, + REG_ADC_BAT_V_L, + REG_ADC_BAT_DISCHR_CURR_H, + REG_ADC_BAT_DISCHR_CURR_L, + REG_ADC_BAT_CHR_CURR_H, + REG_ADC_BAT_CHR_CURR_L, + REG_ADC_IPSOUT_V_H, + REG_ADC_IPSOUT_V_L, + REG_DC_DC_MOD_SEL = 0x80u, + REG_ADC_EN_1, + REG_ADC_EN_2, + REG_ADC_SR_CTRL, + REG_ADC_IN_RANGE, + REG_GPIO1_ADC_IRQ_RISING_TH, + REG_GPIO1_ADC_IRQ_FALLING_TH, + REG_TIMER_CTRL = 0x8au, + REG_VBUS_CTRL_MON_SRP, + REG_OVER_TEMP_SHUTDOWN = 0x8fu, + REG_GPIO0_FEAT_SET, + REG_GPIO_OUT_HIGH_SET, + REG_GPIO1_FEAT_SET, + REG_GPIO2_FEAT_SET, + REG_GPIO_SIG_STATE_SET_MON, + REG_GPIO3_SET, + REG_COULOMB_CNTR_CTRL = 0xb8u, + REG_POWER_MEAS_RES, + NR_REGS +}; + +#define AXP209_CHIP_VERSION_ID (0x01) +#define AXP209_DC_DC2_OUT_V_CTRL_RESET (0x16) +#define AXP209_IRQ_BANK_1_CTRL_RESET (0xd8) + +/* A simple I2C slave which returns values of ID or CNT register. */ +typedef struct AXP209I2CState { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + uint8_t regs[NR_REGS]; /* peripheral registers */ + uint8_t ptr; /* current register index */ + uint8_t count; /* counter used for tx/rx */ +} AXP209I2CState; + +/* Reset all counters and load ID register */ +static void axp209_reset_enter(Object *obj, ResetType type) +{ + AXP209I2CState *s = AXP209(obj); + + memset(s->regs, 0, NR_REGS); + s->ptr = 0; + s->count = 0; + s->regs[REG_CHIP_VERSION] = AXP209_CHIP_VERSION_ID; + s->regs[REG_DC_DC2_OUT_V_CTRL] = AXP209_DC_DC2_OUT_V_CTRL_RESET; + s->regs[REG_IRQ_BANK_1_CTRL] = AXP209_IRQ_BANK_1_CTRL_RESET; +} + +/* Handle events from master. */ +static int axp209_event(I2CSlave *i2c, enum i2c_event event) +{ + AXP209I2CState *s = AXP209(i2c); + + s->count = 0; + + return 0; +} + +/* Called when master requests read */ +static uint8_t axp209_rx(I2CSlave *i2c) +{ + AXP209I2CState *s = AXP209(i2c); + uint8_t ret = 0xff; + + if (s->ptr < NR_REGS) { + ret = s->regs[s->ptr++]; + } + + trace_axp209_rx(s->ptr - 1, ret); + + return ret; +} + +/* + * Called when master sends write. + * Update ptr with byte 0, then perform write with second byte. + */ +static int axp209_tx(I2CSlave *i2c, uint8_t data) +{ + AXP209I2CState *s = AXP209(i2c); + + if (s->count == 0) { + /* Store register address */ + s->ptr = data; + s->count++; + trace_axp209_select(data); + } else { + trace_axp209_tx(s->ptr, data); + if (s->ptr == REG_DC_DC2_OUT_V_CTRL) { + s->regs[s->ptr++] = data; + } + } + + return 0; +} + +static const VMStateDescription vmstate_axp209 = { + .name = TYPE_AXP209_PMU, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(regs, AXP209I2CState, NR_REGS), + VMSTATE_UINT8(count, AXP209I2CState), + VMSTATE_UINT8(ptr, AXP209I2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void axp209_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + I2CSlaveClass *isc = I2C_SLAVE_CLASS(oc); + ResettableClass *rc = RESETTABLE_CLASS(oc); + + rc->phases.enter = axp209_reset_enter; + dc->vmsd = &vmstate_axp209; + isc->event = axp209_event; + isc->recv = axp209_rx; + isc->send = axp209_tx; +} + +static const TypeInfo axp209_info = { + .name = TYPE_AXP209_PMU, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(AXP209I2CState), + .class_init = axp209_class_init +}; + +static void axp209_register_devices(void) +{ + type_register_static(&axp209_info); +} + +type_init(axp209_register_devices); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ ARM Machines Allwinner-a10 M: Beniamino Galvani <b.galvani@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> +R: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/*/allwinner* F: include/hw/*/allwinner* F: hw/arm/cubieboard.c F: docs/system/arm/cubieboard.rst +F: hw/misc/axp209.c Allwinner-h3 M: Niek Linnenbank <nieklinnenbank@gmail.com> diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10_CCM config ALLWINNER_A10_DRAMC bool +config AXP209_PMU + bool + depends on I2C + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c' softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-sysctrl.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-sid.c')) +softmmu_ss.add(when: 'CONFIG_AXP209_PMU', if_true: files('axp209.c')) softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('arm_sysctl.c')) softmmu_ss.add(when: 'CONFIG_NSERIES', if_true: files('cbus.c')) softmmu_ss.add(when: 'CONFIG_ECCMEMCTL', if_true: files('eccmemctl.c')) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" avr_power_read(uint8_t value) "power_reduc read value:%u" avr_power_write(uint8_t value) "power_reduc write value:%u" +# axp209.c +axp209_rx(uint8_t reg, uint8_t data) "Read reg 0x%" PRIx8 " : 0x%" PRIx8 +axp209_select(uint8_t reg) "Accessing reg 0x%" PRIx8 +axp209_tx(uint8_t reg, uint8_t data) "Write reg 0x%" PRIx8 " : 0x%" PRIx8 + # eccmemctl.c ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x" ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> SPL Boot for Cubieboard expects AXP209 connected to I2C0 bus. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221226220303.14420-6-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 6 ++++++ hw/arm/Kconfig | 1 + 2 files changed, 7 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/qdev-properties.h" #include "hw/arm/allwinner-a10.h" +#include "hw/i2c/i2c.h" static struct arm_boot_info cubieboard_binfo = { .loader_start = AW_A10_SDRAM_BASE, @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) BlockBackend *blk; BusState *bus; DeviceState *carddev; + I2CBus *i2c; /* BIOS is not supported by this board */ if (machine->firmware) { @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) exit(1); } + /* Connect AXP 209 */ + i2c = I2C_BUS(qdev_get_child_bus(DEVICE(&a10->i2c0), "i2c")); + i2c_slave_create_simple(i2c, "axp209_pmu", 0x34); + /* Retrieve SD bus */ di = drive_get(IF_SD, 0, 0); blk = di ? blk_by_legacy_dinfo(di) : NULL; diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select ALLWINNER_I2C + select AXP209_PMU select SERIAL select UNIMP -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch enables copying of SPL from MMC if `-kernel` parameter is not passed when starting QEMU. SPL is copied to SRAM_A. The approach is reused from Allwinner H3 implementation. Tested with Armbian and custom Yocto image. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-7-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 21 +++++++++++++++++++++ hw/arm/allwinner-a10.c | 18 ++++++++++++++++++ hw/arm/cubieboard.c | 5 +++++ 3 files changed, 44 insertions(+) diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" #include "hw/i2c/allwinner-i2c.h" +#include "sysemu/block-backend.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { OHCISysBusState ohci[AW_A10_NUM_USB]; }; +/** + * Emulate Boot ROM firmware setup functionality. + * + * A real Allwinner A10 SoC contains a Boot ROM + * which is the first code that runs right after + * the SoC is powered on. The Boot ROM is responsible + * for loading user code (e.g. a bootloader) from any + * of the supported external devices and writing the + * downloaded code to internal SRAM. After loading the SoC + * begins executing the code written to SRAM. + * + * This function emulates the Boot ROM by copying 32 KiB + * of data at offset 8 KiB from the given block device and writes it to + * the start of the first internal SRAM memory. + * + * @s: Allwinner A10 state object pointer + * @blk: Block backend device object pointer + */ +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk); + #endif diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#include "hw/loader.h" +#define AW_A10_SRAM_A_BASE 0x00000000 #define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 @@ -XXX,XX +XXX,XX @@ #define AW_A10_RTC_BASE 0x01c20d00 #define AW_A10_I2C0_BASE 0x01c2ac00 +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk) +{ + const int64_t rom_size = 32 * KiB; + g_autofree uint8_t *buffer = g_new0(uint8_t, rom_size); + + if (blk_pread(blk, 8 * KiB, rom_size, buffer, 0) < 0) { + error_setg(&error_fatal, "%s: failed to read BlockBackend data", + __func__); + return; + } + + rom_add_blob("allwinner-a10.bootrom", buffer, rom_size, + rom_size, AW_A10_SRAM_A_BASE, + NULL, NULL, NULL, NULL, false); +} + static void aw_a10_init(Object *obj) { AwA10State *s = AW_A10(obj); diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), AW_A10_SDRAM_BASE, machine->ram); + /* Load target kernel or start using BootROM */ + if (!machine->kernel_filename && blk && blk_is_available(blk)) { + /* Use Boot ROM to copy data from SD card to SRAM */ + allwinner_a10_bootrom_setup(a10, blk); + } /* TODO create and connect IDE devices for ide_drive_get() */ cubieboard_binfo.ram_size = machine->ram_size; -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> Cubieboard now can boot directly from SD card, without the need to pass `-kernel` parameter. Update Avocado tests to cover this functionality. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-8-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_cubieboard_sata(self): 'sda') # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage limited') + def test_arm_cubieboard_openwrt_22_03_2(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:cubieboard + :avocado: tags=device:sd + """ + + # This test download a 7.5 MiB compressed image and expand it + # to 126 MiB. + image_url = ('https://downloads.openwrt.org/releases/22.03.2/targets/' + 'sunxi/cortexa8/openwrt-22.03.2-sunxi-cortexa8-' + 'cubietech_a10-cubieboard-ext4-sdcard.img.gz') + image_hash = ('94b5ecbfbc0b3b56276e5146b899eafa' + '2ac5dc2d08733d6705af9f144f39f554') + image_path_gz = self.fetch_asset(image_url, asset_hash=image_hash, + algorithm='sha256') + image_path = archive.extract(image_path_gz, self.workdir) + image_pow2ceil_expand(image_path) + + self.vm.set_console() + self.vm.add_args('-drive', 'file=' + image_path + ',if=sd,format=raw', + '-nic', 'user', + '-no-reboot') + self.vm.launch() + + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'usbcore.nousb ' + 'noreboot') + + self.wait_for_console_pattern('U-Boot SPL') + + interrupt_interactive_console_until_pattern( + self, 'Hit any key to stop autoboot:', '=>') + exec_command_and_wait_for_pattern(self, "setenv extraargs '" + + kernel_command_line + "'", '=>') + exec_command_and_wait_for_pattern(self, 'boot', 'Starting kernel ...'); + + self.wait_for_console_pattern( + 'Please press Enter to activate this console.') + + exec_command_and_wait_for_pattern(self, ' ', 'root@') + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'Allwinner sun4i/sun5i') + # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_TIMEOUT_EXPECTED'), 'Test might timeout') def test_arm_quanta_gsj(self): """ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Don't dereference CPUTLBEntryFull until we verify that the page is valid. Move the other user-only info field updates after the valid check to match. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1412 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230104190056.305143-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, #ifdef CONFIG_USER_ONLY flags = probe_access_flags(env, addr, access_type, mmu_idx, nofault, &info->host, retaddr); - memset(&info->attrs, 0, sizeof(info->attrs)); - /* Require both ANON and MTE; see allocation_tag_mem(). */ - info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); #else CPUTLBEntryFull *full; flags = probe_access_full(env, addr, access_type, mmu_idx, nofault, &info->host, &full, retaddr); - info->attrs = full->attrs; - info->tagged = full->pte_attrs == 0xf0; #endif info->flags = flags; @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, return false; } +#ifdef CONFIG_USER_ONLY + memset(&info->attrs, 0, sizeof(info->attrs)); + /* Require both ANON and MTE; see allocation_tag_mem(). */ + info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); +#else + info->attrs = full->attrs; + info->tagged = full->pte_attrs == 0xf0; +#endif + /* Ensure that info->host[] is relative to addr, not addr + mem_off. */ info->host -= mem_off; return true; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa255_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 2 +- hw/arm/gumstix.c | 3 +-- hw/arm/pxa2xx.c | 4 +++- hw/arm/tosa.c | 2 +- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, const char *revision); -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size); +PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t connex_rom = 0x01000000; uint32_t connex_ram = 0x04000000; - cpu = pxa255_init(address_space_mem, connex_ram); + cpu = pxa255_init(connex_ram); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qemu/module.h" #include "qapi/error.h" +#include "exec/address-spaces.h" #include "cpu.h" #include "hw/sysbus.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ PXA2xxState *pxa270_init(MemoryRegion *address_space, } /* Initialise a PXA255 integrated chip (ARM based core). */ -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size) +PXA2xxState *pxa255_init(unsigned int sdram_size) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ static void tosa_init(MachineState *machine) TC6393xbState *tmio; DeviceState *scp0, *scp1; - mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size); + mpu = pxa255_init(tosa_binfo.ram_size); memory_region_init_rom(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal); memory_region_add_subregion(address_space_mem, 0, rom); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa270_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 3 +-- hw/arm/gumstix.c | 3 +-- hw/arm/mainstone.c | 10 ++++------ hw/arm/pxa2xx.c | 4 ++-- hw/arm/spitz.c | 6 ++---- hw/arm/z2.c | 3 +-- 6 files changed, 11 insertions(+), 18 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { # define PA_FMT "0x%08lx" -PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, - const char *revision); +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *revision); PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t verdex_rom = 0x02000000; uint32_t verdex_ram = 0x10000000; - cpu = pxa270_init(address_space_mem, verdex_ram, machine->cpu_type); + cpu = pxa270_init(verdex_ram, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info mainstone_binfo = { .ram_size = 0x04000000, }; -static void mainstone_common_init(MemoryRegion *address_space_mem, - MachineState *machine, +static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { uint32_t sector_len = 256 * 1024; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0x00000000, rom); /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, static void mainstone_init(MachineState *machine) { - mainstone_common_init(get_system_memory(), machine, mainstone, 0x196); + mainstone_common_init(machine, mainstone, 0x196); } static void mainstone2_machine_init(MachineClass *mc) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_reset(void *opaque, int line, int level) } /* Initialise a PXA270 integrated chip (ARM based core). */ -PXA2xxState *pxa270_init(MemoryRegion *address_space, - unsigned int sdram_size, const char *cpu_type) +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *cpu_type) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; - MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(spitz_binfo.ram_size, machine->cpu_type); sms->mpu = mpu; sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); memory_region_init_rom(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0, rom); /* Setup peripherals */ spitz_keyboard_register(mpu); diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { static void z2_init(MachineState *machine) { - MemoryRegion *address_space_mem = get_system_memory(); uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) DeviceState *wm; /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type); + mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "qom/object.h" +#define RAM_SIZE (512 * MiB) +#define FLASH_SIZE (32 * MiB) +#define FLASH_SECTOR_SIZE (64 * KiB) + struct CollieMachineState { MachineState parent; @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CollieMachineState, COLLIE_MACHINE) static struct arm_boot_info collie_binfo = { .loader_start = SA_SDCS0, - .ram_size = 0x20000000, + .ram_size = RAM_SIZE, }; static void collie_init(MachineState *machine) @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", 0x02000000, + pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", 0x02000000, + pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); sysbus_create_simple("scoop", 0x40800000, NULL); @@ -XXX,XX +XXX,XX @@ static void collie_machine_class_init(ObjectClass *oc, void *data) mc->init = collie_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("sa1110"); - mc->default_ram_size = 0x20000000; + mc->default_ram_size = RAM_SIZE; mc->default_ram_id = "strongarm.sdram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info collie_binfo = { static void collie_init(MachineState *machine) { - DriveInfo *dinfo; MachineClass *mc = MACHINE_GET_CLASS(machine); CollieMachineState *cms = COLLIE_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); - dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); - - dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + for (unsigned i = 0; i < 2; i++) { + DriveInfo *dinfo = drive_get(IF_PFLASH, 0, i); + pflash_cfi01_register(i ? SA_CS1 : SA_CS0, + i ? "collie.fl2" : "collie.fl1", FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + } sysbus_create_simple("scoop", 0x40800000, NULL); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Add a comment describing the Connex uses a Numonyx RC28F128J3F75 flash, and the Verdex uses a Micron RC28F256P30TFA. Correct the Verdex machine description (we model the 'Pro' board). