1. Patchew
  2. QEMU
  3. [PATCH 0/8] q800: GLUE updates for A/UX mode
  4. View patch

[PATCH 5/8] q800: wire up auxmode GPIO to GLUE

Mark Cave-Ayland posted 8 patches 4 years, 4 months ago
Maintainers: Laurent Vivier <laurent@vivier.eu>
There is a newer version of this series
[PATCH 5/8] q800: wire up auxmode GPIO to GLUE
Posted by Mark Cave-Ayland 4 years, 4 months ago 
This enables the GLUE logic to change its CPU level IRQ routing depending upon
whether the hardware has been configured for A/UX mode.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/m68k/q800.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
index 81c335bf16..0093872d89 100644
--- a/hw/m68k/q800.c
+++ b/hw/m68k/q800.c
@@ -100,6 +100,7 @@ struct GLUEState {
     SysBusDevice parent_obj;
     M68kCPU *cpu;
     uint8_t ipr;
+    uint8_t auxmode;
 };
 
 #define GLUE_IRQ_IN_VIA1       0
@@ -145,11 +146,19 @@ static void GLUE_set_irq(void *opaque, int irq, int level)
     m68k_set_irq_level(s->cpu, 0, 0);
 }
 
+static void glue_auxmode_set_irq(void *opaque, int irq, int level)
+{
+    GLUEState *s = GLUE(opaque);
+
+    s->auxmode = level;
+}
+
 static void glue_reset(DeviceState *dev)
 {
     GLUEState *s = GLUE(dev);
 
     s->ipr = 0;
+    s->auxmode = 0;
 }
 
 static const VMStateDescription vmstate_glue = {
@@ -158,6 +167,7 @@ static const VMStateDescription vmstate_glue = {
     .minimum_version_id = 0,
     .fields = (VMStateField[]) {
         VMSTATE_UINT8(ipr, GLUEState),
+        VMSTATE_UINT8(auxmode, GLUEState),
         VMSTATE_END_OF_LIST(),
     },
 };
@@ -178,6 +188,7 @@ static void glue_init(Object *obj)
     DeviceState *dev = DEVICE(obj);
 
     qdev_init_gpio_in(dev, GLUE_set_irq, 8);
+    qdev_init_gpio_in_named(dev, glue_auxmode_set_irq, "auxmode", 1);
 }
 
 static void glue_class_init(ObjectClass *klass, void *data)
@@ -308,6 +319,9 @@ static void q800_init(MachineState *machine)
     sysbus_realize_and_unref(sysbus, &error_fatal);
     sysbus_mmio_map(sysbus, 1, VIA_BASE);
     sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, GLUE_IRQ_IN_VIA1));
+    /* A/UX mode */
+    qdev_connect_gpio_out(via1_dev, 0,
+                          qdev_get_gpio_in_named(glue, "auxmode", 0));
 
