Last few changes before rc0: a few bug fixes, but mostly docs stuff. -- PMM The following changes since commit a97fca4ceb9d9b10aa8b582e817a5ee6c42ffbaf: Merge remote-tracking branch 'remotes/mst/tags/for_upstream3' into staging (2021-07-16 16:34:42 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210718 for you to fetch changes up to 8fe612a183dec4c63afdc57537079bc742d024ca: target/arm: Remove duplicate 'plus1' function from Neon and SVE decode (2021-07-18 10:59:47 +0100) ---------------------------------------------------------------- target-arm queue: * Remove duplicate 'plus1' function from Neon and SVE decode * Fix offsets for TTBCR for big-endian hosts * docs: fix copyright date * docs: add license/version info to HTML footers * docs: add an About section * docs: document some more arm boards ---------------------------------------------------------------- Peter Maydell (11): docs: Fix documentation Copyright date docs: Stop calling the top level subsections of our manual 'manuals' docs: Remove "Contents:" lines from top-level subsections docs: Move deprecation, build and license info out of system/ docs: Add some actual About text to about/index.rst docs: Add license note to the HTML page footer docs: Add QEMU version information to HTML footer docs: Add skeletal documentation of cubieboard docs: Add skeletal documentation of the emcraft-sf2 docs: Add skeletal documentation of highbank and midway target/arm: Remove duplicate 'plus1' function from Neon and SVE decode Richard Henderson (1): target/arm: Fix offsets for TTBCR docs/_templates/footer.html | 14 ++++++++++++++ docs/{system => about}/build-platforms.rst | 0 docs/{system => about}/deprecated.rst | 0 docs/about/index.rst | 27 +++++++++++++++++++++++++++ docs/{system => about}/license.rst | 0 docs/{system => about}/removed-features.rst | 0 docs/conf.py | 2 +- docs/devel/index.rst | 7 +------ docs/index.rst | 1 + docs/interop/index.rst | 9 ++------- docs/meson.build | 3 ++- docs/specs/index.rst | 7 ++----- docs/system/arm/cubieboard.rst | 16 ++++++++++++++++ docs/system/arm/emcraft-sf2.rst | 15 +++++++++++++++ docs/system/arm/highbank.rst | 19 +++++++++++++++++++ docs/system/index.rst | 11 +---------- docs/system/target-arm.rst | 3 +++ docs/tools/index.rst | 7 ++----- docs/user/index.rst | 7 +------ target/arm/neon-ls.decode | 4 ++-- target/arm/neon-shared.decode | 2 +- target/arm/sve.decode | 2 +- target/arm/helper.c | 11 +++++++---- target/arm/translate-neon.c | 5 ----- target/arm/translate-sve.c | 5 ----- MAINTAINERS | 4 ++++ 26 files changed, 122 insertions(+), 59 deletions(-) create mode 100644 docs/_templates/footer.html rename docs/{system => about}/build-platforms.rst (100%) rename docs/{system => about}/deprecated.rst (100%) create mode 100644 docs/about/index.rst rename docs/{system => about}/license.rst (100%) rename docs/{system => about}/removed-features.rst (100%) create mode 100644 docs/system/arm/cubieboard.rst create mode 100644 docs/system/arm/emcraft-sf2.rst create mode 100644 docs/system/arm/highbank.rst From: Richard Henderson <richard.henderson@linaro.org> The functions vmsa_ttbcr_write and vmsa_ttbcr_raw_write expect the offset to be for the complete TCR structure, not the offset to the low 32-bits of a uint64_t. Using offsetoflow32 in this case breaks big-endian hosts. For TTBCR2, we do want the high 32-bits of a uint64_t. Use cp15.tcr_el[*].raw_tcr as the offsetofhigh32 argument to clarify this. Buglink: https://gitlab.com/qemu-project/qemu/-/issues/187 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210709230621.938821-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, .raw_writefn = vmsa_ttbcr_raw_write, - .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tcr_el[3]), - offsetoflow32(CPUARMState, cp15.tcr_el[1])} }, + /* No offsetoflow32 -- pass the entire TCR to writefn/raw_writefn. */ + .bank_fieldoffsets = { offsetof(CPUARMState, cp15.tcr_el[3]), + offsetof(CPUARMState, cp15.tcr_el[1])} }, REGINFO_SENTINEL }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo ttbcr2_reginfo = { .name = "TTBCR2", .cp = 15, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 3, .