During sbsa acs level 3 testing,it is seen that the GIC
maintenance interrupts are not triggered and the related test
cases failed.On debugging the cause,found that the value of
MISR register (from maintenance_interrupt_state()) was being
passed to qemu_set_irq() as level.Updated logic to set level
to 1 if any of the maintenance interrupt attributes are set.
Confirmed that the GIC maintanence interrupts are triggered and
sbsa acs test cases passed with this change.

Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
---
 hw/intc/arm_gicv3_cpuif.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index 462a35f66e..34691d4fe2 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -418,7 +418,9 @@ static void gicv3_cpuif_virt_update(GICv3CPUState *cs)
     }
 
     if (cs->ich_hcr_el2 & ICH_HCR_EL2_EN) {
-        maintlevel = maintenance_interrupt_state(cs);
+        if (maintenance_interrupt_state(cs)) {
+            maintlevel = 1;
+        }
     }
 
     trace_gicv3_cpuif_virt_set_irqs(gicv3_redist_affid(cs), fiqlevel,
-- 
2.27.0

On 9/15/21 10:58 PM, Shashi Mallela wrote:
> During sbsa acs level 3 testing,it is seen that the GIC
> maintenance interrupts are not triggered and the related test
> cases failed.On debugging the cause,found that the value of
> MISR register (from maintenance_interrupt_state()) was being
> passed to qemu_set_irq() as level.Updated logic to set level
> to 1 if any of the maintenance interrupt attributes are set.
> Confirmed that the GIC maintanence interrupts are triggered and
> sbsa acs test cases passed with this change.
> 

Fixes: c5fc89b36c0 ("hw/intc/arm_gicv3: Implement
gicv3_cpuif_virt_update()")

> Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
> ---
>  hw/intc/arm_gicv3_cpuif.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
> index 462a35f66e..34691d4fe2 100644
> --- a/hw/intc/arm_gicv3_cpuif.c
> +++ b/hw/intc/arm_gicv3_cpuif.c
> @@ -418,7 +418,9 @@ static void gicv3_cpuif_virt_update(GICv3CPUState *cs)
>      }
>  
>      if (cs->ich_hcr_el2 & ICH_HCR_EL2_EN) {
> -        maintlevel = maintenance_interrupt_state(cs);
> +        if (maintenance_interrupt_state(cs)) {
> +            maintlevel = 1;
> +        }

Or:
           maintlevel = !!maintenance_interrupt_state(cs);

But your style is more explicit.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

On Thu, 16 Sept 2021 at 05:36, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> On 9/15/21 10:58 PM, Shashi Mallela wrote:
> > During sbsa acs level 3 testing,it is seen that the GIC
> > maintenance interrupts are not triggered and the related test
> > cases failed.On debugging the cause,found that the value of
> > MISR register (from maintenance_interrupt_state()) was being
> > passed to qemu_set_irq() as level.Updated logic to set level
> > to 1 if any of the maintenance interrupt attributes are set.
> > Confirmed that the GIC maintanence interrupts are triggered and
> > sbsa acs test cases passed with this change.
> >
>
> Fixes: c5fc89b36c0 ("hw/intc/arm_gicv3: Implement
> gicv3_cpuif_virt_update()")
>
> > Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
> > ---
> >  hw/intc/arm_gicv3_cpuif.c | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
> > index 462a35f66e..34691d4fe2 100644
> > --- a/hw/intc/arm_gicv3_cpuif.c
> > +++ b/hw/intc/arm_gicv3_cpuif.c
> > @@ -418,7 +418,9 @@ static void gicv3_cpuif_virt_update(GICv3CPUState *cs)
> >      }
> >
> >      if (cs->ich_hcr_el2 & ICH_HCR_EL2_EN) {
> > -        maintlevel = maintenance_interrupt_state(cs);
> > +        if (maintenance_interrupt_state(cs)) {
> > +            maintlevel = 1;
> > +        }
>
> Or:
>            maintlevel = !!maintenance_interrupt_state(cs);
>
> But your style is more explicit.

Applied to target-arm.next, thanks.

I opted to tweak the code to

+    if ((cs->ich_hcr_el2 & ICH_HCR_EL2_EN) &&
+        maintenance_interrupt_state(cs) != 0) {
+        maintlevel = 1;
     }

to avoid the nested if()s.

-- PMM