Some arm patches; my to-review queue is by no means empty, but this is a big enough set of patches to be getting on with... -- PMM The following changes since commit cb9c6a8e5ad6a1f0ce164d352e3102df46986e22: .gitlab-ci.d/windows: Work-around timeout and OpenGL problems of the MSYS2 jobs (2023-01-04 18:58:33 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230105 for you to fetch changes up to 93c9678de9dc7d2e68f9e8477da072bac30ef132: hw/net: Fix read of uninitialized memory in imx_fec. (2023-01-05 15:33:00 +0000) ---------------------------------------------------------------- target-arm queue: * Implement AArch32 ARMv8-R support * Add Cortex-R52 CPU * fix handling of HLT semihosting in system mode * hw/timer/ixm_epit: cleanup and fix bug in compare handling * target/arm: Coding style fixes * target/arm: Clean up includes * nseries: minor code cleanups * target/arm: align exposed ID registers with Linux * hw/arm/smmu-common: remove unnecessary inlines * i.MX7D: Handle GPT timers * i.MX7D: Connect IRQs to GPIO devices * i.MX6UL: Add a specific GPT timer instance * hw/net: Fix read of uninitialized memory in imx_fec ---------------------------------------------------------------- Alex Bennée (1): target/arm: fix handling of HLT semihosting in system mode Axel Heider (8): hw/timer/imx_epit: improve comments hw/timer/imx_epit: cleanup CR defines hw/timer/imx_epit: define SR_OCIF hw/timer/imx_epit: update interrupt state on CR write access hw/timer/imx_epit: hard reset initializes CR with 0 hw/timer/imx_epit: factor out register write handlers hw/timer/imx_epit: remove explicit fields cnt and freq hw/timer/imx_epit: fix compare timer handling Claudio Fontana (1): target/arm: cleanup cpu includes Fabiano Rosas (5): target/arm: Fix checkpatch comment style warnings in helper.c target/arm: Fix checkpatch space errors in helper.c target/arm: Fix checkpatch brace errors in helper.c target/arm: Remove unused includes from m_helper.c target/arm: Remove unused includes from helper.c Jean-Christophe Dubois (4): i.MX7D: Connect GPT timers to IRQ i.MX7D: Compute clock frequency for the fixed frequency clocks. i.MX6UL: Add a specific GPT timer instance for the i.MX6UL i.MX7D: Connect IRQs to GPIO devices. Peter Maydell (1): target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it Philippe Mathieu-Daudé (5): hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg hw/arm/nseries: Constify various read-only arrays hw/arm/nseries: Silent -Wmissing-field-initializers warning hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope hw/arm/smmu-common: Avoid using inlined functions with external linkage Stephen Longfield (1): hw/net: Fix read of uninitialized memory in imx_fec. Tobias Röhmel (7): target/arm: Don't add all MIDR aliases for cores that implement PMSA target/arm: Make RVBAR available for all ARMv8 CPUs target/arm: Make stage_2_format for cache attributes optional target/arm: Enable TTBCR_EAE for ARMv8-R AArch32 target/arm: Add PMSAv8r registers target/arm: Add PMSAv8r functionality target/arm: Add ARM Cortex-R52 CPU Zhuojia Shen (1): target/arm: align exposed ID registers with Linux include/hw/arm/fsl-imx7.h | 20 + include/hw/arm/smmu-common.h | 3 - include/hw/input/tsc2xxx.h | 4 +- include/hw/timer/imx_epit.h | 8 +- include/hw/timer/imx_gpt.h | 1 + target/arm/cpu.h | 6 + target/arm/internals.h | 4 + hw/arm/fsl-imx6ul.c | 2 +- hw/arm/fsl-imx7.c | 41 +- hw/arm/nseries.c | 28 +- hw/arm/smmu-common.c | 15 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 3 +- hw/misc/imx6ul_ccm.c | 6 - hw/misc/imx7_ccm.c | 49 ++- hw/net/imx_fec.c | 8 +- hw/timer/imx_epit.c | 376 +++++++++------- hw/timer/imx_gpt.c | 25 ++ target/arm/cpu.c | 35 +- target/arm/cpu64.c | 6 - target/arm/cpu_tcg.c | 42 ++ target/arm/debug_helper.c | 3 + target/arm/helper.c | 871 +++++++++++++++++++++++++++++--------- target/arm/m_helper.c | 16 - target/arm/machine.c | 28 ++ target/arm/ptw.c | 152 +++++-- target/arm/tlb_helper.c | 4 + target/arm/translate.c | 2 +- tests/tcg/aarch64/sysregs.c | 24 +- tests/tcg/aarch64/Makefile.target | 7 +- 30 files changed, 1330 insertions(+), 461 deletions(-) In get_phys_addr_twostage() we set the lg_page_size of the result to the maximum of the stage 1 and stage 2 page sizes. This works for the case where we do want to create a TLB entry, because we know the common TLB code only creates entries of the TARGET_PAGE_SIZE and asking for a size larger than that only means that invalidations invalidate the whole larger area. However, if lg_page_size is smaller than TARGET_PAGE_SIZE this effectively means "don't create a TLB entry"; in this case if either S1 or S2 said "this covers less than a page and can't go in a TLB" then the final result also should be marked that way. Set the resulting page size to 0 if either stage asked for a less-than-a-page entry, and expand the comment to explain what's going on. This has no effect for VMSA because currently the VMSA lookup always returns results that cover at least TARGET_PAGE_SIZE; however when we add v8R support it will reuse this code path, and for v8R the S1 and S2 results can be smaller than TARGET_PAGE_SIZE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221212142708.610090-1-peter.maydell@linaro.org --- target/arm/ptw.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_twostage(CPUARMState *env, S1Translate *ptw, } /* - * Use the maximum of the S1 & S2 page size, so that invalidation - * of pages > TARGET_PAGE_SIZE works correctly. + * If either S1 or S2 returned a result smaller than TARGET_PAGE_SIZE, + * this means "don't put this in the TLB"; in this case, return a + * result with lg_page_size == 0 to achieve that. Otherwise, + * use the maximum of the S1 & S2 page size, so that invalidation + * of pages > TARGET_PAGE_SIZE works correctly. (This works even though + * we know the combined result permissions etc only cover the minimum + * of the S1 and S2 page size, because we know that the common TLB code + * never actually creates TLB entries bigger than TARGET_PAGE_SIZE, + * and passing a larger page size value only affects invalidations.) */ - if (result->f.lg_page_size < s1_lgpgsz) { + if (result->f.lg_page_size < TARGET_PAGE_BITS || + s1_lgpgsz < TARGET_PAGE_BITS) { + result->f.lg_page_size = 0; + } else if (result->f.lg_page_size < s1_lgpgsz) { result->f.lg_page_size = s1_lgpgsz; } -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Cores with PMSA have the MPUIR register which has the same encoding as the MIDR alias with opc2=4. So we only add that alias if we are not realizing a core that implements PMSA. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221206102504.165775-2-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_NO_RAW, .resetvalue = cpu->midr, .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid), .readfn = midr_read }, - /* crn = 0 op1 = 0 crm = 0 op2 = 4,7 : AArch32 aliases of MIDR */ - { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, - .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, - .access = PL1_R, .resetvalue = cpu->midr }, + /* crn = 0 op1 = 0 crm = 0 op2 = 7 : AArch32 aliases of MIDR */ { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 7, .access = PL1_R, .resetvalue = cpu->midr }, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .accessfn = access_aa64_tid1, .type = ARM_CP_CONST, .resetvalue = cpu->revidr }, }; + ARMCPRegInfo id_v8_midr_alias_cp_reginfo = { + .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, + .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, + .access = PL1_R, .resetvalue = cpu->midr + }; ARMCPRegInfo id_cp_reginfo[] = { /* These are common to v8 and pre-v8 */ { .name = "CTR", @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } if (arm_feature(env, ARM_FEATURE_V8)) { define_arm_cp_regs(cpu, id_v8_midr_cp_reginfo); + if (!arm_feature(env, ARM_FEATURE_PMSA)) { + define_one_arm_cp_reg(cpu, &id_v8_midr_alias_cp_reginfo); + } } else { define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo); } -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> RVBAR shadows RVBAR_ELx where x is the highest exception level if the highest EL is not EL3. This patch also allows ARMv8 CPUs to change the reset address with the rvbar property. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-3-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 +++++- target/arm/helper.c | 21 ++++++++++++++------- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, CPACR, CP11, 3); #endif + if (arm_feature(env, ARM_FEATURE_V8)) { + env->cp15.rvbar = cpu->rvbar_prop; + env->regs[15] = cpu->rvbar_prop; + } } #if defined(CONFIG_USER_ONLY) @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) qdev_property_add_static(DEVICE(obj), &arm_cpu_reset_hivecs_property); } - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { object_property_add_uint64_ptr(obj, "rvbar", &cpu->rvbar_prop, OBJ_PROP_FLAG_READWRITE); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (!arm_feature(env, ARM_FEATURE_EL3) && !arm_feature(env, ARM_FEATURE_EL2)) { ARMCPRegInfo rvbar = { - .name = "RVBAR_EL1", .state = ARM_CP_STATE_AA64, + .name = "RVBAR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, .access = PL1_R, .fieldoffset = offsetof(CPUARMState, cp15.rvbar), @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } /* RVBAR_EL2 is only implemented if EL2 is the highest EL */ if (!arm_feature(env, ARM_FEATURE_EL3)) { - ARMCPRegInfo rvbar = { - .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1, - .access = PL2_R, - .fieldoffset = offsetof(CPUARMState, cp15.rvbar), + ARMCPRegInfo rvbar[] = { + { + .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1, + .access = PL2_R, + .fieldoffset = offsetof(CPUARMState, cp15.rvbar), + }, + { .name = "RVBAR", .type = ARM_CP_ALIAS, + .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, + .access = PL2_R, + .fieldoffset = offsetof(CPUARMState, cp15.rvbar), + }, }; - define_one_arm_cp_reg(cpu, &rvbar); + define_arm_cp_regs(cpu, rvbar); } } -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> The v8R PMSAv8 has a two-stage MPU translation process, but, unlike VMSAv8, the stage 2 attributes are in the same format as the stage 1 attributes (8-bit MAIR format). Rather than converting the MAIR format to the format used for VMSA stage 2 (bits [5:2] of a VMSA stage 2 descriptor) and then converting back to do the attribute combination, allow combined_attrs_nofwb() to accept s2 attributes that are already in the MAIR format. We move the assert() to combined_attrs_fwb(), because that function really does require a VMSA stage 2 attribute format. (We will never get there for v8R, because PMSAv8 does not implement FEAT_S2FWB.) Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-4-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static uint8_t combined_attrs_nofwb(uint64_t hcr, { uint8_t s1lo, s2lo, s1hi, s2hi, s2_mair_attrs, ret_attrs; - s2_mair_attrs = convert_stage2_attrs(hcr, s2.attrs); + if (s2.is_s2_format) { + s2_mair_attrs = convert_stage2_attrs(hcr, s2.attrs); + } else { + s2_mair_attrs = s2.attrs; + } s1lo = extract32(s1.attrs, 0, 4); s2lo = extract32(s2_mair_attrs, 0, 4); @@ -XXX,XX +XXX,XX @@ static uint8_t force_cacheattr_nibble_wb(uint8_t attr) */ static uint8_t combined_attrs_fwb(ARMCacheAttrs s1, ARMCacheAttrs s2) { + assert(s2.is_s2_format && !s1.is_s2_format); + switch (s2.attrs) { case 7: /* Use stage 1 attributes */ @@ -XXX,XX +XXX,XX @@ static ARMCacheAttrs combine_cacheattrs(uint64_t hcr, ARMCacheAttrs ret; bool tagged = false; - assert(s2.is_s2_format && !s1.is_s2_format); + assert(!s1.is_s2_format); ret.is_s2_format = false; if (s1.attrs == 0xf0) { -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> ARMv8-R AArch32 CPUs behave as if TTBCR.EAE is always 1 even tough they don't have the TTBCR register. See ARM Architecture Reference Manual Supplement - ARMv8, for the ARMv8-R AArch32 architecture profile Version:A.c section C1.2. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-5-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 4 ++++ target/arm/debug_helper.c | 3 +++ target/arm/tlb_helper.c | 4 ++++ 3 files changed, 11 insertions(+) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ unsigned int arm_pamax(ARMCPU *cpu); static inline bool extended_addresses_enabled(CPUARMState *env) { uint64_t tcr = env->cp15.tcr_el[arm_is_secure(env) ? 3 : 1]; + if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + return true; + } return arm_el_is_aa64(env, 1) || (arm_feature(env, ARM_FEATURE_LPAE) && (tcr & TTBCR_EAE)); } diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t arm_debug_exception_fsr(CPUARMState *env) if (target_el == 2 || arm_el_is_aa64(env, target_el)) { using_lpae = true; + } else if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + using_lpae = true; } else { if (arm_feature(env, ARM_FEATURE_LPAE) && (env->cp15.tcr_el[target_el] & TTBCR_EAE)) { diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ bool regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx) if (el == 2 || arm_el_is_aa64(env, el)) { return true; } + if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + return true; + } if (arm_feature(env, ARM_FEATURE_LPAE) && (regime_tcr(env, mmu_idx) & TTBCR_EAE)) { return true; -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Message-id: 20221206102504.165775-6-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 + target/arm/cpu.c | 28 +++- target/arm/helper.c | 302 +++++++++++++++++++++++++++++++++++++++++++ target/arm/machine.c | 28 ++++ 4 files changed, 360 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { }; uint64_t sctlr_el[4]; }; + uint64_t vsctlr; /* Virtualization System control register. */ uint64_t cpacr_el1; /* Architectural feature access control register */ uint64_t cptr_el[4]; /* ARMv8 feature trap registers */ uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */ @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { */ uint32_t *rbar[M_REG_NUM_BANKS]; uint32_t *rlar[M_REG_NUM_BANKS]; + uint32_t *hprbar; + uint32_t *hprlar; uint32_t mair0[M_REG_NUM_BANKS]; uint32_t mair1[M_REG_NUM_BANKS]; + uint32_t hprselr; } pmsav8; /* v8M SAU */ @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool has_mpu; /* PMSAv7 MPU number of supported regions */ uint32_t pmsav7_dregion; + /* PMSAv8 MPU number of supported hyp regions */ + uint32_t pmsav8r_hdregion; /* v8M SAU number of supported regions */ uint32_t sau_sregion; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) sizeof(*env->pmsav7.dracr) * cpu->pmsav7_dregion); } } + + if (cpu->pmsav8r_hdregion > 0) { + memset(env->pmsav8.hprbar, 0, + sizeof(*env->pmsav8.hprbar) * cpu->pmsav8r_hdregion); + memset(env->pmsav8.hprlar, 0, + sizeof(*env->pmsav8.hprlar) * cpu->pmsav8r_hdregion); + } + env->pmsav7.rnr[M_REG_NS] = 0; env->pmsav7.rnr[M_REG_S] = 0; env->pmsav8.mair0[M_REG_NS] = 0; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* MPU can be configured out of a PMSA CPU either by setting has-mpu * to false or by setting pmsav7-dregion to 0. */ - if (!cpu->has_mpu) { - cpu->pmsav7_dregion = 0; - } - if (cpu->pmsav7_dregion == 0) { + if (!cpu->has_mpu || cpu->pmsav7_dregion == 0) { cpu->has_mpu = false; + cpu->pmsav7_dregion = 0; + cpu->pmsav8r_hdregion = 0; } if (arm_feature(env, ARM_FEATURE_PMSA) && @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) env->pmsav7.dracr = g_new0(uint32_t, nr); } } + + if (cpu->pmsav8r_hdregion > 0xff) { + error_setg(errp, "PMSAv8 MPU EL2 #regions invalid %" PRIu32, + cpu->pmsav8r_hdregion); + return; + } + + if (cpu->pmsav8r_hdregion) { + env->pmsav8.hprbar = g_new0(uint32_t, + cpu->pmsav8r_hdregion); + env->pmsav8.hprlar = g_new0(uint32_t, + cpu->pmsav8r_hdregion); + } } if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void pmsav7_rgnr_write(CPUARMState *env, const ARMCPRegInfo *ri, raw_write(env, ri, value); } +static void prbar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value; +} + +static uint64_t prbar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]]; +} + +static void prlar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value; +} + +static uint64_t prlar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]]; +} + +static void prselr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + /* + * Ignore writes that would select not implemented region. + * This is architecturally UNPREDICTABLE. + */ + if (value >= cpu->pmsav7_dregion) { + return; + } + + env->pmsav7.rnr[M_REG_NS] = value; +} + +static void hprbar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.hprbar[env->pmsav8.hprselr] = value; +} + +static uint64_t hprbar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.hprbar[env->pmsav8.hprselr]; +} + +static void hprlar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.hprlar[env->pmsav8.hprselr] = value; +} + +static uint64_t hprlar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.hprlar[env->pmsav8.hprselr]; +} + +static void hprenr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + uint32_t n; + uint32_t bit; + ARMCPU *cpu = env_archcpu(env); + + /* Ignore writes to unimplemented regions */ + int rmax = MIN(cpu->pmsav8r_hdregion, 32); + value &= MAKE_64BIT_MASK(0, rmax); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + + /* Register alias is only valid for first 32 indexes */ + for (n = 0; n < rmax; ++n) { + bit = extract32(value, n, 1); + env->pmsav8.hprlar[n] = deposit32( + env->pmsav8.hprlar[n], 0, 1, bit); + } +} + +static uint64_t hprenr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + uint32_t n; + uint32_t result = 0x0; + ARMCPU *cpu = env_archcpu(env); + + /* Register alias is only valid for first 32 indexes */ + for (n = 0; n < MIN(cpu->pmsav8r_hdregion, 32); ++n) { + if (env->pmsav8.hprlar[n] & 0x1) { + result |= (0x1 << n); + } + } + return result; +} + +static void hprselr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + /* + * Ignore writes that would select not implemented region. + * This is architecturally UNPREDICTABLE. + */ + if (value >= cpu->pmsav8r_hdregion) { + return; + } + + env->pmsav8.hprselr = value; +} + +static void pmsav8r_regn_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + uint8_t index = (extract32(ri->opc0, 0, 1) << 4) | + (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + + if (ri->opc1 & 4) { + if (index >= cpu->pmsav8r_hdregion) { + return; + } + if (ri->opc2 & 0x1) { + env->pmsav8.hprlar[index] = value; + } else { + env->pmsav8.hprbar[index] = value; + } + } else { + if (index >= cpu->pmsav7_dregion) { + return; + } + if (ri->opc2 & 0x1) { + env->pmsav8.rlar[M_REG_NS][index] = value; + } else { + env->pmsav8.rbar[M_REG_NS][index] = value; + } + } +} + +static uint64_t pmsav8r_regn_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu = env_archcpu(env); + uint8_t index = (extract32(ri->opc0, 0, 1) << 4) | + (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1); + + if (ri->opc1 & 4) { + if (index >= cpu->pmsav8r_hdregion) { + return 0x0; + } + if (ri->opc2 & 0x1) { + return env->pmsav8.hprlar[index]; + } else { + return env->pmsav8.hprbar[index]; + } + } else { + if (index >= cpu->pmsav7_dregion) { + return 0x0; + } + if (ri->opc2 & 0x1) { + return env->pmsav8.rlar[M_REG_NS][index]; + } else { + return env->pmsav8.rbar[M_REG_NS][index]; + } + } +} + +static const ARMCPRegInfo pmsav8r_cp_reginfo[] = { + { .name = "PRBAR", + .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_NO_RAW, + .accessfn = access_tvm_trvm, + .readfn = prbar_read, .writefn = prbar_write }, + { .name = "PRLAR", + .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_NO_RAW, + .accessfn = access_tvm_trvm, + .readfn = prlar_read, .writefn = prlar_write }, + { .name = "PRSELR", .resetvalue = 0, + .cp = 15, .opc1 = 0, .crn = 6, .crm = 2, .opc2 = 1, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = prselr_write, + .fieldoffset = offsetof(CPUARMState, pmsav7.rnr[M_REG_NS]) }, + { .name = "HPRBAR", .resetvalue = 0, + .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 0, + .access = PL2_RW, .type = ARM_CP_NO_RAW, + .readfn = hprbar_read, .writefn = hprbar_write }, + { .name = "HPRLAR", + .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 1, + .access = PL2_RW, .type = ARM_CP_NO_RAW, + .readfn = hprlar_read, .writefn = hprlar_write }, + { .name = "HPRSELR", .resetvalue = 0, + .cp = 15, .opc1 = 4, .crn = 6, .crm = 2, .opc2 = 1, + .access = PL2_RW, + .writefn = hprselr_write, + .fieldoffset = offsetof(CPUARMState, pmsav8.hprselr) }, + { .name = "HPRENR", + .cp = 15, .opc1 = 4, .crn = 6, .crm = 1, .opc2 = 1, + .access = PL2_RW, .type = ARM_CP_NO_RAW, + .readfn = hprenr_read, .writefn = hprenr_write }, +}; + static const ARMCPRegInfo pmsav7_cp_reginfo[] = { /* Reset for all these registers is handled in arm_cpu_reset(), * because the PMSAv7 is also used by M-profile CPUs, which do @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->pmsav7_dregion << 8 }; + /* HMPUIR is specific to PMSA V8 */ + ARMCPRegInfo id_hmpuir_reginfo = { + .name = "HMPUIR", + .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL2_R, .type = ARM_CP_CONST, + .resetvalue = cpu->pmsav8r_hdregion + }; static const ARMCPRegInfo crn0_wi_reginfo = { .name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, id_cp_reginfo); if (!arm_feature(env, ARM_FEATURE_PMSA)) { define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo); + } else if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + uint32_t i = 0; + char *tmp_string; + + define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); + define_one_arm_cp_reg(cpu, &id_hmpuir_reginfo); + define_arm_cp_regs(cpu, pmsav8r_cp_reginfo); + + /* Register alias is only valid for first 32 indexes */ + for (i = 0; i < MIN(cpu->pmsav7_dregion, 32); ++i) { + uint8_t crm = 0b1000 | extract32(i, 1, 3); + uint8_t opc1 = extract32(i, 4, 1); + uint8_t opc2 = extract32(i, 0, 1) << 2; + + tmp_string = g_strdup_printf("PRBAR%u", i); + ARMCPRegInfo tmp_prbarn_reginfo = { + .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL1_RW, .resetvalue = 0, + .accessfn = access_tvm_trvm, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_prbarn_reginfo); + g_free(tmp_string); + + opc2 = extract32(i, 0, 1) << 2 | 0x1; + tmp_string = g_strdup_printf("PRLAR%u", i); + ARMCPRegInfo tmp_prlarn_reginfo = { + .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL1_RW, .resetvalue = 0, + .accessfn = access_tvm_trvm, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_prlarn_reginfo); + g_free(tmp_string); + } + + /* Register alias is only valid for first 32 indexes */ + for (i = 0; i < MIN(cpu->pmsav8r_hdregion, 32); ++i) { + uint8_t crm = 0b1000 | extract32(i, 1, 3); + uint8_t opc1 = 0b100 | extract32(i, 4, 1); + uint8_t opc2 = extract32(i, 0, 1) << 2; + + tmp_string = g_strdup_printf("HPRBAR%u", i); + ARMCPRegInfo tmp_hprbarn_reginfo = { + .name = tmp_string, + .type = ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL2_RW, .resetvalue = 0, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_hprbarn_reginfo); + g_free(tmp_string); + + opc2 = extract32(i, 0, 1) << 2 | 0x1; + tmp_string = g_strdup_printf("HPRLAR%u", i); + ARMCPRegInfo tmp_hprlarn_reginfo = { + .name = tmp_string, + .type = ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL2_RW, .resetvalue = 0, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_hprlarn_reginfo); + g_free(tmp_string); + } } else if (arm_feature(env, ARM_FEATURE_V7)) { define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); } @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) sctlr.type |= ARM_CP_SUPPRESS_TB_END; } define_one_arm_cp_reg(cpu, &sctlr); + + if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + ARMCPRegInfo vsctlr = { + .name = "VSCTLR", .state = ARM_CP_STATE_AA32, + .cp = 15, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, + .access = PL2_RW, .resetvalue = 0x0, + .fieldoffset = offsetoflow32(CPUARMState, cp15.vsctlr), + }; + define_one_arm_cp_reg(cpu, &vsctlr); + } } if (cpu_isar_feature(aa64_lor, cpu)) { diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool pmsav8_needed(void *opaque) arm_feature(env, ARM_FEATURE_V8); } +static bool pmsav8r_needed(void *opaque) +{ + ARMCPU *cpu = opaque; + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8) && + !arm_feature(env, ARM_FEATURE_M); +} + +static const VMStateDescription vmstate_pmsav8r = { + .name = "cpu/pmsav8/pmsav8r", + .version_id = 1, + .minimum_version_id = 1, + .needed = pmsav8r_needed, + .fields = (VMStateField[]) { + VMSTATE_VARRAY_UINT32(env.pmsav8.hprbar, ARMCPU, + pmsav8r_hdregion, 0, vmstate_info_uint32, uint32_t), + VMSTATE_VARRAY_UINT32(env.pmsav8.hprlar, ARMCPU, + pmsav8r_hdregion, 0, vmstate_info_uint32, uint32_t), + VMSTATE_END_OF_LIST() + }, +}; + static const VMStateDescription vmstate_pmsav8 = { .name = "cpu/pmsav8", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_pmsav8 = { VMSTATE_UINT32(env.pmsav8.mair0[M_REG_NS], ARMCPU), VMSTATE_UINT32(env.pmsav8.mair1[M_REG_NS], ARMCPU), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_pmsav8r, + NULL } }; -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Add PMSAv8r translation. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-7-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 126 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 104 insertions(+), 22 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool pmsav7_use_background_region(ARMCPU *cpu, ARMMMUIdx mmu_idx, if (arm_feature(env, ARM_FEATURE_M)) { return env->v7m.mpu_ctrl[is_secure] & R_V7M_MPU_CTRL_PRIVDEFENA_MASK; - } else { - return regime_sctlr(env, mmu_idx) & SCTLR_BR; } + + if (mmu_idx == ARMMMUIdx_Stage2) { + return false; + } + + return regime_sctlr(env, mmu_idx) & SCTLR_BR; } static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, return !(result->f.prot & (1 << access_type)); } +static uint32_t *regime_rbar(CPUARMState *env, ARMMMUIdx mmu_idx, + uint32_t secure) +{ + if (regime_el(env, mmu_idx) == 2) { + return env->pmsav8.hprbar; + } else { + return env->pmsav8.rbar[secure]; + } +} + +static uint32_t *regime_rlar(CPUARMState *env, ARMMMUIdx mmu_idx, + uint32_t secure) +{ + if (regime_el(env, mmu_idx) == 2) { + return env->pmsav8.hprlar; + } else { + return env->pmsav8.rlar[secure]; + } +} + bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, bool secure, GetPhysAddrResult *result, @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, bool hit = false; uint32_t addr_page_base = address & TARGET_PAGE_MASK; uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1); + int region_counter; + + if (regime_el(env, mmu_idx) == 2) { + region_counter = cpu->pmsav8r_hdregion; + } else { + region_counter = cpu->pmsav7_dregion; + } result->f.lg_page_size = TARGET_PAGE_BITS; result->f.phys_addr = address; @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, *mregion = -1; } + if (mmu_idx == ARMMMUIdx_Stage2) { + fi->stage2 = true; + } + /* * Unlike the ARM ARM pseudocode, we don't need to check whether this * was an exception vector read from the vector table (which is always @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, hit = true; } - for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) { + uint32_t bitmask; + if (arm_feature(env, ARM_FEATURE_M)) { + bitmask = 0x1f; + } else { + bitmask = 0x3f; + fi->level = 0; + } + + for (n = region_counter - 1; n >= 0; n--) { /* region search */ /* - * Note that the base address is bits [31:5] from the register - * with bits [4:0] all zeroes, but the limit address is bits - * [31:5] from the register with bits [4:0] all ones. + * Note that the base address is bits [31:x] from the register + * with bits [x-1:0] all zeroes, but the limit address is bits + * [31:x] from the register with bits [x:0] all ones. Where x is + * 5 for Cortex-M and 6 for Cortex-R */ - uint32_t base = env->pmsav8.rbar[secure][n] & ~0x1f; - uint32_t limit = env->pmsav8.rlar[secure][n] | 0x1f; + uint32_t base = regime_rbar(env, mmu_idx, secure)[n] & ~bitmask; + uint32_t limit = regime_rlar(env, mmu_idx, secure)[n] | bitmask; - if (!(env->pmsav8.rlar[secure][n] & 0x1)) { + if (!(regime_rlar(env, mmu_idx, secure)[n] & 0x1)) { /* Region disabled */ continue; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, * PMSAv7 where highest-numbered-region wins) */ fi->type = ARMFault_Permission; - fi->level = 1; + if (arm_feature(env, ARM_FEATURE_M)) { + fi->level = 1; + } return true; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, } if (!hit) { - /* background fault */ - fi->type = ARMFault_Background; + if (arm_feature(env, ARM_FEATURE_M)) { + fi->type = ARMFault_Background; + } else { + fi->type = ARMFault_Permission; + } return true; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, /* hit using the background region */ get_phys_addr_pmsav7_default(env, mmu_idx, address, &result->f.prot); } else { - uint32_t ap = extract32(env->pmsav8.rbar[secure][matchregion], 1, 2); - uint32_t xn = extract32(env->pmsav8.rbar[secure][matchregion], 0, 1); + uint32_t matched_rbar = regime_rbar(env, mmu_idx, secure)[matchregion]; + uint32_t matched_rlar = regime_rlar(env, mmu_idx, secure)[matchregion]; + uint32_t ap = extract32(matched_rbar, 1, 2); + uint32_t xn = extract32(matched_rbar, 0, 1); bool pxn = false; if (arm_feature(env, ARM_FEATURE_V8_1M)) { - pxn = extract32(env->pmsav8.rlar[secure][matchregion], 4, 1); + pxn = extract32(matched_rlar, 4, 1); } if (m_is_system_region(env, address)) { @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, xn = 1; } - result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap); + if (regime_el(env, mmu_idx) == 2) { + result->f.prot = simple_ap_to_rw_prot_is_user(ap, + mmu_idx != ARMMMUIdx_E2); + } else { + result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap); + } + + if (!arm_feature(env, ARM_FEATURE_M)) { + uint8_t attrindx = extract32(matched_rlar, 1, 3); + uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)]; + uint8_t sh = extract32(matched_rlar, 3, 2); + + if (regime_sctlr(env, mmu_idx) & SCTLR_WXN && + result->f.prot & PAGE_WRITE && mmu_idx != ARMMMUIdx_Stage2) { + xn = 0x1; + } + + if ((regime_el(env, mmu_idx) == 1) && + regime_sctlr(env, mmu_idx) & SCTLR_UWXN && ap == 0x1) { + pxn = 0x1; + } + + result->cacheattrs.is_s2_format = false; + result->cacheattrs.attrs = extract64(mair, attrindx * 8, 8); + result->cacheattrs.shareability = sh; + } + if (result->f.prot && !xn && !