More accumulated patches from during the freeze... The following changes since commit c83fcfaf8a54d0d034bd0edf7bbb3b0d16669be9: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-08-26' into staging (2021-08-26 13:42:34 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210826 for you to fetch changes up to d2e6f370138a7f32bc28b20dcd55374b7a638f39: hw/arm/xlnx-zynqmp: Add unimplemented APU mmio (2021-08-26 17:02:01 +0100) ---------------------------------------------------------------- target-arm queue: * hw/dma/xlnx-zdma, xlnx_csu_dma: Require 'dma' link property to be set * hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly * target/arm/cpu: Introduce sve_vq_supported bitmap * docs/specs: Convert ACPI spec docs to rST * arch_init: Clean up and refactoring * hw/core/loader: In gunzip(), check index is in range before use, not after * softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd() * softmmu/physmem.c: Check return value from realpath() * Zero-initialize sockaddr_in structs * raspi: Use error_fatal for SoC realize errors, not error_abort * target/arm: Avoid assertion trying to use KVM and multiple ASes * target/arm: Implement HSTR.TTEE * target/arm: Implement HSTR.TJDBX * target/arm: Do hflags rebuild in cpsr_write() * hw/arm/xlnx-versal, xlnx-zynqmp: Add unimplemented APU mmio ---------------------------------------------------------------- Andrew Jones (4): target/arm/cpu: Introduce sve_vq_supported bitmap target/arm/kvm64: Ensure sve vls map is completely clear target/arm/cpu64: Replace kvm_supported with sve_vq_supported target/arm/cpu64: Validate sve vector lengths are supported Ani Sinha (1): hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly Peter Maydell (26): docs/specs/acpu_cpu_hotplug: Convert to rST docs/specs/acpi_mem_hotplug: Convert to rST docs/specs/acpi_pci_hotplug: Convert to rST docs/specs/acpi_nvdimm: Convert to rST MAINTAINERS: Add ACPI specs documents to ACPI and NVDIMM sections softmmu: Use accel_find("xen") instead of xen_available() monitor: Use accel_find("kvm") instead of kvm_available() softmmu/arch_init.c: Trim down include list meson.build: Define QEMU_ARCH in config-target.h arch_init.h: Add QEMU_ARCH_HEXAGON arch_init.h: Move QEMU_ARCH_VIRTIO_* to qdev-monitor.c arch_init.h: Don't include arch_init.h unnecessarily stubs: Remove unused arch_type.c stub hw/core/loader: In gunzip(), check index is in range before use, not after softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd() softmmu/physmem.c: Check return value from realpath() net: Zero sockaddr_in in parse_host_port() gdbstub: Zero-initialize sockaddr structs tests/qtest/ipmi-bt-test: Zero-initialize sockaddr struct tests/tcg/multiarch/linux-test: Zero-initialize sockaddr structs raspi: Use error_fatal for SoC realize errors, not error_abort target/arm: Avoid assertion trying to use KVM and multiple ASes hw/arm/virt: Delete EL3 error checksnow provided in CPU realize target/arm: Implement HSTR.TTEE target/arm: Implement HSTR.TJDBX target/arm: Do hflags rebuild in cpsr_write() Philippe Mathieu-Daudé (4): hw/arm/xlnx-zynqmp: Realize qspi controller *after* qspi_dma hw/dma/xlnx_csu_dma: Run trivial checks early in realize() hw/dma/xlnx_csu_dma: Always expect 'dma' link property to be set hw/dma/xlnx-zdma Always expect 'dma' link property to be set Tong Ho (2): hw/arm/xlnx-versal: Add unimplemented APU mmio hw/arm/xlnx-zynqmp: Add unimplemented APU mmio docs/specs/acpi_cpu_hotplug.rst | 235 +++++++++++++++++++++ docs/specs/acpi_cpu_hotplug.txt | 160 -------------- docs/specs/acpi_mem_hotplug.rst | 128 +++++++++++ docs/specs/acpi_mem_hotplug.txt | 94 --------- docs/specs/acpi_nvdimm.rst | 228 ++++++++++++++++++++ docs/specs/acpi_nvdimm.txt | 188 ----------------- .../{acpi_pci_hotplug.txt => acpi_pci_hotplug.rst} | 37 ++-- docs/specs/index.rst | 4 + meson.build | 2 + include/hw/arm/xlnx-versal.h | 2 + include/hw/arm/xlnx-zynqmp.h | 7 + include/hw/dma/xlnx-zdma.h | 2 +- include/hw/dma/xlnx_csu_dma.h | 2 +- include/sysemu/arch_init.h | 15 +- target/arm/cpu.h | 17 +- target/arm/helper.h | 2 + target/arm/syndrome.h | 7 + blockdev.c | 1 - gdbstub.c | 4 +- hw/arm/raspi.c | 2 +- hw/arm/virt.c | 5 - hw/arm/xlnx-versal.c | 4 + hw/arm/xlnx-zynqmp.c | 86 ++++++-- hw/core/loader.c | 35 ++- hw/dma/xlnx-zdma.c | 24 +-- hw/dma/xlnx_csu_dma.c | 31 ++- hw/i386/pc.c | 1 - hw/i386/pc_piix.c | 1 - hw/i386/pc_q35.c | 1 - hw/mips/jazz.c | 1 - hw/mips/malta.c | 1 - hw/ppc/prep.c | 1 - hw/riscv/sifive_e.c | 1 - hw/riscv/sifive_u.c | 1 - hw/riscv/spike.c | 1 - hw/riscv/virt.c | 1 - linux-user/arm/signal.c | 2 - monitor/qmp-cmds.c | 3 +- net/net.c | 2 + softmmu/arch_init.c | 66 ------ softmmu/physmem.c | 5 +- softmmu/qdev-monitor.c | 9 + softmmu/vl.c | 6 +- stubs/arch_type.c | 4 - target/arm/cpu.c | 23 ++ target/arm/cpu64.c | 118 +++++------ target/arm/helper.c | 40 +++- target/arm/kvm64.c | 2 +- target/arm/op_helper.c | 16 ++ target/arm/translate.c | 12 ++ target/ppc/cpu_init.c | 1 - target/s390x/cpu-sysemu.c | 1 - tests/qtest/ipmi-bt-test.c | 2 +- tests/tcg/multiarch/linux-test.c | 4 +- MAINTAINERS | 5 + hw/arm/Kconfig | 2 - stubs/meson.build | 1 - 57 files changed, 949 insertions(+), 707 deletions(-) create mode 100644 docs/specs/acpi_cpu_hotplug.rst delete mode 100644 docs/specs/acpi_cpu_hotplug.txt create mode 100644 docs/specs/acpi_mem_hotplug.rst delete mode 100644 docs/specs/acpi_mem_hotplug.txt create mode 100644 docs/specs/acpi_nvdimm.rst delete mode 100644 docs/specs/acpi_nvdimm.txt rename docs/specs/{acpi_pci_hotplug.txt => acpi_pci_hotplug.rst} (51%) delete mode 100644 stubs/arch_type.c From: Philippe Mathieu-Daudé <philmd@redhat.com> If we link QOM object (a) as a property of QOM object (b), we must set the property *before* (b) is realized. Move QSPI realization *after* QSPI DMA. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210819163422.2863447-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zynqmp.c | 42 ++++++++++++++++++++---------------------- 1 file changed, 20 insertions(+), 22 deletions(-) diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) g_free(bus_name); } - if (!sysbus_realize(SYS_BUS_DEVICE(&s->qspi), errp)) { - return; - } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 0, QSPI_ADDR); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 1, LQSPI_ADDR); - sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, gic_spi[QSPI_IRQ]); - - for (i = 0; i < XLNX_ZYNQMP_NUM_QSPI_BUS; i++) { - gchar *bus_name; - gchar *target_bus; - - /* Alias controller SPI bus to the SoC itself */ - bus_name = g_strdup_printf("qspi%d", i); - target_bus = g_strdup_printf("spi%d", i); - object_property_add_alias(OBJECT(s), bus_name, - OBJECT(&s->qspi), target_bus); - g_free(bus_name); - g_free(target_bus); - } - if (!sysbus_realize(SYS_BUS_DEVICE(&s->dp), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi_dma), 0, QSPI_DMA_ADDR); sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0, gic_spi[QSPI_IRQ]); - object_property_set_link(OBJECT(&s->qspi), "stream-connected-dma", - OBJECT(&s->qspi_dma), errp); + + if (!object_property_set_link(OBJECT(&s->qspi), "stream-connected-dma", + OBJECT(&s->qspi_dma), errp)) { + return; + } + if (!sysbus_realize(SYS_BUS_DEVICE(&s->qspi), errp)) { + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 0, QSPI_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 1, LQSPI_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, gic_spi[QSPI_IRQ]); + + for (i = 0; i < XLNX_ZYNQMP_NUM_QSPI_BUS; i++) { + g_autofree gchar *bus_name = g_strdup_printf("qspi%d", i); + g_autofree gchar *target_bus = g_strdup_printf("spi%d", i); + + /* Alias controller SPI bus to the SoC itself */ + object_property_add_alias(OBJECT(s), bus_name, + OBJECT(&s->qspi), target_bus); + } } static Property xlnx_zynqmp_props[] = { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> If some property are not set, we'll return indicating a failure, so it is pointless to allocate / initialize some fields too early. Move the trivial checks earlier in realize(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210819163422.2863447-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/xlnx_csu_dma.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/hw/dma/xlnx_csu_dma.c b/hw/dma/xlnx_csu_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/xlnx_csu_dma.c +++ b/hw/dma/xlnx_csu_dma.c @@ -XXX,XX +XXX,XX @@ static void xlnx_csu_dma_realize(DeviceState *dev, Error **errp) XlnxCSUDMA *s = XLNX_CSU_DMA(dev); RegisterInfoArray *reg_array; + if (!s->is_dst && !s->tx_dev) { + error_setg(errp, "zynqmp.csu-dma: Stream not connected"); + return; + } + reg_array = register_init_block32(dev, xlnx_csu_dma_regs_info[!!s->is_dst], XLNX_CSU_DMA_R_MAX, @@ -XXX,XX +XXX,XX @@ static void xlnx_csu_dma_realize(DeviceState *dev, Error **errp) sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); - if (!s->is_dst && !s->tx_dev) { - error_setg(errp, "zynqmp.csu-dma: Stream not connected"); - return; - } - s->src_timer = ptimer_init(xlnx_csu_dma_src_timeout_hit, s, PTIMER_POLICY_DEFAULT); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Simplify by always passing a MemoryRegion property to the device. Doing so we can move the AddressSpace field to the device struct, removing need for heap allocation. Update the Xilinx ZynqMP SoC model to pass the default system memory instead of a NULL value. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210819163422.2863447-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/dma/xlnx_csu_dma.h | 2 +- hw/arm/xlnx-zynqmp.c | 4 ++++ hw/dma/xlnx_csu_dma.c | 21 ++++++++++----------- 3 files changed, 15 insertions(+), 12 deletions(-) diff --git a/include/hw/dma/xlnx_csu_dma.h b/include/hw/dma/xlnx_csu_dma.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/dma/xlnx_csu_dma.h +++ b/include/hw/dma/xlnx_csu_dma.h @@ -XXX,XX +XXX,XX @@ typedef struct XlnxCSUDMA { MemoryRegion iomem; MemTxAttrs attr; MemoryRegion *dma_mr; - AddressSpace *dma_as; + AddressSpace dma_as; qemu_irq irq; StreamSink *tx_dev; /* Used as generic StreamSink */ ptimer_state *src_timer; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) gic_spi[adma_ch_intr[i]]); } + if (!object_property_set_link(OBJECT(&s->qspi_dma), "dma", + OBJECT(system_memory), errp)) { + return; + } if (!sysbus_realize(SYS_BUS_DEVICE(&s->qspi_dma), errp)) { return; } diff --git a/hw/dma/xlnx_csu_dma.c b/hw/dma/xlnx_csu_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/xlnx_csu_dma.c +++ b/hw/dma/xlnx_csu_dma.c @@ -XXX,XX +XXX,XX @@ static uint32_t xlnx_csu_dma_read(XlnxCSUDMA *s, uint8_t *buf, uint32_t len) for (i = 0; i < len && (result == MEMTX_OK); i += s->width) { uint32_t mlen = MIN(len - i, s->width); - result = address_space_rw(s->dma_as, addr, s->attr, + result = address_space_rw(&s->dma_as, addr, s->attr, buf + i, mlen, false); } } else { - result = address_space_rw(s->dma_as, addr, s->attr, buf, len, false); + result = address_space_rw(&s->dma_as, addr, s->attr, buf, len, false); } if (result == MEMTX_OK) { @@ -XXX,XX +XXX,XX @@ static uint32_t xlnx_csu_dma_write(XlnxCSUDMA *s, uint8_t *buf, uint32_t len) for (i = 0; i < len && (result == MEMTX_OK); i += s->width) { uint32_t mlen = MIN(len - i, s->width); - result = address_space_rw(s->dma_as, addr, s->attr, + result = address_space_rw(&s->dma_as, addr, s->attr, buf, mlen, true); buf += mlen; } } else { - result = address_space_rw(s->dma_as, addr, s->attr, buf, len, true); + result = address_space_rw(&s->dma_as, addr, s->attr, buf, len, true); } if (result != MEMTX_OK) { @@ -XXX,XX +XXX,XX @@ static void xlnx_csu_dma_realize(DeviceState *dev, Error **errp) return; } + if (!s->dma_mr) { + error_setg(errp, TYPE_XLNX_CSU_DMA " 'dma' link not set"); + return; + } + address_space_init(&s->dma_as, s->dma_mr, "csu-dma"); + reg_array = register_init_block32(dev, xlnx_csu_dma_regs_info[!!s->is_dst], XLNX_CSU_DMA_R_MAX, @@ -XXX,XX +XXX,XX @@ static void xlnx_csu_dma_realize(DeviceState *dev, Error **errp) s->src_timer = ptimer_init(xlnx_csu_dma_src_timeout_hit, s, PTIMER_POLICY_DEFAULT); - if (s->dma_mr) { - s->dma_as = g_malloc0(sizeof(AddressSpace)); - address_space_init(s->dma_as, s->dma_mr, NULL); - } else { - s->dma_as = &address_space_memory; - } - s->attr = MEMTXATTRS_UNSPECIFIED; s->r_size_last_word = 0; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Simplify by always passing a MemoryRegion property to the device. Doing so we can move the AddressSpace field to the device struct, removing need for heap allocation. Update the Xilinx ZynqMP / Versal SoC models to pass the default system memory instead of a NULL value. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210819163422.2863447-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/dma/xlnx-zdma.h | 2 +- hw/arm/xlnx-versal.c | 2 ++ hw/arm/xlnx-zynqmp.c | 8 ++++++++ hw/dma/xlnx-zdma.c | 24 ++++++++++++------------ 4 files changed, 23 insertions(+), 13 deletions(-) diff --git a/include/hw/dma/xlnx-zdma.h b/include/hw/dma/xlnx-zdma.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/dma/xlnx-zdma.h +++ b/include/hw/dma/xlnx-zdma.h @@ -XXX,XX +XXX,XX @@ struct XlnxZDMA { MemoryRegion iomem; MemTxAttrs attr; MemoryRegion *dma_mr; - AddressSpace *dma_as; + AddressSpace dma_as; qemu_irq irq_zdma_ch_imr; struct { diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_admas(Versal *s, qemu_irq *pic) TYPE_XLNX_ZDMA); dev = DEVICE(&s->lpd.iou.adma[i]); object_property_set_int(OBJECT(dev), "bus-width", 128, &error_abort); + object_property_set_link(OBJECT(dev), "dma", + OBJECT(get_system_memory()), &error_fatal); sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) errp)) { return; } + if (!object_property_set_link(OBJECT(&s->gdma[i]), "dma", + OBJECT(system_memory), errp)) { + return; + } if (!sysbus_realize(SYS_BUS_DEVICE(&s->gdma[i]), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) } for (i = 0; i < XLNX_ZYNQMP_NUM_ADMA_CH; i++) { + if (!object_property_set_link(OBJECT(&s->adma[i]), "dma", + OBJECT(system_memory), errp)) { + return; + } if (!sysbus_realize(SYS_BUS_DEVICE(&s->adma[i]), errp)) { return; } diff --git a/hw/dma/xlnx-zdma.c b/hw/dma/xlnx-zdma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/xlnx-zdma.c +++ b/hw/dma/xlnx-zdma.c @@ -XXX,XX +XXX,XX @@ static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr, return false; } - descr->addr = address_space_ldq_le(s->dma_as, addr, s->attr, NULL); - descr->size = address_space_ldl_le(s->dma_as, addr + 8, s->attr, NULL); - descr->attr = address_space_ldl_le(s->dma_as, addr + 12, s->attr, NULL); + descr->addr = address_space_ldq_le(&s->dma_as, addr, s->attr, NULL); + descr->size = address_space_ldl_le(&s->dma_as, addr + 8, s->attr, NULL); + descr->attr = address_space_ldl_le(&s->dma_as, addr + 12, s->attr, NULL); return true; } @@ -XXX,XX +XXX,XX @@ static void zdma_update_descr_addr(XlnxZDMA *s, bool type, } else { addr = zdma_get_regaddr64(s, basereg); addr += sizeof(s->dsc_dst); - next = address_space_ldq_le(s->dma_as, addr, s->attr, NULL); + next = address_space_ldq_le(&s->dma_as, addr, s->attr, NULL); } zdma_put_regaddr64(s, basereg, next); @@ -XXX,XX +XXX,XX @@ static void zdma_write_dst(XlnxZDMA *s, uint8_t *buf, uint32_t len) } } - address_space_write(s->dma_as, s->dsc_dst.addr, s->attr, buf, dlen); + address_space_write(&s->dma_as, s->dsc_dst.addr, s->attr, buf, dlen); if (burst_type == AXI_BURST_INCR) { s->dsc_dst.addr += dlen; } @@ -XXX,XX +XXX,XX @@ static void zdma_process_descr(XlnxZDMA *s) len = s->cfg.bus_width / 8; } } else { - address_space_read(s->dma_as, src_addr, s->attr, s->buf, len); + address_space_read(&s->dma_as, src_addr, s->attr, s->buf, len); if (burst_type == AXI_BURST_INCR) { src_addr += len; } @@ -XXX,XX +XXX,XX @@ static void zdma_realize(DeviceState *dev, Error **errp) XlnxZDMA *s = XLNX_ZDMA(dev); unsigned int i; + if (!s->dma_mr) { + error_setg(errp, TYPE_XLNX_ZDMA " 'dma' link not set"); + return; + } + address_space_init(&s->dma_as, s->dma_mr, "zdma-dma"); + for (i = 0; i < ARRAY_SIZE(zdma_regs_info); ++i) { RegisterInfo *r = &s->regs_info[zdma_regs_info[i].addr / 4]; @@ -XXX,XX +XXX,XX @@ static void zdma_realize(DeviceState *dev, Error **errp) }; } - if (s->dma_mr) { - s->dma_as = g_malloc0(sizeof(AddressSpace)); - address_space_init(s->dma_as, s->dma_mr, NULL); - } else { - s->dma_as = &address_space_memory; - } s->attr = MEMTXATTRS_UNSPECIFIED; } -- 2.20.1 From: Ani Sinha <ani@anisinha.ca> Since commit 36b79e3219d ("hw/acpi/Kconfig: Add missing Kconfig dependencies (build error)"), ACPI_MEMORY_HOTPLUG and ACPI_NVDIMM is implicitly turned on when ACPI_HW_REDUCED is selected. ACPI_HW_REDUCED is already enabled. No need to turn on ACPI_MEMORY_HOTPLUG or ACPI_NVDIMM explicitly. This is a minor cleanup. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210819162637.518507-1-ani@anisinha.ca Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select ACPI_PCI select MEM_DEVICE select DIMM - select ACPI_MEMORY_HOTPLUG select ACPI_HW_REDUCED - select ACPI_NVDIMM select ACPI_APEI config CHEETAH -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Allow CPUs that support SVE to specify which SVE vector lengths they support by setting them in this bitmap. Currently only the 'max' and 'host' CPU types supports SVE and 'host' requires KVM which obtains its supported bitmap from the host. So, we only need to initialize the bitmap for 'max' with TCG. And, since 'max' should support all SVE vector lengths we simply fill the bitmap. Future CPU types may have less trivial maps though. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210823160647.34028-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 4 ++++ target/arm/cpu64.c | 2 ++ 2 files changed, 6 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { * While processing properties during initialization, corresponding * sve_vq_init bits are set for bits in sve_vq_map that have been * set by properties. + * + * Bits set in sve_vq_supported represent valid vector lengths for + * the CPU type. */ DECLARE_BITMAP(sve_vq_map, ARM_MAX_VQ); DECLARE_BITMAP(sve_vq_init, ARM_MAX_VQ); + DECLARE_BITMAP(sve_vq_supported, ARM_MAX_VQ); /* Generic timer counter frequency, in Hz */ uint64_t gt_cntfrq_hz; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) /* Default to PAUTH on, with the architected algorithm. */ qdev_property_add_static(DEVICE(obj), &arm_cpu_pauth_property); qdev_property_add_static(DEVICE(obj), &arm_cpu_pauth_impdef_property); + + bitmap_fill(cpu->sve_vq_supported, ARM_MAX_VQ); } aarch64_add_sve_properties(obj); -- 2.20.1 From: Andrew Jones <drjones@redhat.com> bitmap_clear() only clears the given range. While the given range should be sufficient in this case we might as well be 100% sure all bits are zeroed by using bitmap_zero(). Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210823160647.34028-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ void kvm_arm_sve_get_vls(CPUState *cs, unsigned long *map) uint32_t vq = 0; int i, j; - bitmap_clear(map, 0, ARM_MAX_VQ); + bitmap_zero(map, ARM_MAX_VQ); /* * KVM ensures all host CPUs support the same set of vector lengths. -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Now that we have an ARMCPU member sve_vq_supported we no longer need the local kvm_supported bitmap for KVM's supported vector lengths. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210823160647.34028-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) * any of the above. Finally, if SVE is not disabled, then at least one * vector length must be enabled. */ - DECLARE_BITMAP(kvm_supported, ARM_MAX_VQ); DECLARE_BITMAP(tmp, ARM_MAX_VQ); uint32_t vq, max_vq = 0; - /* Collect the set of vector lengths supported by KVM. */ - bitmap_zero(kvm_supported, ARM_MAX_VQ); + /* + * CPU models specify a set of supported vector lengths which are + * enabled by default. Attempting to enable any vector length not set + * in the supported bitmap results in an error. When KVM is enabled we + * fetch the supported bitmap from the host. + */ if (kvm_enabled() && kvm_arm_sve_supported()) { - kvm_arm_sve_get_vls(CPU(cpu), kvm_supported); + kvm_arm_sve_get_vls(CPU(cpu), cpu->sve_vq_supported); } else if (kvm_enabled()) { assert(!cpu_isar_feature(aa64_sve, cpu)); } @@ -XXX,XX +XXX,XX @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) * For KVM we have to automatically enable all supported unitialized * lengths, even when the smaller lengths are not all powers-of-two. */ - bitmap_andnot(tmp, kvm_supported, cpu->sve_vq_init, max_vq); + bitmap_andnot(tmp, cpu->sve_vq_supported, cpu->sve_vq_init, max_vq); bitmap_or(cpu->sve_vq_map, cpu->sve_vq_map, tmp, max_vq); } else { /* Propagate enabled bits down through required powers-of-two. */ @@ -XXX,XX +XXX,XX @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) /* Disabling a supported length disables all larger lengths. */ for (vq = 1; vq <= ARM_MAX_VQ; ++vq) { if (test_bit(vq - 1, cpu->sve_vq_init) && - test_bit(vq - 1, kvm_supported)) { + test_bit(vq - 1, cpu->sve_vq_supported)) { break; } } max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ; - bitmap_andnot(cpu->sve_vq_map, kvm_supported, + bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported, cpu->sve_vq_init, max_vq); if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) { error_setg(errp, "cannot disable sve%d", vq * 128); @@ -XXX,XX +XXX,XX @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) if (kvm_enabled()) { /* Ensure the set of lengths matches what KVM supports. */ - bitmap_xor(tmp, cpu->sve_vq_map, kvm_supported, max_vq); + bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq); if (!bitmap_empty(tmp, max_vq)) { vq = find_last_bit(tmp, max_vq) + 1; if (test_bit(vq - 1, cpu->sve_vq_map)) { -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Future CPU types may specify which vector lengths are supported. We can apply nearly the same logic to validate those lengths as we do for KVM's supported vector lengths. We merge the code where we can, but unfortunately can't completely merge it because KVM requires all vector lengths, power-of-two or not, smaller than the maximum enabled length to also be enabled. The architecture only requires all the power-of-two lengths, though, so TCG will only enforce that. