The following changes since commit 621da7789083b80d6f1ff1c0fb499334007b4f51:

  Update version for v7.1.0 release (2022-08-30 09:40:11 -0700)

are available in the Git repository at:

  https://github.com/hdeller/qemu-hppa.git tags/publish1-pull-request

for you to fetch changes up to 192cac33ab6449202d0b44c4d664020b09ce9266:

  linux-user: Add parameters of getrandom() syscall for strace (2022-09-11 19:58:07 +0200)

----------------------------------------------------------------
linux-user: Add more syscalls, enhance tracing & logging enhancements

- show missing signals in strace output
- add pidfd_open(), pidfd_send_signal(), pidfd_getfd() and close_range()
  syscalls
- add and enhance strace output for clock_gettime64(), chmod(),
  clock_nanosleep(), futex() and getrandom() syscalls
- show failing executable in EXCP_DUMP()
- increase TASK_UNMAPPED_BASE and dump IIR on register dump (on hppa
  target)

----------------------------------------------------------------

Helge Deller (12):
  linux-user: Add missing signals in strace output
  linux-user: Add missing clock_gettime64() syscall strace
  linux-user: Add pidfd_open(), pidfd_send_signal() and pidfd_getfd()
    syscalls
  linux-user: Log failing executable in EXCP_DUMP()
  linux-user/hppa: Use EXCP_DUMP() to show enhanced debug info
  linux-user/hppa: Dump IIR on register dump
  linux-user: Fix strace of chmod() if mode == 0
  linux-user/hppa: Set TASK_UNMAPPED_BASE to 0xfa000000 for hppa arch
  linux-user: Add strace for clock_nanosleep()
  linux-user: Show timespec on strace for futex()
  linux-user: Add close_range() syscall
  linux-user: Add parameters of getrandom() syscall for strace

 linux-user/cpu_loop-common.h |   2 +
 linux-user/hppa/cpu_loop.c   |   6 +-
 linux-user/mmap.c            |   4 +
 linux-user/signal-common.h   |  46 ++++++++++++
 linux-user/signal.c          |  37 +--------
 linux-user/strace.c          | 142 ++++++++++++++++++++++++++++++-----
 linux-user/strace.list       |  21 +++++-
 linux-user/syscall.c         |  46 ++++++++++++
 target/hppa/helper.c         |   6 +-
 9 files changed, 251 insertions(+), 59 deletions(-)

--
2.37.2

The close_range(2) man page says:
close_range() first appeared in Linux 5.9.  Library support was added
in glibc in version 2.34.

The qemu-user GitLab CI jobs are failing. For example, see
https://gitlab.com/qemu-project/qemu/-/jobs/3043629417:

../linux-user/syscall.c:8734:26: error: implicit declaration of
function 'close_range' is invalid in C99
[-Werror,-Wimplicit-function-declaration]
return get_errno(close_range(arg1, arg2, arg3));
                           ^

There is a second issue with this pull request:
../linux-user/syscall.c:357:16: error: ‘pidfd_getfd’ defined but not
used [-Werror=unused-function]
357 | _syscall3(int, pidfd_getfd, int, pidfd, int, targetfd, unsigned
int, flags);
       | ^~~~~~~~~~~
../linux-user/syscall.c:251:13: note: in definition of macro ‘_syscall3’

See https://gitlab.com/qemu-project/qemu/-/jobs/3043629434.

Stefan

On 17/9/22 16:26, Stefan Hajnoczi wrote:
> The close_range(2) man page says:
> close_range() first appeared in Linux 5.9.  Library support was added
> in glibc in version 2.34.
> 
> The qemu-user GitLab CI jobs are failing. For example, see
> https://gitlab.com/qemu-project/qemu/-/jobs/3043629417:
> 
> ../linux-user/syscall.c:8734:26: error: implicit declaration of
> function 'close_range' is invalid in C99
> [-Werror,-Wimplicit-function-declaration]
> return get_errno(close_range(arg1, arg2, arg3));
>                             ^
> 
> There is a second issue with this pull request:
> ../linux-user/syscall.c:357:16: error: ‘pidfd_getfd’ defined but not
> used [-Werror=unused-function]
> 357 | _syscall3(int, pidfd_getfd, int, pidfd, int, targetfd, unsigned
> int, flags);
>         | ^~~~~~~~~~~
> ../linux-user/syscall.c:251:13: note: in definition of macro ‘_syscall3’
> 
> See https://gitlab.com/qemu-project/qemu/-/jobs/3043629434.