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-6-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ * Contributions after 2012-01-13 are licensed under the terms of the * GNU GPL, version 2 or (at your option) any later version. */ - + /* * Example usage: * @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) exit(1); } + /* Numonyx RC28F128J3F75 */ if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) exit(1); } + /* Micron RC28F256P30TFA */ if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); - mc->desc = "Gumstix Verdex (PXA270)"; + mc->desc = "Gumstix Verdex Pro XL6P COMs (PXA270)"; mc->init = verdex_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-7-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "hw/arm/pxa.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "cpu.h" -static const int sector_len = 128 * 1024; +#define CONNEX_FLASH_SIZE (16 * MiB) +#define CONNEX_RAM_SIZE (64 * MiB) + +#define VERDEX_FLASH_SIZE (32 * MiB) +#define VERDEX_RAM_SIZE (256 * MiB) + +#define FLASH_SECTOR_SIZE (128 * KiB) static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t connex_rom = 0x01000000; - uint32_t connex_ram = 0x04000000; - - cpu = pxa255_init(connex_ram); + cpu = pxa255_init(CONNEX_RAM_SIZE); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, + if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t verdex_rom = 0x02000000; - uint32_t verdex_ram = 0x10000000; - - cpu = pxa270_init(verdex_ram, machine->cpu_type); + cpu = pxa270_init(VERDEX_RAM_SIZE, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, + if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mainstone.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ * GNU GPL, version 2 or (at your option) any later version. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "hw/arm/pxa.h" @@ -XXX,XX +XXX,XX @@ static const struct keymap map[0xE0] = { enum mainstone_model_e { mainstone }; -#define MAINSTONE_RAM 0x04000000 -#define MAINSTONE_ROM 0x00800000 -#define MAINSTONE_FLASH 0x02000000 +#define MAINSTONE_RAM_SIZE (64 * MiB) +#define MAINSTONE_ROM_SIZE (8 * MiB) +#define MAINSTONE_FLASH_SIZE (32 * MiB) static struct arm_boot_info mainstone_binfo = { .loader_start = PXA2XX_SDRAM_BASE, - .ram_size = 0x04000000, + .ram_size = MAINSTONE_RAM_SIZE, }; +#define FLASH_SECTOR_SIZE (256 * KiB) + static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { - uint32_t sector_len = 256 * 1024; hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 }; PXA2xxState *mpu; DeviceState *mst_irq; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* Setup CPU & memory */ mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); - memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, + memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM_SIZE, &error_fatal); memory_region_add_subregion(get_system_memory(), 0x00000000, rom); @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, dinfo = drive_get(IF_PFLASH, 0, i); if (!pflash_cfi01_register(mainstone_flash_base[i], i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH, + MAINSTONE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "cpu.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo musicpal_key_info = { .class_init = musicpal_key_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static struct arm_boot_info musicpal_binfo = { .loader_start = 0x0, .board_id = 0x20e, @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) BlockBackend *blk = blk_by_legacy_dinfo(dinfo); flash_size = blk_getlength(blk); - if (flash_size != 8*1024*1024 && flash_size != 16*1024*1024 && - flash_size != 32*1024*1024) { + if (flash_size != 8 * MiB && flash_size != 16 * MiB && + flash_size != 32 * MiB) { error_report("Invalid flash image size"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) */ pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, "musicpal.flash", flash_size, - blk, 0x10000, + blk, FLASH_SECTOR_SIZE, MP_FLASH_SIZE_MAX / flash_size, 2, 0x00BF, 0x236D, 0x0000, 0x0000, 0x5555, 0x2AAA, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The total_ram_v1/total_ram_v2 definitions were never used. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { #define flash0_size (16 * 1024 * 1024) #define flash1_size ( 8 * 1024 * 1024) #define flash2_size (32 * 1024 * 1024) -#define total_ram_v1 (sdram_size + flash0_size + flash1_size + OMAP15XX_SRAM_SIZE) -#define total_ram_v2 (sdram_size + flash2_size + OMAP15XX_SRAM_SIZE) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ * with this program; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "ui/console.h" #include "hw/arm/omap.h" @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -#define sdram_size 0x02000000 -#define sector_size (128 * 1024) -#define flash0_size (16 * 1024 * 1024) -#define flash1_size ( 8 * 1024 * 1024) -#define flash2_size (32 * 1024 * 1024) +#define SDRAM_SIZE (32 * MiB) +#define SECTOR_SIZE (128 * KiB) +#define FLASH0_SIZE (16 * MiB) +#define FLASH1_SIZE (8 * MiB) +#define FLASH2_SIZE (32 * MiB) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, - .ram_size = sdram_size, + .ram_size = SDRAM_SIZE, .board_id = 0x265, }; @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) static uint32_t cs3val = 0x00001139; DriveInfo *dinfo; int fl_idx; - uint32_t flash_size = flash0_size; + uint32_t flash_size = FLASH0_SIZE; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) } if (version == 2) { - flash_size = flash2_size; + flash_size = FLASH2_SIZE; } memory_region_add_subregion(address_space, OMAP_EMIFF_BASE, machine->ram); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) if (!pflash_cfi01_register(OMAP_CS0_BASE, "omap_sx1.flash0-1", flash_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) (dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { MemoryRegion *flash_1 = g_new(MemoryRegion, 1); memory_region_init_rom(flash_1, NULL, "omap_sx1.flash1-0", - flash1_size, &error_fatal); + FLASH1_SIZE, &error_fatal); memory_region_add_subregion(address_space, OMAP_CS1_BASE, flash_1); memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, - "sx1.cs1", OMAP_CS1_SIZE - flash1_size); + "sx1.cs1", OMAP_CS1_SIZE - FLASH1_SIZE); memory_region_add_subregion(address_space, - OMAP_CS1_BASE + flash1_size, &cs[1]); + OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", flash1_size, + "omap_sx1.flash1-1", FLASH1_SIZE, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v2_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v2; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v1_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v1; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/z2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "hw/arm/pxa.h" #include "hw/arm/boot.h" #include "hw/i2c/i2c.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { .class_init = aer915_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static void z2_init(MachineState *machine) { - uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; void *z2_lcd; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Upon introduction in commit b8433303fb ("Set proper device-width for vexpress flash"), ve_pflash_cfi01_register() was calling qdev_init_nofail() which can not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/vexpress.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0", dinfo); - if (!pflash0) { - error_report("vexpress: error registering flash 0"); - exit(1); - } if (map[VE_NORFLASHALIAS] != -1) { /* Map flash 0 as an alias into low memory */ @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) } dinfo = drive_get(IF_PFLASH, 0, 1); - if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", - dinfo)) { - error_report("vexpress: error registering flash 1"); - exit(1); - } + ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", dinfo); sram_size = 0x2000000; memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since its QOM'ification in commit 368a354f02 ("pflash_cfi0x: QOMified") the pflash_cfi01_register() function does not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 18 ++++++------------ hw/arm/mainstone.c | 13 +++++-------- hw/arm/omap_sx1.c | 22 ++++++++-------------- hw/arm/versatilepb.c | 6 ++---- hw/arm/z2.c | 9 +++------ 5 files changed, 24 insertions(+), 44 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 36 */ smc91c111_init(&nd_table[0], 0x04000300, @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 99 */ smc91c111_init(&nd_table[0], 0x04000300, diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { dinfo = drive_get(IF_PFLASH, 0, i); - if (!pflash_cfi01_register(mainstone_flash_base[i], - i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(mainstone_flash_base[i], + i ? "mainstone.flash1" : "mainstone.flash0", + MAINSTONE_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); } mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS, diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) fl_idx = 0; if ((dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { - if (!pflash_cfi01_register(OMAP_CS0_BASE, - "omap_sx1.flash0-1", flash_size, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS0_BASE, + "omap_sx1.flash0-1", flash_size, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) memory_region_add_subregion(address_space, OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); - if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", FLASH1_SIZE, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS1_BASE, + "omap_sx1.flash1-1", FLASH1_SIZE, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } else { memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ static void versatile_init(MachineState *machine, int board_id) /* 0x34000000 NOR Flash */ dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", + pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", VERSATILE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, VERSATILE_FLASH_SECT_SIZE, - 4, 0x0089, 0x0018, 0x0000, 0x0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory.\n"); - } + 4, 0x0089, 0x0018, 0x0000, 0x0, 0); versatile_binfo.ram_size = machine->ram_size; versatile_binfo.board_id = board_id; diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); /* setup keypad */ pxa27x_register_keypad(mpu->kp, map, 0x100); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> To avoid forward-declaring PXA2xxI2CState, declare PXA2XX_I2C before its use in pxa2xx_i2c_init() prototype. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ void pxa27x_register_keypad(PXA2xxKeyPadState *kp, const struct keymap *map, int size); /* pxa2xx.c */ -typedef struct PXA2xxI2CState PXA2xxI2CState; +#define TYPE_PXA2XX_I2C "pxa2xx_i2c" +OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) + PXA2xxI2CState *pxa2xx_i2c_init(hwaddr base, qemu_irq irq, uint32_t page_size); I2CBus *pxa2xx_i2c_bus(PXA2xxI2CState *s); -#define TYPE_PXA2XX_I2C "pxa2xx_i2c" typedef struct PXA2xxI2SState PXA2xxI2SState; -OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) #define TYPE_PXA2XX_FIR "pxa2xx-fir" OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxFIrState, PXA2XX_FIR) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Add a local 'struct omap_gpif_s *' variable to improve readability. (This also eases next commit conversion). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/omap_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1; + struct omap_gpif_s *p = opaque; + struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; if (level) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap1.c | 115 ++++++++++++++++++-------------------- hw/arm/omap2.c | 40 ++++++------- hw/arm/omap_sx1.c | 2 +- hw/arm/palm.c | 2 +- hw/char/omap_uart.c | 7 +-- hw/display/omap_dss.c | 15 +++-- hw/display/omap_lcdc.c | 9 ++- hw/dma/omap_dma.c | 15 +++-- hw/gpio/omap_gpio.c | 15 +++-- hw/intc/omap_intc.c | 12 ++-- hw/misc/omap_gpmc.c | 12 ++-- hw/misc/omap_l4.c | 7 +-- hw/misc/omap_sdrc.c | 7 +-- hw/misc/omap_tap.c | 5 +- hw/sd/omap_mmc.c | 9 ++- hw/ssi/omap_spi.c | 7 +-- hw/timer/omap_gptimer.c | 22 ++++---- hw/timer/omap_synctimer.c | 4 +- 18 files changed, 142 insertions(+), 163 deletions(-) diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -XXX,XX +XXX,XX @@ static void omap_timer_fire(void *opaque) static void omap_timer_tick(void *opaque) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); omap_timer_fire(timer); @@ -XXX,XX +XXX,XX @@ static void omap_timer_tick(void *opaque) static void omap_timer_clk_update(void *opaque, int line, int on) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ static void omap_timer_clk_setup(struct omap_mpu_timer_s *timer) static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, static void omap_mpu_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_watchdog_timer_s { static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, static void omap_wd_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_32khz_timer_s { static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, static void omap_os_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static struct omap_32khz_timer_s *omap_os_timer_init(MemoryRegion *memory, static uint64_t omap_ulpd_pm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_ulpd_req_update(struct omap_mpu_state_s *s, static void omap_ulpd_pm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; int64_t now, ticks; int div, mult; static const int bypass_div[4] = { 1, 2, 4, 4 }; @@ -XXX,XX +XXX,XX @@ static void omap_ulpd_pm_init(MemoryRegion *system_memory, static uint64_t omap_pin_cfg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_pin_modconf1_update(struct omap_mpu_state_s *s, static void omap_pin_cfg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t diff; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_pin_cfg_init(MemoryRegion *system_memory, static uint64_t omap_id_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static void omap_id_init(MemoryRegion *memory, struct omap_mpu_state_s *mpu) static uint64_t omap_mpui_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpui_read(void *opaque, hwaddr addr, static void omap_mpui_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_tipb_bridge_s { static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, static void omap_tipb_bridge_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static struct omap_tipb_bridge_s *omap_tipb_bridge_init( static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, static void omap_tcmi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct dpll_ctl_s { static uint64_t omap_dpll_read(void *opaque, hwaddr addr, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dpll_read(void *opaque, hwaddr addr, static void omap_dpll_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; uint16_t diff; static const int bypass_div[4] = { 1, 2, 4, 4 }; int div, mult; @@ -XXX,XX +XXX,XX @@ static struct dpll_ctl_s *omap_dpll_init(MemoryRegion *memory, static uint64_t omap_clkm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_clkm_ckout1_update(struct omap_mpu_state_s *s, static void omap_clkm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; omap_clk clk; static const char *clkschemename[8] = { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_clkm_ops = { static uint64_t omap_clkdsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; CPUState *cpu = CPU(s->cpu); if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_clkdsp_idlect2_update(struct omap_mpu_state_s *s, static void omap_clkdsp_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; if (size != 2) { @@ -XXX,XX +XXX,XX @@ struct omap_mpuio_s { static void omap_mpuio_set(void *opaque, int line, int level) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; uint16_t prev = s->inputs; if (level) @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_kbd_update(struct omap_mpuio_s *s) static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, static void omap_mpuio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_reset(struct omap_mpuio_s *s) static void omap_mpuio_onoff(void *opaque, int line, int on) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; s->clk = on; if (on) @@ -XXX,XX +XXX,XX @@ static void omap_uwire_transfer_start(struct omap_uwire_s *s) } } -static uint64_t