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210823160647.34028-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 101 ++++++++++++++++++++------------------------- 1 file changed, 45 insertions(+), 56 deletions(-) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) break; } } - max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ; - bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported, - cpu->sve_vq_init, max_vq); - if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) { - error_setg(errp, "cannot disable sve%d", vq * 128); - error_append_hint(errp, "Disabling sve%d results in all " - "vector lengths being disabled.\n", - vq * 128); - error_append_hint(errp, "With SVE enabled, at least one " - "vector length must be enabled.\n"); - return; - } } else { /* Disabling a power-of-two disables all larger lengths. */ - if (test_bit(0, cpu->sve_vq_init)) { - error_setg(errp, "cannot disable sve128"); - error_append_hint(errp, "Disabling sve128 results in all " - "vector lengths being disabled.\n"); - error_append_hint(errp, "With SVE enabled, at least one " - "vector length must be enabled.\n"); - return; - } - for (vq = 2; vq <= ARM_MAX_VQ; vq <<= 1) { + for (vq = 1; vq <= ARM_MAX_VQ; vq <<= 1) { if (test_bit(vq - 1, cpu->sve_vq_init)) { break; } } - max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ; - bitmap_complement(cpu->sve_vq_map, cpu->sve_vq_init, max_vq); + } + + max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ; + bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported, + cpu->sve_vq_init, max_vq); + if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) { + error_setg(errp, "cannot disable sve%d", vq * 128); + error_append_hint(errp, "Disabling sve%d results in all " + "vector lengths being disabled.\n", + vq * 128); + error_append_hint(errp, "With SVE enabled, at least one " + "vector length must be enabled.\n"); + return; } max_vq = find_last_bit(cpu->sve_vq_map, max_vq) + 1; @@ -XXX,XX +XXX,XX @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) assert(max_vq != 0); bitmap_clear(cpu->sve_vq_map, max_vq, ARM_MAX_VQ - max_vq); - if (kvm_enabled()) { - /* Ensure the set of lengths matches what KVM supports. */ - bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq); - if (!bitmap_empty(tmp, max_vq)) { - vq = find_last_bit(tmp, max_vq) + 1; - if (test_bit(vq - 1, cpu->sve_vq_map)) { - if (cpu->sve_max_vq) { - error_setg(errp, "cannot set sve-max-vq=%d", - cpu->sve_max_vq); - error_append_hint(errp, "This KVM host does not support " - "the vector length %d-bits.\n", - vq * 128); - error_append_hint(errp, "It may not be possible to use " - "sve-max-vq with this KVM host. Try " - "using only sve<N> properties.\n"); - } else { - error_setg(errp, "cannot enable sve%d", vq * 128); - error_append_hint(errp, "This KVM host does not support " - "the vector length %d-bits.\n", - vq * 128); - } + /* Ensure the set of lengths matches what is supported. */ + bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq); + if (!bitmap_empty(tmp, max_vq)) { + vq = find_last_bit(tmp, max_vq) + 1; + if (test_bit(vq - 1, cpu->sve_vq_map)) { + if (cpu->sve_max_vq) { + error_setg(errp, "cannot set sve-max-vq=%d", cpu->sve_max_vq); + error_append_hint(errp, "This CPU does not support " + "the vector length %d-bits.\n", vq * 128); + error_append_hint(errp, "It may not be possible to use " + "sve-max-vq with this CPU. Try " + "using only sve<N> properties.\n"); } else { + error_setg(errp, "cannot enable sve%d", vq * 128); + error_append_hint(errp, "This CPU does not support " + "the vector length %d-bits.\n", vq * 128); + } + return; + } else { + if (kvm_enabled()) { error_setg(errp, "cannot disable sve%d", vq * 128); error_append_hint(errp, "The KVM host requires all " "supported vector lengths smaller " "than %d bits to also be enabled.\n", max_vq * 128); - } - return; - } - } else { - /* Ensure all required powers-of-two are enabled. */ - for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) { - if (!test_bit(vq - 1, cpu->sve_vq_map)) { - error_setg(errp, "cannot disable sve%d", vq * 128); - error_append_hint(errp, "sve%d is required as it " - "is a power-of-two length smaller than " - "the maximum, sve%d\n", - vq * 128, max_vq * 128); return; + } else { + /* Ensure all required powers-of-two are enabled. */ + for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) { + if (!test_bit(vq - 1, cpu->sve_vq_map)) { + error_setg(errp, "cannot disable sve%d", vq * 128); + error_append_hint(errp, "sve%d is required as it " + "is a power-of-two length smaller " + "than the maximum, sve%d\n", + vq * 128, max_vq * 128); + return; + } + } } } } -- 2.20.1 Do a basic conversion of the acpi_cpu_hotplug spec document to rST. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20210727170414.3368-2-peter.maydell@linaro.org --- docs/specs/acpi_cpu_hotplug.rst | 235 ++++++++++++++++++++++++++++++++ docs/specs/acpi_cpu_hotplug.txt | 160 ---------------------- docs/specs/index.rst | 1 + 3 files changed, 236 insertions(+), 160 deletions(-) create mode 100644 docs/specs/acpi_cpu_hotplug.rst delete mode 100644 docs/specs/acpi_cpu_hotplug.txt diff --git a/docs/specs/acpi_cpu_hotplug.rst b/docs/specs/acpi_cpu_hotplug.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/specs/acpi_cpu_hotplug.rst @@ -XXX,XX +XXX,XX @@ +QEMU<->ACPI BIOS CPU hotplug interface +====================================== + +QEMU supports CPU hotplug via ACPI. This document +describes the interface between QEMU and the ACPI BIOS. + +ACPI BIOS GPE.2 handler is dedicated for notifying OS about CPU hot-add +and hot-remove events. + + +Legacy ACPI CPU hotplug interface registers +------------------------------------------- + +CPU present bitmap for: + +- ICH9-LPC (IO port 0x0cd8-0xcf7, 1-byte access) +- PIIX-PM (IO port 0xaf00-0xaf1f, 1-byte access) +- One bit per CPU. Bit position reflects corresponding CPU APIC ID. Read-only. +- The first DWORD in bitmap is used in write mode to switch from legacy + to modern CPU hotplug interface, write 0 into it to do switch. + +QEMU sets corresponding CPU bit on hot-add event and issues SCI +with GPE.2 event set. CPU present map is read by ACPI BIOS GPE.2 handler +to notify OS about CPU hot-add events. CPU hot-remove isn't supported. + + +Modern ACPI CPU hotplug interface registers +------------------------------------------- + +Register block base address: + +- ICH9-LPC IO port 0x0cd8 +- PIIX-PM IO port 0xaf00 + +Register block size: + +- ACPI_CPU_HOTPLUG_REG_LEN = 12 + +All accesses to registers described below, imply little-endian byte order. + +Reserved registers behavior: + +- write accesses are ignored +- read accesses return all bits set to 0. + +The last stored value in 'CPU selector' must refer to a possible CPU, otherwise + +- reads from any register return 0 +- writes to any other register are ignored until valid value is stored into it + +On QEMU start, 'CPU selector' is initialized to a valid value, on reset it +keeps the current value. + +Read access behavior +^^^^^^^^^^^^^^^^^^^^ + +offset [0x0-0x3] + Command data 2: (DWORD access) + + If value last stored in 'Command field' is: + + 0: + reads as 0x0 + 3: + upper 32 bits of architecture specific CPU ID value + other values: + reserved + +offset [0x4] + CPU device status fields: (1 byte access) + + bits: + + 0: + Device is enabled and may be used by guest + 1: + Device insert event, used to distinguish device for which + no device check event to OSPM was issued. + It's valid only when bit 0 is set. + 2: + Device remove event, used to distinguish device for which + no device eject request to OSPM was issued. Firmware must + ignore this bit. + 3: + reserved and should be ignored by OSPM + 4: + if set to 1, OSPM requests firmware to perform device eject. + 5-7: + reserved and should be ignored by OSPM + +offset [0x5-0x7] + reserved + +offset [0x8] + Command data: (DWORD access) + + If value last stored in 'Command field' is one of: + + 0: + contains 'CPU selector' value of a CPU with pending event[s] + 3: + lower 32 bits of architecture specific CPU ID value + (in x86 case: APIC ID) + otherwise: + contains 0 + +Write access behavior +^^^^^^^^^^^^^^^^^^^^^ + +offset [0x0-0x3] + CPU selector: (DWORD access) + + Selects active CPU device. All following accesses to other + registers will read/store data from/to selected CPU. + Valid values: [0 .. max_cpus) + +offset [0x4] + CPU device control fields: (1 byte access) + + bits: + + 0: + reserved, OSPM must clear it before writing to register. + 1: + if set to 1 clears device insert event, set by OSPM + after it has emitted device check event for the + selected CPU device + 2: + if set to 1 clears device remove event, set by OSPM + after it has emitted device eject request for the + selected CPU device. + 3: + if set to 1 initiates device eject, set by OSPM when it + triggers CPU device removal and calls _EJ0 method or by firmware + when bit #4 is set. In case bit #4 were set, it's cleared as + part of device eject. + 4: + if set to 1, OSPM hands over device eject to firmware. + Firmware shall issue device eject request as described above + (bit #3) and OSPM should not touch device eject bit (#3) in case + it's asked firmware to perform CPU device eject. + 5-7: + reserved, OSPM must clear them before writing to register + +offset[0x5] + Command field: (1 byte access) + + value: + + 0: + selects a CPU device with inserting/removing events and + following reads from 'Command data' register return + selected CPU ('CPU selector' value). + If no CPU with events found, the current 'CPU selector' doesn't + change and corresponding insert/remove event flags are not modified. + + 1: + following writes to 'Command data' register set OST event + register in QEMU + 2: + following writes to 'Command data' register set OST status + register in QEMU + 3: + following reads from 'Command data' and 'Command data 2' return + architecture specific CPU ID value for currently selected CPU. + other values: + reserved + +offset [0x6-0x7] + reserved + +offset [0x8] + Command data: (DWORD access) + + If last stored 'Command field' value is: + + 1: + stores value into OST event register + 2: + stores value into OST status register, triggers + ACPI_DEVICE_OST QMP event from QEMU to external applications + with current values of OST event and status registers. + other values: + reserved + +Typical usecases +---------------- + +(x86) Detecting and enabling modern CPU hotplug interface +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +QEMU starts with legacy CPU hotplug interface enabled. Detecting and +switching to modern interface is based on the 2 legacy CPU hotplug features: + +#. Writes into CPU bitmap are ignored. +#. CPU bitmap always has bit #0 set, corresponding to boot CPU. + +Use following steps to detect and enable modern CPU hotplug interface: + +#. Store 0x0 to the 'CPU selector' register, attempting to switch to modern mode +#. Store 0x0 to the 'CPU selector' register, to ensure valid selector value +#. Store 0x0 to the 'Command field' register +#. Read the 'Command data 2' register. + If read value is 0x0, the modern interface is enabled. + Otherwise legacy or no CPU hotplug interface available + +Get a cpu with pending event +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +#. Store 0x0 to the 'CPU selector' register. +#. Store 0x0 to the 'Command field' register. +#. Read the 'CPU device status fields' register. +#. If both bit #1 and bit #2 are clear in the value read, there is no CPU + with a pending event and selected CPU remains unchanged. +#. Otherwise, read the 'Command data' register. The value read is the + selector of the CPU with the pending event (which is already selected). + +Enumerate CPUs present/non present CPUs +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +#. Set the present CPU count to 0. +#. Set the iterator to 0. +#. Store 0x0 to the 'CPU selector' register, to ensure that it's in + a valid state and that access to other registers won't be ignored. +#. Store 0x0 to the 'Command field' register to make 'Command data' + register return 'CPU selector' value of selected CPU +#. Read the 'CPU device status fields' register. +#. If bit #0 is set, increment the present CPU count. +#. Increment the iterator. +#. Store the iterator to the 'CPU selector' register. +#. Read the 'Command data' register. +#. If the value read is not zero, goto 05. +#. Otherwise store 0x0 to the 'CPU selector' register, to put it + into a valid state and exit. + The iterator at this point equals "max_cpus". diff --git a/docs/specs/acpi_cpu_hotplug.txt b/docs/specs/acpi_cpu_hotplug.txt deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/specs/acpi_cpu_hotplug.txt +++ /dev/null @@ -XXX,XX +XXX,XX @@ -QEMU<->ACPI BIOS CPU hotplug interface --------------------------------------- - -QEMU supports CPU hotplug via ACPI. This document -describes the interface between QEMU and the ACPI BIOS. - -ACPI BIOS GPE.2 handler is dedicated for notifying OS about CPU hot-add -and hot-remove events. - -============================================ -Legacy ACPI CPU hotplug interface registers: --------------------------------------------- -CPU present bitmap for: - ICH9-LPC (IO port 0x0cd8-0xcf7, 1-byte access) - PIIX-PM (IO port 0xaf00-0xaf1f, 1-byte access) - One bit per CPU. Bit position reflects corresponding CPU APIC ID. Read-only. - The first DWORD in bitmap is used in write mode to switch from legacy - to modern CPU hotplug interface, write 0 into it to do switch. ---------------------------------------------------------------- -QEMU sets corresponding CPU bit on hot-add event and issues SCI -with GPE.2 event set. CPU present map is read by ACPI BIOS GPE.2 handler -to notify OS about CPU hot-add events. CPU hot-remove isn't supported. - -===================================== -Modern ACPI CPU hotplug interface registers: -------------------------------------- -Register block base address: - ICH9-LPC IO port 0x0cd8 - PIIX-PM IO port 0xaf00 -Register block size: - ACPI_CPU_HOTPLUG_REG_LEN = 12 - -All accesses to registers described below, imply little-endian byte order. - -Reserved resisters behavior: - - write accesses are ignored - - read accesses return all bits set to 0. - -The last stored value in 'CPU selector' must refer to a possible CPU, otherwise - - reads from any register return 0 - - writes to any other register are ignored until valid value is stored into it -On QEMU start, 'CPU selector' is initialized to a valid value, on reset it -keeps the current value. - -read access: - offset: - [0x0-0x3] Command data 2: (DWORD access) - if value last stored in 'Command field': - 0: reads as 0x0 - 3: upper 32 bits of architecture specific CPU ID value - other values: reserved - [0x4] CPU device status fields: (1 byte access) - bits: - 0: Device is enabled and may be used by guest - 1: Device insert event, used to distinguish device for which - no device check event to OSPM was issued. - It's valid only when bit 0 is set. - 2: Device remove event, used to distinguish device for which - no device eject request to OSPM was issued. Firmware must - ignore this bit. - 3: reserved and should be ignored by OSPM - 4: if set to 1, OSPM requests firmware to perform device eject. - 5-7: reserved and should be ignored by OSPM - [0x5-0x7] reserved - [0x8] Command data: (DWORD access) - contains 0 unless value last stored in 'Command field' is one of: - 0: contains 'CPU selector' value of a CPU with pending event[s] - 3: lower 32 bits of architecture specific CPU ID value - (in x86 case: APIC ID) - -write access: - offset: - [0x0-0x3] CPU selector: (DWORD access) - selects active CPU device. All following accesses to other - registers will read/store data from/to selected CPU. - Valid values: [0 .. max_cpus) - [0x4] CPU device control fields: (1 byte access) - bits: - 0: reserved, OSPM must clear it before writing to register. - 1: if set to 1 clears device insert event, set by OSPM - after it has emitted device check event for the - selected CPU device - 2: if set to 1 clears device remove event, set by OSPM - after it has emitted device eject request for the - selected CPU device. - 3: if set to 1 initiates device eject, set by OSPM when it - triggers CPU device removal and calls _EJ0 method or by firmware - when bit #4 is set. In case bit #4 were set, it's cleared as - part of device eject. - 4: if set to 1, OSPM hands over device eject to firmware. - Firmware shall issue device eject request as described above - (bit #3) and OSPM should not touch device eject bit (#3) in case - it's asked firmware to perform CPU device eject. - 5-7: reserved, OSPM must clear them before writing to register - [0x5] Command field: (1 byte access) - value: - 0: selects a CPU device with inserting/removing events and - following reads from 'Command data' register return - selected CPU ('CPU selector' value). - If no CPU with events found, the current 'CPU selector' doesn't - change and corresponding insert/remove event flags are not modified. - 1: following writes to 'Command data' register set OST event - register in QEMU - 2: following writes to 'Command data' register set OST status - register in QEMU - 3: following reads from 'Command data' and 'Command data 2' return - architecture specific CPU ID value for currently selected CPU. - other values: reserved - [0x6-0x7] reserved - [0x8] Command data: (DWORD access) - if last stored 'Command field' value: - 1: stores value into OST event register - 2: stores value into OST status register, triggers - ACPI_DEVICE_OST QMP event from QEMU to external applications - with current values of OST event and status registers. - other values: reserved - -Typical usecases: - - (x86) Detecting and enabling modern CPU hotplug interface. - QEMU starts with legacy CPU hotplug interface enabled. Detecting and - switching to modern interface is based on the 2 legacy CPU hotplug features: - 1. Writes into CPU bitmap are ignored. - 2. CPU bitmap always has bit#0 set, corresponding to boot CPU. - - Use following steps to detect and enable modern CPU hotplug interface: - 1. Store 0x0 to the 'CPU selector' register, - attempting to switch to modern mode - 2. Store 0x0 to the 'CPU selector' register, - to ensure valid selector value - 3. Store 0x0 to the 'Command field' register, - 4. Read the 'Command data 2' register. - If read value is 0x0, the modern interface is enabled. - Otherwise legacy or no CPU hotplug interface available - - - Get a cpu with pending event - 1. Store 0x0 to the 'CPU selector' register. - 2. Store 0x0 to the 'Command field' register. - 3. Read the 'CPU device status fields' register. - 4. If both bit#1 and bit#2 are clear in the value read, there is no CPU - with a pending event and selected CPU remains unchanged. - 5. Otherwise, read the 'Command data' register. The value read is the - selector of the CPU with the pending event (which is already - selected). - - - Enumerate CPUs present/non present CPUs - 01. Set the present CPU count to 0. - 02. Set the iterator to 0. - 03. Store 0x0 to the 'CPU selector' register, to ensure that it's in - a valid state and that access to other registers won't be ignored. - 04. Store 0x0 to the 'Command field' register to make 'Command data' - register return 'CPU selector' value of selected CPU - 05. Read the 'CPU device status fields' register. - 06. If bit#0 is set, increment the present CPU count. - 07. Increment the iterator. - 08. Store the iterator to the 'CPU selector' register. - 09. Read the 'Command data' register. - 10. If the value read is not zero, goto 05. - 11. Otherwise store 0x0 to the 'CPU selector' register, to put it - into a valid state and exit. - The iterator at this point equals "max_cpus". diff --git a/docs/specs/index.rst b/docs/specs/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/index.rst +++ b/docs/specs/index.rst @@ -XXX,XX +XXX,XX @@ guest hardware that is specific to QEMU. acpi_hw_reduced_hotplug tpm acpi_hest_ghes + acpi_cpu_hotplug -- 2.20.1 Convert the acpi memory hotplug spec to rST. Note that this includes converting a lot of weird whitespace characters to plain old spaces (the rST parser does not like whatever the old ones were). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20210727170414.3368-3-peter.maydell@linaro.org --- docs/specs/acpi_mem_hotplug.rst | 128 ++++++++++++++++++++++++++++++++ docs/specs/acpi_mem_hotplug.txt | 94 ----------------------- docs/specs/index.rst | 1 + 3 files changed, 129 insertions(+), 94 deletions(-) create mode 100644 docs/specs/acpi_mem_hotplug.rst delete mode 100644 docs/specs/acpi_mem_hotplug.txt diff --git a/docs/specs/acpi_mem_hotplug.rst b/docs/specs/acpi_mem_hotplug.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/specs/acpi_mem_hotplug.rst @@ -XXX,XX +XXX,XX @@ +QEMU<->ACPI BIOS memory hotplug interface +========================================= + +ACPI BIOS GPE.3 handler is dedicated for notifying OS about memory hot-add +and hot-remove events. + +Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access) +---------------------------------------------------------------- + +Read access behavior +^^^^^^^^^^^^^^^^^^^^ + +[0x0-0x3] + Lo part of memory device phys address +[0x4-0x7] + Hi part of memory device phys address +[0x8-0xb] + Lo part of memory device size in bytes +[0xc-0xf] + Hi part of memory device size in bytes +[0x10-0x13] + Memory device proximity domain +[0x14] + Memory device status fields + + bits: + + 0: + Device is enabled and may be used by guest + 1: + Device insert event, used to distinguish device for which + no device check event to OSPM was issued. + It's valid only when bit 1 is set. + 2: + Device remove event, used to distinguish device for which + no device eject request to OSPM was issued. + 3-7: + reserved and should be ignored by OSPM + +[0x15-0x17] + reserved + +Write access behavior +^^^^^^^^^^^^^^^^^^^^^ + + +[0x0-0x3] + Memory device slot selector, selects active memory device. + All following accesses to other registers in 0xa00-0xa17 + region will read/store data from/to selected memory device. +[0x4-0x7] + OST event code reported by OSPM +[0x8-0xb] + OST status code reported by OSPM +[0xc-0x13] + reserved, writes into it are ignored +[0x14] + Memory device control fields + + bits: + + 0: + reserved, OSPM must clear it before writing to register. + Due to BUG in versions prior 2.4 that field isn't cleared + when other fields are written. Keep it reserved and don't + try to reuse it. + 1: + if set to 1 clears device insert event, set by OSPM + after it has emitted device check event for the + selected memory device + 2: + if set to 1 clears device remove event, set by OSPM + after it has emitted device eject request for the + selected memory device + 3: + if set to 1 initiates device eject, set by OSPM when it + triggers memory device removal and calls _EJ0 method + 4-7: + reserved, OSPM must clear them before writing to register + +Selecting memory device slot beyond present range has no effect on platform: + +- write accesses to memory hot-plug registers not documented above are ignored +- read accesses to memory hot-plug registers not documented above return + all bits set to 1. + +Memory hot remove process diagram +--------------------------------- + +:: + + +-------------+ +-----------------------+ +------------------+ + | 1. QEMU | | 2. QEMU | |3. QEMU | + | device_del +---->+ device unplug request +----->+Send SCI to guest,| + | | | cb | |return control to | + | | | | |management | + +-------------+ +-----------------------+ +------------------+ + + +---------------------------------------------------------------------+ + + +---------------------+ +-------------------------+ + | OSPM: | remove event | OSPM: | + | send Eject Request, | | Scan memory devices | + | clear remove event +<-------------+ for event flags | + | | | | + +---------------------+ +-------------------------+ + | + | + +---------v--------+ +-----------------------+ + | Guest OS: | success | OSPM: | + | process Ejection +----------->+ Execute _EJ0 method, | + | request | | set eject bit in flags| + +------------------+ +-----------------------+ + |failure | + v v + +------------------------+ +-----------------------+ + | OSPM: | | QEMU: | + | set OST event & status | | call device unplug cb | + | fields | | | + +------------------------+ +-----------------------+ + | | + v v + +------------------+ +-------------------+ + |QEMU: | |QEMU: | + |Send OST QMP event| |Send device deleted| + | | |QMP event | + +------------------+ | | + +-------------------+ diff --git a/docs/specs/acpi_mem_hotplug.txt b/docs/specs/acpi_mem_hotplug.txt deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/specs/acpi_mem_hotplug.txt +++ /dev/null @@ -XXX,XX +XXX,XX @@ -QEMU<->ACPI BIOS memory hotplug interface --------------------------------------- - -ACPI BIOS GPE.3 handler is dedicated for notifying OS about memory hot-add -and hot-remove events. - -Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access): ---------------------------------------------------------------- -0xa00: - read access: - [0x0-0x3] Lo part of memory device phys address - [0x4-0x7] Hi part of memory device phys address - [0x8-0xb] Lo part of memory device size in bytes - [0xc-0xf] Hi part of memory device size in bytes - [0x10-0x13] Memory device proximity domain - [0x14] Memory device status fields - bits: - 0: Device is enabled and may be used by guest - 1: Device insert event, used to distinguish device for which - no device check event to OSPM was issued. - It's valid only when bit 1 is set. - 2: Device remove event, used to distinguish device for which - no device eject request to OSPM was issued. - 3-7: reserved and should be ignored by OSPM - [0x15-0x17] reserved - - write access: - [0x0-0x3] Memory device slot selector, selects active memory device. - All following accesses to other registers in 0xa00-0xa17 - region will read/store data from/to selected memory device. - [0x4-0x7] OST event code reported by OSPM - [0x8-0xb] OST status code reported by OSPM - [0xc-0x13] reserved, writes into it are ignored - [0x14] Memory device control fields - bits: - 0: reserved, OSPM must clear it before writing to register. - Due to BUG in versions prior 2.4 that field isn't cleared - when other fields are written. Keep it reserved and don't - try to reuse it. - 1: if set to 1 clears device insert event, set by OSPM - after it has emitted device check event for the - selected memory device - 2: if set to 1 clears device remove event, set by OSPM - after it has emitted device eject request for the - selected memory device - 3: if set to 1 initiates device eject, set by OSPM when it - triggers memory device removal and calls _EJ0 method - 4-7: reserved, OSPM must clear them before writing to register - -Selecting memory device slot beyond present range has no effect on platform: - - write accesses to memory hot-plug registers not documented above are - ignored - - read accesses to memory hot-plug registers not documented above return - all bits set to 1. - -Memory hot remove process diagram: ----------------------------------- - +-------------+     +-----------------------+      +------------------+      - |  1. QEMU    |     | 2. QEMU               |      |3. QEMU           |      - |  device_del +---->+ device unplug request +----->+Send SCI to guest,|      - |             |     |         cb            |      |return control to |      - +-------------+     +-----------------------+      |management        |      -                                                    +------------------+      -                                                                              - +---------------------------------------------------------------------+      -                                                                              - +---------------------+              +-------------------------+             - | OSPM:               | remove event | OSPM:                   |             - | send Eject Request, |              | Scan memory devices     |             - | clear remove event  +<-------------+ for event flags         |             - |                     |              |                         |             - +---------------------+              +-------------------------+             -           |                                                                  -           |                                                                  - +---------v--------+            +-----------------------+                    - | Guest OS:        |  success   | OSPM:                 |                    - | process Ejection +----------->+ Execute _EJ0 method,  |                    - | request          |            | set eject bit in flags|                    - +------------------+            +-----------------------+                    -           |failure                         |                                 -           v                                v                                 - +------------------------+      +-----------------------+                    - | OSPM:                  |      | QEMU:                 |                    - | set OST event & status |      | call device unplug cb |                    - | fields                 |      |                       |                    - +------------------------+      +-----------------------+                    -          |                                  |                                -          v                                  v                                - +------------------+              +-------------------+                      - |QEMU:             |              |QEMU:              |                      - |Send OST QMP event|              |Send device deleted|                      - |                  |              |QMP event          |                      - +------------------+              |                   |                      -                                   +-------------------+ diff --git a/docs/specs/index.rst b/docs/specs/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/index.rst +++ b/docs/specs/index.rst @@ -XXX,XX +XXX,XX @@ guest hardware that is specific to QEMU. tpm acpi_hest_ghes acpi_cpu_hotplug + acpi_mem_hotplug -- 2.20.1 Convert the PCI hotplug spec document to rST. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> --- ...i_pci_hotplug.txt => acpi_pci_hotplug.rst} | 37 ++++++++++--------- docs/specs/index.rst | 1 + 2 files changed, 21 insertions(+), 17 deletions(-) rename docs/specs/{acpi_pci_hotplug.txt => acpi_pci_hotplug.rst} (51%) diff --git a/docs/specs/acpi_pci_hotplug.txt b/docs/specs/acpi_pci_hotplug.rst similarity index 51% rename from docs/specs/acpi_pci_hotplug.txt rename to docs/specs/acpi_pci_hotplug.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/acpi_pci_hotplug.txt +++ b/docs/specs/acpi_pci_hotplug.rst @@ -XXX,XX +XXX,XX @@ QEMU<->ACPI BIOS PCI hotplug interface --------------------------------------- +====================================== QEMU supports PCI hotplug via ACPI, for PCI bus 0. This document describes the interface between QEMU and the ACPI BIOS. -ACPI GPE block (IO ports 0xafe0-0xafe3, byte access): ------------------------------------------ +ACPI GPE block (IO ports 0xafe0-0xafe3, byte access) +---------------------------------------------------- Generic ACPI GPE block. Bit 1 (GPE.1) used to notify PCI hotplug/eject event to ACPI BIOS, via SCI interrupt. -PCI slot injection notification pending (IO port 0xae00-0xae03, 4-byte access): ---------------------------------------------------------------- +PCI slot injection notification pending (IO port 0xae00-0xae03, 4-byte access) +------------------------------------------------------------------------------ + Slot injection notification pending. One bit per slot. Read by ACPI BIOS GPE.1 handler to notify OS of injection events. Read-only. -PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access): ------------------------------------------------------ +PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access) +-------------------------------------------------------------------- + Slot removal notification pending. One bit per slot. Read by ACPI BIOS GPE.1 handler to notify OS of removal events. Read-only. -PCI device eject (IO port 0xae08-0xae0b, 4-byte access): ----------------------------------------- +PCI device eject (IO port 0xae08-0xae0b, 4-byte access) +------------------------------------------------------- Write: Used by ACPI BIOS _EJ0 method to request device removal. One bit per slot. Read: Hotplug features register. Used by platform to identify features available. Current base feature set (no bits set): - - Read-only "up" register @0xae00, 4-byte access, bit per slot - - Read-only "down" register @0xae04, 4-byte access, bit per slot - - Read/write "eject" register @0xae08, 4-byte access, - write: bit per slot eject, read: hotplug feature set - - Read-only hotplug capable register @0xae0c, 4-byte access, bit per slot -PCI removability status (IO port 0xae0c-0xae0f, 4-byte access): ------------------------------------------------ +- Read-only "up" register @0xae00, 4-byte access, bit per slot +- Read-only "down" register @0xae04, 4-byte access, bit per slot +- Read/write "eject" register @0xae08, 4-byte access, + write: bit per slot eject, read: hotplug feature set +- Read-only hotplug capable register @0xae0c, 4-byte access, bit per slot + +PCI removability status (IO port 0xae0c-0xae0f, 4-byte access) +-------------------------------------------------------------- Used by ACPI BIOS _RMV method to indicate removability status to OS. One -bit per slot. Read-only +bit per slot. Read-only. diff --git a/docs/specs/index.rst b/docs/specs/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/index.rst +++ b/docs/specs/index.rst @@ -XXX,XX +XXX,XX @@ guest hardware that is specific to QEMU. acpi_hest_ghes acpi_cpu_hotplug acpi_mem_hotplug + acpi_pci_hotplug -- 2.20.1 Convert the ACPI NVDIMM spec document to rST. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20210727170414.3368-5-peter.maydell@linaro.org --- docs/specs/acpi_nvdimm.rst | 228 +++++++++++++++++++++++++++++++++++++ docs/specs/acpi_nvdimm.txt | 188 ------------------------------ docs/specs/index.rst | 1 + 3 files changed, 229 insertions(+), 188 deletions(-) create mode 100644 docs/specs/acpi_nvdimm.rst delete mode 100644 docs/specs/acpi_nvdimm.txt diff --git a/docs/specs/acpi_nvdimm.rst b/docs/specs/acpi_nvdimm.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/specs/acpi_nvdimm.rst @@ -XXX,XX +XXX,XX @@ +QEMU<->ACPI BIOS NVDIMM interface +================================= + +QEMU supports NVDIMM via ACPI. This document describes the basic concepts of +NVDIMM ACPI and the interface between QEMU and the ACPI BIOS. + +NVDIMM ACPI Background +---------------------- + +NVDIMM is introduced in ACPI 6.0 which defines an NVDIMM root device under +_SB scope with a _HID of "ACPI0012". For each NVDIMM present or intended +to be supported by platform, platform firmware also exposes an ACPI +Namespace Device under the root device. + +The NVDIMM child devices under the NVDIMM root device are defined with _ADR +corresponding to the NFIT device handle. The NVDIMM root device and the +NVDIMM devices can have device specific methods (_DSM) to provide additional +functions specific to a particular NVDIMM implementation. + +This is an example from ACPI 6.0, a platform contains one NVDIMM:: + + Scope (\_SB){ + Device (NVDR) // Root device + { + Name (_HID, "ACPI0012") + Method (_STA) {...} + Method (_FIT) {...} + Method (_DSM, ...) {...} + Device (NVD) + { + Name(_ADR, h) //where h is NFIT Device Handle for this NVDIMM + Method (_DSM, ...) {...} + } + } + } + +Methods supported on both NVDIMM root device and NVDIMM device +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +_DSM (Device Specific Method) + It is a control method that enables devices to provide device specific + control functions that are consumed by the device driver. + The NVDIMM DSM specification can be found at + http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf + + Arguments: + + Arg0 + A Buffer containing a UUID (16 Bytes) + Arg1 + An Integer containing the Revision ID (4 Bytes) + Arg2 + An Integer containing the Function Index (4 Bytes) + Arg3 + A package containing parameters for the function specified by the + UUID, Revision ID, and Function Index + + Return Value: + + If Function Index = 0, a Buffer containing a function index bitfield. + Otherwise, the return value and type depends on the UUID, revision ID + and function index which are described in the DSM specification. + +Methods on NVDIMM ROOT Device +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +_FIT(Firmware Interface Table) + It evaluates to a buffer returning data in the format of a series of NFIT + Type Structure. + + Arguments: None + + Return Value: + A Buffer containing a list of NFIT Type structure entries. + + The detailed definition of the structure can be found at ACPI 6.0: 5.2.25 + NVDIMM Firmware Interface Table (NFIT). + +QEMU NVDIMM Implementation +-------------------------- + +QEMU uses 4 bytes IO Port starting from 0x0a18 and a RAM-based memory page +for NVDIMM ACPI. + +Memory: + QEMU uses BIOS Linker/loader feature to ask BIOS to allocate a memory + page and dynamically patch its address into an int32 object named "MEMA" + in ACPI. + + This page is RAM-based and it is used to transfer data between _DSM + method and QEMU. If ACPI has control, this pages is owned by ACPI which + writes _DSM input data to it, otherwise, it is owned by QEMU which + emulates _DSM access and writes the output data to it. + + ACPI writes _DSM Input Data (based on the offset in the page): + + [0x0 - 0x3] + 4 bytes, NVDIMM Device Handle. + + The handle is completely QEMU internal thing, the values in + range [1, 0xFFFF] indicate nvdimm device. Other values are + reserved for other purposes. + + Reserved handles: + + - 0 is reserved for nvdimm root device named NVDR. + - 0x10000 is reserved for QEMU internal DSM function called on + the root device. + + [0x4 - 0x7] + 4 bytes, Revision ID, that is the Arg1 of _DSM method. + + [0x8 - 0xB] + 4 bytes. Function Index, that is the Arg2 of _DSM method. + + [0xC - 0xFFF] + 4084 bytes, the Arg3 of _DSM method. + + QEMU writes Output Data (based on the offset in the page): + + [0x0 - 0x3] + 4 bytes, the length of result + + [0x4 - 0xFFF] + 4092 bytes, the DSM result filled by QEMU + +IO Port 0x0a18 - 0xa1b: + ACPI writes the address of the memory page allocated by BIOS to this + port then QEMU gets the control and fills the result in the memory page. + + Write Access: + + [0x0a18 - 0xa1b] + 4 bytes, the address of the memory page allocated by BIOS. + +_DSM process diagram +-------------------- + +"MEMA" indicates the address of memory page allocated by BIOS. + +:: + + +----------------------+ +-----------------------+ + | 1. OSPM | | 2. OSPM | + | save _DSM input data | | write "MEMA" to | Exit to QEMU + | to the page +----->| IO port 0x0a18 +------------+ + | indicated by "MEMA" | | | | + +----------------------+ +-----------------------+ | + | + v + +--------------------+ +-----------+ +------------------+--------+ + | 5 QEMU | | 4 QEMU | | 3. QEMU | + | write _DSM result | | emulate | | get _DSM input data from | + | to the page +<------+ _DSM +<-----+ the page indicated by the | + | | | | | value from the IO port | + +--------+-----------+ +-----------+ +---------------------------+ + | + | Enter Guest + | + v + +--------------------------+ +--------------+ + | 6 OSPM | | 7 OSPM | + | result size is returned | | _DSM return | + | by reading DSM +----->+ | + | result from the page | | | + +--------------------------+ +--------------+ + +NVDIMM hotplug +-------------- + +ACPI BIOS GPE.4 handler is dedicated for notifying OS about nvdimm device +hot-add event. + +QEMU internal use only _DSM functions +------------------------------------- + +Read FIT +^^^^^^^^ + +_FIT