     adb_bus = qdev_get_child_bus(via1_dev, "adb.0");
     dev = qdev_new(TYPE_ADB_KEYBOARD);
-- 
2.20.1
Re: [PATCH 5/8] q800: wire up auxmode GPIO to GLUE
Posted by Laurent Vivier 4 years, 3 months ago 
Le 13/10/2021 à 23:21, Mark Cave-Ayland a écrit :
> This enables the GLUE logic to change its CPU level IRQ routing depending upon
> whether the hardware has been configured for A/UX mode.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/m68k/q800.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
> index 81c335bf16..0093872d89 100644
> --- a/hw/m68k/q800.c
> +++ b/hw/m68k/q800.c
> @@ -100,6 +100,7 @@ struct GLUEState {
>      SysBusDevice parent_obj;
>      M68kCPU *cpu;
>      uint8_t ipr;
> +    uint8_t auxmode;
>  };
>  
>  #define GLUE_IRQ_IN_VIA1       0
> @@ -145,11 +146,19 @@ static void GLUE_set_irq(void *opaque, int irq, int level)
>      m68k_set_irq_level(s->cpu, 0, 0);
>  }
>  
> +static void glue_auxmode_set_irq(void *opaque, int irq, int level)
> +{
> +    GLUEState *s = GLUE(opaque);
> +
> +    s->auxmode = level;
> +}
> +
>  static void glue_reset(DeviceState *dev)
>  {
>      GLUEState *s = GLUE(dev);
>  
>      s->ipr = 0;
> +    s->auxmode = 0;
>  }
>  
>  static const VMStateDescription vmstate_glue = {
> @@ -158,6 +167,7 @@ static const VMStateDescription vmstate_glue = {
>      .minimum_version_id = 0,
>      .fields = (VMStateField[]) {
>          VMSTATE_UINT8(ipr, GLUEState),
> +        VMSTATE_UINT8(auxmode, GLUEState),
>          VMSTATE_END_OF_LIST(),
>      },
>  };
> @@ -178,6 +188,7 @@ static void glue_init(Object *obj)
>      DeviceState *dev = DEVICE(obj);
>  
>      qdev_init_gpio_in(dev, GLUE_set_irq, 8);
> +    qdev_init_gpio_in_named(dev, glue_auxmode_set_irq, "auxmode", 1);
>  }
>  
>  static void glue_class_init(ObjectClass *klass, void *data)
> @@ -308,6 +319,9 @@ static void q800_init(MachineState *machine)
>      sysbus_realize_and_unref(sysbus, &error_fatal);
>      sysbus_mmio_map(sysbus, 1, VIA_BASE);
>      sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, GLUE_IRQ_IN_VIA1));
> +    /* A/UX mode */
> +    qdev_connect_gpio_out(via1_dev, 0,
> +                          qdev_get_gpio_in_named(glue, "auxmode", 0));
>  
>      adb_bus = qdev_get_child_bus(via1_dev, "adb.0");
>      dev = qdev_new(TYPE_ADB_KEYBOARD);
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Re: [PATCH 5/8] q800: wire up auxmode GPIO to GLUE
Posted by Laurent Vivier 4 years, 3 months ago 
Le 13/10/2021 à 23:21, Mark Cave-Ayland a écrit :
> This enables the GLUE logic to change its CPU level IRQ routing depending upon
> whether the hardware has been configured for A/UX mode.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/m68k/q800.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
> index 81c335bf16..0093872d89 100644
> --- a/hw/m68k/q800.c
> +++ b/hw/m68k/q800.c
> @@ -100,6 +100,7 @@ struct GLUEState {
>      SysBusDevice parent_obj;
>      M68kCPU *cpu;
>      uint8_t ipr;
> +    uint8_t auxmode;
>  };
>  
>  #define GLUE_IRQ_IN_VIA1       0
> @@ -145,11 +146,19 @@ static void GLUE_set_irq(void *opaque, int irq, int level)
>      m68k_set_irq_level(s->cpu, 0, 0);
>  }
>  
> +static void glue_auxmode_set_irq(void *opaque, int irq, int level)
> +{
> +    GLUEState *s = GLUE(opaque);
> +
> +    s->auxmode = level;
> +}
> +
>  static void glue_reset(DeviceState *dev)
>  {
>      GLUEState *s = GLUE(dev);
>  
>      s->ipr = 0;
> +    s->auxmode = 0;
>  }
>  
>  static const VMStateDescription vmstate_glue = {
> @@ -158,6 +167,7 @@ static const VMStateDescription vmstate_glue = {
>      .minimum_version_id = 0,
>      .fields = (VMStateField[]) {
>          VMSTATE_UINT8(ipr, GLUEState),
> +        VMSTATE_UINT8(auxmode, GLUEState),
>          VMSTATE_END_OF_LIST(),
>      },
>  };
> @@ -178,6 +188,7 @@ static void glue_init(Object *obj)
>      DeviceState *dev = DEVICE(obj);
>  
>      qdev_init_gpio_in(dev, GLUE_set_irq, 8);
> +    qdev_init_gpio_in_named(dev, glue_auxmode_set_irq, "auxmode", 1);
>  }
>  
>  static void glue_class_init(ObjectClass *klass, void *data)
> @@ -308,6 +319,9 @@ static void q800_init(MachineState *machine)
>      sysbus_realize_and_unref(sysbus, &error_fatal);
>      sysbus_mmio_map(sysbus, 1, VIA_BASE);
>      sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, GLUE_IRQ_IN_VIA1));
> +    /* A/UX mode */
> +    qdev_connect_gpio_out(via1_dev, 0,
> +                          qdev_get_gpio_in_named(glue, "auxmode", 0));
>  
>      adb_bus = qdev_get_child_bus(via1_dev, "adb.0");
>      dev = qdev_new(TYPE_ADB_KEYBOARD);
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.