This patch adds the EBB exception support that are triggered by
Performance Monitor alerts. This happens when a Performance Monitor
alert occurs and MMCR0_EBE, BESCR_PME and BESCR_GE are set.
fire_PMC_interrupt() will execute a new ebb_perfm_excp() helper that
will check for MMCR0_EBE, BESCR_PME and BESCR_GE bits. If all bits are
set, do_ebb() will attempt to trigger a PERFM EBB event.
If the EBB facility is enabled in both FSCR and HFSCR we consider that
the EBB is valid and set BESCR_PMEO. After that, if we're running in
problem state, fire a POWERPC_EXCP_PERM_EBB immediately. Otherwise we'll
queue a PPC_INTERRUPT_EBB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
target/ppc/excp_helper.c | 48 ++++++++++++++++++++++++++++++++++++++++
target/ppc/helper.h | 1 +
target/ppc/power8-pmu.c | 3 +--
3 files changed, 50 insertions(+), 2 deletions(-)
diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 5e7d29ae00..89b7b3ac00 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -2066,6 +2066,54 @@ void helper_rfebb(CPUPPCState *env, target_ulong s)
env->spr[SPR_BESCR] &= ~BESCR_GE;
}
}
+
+/*
+ * Triggers or queues an 'ebb_excp' EBB exception. All checks
+ * but FSCR, HFSCR and msr_pr must be done beforehand.
+ *
+ * PowerISA v3.1 isn't clear about whether an EBB should be
+ * postponed or cancelled if the EBB facility is unavailable.
+ * Our assumption here is that the EBB is cancelled if both
+ * FSCR and HFSCR EBB facilities aren't available.
+ */
+static void do_ebb(CPUPPCState *env, int ebb_excp)
+{
+ PowerPCCPU *cpu = env_archcpu(env);
+ CPUState *cs = CPU(cpu);
+
+ /*
+ * FSCR_EBB and FSCR_IC_EBB are the same bits used with
+ * HFSCR.
+ */
+ helper_fscr_facility_check(env, FSCR_EBB, 0, FSCR_IC_EBB);
+ helper_hfscr_facility_check(env, FSCR_EBB, "EBB", FSCR_IC_EBB);
+
+ if (ebb_excp == POWERPC_EXCP_PERFM_EBB) {
+ env->spr[SPR_BESCR] |= BESCR_PMEO;
+ } else if (ebb_excp == POWERPC_EXCP_EXTERNAL_EBB) {
+ env->spr[SPR_BESCR] |= BESCR_EEO;
+ }
+
+ if (msr_pr == 1) {
+ powerpc_excp(cpu, ebb_excp);
+ } else {
+ env->pending_interrupts |= 1 << PPC_INTERRUPT_EBB;
+ cpu_interrupt(cs, CPU_INTERRUPT_HARD);
+ }
+}
+
+void helper_ebb_perfm_excp(CPUPPCState *env)
+{
+ bool perfm_ebb_enabled = env->spr[SPR_POWER_MMCR0] & MMCR0_EBE &&
+ env->spr[SPR_BESCR] & BESCR_PME &&
+ env->spr[SPR_BESCR] & BESCR_GE;
+
+ if (!perfm_ebb_enabled) {
+ return;
+ }
+
+ do_ebb(env, POWERPC_EXCP_PERFM_EBB);
+}
#endif
/*****************************************************************************/
diff --git a/target/ppc/helper.h b/target/ppc/helper.h
index ab008c9d4e..8c2c03fd48 100644
--- a/target/ppc/helper.h
+++ b/target/ppc/helper.h
@@ -18,6 +18,7 @@ DEF_HELPER_1(rfid, void, env)
DEF_HELPER_1(rfscv, void, env)
DEF_HELPER_1(hrfid, void, env)
DEF_HELPER_2(rfebb, void, env, tl)
+DEF_HELPER_1(ebb_perfm_excp, void, env)
DEF_HELPER_2(store_lpcr, void, env, tl)
DEF_HELPER_2(store_pcr, void, env, tl)
DEF_HELPER_2(store_mmcr0, void, env, tl)
diff --git a/target/ppc/power8-pmu.c b/target/ppc/power8-pmu.c
index d245663158..38e1ecb782 100644
--- a/target/ppc/power8-pmu.c
+++ b/target/ppc/power8-pmu.c
@@ -307,8 +307,7 @@ static void fire_PMC_interrupt(PowerPCCPU *cpu)
env->spr[SPR_POWER_MMCR0] |= MMCR0_PMAO;
}
- /* PMC interrupt not implemented yet */
- return;
+ helper_ebb_perfm_excp(env);
}
/* This helper assumes that the PMC is running. */
--
2.35.1