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_ALIAS, - .bank_fieldoffsets = { offsetofhigh32(CPUARMState, cp15.tcr_el[3]), - offsetofhigh32(CPUARMState, cp15.tcr_el[1]) }, + .bank_fieldoffsets = { + offsetofhigh32(CPUARMState, cp15.tcr_el[3].raw_tcr), + offsetofhigh32(CPUARMState, cp15.tcr_el[1].raw_tcr), + }, }; static void omap_ticonfig_write(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.20.1 In commit 6d8980a38fa we updated the copyright string we present to the user in -version output, About dialogs, etc, but we forgot that the Sphinx manuals have a separate copyright string setting. Update that one too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20210705095547.15790-2-peter.maydell@linaro.org --- docs/conf.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/conf.py b/docs/conf.py index XXXXXXX..XXXXXXX 100644 --- a/docs/conf.py +++ b/docs/conf.py @@ -XXX,XX +XXX,XX @@ # General information about the project. project = u'QEMU' -copyright = u'2020, The QEMU Project Developers' +copyright = u'2021, The QEMU Project Developers' author = u'The QEMU Project Developers' # The version info for the project you're documenting, acts as replacement for -- 2.20.1 We merged our previous multiple-manual setup into a single Sphinx manual, but we left some text in the various index.rst lines that still calls the top level subsections separate 'manuals'. Update them to talk about "this section of the manual" instead, and remove now-obsolete comments about how the index.rst files are the "top level page for the 'foo' manual". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20210705095547.15790-3-peter.maydell@linaro.org --- docs/devel/index.rst | 5 +---- docs/interop/index.rst | 7 ++----- docs/specs/index.rst | 5 ++--- docs/system/index.rst | 5 +---- docs/tools/index.rst | 5 ++--- docs/user/index.rst | 5 +---- 6 files changed, 9 insertions(+), 23 deletions(-) diff --git a/docs/devel/index.rst b/docs/devel/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/index.rst +++ b/docs/devel/index.rst @@ -XXX,XX +XXX,XX @@ -.. This is the top level page for the 'devel' manual. - - Developer Information ===================== -This manual documents various parts of the internals of QEMU. +This section of the manual documents various parts of the internals of QEMU. You only need to read it if you are interested in reading or modifying QEMU's source code. diff --git a/docs/interop/index.rst b/docs/interop/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/index.rst +++ b/docs/interop/index.rst @@ -XXX,XX +XXX,XX @@ -.. This is the top level page for the 'interop' manual. - - System Emulation Management and Interoperability ================================================ -This manual contains documents and specifications that are useful -for making QEMU interoperate with other software. +This section of the manual contains documents and specifications that +are useful for making QEMU interoperate with other software. Contents: diff --git a/docs/specs/index.rst b/docs/specs/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/index.rst +++ b/docs/specs/index.rst @@ -XXX,XX +XXX,XX @@ -.. This is the top level page for the 'specs' manual - - System Emulation Guest Hardware Specifications ============================================== +This section of the manual contains specifications of +guest hardware that is specific to QEMU. Contents: diff --git a/docs/system/index.rst b/docs/system/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/index.rst +++ b/docs/system/index.rst @@ -XXX,XX +XXX,XX @@ -.. This is the top level page for the 'system' manual. - - System Emulation ================ -This manual is the overall guide for users using QEMU +This section of the manual is the overall guide for users using QEMU for full system emulation (as opposed to user-mode emulation). This includes working with hypervisors such as KVM, Xen, Hax or Hypervisor.Framework. diff --git a/docs/tools/index.rst b/docs/tools/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/tools/index.rst +++ b/docs/tools/index.rst @@ -XXX,XX +XXX,XX @@ -.. This is the top level page for the 'tools' manual - - Tools ===== +This section of the manual documents QEMU's "tools": its +command line utilities and other standalone programs. Contents: diff --git a/docs/user/index.rst b/docs/user/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/user/index.rst +++ b/docs/user/index.rst @@ -XXX,XX +XXX,XX @@ -.. This is the top level page for the 'user' manual. - - User Mode Emulation =================== -This manual is the overall guide for users using QEMU +This section of the manual