method uses _DSM method to fetch NFIT structures blob from QEMU +in 1 page sized increments which are then concatenated and returned +as _FIT method result. + +Input parameters: + +Arg0 + UUID {set to 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62} +Arg1 + Revision ID (set to 1) +Arg2 + Function Index, 0x1 +Arg3 + A package containing a buffer whose layout is as follows: + + +----------+--------+--------+-------------------------------------------+ + | Field | Length | Offset | Description | + +----------+--------+--------+-------------------------------------------+ + | offset | 4 | 0 | offset in QEMU's NFIT structures blob to | + | | | | read from | + +----------+--------+--------+-------------------------------------------+ + +Output layout in the dsm memory page: + + +----------+--------+--------+-------------------------------------------+ + | Field | Length | Offset | Description | + +----------+--------+--------+-------------------------------------------+ + | length | 4 | 0 | length of entire returned data | + | | | | (including this header) | + +----------+--------+--------+-------------------------------------------+ + | | | | return status codes | + | | | | | + | | | | - 0x0 - success | + | | | | - 0x100 - error caused by NFIT update | + | status | 4 | 4 | while read by _FIT wasn't completed | + | | | | - other codes follow Chapter 3 in | + | | | | DSM Spec Rev1 | + +----------+--------+--------+-------------------------------------------+ + | fit data | Varies | 8 | contains FIT data. This field is present | + | | | | if status field is 0. | + +----------+--------+--------+-------------------------------------------+ + +The FIT offset is maintained by the OSPM itself, current offset plus +the size of the fit data returned by the function is the next offset +OSPM should read. When all FIT data has been read out, zero fit data +size is returned. + +If it returns status code 0x100, OSPM should restart to read FIT (read +from offset 0 again). diff --git a/docs/specs/acpi_nvdimm.txt b/docs/specs/acpi_nvdimm.txt deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/specs/acpi_nvdimm.txt +++ /dev/null @@ -XXX,XX +XXX,XX @@ -QEMU<->ACPI BIOS NVDIMM interface ---------------------------------- - -QEMU supports NVDIMM via ACPI. This document describes the basic concepts of -NVDIMM ACPI and the interface between QEMU and the ACPI BIOS. - -NVDIMM ACPI Background ----------------------- -NVDIMM is introduced in ACPI 6.0 which defines an NVDIMM root device under -_SB scope with a _HID of “ACPI0012”. For each NVDIMM present or intended -to be supported by platform, platform firmware also exposes an ACPI -Namespace Device under the root device. - -The NVDIMM child devices under the NVDIMM root device are defined with _ADR -corresponding to the NFIT device handle. The NVDIMM root device and the -NVDIMM devices can have device specific methods (_DSM) to provide additional -functions specific to a particular NVDIMM implementation. - -This is an example from ACPI 6.0, a platform contains one NVDIMM: - -Scope (\_SB){ - Device (NVDR) // Root device - { - Name (_HID, “ACPI0012”) - Method (_STA) {...} - Method (_FIT) {...} - Method (_DSM, ...) {...} - Device (NVD) - { - Name(_ADR, h) //where h is NFIT Device Handle for this NVDIMM - Method (_DSM, ...) {...} - } - } -} - -Method supported on both NVDIMM root device and NVDIMM device -_DSM (Device Specific Method) - It is a control method that enables devices to provide device specific - control functions that are consumed by the device driver. - The NVDIMM DSM specification can be found at: - http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf - - Arguments: - Arg0 – A Buffer containing a UUID (16 Bytes) - Arg1 – An Integer containing the Revision ID (4 Bytes) - Arg2 – An Integer containing the Function Index (4 Bytes) - Arg3 – A package containing parameters for the function specified by the - UUID, Revision ID, and Function Index - - Return Value: - If Function Index = 0, a Buffer containing a function index bitfield. - Otherwise, the return value and type depends on the UUID, revision ID - and function index which are described in the DSM specification. - -Methods on NVDIMM ROOT Device -_FIT(Firmware Interface Table) - It evaluates to a buffer returning data in the format of a series of NFIT - Type Structure. - - Arguments: None - - Return Value: - A Buffer containing a list of NFIT Type structure entries. - - The detailed definition of the structure can be found at ACPI 6.0: 5.2.25 - NVDIMM Firmware Interface Table (NFIT). - -QEMU NVDIMM Implementation -========================== -QEMU uses 4 bytes IO Port starting from 0x0a18 and a RAM-based memory page -for NVDIMM ACPI. - -Memory: - QEMU uses BIOS Linker/loader feature to ask BIOS to allocate a memory - page and dynamically patch its address into an int32 object named "MEMA" - in ACPI. - - This page is RAM-based and it is used to transfer data between _DSM - method and QEMU. If ACPI has control, this pages is owned by ACPI which - writes _DSM input data to it, otherwise, it is owned by QEMU which - emulates _DSM access and writes the output data to it. - - ACPI writes _DSM Input Data (based on the offset in the page): - [0x0 - 0x3]: 4 bytes, NVDIMM Device Handle. - - The handle is completely QEMU internal thing, the values in - range [1, 0xFFFF] indicate nvdimm device. Other values are - reserved for other purposes. - - Reserved handles: - 0 is reserved for nvdimm root device named NVDR. - 0x10000 is reserved for QEMU internal DSM function called on - the root device. - - [0x4 - 0x7]: 4 bytes, Revision ID, that is the Arg1 of _DSM method. - [0x8 - 0xB]: 4 bytes. Function Index, that is the Arg2 of _DSM method. - [0xC - 0xFFF]: 4084 bytes, the Arg3 of _DSM method. - - QEMU Writes Output Data (based on the offset in the page): - [0x0 - 0x3]: 4 bytes, the length of result - [0x4 - 0xFFF]: 4092 bytes, the DSM result filled by QEMU - -IO Port 0x0a18 - 0xa1b: - ACPI writes the address of the memory page allocated by BIOS to this - port then QEMU gets the control and fills the result in the memory page. - - write Access: - [0x0a18 - 0xa1b]: 4 bytes, the address of the memory page allocated - by BIOS. - -_DSM process diagram: ---------------------- -"MEMA" indicates the address of memory page allocated by BIOS. - - +----------------------+   +-----------------------+ - |   1. OSPM   |      | 2. OSPM | - | save _DSM input data | | write "MEMA" to | Exit to QEMU - | to the page +----->| IO port 0x0a18 +------------+ - | indicated by "MEMA" | | | | - +----------------------+ +-----------------------+ | -  | -  v - +------------- ----+ +-----------+ +------------------+--------+ - | 5 QEMU | | 4 QEMU | | 3. QEMU | - | write _DSM result | | emulate | | get _DSM input data from | - | to the page +<------+ _DSM +<-----+ the page indicated by the | - | | | | | value from the IO port | - +--------+-----------+ +-----------+ +---------------------------+ - | - | Enter Guest - | - v - +--------------------------+ +--------------+ - | 6 OSPM | | 7 OSPM | - | result size is returned | | _DSM return | - | by reading DSM +----->+ | - | result from the page | | | - +--------------------------+ +--------------+ - -NVDIMM hotplug --------------- -ACPI BIOS GPE.4 handler is dedicated for notifying OS about nvdimm device -hot-add event. - -QEMU internal use only _DSM function ------------------------------------- -1) Read FIT - _FIT method uses _DSM method to fetch NFIT structures blob from QEMU - in 1 page sized increments which are then concatenated and returned - as _FIT method result. - - Input parameters: - Arg0 – UUID {set to 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62} - Arg1 – Revision ID (set to 1) - Arg2 - Function Index, 0x1 - Arg3 - A package containing a buffer whose layout is as follows: - - +----------+--------+--------+-------------------------------------------+ - | Field | Length | Offset | Description | - +----------+--------+--------+-------------------------------------------+ - | offset | 4 | 0 | offset in QEMU's NFIT structures blob to | - | | | | read from | - +----------+--------+--------+-------------------------------------------+ - - Output layout in the dsm memory page: - +----------+--------+--------+-------------------------------------------+ - | Field | Length | Offset | Description | - +----------+--------+--------+-------------------------------------------+ - | length | 4 | 0 | length of entire returned data | - | | | | (including this header) | - +----------+-----------------+-------------------------------------------+ - | | | | return status codes | - | | | | 0x0 - success | - | | | | 0x100 - error caused by NFIT update while | - | status | 4 | 4 | read by _FIT wasn't completed, other | - | | | | codes follow Chapter 3 in DSM Spec Rev1 | - +----------+-----------------+-------------------------------------------+ - | fit data | Varies | 8 | contains FIT data, this field is present | - | | | | if status field is 0; | - +----------+--------+--------+-------------------------------------------+ - - The FIT offset is maintained by the OSPM itself, current offset plus - the size of the fit data returned by the function is the next offset - OSPM should read. When all FIT data has been read out, zero fit data - size is returned. - - If it returns status code 0x100, OSPM should restart to read FIT (read - from offset 0 again). diff --git a/docs/specs/index.rst b/docs/specs/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/index.rst +++ b/docs/specs/index.rst @@ -XXX,XX +XXX,XX @@ guest hardware that is specific to QEMU. acpi_cpu_hotplug acpi_mem_hotplug acpi_pci_hotplug + acpi_nvdimm -- 2.20.1 Add entries for the ACPI specs documents in docs/specs to appropriate sections of MAINTAINERS. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20210727170414.3368-6-peter.maydell@linaro.org --- MAINTAINERS | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: qapi/acpi.json F: tests/qtest/bios-tables-test* F: tests/qtest/acpi-utils.[hc] F: tests/data/acpi/ +F: docs/specs/acpi_cpu_hotplug.rst +F: docs/specs/acpi_mem_hotplug.rst +F: docs/specs/acpi_pci_hotplug.rst +F: docs/specs/acpi_hw_reduced_hotplug.rst ACPI/HEST/GHES R: Dongjiu Geng <gengdongjiu1@gmail.com> @@ -XXX,XX +XXX,XX @@ F: hw/acpi/nvdimm.c F: hw/mem/nvdimm.c F: include/hw/mem/nvdimm.h F: docs/nvdimm.txt +F: docs/specs/acpi_nvdimm.rst e1000x M: Dmitry Fleytman <dmitry.fleytman@gmail.com> -- 2.20.1 The xen_available() function is used only to produce an error for some Xen-specific command line options in QEMU binaries where Xen support was not compiled in: it just returns the value of the CONFIG_XEN define. Now that accelerators are QOM classes, we can check for "does this binary have Xen compiled in" with accel_find("xen"), and drop the xen_available() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210730105947.28215-2-peter.maydell@linaro.org --- include/sysemu/arch_init.h | 1 - softmmu/arch_init.c | 9 --------- softmmu/vl.c | 6 +++--- 3 files changed, 3 insertions(+), 13 deletions(-) diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/arch_init.h +++ b/include/sysemu/arch_init.h @@ -XXX,XX +XXX,XX @@ enum { extern const uint32_t arch_type; int kvm_available(void); -int xen_available(void); /* default virtio transport per architecture */ #define QEMU_ARCH_VIRTIO_PCI (QEMU_ARCH_ALPHA | QEMU_ARCH_ARM | \ diff --git a/softmmu/arch_init.c b/softmmu/arch_init.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/arch_init.c +++ b/softmmu/arch_init.c @@ -XXX,XX +XXX,XX @@ int kvm_available(void) return 0; #endif } - -int xen_available(void) -{ -#ifdef CONFIG_XEN - return 1; -#else - return 0; -#endif -} diff --git a/softmmu/vl.c b/softmmu/vl.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/vl.c +++ b/softmmu/vl.c @@ -XXX,XX +XXX,XX @@ void qemu_init(int argc, char **argv, char **envp) has_defaults = 0; break; case QEMU_OPTION_xen_domid: - if (!(xen_available())) { + if (!(accel_find("xen"))) { error_report("Option not supported for this target"); exit(1); } xen_domid = atoi(optarg); break; case QEMU_OPTION_xen_attach: - if (!(xen_available())) { + if (!(accel_find("xen"))) { error_report("Option not supported for this target"); exit(1); } xen_mode = XEN_ATTACH; break; case QEMU_OPTION_xen_domid_restrict: - if (!(xen_available())) { + if (!(accel_find("xen"))) { error_report("Option not supported for this target"); exit(1); } -- 2.20.1 The kvm_available() function reports whether KVM support was compiled into the QEMU binary; it returns the value of the CONFIG_KVM define. The only place in the codebase where we use this function is in qmp_query_kvm(). Now that accelerators are based on QOM classes we can instead use accel_find("kvm") and remove the kvm_available() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210730105947.28215-3-peter.maydell@linaro.org --- include/sysemu/arch_init.h | 2 -- monitor/qmp-cmds.c | 2 +- softmmu/arch_init.c | 9 --------- 3 files changed, 1 insertion(+), 12 deletions(-) diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/arch_init.h +++ b/include/sysemu/arch_init.h @@ -XXX,XX +XXX,XX @@ enum { extern const uint32_t arch_type; -int kvm_available(void); - /* default virtio transport per architecture */ #define QEMU_ARCH_VIRTIO_PCI (QEMU_ARCH_ALPHA | QEMU_ARCH_ARM | \ QEMU_ARCH_HPPA | QEMU_ARCH_I386 | \ diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/monitor/qmp-cmds.c +++ b/monitor/qmp-cmds.c @@ -XXX,XX +XXX,XX @@ KvmInfo *qmp_query_kvm(Error **errp) KvmInfo *info = g_malloc0(sizeof(*info)); info->enabled = kvm_enabled(); - info->present = kvm_available(); + info->present = accel_find("kvm"); return info; } diff --git a/softmmu/arch_init.c b/softmmu/arch_init.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/arch_init.c +++ b/softmmu/arch_init.c @@ -XXX,XX +XXX,XX @@ int graphic_depth = 32; #endif const uint32_t arch_type = QEMU_ARCH; - -int kvm_available(void) -{ -#ifdef CONFIG_KVM - return 1; -#else - return 0; -#endif -} -- 2.20.1 arch_init.c does very little but has a long list of #include lines. Remove all the unnecessary ones. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210730105947.28215-4-peter.maydell@linaro.org --- softmmu/arch_init.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/softmmu/arch_init.c b/softmmu/arch_init.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/arch_init.c +++ b/softmmu/arch_init.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "sysemu/arch_init.h" -#include "hw/pci/pci.h" -#include "hw/audio/soundhw.h" -#include "qapi/error.h" -#include "qemu/config-file.h" -#include "qemu/error-report.h" -#include "hw/acpi/acpi.h" -#include "qemu/help_option.h" #ifdef TARGET_SPARC int graphic_width = 1024; -- 2.20.1 Instead of using an ifdef ladder in arch_init.c (which we then have to manually update every time we add or remove a target architecture), have meson.build put "#define QEMU_ARCH QEMU_ARCH_FOO" in the config-target.h file. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210730105947.28215-5-peter.maydell@linaro.org --- meson.build | 2 ++ softmmu/arch_init.c | 41 ----------------------------------------- 2 files changed, 2 insertions(+), 41 deletions(-) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs config_target_data.set(k, v) endif endforeach + config_target_data.set('QEMU_ARCH', + 'QEMU_ARCH_' + config_target['TARGET_BASE_ARCH'].to_upper()) config_target_h += {target: configure_file(output: target + '-config-target.h', configuration: config_target_data)} diff --git a/softmmu/arch_init.c b/softmmu/arch_init.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/arch_init.c +++ b/softmmu/arch_init.c @@ -XXX,XX +XXX,XX @@ int graphic_height = 600; int graphic_depth = 32; #endif - -#if defined(TARGET_ALPHA) -#define QEMU_ARCH QEMU_ARCH_ALPHA -#elif defined(TARGET_ARM) -#define QEMU_ARCH QEMU_ARCH_ARM -#elif defined(TARGET_CRIS) -#define QEMU_ARCH QEMU_ARCH_CRIS -#elif defined(TARGET_HPPA) -#define QEMU_ARCH QEMU_ARCH_HPPA -#elif defined(TARGET_I386) -#define QEMU_ARCH QEMU_ARCH_I386 -#elif defined(TARGET_M68K) -#define QEMU_ARCH QEMU_ARCH_M68K -#elif defined(TARGET_MICROBLAZE) -#define QEMU_ARCH QEMU_ARCH_MICROBLAZE -#elif defined(TARGET_MIPS) -#define QEMU_ARCH QEMU_ARCH_MIPS -#elif defined(TARGET_NIOS2) -#define QEMU_ARCH QEMU_ARCH_NIOS2 -#elif defined(TARGET_OPENRISC) -#define QEMU_ARCH QEMU_ARCH_OPENRISC -#elif defined(TARGET_PPC) -#define QEMU_ARCH QEMU_ARCH_PPC -#elif defined(TARGET_RISCV) -#define QEMU_ARCH QEMU_ARCH_RISCV -#elif defined(TARGET_RX) -#define QEMU_ARCH QEMU_ARCH_RX -#elif defined(TARGET_S390X) -#define QEMU_ARCH QEMU_ARCH_S390X -#elif defined(TARGET_SH4) -#define QEMU_ARCH QEMU_ARCH_SH4 -#elif defined(TARGET_SPARC) -#define QEMU_ARCH QEMU_ARCH_SPARC -#elif defined(TARGET_TRICORE) -#define QEMU_ARCH QEMU_ARCH_TRICORE -#elif defined(TARGET_XTENSA) -#define QEMU_ARCH QEMU_ARCH_XTENSA -#elif defined(TARGET_AVR) -#define QEMU_ARCH QEMU_ARCH_AVR -#endif - const uint32_t arch_type = QEMU_ARCH; -- 2.20.1 When Hexagon was added we forgot to add it to the QEMU_ARCH_* enumeration. This doesn't cause a visible effect because at the moment Hexagon is linux-user only and the QEMU_ARCH_* constants are only used in softmmu, but we might as well add it in, since it's the only architecture currently missing from the list. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-id: 20210730105947.28215-6-peter.maydell@linaro.org --- include/sysemu/arch_init.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/arch_init.h +++ b/include/sysemu/arch_init.h @@ -XXX,XX +XXX,XX @@ enum { QEMU_ARCH_RISCV = (1 << 19), QEMU_ARCH_RX = (1 << 20), QEMU_ARCH_AVR = (1 << 21), + QEMU_ARCH_HEXAGON = (1 << 22), QEMU_ARCH_NONE = (1 << 31), }; -- 2.20.1 The QEMU_ARCH_VIRTIO_* defines are used only in one file, qdev-monitor.c. Move them to that file. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 20210730105947.28215-7-peter.maydell@linaro.org --- include/sysemu/arch_init.h | 9 --------- softmmu/qdev-monitor.c | 9 +++++++++ 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/arch_init.h +++ b/include/sysemu/arch_init.h @@ -XXX,XX +XXX,XX @@ enum { extern const uint32_t arch_type; -/* default virtio transport per architecture */ -#define QEMU_ARCH_VIRTIO_PCI (QEMU_ARCH_ALPHA | QEMU_ARCH_ARM | \ - QEMU_ARCH_HPPA | QEMU_ARCH_I386 | \ - QEMU_ARCH_MIPS | QEMU_ARCH_PPC | \ - QEMU_ARCH_RISCV | QEMU_ARCH_SH4 | \ - QEMU_ARCH_SPARC | QEMU_ARCH_XTENSA) -#define QEMU_ARCH_VIRTIO_CCW (QEMU_ARCH_S390X) -#define QEMU_ARCH_VIRTIO_MMIO (QEMU_ARCH_M68K) - #endif diff --git a/softmmu/qdev-monitor.c b/softmmu/qdev-monitor.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/qdev-monitor.c +++ b/softmmu/qdev-monitor.c @@ -XXX,XX +XXX,XX @@ typedef struct QDevAlias uint32_t arch_mask; } QDevAlias; +/* default virtio transport per architecture */ +#define QEMU_ARCH_VIRTIO_PCI (QEMU_ARCH_ALPHA | QEMU_ARCH_ARM | \ + QEMU_ARCH_HPPA | QEMU_ARCH_I386 | \ + QEMU_ARCH_MIPS | QEMU_ARCH_PPC | \ + QEMU_ARCH_RISCV | QEMU_ARCH_SH4 | \ + QEMU_ARCH_SPARC | QEMU_ARCH_XTENSA) +#define QEMU_ARCH_VIRTIO_CCW (QEMU_ARCH_S390X) +#define QEMU_ARCH_VIRTIO_MMIO (QEMU_ARCH_M68K) + /* Please keep this table sorted by typename. */ static const QDevAlias qdev_alias_table[] = { { "AC97", "ac97" }, /* -soundhw name */ -- 2.20.1 arch_init.h only defines the QEMU_ARCH_* enumeration and the arch_type global. Don't include it in files that don't use those. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210730105947.28215-8-peter.maydell@linaro.org --- blockdev.c | 1 - hw/i386/pc.c | 1 - hw/i386/pc_piix.c | 1 - hw/i386/pc_q35.c | 1 - hw/mips/jazz.c | 1 - hw/mips/malta.c | 1 - hw/ppc/prep.c | 1 - hw/riscv/sifive_e.c | 1 - hw/riscv/sifive_u.c | 1 - hw/riscv/spike.c | 1 - hw/riscv/virt.c | 1 - monitor/qmp-cmds.c | 1 - target/ppc/cpu_init.c | 1 - target/s390x/cpu-sysemu.c | 1 - 14 files changed, 14 deletions(-) diff --git a/blockdev.c b/blockdev.c index XXXXXXX..XXXXXXX 100644 --- a/blockdev.c +++ b/blockdev.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/iothread.h" #include "block/block_int.h" #include "block/trace.h" -#include "sysemu/arch_init.h" #include "sysemu/runstate.h" #include "sysemu/replay.h" #include "qemu/cutils.h" diff --git a/hw/i386/pc.c b/hw/i386/pc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/pc.c +++ b/hw/i386/pc.c @@ -XXX,XX +XXX,XX @@ #include "hw/xen/start_info.h" #include "ui/qemu-spice.h" #include "exec/memory.h" -#include "sysemu/arch_init.h" #include "qemu/bitmap.h" #include "qemu/config-file.h" #include "qemu/error-report.h" diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/pc_piix.c +++ b/hw/i386/pc_piix.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/kvm.h" #include "hw/kvm/clock.h" #include "hw/sysbus.h" -#include "sysemu/arch_init.