(pxn && !is_user)) { result->f.prot |= PAGE_EXEC; } - /* - * We don't need to look the attribute up in the MAIR0/MAIR1 - * registers because that only tells us about cacheability. - */ + if (mregion) { *mregion = matchregion; } } fi->type = ARMFault_Permission; - fi->level = 1; + if (arm_feature(env, ARM_FEATURE_M)) { + fi->level = 1; + } return !(result->f.prot & (1 << access_type)); } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_twostage(CPUARMState *env, S1Translate *ptw, cacheattrs1 = result->cacheattrs; memset(result, 0, sizeof(*result)); - ret = get_phys_addr_lpae(env, ptw, ipa, access_type, is_el0, result, fi); + if (arm_feature(env, ARM_FEATURE_PMSA)) { + ret = get_phys_addr_pmsav8(env, ipa, access_type, + ptw->in_mmu_idx, is_secure, result, fi); + } else { + ret = get_phys_addr_lpae(env, ptw, ipa, access_type, + is_el0, result, fi); + } fi->s2addr = ipa; /* Combine the S1 and S2 perms. */ -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> All constants are taken from the ARM Cortex-R52 Processor TRM Revision: r1p3 Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-8-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) define_arm_cp_regs(cpu, cortexr5_cp_reginfo); } +static void cortex_r52_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_PMSA); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + cpu->midr = 0x411fd133; /* r1p3 */ + cpu->revidr = 0x00000000; + cpu->reset_fpsid = 0x41034023; + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x12111111; + cpu->isar.mvfr2 = 0x00000043; + cpu->ctr = 0x8144c004; + cpu->reset_sctlr = 0x30c50838; + cpu->isar.id_pfr0 = 0x00000131; + cpu->isar.id_pfr1 = 0x10111001; + cpu->isar.id_dfr0 = 0x03010006; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00211040; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01200000; + cpu->isar.id_mmfr3 = 0xf0102211; + cpu->isar.id_mmfr4 = 0x00000010; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232142; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x00010001; + cpu->isar.dbgdidr = 0x77168000; + cpu->clidr = (1 << 27) | (1 << 24) | 0x3; + cpu->ccsidr[0] = 0x700fe01a; /* 32KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe00a; /* 32KB L1 icache */ + + cpu->pmsav7_dregion = 16; + cpu->pmsav8r_hdregion = 16; +} + static void cortex_r5f_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, + { .name = "cortex-r52", .initfn = cortex_r52_initfn }, { .name = "ti925t", .initfn = ti925t_initfn }, { .name = "sa1100", .initfn = sa1100_initfn }, { .name = "sa1110", .initfn = sa1110_initfn }, -- 2.25.1 From: Alex Bennée <alex.bennee@linaro.org> The check semihosting_enabled() wants to know if the guest is currently in user mode. Unlike the other cases the test was inverted causing us to block semihosting calls in non-EL0 modes. Cc: qemu-stable@nongnu.org Fixes: 19b26317e9 (target/arm: Honour -semihosting-config userspace=on) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_hlt(DisasContext *s, int imm) * semihosting, to provide some semblance of security * (and for consistency with our 32-bit semihosting). */ - if (semihosting_enabled(s->current_el != 0) && + if (semihosting_enabled(s->current_el == 0) && (imm == (s->thumb ? 0x3c : 0xf000))) { gen_exception_internal_insn(s, EXCP_SEMIHOST); return; -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Fix typos, add background information Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_set_freq(IMXEPITState *s) } } +/* + * This is called both on hardware (device) reset and software reset. + */ static void imx_epit_reset(DeviceState *dev) { IMXEPITState *s = IMX_EPIT(dev); - /* - * Soft reset doesn't touch some bits; hard reset clears them - */ + /* Soft reset doesn't touch some bits; hard reset clears them */ s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); s->sr = 0; s->lr = EPIT_TIMER_MAX; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); + /* Update the frequency. Has been done already in case of a reset. */ if (!(s->cr & CR_SWR)) { imx_epit_set_freq(s); } @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, break; case 1: /* SR - ACK*/ - /* writing 1 to OCIF clear the OCIF bit */ + /* writing 1 to OCIF clears the OCIF bit */ if (value & 0x01) { s->sr = 0; imx_epit_update_int(s); @@ -XXX,XX +XXX,XX @@ static void imx_epit_realize(DeviceState *dev, Error **errp) 0x00001000); sysbus_init_mmio(sbd, &s->iomem); + /* + * The reload timer keeps running when the peripheral is enabled. It is a + * kind of wall clock that does not generate any interrupts. The callback + * needs to be provided, but it does nothing as the ptimer already supports + * all necessary reloading functionality. + */ s->timer_reload = ptimer_init(imx_epit_reload, s, PTIMER_POLICY_LEGACY); + /* + * The compare timer is running only when the peripheral configuration is + * in a state that will generate compare interrupts. + */ s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_LEGACY); } -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> remove unused defines, add needed defines Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_epit.h | 4 ++-- hw/timer/imx_epit.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_epit.h +++ b/include/hw/timer/imx_epit.h @@ -XXX,XX +XXX,XX @@ #define CR_OCIEN (1 << 2) #define CR_RLD (1 << 3) #define CR_PRESCALE_SHIFT (4) -#define CR_PRESCALE_MASK (0xfff) +#define CR_PRESCALE_BITS (12) #define CR_SWR (1 << 16) #define CR_IOVW (1 << 17) #define CR_DBGEN (1 << 18) @@ -XXX,XX +XXX,XX @@ #define CR_DOZEN (1 << 20) #define CR_STOPEN (1 << 21) #define CR_CLKSRC_SHIFT (24) -#define CR_CLKSRC_MASK (0x3 << CR_CLKSRC_SHIFT) +#define CR_CLKSRC_BITS (2) #define EPIT_TIMER_MAX 0XFFFFFFFFUL diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_set_freq(IMXEPITState *s) uint32_t clksrc; uint32_t prescaler; - clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2); - prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12); + clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS); + prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS); s->freq = imx_ccm_get_clock_frequency(s->ccm, imx_epit_clocks[clksrc]) / prescaler; -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_epit.h | 2 ++ hw/timer/imx_epit.c | 12 ++++++------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_epit.h +++ b/include/hw/timer/imx_epit.h @@ -XXX,XX +XXX,XX @@ #define CR_CLKSRC_SHIFT (24) #define CR_CLKSRC_BITS (2) +#define SR_OCIF (1 << 0) + #define EPIT_TIMER_MAX 0XFFFFFFFFUL #define TYPE_IMX_EPIT "imx.epit" diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static const IMXClk imx_epit_clocks[] = { */ static void imx_epit_update_int(IMXEPITState *s) { - if (s->sr && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) { + if ((s->sr & SR_OCIF) && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) { qemu_irq_raise(s->irq); } else { qemu_irq_lower(s->irq); @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, break; case 1: /* SR - ACK*/ - /* writing 1 to OCIF clears the OCIF bit */ - if (value & 0x01) { - s->sr = 0; + /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */ + if (value & SR_OCIF) { + s->sr = 0; /* SR.OCIF is the only bit in this register anyway */ imx_epit_update_int(s); } break; @@ -XXX,XX +XXX,XX @@ static void imx_epit_cmp(void *opaque) IMXEPITState *s = IMX_EPIT(opaque); DPRINTF("sr was %d\n", s->sr); - - s->sr = 1; + /* Set interrupt status bit SR.OCIF and update the interrupt state */ + s->sr |= SR_OCIF; imx_epit_update_int(s); } -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> The interrupt state can change due to: - reset clears both SR.OCIF and CR.OCIE - write to CR.EN or CR.OCIE Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, if (s->cr & CR_SWR) { /* handle the reset */ imx_epit_reset(DEVICE(s)); - /* - * TODO: could we 'break' here? following operations appear - * to duplicate the work imx_epit_reset() already did. - */ } + /* + * The interrupt state can change due to: + * - reset clears both SR.OCIF and CR.OCIE + * - write to CR.EN or CR.OCIE + */ + imx_epit_update_int(s); + + /* + * TODO: could we 'break' here for reset? following operations appear + * to duplicate the work imx_epit_reset() already did. + */ + ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_set_freq(IMXEPITState *s) /* * This is called both on hardware (device) reset and software reset. */ -static void imx_epit_reset(DeviceState *dev) +static void imx_epit_reset(IMXEPITState *s, bool is_hard_reset) { - IMXEPITState *s = IMX_EPIT(dev); - /* Soft reset doesn't touch some bits; hard reset clears them */ - s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); + if (is_hard_reset) { + s->cr = 0; + } else { + s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); + } s->sr = 0; s->lr = EPIT_TIMER_MAX; s->cmp = 0; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, s->cr = value & 0x03ffffff; if (s->cr & CR_SWR) { /* handle the reset */ - imx_epit_reset(DEVICE(s)); + imx_epit_reset(s, false); } /* @@ -XXX,XX +XXX,XX @@ static void imx_epit_realize(DeviceState *dev, Error **errp) s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_LEGACY); } +static void imx_epit_dev_reset(DeviceState *dev) +{ + IMXEPITState *s = IMX_EPIT(dev); + imx_epit_reset(s, true); +} + static void imx_epit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->realize = imx_epit_realize; - dc->reset = imx_epit_reset; + dc->reset = imx_epit_dev_reset; dc->vmsd = &vmstate_imx_timer_epit; dc->desc = "i.MX periodic timer"; } -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 215 ++++++++++++++++++++++++-------------------- 1 file changed, 117 insertions(+), 98 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_reload_compare_timer(IMXEPITState *s) } } +static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) +{ + uint32_t oldcr = s->cr; + + s->cr = value & 0x03ffffff; + + if (s->cr & CR_SWR) { + /* handle the reset */ + imx_epit_reset(s, false); + } + + /* + * The interrupt state can change due to: + * - reset clears both SR.OCIF and CR.OCIE + * - write to CR.EN or CR.OCIE + */ + imx_epit_update_int(s); + + /* + * TODO: could we 'break' here for reset? following operations appear + * to duplicate the work imx_epit_reset() already did. + */ + + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); + + /* Update the frequency. Has been done already in case of a reset. */ + if (!(s->cr & CR_SWR)) { + imx_epit_set_freq(s); + } + + if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { + if (s->cr & CR_ENMOD) { + if (s->cr & CR_RLD) { + ptimer_set_limit(s->timer_reload, s->lr, 1); + ptimer_set_limit(s->timer_cmp, s->lr, 1); + } else { + ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); + ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); + } + } + + imx_epit_reload_compare_timer(s); + ptimer_run(s->timer_reload, 0); + if (s->cr & CR_OCIEN) { + ptimer_run(s->timer_cmp, 0); + } else { + ptimer_stop(s->timer_cmp); + } + } else if (!(s->cr & CR_EN)) { + /* stop both timers */ + ptimer_stop(s->timer_reload); + ptimer_stop(s->timer_cmp); + } else if (s->cr & CR_OCIEN) { + if (!(oldcr & CR_OCIEN)) { + imx_epit_reload_compare_timer(s); + ptimer_run(s->timer_cmp, 0); + } + } else { + ptimer_stop(s->timer_cmp); + } + + ptimer_transaction_commit(s->timer_cmp); + ptimer_transaction_commit(s->timer_reload); +} + +static void imx_epit_write_sr(IMXEPITState *s, uint32_t value) +{ + /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */ + if (value & SR_OCIF) { + s->sr = 0; /* SR.OCIF is the only bit in this register anyway */ + imx_epit_update_int(s); + } +} + +static void imx_epit_write_lr(IMXEPITState *s, uint32_t value) +{ + s->lr = value; + + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); + if (s->cr & CR_RLD) { + /* Also set the limit if the LRD bit is set */ + /* If IOVW bit is set then set the timer value */ + ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW); + ptimer_set_limit(s->timer_cmp, s->lr, 0); + } else if (s->cr & CR_IOVW) { + /* If IOVW bit is set then set the timer value */ + ptimer_set_count(s->timer_reload, s->lr); + } + /* + * Commit the change to s->timer_reload, so it can propagate. Otherwise + * the timer interrupt may not fire properly. The commit must happen + * before calling imx_epit_reload_compare_timer(), which reads + * s->timer_reload internally again. + */ + ptimer_transaction_commit(s->timer_reload); + imx_epit_reload_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); +} + +static void imx_epit_write_cmp(IMXEPITState *s, uint32_t value) +{ + s->cmp = value; + + ptimer_transaction_begin(s->timer_cmp); + imx_epit_reload_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); +} + static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { IMXEPITState *s = IMX_EPIT(opaque); - uint64_t oldcr; DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(offset >> 2), (uint32_t)value); switch (offset >> 2) { case 0: /* CR */ - - oldcr = s->cr; - s->cr = value & 0x03ffffff; - if (s->cr & CR_SWR) { - /* handle the reset */ - imx_epit_reset(s, false); - } - - /* - * The interrupt state can change due to: - * - reset clears both SR.OCIF and CR.OCIE - * - write to CR.EN or CR.OCIE - */ - imx_epit_update_int(s); - - /* - * TODO: could we 'break' here for reset? following operations appear - * to duplicate the work imx_epit_reset() already did. - */ - - ptimer_transaction_begin(s->timer_cmp); - ptimer_transaction_begin(s->timer_reload); - - /* Update the frequency. Has been done already in case of a reset. */ - if (!(s->cr & CR_SWR)) { - imx_epit_set_freq(s); - } - - if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { - if (s->cr & CR_ENMOD) { - if (s->cr & CR_RLD) { - ptimer_set_limit(s->timer_reload, s->lr, 1); - ptimer_set_limit(s->timer_cmp, s->lr, 1); - } else { - ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); - ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); - } - } - - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_reload, 0); - if (s->cr & CR_OCIEN) { - ptimer_run(s->timer_cmp, 0); - } else { - ptimer_stop(s->timer_cmp); - } - } else if (!(s->cr & CR_EN)) { - /* stop both timers */ - ptimer_stop(s->timer_reload); - ptimer_stop(s->timer_cmp); - } else if (s->cr & CR_OCIEN) { - if (!(oldcr & CR_OCIEN)) { - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_cmp, 0); - } - } else { - ptimer_stop(s->timer_cmp); - } - - ptimer_transaction_commit(s->timer_cmp); - ptimer_transaction_commit(s->timer_reload); + imx_epit_write_cr(s, (uint32_t)value); break; - case 1: /* SR - ACK*/ - /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */ - if (value & SR_OCIF) { - s->sr = 0; /* SR.OCIF is the only bit in this register anyway */ - imx_epit_update_int(s); - } + case 1: /* SR */ + imx_epit_write_sr(s, (uint32_t)value); break; - case 2: /* LR - set ticks */ - s->lr = value; - - ptimer_transaction_begin(s->timer_cmp); - ptimer_transaction_begin(s->timer_reload); - if (s->cr & CR_RLD) { - /* Also set the limit if the LRD bit is set */ - /* If IOVW bit is set then set the timer value */ - ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW); - ptimer_set_limit(s->timer_cmp, s->lr, 0); - } else if (s->cr & CR_IOVW) { - /* If IOVW bit is set then set the timer value */ - ptimer_set_count(s->timer_reload, s->lr); - } - /* - * Commit the change to s->timer_reload, so it can propagate. Otherwise - * the timer interrupt may not fire properly. The commit must happen - * before calling imx_epit_reload_compare_timer(), which reads - * s->timer_reload internally again. - */ - ptimer_transaction_commit(s->timer_reload); - imx_epit_reload_compare_timer(s); - ptimer_transaction_commit(s->timer_cmp); + case 2: /* LR */ + imx_epit_write_lr(s, (uint32_t)value); break; case 3: /* CMP */ - s->cmp = value; - - ptimer_transaction_begin(s->timer_cmp); - imx_epit_reload_compare_timer(s); - ptimer_transaction_commit(s->timer_cmp); - + imx_epit_write_cmp(s, (uint32_t)value); break; default: qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset); - break; } } + static void imx_epit_cmp(void *opaque) { IMXEPITState *s = IMX_EPIT(opaque); -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> The CNT register is a read-only register. There is no need to store it's value, it can be calculated on demand. The calculated frequency is needed temporarily only. Note that this is a migration compatibility break for all boards types that use the EPIT peripheral. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_epit.h | 2 - hw/timer/imx_epit.c | 73 ++++++++++++++----------------------- 2 files changed, 28 insertions(+), 47 deletions(-) diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_epit.h +++ b/include/hw/timer/imx_epit.h @@ -XXX,XX +XXX,XX @@ struct IMXEPITState { uint32_t sr; uint32_t lr; uint32_t cmp; - uint32_t cnt; - uint32_t freq; qemu_irq irq; }; diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_update_int(IMXEPITState *s) } } -/* - * Must be called from within a ptimer_transaction_begin/commit block - * for both s->timer_cmp and s->timer_reload. - */ -static void imx_epit_set_freq(IMXEPITState *s) +static uint32_t imx_epit_get_freq(IMXEPITState *s) { - uint32_t clksrc; - uint32_t prescaler; - - clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS); - prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS); - - s->freq = imx_ccm_get_clock_frequency(s->ccm, - imx_epit_clocks[clksrc]) / prescaler; - - DPRINTF("Setting ptimer frequency to %u\n", s->freq); - - if (s->freq) { - ptimer_set_freq(s->timer_reload, s->freq); - ptimer_set_freq(s->timer_cmp, s->freq); - } + uint32_t clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS); + uint32_t prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS); + uint32_t f_in = imx_ccm_get_clock_frequency(s->ccm, imx_epit_clocks[clksrc]); + uint32_t freq = f_in / prescaler; + DPRINTF("ptimer frequency is %u\n", freq); + return freq; } /* @@ -XXX,XX +XXX,XX @@ static void imx_epit_reset(IMXEPITState *s, bool is_hard_reset) s->sr = 0; s->lr = EPIT_TIMER_MAX; s->cmp = 0; - s->cnt = 0; ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); - /* stop both timers */ + + /* + * The reset switches off the input clock, so even if the CR.EN is still + * set, the timers are no longer running. + */ + assert(imx_epit_get_freq(s) == 0); ptimer_stop(s->timer_cmp); ptimer_stop(s->timer_reload); - /* compute new frequency */ - imx_epit_set_freq(s); /* init both timers to EPIT_TIMER_MAX */ ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); - if (s->freq && (s->cr & CR_EN)) { - /* if the timer is still enabled, restart it */ - ptimer_run(s->timer_reload, 0); - } ptimer_transaction_commit(s->timer_cmp); ptimer_transaction_commit(s->timer_reload); } -static uint32_t imx_epit_update_count(IMXEPITState *s) -{ - s->cnt = ptimer_get_count(s->timer_reload); - - return s->cnt; -} - static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) { IMXEPITState *s = IMX_EPIT(opaque); @@ -XXX,XX +XXX,XX @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) break; case 4: /* CNT */ - imx_epit_update_count(s); - reg_value = s->cnt; + reg_value = ptimer_get_count(s->timer_reload); break; default: @@ -XXX,XX +XXX,XX @@ static void imx_epit_reload_compare_timer(IMXEPITState *s) { if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) { /* if the compare feature is on and timers are running */ - uint32_t tmp = imx_epit_update_count(s); + uint32_t tmp = ptimer_get_count(s->timer_reload); uint64_t next; if (tmp > s->cmp) { /* It'll fire in this round of the timer */ @@ -XXX,XX +XXX,XX @@ static void imx_epit_reload_compare_timer(IMXEPITState *s) static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) { + uint32_t freq = 0; uint32_t oldcr = s->cr; s->cr = value & 0x03ffffff; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); - /* Update the frequency. Has been done already in case of a reset. */ + /* + * Update the frequency. In case of a reset the input clock was + * switched off, so this can be skipped. + */ if (!(s->cr & CR_SWR)) { - imx_epit_set_freq(s); + freq = imx_epit_get_freq(s); + if (freq) { + ptimer_set_freq(s->timer_reload, freq); + ptimer_set_freq(s->timer_cmp, freq); + } } - if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { + if (freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { if (s->cr & CR_ENMOD) { if (s->cr & CR_RLD) { ptimer_set_limit(s->timer_reload, s->lr, 1); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps imx_epit_ops = { static const VMStateDescription vmstate_imx_timer_epit = { .name = TYPE_IMX_EPIT, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (VMStateField[]) { VMSTATE_UINT32(cr, IMXEPITState), VMSTATE_UINT32(sr, IMXEPITState), VMSTATE_UINT32(lr, IMXEPITState), VMSTATE_UINT32(cmp, IMXEPITState), - VMSTATE_UINT32(cnt, IMXEPITState), - VMSTATE_UINT32(freq, IMXEPITState), VMSTATE_PTIMER(timer_reload, IMXEPITState), VMSTATE_PTIMER(timer_cmp, IMXEPITState), VMSTATE_END_OF_LIST() -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> - fix #1263 for CR writes - rework compare time handling - The compare timer has to run even if CR.OCIEN is not set, as SR.OCIF must be updated. - The compare timer fires exactly once when the compare value is less than the current value, but the reload values is less than the compare value. - The compare timer will never fire if the reload value is less than the compare value. Disable it in this case. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> [PMM: fixed minor style nits] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 192 ++++++++++++++++++++++++++------------------ 1 file changed, 116 insertions(+), 76 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Axel Heider * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) return reg_value; } -/* Must be called from ptimer_transaction_begin/commit block for s->timer_cmp */ -static void imx_epit_reload_compare_timer(IMXEPITState *s) +/* + * Must be called from a ptimer_transaction_begin/commit block for + * s->timer_cmp, but outside of a transaction block of s->timer_reload, + * so the proper counter value is read. + */ +static void imx_epit_update_compare_timer(IMXEPITState *s) { - if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) { - /* if the compare feature is on and timers are running */ - uint32_t tmp = ptimer_get_count(s->timer_reload); - uint64_t next; - if (tmp > s->cmp) { - /* It'll fire in this round of the timer */ - next = tmp - s->cmp; - } else { /* catch it next time around */ - next = tmp - s->cmp + ((s->cr & CR_RLD) ? EPIT_TIMER_MAX : s->lr); + uint64_t counter = 0; + bool is_oneshot = false; + /* + * The compare timer only has to run if the timer peripheral is active + * and there is an input clock, Otherwise it can be switched off. + */ + bool is_active = (s->cr & CR_EN) && imx_epit_get_freq(s); + if (is_active) { + /* + * Calculate next timeout for compare timer. Reading the reload + * counter returns proper results only if pending transactions + * on it are committed here. Otherwise stale values are be read. + */ + counter = ptimer_get_count(s->timer_reload); + uint64_t limit = ptimer_get_limit(s->timer_cmp); + /* + * The compare timer is a periodic timer if the limit is at least + * the compare value. Otherwise it may fire at most once in the + * current round. + */ + bool is_oneshot = (limit >= s->cmp); + if (counter >= s->cmp) { + /* The compare timer fires in the current round. */ + counter -= s->cmp; + } else if (!is_oneshot) { + /* + * The compare timer fires after a reload, as it is below the + * compare value already in this round. Note that the counter + * value calculated below can be above the 32-bit limit, which + * is legal here because the compare timer is an internal + * helper ptimer only. + */ + counter += limit - s->cmp; + } else { + /* + * The compare timer won't fire in this round, and the limit is + * set to a value below the compare value. This practically means + * it will never fire, so it can be switched off. + */ + is_active = false; } - ptimer_set_count(s->timer_cmp, next); } + + /* + * Set the compare timer and let it run, or stop it. This is agnostic + * of CR.OCIEN bit, as this bit affects interrupt generation only. The + * compare timer needs to run even if no interrupts are to be generated, + * because the SR.OCIF bit must be updated also. + * Note that the timer might already be stopped or be running with + * counter values. However, finding out when an update is needed and + * when not is not trivial. It's much easier applying the setting again, + * as this does not harm either and the overhead is negligible. + */ + if (is_active) { + ptimer_set_count(s->timer_cmp, counter); + ptimer_run(s->timer_cmp, is_oneshot ? 1 : 0); + } else { + ptimer_stop(s->timer_cmp); + } + } static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) { - uint32_t freq = 0; uint32_t oldcr = s->cr; s->cr = value & 0x03ffffff; if (s->cr & CR_SWR) { - /* handle the reset */ + /* + * Reset clears CR.SWR again. It does not touch CR.EN, but the timers + * are still stopped because the input clock is disabled. + */ imx_epit_reset(s, false); + } else { + uint32_t freq; + uint32_t toggled_cr_bits = oldcr ^ s->cr; + /* re-initialize the limits if CR.RLD has changed */ + bool set_limit = toggled_cr_bits & CR_RLD; + /* set the counter if the timer got just enabled and CR.ENMOD is set */ + bool is_switched_on = (toggled_cr_bits & s->cr) & CR_EN; + bool set_counter = is_switched_on && (s->cr & CR_ENMOD); + + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); + freq = imx_epit_get_freq(s); + if (freq) { + ptimer_set_freq(s->timer_reload, freq); + ptimer_set_freq(s->timer_cmp, freq); + } + + if (set_limit || set_counter) { + uint64_t limit = (s->cr & CR_RLD) ? s->lr : EPIT_TIMER_MAX; + ptimer_set_limit(s->timer_reload, limit, set_counter ? 1 : 0); + if (set_limit) { + ptimer_set_limit(s->timer_cmp, limit, 0); + } + } + /* + * If there is an input clock and the peripheral is enabled, then + * ensure the wall clock timer is ticking. Otherwise stop the timers. + * The compare timer will be updated later. + */ + if (freq && (s->cr & CR_EN)) { + ptimer_run(s->timer_reload, 0); + } else { + ptimer_stop(s->timer_reload); + } + /* Commit changes to reload timer, so they can propagate. */ + ptimer_transaction_commit(s->timer_reload); + /* Update compare timer based on the committed reload timer value. */ + imx_epit_update_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); } /* @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) * - write to CR.EN or CR.OCIE */ imx_epit_update_int(s); - - /* - * TODO: could we 'break' here for reset? following operations appear - * to duplicate the work imx_epit_reset() already did. - */ - - ptimer_transaction_begin(s->timer_cmp); - ptimer_transaction_begin(s->timer_reload); - - /* - * Update the frequency. In case of a reset the input clock was - * switched off, so this can be skipped. - */ - if (!(s->cr & CR_SWR)) { - freq = imx_epit_get_freq(s); - if (freq) { - ptimer_set_freq(s->timer_reload, freq); - ptimer_set_freq(s->timer_cmp, freq); - } - } - - if (freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { - if (s->cr & CR_ENMOD) { - if (s->cr & CR_RLD) { - ptimer_set_limit(s->timer_reload, s->lr, 1); - ptimer_set_limit(s->timer_cmp, s->lr, 1); - } else { - ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); - ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); - } - } - - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_reload, 0); - if (s->cr & CR_OCIEN) { - ptimer_run(s->timer_cmp, 0); - } else { - ptimer_stop(s->timer_cmp); - } - } else if (!(s->cr & CR_EN)) { - /* stop both timers */ - ptimer_stop(s->timer_reload); - ptimer_stop(s->timer_cmp); - } else if (s->cr & CR_OCIEN) { - if (!