is the overall guide for users using QEMU for user-mode emulation. In this mode, QEMU can launch processes compiled for one CPU on another CPU. -- 2.20.1 Since the top-level subsections aren't self-contained manuals any more, the "Contents:" lines at the top of each of their index pages look a bit odd; remove them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20210705095547.15790-4-peter.maydell@linaro.org --- docs/devel/index.rst | 2 -- docs/interop/index.rst | 2 -- docs/specs/index.rst | 2 -- docs/system/index.rst | 2 -- docs/tools/index.rst | 2 -- docs/user/index.rst | 2 -- 6 files changed, 12 deletions(-) diff --git a/docs/devel/index.rst b/docs/devel/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/index.rst +++ b/docs/devel/index.rst @@ -XXX,XX +XXX,XX @@ This section of the manual documents various parts of the internals of QEMU. You only need to read it if you are interested in reading or modifying QEMU's source code. -Contents: - .. toctree:: :maxdepth: 2 :includehidden: diff --git a/docs/interop/index.rst b/docs/interop/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/index.rst +++ b/docs/interop/index.rst @@ -XXX,XX +XXX,XX @@ System Emulation Management and Interoperability This section of the manual contains documents and specifications that are useful for making QEMU interoperate with other software. -Contents: - .. toctree:: :maxdepth: 2 diff --git a/docs/specs/index.rst b/docs/specs/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/index.rst +++ b/docs/specs/index.rst @@ -XXX,XX +XXX,XX @@ System Emulation Guest Hardware Specifications This section of the manual contains specifications of guest hardware that is specific to QEMU. -Contents: - .. toctree:: :maxdepth: 2 diff --git a/docs/system/index.rst b/docs/system/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/index.rst +++ b/docs/system/index.rst @@ -XXX,XX +XXX,XX @@ for full system emulation (as opposed to user-mode emulation). This includes working with hypervisors such as KVM, Xen, Hax or Hypervisor.Framework. -Contents: - .. toctree:: :maxdepth: 3 diff --git a/docs/tools/index.rst b/docs/tools/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/tools/index.rst +++ b/docs/tools/index.rst @@ -XXX,XX +XXX,XX @@ Tools This section of the manual documents QEMU's "tools": its command line utilities and other standalone programs. -Contents: - .. toctree:: :maxdepth: 2 diff --git a/docs/user/index.rst b/docs/user/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/user/index.rst +++ b/docs/user/index.rst @@ -XXX,XX +XXX,XX @@ This section of the manual is the overall guide for users using QEMU for user-mode emulation. In this mode, QEMU can launch processes compiled for one CPU on another CPU. -Contents: - .. toctree:: :maxdepth: 2 -- 2.20.1 Now that we have a single Sphinx manual rather than multiple manuals, we can provide a better place for "common to all of QEMU" information like the deprecation notices, build platforms, license information, which we currently have in the system/ manual even though it applies to all of QEMU. Create a new directory about/ on the same level as system/, user/, etc, and move these documents there. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20210705095547.15790-5-peter.maydell@linaro.org --- docs/{system => about}/build-platforms.rst | 0 docs/{system => about}/deprecated.rst | 0 docs/about/index.rst | 10 ++++++++++ docs/{system => about}/license.rst | 0 docs/{system => about}/removed-features.rst | 0 docs/index.rst | 1 + docs/system/index.rst | 4 ---- 7 files changed, 11 insertions(+), 4 deletions(-) rename docs/{system => about}/build-platforms.rst (100%) rename docs/{system => about}/deprecated.rst (100%) create mode 100644 docs/about/index.rst rename docs/{system => about}/license.rst (100%) rename docs/{system => about}/removed-features.rst (100%) diff --git a/docs/system/build-platforms.rst b/docs/about/build-platforms.rst similarity index 100% rename from docs/system/build-platforms.rst rename to docs/about/build-platforms.rst diff --git a/docs/system/deprecated.rst b/docs/about/deprecated.rst similarity index 100% rename from docs/system/deprecated.rst rename to docs/about/deprecated.rst diff --git a/docs/about/index.rst b/docs/about/index.