omap_uwire_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uwire_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uwire_read(void *opaque, hwaddr addr, static void omap_uwire_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_update(struct omap_pwl_s *s) } } -static uint64_t omap_pwl_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwl_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwl_read(void *opaque, hwaddr addr, static void omap_pwl_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_reset(struct omap_pwl_s *s) static void omap_pwl_clk_update(void *opaque, int line, int on) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; s->clk = on; omap_pwl_update(s); @@ -XXX,XX +XXX,XX @@ struct omap_pwt_s { omap_clk clk; }; -static uint64_t omap_pwt_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwt_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwt_read(void *opaque, hwaddr addr, static void omap_pwt_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_rtc_alarm_update(struct omap_rtc_s *s) printf("%s: conversion failed\n", __func__); } -static uint64_t omap_rtc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rtc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint8_t i; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rtc_read(void *opaque, hwaddr addr, static void omap_rtc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; struct tm new_tm; time_t ti[2]; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_rx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_source_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->rx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_tx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_sink_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->tx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_req_update(struct omap_mcbsp_s *s) static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, static void omap_mcbsp_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; switch (offset) { @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr, static void omap_mcbsp_writew(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (offset == 0x04) { /* DXR */ @@ -XXX,XX +XXX,XX @@ static struct omap_mcbsp_s *omap_mcbsp_init(MemoryRegion *system_memory, static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->rx_rate) { s->rx_req = s->codec->in.len; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) static void omap_mcbsp_i2s_start(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->tx_rate) { s->tx_req = s->codec->out.size; @@ -XXX,XX +XXX,XX @@ static void omap_lpg_reset(struct omap_lpg_s *s) omap_lpg_update(s); } -static uint64_t omap_lpg_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lpg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lpg_read(void *opaque, hwaddr addr, static void omap_lpg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_lpg_ops = { static void omap_lpg_clk_update(void *opaque, int line, int on) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; s->clk = on; omap_lpg_update(s); @@ -XXX,XX +XXX,XX @@ static void omap_setup_mpui_io(MemoryRegion *system_memory, /* General chip reset */ static void omap1_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_mpu_timer_reset(mpu->timer[0]); @@ -XXX,XX +XXX,XX @@ static void omap_setup_dsp_mapping(MemoryRegion *system_memory, void omap_mpu_wakeup(void *opaque, int irq, int req) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; CPUState *cpu = CPU(mpu->cpu); if (cpu->halted) { diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ static inline void omap_eac_out_empty(struct omap_eac_s *s) static void omap_eac_in_cb(void *opaque, int avail_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.rxavail = avail_b >> 2; omap_eac_in_refill(s); @@ -XXX,XX +XXX,XX @@ static void omap_eac_in_cb(void *opaque, int avail_b) static void omap_eac_out_cb(void *opaque, int free_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.txavail = free_b >> 2; if (s->codec.txlen) @@ -XXX,XX +XXX,XX @@ static void omap_eac_reset(struct omap_eac_s *s) omap_eac_interrupt_update(s); } -static uint64_t omap_eac_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_eac_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; uint32_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_eac_read(void *opaque, hwaddr addr, static void omap_eac_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_sti_reset(struct omap_sti_s *s) static uint64_t omap_sti_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_read(void *opaque, hwaddr addr, static void omap_sti_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_sti_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, unsigned size) { OMAP_BAD_REG(addr); return 0; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, static void omap_sti_fifo_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; int ch = addr >> 6; uint8_t byte = value; @@ -XXX,XX +XXX,XX @@ static void omap_prcm_int_update(struct omap_prcm_s *s, int dom) static uint64_t omap_prcm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_prcm_dpll_update(struct omap_prcm_s *s) static void omap_prcm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_sysctl_s { static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int value; @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) return 0; } -static void omap_sysctl_write8(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write8(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int prev_value; @@ -XXX,XX +XXX,XX @@ static void omap_sysctl_write8(void *opaque, hwaddr addr, } } -static void omap_sysctl_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static struct omap_sysctl_s *omap_sysctl_init(struct omap_target_agent_s *ta, /* General chip reset */ static void omap2_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_prcm_reset(mpu->prcm); diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static uint64_t static_read(void *opaque, hwaddr offset, unsigned size) { - uint32_t *val = (uint32_t *) opaque; + uint32_t *val = opaque; uint32_t mask = (4 / size) - 1; return *val >> ((offset & mask) << 3); diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ static struct { static void palmte_button_event(void *opaque, int keycode) { - struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *cpu = opaque; if (palmte_keymap[keycode & 0x7f].row != -1) omap_mpuio_key(cpu->mpuio, diff --git a/hw/char/omap_uart.c b/hw/char/omap_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/omap_uart.c +++ b/hw/char/omap_uart.c @@ -XXX,XX +XXX,XX @@ struct omap_uart_s *omap_uart_init(hwaddr base, return s; } -static uint64_t omap_uart_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uart_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { return omap_badwidth_read8(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uart_read(void *opaque, hwaddr addr, static void omap_uart_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { omap_badwidth_write8(opaque, addr, value); diff --git a/hw/display/omap_dss.c b/hw/display/omap_dss.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_dss.c +++ b/hw/display/omap_dss.c @@ -XXX,XX +XXX,XX @@ void omap_dss_reset(struct omap_dss_s *s) static uint64_t omap_diss_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_diss_read(void *opaque, hwaddr addr, static void omap_diss_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_diss_ops = { static uint64_t omap_disc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_disc_read(void *opaque, hwaddr addr, static void omap_disc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_rfbi_transfer_start(struct omap_dss_s *s) omap_dispc_interrupt_update(s); } -static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, static void omap_rfbi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/display/omap_lcdc.c b/hw/display/omap_lcdc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_lcdc.c +++ b/hw/display/omap_lcdc.c @@ -XXX,XX +XXX,XX @@ static void draw_line16_32(void *opaque, uint8_t *d, const uint8_t *s, static void omap_update_display(void *opaque) { - struct omap_lcd_panel_s *omap_lcd = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *omap_lcd = opaque; DisplaySurface *surface; drawfn draw_line; int size, height, first, last; @@ -XXX,XX +XXX,XX @@ static void omap_lcd_update(struct omap_lcd_panel_s *s) { } } -static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, static void omap_lcdc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ diff --git a/hw/dma/omap_dma.c b/hw/dma/omap_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/omap_dma.c +++ b/hw/dma/omap_dma.c @@ -XXX,XX +XXX,XX @@ static int omap_dma_sys_read(struct omap_dma_s *s, int offset, return 0; } -static uint64_t omap_dma_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_dma_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma_read(void *opaque, hwaddr addr, static void omap_dma_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_dma_ops = { static void omap_dma_request(void *opaque, int drq, int req) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; /* The request pins are level triggered in QEMU. */ if (req) { if (~s->dma->drqbmp & (1ULL << drq)) { @@ -XXX,XX +XXX,XX @@ static void omap_dma_request(void *opaque, int drq, int req) /* XXX: this won't be needed once soc_dma knows about clocks. */ static void omap_dma_clk_update(void *opaque, int line, int on) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int i; s->dma->freq = omap_clk_getrate(s->clk); @@ -XXX,XX +XXX,XX @@ static void omap_dma_interrupts_4_update(struct omap_dma_s *s) static uint64_t omap_dma4_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int irqn = 0, chnum; struct omap_dma_channel_s *ch; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma4_read(void *opaque, hwaddr addr, static void omap_dma4_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int chnum, irqn = 0; struct omap_dma_channel_s *ch; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ static void omap_gpio_set(void *opaque, int line, int level) static uint64_t omap_gpio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpio_read(void *opaque, hwaddr addr, static void omap_gpio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_module_reset(struct omap2_gpio_s *s) static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; switch (addr) { case 0x00: /* GPIO_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) static void omap2_gpio_module_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; uint32_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) s->gpo = 0; } -static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; diff --git a/hw/misc/omap_gpmc.c b/hw/misc/omap_gpmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_gpmc.c +++ b/hw/misc/omap_gpmc.c @@ -XXX,XX +XXX,XX @@ static void omap_gpmc_dma_update(struct omap_gpmc_s *s, int value) static uint64_t omap_nand_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; uint64_t v; nand_setpins(f->dev, 0, 0, 0, 1, 0); switch (omap_gpmc_devsize(f)) { @@ -XXX,XX +XXX,XX @@ static void omap_nand_setio(DeviceState *dev, uint64_t value, static void omap_nand_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; nand_setpins(f->dev, 0, 0, 0, 1, 0); omap_nand_setio(f->dev, value, omap_gpmc_devsize(f), size); } @@ -XXX,XX +XXX,XX @@ static void fill_prefetch_fifo(struct omap_gpmc_s *s) static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; uint32_t data; if (s->prefetch.config1 & 1) { /* The TRM doesn't define the behaviour if you read from the @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, static void omap_gpmc_prefetch_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs = prefetch_cs(s->prefetch.config1); if ((s->prefetch.config1 & 1) == 0) { /* The TRM doesn't define the behaviour of writing to the @@ -XXX,XX +XXX,XX @@ static int gpmc_wordaccess_only(hwaddr addr) static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, static void omap_gpmc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; diff --git a/hw/misc/omap_l4.c b/hw/misc/omap_l4.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_l4.c +++ b/hw/misc/omap_l4.c @@ -XXX,XX +XXX,XX @@ hwaddr omap_l4_region_size(struct omap_target_agent_s *ta, return ta->start[region].size; } -static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, static void omap_l4ta_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_sdrc.c b/hw/misc/omap_sdrc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_sdrc.c +++ b/hw/misc/omap_sdrc.c @@ -XXX,XX +XXX,XX @@ void omap_sdrc_reset(struct omap_sdrc_s *s) s->config = 0x10; } -static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, static void omap_sdrc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_tap.c b/hw/misc/omap_tap.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_tap.c +++ b/hw/misc/omap_tap.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" /* TEST-Chip-level TAP */ -static uint64_t omap_tap_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_tap_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -XXX,XX +XXX,XX @@ void omap_mmc_reset(struct omap_mmc_s *host) device_cold_reset(DEVICE(host->card)); } -static uint64_t omap_mmc_read(void *opaque, hwaddr offset, - unsigned size) +static uint64_t omap_mmc_read(void *opaque, hwaddr offset, unsigned size) { uint16_t i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, offset); @@ -XXX,XX +XXX,XX @@ static void omap_mmc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { int i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, offset, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_mmc_ops = { static void omap_mmc_cover_cb(void *opaque, int line, int level) { - struct omap_mmc_s *host = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *host = opaque; if (!host->cdet_state && level) { host->status |= 0x0002; diff --git a/hw/ssi/omap_spi.c b/hw/ssi/omap_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/omap_spi.c +++ b/hw/ssi/omap_spi.c @@ -XXX,XX +XXX,XX @@ void omap_mcspi_reset(struct omap_mcspi_s *s) omap_mcspi_interrupt_update(s); } -static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; uint32_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, static void omap_mcspi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; if (size != 4) { diff --git a/hw/timer/omap_gptimer.c b/hw/timer/omap_gptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_gptimer.c +++ b/hw/timer/omap_gptimer.c @@ -XXX,XX +XXX,XX @@ static inline void omap_gp_timer_trigger(struct omap_gp_timer_s *timer) static void omap_gp_timer_tick(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (!timer->ar) { timer->st = 0; @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_tick(void *opaque) static void omap_gp_timer_match(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (timer->trigger == gpt_trigger_both) omap_gp_timer_trigger(timer); @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_match(void *opaque) static void omap_gp_timer_input(void *opaque, int line, int on) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; int trigger; switch (s->capture) { @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_input(void *opaque, int line, int on) static void omap_gp_timer_clk_update(void *opaque, int line, int on) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; omap_gp_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ void omap_gp_timer_reset(struct omap_gp_timer_s *s) static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; uint32_t ret; if (addr & 2) @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) } } -static void omap_gp_timer_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_write(void *opaque, hwaddr addr, } } -static void omap_gp_timer_writeh(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; if (addr & 2) omap_gp_timer_write(opaque, addr, (value << 16) | s->writeh); diff --git a/hw/timer/omap_synctimer.c b/hw/timer/omap_synctimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_synctimer.c +++ b/hw/timer/omap_synctimer.c @@ -XXX,XX +XXX,XX @@ void omap_synctimer_reset(struct omap_synctimer_s *s) static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; switch (addr) { case 0x00: /* 32KSYNCNT_REV */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) static uint32_t omap_synctimer_readh(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; uint32_t ret; if (addr & 2) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_gpif_s -> Omap1GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +++--- hw/gpio/omap_gpio.c | 16 ++++++++-------- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_i2c_set_fclk(OMAPI2CState *i2c, omap_clk clk); /* omap_gpio.c */ #define TYPE_OMAP1_GPIO "omap-gpio" -DECLARE_INSTANCE_CHECKER(struct omap_gpif_s, OMAP1_GPIO, +typedef struct Omap1GpioState Omap1GpioState; +DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap_gpif_s omap_gpif; typedef struct omap2_gpif_s omap2_gpif; /* TODO: clock