(oldcr & CR_OCIEN)) { - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_cmp, 0); - } - } else { - ptimer_stop(s->timer_cmp); - } - - ptimer_transaction_commit(s->timer_cmp); - ptimer_transaction_commit(s->timer_reload); } static void imx_epit_write_sr(IMXEPITState *s, uint32_t value) @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_lr(IMXEPITState *s, uint32_t value) /* If IOVW bit is set then set the timer value */ ptimer_set_count(s->timer_reload, s->lr); } - /* - * Commit the change to s->timer_reload, so it can propagate. Otherwise - * the timer interrupt may not fire properly. The commit must happen - * before calling imx_epit_reload_compare_timer(), which reads - * s->timer_reload internally again. - */ + /* Commit the changes to s->timer_reload, so they can propagate. */ ptimer_transaction_commit(s->timer_reload); - imx_epit_reload_compare_timer(s); + /* Update the compare timer based on the committed reload timer value. */ + imx_epit_update_compare_timer(s); ptimer_transaction_commit(s->timer_cmp); } @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_cmp(IMXEPITState *s, uint32_t value) { s->cmp = value; + /* Update the compare timer based on the committed reload timer value. */ ptimer_transaction_begin(s->timer_cmp); - imx_epit_reload_compare_timer(s); + imx_epit_update_compare_timer(s); ptimer_transaction_commit(s->timer_cmp); } @@ -XXX,XX +XXX,XX @@ static void imx_epit_cmp(void *opaque) { IMXEPITState *s = IMX_EPIT(opaque); + /* The cmp ptimer can't be running when the peripheral is disabled */ + assert(s->cr & CR_EN); + DPRINTF("sr was %d\n", s->sr); /* Set interrupt status bit SR.OCIF and update the interrupt state */ s->sr |= SR_OCIF; -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Fix these: WARNING: Block comments use a leading /* on a separate line WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-2-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 323 +++++++++++++++++++++++++++++--------------- 1 file changed, 215 insertions(+), 108 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri) static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t v) { - /* Raw write of a coprocessor register (as needed for migration, etc). + /* + * Raw write of a coprocessor register (as needed for migration, etc). * Note that constant registers are treated as write-ignored; the * caller should check for success by whether a readback gives the * value written. @@ -XXX,XX +XXX,XX @@ static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri, static bool raw_accessors_invalid(const ARMCPRegInfo *ri) { - /* Return true if the regdef would cause an assertion if you called + /* + * Return true if the regdef would cause an assertion if you called * read_raw_cp_reg() or write_raw_cp_reg() on it (ie if it is a * program bug for it not to have the NO_RAW flag). * NB that returning false here doesn't necessarily mean that calling @@ -XXX,XX +XXX,XX @@ bool write_list_to_cpustate(ARMCPU *cpu) if (ri->type & ARM_CP_NO_RAW) { continue; } - /* Write value and confirm it reads back as written + /* + * Write value and confirm it reads back as written * (to catch read-only registers and partially read-only * registers where the incoming migration value doesn't match) */ @@ -XXX,XX +XXX,XX @@ static gint cpreg_key_compare(gconstpointer a, gconstpointer b) void init_cpreg_list(ARMCPU *cpu) { - /* Initialise the cpreg_tuples[] array based on the cp_regs hash. + /* + * Initialise the cpreg_tuples[] array based on the cp_regs hash. * Note that we require cpreg_tuples[] to be sorted by key ID. */ GList *keys; @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_el3_aa32ns(CPUARMState *env, return CP_ACCESS_OK; } -/* Some secure-only AArch32 registers trap to EL3 if used from +/* + * Some secure-only AArch32 registers trap to EL3 if used from * Secure EL1 (but are just ordinary UNDEF in other non-EL3 contexts). * Note that an access from Secure EL1 can only happen if EL3 is AArch64. * We assume that the .access field is set to PL1_RW. @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_trap_aa32s_el1(CPUARMState *env, return CP_ACCESS_TRAP_UNCATEGORIZED; } -/* Check for traps to performance monitor registers, which are controlled +/* + * Check for traps to performance monitor registers, which are controlled * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3. */ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void fcse_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) ARMCPU *cpu = env_archcpu(env); if (raw_read(env, ri) != value) { - /* Unlike real hardware the qemu TLB uses virtual addresses, + /* + * Unlike real hardware the qemu TLB uses virtual addresses, * not modified virtual addresses, so this causes a TLB flush. */ tlb_flush(CPU(cpu)); @@ -XXX,XX +XXX,XX @@ static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri, if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA) && !extended_addresses_enabled(env)) { - /* For VMSA (when not using the LPAE long descriptor page table + /* + * For VMSA (when not using the LPAE long descriptor page table * format) this register includes the ASID, so do a TLB flush. * For PMSA it is purely a process ID and no action is needed. */ @@ -XXX,XX +XXX,XX @@ static void tlbiipas2is_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, } static const ARMCPRegInfo cp_reginfo[] = { - /* Define the secure and non-secure FCSE identifier CP registers + /* + * Define the secure and non-secure FCSE identifier CP registers * separately because there is no secure bank in V8 (no _EL3). This allows * the secure register to be properly reset and migrated. There is also no * v8 EL1 version of the register so the non-secure instance stands alone. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { .access = PL1_RW, .secure = ARM_CP_SECSTATE_S, .fieldoffset = offsetof(CPUARMState, cp15.fcseidr_s), .resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, }, - /* Define the secure and non-secure context identifier CP registers + /* + * Define the secure and non-secure context identifier CP registers * separately because there is no secure bank in V8 (no _EL3). This allows * the secure register to be properly reset and migrated. In the * non-secure case, the 32-bit register will have reset and migration @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { }; static const ARMCPRegInfo not_v8_cp_reginfo[] = { - /* NB: Some of these registers exist in v8 but with more precise + /* + * NB: Some of these registers exist in v8 but with more precise * definitions that don't use CP_ANY wildcards (mostly in v8_cp_reginfo[]). */ /* MMU Domain access control / MPU write buffer control */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, - /* ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs. + /* + * ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs. * For v6 and v5, these mappings are overly broad. */ { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { }; static const ARMCPRegInfo not_v6_cp_reginfo[] = { - /* Not all pre-v6 cores implemented this WFI, so this is slightly + /* + * Not all pre-v6 cores implemented this WFI, so this is slightly * over-broad. */ { .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v6_cp_reginfo[] = { }; static const ARMCPRegInfo not_v7_cp_reginfo[] = { - /* Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which + /* + * Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which * is UNPREDICTABLE; we choose to NOP as most implementations do). */ { .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, .access = PL1_W, .type = ARM_CP_WFI }, - /* L1 cache lockdown. Not architectural in v6 and earlier but in practice + /* + * L1 cache lockdown. Not architectural in v6 and earlier but in practice * implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and * OMAPCP will override this space. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v7_cp_reginfo[] = { { .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY, .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, .resetvalue = 0 }, - /* We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR; + /* + * We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR; * implementing it as RAZ means the "debug architecture version" bits * will read as a reserved value, which should cause Linux to not try * to use the debug hardware. */ { .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* MMU TLB control. Note that the wildcarding means we cover not just + /* + * MMU TLB control. Note that the wildcarding means we cover not just * the unified TLB ops but also the dside/iside/inner-shareable variants. */ { .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY, @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* In ARMv8 most bits of CPACR_EL1 are RES0. */ if (!arm_feature(env, ARM_FEATURE_V8)) { - /* ARMv7 defines bits for unimplemented coprocessors as RAZ/WI. + /* + * ARMv7 defines bits for unimplemented coprocessors as RAZ/WI. * ASEDIS [31] and D32DIS [30] are both UNK/SBZP without VFP. * TRCDIS [28] is RAZ/WI since we do not implement a trace macrocell. */ @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, value |= R_CPACR_ASEDIS_MASK; } - /* VFPv3 and upwards with NEON implement 32 double precision + /* + * VFPv3 and upwards with NEON implement 32 double precision * registers (D0-D31). */ if (!cpu_isar_feature(aa32_simd_r32, env_archcpu(env))) { @@ -XXX,XX +XXX,XX @@ static uint64_t cpacr_read(CPUARMState *env, const ARMCPRegInfo *ri) static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri) { - /* Call cpacr_write() so that we reset with the correct RAO bits set + /* + * Call cpacr_write() so that we reset with the correct RAO bits set * for our CPU features. */ cpacr_write(env, ri, 0); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "MVA_prefetch", .cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1, .access = PL1_W, .type = ARM_CP_NOP }, - /* We need to break the TB after ISB to execute self-modifying code + /* + * We need to break the TB after ISB to execute self-modifying code * correctly and also to take any pending interrupts immediately. * So use arm_cp_write_ignore() function instead of ARM_CP_NOP flag. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s), offsetof(CPUARMState, cp15.ifar_ns) }, .resetvalue = 0, }, - /* Watchpoint Fault Address Register : should actually only be present + /* + * Watchpoint Fault Address Register : should actually only be present * for 1136, 1176, 11MPCore. */ { .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static bool event_supported(uint16_t number) static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* Performance monitor registers user accessibility is controlled + /* + * Performance monitor registers user accessibility is controlled * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable * trapping to EL2 or EL3 for other accesses. */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult pmreg_access_ccntr(CPUARMState *env, (MDCR_HPME | MDCR_HPMD | MDCR_HPMN | MDCR_HCCD | MDCR_HLP) #define MDCR_EL3_PMU_ENABLE_BITS (MDCR_SPME | MDCR_SCCD) -/* Returns true if the counter (pass 31 for PMCCNTR) should count events using +/* + * Returns true if the counter (pass 31 for PMCCNTR) should count events using * the current EL, security state, and register configuration. */ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) @@ -XXX,XX +XXX,XX @@ static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri) static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and + /* + * The value of PMSELR.SEL affects the behavior of PMXEVTYPER and * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are * accessed. @@ -XXX,XX +XXX,XX @@ static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.c14_pmevtyper[counter] = value & PMXEVTYPER_MASK; pmevcntr_op_finish(env, counter); } - /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when + /* + * Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when * PMSELR value is equal to or greater than the number of implemented * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pmevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri, } return ret; } else { - /* We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR - * are CONSTRAINED UNPREDICTABLE. */ + /* + * We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR + * are CONSTRAINED UNPREDICTABLE. + */ return 0; } } @@ -XXX,XX +XXX,XX @@ static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Note that even though the AArch64 view of this register has bits + /* + * Note that even though the AArch64 view of this register has bits * [10:0] all RES0 we can only mask the bottom 5, to comply with the * architectural requirements for bits which are RES0 only in some * contexts. (ARMv8 would permit us to do no masking at all, but ARMv7 @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (!arm_feature(env, ARM_FEATURE_EL2)) { valid_mask &= ~SCR_HCE; - /* On ARMv7, SMD (or SCD as it is called in v7) is only + /* + * On ARMv7, SMD (or SCD as it is called in v7) is only * supported if EL2 exists. The bit is UNK/SBZP when * EL2 is unavailable. In QEMU ARMv7, we force it to always zero * when EL2 is unavailable. @@ -XXX,XX +XXX,XX @@ static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); - /* Acquire the CSSELR index from the bank corresponding to the CCSIDR + /* + * Acquire the CSSELR index from the bank corresponding to the CCSIDR * bank */ uint32_t index = A32_BANKED_REG_GET(env, csselr, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { /* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */ { .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, .access = PL1_W, .type = ARM_CP_NOP }, - /* Performance monitors are implementation defined in v7, + /* + * Performance monitors are implementation defined in v7, * but with an ARM recommended set of registers, which we * follow. * @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .writefn = csselr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s), offsetof(CPUARMState, cp15.csselr_ns) } }, - /* Auxiliary ID register: this actually has an IMPDEF value but for now + /* + * Auxiliary ID register: this actually has an IMPDEF value but for now * just RAZ for all cores: */ { .name = "AIDR", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid1, .resetvalue = 0 }, - /* Auxiliary fault status registers: these also are IMPDEF, and we + /* + * Auxiliary fault status registers: these also are IMPDEF, and we * choose to RAZ/WI for all cores. */ { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* MAIR can just read-as-written because we don't implement caches + /* + * MAIR can just read-as-written because we don't implement caches * and so don't need to care about memory attributes. */ { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0, .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[3]), .resetvalue = 0 }, - /* For non-long-descriptor page tables these are PRRR and NMRR; + /* + * For non-long-descriptor page tables these are PRRR and NMRR; * regardless they still act as reads-as-written for QEMU. */ - /* MAIR0/1 are defined separately from their 64-bit counterpart which + /* + * MAIR0/1 are defined separately from their 64-bit counterpart which * allows them to assign the correct fieldoffset based on the endianness * handled in the field definitions. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero. + /* + * CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero. * Writable only at the highest implemented exception level. */ int el = arm_current_el(env); @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_stimer_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* The AArch64 register view of the secure physical timer is + /* + * The AArch64 register view of the secure physical timer is * always accessible from EL3, and configurably accessible from * Secure EL1. */ @@ -XXX,XX +XXX,XX @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx) ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; if (gt->ctl & 1) { - /* Timer enabled: calculate and set current ISTATUS, irq, and + /* + * Timer enabled: calculate and set current ISTATUS, irq, and * reset timer to when ISTATUS next has to change */ uint64_t offset = timeridx == GTIMER_VIRT ? @@ -XXX,XX +XXX,XX @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx) /* Next transition is when we hit cval */ nexttick = gt->cval + offset; } - /* Note that the desired next expiry time might be beyond the + /* + * Note that the desired next expiry time might be beyond the * signed-64-bit range of a QEMUTimer -- in this case we just * set the timer for as far in the future as possible. When the * timer expires we will reset the timer for any remaining period. @@ -XXX,XX +XXX,XX @@ static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Enable toggled */ gt_recalc_timer(cpu, timeridx); } else if ((oldval ^ value) & 2) { - /* IMASK toggled: don't need to recalculate, + /* + * IMASK toggled: don't need to recalculate, * just set the interrupt line based on ISTATUS */ int irqstate = (oldval & 4) && !(value & 2); @@ -XXX,XX +XXX,XX @@ static void arm_gt_cntfrq_reset(CPUARMState *env, const ARMCPRegInfo *opaque) } static const ARMCPRegInfo generic_timer_cp_reginfo[] = { - /* Note that CNTFRQ is purely reads-as-written for the benefit + /* + * Note that CNTFRQ is purely reads-as-written for the benefit * of software; writing it doesn't actually change the timer frequency. * Our reset value matches the fixed frequency we implement the timer at. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = { .readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read, .writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write, }, - /* Secure timer -- this is actually restricted to only EL3 + /* + * Secure timer -- this is actually restricted to only EL3 * and configurably Secure-EL1 via the accessfn. */ { .name = "CNTPS_TVAL_EL1", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, #else -/* In user-mode most of the generic timer registers are inaccessible +/* + * In user-mode most of the generic timer registers are inaccessible * however modern kernels (4.12+) allow access to cntvct_el0 */ @@ -XXX,XX +XXX,XX @@ static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); - /* Currently we have no support for QEMUTimer in linux-user so we + /* + * Currently we have no support for QEMUTimer in linux-user so we * can't call gt_get_countervalue(env), instead we directly * call the lower level functions. */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (ri->opc2 & 4) { - /* The ATS12NSO* operations must trap to EL3 or EL2 if executed in + /* + * The ATS12NSO* operations must trap to EL3 or EL2 if executed in * Secure EL1 (which can only happen if EL3 is AArch64). * They are simply UNDEF if executed from NS EL1. * They function normally from EL2 or EL3. @@ -XXX,XX +XXX,XX @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value, } } } else { - /* fsr is a DFSR/IFSR value for the short descriptor + /* + * fsr is a DFSR/IFSR value for the short descriptor * translation table format (with WnR always clear). * Convert it to a 32-bit PAR. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pmsav8r_cp_reginfo[] = { }; static const ARMCPRegInfo pmsav7_cp_reginfo[] = { - /* Reset for all these registers is handled in arm_cpu_reset(), + /* + * Reset for all these registers is handled in arm_cpu_reset(), * because the PMSAv7 is also used by M-profile CPUs, which do * not register cpregs but still need the state to be reset. */ @@ -XXX,XX +XXX,XX @@ static void vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri, } if (arm_feature(env, ARM_FEATURE_LPAE)) { - /* With LPAE the TTBCR could result in a change of ASID + /* + * With LPAE the TTBCR could result in a change of ASID * via the TTBCR.A1 bit, so do a TLB flush. */ tlb_flush(CPU(cpu)); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { offsetoflow32(CPUARMState, cp15.tcr_el[1])} }, }; -/* Note that unlike TTBCR, writing to TTBCR2 does not require flushing +/* + * Note that unlike TTBCR, writing to TTBCR2 does not require flushing * qemu tlbs nor adjusting cached masks. */ static const ARMCPRegInfo ttbcr2_reginfo = { @@ -XXX,XX +XXX,XX @@ static void omap_wfi_write(CPUARMState *env, const ARMCPRegInfo *ri, static void omap_cachemaint_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* On OMAP there are registers indicating the max/min index of dcache lines + /* + * On OMAP there are registers indicating the max/min index of dcache lines * containing a dirty line; cache flush operations have to reset these. */ env->cp15.c15_i_max = 0x000; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo omap_cp_reginfo[] = { .crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW, .type = ARM_CP_NO_RAW, .readfn = arm_cp_read_zero, .writefn = omap_wfi_write, }, - /* TODO: Peripheral port remap register: + /* + * TODO: Peripheral port remap register: * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller * base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff), * when MMU is off. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo xscale_cp_reginfo[] = { .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr), .resetvalue = 0, }, - /* XScale specific cache-lockdown: since we have no cache we NOP these + /* + * XScale specific cache-lockdown: since we have no cache we NOP these * and hope the guest does not really rely on cache behaviour. */ { .name = "XSCALE_LOCK_ICACHE_LINE", @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo xscale_cp_reginfo[] = { }; static const ARMCPRegInfo dummy_c15_cp_reginfo[] = { - /* RAZ/WI the whole crn=15 space, when we don't have a more specific + /* + * RAZ/WI the whole crn=15 space, when we don't have a more specific * implementation of this implementation-defined space. * Ideally this should eventually disappear in favour of actually * implementing the correct behaviour for all cores. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { }; static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { - /* The cache test-and-clean instructions always return (1 << 30) + /* + * The cache test-and-clean instructions always return (1 << 30) * to indicate that there are no dirty cache lines. */ { .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3, @@ -XXX,XX +XXX,XX @@ static uint64_t mpidr_read_val(CPUARMState *env) if (arm_feature(env, ARM_FEATURE_V7MP)) { mpidr |= (1U << 31); - /* Cores which are uniprocessor (non-coherent) + /* + * Cores which are uniprocessor (non-coherent) * but still implement the MP extensions set * bit 30. (For instance, Cortex-R5). */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tocu(CPUARMState *env, const ARMCPRegInfo *ri, return do_cacheop_pou_access(env, HCR_TOCU | HCR_TPU); } -/* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions +/* + * See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Invalidate by VA, EL2 + /* + * Invalidate by VA, EL2 * Currently handles both VAE2 and VALE2, since we don't support * flush-last-level-only. */ @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Invalidate by VA, EL3 + /* + * Invalidate by VA, EL3 * Currently handles both VAE3 and VALE3, since we don't support * flush-last-level-only. */ @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Invalidate by VA, EL1&0 (AArch64 version). + /* + * Invalidate by VA, EL1&0 (AArch64 version). * Currently handles all of VAE1, VAAE1, VAALE1 and VALE1, * since we don't support flush-for-specific-ASID-only or * flush-last-level-only. @@ -XXX,XX +XXX,XX @@ static CPAccessResult sp_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (!(env->pstate & PSTATE_SP)) { - /* Access to SP_EL0 is undefined if it's being used as + /* + * Access to SP_EL0 is undefined if it's being used as * the stack pointer. */ return CP_ACCESS_TRAP_UNCATEGORIZED; @@ -XXX,XX +XXX,XX @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, } if (raw_read(env, ri) == value) { - /* Skip the TLB flush if nothing actually changed; Linux likes + /* + * Skip the TLB flush if nothing actually changed; Linux likes * to do a lot of pointless SCTLR writes. */ return; @@ -XXX,XX +XXX,XX @@ static void mdcr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri, } static const ARMCPRegInfo v8_cp_reginfo[] = { - /* Minimal set of EL0-visible registers. This will need to be expanded + /* + * Minimal set of EL0-visible registers. This will need to be expanded * significantly for system emulation of AArch64 CPUs. */ { .name = "NZCV", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 0, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_SVC]) }, - /* We rely on the access checks not allowing the guest to write to the + /* + * We rely on the access checks not allowing the guest to write to the * state field when SPSel indicates that it's being used as the stack * pointer. */ @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (arm_feature(env, ARM_FEATURE_EL3)) { valid_mask &= ~HCR_HCD; } else if (cpu->psci_conduit != QEMU_PSCI_CONDUIT_SMC) { - /* Architecturally HCR.TSC is RES0 if EL3 is not implemented. + /* + * Architecturally HCR.TSC is RES0 if EL3 is not implemented. * However, if we're using the SMC PSCI conduit then QEMU is * effectively acting like EL3 firmware and so the guest at * EL2 should retain the ability to prevent EL1 from being @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, #ifndef CONFIG_USER_ONLY - /* Unlike the other EL2-related AT operations, these must + /* + * Unlike the other EL2-related AT operations, these must * UNDEF from EL3 if EL2 is not implemented, which is why we * define them here rather than with the rest of the AT ops. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .access = PL2_W, .accessfn = at_s1e2_access, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = ats_write64 }, - /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE + /* + * The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3 * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose * to behave as if SCR.NS was 1. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, - /* ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the + /* + * ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the * reset values as IMPDEF. We choose to reset to 3 to comply with * both ARMv7 and ARMv8. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_sec_cp_reginfo[] = { static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* The NSACR is RW at EL3, and RO for NS EL1 and NS EL2. + /* + * The NSACR is RW at EL3, and RO for NS EL1 and NS EL2. * At Secure EL1 it traps to EL3 or EL2. */ if (arm_current_el(env) == 3) { @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } -/* We don't know until after realize whether there's a GICv3 +/* + * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. * So we have to fill in the GIC fields in ID_PFR/ID_PFR1_EL1/ID_AA64PFR0_EL1 * at runtime. @@ -XXX,XX +XXX,XX @@ static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) } #endif -/* Shared logic between LORID and the rest of the LOR* registers. +/* + * Shared logic between LORID and the rest of the LOR* registers. * Secure state exclusion has already been dealt with. */ static CPAccessResult access_lor_ns(CPUARMState *env, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, cp_reginfo); if (!arm_feature(env, ARM_FEATURE_V8)) { - /* Must go early as it is full of wildcards that may be + /* + * Must go early as it is full of wildcards that may be * overridden by later definitions. */ define_arm_cp_regs(cpu, not_v8_cp_reginfo); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa32_tid3, .resetvalue = cpu->isar.id_pfr0 }, - /* ID_PFR1 is not a plain ARM_CP_CONST because we don't know + /* + * ID_PFR1 is not a plain ARM_CP_CONST because we don't know * the value of the GIC field until after we define these regs. */ { .name = "ID_PFR1", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, el3_regs); } - /* The behaviour of NSACR is sufficiently various that we don't + /* + * The behaviour of NSACR is sufficiently various that we don't * try to describe it in a single reginfo: * if EL3 is 64 bit, then trap to EL3 from S EL1, * reads as constant 0xc00 from NS EL1 and NS EL2 @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa32_jazelle, cpu)) { define_arm_cp_regs(cpu, jazelle_regs); } - /* Slightly awkwardly, the OMAP and StrongARM cores need all of + /* + * Slightly awkwardly, the OMAP and StrongARM cores need all of * cp15 crn=0 to be writes-ignored, whereas for other cores they should * be read-only (ie write causes UNDEF exception). */ { ARMCPRegInfo id_pre_v8_midr_cp_reginfo[] = { - /* Pre-v8 MIDR space. + /* + * Pre-v8 MIDR space. * Note that the MIDR isn't a simple constant register because * of the TI925 behaviour where writes to another register can * cause the MIDR value to change. @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (arm_feature(env, ARM_FEATURE_OMAPCP) || arm_feature(env, ARM_FEATURE_STRONGARM)) { size_t i; - /* Register the blanket "writes ignored" value first to cover the + /* + * Register the blanket "writes ignored" value first to cover the * whole space. Then update the specific ID registers to allow write * access, so that they ignore writes rather than causing them to * UNDEF. @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .raw_writefn = raw_write, }; if (arm_feature(env, ARM_FEATURE_XSCALE)) { - /* Normally we would always end the TB on an SCTLR write, but Linux + /* + * Normally we would always end the TB on an SCTLR write, but Linux * arch/arm/mach-pxa/sleep.S expects two instructions following * an MMU enable to execute from cache. Imitate this behaviour. */ @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, const ARMCPRegInfo *r, void *opaque) { - /* Define implementations of coprocessor registers. + /* + * Define implementations of coprocessor registers. * We store these in a hashtable because typically * there are less than 150 registers in a space which * is 16*16*16*8*8 = 262144 in size. @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, default: g_assert_not_reached(); } - /* The AArch64 pseudocode CheckSystemAccess() specifies that op1 + /* + * The AArch64 pseudocode CheckSystemAccess() specifies that op1 * encodes a minimum access level for the register. We roll this * runtime check into our general permission check code, so check * here that the reginfo's specified permissions are strict enough @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, assert((r->access & ~mask) == 0); } - /* Check that the register definition has enough info to handle + /* + * Check that the register definition has enough info to handle * reads and writes if they are permitted. */ if (!