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/about/index.rst @@ -XXX,XX +XXX,XX @@ +About QEMU +========== + +.. toctree:: + :maxdepth: 2 + + build-platforms + deprecated + removed-features + license diff --git a/docs/system/license.rst b/docs/about/license.rst similarity index 100% rename from docs/system/license.rst rename to docs/about/license.rst diff --git a/docs/system/removed-features.rst b/docs/about/removed-features.rst similarity index 100% rename from docs/system/removed-features.rst rename to docs/about/removed-features.rst diff --git a/docs/index.rst b/docs/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -XXX,XX +XXX,XX @@ Welcome to QEMU's documentation! :maxdepth: 2 :caption: Contents: + about/index system/index user/index tools/index diff --git a/docs/system/index.rst b/docs/system/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/index.rst +++ b/docs/system/index.rst @@ -XXX,XX +XXX,XX @@ or Hypervisor.Framework. targets security multi-process - deprecated - removed-features - build-platforms - license -- 2.20.1 Add some text to About to act as a brief introduction to the QEMU manual and to make the about page a bit less of an abrupt start to it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20210705095547.15790-6-peter.maydell@linaro.org --- docs/about/index.rst | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/docs/about/index.rst b/docs/about/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/index.rst +++ b/docs/about/index.rst @@ -XXX,XX +XXX,XX @@ About QEMU ========== +QEMU is a generic and open source machine emulator and virtualizer. + +QEMU can be used in several different ways. The most common is for +"system emulation", where it provides a virtual model of an +entire machine (CPU, memory and emulated devices) to run a guest OS. +In this mode the CPU may be fully emulated, or it may work with +a hypervisor such as KVM, Xen, Hax or Hypervisor.Framework to +allow the guest to run directly on the host CPU. + +The second supported way to use QEMU is "user mode emulation", +where QEMU can launch processes compiled for one CPU on another CPU. +In this mode the CPU is always emulated. + +QEMU also provides a number of standalone commandline utilities, +such as the `qemu-img` disk image utility that allows you to create, +convert and modify disk images. + .. toctree:: :maxdepth: 2 -- 2.20.1 The standard Sphinx/RTD HTML page footer gives a copyright line (based on the 'copyright' variable set in conf.py) and a line "Built with Sphinx using a theme provided by Read the Docs" (which can be disabled via the html_show_sphinx variable, but we leave it enabled). As a free software project, we'd like to also mention the license QEMU and its manual are released under. Add a template footer.html which defines the 'extrafooter' block that the RtD theme provides for this purpose. The new line of text will go below the existing copyright and sphinx-acknowledgement lines. (Unfortunately the RTD footer template does not permit putting it after the copyright but before the sphinx-acknowledgement.) We use the templating functionality to make the new text also be a hyperlink to the about/license.html page of the manual. Unlike rst files, HTML template files are not reported to our depfile plugin, so we maintain a manual list in meson.build. New template files should be rare, so not being able to auto-generate the dependency info is not too awkward. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20210705095547.15790-7-peter.maydell@linaro.org --- docs/_templates/footer.html | 12 ++++++++++++ docs/meson.build | 3 ++- MAINTAINERS | 1 + 3 files changed, 15 insertions(+), 1 deletion(-) create mode 100644 docs/_templates/footer.html diff --git a/docs/_templates/footer.html b/docs/_templates/footer.html new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/_templates/footer.html @@ -XXX,XX +XXX,XX @@ +{% extends "!footer.html" %} +{% block extrafooter %} + +<!-- Empty para to force a blank line after "Built with Sphinx ..." --> +<p></p> + +{% trans path=pathto('about/license') %} +<p><a href="{{ path }}">QEMU and this manual are released under the +GNU General Public License, version 2.