framework (see above) */ -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk); +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpio_s { uint16_t pins; }; -struct omap_gpif_s { +struct Omap1GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpif_s *p = opaque; + Omap1GpioState *p = opaque; struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpio_module_ops = { static void omap_gpif_reset(DeviceState *dev) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); omap_gpio_reset(&s->omap1); } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpif_top_ops = { static void omap_gpio_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_gpif_s *s = OMAP1_GPIO(obj); + Omap1GpioState *s = OMAP1_GPIO(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); qdev_init_gpio_in(dev, omap_gpio_set, 16); @@ -XXX,XX +XXX,XX @@ static void omap_gpio_init(Object *obj) static void omap_gpio_realize(DeviceState *dev, Error **errp) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); if (!s->clk) { error_setg(errp, "omap-gpio: clk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_realize(DeviceState *dev, Error **errp) } } -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk) +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk) { gpio->clk = clk; } static Property omap_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap1GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap_gpio_info = { .name = TYPE_OMAP1_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap_gpif_s), + .instance_size = sizeof(Omap1GpioState), .instance_init = omap_gpio_init, .class_init = omap_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap2_gpif_s -> Omap2GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/gpio/omap_gpio.c | 20 ++++++++++---------- 2 files changed, 14 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" -DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, +typedef struct Omap2GpioState Omap2GpioState; +DECLARE_INSTANCE_CHECKER(Omap2GpioState, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap2_gpif_s omap2_gpif; - /* TODO: clock framework (see above) */ void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk); +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk); /* OMAP2 l4 Interconnect */ struct omap_l4_s; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap2_gpio_s { uint8_t delay; }; -struct omap2_gpif_s { +struct Omap2GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line) static void omap2_gpio_set(void *opaque, int line, int level) { - struct omap2_gpif_s *p = opaque; + Omap2GpioState *p = opaque; struct omap2_gpio_s *s = &p->modules[line >> 5]; line &= 31; @@ -XXX,XX +XXX,XX @@ static void omap_gpif_reset(DeviceState *dev) static void omap2_gpif_reset(DeviceState *dev) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); int i; for (i = 0; i < s->modulecount; i++) { @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static void omap_gpio_realize(DeviceState *dev, Error **errp) static void omap2_gpio_realize(DeviceState *dev, Error **errp) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); int i; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_gpio_info = { .class_init = omap_gpio_class_init, }; -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk) +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk) { gpio->iclk = clk; } -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk) +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk) { assert(i <= 5); gpio->fclk[i] = clk; } static Property omap2_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap2GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap2_gpio_info = { .name = TYPE_OMAP2_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap2_gpif_s), + .instance_size = sizeof(Omap2GpioState), .class_init = omap2_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_intr_handler_s -> OMAPIntcState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/intc/omap_intc.c | 38 +++++++++++++++++++------------------- 2 files changed, 23 insertions(+), 24 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_clk_reparent(omap_clk clk, omap_clk parent); /* omap_intc.c */ #define TYPE_OMAP_INTC "common-omap-intc" -typedef struct omap_intr_handler_s omap_intr_handler; -DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, - TYPE_OMAP_INTC) +typedef struct OMAPIntcState OMAPIntcState; +DECLARE_INSTANCE_CHECKER(OMAPIntcState, OMAP_INTC, TYPE_OMAP_INTC) /* @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, * (ie the struct omap_mpu_state_s*) to do the clockname to pointer * translation.) */ -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk); -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk); +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk); +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk); /* omap_i2c.c */ #define TYPE_OMAP_I2C "omap_i2c" diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_bank_s { unsigned char priority[32]; }; -struct omap_intr_handler_s { +struct OMAPIntcState { SysBusDevice parent_obj; qemu_irq *pins; @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_s { struct omap_intr_handler_bank_s bank[3]; }; -static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) +static void omap_inth_sir_update(OMAPIntcState *s, int is_fiq) { int i, j, sir_intr, p_intr, p; uint32_t level; @@ -XXX,XX +XXX,XX @@ static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) s->sir_intr[is_fiq] = sir_intr; } -static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) +static inline void omap_inth_update(OMAPIntcState *s, int is_fiq) { int i; uint32_t has_intr = 0; @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_inth_mem_ops = { static void omap_inth_reset(DeviceState *dev) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); int i; for (i = 0; i < s->nbanks; ++i){ @@ -XXX,XX +XXX,XX @@ static void omap_inth_reset(DeviceState *dev) static void omap_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->nbanks = 1; @@ -XXX,XX +XXX,XX @@ static void omap_intc_init(Object *obj) static void omap_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap-intc: clk not connected"); } } -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk) { intc->iclk = clk; } -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk) { intc->fclk = clk; } static Property omap_intc_properties[] = { - DEFINE_PROP_UINT32("size", struct omap_intr_handler_s, size, 0x100), + DEFINE_PROP_UINT32("size", OMAPIntcState, size, 0x100), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_inth_mem_ops = { static void omap2_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->level_only = 1; @@ -XXX,XX +XXX,XX @@ static void omap2_intc_init(Object *obj) static void omap2_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap2-intc: iclk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_intc_realize(DeviceState *dev, Error **errp) } static Property omap2_intc_properties[] = { - DEFINE_PROP_UINT8("revision", struct omap_intr_handler_s, + DEFINE_PROP_UINT8("revision", OMAPIntcState, revision, 0x21), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap2_intc_info = { static const TypeInfo omap_intc_type_info = { .name = TYPE_OMAP_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(omap_intr_handler), + .instance_size = sizeof(OMAPIntcState), .abstract = true, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename stellaris_adc_state -> StellarisADCState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 73 +++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 37 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) #define STELLARIS_ADC_FIFO_FULL 0x1000 #define TYPE_STELLARIS_ADC "stellaris-adc" -typedef struct StellarisADCState stellaris_adc_state; -DECLARE_INSTANCE_CHECKER(stellaris_adc_state, STELLARIS_ADC, - TYPE_STELLARIS_ADC) +typedef struct StellarisADCState StellarisADCState; +DECLARE_INSTANCE_CHECKER(StellarisADCState, STELLARIS_ADC, TYPE_STELLARIS_ADC) struct StellarisADCState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct StellarisADCState { qemu_irq irq[4]; }; -static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) +static uint32_t stellaris_adc_fifo_read(StellarisADCState *s, int n) { int tail; @@ -XXX,XX +XXX,XX @@ static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) return s->fifo[n].data[tail]; } -static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, +static void stellaris_adc_fifo_write(StellarisADCState *s, int n, uint32_t value) { int head; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, s->fifo[n].state |= STELLARIS_ADC_FIFO_FULL; } -static void stellaris_adc_update(stellaris_adc_state *s) +static void stellaris_adc_update(StellarisADCState *s) { int level; int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(stellaris_adc_state *s) +static void stellaris_adc_reset(StellarisADCState *s) { int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_UINT32(actss, stellaris_adc_state), - VMSTATE_UINT32(ris, stellaris_adc_state), - VMSTATE_UINT32(im, stellaris_adc_state), - VMSTATE_UINT32(emux, stellaris_adc_state), - VMSTATE_UINT32(ostat, stellaris_adc_state), - VMSTATE_UINT32(ustat, stellaris_adc_state), - VMSTATE_UINT32(sspri, stellaris_adc_state), - VMSTATE_UINT32(sac, stellaris_adc_state), - VMSTATE_UINT32(fifo[0].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[0].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[0], stellaris_adc_state), - VMSTATE_UINT32(ssctl[0], stellaris_adc_state), - VMSTATE_UINT32(fifo[1].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[1].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[1], stellaris_adc_state), - VMSTATE_UINT32(ssctl[1], stellaris_adc_state), - VMSTATE_UINT32(fifo[2].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[2].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[2], stellaris_adc_state), - VMSTATE_UINT32(ssctl[2], stellaris_adc_state), - VMSTATE_UINT32(fifo[3].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[3].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[3], stellaris_adc_state), - VMSTATE_UINT32(ssctl[3], stellaris_adc_state), - VMSTATE_UINT32(noise, stellaris_adc_state), + VMSTATE_UINT32(actss, StellarisADCState), + VMSTATE_UINT32(ris, StellarisADCState), + VMSTATE_UINT32(im, StellarisADCState), + VMSTATE_UINT32(emux, StellarisADCState), + VMSTATE_UINT32(ostat, StellarisADCState), + VMSTATE_UINT32(ustat, StellarisADCState), + VMSTATE_UINT32(sspri, StellarisADCState), + VMSTATE_UINT32(sac, StellarisADCState), + VMSTATE_UINT32(fifo[0].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[0].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[0], StellarisADCState), + VMSTATE_UINT32(ssctl[0], StellarisADCState), + VMSTATE_UINT32(fifo[1].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[1].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[1], StellarisADCState), + VMSTATE_UINT32(ssctl[1], StellarisADCState), + VMSTATE_UINT32(fifo[2].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[2].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[2], StellarisADCState), + VMSTATE_UINT32(ssctl[2], StellarisADCState), + VMSTATE_UINT32(fifo[3].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[3].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[3], StellarisADCState), + VMSTATE_UINT32(ssctl[3], StellarisADCState), + VMSTATE_UINT32(noise, StellarisADCState), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { static void stellaris_adc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - stellaris_adc_state *s = STELLARIS_ADC(obj); + StellarisADCState *s = STELLARIS_ADC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_class_init(ObjectClass *klass, void *data) static const TypeInfo stellaris_adc_info = { .name = TYPE_STELLARIS_ADC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(stellaris_adc_state), + .instance_size = sizeof(StellarisADCState), .instance_init = stellaris_adc_init, .class_init = stellaris_adc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The typedef and definitions are generated by the OBJECT_DECLARE_TYPE macro in "hw/arm/bcm2836.h": 20 #define TYPE_BCM283X "bcm283x" 21 OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X) The script ran in commit a489d1951c ("Use OBJECT_DECLARE_TYPE when possible") missed them because they are declared in a different file unit. Remove them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" -typedef struct BCM283XClass { +struct BCM283XClass { /*< private >*/ DeviceClass parent_class; /*< public >*/ @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; -} BCM283XClass; - -#define BCM283X_CLASS(klass) \ - OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) -#define BCM283X_GET_CLASS(obj) \ - OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) +}; static Property bcm2836_enabled_cores_property = DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/adc/npcm7xx_adc.h | 7 +++---- include/hw/arm/npcm7xx.h | 18 ++++++------------ include/hw/i2c/npcm7xx_smbus.h | 7 +++---- include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +++--- include/hw/misc/npcm7xx_mft.h | 7 +++---- include/hw/misc/npcm7xx_pwm.h | 3 +-- include/hw/misc/npcm7xx_rng.h | 6 +++--- include/hw/net/npcm7xx_emc.h | 5 +---- include/hw/sd/npcm7xx_sdhci.h | 4 ++-- 10 files changed, 26 insertions(+), 39 deletions(-) diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/adc/npcm7xx_adc.h +++ b/include/hw/adc/npcm7xx_adc.h @@ -XXX,XX +XXX,XX @@ * @iref: The internal reference voltage, initialized at launch time. * @rv: The calibrated output values of 0.5V and 1.5V for the ADC. */ -typedef struct { +struct NPCM7xxADCState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t iref; uint16_t calibration_r_values[NPCM7XX_ADC_NUM_CALIB]; -} NPCM7xxADCState; +}; #define TYPE_NPCM7XX_ADC "npcm7xx-adc" -#define NPCM7XX_ADC(obj) \ - OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxADCState, NPCM7XX_ADC) #endif /* NPCM7XX_ADC_H */ diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_NR_PWM_MODULES 2 -typedef struct NPCM7xxMachine { +struct NPCM7xxMachine { MachineState parent; /* * PWM fan splitter. each splitter connects to one PWM output and @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachine { */ SplitIRQ fan_splitter[NPCM7XX_NR_PWM_MODULES * NPCM7XX_PWM_PER_MODULE]; -} NPCM7xxMachine; +}; #define TYPE_NPCM7XX_MACHINE MACHINE_TYPE_NAME("npcm7xx") -#define NPCM7XX_MACHINE(obj) \ - OBJECT_CHECK(NPCM7xxMachine, (obj), TYPE_NPCM7XX_MACHINE) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMachine, NPCM7XX_MACHINE) typedef struct NPCM7xxMachineClass { MachineClass parent; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachineClass { #define NPCM7XX_MACHINE_GET_CLASS(obj) \ OBJECT_GET_CLASS(NPCM7xxMachineClass, (obj), TYPE_NPCM7XX_MACHINE) -typedef struct NPCM7xxState { +struct NPCM7xxState { DeviceState parent; ARMCPU cpu[NPCM7XX_MAX_NUM_CPUS]; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; -} NPCM7xxState; +}; #define TYPE_NPCM7XX "npcm7xx" -#define NPCM7XX(obj) OBJECT_CHECK(NPCM7xxState, (obj), TYPE_NPCM7XX) +OBJECT_DECLARE_TYPE(NPCM7xxState, NPCM7xxClass, NPCM7XX) #define TYPE_NPCM730 "npcm730" #define TYPE_NPCM750 "npcm750" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxClass { uint32_t num_cpus; } NPCM7xxClass; -#define NPCM7XX_CLASS(klass) \ - OBJECT_CLASS_CHECK(NPCM7xxClass, (klass), TYPE_NPCM7XX) -#define NPCM7XX_GET_CLASS(obj) \ - OBJECT_GET_CLASS(NPCM7xxClass, (obj), TYPE_NPCM7XX) - /** * npcm7xx_load_kernel - Loads memory with everything needed to boot * @machine - The machine containing the SoC to be booted. diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/npcm7xx_smbus.h +++ b/include/hw/i2c/npcm7xx_smbus.h @@ -XXX,XX +XXX,XX @@ typedef enum NPCM7xxSMBusStatus { * @rx_cur: The current position of rx_fifo. * @status: The current status of the SMBus. */ -typedef struct NPCM7xxSMBusState { +struct NPCM7xxSMBusState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSMBusState { uint8_t rx_cur; NPCM7xxSMBusStatus status; -} NPCM7xxSMBusState; +}; #define TYPE_NPCM7XX_SMBUS "npcm7xx-smbus" -#define NPCM7XX_SMBUS(obj) OBJECT_CHECK(NPCM7xxSMBusState, (obj), \ - TYPE_NPCM7XX_SMBUS) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxSMBusState, NPCM7XX_SMBUS) #endif /* NPCM7XX_SMBUS_H */ diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxCLKState { }; #define TYPE_NPCM7XX_CLK "npcm7xx-clk" -#define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxCLKState, NPCM7XX_CLK) #endif /* NPCM7XX_CLK_H */ diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm7xx_gcr.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_GCR_NR_REGS (0x148 / sizeof(uint32_t)) -typedef struct NPCM7xxGCRState { +struct NPCM7xxGCRState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxGCRState { uint32_t reset_pwron; uint32_t reset_mdlr; uint32_t reset_intcr3; -} NPCM7xxGCRState; +}; #define TYPE_NPCM7XX_GCR "npcm7xx-gcr" -#define NPCM7XX_GCR(obj) OBJECT_CHECK(NPCM7xxGCRState, (obj), TYPE_NPCM7XX_GCR) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxGCRState, NPCM7XX_GCR) #endif /* NPCM7XX_GCR_H */ diff --git a/include/hw/misc/npcm7xx_mft.h b/include/hw/misc/npcm7xx_mft.