(r->type & (ARM_CP_SPECIAL_MASK | ARM_CP_CONST))) { @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, continue; } if (state == ARM_CP_STATE_AA32) { - /* Under AArch32 CP registers can be common + /* + * Under AArch32 CP registers can be common * (same for secure and non-secure world) or banked. */ char *name; @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, g_assert_not_reached(); } } else { - /* AArch64 registers get mapped to non-secure instance - * of AArch32 */ + /* + * AArch64 registers get mapped to non-secure instance + * of AArch32 + */ add_cpreg_to_hashtable(cpu, r, opaque, state, ARM_CP_SECSTATE_NS, crm, opc1, opc2, r->name); @@ -XXX,XX +XXX,XX @@ void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque) static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) { - /* Return true if it is not valid for us to switch to + /* + * Return true if it is not valid for us to switch to * this CPU mode (ie all the UNPREDICTABLE cases in * the ARM ARM CPSRWriteByInstr pseudocode). */ @@ -XXX,XX +XXX,XX @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) case ARM_CPU_MODE_UND: case ARM_CPU_MODE_IRQ: case ARM_CPU_MODE_FIQ: - /* Note that we don't implement the IMPDEF NSACR.RFR which in v7 + /* + * Note that we don't implement the IMPDEF NSACR.RFR which in v7 * allows FIQ mode to be Secure-only. (In v8 this doesn't exist.) */ - /* If HCR.TGE is set then changes from Monitor to NS PL1 via MSR + /* + * If HCR.TGE is set then changes from Monitor to NS PL1 via MSR * and CPS are treated as illegal mode changes. */ if (write_type == CPSRWriteByInstr && @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, env->GE = (val >> 16) & 0xf; } - /* In a V7 implementation that includes the security extensions but does + /* + * In a V7 implementation that includes the security extensions but does * not include Virtualization Extensions the SCR.FW and SCR.AW bits control * whether non-secure software is allowed to change the CPSR_F and CPSR_A * bits respectively. @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, changed_daif = (env->daif ^ val) & mask; if (changed_daif & CPSR_A) { - /* Check to see if we are allowed to change the masking of async + /* + * Check to see if we are allowed to change the masking of async * abort exceptions from a non-secure state. */ if (!(env->cp15.scr_el3 & SCR_AW)) { @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, } if (changed_daif & CPSR_F) { - /* Check to see if we are allowed to change the masking of FIQ + /* + * Check to see if we are allowed to change the masking of FIQ * exceptions from a non-secure state. */ if (!(env->cp15.scr_el3 & SCR_FW)) { @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, mask &= ~CPSR_F; } - /* Check whether non-maskable FIQ (NMFI) support is enabled. + /* + * Check whether non-maskable FIQ (NMFI) support is enabled. * If this bit is set software is not allowed to mask * FIQs, but is allowed to set CPSR_F to 0. */ @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, if (write_type != CPSRWriteRaw && ((env->uncached_cpsr ^ val) & mask & CPSR_M)) { if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR) { - /* Note that we can only get here in USR mode if this is a + /* + * Note that we can only get here in USR mode if this is a * gdb stub write; for this case we follow the architectural * behaviour for guest writes in USR mode of ignoring an attempt * to switch mode. (Those are caught by translate.c for writes @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, */ mask &= ~CPSR_M; } else if (bad_mode_switch(env, val & CPSR_M, write_type)) { - /* Attempt to switch to an invalid mode: this is UNPREDICTABLE in + /* + * Attempt to switch to an invalid mode: this is UNPREDICTABLE in * v7, and has defined behaviour in v8: * + leave CPSR.M untouched * + allow changes to the other CPSR fields @@ -XXX,XX +XXX,XX @@ static void switch_mode(CPUARMState *env, int mode) env->regs[14] = env->banked_r14[r14_bank_number(mode)]; } -/* Physical Interrupt Target EL Lookup Table +/* + * Physical Interrupt Target EL Lookup Table * * [ From ARM ARM section G1.13.4 (Table G1-15) ] * @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, if (arm_feature(env, ARM_FEATURE_EL3)) { rw = ((env->cp15.scr_el3 & SCR_RW) == SCR_RW); } else { - /* Either EL2 is the highest EL (and so the EL2 register width + /* + * Either EL2 is the highest EL (and so the EL2 register width * is given by is64); or there is no EL2 or EL3, in which case * the value of 'rw' does not affect the table lookup anyway. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env) env->banked_r13[bank_number(ARM_CPU_MODE_UND)] = env->xregs[23]; } - /* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ + /* + * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ * mode, then we can copy to r8-r14. Otherwise, we copy to the * FIQ bank for r8-r14. */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) /* High vectors. When enabled, base address cannot be remapped. */ addr += 0xffff0000; } else { - /* ARM v7 architectures provide a vector base address register to remap + /* + * ARM v7 architectures provide a vector base address register to remap * the interrupt vector table. * This register is only followed in non-monitor mode, and is banked. * Note: only bits 31:5 are valid. @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); if (cur_el < new_el) { - /* Entry vector offset depends on whether the implemented EL + /* + * Entry vector offset depends on whether the implemented EL * immediately lower than the target level is using AArch32 or AArch64 */ bool is_aa64; @@ -XXX,XX +XXX,XX @@ static void handle_semihosting(CPUState *cs) } #endif -/* Handle a CPU exception for A and R profile CPUs. +/* + * Handle a CPU exception for A and R profile CPUs. * Do any appropriate logging, handle PSCI calls, and then hand off * to the AArch64-entry or AArch32-entry function depending on the * target exception level's register width. @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) } #endif - /* Hooks may change global state so BQL should be held, also the + /* + * Hooks may change global state so BQL should be held, also the * BQL needs to be held for any modification of * cs->interrupt_request. */ @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, }; } -/* Note that signed overflow is undefined in C. The following routines are - careful to use unsigned types where modulo arithmetic is required. - Failure to do so _will_ break on newer gcc. */ +/* + * Note that signed overflow is undefined in C. The following routines are + * careful to use unsigned types where modulo arithmetic is required. + * Failure to do so _will_ break on newer gcc. + */ /* Signed saturating arithmetic. */ @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b) return (a & mask) | (b & ~mask); } -/* CRC helpers. +/* + * CRC helpers. * The upper bytes of val (above the number specified by 'bytes') must have * been zeroed out by the caller. */ @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(crc32c)(uint32_t acc, uint32_t val, uint32_t bytes) return crc32c(acc, buf, bytes) ^ 0xffffffff; } -/* Return the exception level to which FP-disabled exceptions should +/* + * Return the exception level to which FP-disabled exceptions should * be taken, or 0 if FP is enabled. */ int fp_exception_el(CPUARMState *env, int cur_el) @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) #ifndef CONFIG_USER_ONLY uint64_t hcr_el2; - /* CPACR and the CPTR registers don't exist before v6, so FP is + /* + * CPACR and the CPTR registers don't exist before v6, so FP is * always accessible */ if (!arm_feature(env, ARM_FEATURE_V6)) { @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) hcr_el2 = arm_hcr_el2_eff(env); - /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: + /* + * The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses * 3 : trap no accesses -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Fix the following: ERROR: spaces required around that '|' (ctx:VxV) ERROR: space required before the open parenthesis '(' ERROR: spaces required around that '+' (ctx:VxB) ERROR: space prohibited between function name and open parenthesis '(' (the last two still have some occurrences in macros which I left behind because it might impact readability) Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-3-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_list(gpointer key, gpointer opaque) uint32_t regidx = (uintptr_t)key; const ARMCPRegInfo *ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); - if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { + if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) { cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx); /* The value array need not be initialized at this point */ cpu->cpreg_array_len++; @@ -XXX,XX +XXX,XX @@ static void count_cpreg(gpointer key, gpointer opaque) ri = g_hash_table_lookup(cpu->cp_regs, key); - if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { + if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) { cpu->cpreg_array_len++; } } @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { .resetfn = arm_cp_reset_ignore }, { .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0, - .access = PL0_R|PL1_W, + .access = PL0_R | PL1_W, .fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el[0]), .resetvalue = 0}, { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3, - .access = PL0_R|PL1_W, + .access = PL0_R | PL1_W, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidruro_s), offsetoflow32(CPUARMState, cp15.tpidruro_ns) }, .resetfn = arm_cp_reset_ignore }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { .resetvalue = 0 }, /* The cache ops themselves: these all NOP for QEMU */ { .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0, - .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0, - .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0, - .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1, - .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2, - .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0, - .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, }; static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo cbar = { .name = "CBAR", .cp = 15, .crn = 15, .crm = 0, .opc1 = 4, .opc2 = 0, - .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar, + .access = PL1_R | PL3_W, .resetvalue = cpu->reset_cbar, .fieldoffset = offsetof(CPUARMState, cp15.c15_config_base_address) }; @@ -XXX,XX +XXX,XX @@ static void switch_mode(CPUARMState *env, int mode) return; if (old_mode == ARM_CPU_MODE_FIQ) { - memcpy (env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); - memcpy (env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t)); + memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); + memcpy(env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t)); } else if (mode == ARM_CPU_MODE_FIQ) { - memcpy (env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t)); - memcpy (env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t)); + memcpy(env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t)); + memcpy(env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t)); } i = bank_number(old_mode); @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 16); \ if (sum >= 0) \ ge |= 3 << (n * 2); \ - } while(0) + } while (0) #define SARITH8(a, b, n, op) do { \ int32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 8); \ if (sum >= 0) \ ge |= 1 << n; \ - } while(0) + } while (0) #define ADD16(a, b, n) SARITH16(a, b, n, +) @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 16); \ if ((sum >> 16) == 1) \ ge |= 3 << (n * 2); \ - } while(0) + } while (0) #define ADD8(a, b, n) do { \ uint32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 8); \ if ((sum >> 8) == 1) \ ge |= 1 << n; \ - } while(0) + } while (0) #define SUB16(a, b, n) do { \ uint32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 16); \ if ((sum >> 16) == 0) \ ge |= 3 << (n * 2); \ - } while(0) + } while (0) #define SUB8(a, b, n) do { \ uint32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 8); \ if ((sum >> 8) == 0) \ ge |= 1 << n; \ - } while(0) + } while (0) #define PFX u #define ARITH_GE -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Fix this: ERROR: braces {} are necessary for all arms of this statement Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-4-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 67 ++++++++++++++++++++++++++++----------------- 1 file changed, 42 insertions(+), 25 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, env->CF = (val >> 29) & 1; env->VF = (val << 3) & 0x80000000; } - if (mask & CPSR_Q) + if (mask & CPSR_Q) { env->QF = ((val & CPSR_Q) != 0); - if (mask & CPSR_T) + } + if (mask & CPSR_T) { env->thumb = ((val & CPSR_T) != 0); + } if (mask & CPSR_IT_0_1) { env->condexec_bits &= ~3; env->condexec_bits |= (val >> 25) & 3; @@ -XXX,XX +XXX,XX @@ static void switch_mode(CPUARMState *env, int mode) int i; old_mode = env->uncached_cpsr & CPSR_M; - if (mode == old_mode) + if (mode == old_mode) { return; + } if (old_mode == ARM_CPU_MODE_FIQ) { memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) new_mode = ARM_CPU_MODE_UND; addr = 0x04; mask = CPSR_I; - if (env->thumb) + if (env->thumb) { offset = 2; - else + } else { offset = 4; + } break; case EXCP_SWI: new_mode = ARM_CPU_MODE_SVC; @@ -XXX,XX +XXX,XX @@ static inline uint16_t add16_sat(uint16_t a, uint16_t b) res = a + b; if (((res ^ a) & 0x8000) && !((a ^ b) & 0x8000)) { - if (a & 0x8000) + if (a & 0x8000) { res = 0x8000; - else + } else { res = 0x7fff; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint8_t add8_sat(uint8_t a, uint8_t b) res = a + b; if (((res ^ a) & 0x80) && !((a ^ b) & 0x80)) { - if (a & 0x80) + if (a & 0x80) { res = 0x80; - else + } else { res = 0x7f; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint16_t sub16_sat(uint16_t a, uint16_t b) res = a - b; if (((res ^ a) & 0x8000) && ((a ^ b) & 0x8000)) { - if (a & 0x8000) + if (a & 0x8000) { res = 0x8000; - else + } else { res = 0x7fff; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_sat(uint8_t a, uint8_t b) res = a - b; if (((res ^ a) & 0x80) && ((a ^ b) & 0x80)) { - if (a & 0x80) + if (a & 0x80) { res = 0x80; - else + } else { res = 0x7f; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint16_t add16_usat(uint16_t a, uint16_t b) { uint16_t res; res = a + b; - if (res < a) + if (res < a) { res = 0xffff; + } return res; } static inline uint16_t sub16_usat(uint16_t a, uint16_t b) { - if (a > b) + if (a > b) { return a - b; - else + } else { return 0; + } } static inline uint8_t add8_usat(uint8_t a, uint8_t b) { uint8_t res; res = a + b; - if (res < a) + if (res < a) { res = 0xff; + } return res; } static inline uint8_t sub8_usat(uint8_t a, uint8_t b) { - if (a > b) + if (a > b) { return a - b; - else + } else { return 0; + } } #define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16); @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) static inline uint8_t do_usad(uint8_t a, uint8_t b) { - if (a > b) + if (a > b) { return a - b; - else + } else { return b - a; + } } /* Unsigned sum of absolute byte differences. */ @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b) uint32_t mask; mask = 0; - if (flags & 1) + if (flags & 1) { mask |= 0xff; - if (flags & 2) + } + if (flags & 2) { mask |= 0xff00; - if (flags & 4) + } + if (flags & 4) { mask |= 0xff0000; - if (flags & 8) + } + if (flags & 8) { mask |= 0xff000000; + } return (a & mask) | (b & ~mask); } -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-5-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/units.h" -#include "target/arm/idau.h" -#include "trace.h" #include "cpu.h" #include "internals.h" -#include "exec/gdbstub.h" #include "exec/helper-proto.h" -#include "qemu/host-utils.h" #include "qemu/main-loop.h" #include "qemu/bitops.h" -#include "qemu/crc32c.h" -#include "qemu/qemu-print.h" #include "qemu/log.h" #include "exec/exec-all.h" -#include <zlib.h> /* For crc32 */ -#include "semihosting/semihost.h" -#include "sysemu/cpus.h" -#include "sysemu/kvm.h" -#include "qemu/range.h" -#include "qapi/qapi-commands-machine-target.h" -#include "qapi/error.h" -#include "qemu/guest-random.h" #ifdef CONFIG_TCG -#include "arm_ldst.h" #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-6-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/units.h" #include "qemu/log.h" #include "trace.h" #include "cpu.h" #include "internals.h" #include "exec/helper-proto.h" -#include "qemu/host-utils.h" #include "qemu/main-loop.h" #include "qemu/timer.h" #include "qemu/bitops.h" @@ -XXX,XX +XXX,XX @@ #include "exec/exec-all.h" #include <zlib.h> /* For crc32 */ #include "hw/irq.h" -#include "semihosting/semihost.h" -#include "sysemu/cpus.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" -#include "qemu/range.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" #ifdef CONFIG_TCG -#include "arm_ldst.h" -#include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif #include "cpregs.h" -- 2.25.1 From: Claudio Fontana <cfontana@suse.de> Remove some unused headers. Signed-off-by: Claudio Fontana <cfontana@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Message-id: 20221213190537.511-7-farosas@suse.de [added back some includes that are still needed at this point] Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 - target/arm/cpu64.c | 6 ------ 2 files changed, 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/idau.h" #include "qemu/module.h" #include "qapi/error.h" -#include "qapi/visitor.h" #include "cpu.h" #ifdef CONFIG_TCG #include "hw/core/tcg-cpu-ops.h" diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "cpu.h" -#ifdef CONFIG_TCG -#include "hw/core/tcg-cpu-ops.h" -#endif /* CONFIG_TCG */ #include "qemu/module.h" -#if !defined(CONFIG_USER_ONLY) -#include "hw/loader.h" -#endif #include "sysemu/kvm.h" #include "sysemu/hvf.h" #include "kvm_arm.h" -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The pointed MouseTransformInfo structure is accessed read-only. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/input/tsc2xxx.h | 4 ++-- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 3 +-- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/input/tsc2xxx.h +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ uWireSlave *tsc2102_init(qemu_irq pint); uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); I2SCodec *tsc210x_codec(uWireSlave *chip); uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info); void tsc210x_key_event(uWireSlave *chip, int key, int down); /* tsc2005.c */ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); +void tsc2005_set_transform(void *opaque, const MouseTransformInfo *info); #endif diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav) * from the touchscreen. Assuming 12-bit precision was used during * tslib calibration. */ -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info) +void tsc2005_set_transform(void *opaque, const MouseTransformInfo *info) { TSC2005State *s = (TSC2005State *) opaque; diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ I2SCodec *tsc210x_codec(uWireSlave *chip) * from the touchscreen. Assuming 12-bit precision was used during * tslib calibration. */ -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info) +void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info) { TSC210xState *s = (TSC210xState *) chip->opaque; #if 0 -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) } /* Touchscreen and keypad controller */ -static MouseTransformInfo n800_pointercal = { +static const MouseTransformInfo n800_pointercal = { .x = 800, .y = 480, .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 }, }; -static MouseTransformInfo n810_pointercal = { +static const MouseTransformInfo n810_pointercal = { .x = 800, .y = 480, .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 }, @@ -XXX,XX +XXX,XX @@ static void n810_key_event(void *opaque, int keycode) #define M 0 -static int n810_keys[0x80] = { +static const int n810_keys[0x80] = { [0x01] = 16, /* Q */ [0x02] = 37, /* K */ [0x03] = 24, /* O */ @@ -XXX,XX +XXX,XX @@ static void n8x0_usb_setup(struct n800_s *s) /* Setup done before the main bootloader starts by some early setup code * - used when we want to run the main bootloader in emulation. This * isn't documented. */ -static uint32_t n800_pinout[104] = { +static const uint32_t n800_pinout[104] = { 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0, 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808, 0x08080808, 0x180800c4, 0x00b80000, 0x08080808, @@ -XXX,XX +XXX,XX @@ static void n8x0_boot_init(void *opaque) #define OMAP_TAG_CBUS 0x4e03 #define OMAP_TAG_EM_ASIC_BB5 0x4e04 -static struct omap_gpiosw_info_s { +static const struct omap_gpiosw_info_s { const char *name; int line; int type; @@ -XXX,XX +XXX,XX @@ static struct omap_gpiosw_info_s { { NULL } }; -static struct omap_partition_info_s { +static const struct omap_partition_info_s { uint32_t offset; uint32_t size; int mask; @@ -XXX,XX +XXX,XX @@ static struct omap_partition_info_s { { 0, 0, 0, NULL } }; -static uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; +static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; static int n8x0_atag_setup(void *p, int model) { uint8_t *b; uint16_t *w; uint32_t *l; - struct omap_gpiosw_info_s *gpiosw; - struct omap_partition_info_s *partition; + const struct omap_gpiosw_info_s *gpiosw; + const struct omap_partition_info_s *partition; const char *tag; w = p; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Silent when compiling with -Wextra: ../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers] { NULL } ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221220142520.24094-4-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ static const struct omap_gpiosw_info_s { "headphone", N8X0_HEADPHONE_GPIO, OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, }, - { NULL } + { /* end of list */ } }, n810_gpiosw_info[] = { { "gps_reset", N810_GPS_RESET_GPIO, @@ -XXX,XX +XXX,XX @@ static const struct omap_gpiosw_info_s { "slide", N810_SLIDE_GPIO, OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, }, - { NULL } + { /* end of list */ } }; static const struct omap_partition_info_s { @@ -XXX,XX +XXX,XX @@ static const struct omap_partition_info_s { { 0x00080000, 0x00200000, 0x0, "kernel" }, { 0x00280000, 0x00200000, 0x3, "initfs" }, { 0x00480000, 0x0fb80000, 0x3, "rootfs" }, - - { 0, 0, 0, NULL } + { /* end of list */ } }, n810_part_info[] = { { 0x00000000, 0x00020000, 0x3, "bootloader" }, { 0x00020000, 0x00060000, 0x0, "config" }, { 0x00080000, 0x00220000, 0x0, "kernel" }, { 0x002a0000, 0x00400000, 0x0, "initfs" }, { 0x006a0000, 0x0f960000, 0x0, "rootfs" }, - - { 0, 0, 0, NULL } + { /* end of list */ } }; static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; -- 2.25.1 From: Zhuojia Shen <chaosdefinition@hotmail.com> In CPUID registers exposed to userspace, some registers were missing and some fields were not exposed. This patch aligns exposed ID registers and their fields with what the upstream kernel currently exposes. Specifically, the following new ID registers/fields are exposed to userspace: ID_AA64PFR1_EL1.BT: bits 3-0 ID_AA64PFR1_EL1.MTE: bits 11-8 ID_AA64PFR1_EL1.SME: bits 27-24 ID_AA64ZFR0_EL1.SVEver: bits 3-0 ID_AA64ZFR0_EL1.AES: bits 7-4 ID_AA64ZFR0_EL1.BitPerm: bits 19-16 ID_AA64ZFR0_EL1.BF16: bits 23-20 ID_AA64ZFR0_EL1.SHA3: bits 35-32 ID_AA64ZFR0_EL1.SM4: bits 43-40 ID_AA64ZFR0_EL1.I8MM: bits 47-44 ID_AA64ZFR0_EL1.F32MM: bits 55-52 ID_AA64ZFR0_EL1.F64MM: bits 59-56 ID_AA64SMFR0_EL1.F32F32: bit 32 ID_AA64SMFR0_EL1.B16F32: bit 34 ID_AA64SMFR0_EL1.F16F32: bit 35 ID_AA64SMFR0_EL1.I8I32: bits 39-36 ID_AA64SMFR0_EL1.F64F64: bit 48 ID_AA64SMFR0_EL1.I16I64: bits 55-52 ID_AA64SMFR0_EL1.FA64: bit 63 ID_AA64MMFR0_EL1.ECV: bits 63-60 ID_AA64MMFR1_EL1.AFP: bits 47-44 ID_AA64MMFR2_EL1.AT: bits 35-32 ID_AA64ISAR0_EL1.RNDR: bits 63-60 ID_AA64ISAR1_EL1.FRINTTS: bits 35-32 ID_AA64ISAR1_EL1.BF16: bits 47-44 ID_AA64ISAR1_EL1.DGH: bits 51-48 ID_AA64ISAR1_EL1.I8MM: bits 55-52 ID_AA64ISAR2_EL1.WFxT: bits 3-0 ID_AA64ISAR2_EL1.RPRES: bits 7-4 ID_AA64ISAR2_EL1.GPA3: bits 11-8 ID_AA64ISAR2_EL1.APA3: bits 15-12 The code is also refactored to use symbolic names for ID register fields for better readability and maintainability. The test case in tests/tcg/aarch64/sysregs.c is also updated to match the intended behavior. Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com> Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 96 +++++++++++++++++++++++++------ tests/tcg/aarch64/sysregs.c | 24 ++++++-- tests/tcg/aarch64/Makefile.target | 7 ++- 3 files changed, 103 insertions(+), 24 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) #ifdef CONFIG_USER_ONLY static const ARMCPRegUserSpaceInfo v8_user_idregs[] = { { .name = "ID_AA64PFR0_EL1", - .exported_bits = 0x000f000f00ff0000, - .fixed_bits = 0x0000000000000011 }, + .exported_bits = R_ID_AA64PFR0_FP_MASK | + R_ID_AA64PFR0_ADVSIMD_MASK | + R_ID_AA64PFR0_SVE_MASK | + R_ID_AA64PFR0_DIT_MASK, + .fixed_bits = (0x1u << R_ID_AA64PFR0_EL0_SHIFT) | + (0x1u << R_ID_AA64PFR0_EL1_SHIFT) }, { .name = "ID_AA64PFR1_EL1", - .exported_bits = 0x00000000000000f0 }, + .exported_bits = R_ID_AA64PFR1_BT_MASK | + R_ID_AA64PFR1_SSBS_MASK | + R_ID_AA64PFR1_MTE_MASK | + R_ID_AA64PFR1_SME_MASK }, { .name = "ID_AA64PFR*_EL1_RESERVED", - .is_glob = true }, - { .name = "ID_AA64ZFR0_EL1" }, + .is_glob = true }, + { .name = "ID_AA64ZFR0_EL1", + .exported_bits = R_ID_AA64ZFR0_SVEVER_MASK | + R_ID_AA64ZFR0_AES_MASK | + R_ID_AA64ZFR0_BITPERM_MASK | + R_ID_AA64ZFR0_BFLOAT16_MASK | + R_ID_AA64ZFR0_SHA3_MASK | + R_ID_AA64ZFR0_SM4_MASK | + R_ID_AA64ZFR0_I8MM_MASK | + R_ID_AA64ZFR0_F32MM_MASK | + R_ID_AA64ZFR0_F64MM_MASK }, + { .name = "ID_AA64SMFR0_EL1", + .exported_bits = R_ID_AA64SMFR0_F32F32_MASK | + R_ID_AA64SMFR0_B16F32_MASK | + R_ID_AA64SMFR0_F16F32_MASK | + R_ID_AA64SMFR0_I8I32_MASK | + R_ID_AA64SMFR0_F64F64_MASK | + R_ID_AA64SMFR0_I16I64_MASK | + R_ID_AA64SMFR0_FA64_MASK }, { .name = "ID_AA64MMFR0_EL1", - .fixed_bits = 0x00000000ff000000 }, - { .name = "ID_AA64MMFR1_EL1" }, + .exported_bits = R_ID_AA64MMFR0_ECV_MASK, + .fixed_bits = (0xfu << R_ID_AA64MMFR0_TGRAN64_SHIFT) | + (0xfu << R_ID_AA64MMFR0_TGRAN4_SHIFT) }, + { .name = "ID_AA64MMFR1_EL1", + .exported_bits = R_ID_AA64MMFR1_AFP_MASK }, + { .name = "ID_AA64MMFR2_EL1", + .exported_bits = R_ID_AA64MMFR2_AT_MASK }, { .name = "ID_AA64MMFR*_EL1_RESERVED", - .is_glob = true }, + .is_glob = true }, { .name = "ID_AA64DFR0_EL1", - .fixed_bits = 0x0000000000000006 }, - { .name = "ID_AA64DFR1_EL1" }, + .fixed_bits = (0x6u << R_ID_AA64DFR0_DEBUGVER_SHIFT) }, + { .name = "ID_AA64DFR1_EL1" }, { .name = "ID_AA64DFR*_EL1_RESERVED", - .is_glob = true }, + .is_glob = true }, { .name = "ID_AA64AFR*", - .is_glob = true }, + .is_glob = true }, { .name = "ID_AA64ISAR0_EL1", - .exported_bits = 0x00fffffff0fffff0 }, + .exported_bits = R_ID_AA64ISAR0_AES_MASK | + R_ID_AA64ISAR0_SHA1_MASK | + R_ID_AA64ISAR0_SHA2_MASK | + R_ID_AA64ISAR0_CRC32_MASK | + R_ID_AA64ISAR0_ATOMIC_MASK | + R_ID_AA64ISAR0_RDM_MASK | + R_ID_AA64ISAR0_SHA3_MASK | + R_ID_AA64ISAR0_SM3_MASK | + R_ID_AA64ISAR0_SM4_MASK | + R_ID_AA64ISAR0_DP_MASK | + R_ID_AA64ISAR0_FHM_MASK | + R_ID_AA64ISAR0_TS_MASK | + R_ID_AA64ISAR0_RNDR_MASK }, { .name = "ID_AA64ISAR1_EL1", - .exported_bits = 0x000000f0ffffffff }, + .exported_bits = R_ID_AA64ISAR1_DPB_MASK | + R_ID_AA64ISAR1_APA_MASK | + R_ID_AA64ISAR1_API_MASK | + R_ID_AA64ISAR1_JSCVT_MASK | + R_ID_AA64ISAR1_FCMA_MASK | + R_ID_AA64ISAR1_LRCPC_MASK | + R_ID_AA64ISAR1_GPA_MASK | + R_ID_AA64ISAR1_GPI_MASK | + R_ID_AA64ISAR1_FRINTTS_MASK | + R_ID_AA64ISAR1_SB_MASK | + R_ID_AA64ISAR1_BF16_MASK | + R_ID_AA64ISAR1_DGH_MASK | + R_ID_AA64ISAR1_I8MM_MASK }, + { .name = "ID_AA64ISAR2_EL1", + .exported_bits = R_ID_AA64ISAR2_WFXT_MASK | + R_ID_AA64ISAR2_RPRES_MASK | + R_ID_AA64ISAR2_GPA3_MASK | + R_ID_AA64ISAR2_APA3_MASK }, { .name = "ID_AA64ISAR*_EL1_RESERVED", - .is_glob = true }, + .is_glob = true }, }; modify_arm_cp_regs(v8_idregs, v8_user_idregs); #endif @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) #ifdef CONFIG_USER_ONLY static const ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo[] = { { .name = "MIDR_EL1", - .exported_bits = 0x00000000ffffffff }, - { .name = "REVIDR_EL1" }, + .exported_bits = R_MIDR_EL1_REVISION_MASK | + R_MIDR_EL1_PARTNUM_MASK | + R_MIDR_EL1_ARCHITECTURE_MASK | + R_MIDR_EL1_VARIANT_MASK | + R_MIDR_EL1_IMPLEMENTER_MASK }, + { .name = "REVIDR_EL1" }, }; modify_arm_cp_regs(id_v8_midr_cp_reginfo, id_v8_user_midr_cp_reginfo); #endif diff --git a/tests/tcg/aarch64/sysregs.c b/tests/tcg/aarch64/sysregs.