</a></p> +{% endtrans %} +{{ super() }} +{% endblock %} diff --git a/docs/meson.build b/docs/meson.build index XXXXXXX..XXXXXXX 100644 --- a/docs/meson.build +++ b/docs/meson.build @@ -XXX,XX +XXX,XX @@ if build_docs meson.source_root() / 'docs/sphinx/qapidoc.py', meson.source_root() / 'docs/sphinx/qmp_lexer.py', qapi_gen_depends ] + sphinx_template_files = [ meson.source_root() / 'docs/_templates/footer.html' ] have_ga = have_tools and config_host.has_key('CONFIG_GUEST_AGENT') @@ -XXX,XX +XXX,XX @@ if build_docs output: 'docs.stamp', input: files('conf.py'), depfile: 'docs.d', - depend_files: sphinx_extn_depends, + depend_files: [ sphinx_extn_depends, sphinx_template_files ], command: [SPHINX_ARGS, '-Ddepfile=@DEPFILE@', '-Ddepfile_stamp=@OUTPUT0@', '-b', 'html', '-d', private_dir, diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Maintained F: docs/conf.py F: docs/*/conf.py F: docs/sphinx/ +F: docs/_templates/ Miscellaneous ------------- -- 2.20.1 Add a line to the HTML document footer mentioning the QEMU version. The version information is already provided in very faint text below the QEMU logo in the sidebar, but that is rather inconspicious, so repeating it in the footer seems useful. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20210705095547.15790-8-peter.maydell@linaro.org --- docs/_templates/footer.html | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/_templates/footer.html b/docs/_templates/footer.html index XXXXXXX..XXXXXXX 100644 --- a/docs/_templates/footer.html +++ b/docs/_templates/footer.html @@ -XXX,XX +XXX,XX @@ <!-- Empty para to force a blank line after "Built with Sphinx ..." --> <p></p> +<p>This documentation is for QEMU version {{ version }}.</p> + {% trans path=pathto('about/license') %} <p><a href="{{ path }}">QEMU and this manual are released under the GNU General Public License, version 2.</a></p> -- 2.20.1 Add skeletal documentation of the cubieboard machine. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210713142226.19155-2-peter.maydell@linaro.org --- docs/system/arm/cubieboard.rst | 16 ++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 18 insertions(+) create mode 100644 docs/system/arm/cubieboard.rst diff --git a/docs/system/arm/cubieboard.rst b/docs/system/arm/cubieboard.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/cubieboard.rst @@ -XXX,XX +XXX,XX @@ +Cubietech Cubieboard (``cubieboard``) +===================================== + +The ``cubieboard`` model emulates the Cubietech Cubieboard, +which is a Cortex-A8 based single-board computer using +the AllWinner A10 SoC. + +Emulated devices: + +- Timer +- UART +- RTC +- EMAC +- SDHCI +- USB controller +- SATA controller diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/aspeed arm/sabrelite arm/digic + arm/cubieboard arm/musicpal arm/gumstix arm/nrf diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: hw/*/allwinner* F: include/hw/*/allwinner* F: hw/arm/cubieboard.c +F: docs/system/arm/cubieboard.rst Allwinner-h3 M: Niek Linnenbank <nieklinnenbank@gmail.com> -- 2.20.1 Add skeletal documentation of the emcraft-sf2 machine. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210713142226.19155-3-peter.maydell@linaro.org --- docs/system/arm/emcraft-sf2.rst | 15 +++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 17 insertions(+) create mode 100644 docs/system/arm/emcraft-sf2.rst diff --git a/docs/system/arm/emcraft-sf2.rst b/docs/system/arm/emcraft-sf2.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/emcraft-sf2.rst @@ -XXX,XX +XXX,XX @@ +Emcraft SmartFusion2 SOM kit (``emcraft-sf2``) +============================================== + +The ``emcraft-sf2`` board emulates the SmartFusion2 SOM kit from +Emcraft (M2S010). This is a System-on-Module from EmCraft systems, +based on the SmartFusion2 SoC FPGA from Microsemi Corporation. +The SoC is based on a Cortex-M4 processor. + +Emulated devices: + +- System timer +- System registers +- SPI controller +- UART +- EMAC diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/sabrelite arm/digic arm/cubieboard + arm/emcraft-sf2 arm/musicpal arm/gumstix arm/nrf diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/msf2-som.c +F: docs/system/arm/emcraft-sf2.rst ASPEED BMCs M: Cédric Le Goater <clg@kaod.org> -- 2.20.1 Add skeletal documentation for the highbank and midway machines. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210713142226.19155-4-peter.maydell@linaro.org --- docs/system/arm/highbank.rst | 19 +++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 21 insertions(+) create mode 100644 docs/system/arm/highbank.rst diff --git a/docs/system/arm/highbank.rst b/docs/system/arm/highbank.