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_mft.h +++ b/include/hw/misc/npcm7xx_mft.h @@ -XXX,XX +XXX,XX @@ * @max_rpm: The maximum rpm for fans. Order: A0, B0, A1, B1. * @duty: The duty cycles for fans, relative to NPCM7XX_PWM_MAX_DUTY. */ -typedef struct NPCM7xxMFTState { +struct NPCM7xxMFTState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMFTState { uint32_t max_rpm[NPCM7XX_MFT_FANIN_COUNT]; uint32_t duty[NPCM7XX_MFT_FANIN_COUNT]; -} NPCM7xxMFTState; +}; #define TYPE_NPCM7XX_MFT "npcm7xx-mft" -#define NPCM7XX_MFT(obj) \ - OBJECT_CHECK(NPCM7xxMFTState, (obj), TYPE_NPCM7XX_MFT) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMFTState, NPCM7XX_MFT) #endif /* NPCM7XX_MFT_H */ diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_pwm.h +++ b/include/hw/misc/npcm7xx_pwm.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxPWMState { }; #define TYPE_NPCM7XX_PWM "npcm7xx-pwm" -#define NPCM7XX_PWM(obj) \ - OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxPWMState, NPCM7XX_PWM) #endif /* NPCM7XX_PWM_H */ diff --git a/include/hw/misc/npcm7xx_rng.h b/include/hw/misc/npcm7xx_rng.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_rng.h +++ b/include/hw/misc/npcm7xx_rng.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" -typedef struct NPCM7xxRNGState { +struct NPCM7xxRNGState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRNGState { uint8_t rngcs; uint8_t rngd; uint8_t rngmode; -} NPCM7xxRNGState; +}; #define TYPE_NPCM7XX_RNG "npcm7xx-rng" -#define NPCM7XX_RNG(obj) OBJECT_CHECK(NPCM7xxRNGState, (obj), TYPE_NPCM7XX_RNG) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxRNGState, NPCM7XX_RNG) #endif /* NPCM7XX_RNG_H */ diff --git a/include/hw/net/npcm7xx_emc.h b/include/hw/net/npcm7xx_emc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/npcm7xx_emc.h +++ b/include/hw/net/npcm7xx_emc.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxEMCState { bool rx_active; }; -typedef struct NPCM7xxEMCState NPCM7xxEMCState; - #define TYPE_NPCM7XX_EMC "npcm7xx-emc" -#define NPCM7XX_EMC(obj) \ - OBJECT_CHECK(NPCM7xxEMCState, (obj), TYPE_NPCM7XX_EMC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxEMCState, NPCM7XX_EMC) #endif /* NPCM7XX_EMC_H */ diff --git a/include/hw/sd/npcm7xx_sdhci.h b/include/hw/sd/npcm7xx_sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/npcm7xx_sdhci.h +++ b/include/hw/sd/npcm7xx_sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRegs { uint32_t boottoctrl; } NPCM7xxRegisters; -typedef struct NPCM7xxSDHCIState { +struct NPCM7xxSDHCIState { SysBusDevice parent; MemoryRegion container; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSDHCIState { NPCM7xxRegisters regs; SDHCIState sdhci; -} NPCM7xxSDHCIState; +}; #endif /* NPCM7XX_SDHCI_H */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The structure is named SECUREECState. Rename the type accordingly. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "sysemu/runstate.h" -typedef struct { +typedef struct SECUREECState { SysBusDevice parent_obj; MemoryRegion iomem; } SECUREECState; -#define TYPE_SBSA_EC "sbsa-ec" -#define SECURE_EC(obj) OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_EC) +#define TYPE_SBSA_SECURE_EC "sbsa-ec" +#define SBSA_SECURE_EC(obj) \ + OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, @@ -XXX,XX +XXX,XX @@ static uint64_t sbsa_ec_read(void *opaque, hwaddr offset, unsigned size) } static void sbsa_ec_write(void *opaque, hwaddr offset, - uint64_t value, unsigned size) + uint64_t value, unsigned size) { if (offset == 0) { /* PSCI machine power command register */ switch (value) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps sbsa_ec_ops = { static void sbsa_ec_init(Object *obj) { - SECUREECState *s = SECURE_EC(obj); + SECUREECState *s = SBSA_SECURE_EC(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); memory_region_init_io(&s->iomem, obj, &sbsa_ec_ops, s, "sbsa-ec", @@ -XXX,XX +XXX,XX @@ static void sbsa_ec_class_init(ObjectClass *klass, void *data) } static const TypeInfo sbsa_ec_info = { - .name = TYPE_SBSA_EC, + .name = TYPE_SBSA_SECURE_EC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(SECUREECState), .instance_init = sbsa_ec_init, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This model was merged few days before the QOM cleanup from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible") was pulled and merged. Manually adapt. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ typedef struct SECUREECState { } SECUREECState; #define TYPE_SBSA_SECURE_EC "sbsa-ec" -#define SBSA_SECURE_EC(obj) \ - OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) +OBJECT_DECLARE_SIMPLE_TYPE(SECUREECState, SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/intc/xilinx_intc.c:45:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/xilinx_intc.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/xilinx_intc.c +++ b/hw/intc/xilinx_intc.c @@ -XXX,XX +XXX,XX @@ #define R_MAX 8 #define TYPE_XILINX_INTC "xlnx.xps-intc" -DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, - TYPE_XILINX_INTC) +typedef struct XpsIntc XpsIntc; +DECLARE_INSTANCE_CHECKER(XpsIntc, XILINX_INTC, TYPE_XILINX_INTC) -struct xlx_pic +struct XpsIntc { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct xlx_pic uint32_t irq_pin_state; }; -static void update_irq(struct xlx_pic *p) +static void update_irq(XpsIntc *p) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void update_irq(struct xlx_pic *p) qemu_set_irq(p->parent_irq, (p->regs[R_MER] & 1) && p->regs[R_IPR]); } -static uint64_t -pic_read(void *opaque, hwaddr addr, unsigned int size) +static uint64_t pic_read(void *opaque, hwaddr addr, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t r = 0; addr >>= 2; @@ -XXX,XX +XXX,XX @@ pic_read(void *opaque, hwaddr addr, unsigned int size) return r; } -static void -pic_write(void *opaque, hwaddr addr, - uint64_t val64, unsigned int size) +static void pic_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t value = val64; addr >>= 2; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps pic_ops = { static void irq_handler(void *opaque, int irq, int level) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; /* edge triggered interrupt */ if (p->c_kind_of_intr & (1 << irq) && p->regs[R_MER] & 2) { @@ -XXX,XX +XXX,XX @@ static void irq_handler(void *opaque, int irq, int level) static void xilinx_intc_init(Object *obj) { - struct xlx_pic *p = XILINX_INTC(obj); + XpsIntc *p = XILINX_INTC(obj); qdev_init_gpio_in(DEVICE(obj), irq_handler, 32); sysbus_init_irq(SYS_BUS_DEVICE(obj), &p->parent_irq); @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_init(Object *obj) } static Property xilinx_intc_properties[] = { - DEFINE_PROP_UINT32("kind-of-intr", struct xlx_pic, c_kind_of_intr, 0), + DEFINE_PROP_UINT32("kind-of-intr", XpsIntc, c_kind_of_intr, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_intc_info = { .name = TYPE_XILINX_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct xlx_pic), + .instance_size = sizeof(XpsIntc), .instance_init = xilinx_intc_init, .class_init = xilinx_intc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/timer/xilinx_timer.c:65:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-15-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/xilinx_timer.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xilinx_timer.c +++ b/hw/timer/xilinx_timer.c @@ -XXX,XX +XXX,XX @@ struct xlx_timer }; #define TYPE_XILINX_TIMER "xlnx.xps-timer" -DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, - TYPE_XILINX_TIMER) +typedef struct XpsTimerState XpsTimerState; +DECLARE_INSTANCE_CHECKER(XpsTimerState, XILINX_TIMER, TYPE_XILINX_TIMER) -struct timerblock +struct XpsTimerState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct timerblock struct xlx_timer *timers; }; -static inline unsigned int num_timers(struct timerblock *t) +static inline unsigned int num_timers(XpsTimerState *t) { return 2 - t->one_timer_only; } @@ -XXX,XX +XXX,XX @@ static inline unsigned int timer_from_addr(hwaddr addr) return addr >> 2; } -static void timer_update_irq(struct timerblock *t) +static void timer_update_irq(XpsTimerState *t) { unsigned int i, irq = 0; uint32_t csr; @@ -XXX,XX +XXX,XX @@ static void timer_update_irq(struct timerblock *t) static uint64_t timer_read(void *opaque, hwaddr addr, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; uint32_t r = 0; unsigned int timer; @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, uint64_t val64, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; unsigned int timer; uint32_t value = val64; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps timer_ops = { static void timer_hit(void *opaque) { struct xlx_timer *xt = opaque; - struct timerblock *t = xt->parent; + XpsTimerState *t = xt->parent; D(fprintf(stderr, "%s %d\n", __func__, xt->nr)); xt->regs[R_TCSR] |= TCSR_TINT; @@ -XXX,XX +XXX,XX @@ static void timer_hit(void *opaque) static void xilinx_timer_realize(DeviceState *dev, Error **errp) { - struct timerblock *t = XILINX_TIMER(dev); + XpsTimerState *t = XILINX_TIMER(dev); unsigned int i; /* Init all the ptimers. */ @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_realize(DeviceState *dev, Error **errp) static void xilinx_timer_init(Object *obj) { - struct timerblock *t = XILINX_TIMER(obj); + XpsTimerState *t = XILINX_TIMER(obj); /* All timers share a single irq line. */ sysbus_init_irq(SYS_BUS_DEVICE(obj), &t->irq); } static Property xilinx_timer_properties[] = { - DEFINE_PROP_UINT32("clock-frequency", struct timerblock, freq_hz, - 62 * 1000000), - DEFINE_PROP_UINT8("one-timer-only", struct timerblock, one_timer_only, 0), + DEFINE_PROP_UINT32("clock-frequency", XpsTimerState, freq_hz, 62 * 1000000), + DEFINE_PROP_UINT8("one-timer-only", XpsTimerState, one_timer_only, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_timer_info = { .name = TYPE_XILINX_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct timerblock), + .instance_size = sizeof(XpsTimerState), .instance_init = xilinx_timer_init, .class_init = xilinx_timer_class_init, }; -- 2.34.1 From: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3 write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is enabled and exposed to the guest. As a result EL3 writes of that bit are ignored. Cc: qemu-stable@nongnu.org Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_sme, cpu)) { valid_mask |= SCR_ENTP2; } + if (cpu_isar_feature(aa64_hcx, cpu)) { + valid_mask |= SCR_HXEN; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { -- 2.34.1 The following changes since commit 003ba52a8b327180e284630b289c6ece5a3e08b9: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-02-16 11:16:39 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230216 for you to fetch changes up to caf01d6a435d9f4a95aeae2f9fc6cb8b889b1fb8: tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG (2023-02-16 16:28:53 +0000) ---------------------------------------------------------------- target-arm queue: * Some mostly M-profile-related code cleanups * avocado: Retire the boot_linux.py AArch64 TCG tests * hw/arm/smmuv3: Add GBPA register * arm/virt: don't try to spell out the accelerator * hw/arm: Attach PSPI module to NPCM7XX SoC * Some cleanup/refactoring patches aiming towards allowing building Arm targets without CONFIG_TCG ---------------------------------------------------------------- Alex Bennée (1): tests/avocado: retire the Aarch64 TCG tests from boot_linux.py Claudio Fontana (3): target/arm: rename handle_semihosting to tcg_handle_semihosting target/arm: wrap psci call with tcg_enabled target/arm: wrap call to aarch64_sve_change_el in tcg_enabled() Cornelia Huck (1): arm/virt: don't try to spell out the accelerator Fabiano Rosas (7): target/arm: Move PC alignment check target/arm: Move cpregs code out of cpu.h tests/avocado: Skip tests that require a missing accelerator tests/avocado: Tag TCG tests with accel:tcg target/arm: Use "max" as default cpu for the virt machine with KVM tests/qtest: arm-cpu-features: Match tests to required accelerators tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG Hao Wu (3): MAINTAINERS: Add myself to maintainers and remove Havard hw/ssi: Add Nuvoton PSPI Module hw/arm: Attach PSPI module to NPCM7XX SoC Jean-Philippe Brucker (2): hw/arm/smmu-common: Support 64-bit addresses hw/arm/smmu-common: Fix TTB1 handling Mostafa Saleh (1): hw/arm/smmuv3: Add GBPA register Philippe Mathieu-Daudé (12): hw/intc/armv7m_nvic: Use OBJECT_DECLARE_SIMPLE_TYPE() macro target/arm: Simplify arm_v7m_mmu_idx_for_secstate() for user emulation target/arm: Reduce arm_v7m_mmu_idx_[all/for_secstate_and_priv]() scope target/arm: Constify ID_PFR1 on user emulation target/arm: Convert CPUARMState::eabi to boolean target/arm: Avoid resetting CPUARMState::eabi field target/arm: Restrict CPUARMState::gicv3state to sysemu target/arm: Restrict CPUARMState::arm_boot_info to sysemu target/arm: Restrict CPUARMState::nvic to sysemu target/arm: Store CPUARMState::nvic as NVICState* target/arm: Declare CPU <-> NVIC helpers in 'hw/intc/armv7m_nvic.h' hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependency MAINTAINERS | 8 +- docs/system/arm/nuvoton.rst | 2 +- hw/arm/smmuv3-internal.h | 7 + include/hw/arm/npcm7xx.h | 2 + include/hw/arm/smmu-common.h | 2 - include/hw/arm/smmuv3.h | 1 + include/hw/intc/armv7m_nvic.h | 128 +++++++++++++++++- include/hw/ssi/npcm_pspi.h | 53 ++++++++ linux-user/user-internals.h | 2 +- target/arm/cpregs.h | 98 ++++++++++++++ target/arm/cpu.h | 228 ++------------------------------- target/arm/internals.h | 14 -- hw/arm/npcm7xx.c | 25 +++- hw/arm/smmu-common.c | 4 +- hw/arm/smmuv3.c | 43 ++++++- hw/arm/virt.c | 10 +- hw/intc/armv7m_nvic.c | 38 ++---- hw/ssi/npcm_pspi.c | 221 ++++++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 4 +- target/arm/cpu.c | 5 +- target/arm/cpu_tcg.c | 3 + target/arm/helper.c | 31 +++-- target/arm/m_helper.c | 86 +++++++------ target/arm/machine.c | 18 +-- tests/qtest/arm-cpu-features.c | 28 ++-- hw/arm/Kconfig | 1 + hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + tests/avocado/avocado_qemu/__init__.py | 4 + tests/avocado/boot_linux.py | 48 ++----- tests/avocado/boot_linux_console.py | 1 + tests/avocado/machine_aarch64_virt.py | 63 ++++++++- tests/avocado/reverse_debugging.py | 8 ++ tests/qtest/meson.build | 4 +- 34 files changed, 798 insertions(+), 399 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro, similarly to automatic conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_NVIC "armv7m_nvic" - -typedef struct NVICState NVICState; -DECLARE_INSTANCE_CHECKER(NVICState, NVIC, - TYPE_NVIC) +OBJECT_DECLARE_SIMPLE_TYPE(NVICState, NVIC) /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return 0; } -#else +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + return ARMMMUIdx_MUser; +} + +#else /* !CONFIG_USER_ONLY */ /* * What kind of stack write are we doing? This affects how exceptions @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -#endif /* !CONFIG_USER_ONLY */ - ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, bool secstate, bool priv, bool negpri) { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } + +#endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv() are only used for system emulation in m_helper.c. Move the definitions to avoid prototype forward declarations. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 14 -------- target/arm/m_helper.c | 74 +++++++++++++++++++++--------------------- 2 files changed, 37 insertions(+), 51 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); -/* - * Return the MMU index for a v7M CPU with all relevant information - * manually specified. - */ -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri); - -/* - * Return the MMU index for a v7M CPU in the specified security and - * privilege state. - */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv); - /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) #else /* !CONFIG_USER_ONLY */ +static ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) +{ + ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; + + if (priv) { + mmu_idx |= ARM_MMU_IDX_M_PRIV; + } + + if (negpri) { + mmu_idx |= ARM_MMU_IDX_M_NEGPRI; + } + + if (secstate) { + mmu_idx |= ARM_MMU_IDX_M_S; + } + + return mmu_idx; +} + +static ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + +/* Return the MMU index for a v7M CPU in the specified security state */ +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + bool priv = arm_v7m_is_handler_mode(env) || + !