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/xen/xen-x86.h" #include "exec/memory.h" diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/pc_q35.c +++ b/hw/i386/pc_q35.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" #include "hw/loader.h" -#include "sysemu/arch_init.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/rtc/mc146818rtc.h" #include "sysemu/kvm.h" diff --git a/hw/mips/jazz.c b/hw/mips/jazz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/mips/jazz.c +++ b/hw/mips/jazz.c @@ -XXX,XX +XXX,XX @@ #include "hw/isa/isa.h" #include "hw/block/fdc.h" #include "sysemu/sysemu.h" -#include "sysemu/arch_init.h" #include "hw/boards.h" #include "net/net.h" #include "hw/scsi/esp.h" diff --git a/hw/mips/malta.c b/hw/mips/malta.c index XXXXXXX..XXXXXXX 100644 --- a/hw/mips/malta.c +++ b/hw/mips/malta.c @@ -XXX,XX +XXX,XX @@ #include "hw/mips/mips.h" #include "hw/mips/cpudevs.h" #include "hw/pci/pci.h" -#include "sysemu/arch_init.h" #include "qemu/log.h" #include "hw/mips/bios.h" #include "hw/ide.h" diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/prep.c +++ b/hw/ppc/prep.c @@ -XXX,XX +XXX,XX @@ #include "hw/rtc/mc146818rtc.h" #include "hw/isa/pc87312.h" #include "hw/qdev-properties.h" -#include "sysemu/arch_init.h" #include "sysemu/kvm.h" #include "sysemu/reset.h" #include "trace.h" diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -XXX,XX +XXX,XX @@ #include "hw/intc/sifive_plic.h" #include "hw/misc/sifive_e_prci.h" #include "chardev/char.h" -#include "sysemu/arch_init.h" #include "sysemu/sysemu.h" static const MemMapEntry sifive_e_memmap[] = { diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -XXX,XX +XXX,XX @@ #include "hw/intc/sifive_plic.h" #include "chardev/char.h" #include "net/eth.h" -#include "sysemu/arch_init.h" #include "sysemu/device_tree.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/riscv_htif.h" #include "hw/intc/sifive_clint.h" #include "chardev/char.h" -#include "sysemu/arch_init.h" #include "sysemu/device_tree.h" #include "sysemu/sysemu.h" diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -XXX,XX +XXX,XX @@ #include "hw/intc/sifive_plic.h" #include "hw/misc/sifive_test.h" #include "chardev/char.h" -#include "sysemu/arch_init.h" #include "sysemu/device_tree.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/monitor/qmp-cmds.c +++ b/monitor/qmp-cmds.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/kvm.h" #include "sysemu/runstate.h" #include "sysemu/runstate-action.h" -#include "sysemu/arch_init.h" #include "sysemu/blockdev.h" #include "sysemu/block-backend.h" #include "qapi/error.h" diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ #include "disas/dis-asm.h" #include "exec/gdbstub.h" #include "kvm_ppc.h" -#include "sysemu/arch_init.h" #include "sysemu/cpus.h" #include "sysemu/hw_accel.h" #include "sysemu/tcg.h" diff --git a/target/s390x/cpu-sysemu.c b/target/s390x/cpu-sysemu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu-sysemu.c +++ b/target/s390x/cpu-sysemu.c @@ -XXX,XX +XXX,XX @@ #include "hw/s390x/pv.h" #include "hw/boards.h" -#include "sysemu/arch_init.h" #include "sysemu/sysemu.h" #include "sysemu/tcg.h" #include "hw/core/sysemu-cpu-ops.h" -- 2.20.1 We added a stub for the arch_type global in commit 5964ed56d9a1 so that we could compile blockdev.c into the tools. However, in commit 9db1d3a2be9bf we removed the only use of arch_type from blockdev.c. The stub is therefore no longer needed, and we can delete it again, together with the QEMU_ARCH_NONE value that only the stub was using. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210730105947.28215-9-peter.maydell@linaro.org --- include/sysemu/arch_init.h | 2 -- stubs/arch_type.c | 4 ---- stubs/meson.build | 1 - 3 files changed, 7 deletions(-) delete mode 100644 stubs/arch_type.c diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/arch_init.h +++ b/include/sysemu/arch_init.h @@ -XXX,XX +XXX,XX @@ enum { QEMU_ARCH_RX = (1 << 20), QEMU_ARCH_AVR = (1 << 21), QEMU_ARCH_HEXAGON = (1 << 22), - - QEMU_ARCH_NONE = (1 << 31), }; extern const uint32_t arch_type; diff --git a/stubs/arch_type.c b/stubs/arch_type.c deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/stubs/arch_type.c +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#include "qemu/osdep.h" -#include "sysemu/arch_init.h" - -const uint32_t arch_type = QEMU_ARCH_NONE; diff --git a/stubs/meson.build b/stubs/meson.build index XXXXXXX..XXXXXXX 100644 --- a/stubs/meson.build +++ b/stubs/meson.build @@ -XXX,XX +XXX,XX @@ -stub_ss.add(files('arch_type.c')) stub_ss.add(files('bdrv-next-monitor-owned.c')) stub_ss.add(files('blk-commit-all.c')) stub_ss.add(files('blk-exp-close-all.c')) -- 2.20.1 The gunzip() function reads various fields from a passed in source buffer in order to skip a header before passing the actual compressed data to the zlib inflate() function. It does check whether the passed in buffer is too small, but unfortunately it checks that only after reading bytes from the src buffer, so it could read off the end of the buffer. You can see this with valgrind: $ printf "%b" '\x1f\x8b' > /tmp/image $ valgrind qemu-system-aarch64 -display none -M virt -cpu max -kernel /tmp/image [...] ==19224== Invalid read of size 1 ==19224== at 0x67302E: gunzip (loader.c:558) ==19224== by 0x673907: load_image_gzipped_buffer (loader.c:788) ==19224== by 0xA18032: load_aarch64_image (boot.c:932) ==19224== by 0xA18489: arm_setup_direct_kernel_boot (boot.c:1063) ==19224== by 0xA18D90: arm_load_kernel (boot.c:1317) ==19224== by 0x9F3651: machvirt_init (virt.c:2114) ==19224== by 0x794B7A: machine_run_board_init (machine.c:1272) ==19224== by 0xD5CAD3: qemu_init_board (vl.c:2618) ==19224== by 0xD5CCA6: qmp_x_exit_preconfig (vl.c:2692) ==19224== by 0xD5F32E: qemu_init (vl.c:3713) ==19224== by 0x5ADDB1: main (main.c:49) ==19224== Address 0x3802a873 is 0 bytes after a block of size 3 alloc'd ==19224== at 0x4C31B0F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) ==19224== by 0x61E7657: g_file_get_contents (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.5600.4) ==19224== by 0x673895: load_image_gzipped_buffer (loader.c:771) ==19224== by 0xA18032: load_aarch64_image (boot.c:932) ==19224== by 0xA18489: arm_setup_direct_kernel_boot (boot.c:1063) ==19224== by 0xA18D90: arm_load_kernel (boot.c:1317) ==19224== by 0x9F3651: machvirt_init (virt.c:2114) ==19224== by 0x794B7A: machine_run_board_init (machine.c:1272) ==19224== by 0xD5CAD3: qemu_init_board (vl.c:2618) ==19224== by 0xD5CCA6: qmp_x_exit_preconfig (vl.c:2692) ==19224== by 0xD5F32E: qemu_init (vl.c:3713) ==19224== by 0x5ADDB1: main (main.c:49) Check that we have enough bytes of data to read the header bytes that we read before we read them. Fixes: Coverity 1458997 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210812141803.20913-1-peter.maydell@linaro.org --- hw/core/loader.c | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen) /* skip header */ i = 10; + if (srclen < 4) { + goto toosmall; + } flags = src[3]; if (src[2] != DEFLATED || (flags & RESERVED) != 0) { puts ("Error: Bad gzipped data\n"); return -1; } - if ((flags & EXTRA_FIELD) != 0) + if ((flags & EXTRA_FIELD) != 0) { + if (srclen < 12) { + goto toosmall; + } i = 12 + src[10] + (src[11] << 8); - if ((flags & ORIG_NAME) != 0) - while (src[i++] != 0) - ; - if ((flags & COMMENT) != 0) - while (src[i++] != 0) - ; - if ((flags & HEAD_CRC) != 0) + } + if ((flags & ORIG_NAME) != 0) { + while (i < srclen && src[i++] != 0) { + /* do nothing */ + } + } + if ((flags & COMMENT) != 0) { + while (i < srclen && src[i++] != 0) { + /* do nothing */ + } + } + if ((flags & HEAD_CRC) != 0) { i += 2; + } if (i >= srclen) { - puts ("Error: gunzip out of data in header\n"); - return -1; + goto toosmall; } s.zalloc = zalloc; @@ -XXX,XX +XXX,XX @@ ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen) inflateEnd(&s); return dstbytes; + +toosmall: + puts("Error: gunzip out of data in header\n"); + return -1; } /* Load a U-Boot image. */ -- 2.20.1 In the alignment check added to qemu_ram_alloc_from_fd() in commit ce317be98db0dfdfa, the condition includes a check that 'mr' is not NULL. This check is unnecessary because we can assume that the caller always passes us a valid MemoryRegion, and indeed later in the function we assume mr is not NULL when we pass it to file_ram_alloc() as new_block->mr. Remove it. Fixes: Coverity 1459867 Fixes: ce317be98d ("exec: fetch the alignment of Linux devdax pmem character device nodes") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Message-id: 20210812150624.29139-1-peter.maydell@linaro.org --- softmmu/physmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/softmmu/physmem.c b/softmmu/physmem.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/physmem.c +++ b/softmmu/physmem.c @@ -XXX,XX +XXX,XX @@ RAMBlock *qemu_ram_alloc_from_fd(ram_addr_t size, MemoryRegion *mr, } file_align = get_file_align(fd); - if (file_align > 0 && mr && file_align > mr->align) { + if (file_align > 0 && file_align > mr->align) { error_setg(errp, "backing store align 0x%" PRIx64 " is larger than 'align' option 0x%" PRIx64, file_align, mr->align); -- 2.20.1 The realpath() function can return NULL on error, so we need to check for it to avoid crashing when we try to strstr() into it. This can happen if we run out of memory, or if /sys/ is not mounted, among other situations. Fixes: Coverity 1459913, 1460474 Fixes: ce317be98db0 ("exec: fetch the alignment of Linux devdax pmem character device nodes") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Message-id: 20210812151525.31456-1-peter.maydell@linaro.org --- softmmu/physmem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/softmmu/physmem.c b/softmmu/physmem.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/physmem.c +++ b/softmmu/physmem.c @@ -XXX,XX +XXX,XX @@ static int64_t get_file_align(int fd) path = g_strdup_printf("/sys/dev/char/%d:%d", major(st.st_rdev), minor(st.st_rdev)); rpath = realpath(path, NULL); + if (!rpath) { + return -errno; + } rc = daxctl_new(&ctx); if (rc) { -- 2.20.1 We don't currently zero-initialize the 'struct sockaddr_in' that parse_host_port() fills in, so any fields we don't explicitly initialize might be left as random garbage. POSIX states that implementations may define extensions in sockaddr_in, and that those extensions must not trigger if zero-initialized. So not zero initializing might result in inadvertently triggering an impdef extension. memset() the sockaddr_in before we start to fill it in. Fixes: Coverity CID 1005338 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20210813150506.7768-2-peter.maydell@linaro.org --- net/net.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/net.c b/net/net.c index XXXXXXX..XXXXXXX 100644 --- a/net/net.c +++ b/net/net.c @@ -XXX,XX +XXX,XX @@ int parse_host_port(struct sockaddr_in *saddr, const char *str, const char *addr, *p, *r; int port, ret = 0; + memset(saddr, 0, sizeof(*saddr)); + substrings = g_strsplit(str, ":", 2); if (!substrings || !substrings[0] || !substrings[1]) { error_setg(errp, "host address '%s' doesn't contain ':' " -- 2.20.1 Zero-initialize sockaddr_in and sockaddr_un structs that we're about to fill in and pass to bind() or connect(), to ensure we don't leave possible implementation-defined extension fields as uninitialized garbage. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20210813150506.7768-3-peter.maydell@linaro.org --- gdbstub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/gdbstub.c b/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/gdbstub.c +++ b/gdbstub.c @@ -XXX,XX +XXX,XX @@ static bool gdb_accept_socket(int gdb_fd) static int gdbserver_open_socket(const char *path) { - struct sockaddr_un sockaddr; + struct sockaddr_un sockaddr = {}; int fd, ret; fd = socket(AF_UNIX, SOCK_STREAM, 0); @@ -XXX,XX +XXX,XX @@ static int gdbserver_open_socket(const char *path) static bool gdb_accept_tcp(int gdb_fd) { - struct sockaddr_in sockaddr; + struct sockaddr_in sockaddr = {}; socklen_t len; int fd; -- 2.20.1 Zero-initialize the sockaddr_in struct that we're about to fill in and pass to bind(), to ensure we don't leave possible implementation-defined extension fields as uninitialized garbage. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-id: 20210813150506.7768-4-peter.maydell@linaro.org --- tests/qtest/ipmi-bt-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/qtest/ipmi-bt-test.c b/tests/qtest/ipmi-bt-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/ipmi-bt-test.c +++ b/tests/qtest/ipmi-bt-test.c @@ -XXX,XX +XXX,XX @@ static void test_enable_irq(void) */ static void open_socket(void) { - struct sockaddr_in myaddr; + struct sockaddr_in myaddr = {}; socklen_t addrlen; myaddr.sin_family = AF_INET; -- 2.20.1 Zero-initialize sockaddr_in and sockaddr_un structs that we're about to fill in and pass to bind() or connect(), to ensure we don't leave possible implementation-defined extension fields as uninitialized garbage. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20210813150506.7768-5-peter.maydell@linaro.org --- tests/tcg/multiarch/linux-test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/tcg/multiarch/linux-test.c b/tests/tcg/multiarch/linux-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/multiarch/linux-test.c +++ b/tests/tcg/multiarch/linux-test.c @@ -XXX,XX +XXX,XX @@ static void test_time(void) static int server_socket(void) { int val, fd; - struct sockaddr_in sockaddr; + struct sockaddr_in sockaddr = {}; /* server socket */ fd = chk_error(socket(PF_INET, SOCK_STREAM, 0)); @@ -XXX,XX +XXX,XX @@ static int server_socket(void) static int client_socket(uint16_t port) { int fd; - struct sockaddr_in sockaddr; + struct sockaddr_in sockaddr = {}; /* server socket */ fd = chk_error(socket(PF_INET, SOCK_STREAM, 0)); -- 2.20.1 The SoC realize can fail for legitimate reasons, because it propagates errors up from CPU realize, which in turn can be provoked by user error in setting commandline options. Use error_fatal so we report the error message to the user and exit, rather than asserting via error_abort. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210816135842.25302-2-peter.maydell@linaro.org --- hw/arm/raspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_machine_init(MachineState *machine) object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(machine->ram)); object_property_set_int(OBJECT(&s->soc), "board-rev", board_rev, &error_abort); - qdev_realize(DEVICE(&s->soc), NULL, &error_abort); + qdev_realize(DEVICE(&s->soc), NULL, &error_fatal); /* Create and plug in the SD cards */ di = drive_get_next(IF_SD); -- 2.20.1 KVM cannot support multiple address spaces per CPU; if you try to create more than one then cpu_address_space_init() will assert. In the Arm CPU realize function, detect the configurations which would cause us to need more than one AS, and cleanly fail the realize rather than blundering on into the assertion. This turns this: $ qemu-system-aarch64 -enable-kvm -display none -cpu max -machine raspi3b qemu-system-aarch64: ../../softmmu/physmem.c:747: cpu_address_space_init: Assertion `asidx == 0 || !kvm_enabled()' failed. Aborted into: $ qemu-system-aarch64 -enable-kvm -display none -machine raspi3b qemu-system-aarch64: Cannot enable KVM when guest CPU has EL3 enabled and this: $ qemu-system-aarch64 -enable-kvm -display none -machine mps3-an524 qemu-system-aarch64: ../../softmmu/physmem.c:747: cpu_address_space_init: Assertion `asidx == 0 || !kvm_enabled()' failed. Aborted into: $ qemu-system-aarch64 -enable-kvm -display none -machine mps3-an524 qemu-system-aarch64: Cannot enable KVM when using an M-profile guest CPU Fixes: https://gitlab.com/qemu-project/qemu/-/issues/528 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210816135842.25302-3-peter.maydell@linaro.org --- target/arm/cpu.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } } + if (kvm_enabled()) { + /* + * Catch all the cases which might cause us to create more than one + * address space for the CPU (otherwise we will assert() later in + * cpu_address_space_init()). + */ + if (arm_feature(env, ARM_FEATURE_M)) { + error_setg(errp, + "Cannot enable KVM when using an M-profile guest CPU"); + return; + } + if (cpu->has_el3) { + error_setg(errp, + "Cannot enable KVM when guest CPU has EL3 enabled"); + return; + } + if (cpu->tag_memory) { + error_setg(errp, + "Cannot enable KVM when guest CPUs has MTE enabled"); + return; + } + } + { uint64_t scale; -- 2.20.1 Now that the CPU realize function will fail cleanly if we ask for EL3 when KVM is enabled, we don't need to check for errors explicitly in the virt board code. The reported message is slightly different; it is now: qemu-system-aarch64: Cannot enable KVM when guest CPU has EL3 enabled instead of: qemu-system-aarch64: mach-virt: KVM does not support Security extensions We don't delete the MTE check because there the logic is more complex; deleting the check would work but makes the error message less helpful, as it would read: qemu-system-aarch64: MTE requested, but not supported by the guest CPU instead of: qemu-system-aarch64: mach-virt: KVM does not support providing MTE to the guest CPU Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210816135842.25302-4-peter.maydell@linaro.org --- hw/arm/virt.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) } if (vms->secure) { - if (kvm_enabled()) { - error_report("mach-virt: KVM does not support Security extensions"); - exit(1); - } - /* * The Secure view of the world is the same as the NonSecure, * but with a few extra devices. Create it as a container region -- 2.20.1 In v7, the HSTR register has a TTEE bit which allows EL0/EL1 accesses to the Thumb2EE TEECR and TEEHBR registers to be trapped to the hypervisor. Implement these traps. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210816180305.20137-2-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/helper.c | 18 ++++++++++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define SCR_ENSCXT (1U << 25) #define SCR_ATA (1U << 26) +#define HSTR_TTEE (1 << 16) + /* Return the current FPSCR value. */ uint32_t vfp_get_fpscr(CPUARMState *env); void vfp_set_fpscr(CPUARMState *env, uint32_t val); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void teecr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->teecr = value; } +static CPAccessResult teecr_access(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + /* + * HSTR.TTEE only exists in v7A, not v8A, but v8A doesn't have T2EE + * at all, so we don't need to check whether we're v8A. + */ + if (arm_current_el(env) < 2 && !arm_is_secure_below_el3(env) && + (env->cp15.hstr_el2 & HSTR_TTEE)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static CPAccessResult teehbr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (arm_current_el(env) == 0 && (env->teecr & 1)) { return CP_ACCESS_TRAP; } - return CP_ACCESS_OK; + return teecr_access(env, ri, isread); } static const ARMCPRegInfo t2ee_cp_reginfo[] = { { .name = "TEECR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 6, .opc2 = 0, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, teecr), .resetvalue = 0, - .writefn = teecr_write }, + .writefn = teecr_write, .accessfn = teecr_access }, { .name = "TEEHBR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0, .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, teehbr), .accessfn = teehbr_access, .resetvalue = 0 }, -- 2.20.1 In v7A, the HSTR register has a TJDBX bit which traps NS EL0/EL1 access to the JOSCR and JMCR trivial Jazelle registers, and also BXJ. Implement these traps. In v8A this HSTR bit doesn't exist, so don't trap for v8A CPUs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210816180305.20137-3-peter.maydell@linaro.org --- target/arm/cpu.h | 1 + target/arm/helper.h | 2 ++ target/arm/syndrome.h | 7 +++++++ target/arm/helper.c | 17 +++++++++++++++++ target/arm/op_helper.c | 16 ++++++++++++++++ target/arm/translate.c | 12 ++++++++++++ 6 files changed, 55 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) #define SCR_ATA (1U << 26) #define HSTR_TTEE (1 << 16) +#define HSTR_TJDBX (1 << 17) /* Return the current FPSCR value. */ uint32_t vfp_get_fpscr(CPUARMState *env); diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) +DEF_HELPER_FLAGS_2(check_bxj_trap, TCG_CALL_NO_WG, void, env, i32) + DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) DEF_HELPER_3(set_cp_reg, void, env, ptr, i32) DEF_HELPER_2(get_cp_reg, i32, env, ptr) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_ADVSIMDFPACCESSTRAP = 0x07, EC_FPIDTRAP = 0x08, EC_PACTRAP = 0x09, + EC_BXJTRAP = 0x0a, EC_CP14RRTTRAP = 0x0c, EC_BTITRAP = 0x0d, EC_ILLEGALSTATE = 0x0e, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_btitrap(int btype) return (EC_BTITRAP << ARM_EL_EC_SHIFT) | btype; } +static inline uint32_t syn_bxjtrap(int cv, int cond, int rm) +{ + return (EC_BXJTRAP << ARM_EL_EC_SHIFT) | ARM_EL_IL | + (cv << 24) | (cond << 20) | rm; +} + static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) { return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_jazelle(CPUARMState *env, const ARMCPRegInfo *ri, return CP_ACCESS_OK; } +static CPAccessResult access_joscr_jmcr(CPUARMState *env, + const ARMCPRegInfo *ri, bool isread) +{ + /* + * HSTR.TJDBX traps JOSCR and JMCR accesses, but it exists only + * in v7A, not in v8A. + */ + if (!arm_feature(env, ARM_FEATURE_V8) && + arm_current_el(env) < 2 && !arm_is_secure_below_el3(env) && + (env->cp15.hstr_el2 & HSTR_TJDBX)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + static const ARMCPRegInfo jazelle_regs[] = { { .name = "JIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 7, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo jazelle_regs[] = { .