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/sysregs.c +++ b/tests/tcg/aarch64/sysregs.c @@ -XXX,XX +XXX,XX @@ #define HWCAP_CPUID (1 << 11) #endif +/* + * Older assemblers don't recognize newer system register names, + * but we can still access them by the Sn_n_Cn_Cn_n syntax. + */ +#define SYS_ID_AA64ISAR2_EL1 S3_0_C0_C6_2 +#define SYS_ID_AA64MMFR2_EL1 S3_0_C0_C7_2 + int failed_bit_count; /* Read and print system register `id' value */ @@ -XXX,XX +XXX,XX @@ int main(void) * minimum valid fields - for the purposes of this check allowed * to have non-zero values. */ - get_cpu_reg_check_mask(id_aa64isar0_el1, _m(00ff,ffff,f0ff,fff0)); - get_cpu_reg_check_mask(id_aa64isar1_el1, _m(0000,00f0,ffff,ffff)); + get_cpu_reg_check_mask(id_aa64isar0_el1, _m(f0ff,ffff,f0ff,fff0)); + get_cpu_reg_check_mask(id_aa64isar1_el1, _m(00ff,f0ff,ffff,ffff)); + get_cpu_reg_check_mask(SYS_ID_AA64ISAR2_EL1, _m(0000,0000,0000,ffff)); /* TGran4 & TGran64 as pegged to -1 */ - get_cpu_reg_check_mask(id_aa64mmfr0_el1, _m(0000,0000,ff00,0000)); - get_cpu_reg_check_zero(id_aa64mmfr1_el1); + get_cpu_reg_check_mask(id_aa64mmfr0_el1, _m(f000,0000,ff00,0000)); + get_cpu_reg_check_mask(id_aa64mmfr1_el1, _m(0000,f000,0000,0000)); + get_cpu_reg_check_mask(SYS_ID_AA64MMFR2_EL1, _m(0000,000f,0000,0000)); /* EL1/EL0 reported as AA64 only */ get_cpu_reg_check_mask(id_aa64pfr0_el1, _m(000f,000f,00ff,0011)); - get_cpu_reg_check_mask(id_aa64pfr1_el1, _m(0000,0000,0000,00f0)); + get_cpu_reg_check_mask(id_aa64pfr1_el1, _m(0000,0000,0f00,0fff)); /* all hidden, DebugVer fixed to 0x6 (ARMv8 debug architecture) */ get_cpu_reg_check_mask(id_aa64dfr0_el1, _m(0000,0000,0000,0006)); get_cpu_reg_check_zero(id_aa64dfr1_el1); - get_cpu_reg_check_zero(id_aa64zfr0_el1); + get_cpu_reg_check_mask(id_aa64zfr0_el1, _m(0ff0,ff0f,00ff,00ff)); +#ifdef HAS_ARMV9_SME + get_cpu_reg_check_mask(id_aa64smfr0_el1, _m(80f1,00fd,0000,0000)); +#endif get_cpu_reg_check_zero(id_aa64afr0_el1); get_cpu_reg_check_zero(id_aa64afr1_el1); diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ config-cc.mak: Makefile $(call cc-option,-march=armv8.1-a+sve2, CROSS_CC_HAS_SVE2); \ $(call cc-option,-march=armv8.3-a, CROSS_CC_HAS_ARMV8_3); \ $(call cc-option,-mbranch-protection=standard, CROSS_CC_HAS_ARMV8_BTI); \ - $(call cc-option,-march=armv8.5-a+memtag, CROSS_CC_HAS_ARMV8_MTE)) 3> config-cc.mak + $(call cc-option,-march=armv8.5-a+memtag, CROSS_CC_HAS_ARMV8_MTE); \ + $(call cc-option,-march=armv9-a+sme, CROSS_CC_HAS_ARMV9_SME)) 3> config-cc.mak -include config-cc.mak # Pauth Tests @@ -XXX,XX +XXX,XX @@ endif ifneq ($(CROSS_CC_HAS_SVE),) # System Registers Tests AARCH64_TESTS += sysregs +ifneq ($(CROSS_CC_HAS_ARMV9_SME),) +sysregs: CFLAGS+=-march=armv9-a+sme -DHAS_ARMV9_SME +else sysregs: CFLAGS+=-march=armv8.1-a+sve +endif # SVE ioctl test AARCH64_TESTS += sve-ioctls -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This function is not used anywhere outside this file, so we can make the function "static void". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 3 --- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, /* Unmap the range of all the notifiers registered to any IOMMU mr */ void smmu_inv_notifiers_all(SMMUState *s); -/* Unmap the range of all the notifiers registered to @mr */ -void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr); - #endif /* HW_ARM_SMMU_COMMON_H */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static void smmu_unmap_notifier_range(IOMMUNotifier *n) } /* Unmap all notifiers attached to @mr */ -inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) +static void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) { IOMMUNotifier *n; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> When using Clang ("Apple clang version 14.0.0 (clang-1400.0.29.202)") and building with -Wall we get: hw/arm/smmu-common.c:173:33: warning: static function 'smmu_hash_remove_by_asid_iova' is used in an inline function with external linkage [-Wstatic-in-inline] hw/arm/smmu-common.h:170:1: note: use 'static' to give inline function 'smmu_iotlb_inv_iova' internal linkage void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, ^ static None of our code base require / use inlined functions with external linkage. Some places use internal inlining in the hot path. These two functions are certainly not in any hot path and don't justify any inlining, so these are likely oversights rather than intentional. Reported-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ void smmu_iotlb_insert(SMMUState *bs, SMMUTransCfg *cfg, SMMUTLBEntry *new) g_hash_table_insert(bs->iotlb, key, new); } -inline void smmu_iotlb_inv_all(SMMUState *s) +void smmu_iotlb_inv_all(SMMUState *s) { trace_smmu_iotlb_inv_all(); g_hash_table_remove_all(s->iotlb); @@ -XXX,XX +XXX,XX @@ static gboolean smmu_hash_remove_by_asid_iova(gpointer key, gpointer value, ((entry->iova & ~info->mask) == info->iova); } -inline void -smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, - uint8_t tg, uint64_t num_pages, uint8_t ttl) +void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, + uint8_t tg, uint64_t num_pages, uint8_t ttl) { /* if tg is not set we use 4KB range invalidation */ uint8_t granule = tg ? tg * 2 + 10 : 12; @@ -XXX,XX +XXX,XX @@ smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, &info); } -inline void smmu_iotlb_inv_asid(SMMUState *s, uint16_t asid) +void smmu_iotlb_inv_asid(SMMUState *s, uint16_t asid) { trace_smmu_iotlb_inv_asid(asid); g_hash_table_foreach_remove(s->iotlb, smmu_hash_remove_by_asid, &asid); @@ -XXX,XX +XXX,XX @@ error: * * return 0 on success */ -inline int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, - SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info) +int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, + SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info) { if (!cfg->aa64) { /* -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> So far the GPT timers were unable to raise IRQs to the processor. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 5 +++++ hw/arm/fsl-imx7.c | 10 ++++++++++ 2 files changed, 15 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_USB2_IRQ = 42, FSL_IMX7_USB3_IRQ = 40, + FSL_IMX7_GPT1_IRQ = 55, + FSL_IMX7_GPT2_IRQ = 54, + FSL_IMX7_GPT3_IRQ = 53, + FSL_IMX7_GPT4_IRQ = 52, + FSL_IMX7_WDOG1_IRQ = 78, FSL_IMX7_WDOG2_IRQ = 79, FSL_IMX7_WDOG3_IRQ = 10, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPT4_ADDR, }; + static const int FSL_IMX7_GPTn_IRQ[FSL_IMX7_NUM_GPTS] = { + FSL_IMX7_GPT1_IRQ, + FSL_IMX7_GPT2_IRQ, + FSL_IMX7_GPT3_IRQ, + FSL_IMX7_GPT4_IRQ, + }; + s->gpt[i].ccm = IMX_CCM(&s->ccm); sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, FSL_IMX7_GPTn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_GPTn_IRQ[i])); } for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> CCM derived clocks will have to be added later. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx7_ccm.c | 49 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 9 deletions(-) diff --git a/hw/misc/imx7_ccm.c b/hw/misc/imx7_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx7_ccm.c +++ b/hw/misc/imx7_ccm.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "migration/vmstate.h" +#include "trace.h" + +#define CKIH_FREQ 24000000 /* 24MHz crystal input */ + static void imx7_analog_reset(DeviceState *dev) { IMX7AnalogState *s = IMX7_ANALOG(dev); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx7_ccm = { static uint32_t imx7_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) { /* - * This function is "consumed" by GPT emulation code, however on - * i.MX7 each GPT block can have their own clock root. This means - * that this functions needs somehow to know requester's identity - * and the way to pass it: be it via additional IMXClk constants - * or by adding another argument to this method needs to be - * figured out + * This function is "consumed" by GPT emulation code. Some clocks + * have fixed frequencies and we can provide requested frequency + * easily. However for CCM provided clocks (like IPG) each GPT + * timer can have its own clock root. + * This means we need additionnal information when calling this + * function to know the requester's identity. */ - qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Not implemented\n", - TYPE_IMX7_CCM, __func__); - return 0; + uint32_t freq = 0; + + switch (clock) { + case CLK_NONE: + break; + case CLK_32k: + freq = CKIL_FREQ; + break; + case CLK_HIGH: + freq = CKIH_FREQ; + break; + case CLK_IPG: + case CLK_IPG_HIGH: + /* + * For now we don't have a way to figure out the device this + * function is called for. Until then the IPG derived clocks + * are left unimplemented. + */ + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Clock %d Not implemented\n", + TYPE_IMX7_CCM, __func__, clock); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n", + TYPE_IMX7_CCM, __func__, clock); + break; + } + + trace_ccm_clock_freq(clock, freq); + + return freq; } static void imx7_ccm_class_init(ObjectClass *klass, void *data) -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_gpt.h | 1 + hw/arm/fsl-imx6ul.c | 2 +- hw/misc/imx6ul_ccm.c | 6 ------ hw/timer/imx_gpt.c | 25 +++++++++++++++++++++++++ 4 files changed, 27 insertions(+), 7 deletions(-) diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX25_GPT "imx25.gpt" #define TYPE_IMX31_GPT "imx31.gpt" #define TYPE_IMX6_GPT "imx6.gpt" +#define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); - object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX7_GPT); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX6UL_GPT); } /* diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6ul_ccm.c +++ b/hw/misc/imx6ul_ccm.c @@ -XXX,XX +XXX,XX @@ static uint32_t imx6ul_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) case CLK_32k: freq = CKIL_FREQ; break; - case CLK_HIGH: - freq = CKIH_FREQ; - break; - case CLK_HIGH_DIV: - freq = CKIH_FREQ / 8; - break; default: qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n", TYPE_IMX6UL_CCM, __func__, clock); diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ static const IMXClk imx6_gpt_clocks[] = { CLK_HIGH, /* 111 reference clock */ }; +static const IMXClk imx6ul_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz*/ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_NONE, /* 101 not defined */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + static const IMXClk imx7_gpt_clocks[] = { CLK_NONE, /* 000 No clock source */ CLK_IPG, /* 001 ipg_clk, 532MHz*/ @@ -XXX,XX +XXX,XX @@ static void imx6_gpt_init(Object *obj) s->clocks = imx6_gpt_clocks; } +static void imx6ul_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx6ul_gpt_clocks; +} + static void imx7_gpt_init(Object *obj) { IMXGPTState *s = IMX_GPT(obj); @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx6_gpt_info = { .instance_init = imx6_gpt_init, }; +static const TypeInfo imx6ul_gpt_info = { + .name = TYPE_IMX6UL_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx6ul_gpt_init, +}; + static const TypeInfo imx7_gpt_info = { .name = TYPE_IMX7_GPT, .parent = TYPE_IMX25_GPT, @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx25_gpt_info); type_register_static(&imx31_gpt_info); type_register_static(&imx6_gpt_info); + type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); } -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> IRQs were not associated to the various GPIO devices inside i.MX7D. This patch brings the i.MX7D on par with i.MX6. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 20221226101418.415170-1-jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 15 +++++++++++++++ hw/arm/fsl-imx7.c | 31 ++++++++++++++++++++++++++++++- 2 files changed, 45 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_GPT3_IRQ = 53, FSL_IMX7_GPT4_IRQ = 52, + FSL_IMX7_GPIO1_LOW_IRQ = 64, + FSL_IMX7_GPIO1_HIGH_IRQ = 65, + FSL_IMX7_GPIO2_LOW_IRQ = 66, + FSL_IMX7_GPIO2_HIGH_IRQ = 67, + FSL_IMX7_GPIO3_LOW_IRQ = 68, + FSL_IMX7_GPIO3_HIGH_IRQ = 69, + FSL_IMX7_GPIO4_LOW_IRQ = 70, + FSL_IMX7_GPIO4_HIGH_IRQ = 71, + FSL_IMX7_GPIO5_LOW_IRQ = 72, + FSL_IMX7_GPIO5_HIGH_IRQ = 73, + FSL_IMX7_GPIO6_LOW_IRQ = 74, + FSL_IMX7_GPIO6_HIGH_IRQ = 75, + FSL_IMX7_GPIO7_LOW_IRQ = 76, + FSL_IMX7_GPIO7_HIGH_IRQ = 77, + FSL_IMX7_WDOG1_IRQ = 78, FSL_IMX7_WDOG2_IRQ = 79, FSL_IMX7_WDOG3_IRQ = 10, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPIO7_ADDR, }; + static const int FSL_IMX7_GPIOn_LOW_IRQ[FSL_IMX7_NUM_GPIOS] = { + FSL_IMX7_GPIO1_LOW_IRQ, + FSL_IMX7_GPIO2_LOW_IRQ, + FSL_IMX7_GPIO3_LOW_IRQ, + FSL_IMX7_GPIO4_LOW_IRQ, + FSL_IMX7_GPIO5_LOW_IRQ, + FSL_IMX7_GPIO6_LOW_IRQ, + FSL_IMX7_GPIO7_LOW_IRQ, + }; + + static const int FSL_IMX7_GPIOn_HIGH_IRQ[FSL_IMX7_NUM_GPIOS] = { + FSL_IMX7_GPIO1_HIGH_IRQ, + FSL_IMX7_GPIO2_HIGH_IRQ, + FSL_IMX7_GPIO3_HIGH_IRQ, + FSL_IMX7_GPIO4_HIGH_IRQ, + FSL_IMX7_GPIO5_HIGH_IRQ, + FSL_IMX7_GPIO6_HIGH_IRQ, + FSL_IMX7_GPIO7_HIGH_IRQ, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, FSL_IMX7_GPIOn_ADDR[i]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, + FSL_IMX7_GPIOn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_GPIOn_LOW_IRQ[i])); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_GPIOn_HIGH_IRQ[i])); } /* -- 2.25.1 From: Stephen Longfield <slongfield@google.com> Size is used at lines 1088/1188 for the loop, which reads the last 4 bytes from the crc_ptr so it does need to get increased, however it shouldn't be increased before the buffer is passed to CRC computation, or the crc32 function will access uninitialized memory. This was pointed out to me by clg@kaod.org during the code review of a similar patch to hw/net/ftgmac100.c Change-Id: Ib0464303b191af1e28abeb2f5105eb25aadb5e9b Signed-off-by: Stephen Longfield <slongfield@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20221221183202.3788132-1-slongfield@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/imx_fec.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static ssize_t imx_fec_receive(NetClientState *nc, const uint8_t *buf, return 0; } - /* 4 bytes for the CRC. */ - size += 4; crc = cpu_to_be32(crc32(~0, buf, size)); + /* Increase size by 4, loop below reads the last 4 bytes from crc_ptr. */ + size += 4; crc_ptr = (uint8_t *) &crc; /* Huge frames are truncated. */ @@ -XXX,XX +XXX,XX @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf, return 0; } - /* 4 bytes for the CRC. */ - size += 4; crc = cpu_to_be32(crc32(~0, buf, size)); + /* Increase size by 4, loop below reads the last 4 bytes from crc_ptr. */ + size += 4; crc_ptr = (uint8_t *) &crc; if (shift16) { -- 2.25.1 I might squeeze in another pullreq before softfreeze, but the queue was already big enough that I wanted to send this lot out now. -- PMM The following changes since commit 4abf70a661a5df3886ac9d7c19c3617fa92b922a: Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-06-24' into staging (2020-07-03 15:34:45 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200703 for you to fetch changes up to 0f10bf84a9d489259a5b11c6aa1b05c1175b76ea: Deprecate TileGX port (2020-07-03 16:59:46 +0100) ---------------------------------------------------------------- target-arm queue: * i.MX6UL EVK board: put PHYs in the correct places * hw/arm/virt: Let the virtio-iommu bypass MSIs * target/arm: kvm: Handle DABT with no valid ISS * hw/arm/virt-acpi-build: Only expose flash on older machine types * target/arm: Fix temp double-free in sve ldr/str * hw/display/bcm2835_fb.c: Initialize all fields of struct * hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak * Deprecate TileGX port ---------------------------------------------------------------- Andrew Jones (4): tests/acpi: remove stale allowed tables tests/acpi: virt: allow DSDT acpi table changes hw/arm/virt-acpi-build: Only expose flash on older machine types tests/acpi: virt: update golden masters for DSDT Beata Michalska (2): target/arm: kvm: Handle DABT with no valid ISS target/arm: kvm: Handle misconfigured dabt injection Eric Auger (5): qdev: Introduce DEFINE_PROP_RESERVED_REGION virtio-iommu: Implement RESV_MEM probe request virtio-iommu: Handle reserved regions in the translation process virtio-iommu-pci: Add array of Interval properties hw/arm/virt: Let the virtio-iommu bypass MSIs Jean-Christophe Dubois (3): Add a phy-num property to the i.MX FEC emulator Add the ability to select a different PHY for each i.MX6UL FEC interface Select MDIO device 2 and 1 as PHY devices for i.MX6UL EVK board. Peter Maydell (19): hw/display/bcm2835_fb.c: Initialize all fields of struct hw/arm/spitz: Detabify hw/arm/spitz: Create SpitzMachineClass abstract base class hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals hw/misc/max111x: provide QOM properties for setting initial values hw/misc/max111x: Don't use vmstate_register() ssi: Add ssi_realize_and_unref() hw/arm/spitz: Use max111x properties to set initial values hw/misc/max111x: Use GPIO lines rather than max111x_set_input() hw/misc/max111x: Create header file for documentation, TYPE_ macros hw/arm/spitz: Encapsulate misc GPIO handling in a device hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg Replace uses of FROM_SSI_SLAVE() macro with QOM casts Deprecate TileGX port Richard Henderson (1): target/arm: Fix temp double-free in sve ldr/str docs/system/deprecated.rst | 11 + include/exec/memory.h | 6 + include/hw/arm/fsl-imx6ul.h | 2 + include/hw/arm/pxa.h | 1 - include/hw/arm/sharpsl.h | 3 - include/hw/arm/virt.h | 8 + include/hw/misc/max111x.h | 56 +++ include/hw/net/imx_fec.h | 1 + include/hw/qdev-properties.h | 3 + include/hw/ssi/ssi.h | 31 +- include/hw/virtio/virtio-iommu.h | 2 + include/qemu/typedefs.h | 1 + target/arm/cpu.h | 2 + target/arm/kvm_arm.h | 10 + target/arm/translate-a64.h | 1 + tests/qtest/bios-tables-test-allowed-diff.h | 18 - hw/arm/fsl-imx6ul.c | 10 + hw/arm/mcimx6ul-evk.c | 2 + hw/arm/pxa2xx_pic.c | 9 +- hw/arm/spitz.c | 507 ++++++++++++++++------------ hw/arm/virt-acpi-build.c | 5 +- hw/arm/virt.c | 33 ++ hw/arm/z2.c | 11 +- hw/core/qdev-properties.c | 89 +++++ hw/display/ads7846.c | 9 +- hw/display/bcm2835_fb.c | 4 + hw/display/ssd0323.c | 10 +- hw/gpio/zaurus.c | 12 +- hw/misc/max111x.c | 86 +++-- hw/net/imx_fec.c | 24 +- hw/sd/ssi-sd.c | 4 +- hw/ssi/ssi.c | 7 +- hw/virtio/virtio-iommu-pci.c | 11 + hw/virtio/virtio-iommu.c | 114 ++++++- target/arm/kvm.c | 80 +++++ target/arm/kvm32.c | 34 ++ target/arm/kvm64.c | 49 +++ target/arm/translate-a64.c | 6 + target/arm/translate-sve.c | 8 +- MAINTAINERS | 1 + hw/net/trace-events | 4 +- hw/virtio/trace-events | 1 + tests/data/acpi/virt/DSDT | Bin 5307 -> 5205 bytes tests/data/acpi/virt/DSDT.memhp | Bin 6668 -> 6566 bytes tests/data/acpi/virt/DSDT.numamem | Bin 5307 -> 5205 bytes 45 files changed, 974 insertions(+), 312 deletions(-) create mode 100644 include/hw/misc/max111x.h From: Jean-Christophe Dubois <jcd@tribudubois.net> We need a solution to use an Ethernet PHY that is not the first device on the MDIO bus (device 0 on MDIO bus). As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but only one MDIO bus on which the 2 related PHY are connected but at unique addresses. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/imx_fec.h | 1 + hw/net/imx_fec.c | 24 +++++++++++++++++------- hw/net/trace-events | 4 ++-- 3 files changed, 20 insertions(+), 9 deletions(-) diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -XXX,XX +XXX,XX @@ typedef struct IMXFECState { uint32_t phy_advertise; uint32_t phy_int; uint32_t phy_int_mask; + uint32_t phy_num; bool is_fec; diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static void imx_phy_reset(IMXFECState *s) static uint32_t imx_phy_read(IMXFECState *s, int reg) { uint32_t val; + uint32_t phy = reg / 32; - if (reg > 31) { - /* we only advertise one phy */ + if (phy != s->phy_num) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n", + TYPE_IMX_FEC, __func__, phy); return 0; } + reg %= 32; + switch (reg) { case 0: /* Basic Control */ val = s->phy_control; @@ -XXX,XX +XXX,XX @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) break; } - trace_imx_phy_read(val, reg); + trace_imx_phy_read(val, phy, reg); return val; } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) { - trace_imx_phy_write(val, reg); + uint32_t phy = reg / 32; - if (reg > 31) { - /* we only advertise one phy */ + if (phy != s->phy_num) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n", + TYPE_IMX_FEC, __func__, phy); return; } + reg %= 32; + + trace_imx_phy_write(val, phy, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { @@ -XXX,XX +XXX,XX @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value, extract32(value, 18, 10))); } else { - /* This a write operation */ + /* This is a write operation */ imx_phy_write(s, extract32(value, 18, 10), extract32(value, 0, 16)); } /* raise the interrupt as the PHY operation is done */ @@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp) static Property imx_eth_properties[] = { DEFINE_NIC_PROPERTIES(IMXFECState, conf), DEFINE_PROP_UINT32("tx-ring-num", IMXFECState, tx_ring_num, 1), + DEFINE_PROP_UINT32("phy-num", IMXFECState, phy_num, 0), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int reg) "0x%04"PRIx32" <= reg[%d]" -imx_phy_write(uint32_t val, int reg) "0x%04"PRIx32" => reg[%d]" +imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" +imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_update_link(const char *s) "%s" imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" -- 2.20.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> Add properties to the i.MX6UL processor to be able to select a particular PHY on the MDIO bus for each FEC device. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: ea1d604198b6b73ea6521676e45bacfc597aba53.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 ++ hw/arm/fsl-imx6ul.c | 10 ++++++++++ 2 files changed, 12 insertions(+) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX6ULState { MemoryRegion caam; MemoryRegion ocram; MemoryRegion ocram_alias; + + uint32_t phy_num[FSL_IMX6UL_NUM_ETHS]; } FslIMX6ULState; enum FslIMX6ULMemoryMap { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENET2_TIMER_IRQ, }; + object_property_set_uint(OBJECT(&s->eth[i]), + s->phy_num[i], + "phy-num", &error_abort); object_property_set_uint(OBJECT(&s->eth[i]), FSL_IMX6UL_ETH_NUM_TX_RINGS, "tx-ring-num", &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias); } +static Property fsl_imx6ul_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslIMX6ULState, phy_num[0], 0), + DEFINE_PROP_UINT32("fec2-phy-num", FslIMX6ULState, phy_num[1], 1), + DEFINE_PROP_END_OF_LIST(), +}; + static void fsl_imx6ul_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx6ul_properties); dc->realize = fsl_imx6ul_realize; dc->desc = "i.MX6UL SOC"; /* Reason: Uses serial_hds and nd_table in realize() directly */ -- 2.20.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The i.MX6UL EVK 14x14 board uses: - PHY 2 for FEC 1 - PHY 1 for FEC 2 Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: fb41992126c091a71d76ab3d1898959091f60583.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mcimx6ul-evk.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/mcimx6ul-evk.c b/hw/arm/mcimx6ul-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mcimx6ul-evk.c +++ b/hw/arm/mcimx6ul-evk.c @@ -XXX,XX +XXX,XX @@ static void mcimx6ul_evk_init(MachineState *machine) s = FSL_IMX6UL(object_new(TYPE_FSL_IMX6UL)); object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); + object_property_set_uint(OBJECT(s), 2, "fec1-phy-num", &error_fatal); + object_property_set_uint(OBJECT(s), 1, "fec2-phy-num", &error_fatal); qdev_realize(DEVICE(s), NULL, &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_MMDC_ADDR, -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Introduce a new property defining a reserved region: <low address>:<high address>:<type>. This will be used to encode reserved IOVA regions. For instance, in virtio-iommu use case, reserved IOVA regions will be passed by the machine code to the virtio-iommu-pci device (an array of those). The type of the reserved region will match the virtio_iommu_probe_resv_mem subtype value: - VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0) - VIRTIO_IOMMU_RESV_MEM_T_MSI (1) on PC/Q35 machine, this will be used to inform the virtio-iommu-pci device it should bypass the MSI region. The reserved region will be: 0xfee00000:0xfeefffff:1. On ARM, we can declare the ITS MSI doorbell as an MSI region to prevent MSIs from being mapped on guest side. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200629070404.10969-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/memory.h | 6 +++ include/hw/qdev-properties.h | 3 ++ include/qemu/typedefs.h | 1 + hw/core/qdev-properties.c | 89 ++++++++++++++++++++++++++++++++++++ 4 files changed, 99 insertions(+) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ extern bool global_dirty_log; typedef struct MemoryRegionOps MemoryRegionOps; +struct ReservedRegion { + hwaddr low; + hwaddr high; + unsigned type; +}; + typedef struct IOMMUTLBEntry IOMMUTLBEntry; /* See address_space_translate: bit 0 is read, bit 1 is write. */ diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-properties.h +++ b/include/hw/qdev-properties.h @@ -XXX,XX +XXX,XX @@ extern const PropertyInfo qdev_prop_string; extern const PropertyInfo qdev_prop_chr; extern const PropertyInfo qdev_prop_tpm; extern const PropertyInfo qdev_prop_macaddr; +extern const PropertyInfo qdev_prop_reserved_region; extern const PropertyInfo qdev_prop_on_off_auto; extern const PropertyInfo qdev_prop_multifd_compression; extern const PropertyInfo qdev_prop_losttickpolicy; @@ -XXX,XX +XXX,XX @@ extern const PropertyInfo qdev_prop_pcie_link_width; DEFINE_PROP(_n, _s, _f, qdev_prop_drive_iothread, BlockBackend *) #define DEFINE_PROP_MACADDR(_n, _s, _f) \ DEFINE_PROP(_n, _s, _f, qdev_prop_macaddr, MACAddr) +#define DEFINE_PROP_RESERVED_REGION(_n, _s, _f) \ + DEFINE_PROP(_n, _s, _f, qdev_prop_reserved_region, ReservedRegion) #define DEFINE_PROP_ON_OFF_AUTO(_n, _s, _f, _d) \ DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_on_off_auto, OnOffAuto) #define DEFINE_PROP_MULTIFD_COMPRESSION(_n, _s, _f, _d) \ diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct ISABus ISABus; typedef struct ISADevice ISADevice; typedef struct IsaDma IsaDma; typedef struct MACAddr MACAddr; +typedef struct ReservedRegion ReservedRegion; typedef struct MachineClass MachineClass; typedef struct MachineState MachineState; typedef struct MemoryListener MemoryListener; diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev-properties.c +++ b/hw/core/qdev-properties.c @@ -XXX,XX +XXX,XX @@ #include "chardev/char.h" #include "qemu/uuid.h" #include "qemu/units.h" +#include "qemu/cutils.h" void qdev_prop_set_after_realize(DeviceState *dev, const char *name, Error **errp) @@ -XXX,XX +XXX,XX @@ const PropertyInfo qdev_prop_macaddr = { .set = set_mac, }; +/* --- Reserved Region --- */ + +/* + * Accepted syntax: + * <low address>:<high address>:<type> + * where low/high addresses are uint64_t in hexadecimal + * and type is a non-negative decimal integer + */ +static void get_reserved_region(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + DeviceState *dev = DEVICE(obj); + Property *prop = opaque; + ReservedRegion *rr = qdev_get_prop_ptr(dev, prop); + char buffer[64]; + char *p = buffer; + int rc; + + rc = snprintf(buffer, sizeof(buffer), "0x%"PRIx64":0x%"PRIx64":%u", + rr->low, rr->high, rr->type); + assert(rc < sizeof(buffer)); + + visit_type_str(v, name, &p, errp); +} + +static void set_reserved_region(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + DeviceState *dev = DEVICE(obj); + Property *prop = opaque; + ReservedRegion *rr = qdev_get_prop_ptr(dev, prop); + Error *local_err = NULL; + const char *endptr; + char *str; + int ret; + + if (dev->realized) { + qdev_prop_set_after_realize(dev, name, errp); + return; + } + + visit_type_str(v, name, &str, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + + ret = qemu_strtou64(str, &endptr, 16, &rr->low); + if (ret) { + error_setg(errp, "start address of '%s'" + " must be a hexadecimal integer", name); + goto out; + } + if (*endptr != ':') { + goto separator_error; + } + + ret = qemu_strtou64(endptr + 1, &endptr, 16, &rr->high); + if (ret) { + error_setg(errp, "end address of '%s'" + " must be a hexadecimal integer", name); + goto out; + } + if (*endptr != ':') { + goto separator_error; + } + + ret = qemu_strtoui(endptr + 1, &endptr, 10, &rr->type); + if (ret) { + error_setg(errp, "type of '%s'" + " must be a non-negative decimal integer", name); + } + goto out; + +separator_error: + error_setg(errp, "reserved region fields must be separated with ':'"); +out: + g_free(str); + return; +} + +const PropertyInfo qdev_prop_reserved_region = { + .name = "reserved_region", + .description = "Reserved Region, example: 0xFEE00000:0xFEEFFFFF:0", + .get = get_reserved_region, + .set = set_reserved_region, +}; + /* --- on/off/auto --- */ const PropertyInfo qdev_prop_on_off_auto = { -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> This patch implements the PROBE request. At the moment, only THE RESV_MEM property is handled. The first goal is to report iommu wide reserved regions such as the MSI regions set by the machine code. On x86 this will be the IOAPIC MSI region, [0xFEE00000 - 0xFEEFFFFF], on ARM this may be the ITS doorbell. In the future we may introduce per device reserved regions. This will be useful when protecting host assigned devices which may expose their own reserved regions Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200629070404.10969-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/virtio/virtio-iommu.h | 2 + hw/virtio/virtio-iommu.c | 94 ++++++++++++++++++++++++++++++-- hw/virtio/trace-events | 1 + 3 files changed, 93 insertions(+), 4 deletions(-) diff --git a/include/hw/virtio/virtio-iommu.h b/include/hw/virtio/virtio-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/virtio/virtio-iommu.h +++ b/include/hw/virtio/virtio-iommu.h @@ -XXX,XX +XXX,XX @@ typedef struct VirtIOIOMMU { GHashTable *as_by_busptr; IOMMUPciBus *iommu_pcibus_by_bus_num[PCI_BUS_MAX]; PCIBus *primary_bus; + ReservedRegion *reserved_regions; + uint32_t nb_reserved_regions; GTree *domains; QemuMutex mutex; GTree *endpoints; diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu.c +++ b/hw/virtio/virtio-iommu.c @@ -XXX,XX +XXX,XX @@ /* Max size */ #define