(env->v7m.control[secstate] & 1); + + return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); +} + /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri) -{ - ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; - - if (priv) { - mmu_idx |= ARM_MMU_IDX_M_PRIV; - } - - if (negpri) { - mmu_idx |= ARM_MMU_IDX_M_NEGPRI; - } - - if (secstate) { - mmu_idx |= ARM_MMU_IDX_M_S; - } - - return mmu_idx; -} - -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) -{ - bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); - - return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); -} - -/* Return the MMU index for a v7M CPU in the specified security state */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) -{ - bool priv = arm_v7m_is_handler_mode(env) || - !(env->v7m.control[secstate] & 1); - - return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); -} - #endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } +#ifndef CONFIG_USER_ONLY /* * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. @@ -XXX,XX +XXX,XX @@ static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) return pfr1; } -#ifndef CONFIG_USER_ONLY static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, .access = PL1_R, .type = ARM_CP_NO_RAW, .accessfn = access_aa32_tid3, +#ifdef CONFIG_USER_ONLY + .type = ARM_CP_CONST, + .resetvalue = cpu->isar.id_pfr1, +#else + .type = ARM_CP_NO_RAW, + .accessfn = access_aa32_tid3, .readfn = id_pfr1_read, - .writefn = arm_cp_write_ignore }, + .writefn = arm_cp_write_ignore +#endif + }, { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/user-internals.h | 2 +- target/arm/cpu.h | 2 +- linux-user/arm/cpu_loop.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/user-internals.h b/linux-user/user-internals.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/user-internals.h +++ b/linux-user/user-internals.h @@ -XXX,XX +XXX,XX @@ void print_termios(void *arg); #ifdef TARGET_ARM static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { - return cpu_env->eabi == 1; + return cpu_env->eabi; } #elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32) static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; } diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { #if defined(CONFIG_USER_ONLY) /* For usermode syscall translation. */ - int eabi; + bool eabi; #endif struct CPUBreakpoint *cpu_breakpoint[16]; diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_SWI: { - env->eabi = 1; + env->eabi = true; /* system call */ if (env->thumb) { /* Thumb is always EABI style with syscall number in r7 */ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) * > 0xfffff and are handled below as out-of-range. */ n ^= ARM_SYSCALL_BASE; - env->eabi = 0; + env->eabi = false; } } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Although the 'eabi' field is only used in user emulation where CPU reset doesn't occur, it doesn't belong to the area to reset. Move it after the 'end_reset_fields' for consistency. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMVectorReg zarray[ARM_MAX_VQ * 16]; #endif -#if defined(CONFIG_USER_ONLY) - /* For usermode syscall translation. */ - bool eabi; -#endif - struct CPUBreakpoint *cpu_breakpoint[16]; struct CPUWatchpoint *cpu_watchpoint[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; +#if defined(CONFIG_USER_ONLY) + /* For usermode syscall translation. */ + bool eabi; +#endif /* CONFIG_USER_ONLY */ #ifdef TARGET_TAGGED_ADDRESSES /* Linux syscall tagged address support */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { void *nvic; const struct arm_boot_info *boot_info; +#if !defined(CONFIG_USER_ONLY) /* Store GICv3CPUState to access from this struct */ void *gicv3state; -#if defined(CONFIG_USER_ONLY) +#else /* CONFIG_USER_ONLY */ /* For usermode syscall translation. */ bool eabi; #endif /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; void *nvic; - const struct arm_boot_info *boot_info; #if !defined(CONFIG_USER_ONLY) + const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; #else /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint32_t ctrl; } sau; - void *nvic; #if !defined(CONFIG_USER_ONLY) + void *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> There is no point in using a void pointer to access the NVIC. Use the real type to avoid casting it while debugging. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 46 ++++++++++++++++++++++--------------------- hw/intc/armv7m_nvic.c | 38 ++++++++++++----------------------- target/arm/cpu.c | 1 + target/arm/m_helper.c | 2 +- 4 files changed, 39 insertions(+), 48 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMTBFlags { typedef struct ARMMMUFaultInfo ARMMMUFaultInfo; +typedef struct NVICState NVICState; + typedef struct CPUArchState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; #if !defined(CONFIG_USER_ONLY) - void *nvic; + NVICState *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, /* Interface between CPU and Interrupt controller. */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(void *opaque); +bool armv7m_nvic_can_take_pending_exception(NVICState *s); #else -static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) { return true; } #endif /** * armv7m_nvic_set_pending: mark the specified exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * exceptions (exceptions generated in the course of trying to take * a different exception). */ -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Similar to armv7m_nvic_set_pending(), but specifically for exceptions * generated in the course of lazy stacking of FP registers. */ -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state - * @opaque: the NVIC + * @s: the NVIC * @pirq: set to pending exception number * @ptargets_secure: set to whether pending exception targets Secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); * to true if the current highest priority pending exception should * be taken to Secure state, false for NS. */ -void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @opaque: the NVIC + * @s: the NVIC * * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. */ -void armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(NVICState *s); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to complete * @secure: true if this exception was secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); * interrupt the current execution priority. This controls whether the * RDY bit for it in the FPCCR is set. */ -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @opaque: the NVIC + * @s: the NVIC * * Returns: the raw execution priority as defined by the v8M architecture. * This is the execution priority minus the effects of AIRCR.PRIS, * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. * (v8M ARM ARM I_PKLD.) */ -int armv7m_nvic_raw_execution_priority(void *opaque); +int armv7m_nvic_raw_execution_priority(NVICState *s); /** * armv7m_nvic_neg_prio_requested: return true if the requested execution * priority is negative for the specified security state. - * @opaque: the NVIC + * @s: the NVIC * @secure: the security state to test * This corresponds to the pseudocode IsReqExecPriNeg(). */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); #else -static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { return false; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { /* Return true if the requested execution priority is negative * for the specified security state, ie that security state @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) * mean we don't allow FAULTMASK_NS to actually make the execution * priority negative). Compare pseudocode IsReqExcPriNeg(). */ - NVICState *s = opaque; - if (s->cpu->env.v7m.faultmask[secure]) { return true; } @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) return false; } -bool armv7m_nvic_can_take_pending_exception(void *opaque) +bool armv7m_nvic_can_take_pending_exception(NVICState *s) { - NVICState *s = opaque; - return nvic_exec_prio(s) > nvic_pending_prio(s); } -int armv7m_nvic_raw_execution_priority(void *opaque) +int armv7m_nvic_raw_execution_priority(NVICState *s) { - NVICState *s = opaque; - return s->exception_prio; } @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) +static void armv7m_nvic_clear_pending(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); @@ -XXX,XX +XXX,XX @@ static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, false); + do_armv7m_nvic_set_pending(s, irq, secure, false); } -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, true); + do_armv7m_nvic_set_pending(s, irq, secure, true); } -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure) { /* * Pend an exception during lazy FP stacking. This differs @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) * whether we should escalate depends on the saved context * in the FPCCR register, not on the current state of the CPU/NVIC. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(NVICState *s) { - NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); @@ -XXX,XX +XXX,XX @@ static bool vectpending_targets_secure(NVICState *s) exc_targets_secure(s, s->vectpending); } -void armv7m_nvic_get_pending_irq_info(void *opaque, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure) { - NVICState *s = (NVICState *)opaque; const int pending = s->vectpending; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_get_pending_irq_info(void *opaque, *pirq = pending; } -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; int ret = 0; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure) { /* * Return whether an exception is "ready", i.e. it is enabled and is @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) * for non-banked exceptions secure is always false; for banked exceptions * it indicates which of the exceptions is required. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; int running = nvic_exec_prio(s); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#include "hw/intc/armv7m_nvic.h" #endif #include "sysemu/tcg.h" #include "sysemu/qtest.h" diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, * that we will need later in order to do lazy FP reg stacking. */ bool is_secure = env->v7m.secure; - void *nvic = env->nvic; + NVICState *nvic = env->nvic; /* * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits * are banked and we want to update the bit in the bank for the -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> While dozens of files include "cpu.h", only 3 files require these NVIC helper declarations. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 123 ++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 123 ---------------------------------- target/arm/cpu.c | 4 +- target/arm/cpu_tcg.c | 3 + target/arm/m_helper.c | 3 + 5 files changed, 132 insertions(+), 124 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { qemu_irq sysresetreq; }; +/* Interface between CPU and Interrupt controller. */ +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @s: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, + bool *ptargets_secure); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @s: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + */ +void armv7m_nvic_acknowledge_irq(NVICState *s); +/** + * armv7m_nvic_complete_irq: complete specified interrupt or exception + * @s: the NVIC + * @irq: the exception number to complete + * @secure: true if this exception was secure + * + * Returns: -1 if the irq was not active + * 1 if completing this irq brought us back to base (no active irqs) + * 0 if there is still an irq active after this one was completed + * (Ignoring -1, this is the same as the RETTOBASE value before completion.) + */ +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_raw_execution_priority: return the raw execution priority + * @s: the NVIC + * + * Returns: the raw execution priority as defined by the v8M architecture. + * This is the execution priority minus the effects of AIRCR.PRIS, + * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. + * (v8M ARM ARM I_PKLD.) + */ +int armv7m_nvic_raw_execution_priority(NVICState *s); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @s: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) +{ + return false; +} +#endif +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_can_take_pending_exception(NVICState *s); +#else +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) +{ + return true; +} +#endif + #endif diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface between CPU and Interrupt controller. */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(NVICState *s); -#else -static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) -{ - return true; -} -#endif -/** - * armv7m_nvic_set_pending: mark the specified exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Marks the specified exception as pending. Note that we will assert() - * if @secure is true and @irq does not specify one of the fixed set - * of architecturally banked exceptions. - */ -void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for derived - * exceptions (exceptions generated in the course of trying to take - * a different exception). - */ -void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for exceptions - * generated in the course of lazy stacking of FP registers. - */ -void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_pending_irq_info: return highest priority pending - * exception, and whether it targets Secure state - * @s: the NVIC - * @pirq: set to pending exception number - * @ptargets_secure: set to whether pending exception targets Secure - * - * This function writes the number of the highest priority pending - * exception (the one which would be made active by - * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure - * to true if the current highest priority pending exception should - * be taken to Secure state, false for NS. - */ -void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, - bool *ptargets_secure); -/** - * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @s: the NVIC - * - * Move the current highest priority pending exception from the pending - * state to the active state, and update v7m.exception to indicate that - * it is the exception currently being handled. - */ -void armv7m_nvic_acknowledge_irq(NVICState *s); -/** - * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @s: the NVIC - * @irq: the exception number to complete - * @secure: true if this exception was secure - * - * Returns: -1 if the irq was not active - * 1 if completing this irq brought us back to base (no active irqs) - * 0 if there is still an irq active after this one was completed - * (Ignoring -1, this is the same as the RETTOBASE value before completion.) - */ -int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Return whether an exception is "ready", i.e. whether the exception is - * enabled and is configured at a priority which would allow it to - * interrupt the current execution priority. This controls whether the - * RDY bit for it in the FPCCR is set. - */ -bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @s: the NVIC - * - * Returns: the raw execution priority as defined by the v8M architecture. - * This is the execution priority minus the effects of AIRCR.PRIS, - * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. - * (v8M ARM ARM I_PKLD.) - */ -int armv7m_nvic_raw_execution_priority(NVICState *s); -/** - * armv7m_nvic_neg_prio_requested: return true if the requested execution - * priority is negative for the specified security state. - * @s: the NVIC - * @secure: the security state to test - * This corresponds to the pseudocode IsReqExecPriNeg(). - */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); -#else -static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) -{ - return false; -} -#endif - /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs * which are passed to define_arm_cp_regs(). diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#ifdef CONFIG_TCG #include "hw/intc/armv7m_nvic.h" -#endif +#endif /* CONFIG_TCG */ +#endif /* !CONFIG_USER_ONLY */ #include "sysemu/tcg.h" #include "sysemu/qtest.h" #include "sysemu/hw_accel.h" diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #endif #include "cpregs.h" +#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) +#include "hw/intc/armv7m_nvic.h" +#endif /* Share AArch32 -cpu max features with AArch64. */ diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif +#if !defined(CONFIG_USER_ONLY) +#include "hw/intc/armv7m_nvic.h" +#endif static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask, uint32_t reg, uint32_t val) -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> The two TCG tests for GICv2 and GICv3 are very heavy weight distros that take a long time to boot up, especially for an --enable-debug build. The total code coverage they give is: Overall coverage rate: lines......: 11.2% (59584 of 530123 lines) functions..: 15.0% (7436 of 49443 functions) branches...: 6.3% (19273 of 303933 branches) We already get pretty close to that with the machine_aarch64_virt tests which only does one full boot (~120s vs ~600s) of alpine. We expand the kernel+initrd boot (~8s) to test both GICs and also add an RNG device and a block device to generate a few IRQs and exercise the storage layer. With that we get to a coverage of: Overall coverage rate: lines......: 11.0% (58121 of 530123 lines) functions..: 14.9% (7343 of 49443 functions) branches...: 6.0% (18269 of 303933 branches) which I feel is close enough given the massive time saving. If we want to target any more sub-systems we can use lighter weight more directed tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux.py | 48 ++++---------------- tests/avocado/machine_aarch64_virt.py | 63 ++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 46 deletions(-) diff --git a/tests/avocado/boot_linux.py b/tests/avocado/boot_linux.