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "JOSCR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 7, .opc2 = 0, + .accessfn = access_joscr_jmcr, .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "JMCR", .cp = 14, .crn = 2, .crm = 0, .opc1 = 7, .opc2 = 0, + .accessfn = access_joscr_jmcr, .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, REGINFO_SENTINEL }; diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(setend)(CPUARMState *env) arm_rebuild_hflags(env); } +void HELPER(check_bxj_trap)(CPUARMState *env, uint32_t rm) +{ + /* + * Only called if in NS EL0 or EL1 for a BXJ for a v7A CPU; + * check if HSTR.TJDBX means we need to trap to EL2. + */ + if (env->cp15.hstr_el2 & HSTR_TJDBX) { + /* + * We know the condition code check passed, so take the IMPDEF + * choice to always report CV=1 COND 0xe + */ + uint32_t syn = syn_bxjtrap(1, 0xe, rm); + raise_exception_ra(env, EXCP_HYP_TRAP, syn, 2, GETPC()); + } +} + #ifndef CONFIG_USER_ONLY /* Function checks whether WFx (WFI/WFE) instructions are set up to be trapped. * The function returns the target EL (1-3) if the instruction is to be trapped; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_BXJ(DisasContext *s, arg_BXJ *a) if (!ENABLE_ARCH_5J || arm_dc_feature(s, ARM_FEATURE_M)) { return false; } + /* + * v7A allows BXJ to be trapped via HSTR.TJDBX. We don't waste a + * TBFLAGS bit on a basically-never-happens case, so call a helper + * function to check for the trap and raise the exception if needed + * (passing it the register number for the syndrome value). + * v8A doesn't have this HSTR bit. + */ + if (!arm_dc_feature(s, ARM_FEATURE_V8) && + arm_dc_feature(s, ARM_FEATURE_EL2) && + s->current_el < 2 && s->ns) { + gen_helper_check_bxj_trap(cpu_env, tcg_constant_i32(a->rm)); + } /* Trivial implementation equivalent to bx. */ gen_bx(s, load_reg(s, a->rm)); return true; -- 2.20.1 Currently we rely on all the callsites of cpsr_write() to rebuild the cached hflags if they change one of the CPSR bits which we use as a TB flag and cache in hflags. This is a bit awkward when we want to change the set of CPSR bits that we cache, because it means we need to re-audit all the cpsr_write() callsites to see which flags they are writing and whether they now need to rebuild the hflags. Switch instead to making cpsr_write() call arm_rebuild_hflags() itself if one of the bits being changed is a cached bit. We don't do the rebuild for the CPSRWriteRaw write type, because that kind of write is generally doing something special anyway. For the CPSRWriteRaw callsites in the KVM code and inbound migration we definitely don't want to recalculate the hflags; the callsites in boot.c and arm-powerctl.c have to do a rebuild-hflags call themselves anyway because of other CPU state changes they make. This allows us to drop explicit arm_rebuild_hflags() calls in a couple of places where the only reason we needed to call it was the CPSR write. This fixes a bug where we were incorrectly failing to rebuild hflags in the code path for a gdbstub write to CPSR, which meant that you could make QEMU assert by breaking into a running guest, altering the CPSR to change the value of, for example, CPSR.E, and then continuing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210817201843.3829-1-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++++-- linux-user/arm/signal.c | 2 -- target/arm/helper.c | 5 +++++ 3 files changed, 13 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ uint32_t cpsr_read(CPUARMState *env); typedef enum CPSRWriteType { CPSRWriteByInstr = 0, /* from guest MSR or CPS */ CPSRWriteExceptionReturn = 1, /* from guest exception return insn */ - CPSRWriteRaw = 2, /* trust values, do not switch reg banks */ + CPSRWriteRaw = 2, + /* trust values, no reg bank switch, no hflags rebuild */ CPSRWriteByGDBStub = 3, /* from the GDB stub */ } CPSRWriteType; -/* Set the CPSR. Note that some bits of mask must be all-set or all-clear.*/ +/* + * Set the CPSR. Note that some bits of mask must be all-set or all-clear. + * This will do an arm_rebuild_hflags() if any of the bits in @mask + * correspond to TB flags bits cached in the hflags, unless @write_type + * is CPSRWriteRaw. + */ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, CPSRWriteType write_type); diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ setup_return(CPUARMState *env, struct target_sigaction *ka, env->regs[14] = retcode; env->regs[15] = handler & (thumb ? ~1 : ~3); cpsr_write(env, cpsr, CPSR_IT | CPSR_T | CPSR_E, CPSRWriteByInstr); - arm_rebuild_hflags(env); return 0; } @@ -XXX,XX +XXX,XX @@ restore_sigcontext(CPUARMState *env, struct target_sigcontext *sc) __get_user(env->regs[15], &sc->arm_pc); __get_user(cpsr, &sc->arm_cpsr); cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC, CPSRWriteByInstr); - arm_rebuild_hflags(env); err |= !valid_user_regs(env); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, CPSRWriteType write_type) { uint32_t changed_daif; + bool rebuild_hflags = (write_type != CPSRWriteRaw) && + (mask & (CPSR_M | CPSR_E | CPSR_IL)); if (mask & CPSR_NZCV) { env->ZF = (~val) & CPSR_Z; @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, } mask &= ~CACHED_CPSR_BITS; env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask); + if (rebuild_hflags) { + arm_rebuild_hflags(env); + } } /* Sign/zero extend */ -- 2.20.1 From: Tong Ho <tong.ho@xilinx.com> Add unimplemented APU mmio region to xlnx-versal for booting bare-metal guests built with standalone bsp, which access the region from one of the following places: https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139 https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183 Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Tong Ho <tong.ho@xilinx.com> Message-id: 20210823173818.201259-2-tong.ho@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 2 ++ hw/arm/xlnx-versal.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ struct Versal { #define MM_IOU_SCNTRS_SIZE 0x10000 #define MM_FPD_CRF 0xfd1a0000U #define MM_FPD_CRF_SIZE 0x140000 +#define MM_FPD_FPD_APU 0xfd5c0000 +#define MM_FPD_FPD_APU_SIZE 0x100 #define MM_PMC_SD0 0xf1040000U #define MM_PMC_SD0_SIZE 0x10000 diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_unimp(Versal *s) MM_CRL, MM_CRL_SIZE); versal_unimp_area(s, "crf", &s->mr_ps, MM_FPD_CRF, MM_FPD_CRF_SIZE); + versal_unimp_area(s, "apu", &s->mr_ps, + MM_FPD_FPD_APU, MM_FPD_FPD_APU_SIZE); versal_unimp_area(s, "crp", &s->mr_ps, MM_PMC_CRP, MM_PMC_CRP_SIZE); versal_unimp_area(s, "iou-scntr", &s->mr_ps, -- 2.20.1 From: Tong Ho <tong.ho@xilinx.com> Add unimplemented APU mmio region to xlnx-zynqmp for booting bare-metal guests built with standalone bsp, which access the region from one of the following places: https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139 https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183 Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Tong Ho <tong.ho@xilinx.com> Message-id: 20210823173818.201259-3-tong.ho@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 7 +++++++ hw/arm/xlnx-zynqmp.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) #define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \ XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE) +/* + * Unimplemented mmio regions needed to boot some images. + */ +#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 1 + struct XlnxZynqMPState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ struct XlnxZynqMPState { MemoryRegion *ddr_ram; MemoryRegion ddr_ram_low, ddr_ram_high; + MemoryRegion mr_unimp[XLNX_ZYNQMP_NUM_UNIMP_AREAS]; + CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS]; CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS]; XlnxZynqMPCANState can[XLNX_ZYNQMP_NUM_CAN]; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "hw/arm/xlnx-zynqmp.h" #include "hw/intc/arm_gic_common.h" +#include "hw/misc/unimp.h" #include "hw/boards.h" #include "sysemu/kvm.h" #include "sysemu/sysemu.h" @@ -XXX,XX +XXX,XX @@ #define DPDMA_ADDR 0xfd4c0000 #define DPDMA_IRQ 116 +#define APU_ADDR 0xfd5c0000 +#define APU_SIZE 0x100 + #define IPI_ADDR 0xFF300000 #define IPI_IRQ 64 @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_create_rpu(MachineState *ms, XlnxZynqMPState *s, qdev_realize(DEVICE(&s->rpu_cluster), NULL, &error_fatal); } +static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s) +{ + static const struct UnimpInfo { + const char *name; + hwaddr base; + hwaddr size; + } unimp_areas[ARRAY_SIZE(s->mr_unimp)] = { + { .name = "apu", APU_ADDR, APU_SIZE }, + }; + unsigned int nr; + + for (nr = 0; nr < ARRAY_SIZE(unimp_areas); nr++) { + const struct UnimpInfo *info = &unimp_areas[nr]; + DeviceState *dev = qdev_new(TYPE_UNIMPLEMENTED_DEVICE); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + assert(info->name && info->base && info->size > 0); + qdev_prop_set_string(dev, "name", info->name); + qdev_prop_set_uint64(dev, "size", info->size); + object_property_add_child(OBJECT(s), info->name, OBJECT(dev)); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, info->base); + } +} + static void xlnx_zynqmp_init(Object *obj) { MachineState *ms = MACHINE(qdev_get_machine()); @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR); sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]); + xlnx_zynqmp_create_unimp_mmio(s); + for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) { if (!object_property_set_uint(OBJECT(&s->gdma[i]), "bus-width", 128, errp)) { -- 2.20.1 Hi; here's the first target-arm pullreq for the 7.0 cycle. thanks -- PMM The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2021-12-14 12:46:18 -0800) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20211215 for you to fetch changes up to aed176558806674d030a8305d989d4e6a5073359: tests/acpi: add expected blob for VIOT test on virt machine (2021-12-15 10:35:26 +0000) ---------------------------------------------------------------- target-arm queue: * ITS: error reporting cleanup * aspeed: improve documentation * Fix STM32F2XX USART data register readout * allow emulated GICv3 to be disabled in non-TCG builds * fix exception priority for singlestep, misaligned PC, bp, etc * Correct calculation of tlb range invalidate length * npcm7xx_emc: fix missing queue_flush * virt: Add VIOT ACPI table for virtio-iommu * target/i386: Use assert() to sanity-check b1 in SSE decode * Don't include qemu-common unnecessarily ---------------------------------------------------------------- Alex Bennée (1): hw/intc: clean-up error reporting for failed ITS cmd Jean-Philippe Brucker (8): hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu hw/arm/virt: Remove device tree restriction for virtio-iommu hw/arm/virt: Reject instantiation of multiple IOMMUs hw/arm/virt: Use object_property_set instead of qdev_prop_set tests/acpi: allow updates of VIOT expected data files tests/acpi: add test case for VIOT tests/acpi: add expected blobs for VIOT test on q35 machine tests/acpi: add expected blob for VIOT test on virt machine Joel Stanley (4): docs: aspeed: Add new boards docs: aspeed: Update OpenBMC image URL docs: aspeed: Give an example of booting a kernel docs: aspeed: ADC is now modelled Olivier Hériveaux (1): Fix STM32F2XX USART data register readout Patrick Venture (1): hw/net: npcm7xx_emc fix missing queue_flush Peter Maydell (6): target/i386: Use assert() to sanity-check b1 in SSE decode include/hw/i386: Don't include qemu-common.h in .h files target/hexagon/cpu.h: don't include qemu-common.h target/rx/cpu.h: Don't include qemu-common.h hw/arm: Don't include qemu-common.h unnecessarily target/arm: Correct calculation of tlb range invalidate length Philippe Mathieu-Daudé (2): hw/intc/arm_gicv3: Extract gicv3_set_gicv3state from arm_gicv3_cpuif.c hw/intc/arm_gicv3: Introduce CONFIG_ARM_GIC_TCG Kconfig selector Richard Henderson (10): target/arm: Hoist pc_next to a local variable in aarch64_tr_translate_insn target/arm: Hoist pc_next to a local variable in arm_tr_translate_insn target/arm: Hoist pc_next to a local variable in thumb_tr_translate_insn target/arm: Split arm_pre_translate_insn target/arm: Advance pc for arch single-step exception target/arm: Split compute_fsr_fsc out of arm_deliver_fault target/arm: Take an exception if PC is misaligned target/arm: Assert thumb pc is aligned target/arm: Suppress bp for exceptions with more priority tests/tcg: Add arm and aarch64 pc alignment tests docs/system/arm/aspeed.rst | 26 ++++++++++++---- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - target/arm/helper.h | 1 + target/arm/syndrome.h | 5 +++ target/hexagon/cpu.h | 1 - target/rx/cpu.h | 1 - hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt-acpi-build.c | 7 +++++ hw/arm/virt.c | 21 ++++++------- hw/char/stm32f2xx_usart.c | 3 +- hw/intc/arm_gicv3.c | 2 +- hw/intc/arm_gicv3_cpuif.c | 10 +----- hw/intc/arm_gicv3_cpuif_common.c | 22 +++++++++++++ hw/intc/arm_gicv3_its.c | 39 +++++++++++++++-------- hw/net/npcm7xx_emc.c | 18 +++++------ hw/virtio/virtio-iommu-pci.c | 12 ++------ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++------------ linux-user/hexagon/cpu_loop.c | 1 + target/arm/debug_helper.c | 23 ++++++++++++++ target/arm/gdbstub.c | 9 ++++-- target/arm/helper.c | 6 ++-- target/arm/machine.c | 10 ++++++ target/arm/tlb_helper.c | 63 ++++++++++++++++++++++++++++---------- target/arm/translate-a64.c | 23 ++++++++++++-- target/arm/translate.c | 58 ++++++++++++++++++++++++++--------- target/i386/tcg/translate.c | 12 ++------ tests/qtest/bios-tables-test.c | 38 +++++++++++++++++++++++ tests/tcg/aarch64/pcalign-a64.c | 37 ++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/intc/Kconfig | 5 +++ hw/intc/meson.build | 11 ++++--- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 44 files changed, 429 insertions(+), 145 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT From: Alex Bennée <alex.bennee@linaro.org> While trying to debug a GIC ITS failure I saw some guest errors that had poor formatting as well as leaving me confused as to what failed. As most of the checks aren't possible without a valid dte split that check apart and then check the other conditions in steps. This avoids us relying on undefined data. I still get a failure with the current kvm-unit-tests but at least I know (partially) why now: Exception return from AArch64 EL1 to AArch64 EL1 PC 0x40080588 PASS: gicv3: its-trigger: inv/invall: dev2/eventid=20 now triggers an LPI ITS: MAPD devid=2 size = 0x8 itt=0x40430000 valid=0 INT dev_id=2 event_id=20 process_its_cmd: invalid command attributes: invalid dte: 0 for 2 (MEM_TX: 0) PASS: gicv3: its-trigger: mapd valid=false: no LPI after device unmap SUMMARY: 6 tests, 1 unexpected failures Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211112170454.3158925-1-alex.bennee@linaro.org Cc: Shashi Mallela <shashi.mallela@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_its.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, if (res != MEMTX_OK) { return result; } + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "invalid dte: %"PRIx64" for %d (MEM_TX: %d)\n", + __func__, dte, devid, res); + return result; } - if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid || - !cte_valid || (eventid > max_eventid)) { + + /* + * In this implementation, in case of guest errors we ignore the + * command and move onto the next command in the queue. + */ + if (devid > s->dt.maxids.max_devids) { qemu_log_mask(LOG_GUEST_ERROR, - "%s: invalid command attributes " - "devid %d or eventid %d or invalid dte %d or" - "invalid cte %d or invalid ite %d\n", - __func__, devid, eventid, dte_valid, cte_valid, - ite_valid); - /* - * in this implementation, in case of error - * we ignore this command and move onto the next - * command in the queue - */ + "%s: invalid command attributes: devid %d>%d", + __func__, devid, s->dt.maxids.max_devids); + + } else if (!dte_valid || !ite_valid || !cte_valid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "dte: %s, ite: %s, cte: %s\n", + __func__, + dte_valid ? "valid" : "invalid", + ite_valid ? "valid" : "invalid", + cte_valid ? "valid" : "invalid"); + } else if (eventid > max_eventid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: eventid %d > %d\n", + __func__, eventid, max_eventid); } else { /* * Current implementation only supports rdbase == procnum -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Add X11, FP5280G2, G220A, Rainier and Fuji. Mention that Swift will be removed in v7.0. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20211117065752.330632-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ AST2400 SoC based machines : - ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC - ``quanta-q71l-bmc`` OpenBMC Quanta BMC +- ``supermicrox11-bmc`` Supermicro X11 BMC AST2500 SoC based machines : @@ -XXX,XX +XXX,XX @@ AST2500 SoC based machines : - ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC - ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC - ``sonorapass-bmc`` OCP SonoraPass BMC -- ``swift-bmc`` OpenPOWER Swift BMC POWER9 +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 (to be removed in v7.0) +- ``fp5280g2-bmc`` Inspur FP5280G2 BMC +- ``g220a-bmc`` Bytedance G220A BMC AST2600 SoC based machines : - ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex-A7) - ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC +- ``rainier-bmc`` IBM Rainier POWER10 BMC +- ``fuji-bmc`` Facebook Fuji BMC Supported devices ----------------- -- 2.25.1 From: Joel Stanley <joel@jms.id.au> This is the latest URL for the OpenBMC CI. The old URL still works, but redirects. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ The Aspeed machines can be started using the ``-kernel`` option to load a Linux kernel or from a firmware. Images can be downloaded from the OpenBMC jenkins : - https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/distro=ubuntu,label=docker-builder + https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ or directly from the OpenBMC GitHub release repository : -- 2.25.1 From: Joel Stanley <joel@jms.id.au> A common use case for the ASPEED machine is to boot a Linux kernel. Provide a full example command line. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Missing devices Boot options ------------ -The Aspeed machines can be started using the ``-kernel`` option to -load a Linux kernel or from a firmware. Images can be downloaded from -the OpenBMC jenkins : +The Aspeed machines can be started using the ``-kernel`` and ``-dtb`` options +to load a Linux kernel or from a firmware. Images can be downloaded from the +OpenBMC jenkins : https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ @@ -XXX,XX +XXX,XX @@ or directly from the OpenBMC GitHub release repository : https://github.com/openbmc/openbmc/releases +To boot a kernel directly from a Linux build tree: + +.. code-block:: bash + + $ qemu-system-arm -M ast2600-evb -nographic \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/aspeed-ast2600-evb.dtb \ + -initrd rootfs.cpio + The image should be attached as an MTD drive. Run : .. code-block:: bash -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Move it to the supported list. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Front LEDs (PCA9552 on I2C bus) * LPC Peripheral Controller (a subset of subdevices are supported) * Hash/Crypto Engine (HACE) - Hash support only. TODO: HMAC and RSA + * ADC Missing devices --------------- * Coprocessor support - * ADC (out of tree implementation) * PWM and Fan Controller * Slave GPIO Controller * Super I/O Controller -- 2.25.1 From: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Fix issue where the data register may be overwritten by next character reception before being read and returned. Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211128120723.4053-1-olivier.heriveaux@ledger.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32f2xx_usart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32f2xx_usart.c +++ b/hw/char/stm32f2xx_usart.c @@ -XXX,XX +XXX,XX @@ static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr, return retvalue; case USART_DR: DB_PRINT("Value: 0x%" PRIx32 ", %c\n", s->usart_dr, (char) s->usart_dr); + retvalue = s->usart_dr & 0x3FF; s->usart_sr &= ~USART_SR_RXNE; qemu_chr_fe_accept_input(&s->chr); qemu_set_irq(s->irq, 0); - return s->usart_dr & 0x3FF; + return retvalue; case USART_BRR: return s->usart_brr; case USART_CR1: -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> gicv3_set_gicv3state() is used by arm_gicv3_common.c in arm_gicv3_common_realize(). Since we want to restrict arm_gicv3_cpuif.c to TCG, extract gicv3_set_gicv3state() to a new file. Add this file to the meson 'specific' source set, since it needs access to "cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 10 +--------- hw/intc/arm_gicv3_cpuif_common.c | 22 ++++++++++++++++++++++ hw/intc/meson.build | 1 + 3 files changed, 24 insertions(+), 9 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2016 Linaro Limited * Written by Peter Maydell @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" -void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) -{ - ARMCPU *arm_cpu = ARM_CPU(cpu); - CPUARMState *env = &arm_cpu->env; - - env->gicv3state = (void *)s; -}; - static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { return env->gicv3state; diff --git a/hw/intc/arm_gicv3_cpuif_common.c b/hw/intc/arm_gicv3_cpuif_common.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/intc/arm_gicv3_cpuif_common.c @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * ARM Generic Interrupt Controller v3 + * + * Copyright (c) 2016 Linaro Limited + * Written by Peter Maydell + * + * This code is licensed under the GPL, version 2 or (at your option) + * any later version. + */ + +#include "qemu/osdep.h" +#include "gicv3_internal.h" +#include "cpu.h" + +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The TYPE_ARM_GICV3 device is an emulated one. When using KVM, it is recommended to use the TYPE_KVM_ARM_GICV3 device (which uses in-kernel support). When using --with-devices-FOO, it is possible to build a binary with a specific set of devices. When this binary is restricted to KVM accelerator, the TYPE_ARM_GICV3 device is irrelevant, and it is desirable to remove it from the binary. Therefore introduce the CONFIG_ARM_GIC_TCG Kconfig selector which select the files required to have the TYPE_ARM_GICV3 device, but also allowing to de-select this device. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3.c | 2 +- hw/intc/Kconfig | 5 +++++ hw/intc/meson.build | 10 ++++++---- 3 files changed, 12 insertions(+), 5 deletions(-) diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2015 Huawei. * Copyright (c) 2016 Linaro Limited diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config APIC select MSI_NONBROKEN select I8259 +config ARM_GIC_TCG + bool + default y + depends on ARM_GIC && TCG + config ARM_GIC_KVM bool default y diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files( 'arm_gic.c', 'arm_gic_common.c', 'arm_gicv2m.c', - 'arm_gicv3.c', 'arm_gicv3_common.c', - 'arm_gicv3_dist.c', 'arm_gicv3_its_common.c', - 'arm_gicv3_redist.c', +)) +softmmu_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files( + 'arm_gicv3.c', + 'arm_gicv3_dist.c', 'arm_gicv3_its.c', + 'arm_gicv3_redist.c', )) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c')) softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) -specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) specific_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *s = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint64_t pc = s->base.pc_next; uint32_t insn; if (s->ss_active && !s->pstate_ss) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } - s->pc_curr = s->base.pc_next; - insn = arm_ldl_code(env, &s->base, s->base.pc_next, s->sctlr_b); + s->pc_curr = pc; + insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; - s->base.pc_next += 4; + s->base.pc_next = pc + 4; s->fp_access_checked = false; s->sve_access_checked = false; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; unsigned int insn; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_ldl_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_ldl_code(env, &dc->base, pc, dc->sctlr_b); dc->insn = insn; - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; disas_arm_insn(dc, insn); arm_post_translate_insn(dc); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; uint32_t insn; bool is_16bit; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 2; + dc->base.pc_next = pc + 2; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_lduw_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); is_16bit = thumb_insn_is_16bit(dc, dc->base.pc_next, insn); - dc->base.pc_next += 2; + pc += 2; if (!is_16bit) { - uint32_t insn2 = arm_lduw_code(env, &dc->base, dc->base.pc_next, - dc->sctlr_b); - + uint32_t insn2 = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); insn = insn << 16 | insn2; - dc->base.pc_next += 2; + pc += 2; } + dc->base.pc_next = pc; dc->insn = insn; if (dc->pstate_il) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create arm_check_ss_active and arm_check_kernelpage. Reverse the order of the tests. While it doesn't matter in practice, because only user-only has a kernel page and user-only never sets ss_active, ss_active has priority over execution exceptions and it is best to keep them in the proper order. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_insn_start(DisasContextBase *dcbase, CPUState *cpu) dc->insn_start = tcg_last_op(); } -static bool arm_pre_translate_insn(DisasContext *dc) +static bool arm_check_kernelpage(DisasContext *dc) { #ifdef CONFIG_USER_ONLY /* Intercept jump to the magic kernel page. */ @@ -XXX,XX +XXX,XX @@ static bool arm_pre_translate_insn(DisasContext *dc) return true; } #endif + return false; +} +static bool arm_check_ss_active(DisasContext *dc) +{ if (dc->ss_active && !dc->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The size of the code covered by a TranslationBlock cannot be 0; this is checked via assert in tb_gen_code. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) assert(s->base.num_insns == 1); gen_swstep_exception(s, 0, 0); s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We will reuse this section of arm_deliver_fault for raising pc alignment faults. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tlb_helper.c | 45 +++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 17 deletions(-) diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, return syn; } -static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, - MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) +static uint32_t compute_fsr_fsc(CPUARMState *env, ARMMMUFaultInfo *fi, + int target_el, int mmu_idx, uint32_t *ret_fsc) { - CPUARMState *env = &cpu->env; - int target_el; - bool same_el; - uint32_t syn, exc, fsr, fsc; ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); - - target_el = exception_target_el(env); - if (fi->stage2) { - target_el = 2; - env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; - if (arm_is_secure_below_el3(env) && fi->s1ns) { - env->cp15.hpfar_el2 |= HPFAR_NS; - } - } - same_el = (arm_current_el(env) == target_el); + uint32_t fsr, fsc; if (target_el == 2 || arm_el_is_aa64(env, target_el) || arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { @@ -XXX,XX +XXX,XX @@ static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, fsc = 0x3f; } + *ret_fsc = fsc; + return fsr; +} + +static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, + MMUAccessType access_type, + int mmu_idx, ARMMMUFaultInfo *fi) +{ + CPUARMState *env = &cpu->env; + int target_el; + bool same_el; + uint32_t syn, exc, fsr, fsc; + + target_el = exception_target_el(env); + if (fi->stage2) { + target_el = 2; + env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; + if (arm_is_secure_below_el3(env) && fi->s1ns) { + env->cp15.hpfar_el2 |= HPFAR_NS; + } + } + same_el = (arm_current_el(env) == target_el); + + fsr = compute_fsr_fsc(env, fi, target_el, mmu_idx, &fsc); + if (access_type == MMU_INST_FETCH) { syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); exc = EXCP_PREFETCH_ABORT; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> For A64, any input to an indirect branch can cause this. For A32, many indirect branch paths force the branch to be aligned, but BXWritePC does not. This includes the BX instruction but also other interworking changes to PC. Prior to v8, this case is UNDEFINED. With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an exception or force align the PC. We choose to raise an exception because we have the infrastructure, it makes the generated code for gen_bx simpler, and it has the possibility of catching more guest bugs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/syndrome.h | 5 ++++ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++++++--------------- target/arm/tlb_helper.c | 18 ++++++++++++++ target/arm/translate-a64.c | 15 ++++++++++++ target/arm/translate.c | 22 ++++++++++++++++- 6 files changed, 87 insertions(+), 20 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, DEF_HELPER_2(exception_internal, void, env, i32) DEF_HELPER_4(exception_with_syndrome, void, env, i32, i32, i32) DEF_HELPER_2(exception_bkpt_insn, void, env, i32) +DEF_HELPER_2(exception_pc_alignment, noreturn, env, tl) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_illegalstate(void) return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_pcalignment(void) +{ + return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* We should only arrive here with EC in {DATAABORT, INSNABORT}. */ ec = syn_get_ec(env->exception.syndrome); - assert(ec == EC_DATAABORT || ec == EC_INSNABORT); - - /* Both EC have the same format for FSC, or close enough. */ - fsc = extract32(env->exception.syndrome, 0, 6); - switch (fsc) { - case 0x04 ... 0x07: /* Translation fault, level {0-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MAPERR; + switch (ec) { + case EC_DATAABORT: + case EC_INSNABORT: + /* Both EC have the same format for FSC, or close enough. */ + fsc = extract32(env->exception.syndrome, 0, 6); + switch (fsc) { + case 0x04 ... 0x07: /* Translation fault, level {0-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MAPERR; + break; + case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ + case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_ACCERR; + break; + case 0x11: /* Synchronous Tag Check Fault */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MTESERR; + break; + case 0x21: /* Alignment fault */ + si_signo = TARGET_SIGBUS; + si_code = TARGET_BUS_ADRALN; + break; + default: + g_assert_not_reached(); + } break; - case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ - case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_ACCERR; - break; - case 0x11: /* Synchronous Tag Check Fault */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MTESERR; - break; - case 0x21: /* Alignment fault */ + case EC_PCALIGNMENT: si_signo = TARGET_SIGBUS; si_code = TARGET_BUS_ADRALN; break; diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "internals.h" #include "exec/exec-all.h" +#include "exec/helper-proto.h" static inline uint32_t merge_syn_data_abort(uint32_t template_syn, unsigned int target_el, @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); } +void helper_exception_pc_alignment(CPUARMState *env, target_ulong pc) +{ + ARMMMUFaultInfo fi = { .type = ARMFault_Alignment }; + int target_el = exception_target_el(env); + int mmu_idx = cpu_mmu_index(env, true); + uint32_t fsc; + + env->exception.vaddress = pc; + + /* + * Note that the fsc is not applicable to this exception, + * since any syndrome is pcalignment not insn_abort. + */ + env->exception.fsr = compute_fsr_fsc(env, &fi, target_el, mmu_idx, &fsc); + raise_exception(env, EXCP_PREFETCH_ABORT, syn_pcalignment(), target_el); +} + #if !defined(CONFIG_USER_ONLY) /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint64_t pc = s->base.pc_next; uint32_t insn; + /* Singlestep exceptions have the highest priority. */ if (s->ss_active && !s->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code. + * This should only be possible after an indirect branch, at the + * start of the TB. + */ + assert(s->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + s->pc_curr = pc; insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { + /* Singlestep exceptions have the highest priority. */ + if (arm_check_ss_active(dc)) { + dc->base.pc_next = pc + 4; + return; + } + + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code + * (or the execution of the kernelpage entrypoint). This should only + * be possible after an indirect branch, at the start of the TB. + */ + assert(dc->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + dc->base.is_jmp = DISAS_NORETURN; + dc->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + + if (arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Misaligned thumb PC is architecturally impossible. Assert is better than proceeding, in case we've missed something somewhere. Expand a comment about aligning the pc in gdbstub. Fail an incoming migrate if a thumb pc is misaligned. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gdbstub.c | 9 +++++++-- target/arm/machine.c | 10 ++++++++++ target/arm/translate.c | 3 +++ 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n) tmp = ldl_p(mem_buf); - /* Mask out low bit of PC to workaround gdb bugs. This will probably - cause problems if we ever implement the Jazelle DBX extensions. */ + /* + * Mask out low bits of PC to workaround gdb bugs. + * This avoids an assert in thumb_tr_translate_insn, because it is + * architecturally impossible to misalign the pc. + * This will probably cause problems if we ever implement the + * Jazelle DBX extensions. + */ if (n == 15) { tmp &= ~1; } diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) return -1; } } + + /* + * Misaligned thumb pc is architecturally impossible. + * We have an assert in thumb_tr_translate_insn to verify this. + * Fail an incoming migrate to avoid this assert. + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; + /* Misaligned thumb PC is architecturally impossible. */ + assert((dc->base.pc_next & 1) == 0); + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Both single-step and pc alignment faults have priority over breakpoint exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; + target_ulong pc; int n; /* @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) return false; } + /* + * Single-step exceptions have priority over breakpoint exceptions. + * If single-step state is active-pending, suppress the bp. + */ + if (arm_singlestep_active(env) && !(env->pstate & PSTATE_SS)) { + return false; + } + + /* + * PC alignment faults have priority over breakpoint exceptions. + */ + pc = is_a64(env) ? env->pc : env->regs[15]; + if ((is_a64(env) || !env->thumb) && (pc & 3) != 0) { + return false; + } + + /* + * Instruction aborts have priority over breakpoint exceptions. + * TODO: We would need to look up the page for PC and verify that + * it is present and executable. + */ + for (n = 0; n < ARRAY_SIZE(env->cpu_breakpoint); n++) { if (bp_wp_matches(cpu, n, false)) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pcalign-a64.c | 37 +++++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 4 files changed, 89 insertions(+), 2 deletions(-) create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c diff --git a/tests/tcg/aarch64/pcalign-a64.c b/tests/tcg/aarch64/pcalign-a64.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/pcalign-a64.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 1\n\t" + "str %0, %1\n\t" + "br %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + abort(); +} diff --git a/tests/tcg/arm/pcalign-a32.c b/tests/tcg/arm/pcalign-a32.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/arm/pcalign-a32.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#ifdef __thumb__ +#error "This test must be compiled for ARM" +#endif + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 2\n\t" + "str %0, %1\n\t" + "bx %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + + /* + * From v8, it is CONSTRAINED UNPREDICTABLE whether BXWritePC aligns + * the address or not. If so, we can legitimately fall through. + */ + return EXIT_SUCCESS; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ VPATH += $(ARM_SRC) AARCH64_SRC=$(SRC_PATH)/tests/tcg/aarch64 VPATH += $(AARCH64_SRC) -# Float-convert Tests -AARCH64_TESTS=fcvt +# Base architecture tests +AARCH64_TESTS=fcvt pcalign-a64 fcvt: LDFLAGS+=-lm diff --git a/tests/tcg/arm/Makefile.target b/tests/tcg/arm/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/arm/Makefile.target +++ b/tests/tcg/arm/Makefile.target @@ -XXX,XX +XXX,XX @@ run-fcvt: fcvt $(call run-test,fcvt,$(QEMU) $<,"$< on $(TARGET_NAME)") $(call diff-out,fcvt,$(ARM_SRC)/fcvt.ref) +# PC alignment test +ARM_TESTS += pcalign-a32 +pcalign-a32: CFLAGS+=-marm + ifeq ($(CONFIG_ARM_COMPATIBLE_SEMIHOSTING),y) # Semihosting smoke test for linux-user -- 2.25.1 In the SSE decode function gen_sse(), we combine a byte 'b' and a value 'b1' which can be [0..3], and switch on them: b |= (b1 << 8); switch (b) { ... default: unknown_op: gen_unknown_opcode(env, s); return; } In three cases inside this switch, we were then also checking for "if (b1 >= 2) { goto unknown_op; }". However, this can never happen, because the 'case' values in each place are 0x0nn or 0x1nn and the switch will have directed the b1 == (2, 3) cases to the default already. This check was added in commit c045af25a52e9 in 2010; the added code was unnecessary then as well, and was apparently intended only to ensure that we never accidentally ended up indexing off the end of an sse_op_table with only 2 entries as a result of future bugs in the decode logic. Change the checks to assert() instead, and make sure they're always immediately before the array access they are protecting. Fixes: Coverity CID 1460207 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/i386/tcg/translate.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/translate.c +++ b/target/i386/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, case 0x171: /* shift xmm, im */ case 0x172: case 0x173: - if (b1 >= 2) { - goto unknown_op; - } val = x86_ldub_code(env, s); if (is_xmm) { tcg_gen_movi_tl(s->T0, val); @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, offsetof(CPUX86State, mmx_t0.MMX_L(1))); op1_offset = offsetof(CPUX86State,mmx_t0); } + assert(b1 < 2); sse_fn_epp = sse_op_table2[((b - 1) & 3) * 8 + (((modrm >> 3)) & 7)][b1]; if (!sse_fn_epp) { @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_epp = sse_op_table6[b].op[b1]; if (!sse_fn_epp) { goto unknown_op; @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_eppi = sse_op_table7[b].op[b1]; if (!sse_fn_eppi) { goto unknown_op; -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). include/hw/i386/x86.h and include/hw/i386/microvm.h break this rule. In fact, the include is not required at all, so we can just drop it from both files. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211129200510.1233037-2-peter.maydell@linaro.org --- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - 2 files changed, 2 deletions(-) diff --git a/include/hw/i386/microvm.h b/include/hw/i386/microvm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/microvm.h +++ b/include/hw/i386/microvm.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_MICROVM_H #define HW_I386_MICROVM_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" diff --git a/include/hw/i386/x86.h b/include/hw/i386/x86.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/x86.h +++ b/include/hw/i386/x86.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_X86_H #define HW_I386_X86_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Move the include to linux-user/hexagon/cpu_loop.c, which needs it for the declaration of cpu_exec_step_atomic(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-id: 20211129200510.1233037-3-peter.maydell@linaro.org --- target/hexagon/cpu.h | 1 - linux-user/hexagon/cpu_loop.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/target/hexagon/cpu.h b/target/hexagon/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.h +++ b/target/hexagon/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUHexagonState CPUHexagonState; #include "fpu/softfloat-types.h" -#include "qemu-common.h" #include "exec/cpu-defs.h" #include "hex_regs.h" #include "mmvec/mmvec.h" diff --git a/linux-user/hexagon/cpu_loop.c b/linux-user/hexagon/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hexagon/cpu_loop.c +++ b/linux-user/hexagon/cpu_loop.