Hmm apparently this PR hasn't been reviewed (although the patches were
on the list for 2 weeks).

The 'check DCO' job - looking for S-o-b tags -  is green: 
https://gitlab.com/qemu-project/qemu/-/jobs/3043629425.
Should we complete it by a R-b/A-b check over the commit range?

On Sat, 17 Sept 2022 at 15:31, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> On 17/9/22 16:26, Stefan Hajnoczi wrote:
> > The close_range(2) man page says:
> > close_range() first appeared in Linux 5.9.  Library support was added
> > in glibc in version 2.34.
> >
> > The qemu-user GitLab CI jobs are failing. For example, see
> > https://gitlab.com/qemu-project/qemu/-/jobs/3043629417:
> >
> > ../linux-user/syscall.c:8734:26: error: implicit declaration of
> > function 'close_range' is invalid in C99
> > [-Werror,-Wimplicit-function-declaration]
> > return get_errno(close_range(arg1, arg2, arg3));
> >                             ^
> >
> > There is a second issue with this pull request:
> > ../linux-user/syscall.c:357:16: error: ‘pidfd_getfd’ defined but not
> > used [-Werror=unused-function]
> > 357 | _syscall3(int, pidfd_getfd, int, pidfd, int, targetfd, unsigned
> > int, flags);
> >         | ^~~~~~~~~~~
> > ../linux-user/syscall.c:251:13: note: in definition of macro ‘_syscall3’
> >
> > See https://gitlab.com/qemu-project/qemu/-/jobs/3043629434.
>
> Hmm apparently this PR hasn't been reviewed (although the patches were
> on the list for 2 weeks).
>
> The 'check DCO' job - looking for S-o-b tags -  is green:
> https://gitlab.com/qemu-project/qemu/-/jobs/3043629425.
> Should we complete it by a R-b/A-b check over the commit range?

In some areas there will be no R-b/A-b, so I don't think we can
require those checks.

Was this pull request supposed to go through Laurent instead of being
applied directly by me?

Stefan

On 9/17/22 22:11, Stefan Hajnoczi wrote:
> On Sat, 17 Sept 2022 at 15:31, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>>
>> On 17/9/22 16:26, Stefan Hajnoczi wrote:
>>> The close_range(2) man page says:
>>> close_range() first appeared in Linux 5.9.  Library support was added
>>> in glibc in version 2.34.
>>>
>>> The qemu-user GitLab CI jobs are failing. For example, see
>>> https://gitlab.com/qemu-project/qemu/-/jobs/3043629417:
>>>
>>> ../linux-user/syscall.c:8734:26: error: implicit declaration of
>>> function 'close_range' is invalid in C99
>>> [-Werror,-Wimplicit-function-declaration]
>>> return get_errno(close_range(arg1, arg2, arg3));
>>>                              ^
>>>
>>> There is a second issue with this pull request:
>>> ../linux-user/syscall.c:357:16: error: ‘pidfd_getfd’ defined but not
>>> used [-Werror=unused-function]
>>> 357 | _syscall3(int, pidfd_getfd, int, pidfd, int, targetfd, unsigned
>>> int, flags);
>>>          | ^~~~~~~~~~~
>>> ../linux-user/syscall.c:251:13: note: in definition of macro ‘_syscall3’
>>>
>>> See https://gitlab.com/qemu-project/qemu/-/jobs/3043629434.

Stefan, Thanks for testing those patches!
I'll send a new series with those issues fixed soon.


>> Hmm apparently this PR hasn't been reviewed (although the patches were
>> on the list for 2 weeks).
>>
>> The 'check DCO' job - looking for S-o-b tags -  is green:
>> https://gitlab.com/qemu-project/qemu/-/jobs/3043629425.
>> Should we complete it by a R-b/A-b check over the commit range?
>
> In some areas there will be no R-b/A-b, so I don't think we can
> require those checks.
>
> Was this pull request supposed to go through Laurent instead of being
> applied directly by me?

I'm fine with either way :-)

Thanks!
Helge

Btw, I have a whole bunch of additional patches on top of this
series so it would be good to get this series in first...