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux.py +++ b/tests/avocado/boot_linux.py @@ -XXX,XX +XXX,XX @@ def test_pc_q35_kvm(self): self.launch_and_wait(set_up_ssh_connection=False) -# For Aarch64 we only boot KVM tests in CI as the TCG tests are very -# heavyweight. There are lighter weight distros which we use in the -# machine_aarch64_virt.py tests. +# For Aarch64 we only boot KVM tests in CI as booting the current +# Fedora OS in TCG tests is very heavyweight. There are lighter weight +# distros which we use in the machine_aarch64_virt.py tests. class BootLinuxAarch64(LinuxTest): """ :avocado: tags=arch:aarch64 :avocado: tags=machine:virt - :avocado: tags=machine:gic-version=2 """ timeout = 720 - def add_common_args(self): - self.vm.add_args('-bios', - os.path.join(BUILD_DIR, 'pc-bios', - 'edk2-aarch64-code.fd')) - self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') - self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv2(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv2 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=2") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv3(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv3 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=3") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - def test_virt_kvm(self): """ :avocado: tags=accel:kvm @@ -XXX,XX +XXX,XX @@ def test_virt_kvm(self): self.require_accelerator("kvm") self.vm.add_args("-accel", "kvm") self.vm.add_args("-machine", "virt,gic-version=host") - self.add_common_args() + self.vm.add_args('-bios', + os.path.join(BUILD_DIR, 'pc-bios', + 'edk2-aarch64-code.fd')) + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') self.launch_and_wait(set_up_ssh_connection=False) diff --git a/tests/avocado/machine_aarch64_virt.py b/tests/avocado/machine_aarch64_virt.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aarch64_virt.py +++ b/tests/avocado/machine_aarch64_virt.py @@ -XXX,XX +XXX,XX @@ import time import os +import logging from avocado_qemu import QemuSystemTest from avocado_qemu import wait_for_console_pattern from avocado_qemu import exec_command from avocado_qemu import BUILD_DIR +from avocado.utils import process +from avocado.utils.path import find_command class Aarch64VirtMachine(QemuSystemTest): KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 ' @@ -XXX,XX +XXX,XX @@ def test_alpine_virt_tcg_gic_max(self): self.wait_for_console_pattern('Welcome to Alpine Linux 3.16') - def test_aarch64_virt(self): + def common_aarch64_virt(self, machine): """ - :avocado: tags=arch:aarch64 - :avocado: tags=machine:virt - :avocado: tags=accel:tcg - :avocado: tags=cpu:max + Common code to launch basic virt machine with kernel+initrd + and a scratch disk. """ + logger = logging.getLogger('aarch64_virt') + kernel_url = ('https://fileserver.linaro.org/s/' 'z6B2ARM7DQT3HWN/download') - kernel_hash = 'ed11daab50c151dde0e1e9c9cb8b2d9bd3215347' kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) @@ -XXX,XX +XXX,XX @@ def test_aarch64_virt(self): 'console=ttyAMA0') self.require_accelerator("tcg") self.vm.add_args('-cpu', 'max,pauth-impdef=on', + '-machine', machine, '-accel', 'tcg', '-kernel', kernel_path, '-append', kernel_command_line) + + # A RNG offers an easy way to generate a few IRQs + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', + 'rng-random,id=rng0,filename=/dev/urandom') + + # Also add a scratch block device + logger.info('creating scratch qcow2 image') + image_path = os.path.join(self.workdir, 'scratch.qcow2') + qemu_img = os.path.join(BUILD_DIR, 'qemu-img') + if not os.path.exists(qemu_img): + qemu_img = find_command('qemu-img', False) + if qemu_img is False: + self.cancel('Could not find "qemu-img", which is required to ' + 'create the temporary qcow2 image') + cmd = '%s create -f qcow2 %s 8M' % (qemu_img, image_path) + process.run(cmd) + + # Add the device + self.vm.add_args('-blockdev', + f"driver=qcow2,file.driver=file,file.filename={image_path},node-name=scratch") + self.vm.add_args('-device', + 'virtio-blk-device,drive=scratch') + self.vm.launch() self.wait_for_console_pattern('Welcome to Buildroot') time.sleep(0.1) exec_command(self, 'root') time.sleep(0.1) + exec_command(self, 'dd if=/dev/hwrng of=/dev/vda bs=512 count=4') + time.sleep(0.1) + exec_command(self, 'md5sum /dev/vda') + time.sleep(0.1) + exec_command(self, 'cat /proc/interrupts') + time.sleep(0.1) exec_command(self, 'cat /proc/self/maps') time.sleep(0.1) + + def test_aarch64_virt_gicv3(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic_version=3") + + def test_aarch64_virt_gicv2(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic-version=2") -- 2.34.1 From: Mostafa Saleh <smostafa@google.com> GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 7 +++++++ include/hw/arm/smmuv3.h | 1 + hw/arm/smmuv3.c | 43 +++++++++++++++++++++++++++++++++++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(CR0ACK, 0x24) REG32(CR1, 0x28) REG32(CR2, 0x2c) REG32(STATUSR, 0x40) +REG32(GBPA, 0x44) + FIELD(GBPA, ABORT, 20, 1) + FIELD(GBPA, UPDATE, 31, 1) + +/* Use incoming. */ +#define SMMU_GBPA_RESET_VAL 0x1000 + REG32(IRQ_CTRL, 0x50) FIELD(IRQ_CTRL, GERROR_IRQEN, 0, 1) FIELD(IRQ_CTRL, PRI_IRQEN, 1, 1) diff --git a/include/hw/arm/smmuv3.h b/include/hw/arm/smmuv3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmuv3.h +++ b/include/hw/arm/smmuv3.h @@ -XXX,XX +XXX,XX @@ struct SMMUv3State { uint32_t cr[3]; uint32_t cr0ack; uint32_t statusr; + uint32_t gbpa; uint32_t irq_ctrl; uint32_t gerror; uint32_t gerrorn; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->gerror = 0; s->gerrorn = 0; s->statusr = 0; + s->gbpa = SMMU_GBPA_RESET_VAL; } static int smmu_get_ste(SMMUv3State *s, dma_addr_t addr, STE *buf, @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr addr, qemu_mutex_lock(&s->mutex); if (!smmu_enabled(s)) { - status = SMMU_TRANS_DISABLE; + if (FIELD_EX32(s->gbpa, GBPA, ABORT)) { + status = SMMU_TRANS_ABORT; + } else { + status = SMMU_TRANS_DISABLE; + } goto epilogue; } @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr offset, case A_GERROR_IRQ_CFG2: s->gerror_irq_cfg2 = data; return MEMTX_OK; + case A_GBPA: + /* + * If UPDATE is not set, the write is ignored. This is the only + * permitted behavior in SMMUv3.2 and later. + */ + if (data & R_GBPA_UPDATE_MASK) { + /* Ignore update bit as write is synchronous. */ + s->gbpa = data & ~R_GBPA_UPDATE_MASK; + } + return MEMTX_OK; case A_STRTAB_BASE: /* 64b */ s->strtab_base = deposit64(s->strtab_base, 0, 32, data); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_readl(SMMUv3State *s, hwaddr offset, case A_STATUSR: *data = s->statusr; return MEMTX_OK; + case A_GBPA: + *data = s->gbpa; + return MEMTX_OK; case A_IRQ_CTRL: case A_IRQ_CTRL_ACK: *data = s->irq_ctrl; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3_queue = { }, }; +static bool smmuv3_gbpa_needed(void *opaque) +{ + SMMUv3State *s = opaque; + + /* Only migrate GBPA if it has different reset value. */ + return s->gbpa != SMMU_GBPA_RESET_VAL; +} + +static const VMStateDescription vmstate_gbpa = { + .name = "smmuv3/gbpa", + .version_id = 1, + .minimum_version_id = 1, + .needed = smmuv3_gbpa_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gbpa, SMMUv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { VMSTATE_END_OF_LIST(), }, + .subsections = (const VMStateDescription * []) { + &vmstate_gbpa, + NULL + } }; static void smmuv3_instance_init(Object *obj) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config XLNX_ZYNQMP_ARM select XLNX_CSU_DMA select XLNX_ZYNQMP select XLNX_ZDMA + select USB_DWC3 config XLNX_VERSAL bool -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (vms->secure && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Security extensions (TrustZone) to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->mte && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "MTE to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Havard is no longer working on the Nuvoton systems for a while and won't be able to do any work on it in the future. So I'll take over maintaining the Nuvoton system from him. Signed-off-by: Hao Wu <wuhaotsh@google.com> Acked-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/net/mv88w8618_eth.h F: docs/system/arm/musicpal.rst Nuvoton NPCM7xx -M: Havard Skinnemoen <hskinnemoen@google.com> M: Tyrone Ting <kfting@nuvoton.com> +M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Nuvoton's PSPI is a general purpose SPI module which enables connections to SPI-based peripheral devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 6 +- include/hw/ssi/npcm_pspi.h | 53 +++++++++ hw/ssi/npcm_pspi.c | 221 +++++++++++++++++++++++++++++++++++++ hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + 5 files changed, 283 insertions(+), 4 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Tyrone Ting <kfting@nuvoton.com> M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported -F: hw/*/npcm7xx* -F: include/hw/*/npcm7xx* -F: tests/qtest/npcm7xx* +F: hw/*/npcm* +F: include/hw/*/npcm* +F: tests/qtest/npcm* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom F: docs/system/arm/nuvoton.rst diff --git a/include/hw/ssi/npcm_pspi.h b/include/hw/ssi/npcm_pspi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/npcm_pspi.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton Peripheral SPI Module + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM_PSPI_H +#define NPCM_PSPI_H + +#include "hw/ssi/ssi.h" +#include "hw/sysbus.h" + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM_PSPI_NR_REGS 3 + +/** + * NPCMPSPIState - Device state for one Flash Interface Unit. + * @parent: System bus device. + * @mmio: Memory region for register access. + * @spi: The SPI bus mastered by this controller. + * @regs: Register contents. + * @irq: The interrupt request queue for this module. + * + * Each PSPI has a shared bank of registers, and controls up to four chip + * selects. Each chip select has a dedicated memory region which may be used to + * read and write the flash connected to that chip select as if it were memory. + */ +typedef struct NPCMPSPIState { + SysBusDevice parent; + + MemoryRegion mmio; + + SSIBus *spi; + uint16_t regs[NPCM_PSPI_NR_REGS]; + qemu_irq irq; +} NPCMPSPIState; + +#define TYPE_NPCM_PSPI "npcm-pspi" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMPSPIState, NPCM_PSPI) + +#endif /* NPCM_PSPI_H */ diff --git a/hw/ssi/npcm_pspi.c b/hw/ssi/npcm_pspi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/npcm_pspi.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM Peripheral SPI Module (PSPI) + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/irq.h" +#include "hw/registerfields.h" +#include "hw/ssi/npcm_pspi.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +REG16(PSPI_DATA, 0x0) +REG16(PSPI_CTL1, 0x2) + FIELD(PSPI_CTL1, SPIEN, 0, 1) + FIELD(PSPI_CTL1, MOD, 2, 1) + FIELD(PSPI_CTL1, EIR, 5, 1) + FIELD(PSPI_CTL1, EIW, 6, 1) + FIELD(PSPI_CTL1, SCM, 7, 1) + FIELD(PSPI_CTL1, SCIDL, 8, 1) + FIELD(PSPI_CTL1, SCDV, 9, 7) +REG16(PSPI_STAT, 0x4) + FIELD(PSPI_STAT, BSY, 0, 1) + FIELD(PSPI_STAT, RBF, 1, 1) + +static void npcm_pspi_update_irq(NPCMPSPIState *s) +{ + int level = 0; + + /* Only fire IRQ when the module is enabled. */ + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, SPIEN)) { + /* Update interrupt as BSY is cleared. */ + if ((!FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, BSY)) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIW)) { + level = 1; + } + + /* Update interrupt as RBF is set. */ + if (FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, RBF) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIR)) { + level = 1; + } + } + qemu_set_irq(s->irq, level); +} + +static uint16_t npcm_pspi_read_data(NPCMPSPIState *s) +{ + uint16_t value = s->regs[R_PSPI_DATA]; + + /* Clear stat bits as the value are read out. */ + s->regs[R_PSPI_STAT] = 0; + + return value; +} + +static void npcm_pspi_write_data(NPCMPSPIState *s, uint16_t data) +{ + uint16_t value = 0; + + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, MOD)) { + value = ssi_transfer(s->spi, extract16(data, 8, 8)) << 8; + } + value |= ssi_transfer(s->spi, extract16(data, 0, 8)); + s->regs[R_PSPI_DATA] = value; + + /* Mark data as available */ + s->regs[R_PSPI_STAT] = R_PSPI_STAT_BSY_MASK | R_PSPI_STAT_RBF_MASK; +} + +/* Control register read handler. */ +static uint64_t npcm_pspi_ctrl_read(void *opaque, hwaddr addr, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value; + + switch (addr) { + case A_PSPI_DATA: + value = npcm_pspi_read_data(s); + break; + + case A_PSPI_CTL1: + value = s->regs[R_PSPI_CTL1]; + break; + + case A_PSPI_STAT: + value = s->regs[R_PSPI_STAT]; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return 0; + } + trace_npcm_pspi_ctrl_read(DEVICE(s)->canonical_path, addr, value); + npcm_pspi_update_irq(s); + + return value; +} + +/* Control register write handler. */ +static void npcm_pspi_ctrl_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value = v; + + trace_npcm_pspi_ctrl_write(DEVICE(s)->canonical_path, addr, value); + + switch (addr) { + case A_PSPI_DATA: + npcm_pspi_write_data(s, value); + break; + + case A_PSPI_CTL1: + s->regs[R_PSPI_CTL1] = value; + break; + + case A_PSPI_STAT: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register PSPI_STAT: 0x%08" + PRIx64 "\n", DEVICE(s)->canonical_path, v); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return; + } + npcm_pspi_update_irq(s); +} + +static const MemoryRegionOps npcm_pspi_ctrl_ops = { + .read = npcm_pspi_ctrl_read, + .write = npcm_pspi_ctrl_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 2, + .unaligned = false, + }, + .impl = { + .min_access_size = 2, + .max_access_size = 2, + .unaligned = false, + }, +}; + +static void npcm_pspi_enter_reset(Object *obj, ResetType type) +{ + NPCMPSPIState *s = NPCM_PSPI(obj); + + trace_npcm_pspi_enter_reset(DEVICE(obj)->canonical_path, type); + memset(s->regs, 0, sizeof(s->regs)); +} + +static void npcm_pspi_realize(DeviceState *dev, Error **errp) +{ + NPCMPSPIState *s = NPCM_PSPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Object *obj = OBJECT(dev); + + s->spi = ssi_create_bus(dev, "pspi"); + memory_region_init_io(&s->mmio, obj, &npcm_pspi_ctrl_ops, s, + "mmio", 4 * KiB); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); +} + +static const VMStateDescription vmstate_npcm_pspi = { + .name = "npcm-pspi", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT16_ARRAY(regs, NPCMPSPIState, NPCM_PSPI_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + + +static void npcm_pspi_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM Peripheral SPI Module"; + dc->realize = npcm_pspi_realize; + dc->vmsd = &vmstate_npcm_pspi; + rc->phases.enter = npcm_pspi_enter_reset; +} + +static const TypeInfo npcm_pspi_types[] = { + { + .name = TYPE_NPCM_PSPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMPSPIState), + .class_init = npcm_pspi_class_init, + }, +}; +DEFINE_TYPES(npcm_pspi_types); diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/meson.build +++ b/hw/ssi/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_smc.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-spi.c')) -softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c', 'npcm_pspi.c')) softmmu_ss.add(when: 'CONFIG_PL022', if_true: files('pl022.