VIOMMU_DEFAULT_QUEUE_SIZE 256 +#define VIOMMU_PROBE_SIZE 512 typedef struct VirtIOIOMMUDomain { uint32_t id; @@ -XXX,XX +XXX,XX @@ static int virtio_iommu_unmap(VirtIOIOMMU *s, return ret; } +static ssize_t virtio_iommu_fill_resv_mem_prop(VirtIOIOMMU *s, uint32_t ep, + uint8_t *buf, size_t free) +{ + struct virtio_iommu_probe_resv_mem prop = {}; + size_t size = sizeof(prop), length = size - sizeof(prop.head), total; + int i; + + total = size * s->nb_reserved_regions; + + if (total > free) { + return -ENOSPC; + } + + for (i = 0; i < s->nb_reserved_regions; i++) { + unsigned subtype = s->reserved_regions[i].type; + + assert(subtype == VIRTIO_IOMMU_RESV_MEM_T_RESERVED || + subtype == VIRTIO_IOMMU_RESV_MEM_T_MSI); + prop.head.type = cpu_to_le16(VIRTIO_IOMMU_PROBE_T_RESV_MEM); + prop.head.length = cpu_to_le16(length); + prop.subtype = subtype; + prop.start = cpu_to_le64(s->reserved_regions[i].low); + prop.end = cpu_to_le64(s->reserved_regions[i].high); + + memcpy(buf, &prop, size); + + trace_virtio_iommu_fill_resv_property(ep, prop.subtype, + prop.start, prop.end); + buf += size; + } + return total; +} + +/** + * virtio_iommu_probe - Fill the probe request buffer with + * the properties the device is able to return + */ +static int virtio_iommu_probe(VirtIOIOMMU *s, + struct virtio_iommu_req_probe *req, + uint8_t *buf) +{ + uint32_t ep_id = le32_to_cpu(req->endpoint); + size_t free = VIOMMU_PROBE_SIZE; + ssize_t count; + + if (!virtio_iommu_mr(s, ep_id)) { + return VIRTIO_IOMMU_S_NOENT; + } + + count = virtio_iommu_fill_resv_mem_prop(s, ep_id, buf, free); + if (count < 0) { + return VIRTIO_IOMMU_S_INVAL; + } + buf += count; + free -= count; + + return VIRTIO_IOMMU_S_OK; +} + static int virtio_iommu_iov_to_req(struct iovec *iov, unsigned int iov_cnt, void *req, size_t req_sz) @@ -XXX,XX +XXX,XX @@ virtio_iommu_handle_req(detach) virtio_iommu_handle_req(map) virtio_iommu_handle_req(unmap) +static int virtio_iommu_handle_probe(VirtIOIOMMU *s, + struct iovec *iov, + unsigned int iov_cnt, + uint8_t *buf) +{ + struct virtio_iommu_req_probe req; + int ret = virtio_iommu_iov_to_req(iov, iov_cnt, &req, sizeof(req)); + + return ret ? ret : virtio_iommu_probe(s, &req, buf); +} + static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) { VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); struct virtio_iommu_req_head head; struct virtio_iommu_req_tail tail = {}; + size_t output_size = sizeof(tail), sz; VirtQueueElement *elem; unsigned int iov_cnt; struct iovec *iov; - size_t sz; + void *buf = NULL; for (;;) { elem = virtqueue_pop(vq, sizeof(VirtQueueElement)); @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) case VIRTIO_IOMMU_T_UNMAP: tail.status = virtio_iommu_handle_unmap(s, iov, iov_cnt); break; + case VIRTIO_IOMMU_T_PROBE: + { + struct virtio_iommu_req_tail *ptail; + + output_size = s->config.probe_size + sizeof(tail); + buf = g_malloc0(output_size); + + ptail = (struct virtio_iommu_req_tail *) + (buf + s->config.probe_size); + ptail->status = virtio_iommu_handle_probe(s, iov, iov_cnt, buf); + } default: tail.status = VIRTIO_IOMMU_S_UNSUPP; } @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) out: sz = iov_from_buf(elem->in_sg, elem->in_num, 0, - &tail, sizeof(tail)); - assert(sz == sizeof(tail)); + buf ? buf : &tail, output_size); + assert(sz == output_size); - virtqueue_push(vq, elem, sizeof(tail)); + virtqueue_push(vq, elem, sz); virtio_notify(vdev, vq); g_free(elem); + g_free(buf); } } @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_device_realize(DeviceState *dev, Error **errp) s->config.page_size_mask = TARGET_PAGE_MASK; s->config.input_range.end = -1UL; s->config.domain_range.end = 32; + s->config.probe_size = VIOMMU_PROBE_SIZE; virtio_add_feature(&s->features, VIRTIO_RING_F_EVENT_IDX); virtio_add_feature(&s->features, VIRTIO_RING_F_INDIRECT_DESC); @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_device_realize(DeviceState *dev, Error **errp) virtio_add_feature(&s->features, VIRTIO_IOMMU_F_MAP_UNMAP); virtio_add_feature(&s->features, VIRTIO_IOMMU_F_BYPASS); virtio_add_feature(&s->features, VIRTIO_IOMMU_F_MMIO); + virtio_add_feature(&s->features, VIRTIO_IOMMU_F_PROBE); qemu_mutex_init(&s->mutex); diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/trace-events +++ b/hw/virtio/trace-events @@ -XXX,XX +XXX,XX @@ virtio_iommu_get_domain(uint32_t domain_id) "Alloc domain=%d" virtio_iommu_put_domain(uint32_t domain_id) "Free domain=%d" virtio_iommu_translate_out(uint64_t virt_addr, uint64_t phys_addr, uint32_t sid) "0x%"PRIx64" -> 0x%"PRIx64 " for sid=%d" virtio_iommu_report_fault(uint8_t reason, uint32_t flags, uint32_t endpoint, uint64_t addr) "FAULT reason=%d flags=%d endpoint=%d address =0x%"PRIx64 +virtio_iommu_fill_resv_property(uint32_t devid, uint8_t subtype, uint64_t start, uint64_t end) "dev= %d, type=%d start=0x%"PRIx64" end=0x%"PRIx64 -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> When translating an address we need to check if it belongs to a reserved virtual address range. If it does, there are 2 cases: - it belongs to a RESERVED region: the guest should neither use this address in a MAP not instruct the end-point to DMA on them. We report an error - It belongs to an MSI region: we bypass the translation. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200629070404.10969-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/virtio/virtio-iommu.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu.c +++ b/hw/virtio/virtio-iommu.c @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry virtio_iommu_translate(IOMMUMemoryRegion *mr, hwaddr addr, uint32_t sid, flags; bool bypass_allowed; bool found; + int i; interval.low = addr; interval.high = addr + 1; @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry virtio_iommu_translate(IOMMUMemoryRegion *mr, hwaddr addr, goto unlock; } + for (i = 0; i < s->nb_reserved_regions; i++) { + ReservedRegion *reg = &s->reserved_regions[i]; + + if (addr >= reg->low && addr <= reg->high) { + switch (reg->type) { + case VIRTIO_IOMMU_RESV_MEM_T_MSI: + entry.perm = flag; + break; + case VIRTIO_IOMMU_RESV_MEM_T_RESERVED: + default: + virtio_iommu_report_fault(s, VIRTIO_IOMMU_FAULT_R_MAPPING, + VIRTIO_IOMMU_FAULT_F_ADDRESS, + sid, addr); + break; + } + goto unlock; + } + } + if (!ep->domain) { if (!bypass_allowed) { error_report_once("%s %02x:%02x.%01x not attached to any domain", -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> The machine may need to pass reserved regions to the virtio-iommu-pci device (such as the MSI window on x86 or the MSI doorbells on ARM). So let's add an array of Interval properties. Note: if some reserved regions are already set by the machine code - which should be the case in general -, the length of the property array is already set and prevents the end-user from modifying them. For example, attempting to use: -device virtio-iommu-pci,\ len-reserved-regions=1,reserved-regions[0]=0xfee00000:0xfeefffff:1 would result in the following error message: qemu-system-aarch64: -device virtio-iommu-pci,addr=0xa, len-reserved-regions=1,reserved-regions[0]=0xfee00000:0xfeefffff:1: array size property len-reserved-regions may not be set more than once Otherwise, for example, adding two reserved regions is achieved using the following options: -device virtio-iommu-pci,addr=0xa,len-reserved-regions=2,\ reserved-regions[0]=0xfee00000:0xfeefffff:1,\ reserved-regions[1]=0x1000000:100ffff:1 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20200629070404.10969-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/virtio/virtio-iommu-pci.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu-pci.c +++ b/hw/virtio/virtio-iommu-pci.c @@ -XXX,XX +XXX,XX @@ struct VirtIOIOMMUPCI { static Property virtio_iommu_pci_properties[] = { DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0), + DEFINE_PROP_ARRAY("reserved-regions", VirtIOIOMMUPCI, + vdev.nb_reserved_regions, vdev.reserved_regions, + qdev_prop_reserved_region, ReservedRegion), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) { VirtIOIOMMUPCI *dev = VIRTIO_IOMMU_PCI(vpci_dev); DeviceState *vdev = DEVICE(&dev->vdev); + VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); if (!qdev_get_machine_hotplug_handler(DEVICE(vpci_dev))) { MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) "-no-acpi\n"); return; } + for (int i = 0; i < s->nb_reserved_regions; i++) { + if (s->reserved_regions[i].type != VIRTIO_IOMMU_RESV_MEM_T_RESERVED && + s->reserved_regions[i].type != VIRTIO_IOMMU_RESV_MEM_T_MSI) { + error_setg(errp, "reserved region %d has an invalid type", i); + error_append_hint(errp, "Valid values are 0 and 1\n"); + } + } object_property_set_link(OBJECT(dev), OBJECT(pci_get_bus(&vpci_dev->pci_dev)), "primary-bus", &error_abort); -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> At the moment the virtio-iommu translates MSI transactions. This behavior is inherited from ARM SMMU. The virt machine code knows where the guest MSI doorbells are so we can easily declare those regions as VIRTIO_IOMMU_RESV_MEM_T_MSI. With that setting the guest will not map MSIs through the IOMMU and those transactions will be simply bypassed. Depending on which MSI controller is in use (ITS or GICV2M), we declare either: - the ITS interrupt translation space (ITS_base + 0x10000), containing the GITS_TRANSLATOR or - The GICV2M single frame, containing the MSI_SETSP_NS register. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20200629070404.10969-6-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 7 +++++++ hw/arm/virt.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef enum VirtIOMMUType { VIRT_IOMMU_VIRTIO, } VirtIOMMUType; +typedef enum VirtMSIControllerType { + VIRT_MSI_CTRL_NONE, + VIRT_MSI_CTRL_GICV2M, + VIRT_MSI_CTRL_ITS, +} VirtMSIControllerType; + typedef enum VirtGICType { VIRT_GIC_VERSION_MAX, VIRT_GIC_VERSION_HOST, @@ -XXX,XX +XXX,XX @@ typedef struct { OnOffAuto acpi; VirtGICType gic_version; VirtIOMMUType iommu; + VirtMSIControllerType msi_controller; uint16_t virtio_iommu_bdf; struct arm_boot_info bootinfo; MemMapEntry *memmap; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_its(VirtMachineState *vms) sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_GIC_ITS].base); fdt_add_its_gic_node(vms); + vms->msi_controller = VIRT_MSI_CTRL_ITS; } static void create_v2m(VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_v2m(VirtMachineState *vms) } fdt_add_v2m_gic_node(vms); + vms->msi_controller = VIRT_MSI_CTRL_GICV2M; } static void create_gic(VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ out: static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { virt_memory_pre_plug(hotplug_dev, dev, errp); + } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { + hwaddr db_start = 0, db_end = 0; + char *resv_prop_str; + + switch (vms->msi_controller) { + case VIRT_MSI_CTRL_NONE: + return; + case VIRT_MSI_CTRL_ITS: + /* GITS_TRANSLATER page */ + db_start = base_memmap[VIRT_GIC_ITS].base + 0x10000; + db_end = base_memmap[VIRT_GIC_ITS].base + + base_memmap[VIRT_GIC_ITS].size - 1; + break; + case VIRT_MSI_CTRL_GICV2M: + /* MSI_SETSPI_NS page */ + db_start = base_memmap[VIRT_GIC_V2M].base; + db_end = db_start + base_memmap[VIRT_GIC_V2M].size - 1; + break; + } + resv_prop_str = g_strdup_printf("0x%"PRIx64":0x%"PRIx64":%u", + db_start, db_end, + VIRTIO_IOMMU_RESV_MEM_T_MSI); + + qdev_prop_set_uint32(dev, "len-reserved-regions", 1); + qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str); + g_free(resv_prop_str); } } -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> On ARMv7 & ARMv8 some load/store instructions might trigger a data abort exception with no valid ISS info to be decoded. The lack of decode info makes it at least tricky to emulate those instruction which is one of the (many) reasons why KVM will not even try to do so. Add support for handling those by requesting KVM to inject external dabt into the quest. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200629114110.30723-2-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ const KVMCapabilityInfo kvm_arch_required_capabilities[] = { static bool cap_has_mp_state; static bool cap_has_inject_serror_esr; +static bool cap_has_inject_ext_dabt; static ARMHostCPUFeatures arm_host_cpu_features; @@ -XXX,XX +XXX,XX @@ int kvm_arch_init(MachineState *ms, KVMState *s) ret = -EINVAL; } + if (kvm_check_extension(s, KVM_CAP_ARM_NISV_TO_USER)) { + if (kvm_vm_enable_cap(s, KVM_CAP_ARM_NISV_TO_USER, 0)) { + error_report("Failed to enable KVM_CAP_ARM_NISV_TO_USER cap"); + } else { + /* Set status for supporting the external dabt injection */ + cap_has_inject_ext_dabt = kvm_check_extension(s, + KVM_CAP_ARM_INJECT_EXT_DABT); + } + } + return ret; } @@ -XXX,XX +XXX,XX @@ void kvm_arm_vm_state_change(void *opaque, int running, RunState state) } } +/** + * kvm_arm_handle_dabt_nisv: + * @cs: CPUState + * @esr_iss: ISS encoding (limited) for the exception from Data Abort + * ISV bit set to '0b0' -> no valid instruction syndrome + * @fault_ipa: faulting address for the synchronous data abort + * + * Returns: 0 if the exception has been handled, < 0 otherwise + */ +static int kvm_arm_handle_dabt_nisv(CPUState *cs, uint64_t esr_iss, + uint64_t fault_ipa) +{ + /* + * Request KVM to inject the external data abort into the guest + */ + if (cap_has_inject_ext_dabt) { + struct kvm_vcpu_events events = { }; + /* + * The external data abort event will be handled immediately by KVM + * using the address fault that triggered the exit on given VCPU. + * Requesting injection of the external data abort does not rely + * on any other VCPU state. Therefore, in this particular case, the VCPU + * synchronization can be exceptionally skipped. + */ + events.exception.ext_dabt_pending = 1; + /* KVM_CAP_ARM_INJECT_EXT_DABT implies KVM_CAP_VCPU_EVENTS */ + return kvm_vcpu_ioctl(cs, KVM_SET_VCPU_EVENTS, &events); + } else { + error_report("Data abort exception triggered by guest memory access " + "at physical address: 0x" TARGET_FMT_lx, + (target_ulong)fault_ipa); + error_printf("KVM unable to emulate faulting instruction.\n"); + } + return -1; +} + int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) { int ret = 0; @@ -XXX,XX +XXX,XX @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) ret = EXCP_DEBUG; } /* otherwise return to guest */ break; + case KVM_EXIT_ARM_NISV: + /* External DABT with no valid iss to decode */ + ret = kvm_arm_handle_dabt_nisv(cs, run->arm_nisv.esr_iss, + run->arm_nisv.fault_ipa); + break; default: qemu_log_mask(LOG_UNIMP, "%s: un-handled exit reason %d\n", __func__, run->exit_reason); -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> Injecting external data abort through KVM might trigger an issue on kernels that do not get updated to include the KVM fix. For those and aarch32 guests, the injected abort gets misconfigured to be an implementation defined exception. This leads to the guest repeatedly re-running the faulting instruction. Add support for handling that case. [ Fixed-by: 018f22f95e8a ('KVM: arm: Fix DFSR setting for non-LPAE aarch32 guests') Fixed-by: 21aecdbd7f3a ('KVM: arm: Make inject_abt32() inject an external abort instead') ] Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Acked-by: Andrew Jones <drjones@redhat.com> Message-id: 20200629114110.30723-3-beata.michalska@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/kvm_arm.h | 10 +++++++++ target/arm/kvm.c | 30 ++++++++++++++++++++++++++- target/arm/kvm32.c | 34 ++++++++++++++++++++++++++++++ target/arm/kvm64.c | 49 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 124 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint64_t esr; } serror; + uint8_t ext_dabt_raised; /* Tracking/verifying injection of ext DABT */ + /* State of our input IRQ/FIQ/VIRQ/VFIQ lines */ uint32_t irq_line_state; diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ bool kvm_arm_hw_debug_active(CPUState *cs); struct kvm_guest_debug_arch; void kvm_arm_copy_hw_debug_data(struct kvm_guest_debug_arch *ptr); +/** + * kvm_arm_verify_ext_dabt_pending: + * @cs: CPUState + * + * Verify the fault status code wrt the Ext DABT injection + * + * Returns: true if the fault status code is as expected, false otherwise + */ +bool kvm_arm_verify_ext_dabt_pending(CPUState *cs); + /** * its_class_name: * diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ int kvm_get_vcpu_events(ARMCPU *cpu) void kvm_arch_pre_run(CPUState *cs, struct kvm_run *run) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + + if (unlikely(env->ext_dabt_raised)) { + /* + * Verifying that the ext DABT has been properly injected, + * otherwise risking indefinitely re-running the faulting instruction + * Covering a very narrow case for kernels 5.5..5.5.4 + * when injected abort was misconfigured to be + * an IMPLEMENTATION DEFINED exception (for 32-bit EL1) + */ + if (!arm_feature(env, ARM_FEATURE_AARCH64) && + unlikely(!kvm_arm_verify_ext_dabt_pending(cs))) { + + error_report("Data abort exception with no valid ISS generated by " + "guest memory access. KVM unable to emulate faulting " + "instruction. Failed to inject an external data abort " + "into the guest."); + abort(); + } + /* Clear the status */ + env->ext_dabt_raised = 0; + } } MemTxAttrs kvm_arch_post_run(CPUState *cs, struct kvm_run *run) @@ -XXX,XX +XXX,XX @@ void kvm_arm_vm_state_change(void *opaque, int running, RunState state) static int kvm_arm_handle_dabt_nisv(CPUState *cs, uint64_t esr_iss, uint64_t fault_ipa) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; /* * Request KVM to inject the external data abort into the guest */ @@ -XXX,XX +XXX,XX @@ static int kvm_arm_handle_dabt_nisv(CPUState *cs, uint64_t esr_iss, */ events.exception.ext_dabt_pending = 1; /* KVM_CAP_ARM_INJECT_EXT_DABT implies KVM_CAP_VCPU_EVENTS */ - return kvm_vcpu_ioctl(cs, KVM_SET_VCPU_EVENTS, &events); + if (!kvm_vcpu_ioctl(cs, KVM_SET_VCPU_EVENTS, &events)) { + env->ext_dabt_raised = 1; + return 0; + } } else { error_report("Data abort exception triggered by guest memory access " "at physical address: 0x" TARGET_FMT_lx, diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ void kvm_arm_pmu_init(CPUState *cs) { qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__); } + +#define ARM_REG_DFSR ARM_CP15_REG32(0, 5, 0, 0) +#define ARM_REG_TTBCR ARM_CP15_REG32(0, 2, 0, 2) +/* + *DFSR: + * TTBCR.EAE == 0 + * FS[4] - DFSR[10] + * FS[3:0] - DFSR[3:0] + * TTBCR.EAE == 1 + * FS, bits [5:0] + */ +#define DFSR_FSC(lpae, v) \ + ((lpae) ? ((v) & 0x3F) : (((v) >> 6) | ((v) & 0x1F))) + +#define DFSC_EXTABT(lpae) ((lpae) ? 0x10 : 0x08) + +bool kvm_arm_verify_ext_dabt_pending(CPUState *cs) +{ + uint32_t dfsr_val; + + if (!kvm_get_one_reg(cs, ARM_REG_DFSR, &dfsr_val)) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + uint32_t ttbcr; + int lpae = 0; + + if (!kvm_get_one_reg(cs, ARM_REG_TTBCR, &ttbcr)) { + lpae = arm_feature(env, ARM_FEATURE_LPAE) && (ttbcr & TTBCR_EAE); + } + /* The verification is based on FS filed of the DFSR reg only*/ + return (DFSR_FSC(lpae, dfsr_val) == DFSC_EXTABT(lpae)); + } + return false; +} diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit) return false; } + +#define ARM64_REG_ESR_EL1 ARM64_SYS_REG(3, 0, 5, 2, 0) +#define ARM64_REG_TCR_EL1 ARM64_SYS_REG(3, 0, 2, 0, 2) + +/* + * ESR_EL1 + * ISS encoding + * AARCH64: DFSC, bits [5:0] + * AARCH32: + * TTBCR.EAE == 0 + * FS[4] - DFSR[10] + * FS[3:0] - DFSR[3:0] + * TTBCR.EAE == 1 + * FS, bits [5:0] + */ +#define ESR_DFSC(aarch64, lpae, v) \ + ((aarch64 || (lpae)) ? ((v) & 0x3F) \ + : (((v) >> 6) | ((v) & 0x1F))) + +#define ESR_DFSC_EXTABT(aarch64, lpae) \ + ((aarch64) ? 0x10 : (lpae) ? 0x10 : 0x8) + +bool kvm_arm_verify_ext_dabt_pending(CPUState *cs) +{ + uint64_t dfsr_val; + + if (!kvm_get_one_reg(cs, ARM64_REG_ESR_EL1, &dfsr_val)) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + int aarch64_mode = arm_feature(env, ARM_FEATURE_AARCH64); + int lpae = 0; + + if (!aarch64_mode) { + uint64_t ttbcr; + + if (!kvm_get_one_reg(cs, ARM64_REG_TCR_EL1, &ttbcr)) { + lpae = arm_feature(env, ARM_FEATURE_LPAE) + && (ttbcr & TTBCR_EAE); + } + } + /* + * The verification here is based on the DFSC bits + * of the ESR_EL1 reg only + */ + return (ESR_DFSC(aarch64_mode, lpae, dfsr_val) == + ESR_DFSC_EXTABT(aarch64_mode, lpae)); + } + return false; +} -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Fixes: 93dd625f8bf7 ("tests/acpi: update expected data files") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20200629140938.17566-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,19 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/pc/DSDT", -"tests/data/acpi/pc/DSDT.acpihmat", -"tests/data/acpi/pc/DSDT.bridge", -"tests/data/acpi/pc/DSDT.cphp", -"tests/data/acpi/pc/DSDT.dimmpxm", -"tests/data/acpi/pc/DSDT.ipmikcs", -"tests/data/acpi/pc/DSDT.memhp", -"tests/data/acpi/pc/DSDT.numamem", -"tests/data/acpi/q35/DSDT", -"tests/data/acpi/q35/DSDT.acpihmat", -"tests/data/acpi/q35/DSDT.bridge", -"tests/data/acpi/q35/DSDT.cphp", -"tests/data/acpi/q35/DSDT.dimmpxm", -"tests/data/acpi/q35/DSDT.ipmibt", -"tests/data/acpi/q35/DSDT.memhp", -"tests/data/acpi/q35/DSDT.mmio64", -"tests/data/acpi/q35/DSDT.numamem", -"tests/data/acpi/q35/DSDT.tis", -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20200629140938.17566-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,4 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/DSDT", +"tests/data/acpi/virt/DSDT.memhp", +"tests/data/acpi/virt/DSDT.numamem", -- 2.20.1 From: Andrew Jones <drjones@redhat.com> The flash device is exclusively for the host-controlled firmware, so we should not expose it to the OS. Exposing it risks the OS messing with it, which could break firmware runtime services and surprise the OS when all its changes disappear after reboot. As firmware needs the device and uses DT, we leave the device exposed there. It's up to firmware to remove the nodes from DT before sending it on to the OS. However, there's no need to force firmware to remove tables from ACPI (which it doesn't know how to do anyway), so we simply don't add the tables in the first place. But, as we've been adding the tables for quite some time and don't want to change the default hardware exposed to versioned machines, then we only stop exposing the flash device tables for 5.1 and later machine types. Suggested-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20200629140938.17566-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + hw/arm/virt-acpi-build.c | 5 ++++- hw/arm/virt.c | 3 +++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef struct { bool no_highmem_ecam; bool no_ged; /* Machines < 4.2 has no support for ACPI GED device */ bool kvm_no_adjvtime; + bool acpi_expose_flash; } VirtMachineClass; typedef struct { diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void build_fadt_rev5(GArray *table_data, BIOSLinker *linker, static void build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) { + VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms); Aml *scope, *dsdt; MachineState *ms = MACHINE(vms); const MemMapEntry *memmap = vms->memmap; @@ -XXX,XX +XXX,XX @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) acpi_dsdt_add_cpus(scope, vms->smp_cpus); acpi_dsdt_add_uart(scope, &memmap[VIRT_UART], (irqmap[VIRT_UART] + ARM_SPI_BASE)); - acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]); + if (vmc->acpi_expose_flash) { + acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]); + } acpi_dsdt_add_fw_cfg(scope, &memmap[VIRT_FW_CFG]); acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO], (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 1) static void virt_machine_5_0_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_5_1_options(mc); compat_props_add(mc->compat_props, hw_compat_5_0, hw_compat_5_0_len); mc->numa_mem_supported = true; + vmc->acpi_expose_flash = true; } DEFINE_VIRT_MACHINE(5, 0) -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Differences between disassembled ASL files for DSDT: @@ -XXX,XX +XXX,XX @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of a, Mon Jun 29 09:50:01 2020 + * Disassembly of b, Mon Jun 29 09:50:03 2020 * * Original Table Header: * Signature "DSDT" - * Length 0x000014BB (5307) + * Length 0x00001455 (5205) * Revision 0x02 - * Checksum 0xD1 + * Checksum 0xE1 * OEM ID "BOCHS " * OEM Table ID "BXPCDSDT" * OEM Revision 0x00000001 (1) @@ -XXX,XX +XXX,XX @@ }) } - Device (FLS0) - { - Name (_HID, "LNRO0015") // _HID: Hardware ID - Name (_UID, Zero) // _UID: Unique ID - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - Memory32Fixed (ReadWrite, - 0x00000000, // Address Base - 0x04000000, // Address Length - ) - }) - } - - Device (FLS1) - { - Name (_HID, "LNRO0015") // _HID: Hardware ID - Name (_UID, One) // _UID: Unique ID - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - Memory32Fixed (ReadWrite, - 0x04000000, // Address Base - 0x04000000, // Address Length - ) - }) - } - Device (FWCF) { Name (_HID, "QEMU0002") // _HID: Hardware ID The other two binaries have the same changes (the removal of the flash devices). Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20200629140938.17566-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 --- tests/data/acpi/virt/DSDT | Bin 5307 -> 5205 bytes tests/data/acpi/virt/DSDT.memhp | Bin 6668 -> 6566 bytes tests/data/acpi/virt/DSDT.numamem | Bin 5307 -> 5205 bytes 4 files changed, 3 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,4 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/DSDT", -"tests/data/acpi/virt/DSDT.memhp", -"tests/data/acpi/virt/DSDT.numamem", diff --git a/tests/data/acpi/virt/DSDT b/tests/data/acpi/virt/DSDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmdn3c~yhUCD<h-RD^+n>ET2!X{H9}iRuX(-<}f&0DgxFc>n+a delta 156 zcmcbrv0IbNCD<iow+I6R)5VEg(oAih6V(&y4c&Z#4LIUGJY9Hw{DS-q3=B;fIO0P+ zU4W!>P_UpN7hfAE10w?juv9WcH-WSmV$;Hiu7w4t3#`S$E!^1+q9xGPH`KtuzzAr5 LaERl^1zUvy_;n(J diff --git a/tests/data/acpi/virt/DSDT.memhp b/tests/data/acpi/virt/DSDT.memhp index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmeA%S!T@T66_MPOp<|tiD@F2G*jb@iRuX(-^xn@0CHUjRR910 delta 156 zcmZ2x++)J!66_MfBgMeL^l>7WG*kP$iRuaUhHgH=1|0Doo-VvTenI{Q28N~#9Py!^ zE<n;bC|FRCi?5B7fsp|MSSlH!n?PC&v1wsM*TMqS1=eEW7Vhi@(GuwD8){%+U<5Qj LIK*+|0yaqism~!^ diff --git a/tests/data/acpi/virt/DSDT.numamem b/tests/data/acpi/virt/DSDT.numamem index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmdn3c~yhUCD<h-RD^+n>ET2!X{H9}iRuX(-<}f&0DgxFc>n+a delta 156 zcmcbrv0IbNCD<iow+I6R)5VEg(oAih6V(&y4c&Z#4LIUGJY9Hw{DS-q3=B;fIO0P+ zU4W!>P_UpN7hfAE10w?juv9WcH-WSmV$;Hiu7w4t3#`S$E!^1+q9xGPH`KtuzzAr5 LaERl^1zUvy_;n(J -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The temp that gets assigned to clean_addr has been allocated with new_tmp_a64, which means that it will be freed at the end of the instruction. Freeing it earlier leads to assertion failure. The loop creates a complication, in which we allocate a new local temp, which does need freeing, and the final code path is shared between the loop and non-loop. Fix this complication by adding new_tmp_a64_local so that the new local temp is freed at the end, and can be treated exactly like the non-loop path. Fixes: bba87d0a0f4 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200702175605.1987125-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 1 + target/arm/translate-a64.c | 6 ++++++ target/arm/translate-sve.c | 8 ++------ 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ void unallocated_encoding(DisasContext *s); } while (0) TCGv_i64 new_tmp_a64(DisasContext *s); +TCGv_i64 new_tmp_a64_local(DisasContext *s); TCGv_i64 new_tmp_a64_zero(DisasContext *s); TCGv_i64 cpu_reg(DisasContext *s, int reg); TCGv_i64 cpu_reg_sp(DisasContext *s, int reg); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ TCGv_i64 new_tmp_a64(DisasContext *s) return s->tmp_a64[s->tmp_a64_count++] = tcg_temp_new_i64(); } +TCGv_i64 new_tmp_a64_local(DisasContext *s) +{ + assert(s->tmp_a64_count < TMP_A64_MAX); + return s->tmp_a64[s->tmp_a64_count++] = tcg_temp_local_new_i64(); +} + TCGv_i64 new_tmp_a64_zero(DisasContext *s) { TCGv_i64 t = new_tmp_a64(s); diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) /* Copy the clean address into a local temp, live across the loop. */ t0 = clean_addr; - clean_addr = tcg_temp_local_new_i64(); + clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); - tcg_temp_free_i64(t0); gen_set_label(loop); @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) tcg_gen_st_i64(t0, cpu_env, vofs + len_align); tcg_temp_free_i64(t0); } - tcg_temp_free_i64(clean_addr); } /* Similarly for stores. */ @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) /* Copy the clean address into a local temp, live across the loop. */ t0 = clean_addr; - clean_addr = tcg_temp_local_new_i64(); + clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); - tcg_temp_free_i64(t0); gen_set_label(loop); @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) } tcg_temp_free_i64(t0); } - tcg_temp_free_i64(clean_addr); } static bool trans_LDR_zri(DisasContext *s, arg_rri *a) -- 2.20.1 In bcm2835_fb_mbox_push(), Coverity complains (CID 1429989) that we pass a pointer to a local struct to another function without initializing all its fields. This is a real bug: bcm2835_fb_reconfigure() copies the whole of our new BCM2385FBConfig struct into s->config, so any fields we don't initialize will corrupt the state of the device. Copy the two fields which we don't want to update (pixo and alpha) from the existing config so we don't accidentally change them. Fixes: cfb7ba983857e40e88 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628195436.27582-1-peter.maydell@linaro.org --- hw/display/bcm2835_fb.