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu-common.h" #include "qemu.h" #include "user-internals.h" #include "cpu_loop-common.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Nothing actually relies on target/rx/cpu.h including it, so we can just drop the include. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-4-peter.maydell@linaro.org --- target/rx/cpu.h | 1 - 1 file changed, 1 deletion(-) diff --git a/target/rx/cpu.h b/target/rx/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.h +++ b/target/rx/cpu.h @@ -XXX,XX +XXX,XX @@ #define RX_CPU_H #include "qemu/bitops.h" -#include "qemu-common.h" #include "hw/registerfields.h" #include "cpu-qom.h" -- 2.25.1 A lot of C files in hw/arm include qemu-common.h when they don't need anything from it. Drop the include lines. omap1.c, pxa2xx.c and strongarm.c retain the include because they use it for the prototype of qemu_get_timedate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org --- hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt.c | 1 - 8 files changed, 8 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/error-report.h" #include "qapi/error.h" diff --git a/hw/arm/digic_boards.c b/hw/arm/digic_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/digic_boards.c +++ b/hw/arm/digic_boards.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "hw/boards.h" #include "qemu/error-report.h" diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "hw/sysbus.h" diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-core.h" #include "hw/qdev-properties.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "sysemu/blockdev.h" diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "qemu/error-report.h" diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" #include "hw/arm/stm32f405_soc.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "cpu.h" #include "hw/sysbus.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "qemu/option.h" -- 2.25.1 The calculation of the length of TLB range invalidate operations in tlbi_aa64_range_get_length() is incorrect in two ways: * the NUM field is 5 bits, but we read only 4 bits * we miscalculate the page_shift value, because of an off-by-one error: TG 0b00 is invalid TG 0b01 is 4K granule size == 4096 == 2^12 TG 0b10 is 16K granule size == 16384 == 2^14 TG 0b11 is 64K granule size == 65536 == 2^16 so page_shift should be (TG - 1) * 2 + 12 Thanks to the bug report submitter Cha HyunSoo for identifying both these errors. Fixes: 84940ed82552d3c ("target/arm: Add support for FEAT_TLBIRANGE") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/734 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211130173257.1274194-1-peter.maydell@linaro.org --- target/arm/helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t tlbi_aa64_range_get_length(CPUARMState *env, uint64_t exponent; uint64_t length; - num = extract64(value, 39, 4); + num = extract64(value, 39, 5); scale = extract64(value, 44, 2); page_size_granule = extract64(value, 46, 2); - page_shift = page_size_granule * 2 + 12; - if (page_size_granule == 0) { qemu_log_mask(LOG_GUEST_ERROR, "Invalid page size granule %d\n", page_size_granule); return 0; } + page_shift = (page_size_granule - 1) * 2 + 12; + exponent = (5 * scale) + 1; length = (num + 1) << (exponent + page_shift); -- 2.25.1 From: Patrick Venture <venture@google.com> The rx_active boolean change to true should always trigger a try_read call that flushes the queue. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211203221002.1719306-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/npcm7xx_emc.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/hw/net/npcm7xx_emc.c b/hw/net/npcm7xx_emc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/npcm7xx_emc.c +++ b/hw/net/npcm7xx_emc.c @@ -XXX,XX +XXX,XX @@ static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag) emc_set_mista(emc, mista_flag); } +static void emc_enable_rx_and_flush(NPCM7xxEMCState *emc) +{ + emc->rx_active = true; + qemu_flush_queued_packets(qemu_get_queue(emc->nic)); +} + static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc, const NPCM7xxEMCTxDesc *tx_desc, uint32_t desc_addr) @@ -XXX,XX +XXX,XX @@ static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1) return len; } -static void emc_try_receive_next_packet(NPCM7xxEMCState *emc) -{ - if (emc_can_receive(qemu_get_queue(emc->nic))) { - qemu_flush_queued_packets(qemu_get_queue(emc->nic)); - } -} - static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size) { NPCM7xxEMCState *emc = opaque; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA; } if (value & REG_MCMDR_RXON) { - emc->rx_active = true; + emc_enable_rx_and_flush(emc); } else { emc_halt_rx(emc, 0); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, break; case REG_RSDR: if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) { - emc->rx_active = true; - emc_try_receive_next_packet(emc); + emc_enable_rx_and_flush(emc); } break; case REG_MIIDA: -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> When a virtio-iommu is instantiated, describe it using the ACPI VIOT table. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 7 +++++++ hw/arm/Kconfig | 1 + 2 files changed, 8 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #include "kvm_arm.h" #include "migration/vmstate.h" #include "hw/acpi/ghes.h" +#include "hw/acpi/viot.h" #define ARM_SPI_BASE 32 @@ -XXX,XX +XXX,XX @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) } #endif + if (vms->iommu == VIRT_IOMMU_VIRTIO) { + acpi_add_table(table_offsets, tables_blob); + build_viot(ms, tables_blob, tables->linker, vms->virtio_iommu_bdf, + vms->oem_id, vms->oem_table_id); + } + /* XSDT is pointed to by RSDP */ xsdt = tables_blob->len; build_xsdt(tables_blob, tables->linker, table_offsets, vms->oem_id, diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select DIMM select ACPI_HW_REDUCED select ACPI_APEI + select ACPI_VIOT config CHEETAH bool -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> virtio-iommu is now supported with ACPI VIOT as well as device tree. Remove the restriction that prevents from instantiating a virtio-iommu device under ACPI. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 10 ++-------- hw/virtio/virtio-iommu-pci.c | 12 ++---------- 2 files changed, 4 insertions(+), 18 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, MachineClass *mc = MACHINE_GET_CLASS(machine); if (device_is_dynamic_sysbus(mc, dev) || - (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM))) { + object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || + object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { return HOTPLUG_HANDLER(machine); } - if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { - VirtMachineState *vms = VIRT_MACHINE(machine); - - if (!vms->bootinfo.firmware_loaded || !virt_is_acpi_enabled(vms)) { - return HOTPLUG_HANDLER(machine); - } - } return NULL; } diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu-pci.c +++ b/hw/virtio/virtio-iommu-pci.c @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); if (!qdev_get_machine_hotplug_handler(DEVICE(vpci_dev))) { - MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); - - error_setg(errp, - "%s machine fails to create iommu-map device tree bindings", - mc->name); - error_append_hint(errp, - "Check your machine implements a hotplug handler " - "for the virtio-iommu-pci device\n"); - error_append_hint(errp, "Check the guest is booted without FW or with " - "-no-acpi\n"); + error_setg(errp, "Check your machine implements a hotplug handler " + "for the virtio-iommu-pci device"); return; } for (int i = 0; i < s->nb_reserved_regions; i++) { -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> We do not support instantiating multiple IOMMUs. Before adding a virtio-iommu, check that no other IOMMU is present. This will detect both "iommu=smmuv3" machine parameter and another virtio-iommu instance. Fixes: 70e89132c9 ("hw/arm/virt: Add the virtio-iommu device tree mappings") Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-4-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, hwaddr db_start = 0, db_end = 0; char *resv_prop_str; + if (vms->iommu != VIRT_IOMMU_NONE) { + error_setg(errp, "virt machine does not support multiple IOMMUs"); + return; + } + switch (vms->msi_controller) { case VIRT_MSI_CTRL_NONE: return; -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> To propagate errors to the caller of the pre_plug callback, use the object_poperty_set*() functions directly instead of the qdev_prop_set*() helpers. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-5-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, db_start, db_end, VIRTIO_IOMMU_RESV_MEM_T_MSI); - qdev_prop_set_uint32(dev, "len-reserved-regions", 1); - qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str); + object_property_set_uint(OBJECT(dev), "len-reserved-regions", 1, errp); + object_property_set_str(OBJECT(dev), "reserved-regions[0]", + resv_prop_str, errp); g_free(resv_prop_str); } } -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Create empty data files and allow updates for the upcoming VIOT tests. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-6-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 +++ tests/data/acpi/q35/DSDT.viot | 0 tests/data/acpi/q35/VIOT.viot | 0 tests/data/acpi/virt/VIOT | 0 4 files changed, 3 insertions(+) create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,4 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/VIOT", +"tests/data/acpi/q35/DSDT.viot", +"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT new file mode 100644 index XXXXXXX..XXXXXXX -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add two test cases for VIOT, one on the q35 machine and the other on virt. To test complex topologies the q35 test has two PCIe buses that bypass the IOMMU (and are therefore not described by VIOT), and two buses that are translated by virtio-iommu. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-7-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -XXX,XX +XXX,XX @@ static void test_acpi_virt_tcg(void) free_test_data(&data); } +static void test_acpi_q35_viot(void) +{ + test_data data = { + .machine = MACHINE_Q35, + .variant = ".viot", + }; + + /* + * To keep things interesting, two buses bypass the IOMMU. + * VIOT should only describes the other two buses. + */ + test_acpi_one("-machine default_bus_bypass_iommu=on " + "-device virtio-iommu-pci " + "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 " + "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on " + "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0", + &data); + free_test_data(&data); +} + +static void test_acpi_virt_viot(void) +{ + test_data data = { + .machine = "virt", + .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd", + .uefi_fl2 = "pc-bios/edk2-arm-vars.fd", + .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2", + .ram_start = 0x40000000ULL, + .scan_len = 128ULL * 1024 * 1024, + }; + + test_acpi_one("-cpu cortex-a57 " + "-device virtio-iommu-pci", &data); + free_test_data(&data); +} + static void test_oem_fields(test_data *data) { int i; @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/q35/kvm/xapic", test_acpi_q35_kvm_xapic); qtest_add_func("acpi/q35/kvm/dmar", test_acpi_q35_kvm_dmar); } + qtest_add_func("acpi/q35/viot", test_acpi_q35_viot); } else if (strcmp(arch, "aarch64") == 0) { if (has_tcg) { qtest_add_func("acpi/virt", test_acpi_virt_tcg); @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp); qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb); qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt); + qtest_add_func("acpi/virt/viot", test_acpi_virt_viot); } } ret = g_test_run(); -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add expected blobs of the VIOT and DSDT table for the VIOT test on the q35 machine. Since the test instantiates a virtio device and two PCIe expander bridges, DSDT.viot has more blocks than the base DSDT. The VIOT table generated for the q35 test is: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000070 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 3D [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0003 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0010 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00003000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 3000 [04Eh 0078 2] PCI BDF end : 30FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 [058h 0088 1] Type : 01 [PCI Range] [059h 0089 1] Reserved : 00 [05Ah 0090 2] Length : 0018 [05Ch 0092 4] Endpoint start : 00001000 [060h 0096 2] PCI Segment start : 0000 [062h 0098 2] PCI Segment end : 0000 [064h 0100 2] PCI BDF start : 1000 [066h 0102 2] PCI BDF end : 10FF [068h 0104 2] Output node : 0030 [06Ah 0106 6] Reserved : 000000000000 And the DSDT diff is: @@ -XXX,XX +XXX,XX @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/q35/DSDT, Fri Dec 10 15:03:08 2021 + * Disassembly of /tmp/aml-H9Y5D1, Fri Dec 10 15:02:27 2021 * * Original Table Header: * Signature "DSDT" - * Length 0x00002061 (8289) + * Length 0x000024B6 (9398) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0xFA + * Checksum 0xA7 * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) @@ -XXX,XX +XXX,XX @@ } } + Scope (\_SB) + { + Device (PC30) + { + Name (_UID, 0x30) // _UID: Unique ID + Name (_BBN, 0x30) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC30._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0030, // Range Minimum + 0x0030, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC20) + { + Name (_UID, 0x20) // _UID: Unique ID + Name (_BBN, 0x20) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC20._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0020, // Range Minimum + 0x0020, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC10) + { + Name (_UID, 0x10) // _UID: Unique ID + Name (_BBN, 0x10) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC10._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0010, // Range Minimum + 0x0010, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + Scope (\_SB.PCI0) { Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings @@ -XXX,XX +XXX,XX @@ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum - 0x00FF, // Range Maximum + 0x000F, // Range Maximum 0x0000, // Translation Offset - 0x0100, // Length + 0x0010, // Length ,, ) IO (Decode16, 0x0CF8, // Range Minimum @@ -XXX,XX +XXX,XX @@ } } + Device (S10) + { + Name (_ADR, 0x00020000) // _ADR: Address + } + + Device (S18) + { + Name (_ADR, 0x00030000) // _ADR: Address + } + + Device (S20) + { + Name (_ADR, 0x00040000) // _ADR: Address + } + + Device (S28) + { + Name (_ADR, 0x00050000) // _ADR: Address + } + Method (PCNT, 0, NotSerialized) { } Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-8-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -XXX,XX +XXX,XX @@ /* List of comma-separated changed AML files to ignore */ "tests/data/acpi/virt/VIOT", -"tests/data/acpi/q35/DSDT.viot", -"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 9398 zcmeHNO>7&-8J*>iv|O&FB}G~Oi$yp||57BBoWHhc5OS9yDTx$CQgH$r;8Idr*-4Q_ z5(9Az1F`}niVsB-)<KW7p`g9Br(A2Gm-gmc1N78GFS!;)e2V(MnH_0{q<{#yMgn&C zn|*J-d9yqFhO_H6z19~`FlPL*u<DkZ*}|)JH;X@mF-FI<cPg<fti9tEN*yB^i5czN zNq&q?!OZ;BE3B7{KWzJ-`Tn~f`9?Qj8~2^N8{Oc8J%57{==w%rS#;nOCp*nTr@iZ1 zb+?i;JLQUJ=O0?8*>S~D)a>NF1~WVB6^~_B#yhJ`H+JU@=6aXs`?Yv)J2h=N?drcS zeLZ*n<<Bm^n}6`jfBx#u8&(W}1?)}iF9o#mZ~E2+zwdn7yK3AbIzKnxpZ>JRPm3~# z&ICS{+_OayRW-l=Mtk=~uaS3o8z<_udd|(wqg`&JnVPfCe>BUOO`Su3e>pff_^UW% z&JE^NO`)=Amg~iqRB1pPscP?(>#ZuY8GHCmlEvD$9g3%4Db~Dfz2SATnddvrR-Oe^ z;s;dJec!hnzi)ri^I6YN9vtkm{^TdUF8h7gX8-<Qe4p)GQ=)AtYx2VcwdLVAEXEjG z^Mj|UHPqkj-LsWuzQem1>F3atdZn=zv3$#RmZzSHN+6-yyU#8cJb=YDilX&sl}vNm znkgAR^O<3kj4if>{ly5fwRfMWuC5=lrlvKPX~i#654Cp}R_d*JS$9laZ$ra6)<ns8 zFZy28G%xP(nit&F>LDi%G<tIc=TY=gl$jSD&Uv!Yat~XR46h%rI$!}a%!|xG7u8Zn zeY8_|n=K>xz_v_W8VX$W-Fg-qFWcT}7MCyz{%%{ia7hZ>Law-k6NOr}VI&_48U=2l zwqDKFE8eTwwozDdms#e?x?5a|v>&JF;2_v0L~z5n%BYU^52<*cWuD4|GYUm@1+?)) zte^45>Rz)t*<T5V#={r>@t@{%?^i#W{i=HAZ*Dc9y59Va-+#P!jrGs;u38a{fLr`N zvT@rUu>DljxJ?^&Z?-?vyJn3C>3D=qux{Y*bs5|5n)Qmi$TD^Zdn4GU$ocJS2Hh-< z`xPI^^+v0nUVdjMos8k`WGl7hA`{03ju%<lrgAHSpd^DRf-*}_#Ly0mB!LSfVgWcQ z&T$@~G9)JI=hz5m0vkrel+Xy{Oh7pkAu-V!j*W7rY(bO}Q$nMH2`FbGB&N)QaV4<4 zo)~9JXiP9=;}NPl<C@MmXG&;XFlFNrsyfFsonxFSp<}vEgsRSQP3O3#b6nSnP}ON_ zI!#Tdsp~|j>ckUB>FI=~GokB5sOq#dotCE4(sd$KbtW~PNlj-`*NIToiD#j5J#9^= zt?NXn>YUJYPG~wObe#xQos*i*NloXZt`niEb4t@WrRki~bs|)CI+{*L)9L6s5vn>< zn$DD_Go|Z9sOn5>I@6lYw5}7Os&iV?Ij!lO)^#FOb!If38BJ$K*NIToIiu;E(R9w} zIuWWmPiZ<&X*y5oIuWWmF_XaEC!a&Jn$B5WCqh-{X-(&8P3LJ{Cqh-{8P3dyPr@^t zSqL9?X9Uwd3W@23*s~h*tj0X6GZCuHa~kuU#yqDp5vt7d8uPryJg+kms?5hU=3^T3 zF`bD}WnSP+=`t5MQ$FJ_2&Q~+BP6E0f^%BVIW6a$o)e+SX~IDBih-7z6{O~7YTy`& zLjy&Cv?7QikV#>n0>>@MV8oK`Gmun34-FKdlm-J8SZSaNlnhir4-FI{S|bfqV8e)V zss<{chX#reE#g=hsKAC%sF6d-Km}BWs!kZFsFpKfpbC@>6rprQGEjt4Ck#|zITHq| zK*>M_l;<P^MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=xY&!axO< zGhv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEjt4Ck#|zITHq|K*>M_lrzad5lWpf zP=V!47^ngz0~JutBm+e#b;3XemNQ|X3X}{~Ksl2P6rt1!0~J`#gn=qhGEf2KOfpb} zQYQ>lU^x>8szAv=1(Y+%KoLrvFi?TzOc<yFB?A>u&LjgxD0RX>1(q{mpbC@>R6seC z3>2Z%2?G^a&V+#~P%=;f<xDbAgi<FARA4z12C6{GKn0XD$v_cGoiI>=<xCi;0wn_# zP|hR+MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=rz^3{+q_69%e4 z$v_2^Gs!>^N}VuJf#pmXr~)Me6;RG314Srx!axxz28u{EP=u<1B2)}iVZuNaCK;&0 zBm-5LFi?dF167!0pbC==RAItE6($T+VUmF=Ofpb~2?JG_Fi?d_2C6X0Kouqo6p_5T zFi=FeV!SiSKoR0H$dH(_Z(*Q_WZ%L-5y`$K14StNmJAdjmWs}HV4<vU_xO+1efmLq zZ;W>N_U)fP6Qy6Nw5mbt9Y(#emWSi66=>tq#xoh#Ue=0qyhxi8ZOUe5y0V7VfPUhp zwX=;ymc+i5%sg9Ja~lZ&8oAV@mHc>&CHP9v4R(jhtT?un;O4e9#pno)Xkh7OWgK&a zyj=3Iv0OuoK_;5rOr5f(Kb~ZXDBO+V`OWYo#_C08imwChQxnjdd?wZLDou8aj;$SD zGDYiA3<$Tu<JnHL(KPOChi#zrR32t83}naR$+ym4P_h?z_5#|cW-nw$XD_sOtE62l zrD3@*)NVyiklt0&yF9%+klsBey&I<Y2E<!f(E8TuJte)z(|ZHyy<^gQVfx}=`q&B5 z7nSryp1wGczIaUfVwiq$Fn#<4=@*ssi#+|}K>EdF(l3VTOM~ghPLRH&q%ZOGrGfON zW73zx^yR_y<0nX8R??Sw`tm^f@-gYlNFSp|*<gA{q?Zp5Oe-+l#rmyYmKozi9y=P> zVReJU*h=ZuVXiS$ohTbw-O#v9>(yZbGE|)?8(H1ZIKvV!jWa0>vy!3eMA^vdhQ>`s zuMSg{q3T50$m)j1!HixV<}X9liL#N^4c*tL^y)CF8LCc{jjV3yKAqL8!%SzWI#H%q z=bSrQ&)%JCRttF5g4Zf`6l?y@>PzD7MA^D>wBlcH6r1ucwJ<p0O%rZ?JzIY3-QdmZ zzs|n>`a5r3e|z)wcUaqS>nqFQ-8x}eCF4u`OWUxqst-@1rSmUs%WmKP5e0dcb?e2N z;Z|x*!);VwF|Yuhqs^khqOM!@u*jY!WYldISF(V6`BoNd&6Qfk3>X#SuD^7J>p_D= zBPa51y^_n#=cpOt#Zf$ya$Ae9Mfz56n|<i!a=ELS@)%a{^NIH3SDuN<R~sah1km#P zU@?*f%<rG=4W1wgfi;C?_n|W@%lm$&8YfvNOJodIg&IcIpIJQRHr<+ej11GQ6)&eF z2Lam*jIH}#y0>KnY%4JQfOYS$*uU%f#@$U6`N8I3N-lV?5ErFCdv~xDmu2(wexld4 z4v^;aVAT2k6GJ^m*FD(Wqc(Qg^)6a<?}h$zLoj}4;PP!+(O{@!a1y-hoAhF_7!z+6 zslpAmNtYbjHrw-~#SPVk_FUf>-Obg6yV`8o$8_`PyJe_;bY5_EMBfBfWU!Q=*9HsG z%_Cda{@_Krr!oHVhv9+y+T5qR8zZ2aZ>5r!$*|f$^U%yBUYfR&B!+EYy_PwL!BeUi zJH^}r3r9Q+B)X@Z)fk=P13w&7x#wBtXTZ)g>WITPg5r&pQc!nmyrmk#S(>>b9xnNr zx_b#v9Xv-Y><Wb%?S^0Xe&<)bbKl_=Z|3C$tf|F<bYzE*mfHB;uC)`q-?buaBe?l? zcLTpK*k<49Z32`K?|nSBMFqxTK^_IE-li2fEGdK~(ZdoKBl6ab4a;Hler#`xvEXJG zb?<E%EZExfX>jcOVhS*0rS~RS1dA#xhkv@Nct@#q?LyeKS<$uFec!bw>{@uu$gZ6a zyVen1i{1BKd%~`D7|m$;U0a<I*3I7%^N%N%lGYdU_GS!gaR8T$NA@GzFi~z`l7hdl zarZy6590|88pi(1zq;V(>38zM0sT&<zX;R5$1w3;`_JMG`;&I&0Y23DMx1%@(w(R9 z4M$j;D5J+Gy%fijRQsctzFKf&cv|BAz#YLq3CZJWDdtL4u1u1|mkdcUp7|sxJC+?Y z_@@s`v3j}Q7*z>6X~cwUxUL8G1KT)_XTp!KAbs;vCp{K3&~_X@+ew=-D}v`2MbFV0 zQsVsL=rXi-pI*G|iiz;VTCutgUs)hDzV1+4?8KcoP3xROf<M%qC6lgVdpFt4<-|uM z=#rl_b1#YjSIl6Toj2z_hOZcKupkdE(LozC(fN=FY(x|sk)ym|;Rq2E1xJWD%Z!ol Gu>S+TT-130 literal 0 HcmV?d00001 diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 112 zcmWIZ^baXu00LVle`k+i1*eDrX9XZ&1PX!JAex!M0Hgv8m>C3sGzdcgBZCA3T-xBj Q0Zb)W9Hva*zW_`e0M!8s0RR91 literal 0 HcmV?d00001 -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> The VIOT blob contains the following: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000058 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 66 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0002 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0008 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00000000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 0000 [04Eh 0078 2] PCI BDF end : 00FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 Acked-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-9-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 - tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes 2 files changed, 1 deletion(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,2 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/VIOT", diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 88 zcmWIZ^bd((0D?3pe`k+i1*eDrX9XZ&1PX!JAexE60Hgv8m>C3sGzXN&z`)2L0cSHX I{D-Rq0Q5fy0RR91 literal 0 HcmV?d00001 -- 2.25.1