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_SPI', if_true: files('sifive_spi.c')) softmmu_ss.add(when: 'CONFIG_SSI', if_true: files('ssi.c')) diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 npcm7xx_fiu_flash_write(const char *id, unsigned cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 +# npcm_pspi.c +npcm_pspi_enter_reset(const char *id, int reset_type) "%s reset type: %d" +npcm_pspi_ctrl_read(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 +npcm_pspi_ctrl_write(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 + # ibex_spi_host.c ibex_spi_host_reset(const char *msg) "%s" -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 25 +++++++++++++++++++++++-- 3 files changed, 26 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * SMBus controller (SMBF) * Ethernet controller (EMC) * Tachometer + * Peripheral SPI controller (PSPI) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controller (GMAC) * USB device (USBD) - * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface * PCI and PCIe root complex and bridges diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/ssi/npcm_pspi.h" #include "hw/usb/hcd-ehci.h" #include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; + NPCMPSPIState pspi[2]; }; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_EMC1RX_IRQ = 15, NPCM7XX_EMC1TX_IRQ, NPCM7XX_MMC_IRQ = 26, + NPCM7XX_PSPI2_IRQ = 28, + NPCM7XX_PSPI1_IRQ = 31, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_emc_addr[] = { 0xf0826000, }; +/* Register base address for each PSPI Module */ +static const hwaddr npcm7xx_pspi_addr[] = { + 0xf0200000, + 0xf0201000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); } + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + object_initialize_child(obj, "pspi[*]", &s->pspi[i], TYPE_NPCM_PSPI); + } + object_initialize_child(obj, "mmc", &s->mmc, TYPE_NPCM7XX_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc), 0, npcm7xx_irq(s, NPCM7XX_MMC_IRQ)); + /* PSPI */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pspi_addr) != ARRAY_SIZE(s->pspi)); + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pspi[i]); + int irq = (i == 0) ? NPCM7XX_PSPI1_IRQ : NPCM7XX_PSPI2_IRQ; + + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_pspi_addr[i]); + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, irq)); + } + create_unimplemented_device("npcm7xx.shm", 0xc0001000, 4 * KiB); create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi1", 0xf0200000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi2", 0xf0201000, 4 * KiB); create_unimplemented_device("npcm7xx.ahbpci", 0xf0400000, 1 * MiB); create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 2 -- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ #define SMMU_PCI_DEVFN_MAX 256 #define SMMU_PCI_DEVFN(sid) (sid & 0xFF) -#define SMMU_MAX_VA_BITS 48 - /* * Page table walk error types */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) memory_region_init_iommu(&sdev->iommu, sizeof(sdev->iommu), s->mrtypename, - OBJECT(s), name, 1ULL << SMMU_MAX_VA_BITS); + OBJECT(s), name, UINT64_MAX); address_space_init(&sdev->as, MEMORY_REGION(&sdev->iommu), name); trace_smmu_add_mr(name); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUTransTableInfo *select_tt(SMMUTransCfg *cfg, dma_addr_t iova) /* there is a ttbr0 region and we are in it (high bits all zero) */ return &cfg->tt[0]; } else if (cfg->tt[1].tsz && - !extract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte)) { + sextract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte) == -1) { /* there is a ttbr1 region and we are in it (high bits all one) */ return &cfg->tt[1]; } else if (!cfg->tt[0].tsz) { -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> make it clearer from the name that this is a tcg-only function. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) * trapped to the hypervisor in KVM. */ #ifdef CONFIG_TCG -static void handle_semihosting(CPUState *cs) +static void tcg_handle_semihosting(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) */ #ifdef CONFIG_TCG if (cs->exception_index == EXCP_SEMIHOST) { - handle_semihosting(cs); + tcg_handle_semihosting(cs); return; } #endif -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> for "all" builds (tcg + kvm), we want to avoid doing the psci check if tcg is built-in, but not enabled. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" +#include "sysemu/tcg.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) env->exception.syndrome); } - if (arm_is_psci_call(cpu, cs->exception_index)) { + if (tcg_enabled() && arm_is_psci_call(cpu, cs->exception_index)) { arm_handle_psci_call(cpu); qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); return; -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) unsigned int cur_el = arm_current_el(env); int rt; - /* - * Note that new_el can never be 0. If cur_el is 0, then - * el0_a64 is is_a64(), else el0_a64 is ignored. - */ - aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + if (tcg_enabled()) { + /* + * Note that new_el can never be 0. If cur_el is 0, then + * el0_a64 is is_a64(), else el0_a64 is ignored. + */ + aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + } if (cur_el < new_el) { /* -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Move this earlier to make the next patch diff cleaner. While here update the comment slightly to not give the impression that the misalignment affects only TCG. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } + /* + * Misaligned thumb pc is architecturally impossible. Fail the + * incoming migration. For TCG it would trigger the assert in + * thumb_tr_translate_insn(). + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } - /* - * Misaligned thumb pc is architecturally impossible. - * We have an assert in thumb_tr_translate_insn to verify this. - * Fail an incoming migrate to avoid this assert. - */ - if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { - return -1; - } - if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Since commit cf7c6d1004 ("target/arm: Split out cpregs.h") we now have a cpregs.h header which is more suitable for this code. Code moved verbatim. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 98 +++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 91 ----------------------------------------- 2 files changed, 98 insertions(+), 91 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SME = 1 << 19, }; +/* + * Interface for defining coprocessor registers. + * Registers are defined in tables of arm_cp_reginfo structs + * which are passed to define_arm_cp_regs(). + */ + +/* + * When looking up a coprocessor register we look for it + * via an integer which encodes all of: + * coprocessor number + * Crn, Crm, opc1, opc2 fields + * 32 or 64 bit register (ie is it accessed via MRC/MCR + * or via MRRC/MCRR?) + * non-secure/secure bank (AArch32 only) + * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. + * (In this case crn and opc2 should be zero.) + * For AArch64, there is no 32/64 bit size distinction; + * instead all registers have a 2 bit op0, 3 bit op1 and op2, + * and 4 bit CRn and CRm. The encoding patterns are chosen + * to be easy to convert to and from the KVM encodings, and also + * so that the hashtable can contain both AArch32 and AArch64 + * registers (to allow for interprocessing where we might run + * 32 bit code on a 64 bit core). + */ +/* + * This bit is private to our hashtable cpreg; in KVM register + * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 + * in the upper bits of the 64 bit ID. + */ +#define CP_REG_AA64_SHIFT 28 +#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) + +/* + * To enable banking of coprocessor registers depending on ns-bit we + * add a bit to distinguish between secure and non-secure cpregs in the + * hashtable. + */ +#define CP_REG_NS_SHIFT 29 +#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) + +#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ + ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ + ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) + +#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ + (CP_REG_AA64_MASK | \ + ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ + ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ + ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ + ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ + ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ + ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) + +/* + * Convert a full 64 bit KVM register ID to the truncated 32 bit + * version used as a key for the coprocessor register hashtable + */ +static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) +{ + uint32_t cpregid = kvmid; + if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { + cpregid |= CP_REG_AA64_MASK; + } else { + if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { + cpregid |= (1 << 15); + } + + /* + * KVM is always non-secure so add the NS flag on AArch32 register + * entries. + */ + cpregid |= 1 << CP_REG_NS_SHIFT; + } + return cpregid; +} + +/* + * Convert a truncated 32 bit hashtable key into the full + * 64 bit KVM register ID. + */ +static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) +{ + uint64_t kvmid; + + if (cpregid & CP_REG_AA64_MASK) { + kvmid = cpregid & ~CP_REG_AA64_MASK; + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; + } else { + kvmid = cpregid & ~(1 << 15); + if (cpregid & (1 << 15)) { + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + } else { + kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + } + } + return kvmid; +} + /* * Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface for defining coprocessor registers. - * Registers are defined in tables of arm_cp_reginfo structs - * which are passed to define_arm_cp_regs(). - */ - -/* When looking up a coprocessor register we look for it - * via an integer which encodes all of: - * coprocessor number - * Crn, Crm, opc1, opc2 fields - * 32 or 64 bit register (ie is it accessed via MRC/MCR - * or via MRRC/MCRR?) - * non-secure/secure bank (AArch32 only) - * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. - * (In this case crn and opc2 should be zero.) - * For AArch64, there is no 32/64 bit size distinction; - * instead all registers have a 2 bit op0, 3 bit op1 and op2, - * and 4 bit CRn and CRm. The encoding patterns are chosen - * to be easy to convert to and from the KVM encodings, and also - * so that the hashtable can contain both AArch32 and AArch64 - * registers (to allow for interprocessing where we might run - * 32 bit code on a 64 bit core). - */ -/* This bit is private to our hashtable cpreg; in KVM register - * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 - * in the upper bits of the 64 bit ID. - */ -#define CP_REG_AA64_SHIFT 28 -#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) - -/* To enable banking of coprocessor registers depending on ns-bit we - * add a bit to distinguish between secure and non-secure cpregs in the - * hashtable. - */ -#define CP_REG_NS_SHIFT 29 -#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) - -#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ - ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ - ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) - -#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ - (CP_REG_AA64_MASK | \ - ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ - ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ - ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ - ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ - ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ - ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) - -/* Convert a full 64 bit KVM register ID to the truncated 32 bit - * version used as a key for the coprocessor register hashtable - */ -static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) -{ - uint32_t cpregid = kvmid; - if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { - cpregid |= CP_REG_AA64_MASK; - } else { - if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { - cpregid |= (1 << 15); - } - - /* KVM is always non-secure so add the NS flag on AArch32 register - * entries. - */ - cpregid |= 1 << CP_REG_NS_SHIFT; - } - return cpregid; -} - -/* Convert a truncated 32 bit hashtable key into the full - * 64 bit KVM register ID. - */ -static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) -{ - uint64_t kvmid; - - if (cpregid & CP_REG_AA64_MASK) { - kvmid = cpregid & ~CP_REG_AA64_MASK; - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; - } else { - kvmid = cpregid & ~(1 << 15); - if (cpregid & (1 << 15)) { - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; - } else { - kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; - } - } - return kvmid; -} - /* Return the highest implemented Exception Level */ static inline int arm_highest_el(CPUARMState *env) { -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> If a test was tagged with the "accel" tag and the specified accelerator it not present in the qemu binary, cancel the test. We can now write tests without explicit calls to require_accelerator, just the tag is enough. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/avocado_qemu/__init__.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/avocado/avocado_qemu/__init__.py b/tests/avocado/avocado_qemu/__init__.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/avocado_qemu/__init__.py +++ b/tests/avocado/avocado_qemu/__init__.py @@ -XXX,XX +XXX,XX @@ def setUp(self): super().setUp('qemu-system-') + accel_required = self._get_unique_tag_val('accel') + if accel_required: + self.require_accelerator(accel_required) + self.machine = self.params.get('machine', default=self._get_unique_tag_val('machine')) -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> This allows the test to be skipped when TCG is not present in the QEMU binary. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 1 + tests/avocado/reverse_debugging.py | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_orangepi_uboot_netbsd9(self): def test_aarch64_raspi3_atf(self): """ + :avocado: tags=accel:tcg :avocado: tags=arch:aarch64 :avocado: tags=machine:raspi3b :avocado: tags=cpu:cortex-a53 diff --git a/tests/avocado/reverse_debugging.py b/tests/avocado/reverse_debugging.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/reverse_debugging.py +++ b/tests/avocado/reverse_debugging.py @@ -XXX,XX +XXX,XX @@ def reverse_debugging(self, shift=7, args=None): vm.shutdown() class ReverseDebugging_X86_64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 0x10 REG_CS = 0x12 def get_pc(self, g): @@ -XXX,XX +XXX,XX @@ def test_x86_64_pc(self): self.reverse_debugging() class ReverseDebugging_AArch64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 32 # unidentified gitlab timeout problem -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) mc->minimum_page_bits = 12; mc->possible_cpu_arch_ids = virt_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = virt_cpu_index_to_props; +#ifdef CONFIG_TCG mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); +#else + mc->default_cpu_type = ARM_CPU_TYPE_NAME("max"); +#endif mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; assert(!mc->get_hotplug_handler); -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ #define SVE_MAX_VQ 16 #define MACHINE "-machine virt,gic-version=max -accel tcg " -#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm -accel tcg " +#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm " #define QUERY_HEAD "{ 'execute': 'query-cpu-model-expansion', " \ " 'arguments': { 'type': 'full', " #define QUERY_TAIL "}}" @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) { g_test_init(&argc, &argv, NULL); - qtest_add_data_func("/arm/query-cpu-model-expansion", - NULL, test_query_cpu_model_expansion); + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/query-cpu-model-expansion", + NULL, test_query_cpu_model_expansion); + } + + if (!g_str_equal(qtest_get_arch(), "aarch64")) { + goto out; + } /* * For now we only run KVM specific tests with AArch64 QEMU in * order avoid attempting to run an AArch32 QEMU with KVM on * AArch64 hosts. That won't work and isn't easy to detect. */ - if (g_str_equal(qtest_get_arch(), "aarch64") && qtest_has_accel("kvm")) { + if (qtest_has_accel("kvm")) { /* * This tests target the 'host' CPU type, so register it only if * KVM is available. */ qtest_add_data_func("/arm/kvm/query-cpu-model-expansion", NULL, test_query_cpu_model_expansion_kvm); - } - if (g_str_equal(qtest_get_arch(), "aarch64")) { - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", - NULL, sve_tests_sve_max_vq_8); - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", - NULL, sve_tests_sve_off); qtest_add_data_func("/arm/kvm/query-cpu-model-expansion/sve-off", NULL, sve_tests_sve_off_kvm); } + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", + NULL, sve_tests_sve_max_vq_8); + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", + NULL, sve_tests_sve_off); + } + +out: return g_test_run(); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> These tests set -accel tcg, so restrict them to when TCG is present. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_arm = \ # TODO: once aarch64 TCG is fixed on ARM 32 bit host, make bios-tables-test unconditional qtests_aarch64 = \ (cpu != 'arm' and unpack_edk2_blobs ? ['bios-tables-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \ + (config_all.has_key('CONFIG_TCG') and config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? \ + ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ ['arm-cpu-features', -- 2.34.1