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/display/bcm2835_fb.c b/hw/display/bcm2835_fb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/bcm2835_fb.c +++ b/hw/display/bcm2835_fb.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_fb_mbox_push(BCM2835FBState *s, uint32_t value) newconf.base = s->vcram_base | (value & 0xc0000000); newconf.base += BCM2835_FB_OFFSET; + /* Copy fields which we don't want to change from the existing config */ + newconf.pixo = s->config.pixo; + newconf.alpha = s->config.alpha; + bcm2835_fb_validate_config(&newconf); pitch = bcm2835_fb_get_pitch(&newconf); -- 2.20.1 The spitz board has been around a long time, and still has a fair number of hard-coded tab characters in it. We're about to do some work on this source file, so start out by expanding out the tabs. This commit is a pure whitespace only change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-2-peter.maydell@linaro.org --- hw/arm/spitz.c | 156 ++++++++++++++++++++++++------------------------- 1 file changed, 78 insertions(+), 78 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #undef REG_FMT -#define REG_FMT "0x%02lx" +#define REG_FMT "0x%02lx" /* Spitz Flash */ -#define FLASH_BASE 0x0c000000 -#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ -#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ -#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ -#define FLASH_ECCCNTR 0x0c /* ECC byte counter */ -#define FLASH_ECCCLRR 0x10 /* Clear ECC */ -#define FLASH_FLASHIO 0x14 /* Flash I/O */ -#define FLASH_FLASHCTL 0x18 /* Flash Control */ +#define FLASH_BASE 0x0c000000 +#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ +#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ +#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ +#define FLASH_ECCCNTR 0x0c /* ECC byte counter */ +#define FLASH_ECCCLRR 0x10 /* Clear ECC */ +#define FLASH_FLASHIO 0x14 /* Flash I/O */ +#define FLASH_FLASHCTL 0x18 /* Flash Control */ -#define FLASHCTL_CE0 (1 << 0) -#define FLASHCTL_CLE (1 << 1) -#define FLASHCTL_ALE (1 << 2) -#define FLASHCTL_WP (1 << 3) -#define FLASHCTL_CE1 (1 << 4) -#define FLASHCTL_RYBY (1 << 5) -#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) +#define FLASHCTL_CE0 (1 << 0) +#define FLASHCTL_CLE (1 << 1) +#define FLASHCTL_ALE (1 << 2) +#define FLASHCTL_WP (1 << 3) +#define FLASHCTL_CE1 (1 << 4) +#define FLASHCTL_RYBY (1 << 5) +#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) #define TYPE_SL_NAND "sl-nand" #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND) @@ -XXX,XX +XXX,XX @@ static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) int ryby; switch (addr) { -#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) +#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) case FLASH_ECCLPLB: return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) | BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7); -#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) +#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) case FLASH_ECCLPUB: return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) | BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7); @@ -XXX,XX +XXX,XX @@ static void sl_nand_realize(DeviceState *dev, Error **errp) /* Spitz Keyboard */ -#define SPITZ_KEY_STROBE_NUM 11 -#define SPITZ_KEY_SENSE_NUM 7 +#define SPITZ_KEY_STROBE_NUM 11 +#define SPITZ_KEY_SENSE_NUM 7 static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = { 12, 17, 91, 34, 36, 38, 39 @@ -XXX,XX +XXX,XX @@ static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = { { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 }, }; -#define SPITZ_GPIO_AK_INT 13 /* Remote control */ -#define SPITZ_GPIO_SYNC 16 /* Sync button */ -#define SPITZ_GPIO_ON_KEY 95 /* Power button */ -#define SPITZ_GPIO_SWA 97 /* Lid */ -#define SPITZ_GPIO_SWB 96 /* Tablet mode */ +#define SPITZ_GPIO_AK_INT 13 /* Remote control */ +#define SPITZ_GPIO_SYNC 16 /* Sync button */ +#define SPITZ_GPIO_ON_KEY 95 /* Power button */ +#define SPITZ_GPIO_SWA 97 /* Lid */ +#define SPITZ_GPIO_SWB 96 /* Tablet mode */ /* The special buttons are mapped to unused keys */ static const int spitz_gpiomap[5] = { @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode) #define SPITZ_MOD_CTRL (1 << 8) #define SPITZ_MOD_FN (1 << 9) -#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c +#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c static void spitz_keyboard_handler(void *opaque, int keycode) { @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_handler(void *opaque, int keycode) uint16_t code; int mapcode; switch (keycode) { - case 0x2a: /* Left Shift */ + case 0x2a: /* Left Shift */ s->modifiers |= 1; break; case 0xaa: s->modifiers &= ~1; break; - case 0x36: /* Right Shift */ + case 0x36: /* Right Shift */ s->modifiers |= 2; break; case 0xb6: s->modifiers &= ~2; break; - case 0x1d: /* Control */ + case 0x1d: /* Control */ s->modifiers |= 4; break; case 0x9d: s->modifiers &= ~4; break; - case 0x38: /* Alt */ + case 0x38: /* Alt */ s->modifiers |= 8; break; case 0xb8: @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_realize(DeviceState *dev, Error **errp) /* LCD backlight controller */ -#define LCDTG_RESCTL 0x00 -#define LCDTG_PHACTRL 0x01 -#define LCDTG_DUTYCTRL 0x02 -#define LCDTG_POWERREG0 0x03 -#define LCDTG_POWERREG1 0x04 -#define LCDTG_GPOR3 0x05 -#define LCDTG_PICTRL 0x06 -#define LCDTG_POLCTRL 0x07 +#define LCDTG_RESCTL 0x00 +#define LCDTG_PHACTRL 0x01 +#define LCDTG_DUTYCTRL 0x02 +#define LCDTG_POWERREG0 0x03 +#define LCDTG_POWERREG1 0x04 +#define LCDTG_GPOR3 0x05 +#define LCDTG_PICTRL 0x06 +#define LCDTG_POLCTRL 0x07 typedef struct { SSISlave ssidev; @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_realize(SSISlave *dev, Error **errp) /* SSP devices */ -#define CORGI_SSP_PORT 2 +#define CORGI_SSP_PORT 2 -#define SPITZ_GPIO_LCDCON_CS 53 -#define SPITZ_GPIO_ADS7846_CS 14 -#define SPITZ_GPIO_MAX1111_CS 20 -#define SPITZ_GPIO_TP_INT 11 +#define SPITZ_GPIO_LCDCON_CS 53 +#define SPITZ_GPIO_ADS7846_CS 14 +#define SPITZ_GPIO_MAX1111_CS 20 +#define SPITZ_GPIO_TP_INT 11 static DeviceState *max1111; @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) s->enable[line] = !level; } -#define MAX1111_BATT_VOLT 1 -#define MAX1111_BATT_TEMP 2 -#define MAX1111_ACIN_VOLT 3 +#define MAX1111_BATT_VOLT 1 +#define MAX1111_BATT_TEMP 2 +#define MAX1111_ACIN_VOLT 3 -#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ -#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ -#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ +#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ +#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ +#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ static void spitz_adc_temp_on(void *opaque, int line, int level) { @@ -XXX,XX +XXX,XX @@ static void spitz_microdrive_attach(PXA2xxState *cpu, int slot) /* Wm8750 and Max7310 on I2C */ -#define AKITA_MAX_ADDR 0x18 -#define SPITZ_WM_ADDRL 0x1b -#define SPITZ_WM_ADDRH 0x1a +#define AKITA_MAX_ADDR 0x18 +#define SPITZ_WM_ADDRL 0x1b +#define SPITZ_WM_ADDRH 0x1a -#define SPITZ_GPIO_WM 5 +#define SPITZ_GPIO_WM 5 static void spitz_wm8750_addr(void *opaque, int line, int level) { @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) } } -#define SPITZ_SCP_LED_GREEN 1 -#define SPITZ_SCP_JK_B 2 -#define SPITZ_SCP_CHRG_ON 3 -#define SPITZ_SCP_MUTE_L 4 -#define SPITZ_SCP_MUTE_R 5 -#define SPITZ_SCP_CF_POWER 6 -#define SPITZ_SCP_LED_ORANGE 7 -#define SPITZ_SCP_JK_A 8 -#define SPITZ_SCP_ADC_TEMP_ON 9 -#define SPITZ_SCP2_IR_ON 1 -#define SPITZ_SCP2_AKIN_PULLUP 2 -#define SPITZ_SCP2_BACKLIGHT_CONT 7 -#define SPITZ_SCP2_BACKLIGHT_ON 8 -#define SPITZ_SCP2_MIC_BIAS 9 +#define SPITZ_SCP_LED_GREEN 1 +#define SPITZ_SCP_JK_B 2 +#define SPITZ_SCP_CHRG_ON 3 +#define SPITZ_SCP_MUTE_L 4 +#define SPITZ_SCP_MUTE_R 5 +#define SPITZ_SCP_CF_POWER 6 +#define SPITZ_SCP_LED_ORANGE 7 +#define SPITZ_SCP_JK_A 8 +#define SPITZ_SCP_ADC_TEMP_ON 9 +#define SPITZ_SCP2_IR_ON 1 +#define SPITZ_SCP2_AKIN_PULLUP 2 +#define SPITZ_SCP2_BACKLIGHT_CONT 7 +#define SPITZ_SCP2_BACKLIGHT_ON 8 +#define SPITZ_SCP2_MIC_BIAS 9 static void spitz_scoop_gpio_setup(PXA2xxState *cpu, DeviceState *scp0, DeviceState *scp1) @@ -XXX,XX +XXX,XX @@ static void spitz_scoop_gpio_setup(PXA2xxState *cpu, qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); } -#define SPITZ_GPIO_HSYNC 22 -#define SPITZ_GPIO_SD_DETECT 9 -#define SPITZ_GPIO_SD_WP 81 -#define SPITZ_GPIO_ON_RESET 89 -#define SPITZ_GPIO_BAT_COVER 90 -#define SPITZ_GPIO_CF1_IRQ 105 -#define SPITZ_GPIO_CF1_CD 94 -#define SPITZ_GPIO_CF2_IRQ 106 -#define SPITZ_GPIO_CF2_CD 93 +#define SPITZ_GPIO_HSYNC 22 +#define SPITZ_GPIO_SD_DETECT 9 +#define SPITZ_GPIO_SD_WP 81 +#define SPITZ_GPIO_ON_RESET 89 +#define SPITZ_GPIO_BAT_COVER 90 +#define SPITZ_GPIO_CF1_IRQ 105 +#define SPITZ_GPIO_CF1_CD 94 +#define SPITZ_GPIO_CF2_IRQ 106 +#define SPITZ_GPIO_CF2_CD 93 static int spitz_hsync; @@ -XXX,XX +XXX,XX @@ static void spitz_gpio_setup(PXA2xxState *cpu, int slots) /* Board init. */ enum spitz_model_e { spitz, akita, borzoi, terrier }; -#define SPITZ_RAM 0x04000000 -#define SPITZ_ROM 0x00800000 +#define SPITZ_RAM 0x04000000 +#define SPITZ_ROM 0x00800000 static struct arm_boot_info spitz_binfo = { .loader_start = PXA2XX_SDRAM_BASE, -- 2.20.1 For the four Spitz-family machines (akita, borzoi, spitz, terrier) create a proper abstract class SpitzMachineClass which encapsulates the common behaviour, rather than having them all derive directly from TYPE_MACHINE: * instead of each machine class setting mc->init to a wrapper function which calls spitz_common_init() with parameters, put that data in the SpitzMachineClass and make spitz_common_init the SpitzMachineClass machine-init function * move the settings of mc->block_default_type and mc->ignore_memory_transaction_failures into the SpitzMachineClass class init rather than repeating them in each machine's class init (The motivation is that we're going to want to keep some state in the SpitzMachineState so we can connect GPIOs between devices created in one sub-function of the machine init to devices created in a different sub-function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-3-peter.maydell@linaro.org --- hw/arm/spitz.c | 91 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 55 insertions(+), 36 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "cpu.h" +enum spitz_model_e { spitz, akita, borzoi, terrier }; + +typedef struct { + MachineClass parent; + enum spitz_model_e model; + int arm_id; +} SpitzMachineClass; + +typedef struct { + MachineState parent; +} SpitzMachineState; + +#define TYPE_SPITZ_MACHINE "spitz-common" +#define SPITZ_MACHINE(obj) \ + OBJECT_CHECK(SpitzMachineState, obj, TYPE_SPITZ_MACHINE) +#define SPITZ_MACHINE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(SpitzMachineClass, obj, TYPE_SPITZ_MACHINE) +#define SPITZ_MACHINE_CLASS(klass) \ + OBJECT_CLASS_CHECK(SpitzMachineClass, klass, TYPE_SPITZ_MACHINE) + #undef REG_FMT #define REG_FMT "0x%02lx" @@ -XXX,XX +XXX,XX @@ static void spitz_gpio_setup(PXA2xxState *cpu, int slots) } /* Board init. */ -enum spitz_model_e { spitz, akita, borzoi, terrier }; - #define SPITZ_RAM 0x04000000 #define SPITZ_ROM 0x00800000 @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info spitz_binfo = { .ram_size = 0x04000000, }; -static void spitz_common_init(MachineState *machine, - enum spitz_model_e model, int arm_id) +static void spitz_common_init(MachineState *machine) { + SpitzMachineClass *smc = SPITZ_MACHINE_GET_CLASS(machine); + enum spitz_model_e model = smc->model; PXA2xxState *mpu; DeviceState *scp0, *scp1 = NULL; MemoryRegion *address_space_mem = get_system_memory(); @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine, /* A 4.0 GB microdrive is permanently sitting in CF slot 0. */ spitz_microdrive_attach(mpu, 0); - spitz_binfo.board_id = arm_id; + spitz_binfo.board_id = smc->arm_id; arm_load_kernel(mpu->cpu, machine, &spitz_binfo); sl_bootparam_write(SL_PXA_PARAM_BASE); } -static void spitz_init(MachineState *machine) +static void spitz_common_class_init(ObjectClass *oc, void *data) { - spitz_common_init(machine, spitz, 0x2c9); + MachineClass *mc = MACHINE_CLASS(oc); + + mc->block_default_type = IF_IDE; + mc->ignore_memory_transaction_failures = true; + mc->init = spitz_common_init; } -static void borzoi_init(MachineState *machine) -{ - spitz_common_init(machine, borzoi, 0x33f); -} - -static void akita_init(MachineState *machine) -{ - spitz_common_init(machine, akita, 0x2e8); -} - -static void terrier_init(MachineState *machine) -{ - spitz_common_init(machine, terrier, 0x33f); -} +static const TypeInfo spitz_common_info = { + .name = TYPE_SPITZ_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(SpitzMachineState), + .class_size = sizeof(SpitzMachineClass), + .class_init = spitz_common_class_init, +}; static void akitapda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C1000 (Akita) PDA (PXA270)"; - mc->init = akita_init; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); + smc->model = akita; + smc->arm_id = 0x2e8; } static const TypeInfo akitapda_type = { .name = MACHINE_TYPE_NAME("akita"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = akitapda_class_init, }; static void spitzpda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3000 (Spitz) PDA (PXA270)"; - mc->init = spitz_init; - mc->block_default_type = IF_IDE; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); + smc->model = spitz; + smc->arm_id = 0x2c9; } static const TypeInfo spitzpda_type = { .name = MACHINE_TYPE_NAME("spitz"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = spitzpda_class_init, }; static void borzoipda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3100 (Borzoi) PDA (PXA270)"; - mc->init = borzoi_init; - mc->block_default_type = IF_IDE; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); + smc->model = borzoi; + smc->arm_id = 0x33f; } static const TypeInfo borzoipda_type = { .name = MACHINE_TYPE_NAME("borzoi"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = borzoipda_class_init, }; static void terrierpda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3200 (Terrier) PDA (PXA270)"; - mc->init = terrier_init; - mc->block_default_type = IF_IDE; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5"); + smc->model = terrier; + smc->arm_id = 0x33f; } static const TypeInfo terrierpda_type = { .name = MACHINE_TYPE_NAME("terrier"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = terrierpda_class_init, }; static void spitz_machine_init(void) { + type_register_static(&spitz_common_info); type_register_static(&akitapda_type); type_register_static(&spitzpda_type); type_register_static(&borzoipda_type); -- 2.20.1 Keep pointers to the MPU and the SSI devices in SpitzMachineState. We're going to want to make GPIO connections between some of the SSI devices and the SCPs, so we want to keep hold of a pointer to those; putting the MPU into the struct allows us to pass just one thing to spitz_ssp_attach() rather than two. We have to retain the setting of the global "max1111" variable for the moment as it is used in spitz_adc_temp_on(); later in this series of commits we will be able to remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-4-peter.maydell@linaro.org --- hw/arm/spitz.c | 50 ++++++++++++++++++++++++++++---------------------- 1 file changed, 28 insertions(+), 22 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { typedef struct { MachineState parent; + PXA2xxState *mpu; + DeviceState *mux; + DeviceState *lcdtg; + DeviceState *ads7846; + DeviceState *max1111; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_realize(SSISlave *d, Error **errp) s->bus[2] = ssi_create_bus(dev, "ssi2"); } -static void spitz_ssp_attach(PXA2xxState *cpu) +static void spitz_ssp_attach(SpitzMachineState *sms) { - DeviceState *mux; - DeviceState *dev; void *bus; - mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); + sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); - bus = qdev_get_child_bus(mux, "ssi0"); - ssi_create_slave(bus, "spitz-lcdtg"); + bus = qdev_get_child_bus(sms->mux, "ssi0"); + sms->lcdtg = ssi_create_slave(bus, "spitz-lcdtg"); - bus = qdev_get_child_bus(mux, "ssi1"); - dev = ssi_create_slave(bus, "ads7846"); - qdev_connect_gpio_out(dev, 0, - qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_TP_INT)); + bus = qdev_get_child_bus(sms->mux, "ssi1"); + sms->ads7846 = ssi_create_slave(bus, "ads7846"); + qdev_connect_gpio_out(sms->ads7846, 0, + qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); - bus = qdev_get_child_bus(mux, "ssi2"); - max1111 = ssi_create_slave(bus, "max1111"); - max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); - max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); - max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); + bus = qdev_get_child_bus(sms->mux, "ssi2"); + sms->max1111 = ssi_create_slave(bus, "max1111"); + max1111 = sms->max1111; + max111x_set_input(sms->max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); + max111x_set_input(sms->max1111, MAX1111_BATT_TEMP, 0); + max111x_set_input(sms->max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); - qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_LCDCON_CS, - qdev_get_gpio_in(mux, 0)); - qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ADS7846_CS, - qdev_get_gpio_in(mux, 1)); - qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_MAX1111_CS, - qdev_get_gpio_in(mux, 2)); + qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_LCDCON_CS, + qdev_get_gpio_in(sms->mux, 0)); + qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_ADS7846_CS, + qdev_get_gpio_in(sms->mux, 1)); + qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_MAX1111_CS, + qdev_get_gpio_in(sms->mux, 2)); } /* CF Microdrive */ @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info spitz_binfo = { static void spitz_common_init(MachineState *machine) { SpitzMachineClass *smc = SPITZ_MACHINE_GET_CLASS(machine); + SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; DeviceState *scp0, *scp1 = NULL; @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) /* Setup CPU & memory */ mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, machine->cpu_type); + sms->mpu = mpu; sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) /* Setup peripherals */ spitz_keyboard_register(mpu); - spitz_ssp_attach(mpu); + spitz_ssp_attach(sms); scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); if (model != akita) { -- 2.20.1 Keep pointers to scp0, scp1 in SpitzMachineState, and just pass that to spitz_scoop_gpio_setup(). (We'll want to use some of the other fields in SpitzMachineState in that function in the next commit.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-5-peter.maydell@linaro.org --- hw/arm/spitz.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { DeviceState *lcdtg; DeviceState *ads7846; DeviceState *max1111; + DeviceState *scp0; + DeviceState *scp1; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) #define SPITZ_SCP2_BACKLIGHT_ON 8 #define SPITZ_SCP2_MIC_BIAS 9 -static void spitz_scoop_gpio_setup(PXA2xxState *cpu, - DeviceState *scp0, DeviceState *scp1) +static void spitz_scoop_gpio_setup(SpitzMachineState *sms) { - qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8); + qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, sms->mpu, 8); - qdev_connect_gpio_out(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); - qdev_connect_gpio_out(scp0, SPITZ_SCP_JK_B, outsignals[1]); - qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); - qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, outsignals[1]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); - if (scp1) { - qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]); - qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]); + if (sms->scp1) { + qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, + outsignals[4]); + qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, + outsignals[5]); } - qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); } #define SPITZ_GPIO_HSYNC 22 @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; - DeviceState *scp0, *scp1 = NULL; MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *rom = g_new(MemoryRegion, 1); @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) spitz_ssp_attach(sms); - scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); + sms->scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); if (model != akita) { - scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); + sms->scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); + } else { + sms->scp1 = NULL; } - spitz_scoop_gpio_setup(mpu, scp0, scp1); + spitz_scoop_gpio_setup(sms); spitz_gpio_setup(mpu, (model == akita) ? 1 : 2); -- 2.20.1 Currently the Spitz board uses a nasty hack for the GPIO lines that pass "bit5" and "power" information to the LCD controller: the lcdtg realize function sets a global variable to point to the instance it just realized, and then the functions spitz_bl_power() and spitz_bl_bit5() use that to find the device they are changing the internal state of. There is a comment reading: FIXME: Implement GPIO properly and remove this hack. which was added in 2009. Implement GPIO properly and remove this hack. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-6-peter.maydell@linaro.org --- hw/arm/spitz.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_bl_update(SpitzLCDTG *s) zaurus_printf("LCD Backlight now off\n"); } -/* FIXME: Implement GPIO properly and remove this hack. */ -static SpitzLCDTG *spitz_lcdtg; - static inline void spitz_bl_bit5(void *opaque, int line, int level) { - SpitzLCDTG *s = spitz_lcdtg; + SpitzLCDTG *s = opaque; int prev = s->bl_intensity; if (level) @@ -XXX,XX +XXX,XX @@ static inline void spitz_bl_bit5(void *opaque, int line, int level) static inline void spitz_bl_power(void *opaque, int line, int level) { - SpitzLCDTG *s = spitz_lcdtg; + SpitzLCDTG *s = opaque; s->bl_power = !!level; spitz_bl_update(s); } @@ -XXX,XX +XXX,XX @@ static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) return 0; } -static void spitz_lcdtg_realize(SSISlave *dev, Error **errp) +static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) { - SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); + SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, ssi); + DeviceState *dev = DEVICE(s); - spitz_lcdtg = s; s->bl_power = 0; s->bl_intensity = 0x20; + + qdev_init_gpio_in_named(dev, spitz_bl_bit5, "bl_bit5", 1); + qdev_init_gpio_in_named(dev, spitz_bl_power, "bl_power", 1); } /* SSP devices */ @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) case 3: zaurus_printf("Orange LED %s.\n", level ? "on" : "off"); break; - case 4: - spitz_bl_bit5(opaque, line, level); - break; - case 5: - spitz_bl_power(opaque, line, level); - break; case 6: spitz_adc_temp_on(opaque, line, level); break; + default: + g_assert_not_reached(); } } @@ -XXX,XX +XXX,XX @@ static void spitz_scoop_gpio_setup(SpitzMachineState *sms) if (sms->scp1) { qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, - outsignals[4]); + qdev_get_gpio_in_named(sms->lcdtg, "bl_bit5", 0)); qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, - outsignals[5]); + qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0)); } qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); -- 2.20.1 Add some QOM properties to the max111x ADC device to allow the initial values to be configured. Currently this is done by board code calling max111x_set_input() after it creates the device, which doesn't work on system reset. This requires us to implement a reset method for this device, so while we're doing that make sure we reset the other parts of the device state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-7-peter.maydell@linaro.org --- hw/misc/max111x.c | 57 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 47 insertions(+), 10 deletions(-) diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ #include "hw/ssi/ssi.h" #include "migration/vmstate.h" #include "qemu/module.h" +#include "hw/qdev-properties.h" typedef struct { SSISlave parent_obj; qemu_irq interrupt; + /* Values of inputs at system reset (settable by QOM property) */ + uint8_t reset_input[8]; + uint8_t tb1, rb2, rb3; int cycle; @@ -XXX,XX +XXX,XX @@ static int max111x_init(SSISlave *d, int inputs) qdev_init_gpio_out(dev, &s->interrupt, 1); s->inputs = inputs; - /* TODO: add a user interface for setting these */ - s->input[0] = 0xf0; - s->input[1] = 0xe0; - s->input[2] = 0xd0; - s->input[3] = 0xc0; - s->input[4] = 0xb0; - s->input[5] = 0xa0; - s->input[6] = 0x90; - s->input[7] = 0x80; - s->com = 0; vmstate_register(VMSTATE_IF(dev), VMSTATE_INSTANCE_ID_ANY, &vmstate_max111x, s); @@ -XXX,XX +XXX,XX @@ void max111x_set_input(DeviceState *dev, int line, uint8_t value) s->input[line] = value; } +static void max111x_reset(DeviceState *dev) +{ + MAX111xState *s = MAX_111X(dev); + int i; + + for (i = 0; i < s->inputs; i++) { + s->input[i] = s->reset_input[i]; + } + s->com = 0; + s->tb1 = 0; + s->rb2 = 0; + s->rb3 = 0; + s->cycle = 0; +} + +static Property max1110_properties[] = { + /* Reset values for ADC inputs */ + DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), + DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), + DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), + DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), + DEFINE_PROP_END_OF_LIST(), +}; + +static Property max1111_properties[] = { + /* Reset values for ADC inputs */ + DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), + DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), + DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), + DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), + DEFINE_PROP_UINT8("input4", MAX111xState, reset_input[4], 0xb0), + DEFINE_PROP_UINT8("input5", MAX111xState, reset_input[5], 0xa0), + DEFINE_PROP_UINT8("input6", MAX111xState, reset_input[6], 0x90), + DEFINE_PROP_UINT8("input7", MAX111xState, reset_input[7], 0x80), + DEFINE_PROP_END_OF_LIST(), +}; + static void max111x_class_init(ObjectClass *klass, void *data) { SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); k->transfer = max111x_transfer; + dc->reset = max111x_reset; } static const TypeInfo max111x_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo max111x_info = { static void max1110_class_init(ObjectClass *klass, void *data) { SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); k->realize = max1110_realize; + device_class_set_props(dc, max1110_properties); } static const TypeInfo max1110_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo max1110_info = { static void max1111_class_init(ObjectClass *klass, void *data) { SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); k->realize = max1111_realize; + device_class_set_props(dc, max1111_properties); } static const TypeInfo max1111_info = { -- 2.20.1 The max111x is a proper qdev device; we can use dc->vmsd rather than directly calling vmstate_register(). It's possible that this is a migration compat break, but the only boards that use this device are the spitz-family ('akita', 'borzoi', 'spitz', 'terrier'). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-8-peter.maydell@linaro.org --- hw/misc/max111x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ static int max111x_init(SSISlave *d, int inputs) s->inputs = inputs; - vmstate_register(VMSTATE_IF(dev), VMSTATE_INSTANCE_ID_ANY, - &vmstate_max111x, s); return 0; } @@ -XXX,XX +XXX,XX @@ static void max111x_class_init(ObjectClass *klass, void *data) k->transfer = max111x_transfer; dc->reset = max111x_reset; + dc->vmsd = &vmstate_max111x; } static const TypeInfo max111x_info = { -- 2.20.1 Add an ssi_realize_and_unref(), for the benefit of callers who want to be able to create an SSI device, set QOM properties on it, and then do the realize-and-unref afterwards. The API works on the same principle as the recently added qdev_realize_and_undef(), sysbus_realize_and_undef(), etc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-9-peter.maydell@linaro.org --- include/hw/ssi/ssi.h | 26 ++++++++++++++++++++++++++ hw/ssi/ssi.c | 7 ++++++- 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/ssi.h +++ b/include/hw/ssi/ssi.h @@ -XXX,XX +XXX,XX @@ extern const VMStateDescription vmstate_ssi_slave; } DeviceState *ssi_create_slave(SSIBus *bus, const char *name); +/** + * ssi_realize_and_unref: realize and unref an SSI slave device + * @dev: SSI slave device to realize + * @bus: SSI bus to put it on + * @errp: error pointer + * + * Call 'realize' on @dev, put it on the specified @bus, and drop the + * reference to it. Errors are reported via @errp and by returning + * false. + * + * This function is useful if you have created @dev via qdev_new() + * (which takes a reference to the device it returns to you), so that + * you can set properties on it before realizing it. If you don't need + * to set properties then ssi_create_slave() is probably better (as it + * does the create, init and realize in one step). + * + * If you are embedding the SSI slave into another QOM device and + * initialized it via some variant on object_initialize_child() then + * do not use this function, because that family of functions arrange + * for the only reference to the child device to be held by the parent + * via the child<> property, and so the reference-count-drop done here + * would be incorrect. (Instead you would want ssi_realize(), which + * doesn't currently exist but would be trivial to create if we had + * any code that wanted it.) + */ +bool ssi_realize_and_unref(DeviceState *dev, SSIBus *bus, Error **errp); /* Master interface. */ SSIBus *ssi_create_bus(DeviceState *parent, const char *name); diff --git a/hw/ssi/ssi.c b/hw/ssi/ssi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/ssi.c +++ b/hw/ssi/ssi.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo ssi_slave_info = { .abstract = true, }; +bool ssi_realize_and_unref(DeviceState *dev, SSIBus *bus, Error **errp) +{ + return qdev_realize_and_unref(dev, &bus->parent_obj, errp); +} + DeviceState *ssi_create_slave(SSIBus *bus, const char *name) { DeviceState *dev = qdev_new(name); - qdev_realize_and_unref(dev, &bus->parent_obj, &error_fatal); + ssi_realize_and_unref(dev, bus, &error_fatal); return dev; } -- 2.20.1 Use the new max111x qdev properties to set the initial input values rather than calling max111x_set_input(); this means that on system reset the inputs will correctly return to their initial values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-10-peter.maydell@linaro.org --- hw/arm/spitz.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); bus = qdev_get_child_bus(sms->mux, "ssi2"); - sms->max1111 = ssi_create_slave(bus, "max1111"); + sms->max1111 = qdev_new("max1111"); max1111 = sms->max1111; - max111x_set_input(sms->max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); - max111x_set_input(sms->max1111, MAX1111_BATT_TEMP, 0); - max111x_set_input(sms->max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); + qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, + SPITZ_BATTERY_VOLT); + qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0); + qdev_prop_set_uint8(sms->max1111, "input3" /* ACIN_VOLT */, + SPITZ_CHARGEON_ACIN); + ssi_realize_and_unref(sms->max1111, bus, &error_fatal); qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_LCDCON_CS, qdev_get_gpio_in(sms->mux, 0)); -- 2.20.1 The max111x ADC device model allows other code to set the level on the 8 ADC inputs using the max111x_set_input() function. Replace this with generic qdev GPIO inputs, which also allow inputs to be set to arbitrary values. Using GPIO lines will make it easier for board code to wire things up, so that if device A wants to set the ADC input it doesn't need to have a direct pointer to the max111x but can just set that value on its output GPIO, which is then wired up by the board to the appropriate max111x input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-11-peter.maydell@linaro.org --- include/hw/ssi/ssi.h | 3 --- hw/arm/spitz.c | 9 +++++---- hw/misc/max111x.c | 16 +++++++++------- 3 files changed, 14 insertions(+), 14 deletions(-) diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/ssi.h +++ b/include/hw/ssi/ssi.h @@ -XXX,XX +XXX,XX @@ SSIBus *ssi_create_bus(DeviceState *parent, const char *name); uint32_t ssi_transfer(SSIBus *bus, uint32_t val); -/* max111x.c */ -void max111x_set_input(DeviceState *dev, int line, uint8_t value); - #endif diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) static void spitz_adc_temp_on(void *opaque, int line, int level) { + int batt_temp; + if (!max1111) return; - if (level) - max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP); - else - max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); + batt_temp = level ? SPITZ_BATTERY_TEMP : 0; + + qemu_set_irq(qdev_get_gpio_in(max1111, MAX1111_BATT_TEMP), batt_temp); } static void corgi_ssp_realize(SSISlave *d, Error **errp) diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_max111x = { } }; +static void max111x_input_set(void *opaque, int line, int value) +{ + MAX111xState *s = MAX_111X(opaque); + + assert(line >= 0 && line < s->inputs); + s->input[line] = value; +} + static int max111x_init(SSISlave *d, int inputs) { DeviceState *dev = DEVICE(d); MAX111xState *s = MAX_111X(dev); qdev_init_gpio_out(dev, &s->interrupt, 1); + qdev_init_gpio_in(dev, max111x_input_set, inputs); s->inputs = inputs; @@ -XXX,XX +XXX,XX @@ static void max1111_realize(SSISlave *dev, Error **errp) max111x_init(dev, 4); } -void max111x_set_input(DeviceState *dev, int line, uint8_t value) -{ - MAX111xState *s = MAX_111X(dev); - assert(line >= 0 && line < s->inputs); - s->input[line] = value; -} - static void max111x_reset(DeviceState *dev) { MAX111xState *s = MAX_111X(dev); -- 2.20.1 Create a header file for the hw/misc/max111x device, in the usual modern style for QOM devices: * definition of the TYPE_ constants and macros * definition of the device's state struct so that it can be embedded in other structs if desired * documentation of the interface This allows us to use TYPE_MAX_1111 in the spitz.c code rather than the string "max1111". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-12-peter.maydell@linaro.org --- include/hw/misc/max111x.h | 56 +++++++++++++++++++++++++++++++++++++++ hw/arm/spitz.c | 3 ++- hw/misc/max111x.c | 24 +---------------- MAINTAINERS | 1 + 4 files changed, 60 insertions(+), 24 deletions(-) create mode 100644 include/hw/misc/max111x.h diff --git a/include/hw/misc/max111x.h b/include/hw/misc/max111x.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/max111x.h @@ -XXX,XX +XXX,XX @@ +/* + * Maxim MAX1110/1111 ADC chip emulation. + * + * Copyright (c) 2006 Openedhand Ltd. + * Written by Andrzej Zaborowski <balrog@zabor.org> + * + * This code is licensed under the GNU GPLv2. + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#ifndef HW_MISC_MAX111X_H +#define HW_MISC_MAX111X_H + +#include "hw/ssi/ssi.h" + +/* + * This is a model of the Maxim MAX1110/1111 ADC chip, which for QEMU + * is an SSI slave device. It has either 4 (max1110) or 8 (max1111) + * 8-bit ADC channels. + * + * QEMU interface: + * + GPIO inputs 0..3 (for max1110) or 0..7 (for max1111): set the value + * of each ADC input, as an unsigned 8-bit value + * + GPIO output 0: interrupt line + * + Properties "input0" to "input3" (max1110) or "input0" to "input7" + * (max1111): initial reset values for ADC inputs. + * + * Known bugs: + * + the interrupt line is not correctly implemented, and will never + * be lowered once it has been asserted. + */ +typedef struct { + SSISlave parent_obj; + + qemu_irq interrupt; + /* Values of inputs at system reset (settable by QOM property) */ + uint8_t reset_input[8]; + + uint8_t tb1, rb2, rb3; + int cycle; + + uint8_t input[8]; + int inputs, com; +} MAX111xState; + +#define TYPE_MAX_111X "max111x" + +#define MAX_111X(obj) \ + OBJECT_CHECK(MAX111xState, (obj), TYPE_MAX_111X) + +#define TYPE_MAX_1110 "max1110" +#define TYPE_MAX_1111 "max1111" + +#endif diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "hw/boards.h" #include "hw/sysbus.h" +#include "hw/misc/max111x.h" #include "migration/vmstate.h" #include "exec/address-spaces.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); bus = qdev_get_child_bus(sms->mux, "ssi2"); - sms->max1111 = qdev_new("max1111"); + sms->max1111 = qdev_new(TYPE_MAX_1111); max1111 = sms->max1111; qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, SPITZ_BATTERY_VOLT); diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "hw/misc/max111x.h" #include "hw/irq.h" -#include "hw/ssi/ssi.h" #include "migration/vmstate.h" #include "qemu/module.h" #include "hw/qdev-properties.h" -typedef struct { - SSISlave parent_obj; - - qemu_irq interrupt; - /* Values of inputs at system reset (settable by QOM property) */ - uint8_t reset_input[8]; - - uint8_t tb1, rb2, rb3; - int cycle; - - uint8_t input[8]; - int inputs, com; -} MAX111xState; - -#define TYPE_MAX_111X "max111x" - -#define MAX_111X(obj) \ - OBJECT_CHECK(MAX111xState, (obj), TYPE_MAX_111X) - -#define TYPE_MAX_1110 "max1110" -#define TYPE_MAX_1111 "max1111" - /* Control-byte bitfields */ #define CB_PD0 (1 << 0) #define CB_PD1 (1 << 1) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/gpio/max7310.c F: hw/gpio/zaurus.c F: hw/misc/mst_fpga.c F: hw/misc/max111x.c +F: include/hw/misc/max111x.h F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h F: include/hw/display/tc6393xb.h -- 2.20.1 Currently we have a free-floating set of IRQs and a function spitz_out_switch() which handle some miscellaneous GPIO lines for the spitz board. Encapsulate this behaviour in a simple QOM device. At this point we can finally remove the 'max1111' global, because the ADC battery-temperature value is now handled by the misc-gpio device writing the value to its outbound "adc-temp" GPIO, which the board code wires up to the appropriate inbound GPIO line on the max1111. This commit also fixes Coverity issue CID 1421913 (which pointed out that the 'outsignals' in spitz_scoop_gpio_setup() were leaked), because it removes the use of the qemu_allocate_irqs() API from this code entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-13-peter.maydell@linaro.org --- hw/arm/spitz.c | 129 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 87 insertions(+), 42 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { DeviceState *max1111; DeviceState *scp0; DeviceState *scp1; + DeviceState *misc_gpio; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) #define SPITZ_GPIO_MAX1111_CS 20 #define SPITZ_GPIO_TP_INT 11 -static DeviceState *max1111; - /* "Demux" the signal based on current chipselect */ typedef struct { SSISlave ssidev; @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) #define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ #define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ -static void spitz_adc_temp_on(void *opaque, int line, int level) -{ - int batt_temp; - - if (!max1111) - return; - - batt_temp = level ? SPITZ_BATTERY_TEMP : 0; - - qemu_set_irq(qdev_get_gpio_in(max1111, MAX1111_BATT_TEMP), batt_temp); -} - static void corgi_ssp_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) bus = qdev_get_child_bus(sms->mux, "ssi2"); sms->max1111 = qdev_new(TYPE_MAX_1111); - max1111 = sms->max1111; qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, SPITZ_BATTERY_VOLT); qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0); @@ -XXX,XX +XXX,XX @@ static void spitz_akita_i2c_setup(PXA2xxState *cpu) /* Other peripherals */ -static void spitz_out_switch(void *opaque, int line, int level) +/* + * Encapsulation of some miscellaneous GPIO line behaviour for the Spitz boards. + * + * QEMU interface: + * + named GPIO inputs "green-led", "orange-led", "charging", "discharging": + * these currently just print messages that the line has been signalled + * + named GPIO input "adc-temp-on": set to cause the battery-temperature + * value to be passed to the max111x ADC + * + named GPIO output "adc-temp": the ADC value, to be wired up to the max111x + */ +#define TYPE_SPITZ_MISC_GPIO "spitz-misc-gpio" +#define SPITZ_MISC_GPIO(obj) \ + OBJECT_CHECK(SpitzMiscGPIOState, (obj), TYPE_SPITZ_MISC_GPIO) + +typedef struct SpitzMiscGPIOState { + SysBusDevice parent_obj; + + qemu_irq adc_value; +} SpitzMiscGPIOState; + +static void spitz_misc_charging(void *opaque, int n, int level) { - switch (line) { - case 0: - zaurus_printf("Charging %s.\n", level ? "off" : "on"); - break; - case 1: - zaurus_printf("Discharging %s.\n", level ? "on" : "off"); - break; - case 2: - zaurus_printf("Green LED %s.\n", level ? "on" : "off"); - break; - case 3: - zaurus_printf("Orange LED %s.\n", level ? "on" : "off"); - break; - case 6: - spitz_adc_temp_on(opaque, line, level); - break; - default: - g_assert_not_reached(); - } + zaurus_printf("Charging %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_discharging(void *opaque, int n, int level) +{ + zaurus_printf("Discharging %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_green_led(void *opaque, int n, int level) +{ + zaurus_printf("Green LED %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_orange_led(void *opaque, int n, int level) +{ + zaurus_printf("Orange LED %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_adc_temp(void *opaque, int n, int level) +{ + SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(opaque); + int batt_temp = level ? SPITZ_BATTERY_TEMP : 0; + + qemu_set_irq(s->adc_value, batt_temp); +} + +static void spitz_misc_gpio_init(Object *obj) +{ + SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(obj); + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, spitz_misc_charging, "charging", 1); + qdev_init_gpio_in_named(dev, spitz_misc_discharging, "discharging", 1); + qdev_init_gpio_in_named(dev, spitz_misc_green_led, "green-led", 1); + qdev_init_gpio_in_named(dev, spitz_misc_orange_led, "orange-led", 1); + qdev_init_gpio_in_named(dev, spitz_misc_adc_temp, "adc-temp-on", 1); + + qdev_init_gpio_out_named(dev, &s->adc_value, "adc-temp", 1); } #define SPITZ_SCP_LED_GREEN 1 @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) static void spitz_scoop_gpio_setup(SpitzMachineState *sms) { - qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, sms->mpu, 8); + DeviceState *miscdev = sysbus_create_simple(TYPE_SPITZ_MISC_GPIO, -1, NULL); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, outsignals[1]); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); + sms->misc_gpio = miscdev; + + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, + qdev_get_gpio_in_named(miscdev, "charging", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, + qdev_get_gpio_in_named(miscdev, "discharging", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, + qdev_get_gpio_in_named(miscdev, "green-led", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, + qdev_get_gpio_in_named(miscdev, "orange-led", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, + qdev_get_gpio_in_named(miscdev, "adc-temp-on", 0)); + qdev_connect_gpio_out_named(miscdev, "adc-temp", 0, + qdev_get_gpio_in(sms->max1111, MAX1111_BATT_TEMP)); if (sms->scp1) { qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, @@ -XXX,XX +XXX,XX @@ static void spitz_scoop_gpio_setup(SpitzMachineState *sms) qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0)); } - - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); } #define SPITZ_GPIO_HSYNC 22 @@ -XXX,XX +XXX,XX @@ static const TypeInfo spitz_lcdtg_info = { .class_init = spitz_lcdtg_class_init, }; +static const TypeInfo spitz_misc_gpio_info = { + .name = TYPE_SPITZ_MISC_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(SpitzMiscGPIOState), + .instance_init = spitz_misc_gpio_init, + /* + * No class_init required: device has no internal state so does not + * need to set up reset or vmstate, and does not have a realize method. + */ +}; + static void spitz_register_types(void) { type_register_static(&corgi_ssp_info); type_register_static(&spitz_lcdtg_info); type_register_static(&spitz_keyboard_info); type_register_static(&sl_nand_info); + type_register_static(&spitz_misc_gpio_info); } type_init(spitz_register_types) -- 2.20.1 Instead of logging guest accesses to invalid register offsets in this device using zaurus_printf() (which just prints to stderr), use the usual qemu_log_mask(LOG_GUEST_ERROR,...). Since this was the only use of the zaurus_printf() macro outside spitz.c, we can move the definition of that macro from sharpsl.h to spitz.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-14-peter.maydell@linaro.org --- include/hw/arm/sharpsl.h | 3 --- hw/arm/spitz.c | 3 +++ hw/gpio/zaurus.c | 12 +++++++----- 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/sharpsl.h b/include/hw/arm/sharpsl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/sharpsl.h +++ b/include/hw/arm/sharpsl.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" -#define zaurus_printf(format, ...) \ - fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) - /* zaurus.c */ #define SL_PXA_PARAM_BASE 0xa0000a00 diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { #define SPITZ_MACHINE_CLASS(klass) \ OBJECT_CLASS_CHECK(SpitzMachineClass, klass, TYPE_SPITZ_MACHINE) +#define zaurus_printf(format, ...) \ + fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) + #undef REG_FMT #define REG_FMT "0x%02lx" diff --git a/hw/gpio/zaurus.c b/hw/gpio/zaurus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/zaurus.c +++ b/hw/gpio/zaurus.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/module.h" - -#undef REG_FMT -#define REG_FMT "0x%02lx" +#include "qemu/log.h" /* SCOOP devices */ @@ -XXX,XX +XXX,XX @@ static uint64_t scoop_read(void *opaque, hwaddr addr, case SCOOP_GPRR: return s->gpio_level; default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "scoop_read: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } return 0; @@ -XXX,XX +XXX,XX @@ static void scoop_write(void *opaque, hwaddr addr, scoop_gpio_handler_update(s); break; default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "scoop_write: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } } -- 2.20.1 Instead of logging guest accesses to invalid register offsets in the Spitz flash device with zaurus_printf() (which just prints to stderr), use the usual qemu_log_mask(LOG_GUEST_ERROR,...). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-15-peter.maydell@linaro.org --- hw/arm/spitz.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "hw/ssi/ssi.h" #include "hw/block/flash.h" #include "qemu/timer.h" +#include "qemu/log.h" #include "hw/arm/sharpsl.h" #include "ui/console.h" #include "hw/audio/wm8750.h" @@ -XXX,XX +XXX,XX @@ typedef struct { #define zaurus_printf(format, ...) \ fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) -#undef REG_FMT -#define REG_FMT "0x%02lx" - /* Spitz Flash */ #define FLASH_BASE 0x0c000000 #define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ @@ -XXX,XX +XXX,XX @@ static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) return ecc_digest(&s->ecc, nand_getio(s->nand)); default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "sl_read: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } return 0; } @@ -XXX,XX +XXX,XX @@ static void sl_write(void *opaque, hwaddr addr, break; default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "sl_write: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } } -- 2.20.1 Instead of using printf() for logging guest accesses to invalid register offsets in the pxa2xx PIC device, use the usual qemu_log_mask(LOG_GUEST_ERROR,...). This was the only user of the REG_FMT macro in pxa.h, so we can remove that. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-16-peter.maydell@linaro.org --- include/hw/arm/pxa.h | 1 - hw/arm/pxa2xx_pic.c | 9 +++++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { }; # define PA_FMT "0x%08lx" -# define REG_FMT "0x" TARGET_FMT_plx PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, const char *revision); diff --git a/hw/arm/pxa2xx_pic.c b/hw/arm/pxa2xx_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_pic.c +++ b/hw/arm/pxa2xx_pic.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "qemu/module.h" +#include "qemu/log.h" #include "cpu.h" #include "hw/arm/pxa.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_pic_mem_read(void *opaque, hwaddr offset, case ICHP: /* Highest Priority register */ return pxa2xx_pic_highest(s); default: - printf("%s: Bad register offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "pxa2xx_pic_mem_read: bad register offset 0x%" HWADDR_PRIx + "\n", offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void pxa2xx_pic_mem_write(void *opaque, hwaddr offset, s->priority[32 + ((offset - IPR32) >> 2)] = value & 0x8000003f; break; default: - printf("%s: Bad register offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "pxa2xx_pic_mem_write: bad register offset 0x%" + HWADDR_PRIx "\n", offset); return; } pxa2xx_pic_update(opaque); -- 2.20.1 The QOM types "spitz-lcdtg" and "corgi-ssp" are missing the usual QOM TYPE and casting macros; provide and use them. In particular, we can safely use the QOM cast macros instead of FROM_SSI_SLAVE() because in both cases the 'ssidev' field of the instance state struct is the first field in it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-17-peter.maydell@linaro.org --- hw/arm/spitz.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_realize(DeviceState *dev, Error **errp) #define LCDTG_PICTRL 0x06 #define LCDTG_POLCTRL 0x07 +#define TYPE_SPITZ_LCDTG "spitz-lcdtg" +#define SPITZ_LCDTG(obj) OBJECT_CHECK(SpitzLCDTG, (obj), TYPE_SPITZ_LCDTG) + typedef struct { SSISlave ssidev; uint32_t bl_intensity; @@ -XXX,XX +XXX,XX @@ static inline void spitz_bl_power(void *opaque, int line, int level) static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) { - SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); + SpitzLCDTG *s = SPITZ_LCDTG(dev); int addr; addr = value >> 5; value &= 0x1f; @@ -XXX,XX +XXX,XX @@ static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) { - SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, ssi); + SpitzLCDTG *s = SPITZ_LCDTG(ssi); DeviceState *dev = DEVICE(s); s->bl_power = 0; @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) #define SPITZ_GPIO_MAX1111_CS 20 #define SPITZ_GPIO_TP_INT 11 +#define TYPE_CORGI_SSP "corgi-ssp" +#define CORGI_SSP(obj) OBJECT_CHECK(CorgiSSPState, (obj), TYPE_CORGI_SSP) + /* "Demux" the signal based on current chipselect */ typedef struct { SSISlave ssidev; @@ -XXX,XX +XXX,XX @@ typedef struct { static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value) { - CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev); + CorgiSSPState *s = CORGI_SSP(dev); int i; for (i = 0; i < 3; i++) { @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) static void corgi_ssp_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); - CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, d); + CorgiSSPState *s = CORGI_SSP(d); qdev_init_gpio_in(dev, corgi_ssp_gpio_cs, 3); s->bus[0] = ssi_create_bus(dev, "ssi0"); @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) { void *bus; - sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); + sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], + TYPE_CORGI_SSP); bus = qdev_get_child_bus(sms->mux, "ssi0"); - sms->lcdtg = ssi_create_slave(bus, "spitz-lcdtg"); + sms->lcdtg = ssi_create_slave(bus, TYPE_SPITZ_LCDTG); bus = qdev_get_child_bus(sms->mux, "ssi1"); sms->ads7846 = ssi_create_slave(bus, "ads7846"); @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_class_init(ObjectClass *klass, void *data) } static const TypeInfo corgi_ssp_info = { - .name = "corgi-ssp", + .name = TYPE_CORGI_SSP, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(CorgiSSPState), .class_init = corgi_ssp_class_init, @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_class_init(ObjectClass *klass, void *data) } static const TypeInfo spitz_lcdtg_info = { - .name = "spitz-lcdtg", + .name = TYPE_SPITZ_LCDTG, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(SpitzLCDTG), .class_init = spitz_lcdtg_class_init, -- 2.20.1 The FROM_SSI_SLAVE() macro predates QOM and is used as a typesafe way to cast from an SSISlave* to the instance struct of a subtype of TYPE_SSI_SLAVE. Switch to using the QOM cast macros instead, which have the same effect (by writing the QOM macros if the types were previously missing them.) (The FROM_SSI_SLAVE() macro allows the SSISlave member of the subtype's struct to be anywhere as long as it is named "ssidev", whereas a QOM cast macro insists that it is the first thing in the subtype's struct. This is true for all the types we convert here.) This removes all the uses of FROM_SSI_SLAVE() so we can delete the definition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-18-peter.maydell@linaro.org --- include/hw/ssi/ssi.h | 2 -- hw/arm/z2.c | 11 +++++++---- hw/display/ads7846.c | 9 ++++++--- hw/display/ssd0323.c | 10 +++++++--- hw/sd/ssi-sd.c | 4 ++-- 5 files changed, 22 insertions(+), 14 deletions(-) diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/ssi.h +++ b/include/hw/ssi/ssi.h @@ -XXX,XX +XXX,XX @@ struct SSISlave { bool cs; }; -#define FROM_SSI_SLAVE(type, dev) DO_UPCAST(type, ssidev, dev) - extern const VMStateDescription vmstate_ssi_slave; #define VMSTATE_SSI_SLAVE(_field, _state) { \ diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ typedef struct { int pos; } ZipitLCD; +#define TYPE_ZIPIT_LCD "zipit-lcd" +#define ZIPIT_LCD(obj) OBJECT_CHECK(ZipitLCD, (obj), TYPE_ZIPIT_LCD) + static uint32_t zipit_lcd_transfer(SSISlave *dev, uint32_t value) { - ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev); + ZipitLCD *z = ZIPIT_LCD(dev); uint16_t val; if (z->selected) { z->buf[z->pos] = value & 0xff; @@ -XXX,XX +XXX,XX @@ static void z2_lcd_cs(void *opaque, int line, int level) static void zipit_lcd_realize(SSISlave *dev, Error **errp) { - ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev); + ZipitLCD *z = ZIPIT_LCD(dev); z->selected = 0; z->enabled = 0; z->pos = 0; @@ -XXX,XX +XXX,XX @@ static void zipit_lcd_class_init(ObjectClass *klass, void *data) } static const TypeInfo zipit_lcd_info = { - .name = "zipit-lcd", + .name = TYPE_ZIPIT_LCD, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ZipitLCD), .class_init = zipit_lcd_class_init, @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) type_register_static(&zipit_lcd_info); type_register_static(&aer915_info); - z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd"); + z2_lcd = ssi_create_slave(mpu->ssp[1], TYPE_ZIPIT_LCD); bus = pxa2xx_i2c_bus(mpu->i2c[0]); i2c_create_slave(bus, TYPE_AER915, 0x55); wm = i2c_create_slave(bus, TYPE_WM8750, 0x1b); diff --git a/hw/display/ads7846.c b/hw/display/ads7846.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/ads7846.c +++ b/hw/display/ads7846.c @@ -XXX,XX +XXX,XX @@ typedef struct { int output; } ADS7846State; +#define TYPE_ADS7846 "ads7846" +#define ADS7846(obj) OBJECT_CHECK(ADS7846State, (obj), TYPE_ADS7846) + /* Control-byte bitfields */ #define CB_PD0 (1 << 0) #define CB_PD1 (1 << 1) @@ -XXX,XX +XXX,XX @@ static void ads7846_int_update(ADS7846State *s) static uint32_t ads7846_transfer(SSISlave *dev, uint32_t value) { - ADS7846State *s = FROM_SSI_SLAVE(ADS7846State, dev); + ADS7846State *s = ADS7846(dev); switch (s->cycle ++) { case 0: @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_ads7846 = { static void ads7846_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); - ADS7846State *s = FROM_SSI_SLAVE(ADS7846State, d); + ADS7846State *s = ADS7846(d); qdev_init_gpio_out(dev, &s->interrupt, 1); @@ -XXX,XX +XXX,XX @@ static void ads7846_class_init(ObjectClass *klass, void *data) } static const TypeInfo ads7846_info = { - .name = "ads7846", + .name = TYPE_ADS7846, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ADS7846State), .class_init = ads7846_class_init, diff --git a/hw/display/ssd0323.c b/hw/display/ssd0323.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/ssd0323.c +++ b/hw/display/ssd0323.c @@ -XXX,XX +XXX,XX @@ typedef struct { uint8_t framebuffer[128 * 80 / 2]; } ssd0323_state; +#define TYPE_SSD0323 "ssd0323" +#define SSD0323(obj) OBJECT_CHECK(ssd0323_state, (obj), TYPE_SSD0323) + + static uint32_t ssd0323_transfer(SSISlave *dev, uint32_t data) { - ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, dev); + ssd0323_state *s = SSD0323(dev); switch (s->mode) { case SSD0323_DATA: @@ -XXX,XX +XXX,XX @@ static const GraphicHwOps ssd0323_ops = { static void ssd0323_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); - ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, d); + ssd0323_state *s = SSD0323(d); s->col_end = 63; s->row_end = 79; @@ -XXX,XX +XXX,XX @@ static void ssd0323_class_init(ObjectClass *klass, void *data) } static const TypeInfo ssd0323_info = { - .name = "ssd0323", + .name = TYPE_SSD0323, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ssd0323_state), .class_init = ssd0323_class_init, diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/ssi-sd.c +++ b/hw/sd/ssi-sd.c @@ -XXX,XX +XXX,XX @@ typedef struct { static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) { - ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev); + ssi_sd_state *s = SSI_SD(dev); /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */ if (s->mode == SSI_SD_DATA_READ && val == 0x4d) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_ssi_sd = { static void ssi_sd_realize(SSISlave *d, Error **errp) { - ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, d); + ssi_sd_state *s = SSI_SD(d); DeviceState *carddev; DriveInfo *dinfo; Error *err = NULL; -- 2.20.1 Deprecate our TileGX target support: * we have no active maintainer for it * it has had essentially no contributions (other than tree-wide cleanups and similar) since it was first added * the Linux kernel dropped support in 2018, as has glibc Note the deprecation in the manual, but don't try to print a warning when QEMU runs -- printing unsuppressable messages is more obtrusive for linux-user mode than it would be for system-emulation mode, and it doesn't seem worth trying to invent a new suppressible-error system for linux-user just for this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20200619154831.26319-1-peter.maydell@linaro.org --- docs/system/deprecated.rst | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -XXX,XX +XXX,XX @@ The above, converted to the current supported format:: json:{"file.driver":"rbd", "file.pool":"rbd", "file.image":"name"} +linux-user mode CPUs +-------------------- + +``tilegx`` CPUs (since 5.1.0) +''''''''''''''''''''''''''''' + +The ``tilegx`` guest CPU support (which was only implemented in +linux-user mode) is deprecated and will be removed in a future version +of QEMU. Support for this CPU was removed from the upstream Linux +kernel in 2018, and has also been dropped from glibc. + Related binaries ---------------- -- 2.20.1