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/highbank.rst @@ -XXX,XX +XXX,XX @@ +Calxeda Highbank and Midway (``highbank``, ``midway``) +====================================================== + +``highbank`` is a model of the Calxeda Highbank (ECX-1000) system, +which has four Cortex-A9 cores. + +``midway`` is a model of the Calxeda Midway (ECX-2000) system, +which has four Cortex-A15 cores. + +Emulated devices: + +- L2x0 cache controller +- SP804 dual timer +- PL011 UART +- PL061 GPIOs +- PL031 RTC +- PL022 synchronous serial port controller +- AHCI +- XGMAC ethernet controllers diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/digic arm/cubieboard arm/emcraft-sf2 + arm/highbank arm/musicpal arm/gumstix arm/nrf diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/highbank.c F: hw/net/xgmac.c +F: docs/system/arm/highbank.rst Canon DIGIC M: Antony Pavlov <antonynpavlov@gmail.com> -- 2.20.1 The Neon and SVE decoders use private 'plus1' functions to implement "add one" for the !function decoder syntax. We have a generic "plus_1" function in translate.h, so use that instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210715095341.701-1-peter.maydell@linaro.org --- target/arm/neon-ls.decode | 4 ++-- target/arm/neon-shared.decode | 2 +- target/arm/sve.decode | 2 +- target/arm/translate-neon.c | 5 ----- target/arm/translate-sve.c | 5 ----- 5 files changed, 4 insertions(+), 14 deletions(-) diff --git a/target/arm/neon-ls.decode b/target/arm/neon-ls.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-ls.decode +++ b/target/arm/neon-ls.decode @@ -XXX,XX +XXX,XX @@ VLD_all_lanes 1111 0100 1 . 1 0 rn:4 .... 11 n:2 size:2 t:1 a:1 rm:4 \ vd=%vd_dp # Neon load/store single structure to one lane -%imm1_5_p1 5:1 !function=plus1 -%imm1_6_p1 6:1 !function=plus1 +%imm1_5_p1 5:1 !function=plus_1 +%imm1_6_p1 6:1 !function=plus_1 VLDST_single 1111 0100 1 . l:1 0 rn:4 .... 00 n:2 reg_idx:3 align:1 rm:4 \ vd=%vd_dp size=0 stride=1 diff --git a/target/arm/neon-shared.decode b/target/arm/neon-shared.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/neon-shared.decode +++ b/target/arm/neon-shared.decode @@ -XXX,XX +XXX,XX @@ # which is 0 for fp16 and 1 for fp32 into a MO_* constant. # (Note that this is the reverse of the sense of the 1-bit size # field in the 3same_fp Neon insns.) -%vcadd_size 20:1 !function=plus1 +%vcadd_size 20:1 !function=plus_1 VCMLA 1111 110 rot:2 . 1 . .... .... 1000 . q:1 . 0 .... \ vm=%vm_dp vn=%vn_dp vd=%vd_dp size=%vcadd_size diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ ########################################################################### # Named fields. These are primarily for disjoint fields. -%imm4_16_p1 16:4 !function=plus1 +%imm4_16_p1 16:4 !function=plus_1 %imm6_22_5 22:1 5:5 %imm7_22_16 22:2 16:5 %imm8_16_10 16:5 10:3 diff --git a/target/arm/translate-neon.c b/target/arm/translate-neon.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c +++ b/target/arm/translate-neon.c @@ -XXX,XX +XXX,XX @@ #include "translate.h" #include "translate-a32.h" -static inline int plus1(DisasContext *s, int x) -{ - return x + 1; -} - static inline int neon_3same_fp_size(DisasContext *s, int x) { /* Convert 0==fp32, 1==fp16 into a MO_* value */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static int tszimm_shl(DisasContext *s, int x) return x - (8 << tszimm_esz(s, x)); } -static inline int plus1(DisasContext *s, int x) -{ - return x + 1; -} - /* The SH bit is in bit 8. Extract the low 8 and shift. */ static inline int expand_imm_sh8s(DisasContext *s, int x) { -- 2.20.1 Some arm patches; my to-review queue is by no means empty, but this is a big enough set of patches to be getting on with... -- PMM The following changes since commit cb9c6a8e5ad6a1f0ce164d352e3102df46986e22: .gitlab-ci.d/windows: Work-around timeout and OpenGL problems of the MSYS2 jobs (2023-01-04 18:58:33 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230105 for you to fetch changes up to 93c9678de9dc7d2e68f9e8477da072bac30ef132: hw/net: Fix read of uninitialized memory in imx_fec. (2023-01-05 15:33:00 +0000) ---------------------------------------------------------------- target-arm queue: * Implement AArch32 ARMv8-R support * Add Cortex-R52 CPU * fix handling of HLT semihosting in system mode * hw/timer/ixm_epit: cleanup and fix bug in compare handling * target/arm: Coding style fixes * target/arm: Clean up includes * nseries: minor code cleanups * target/arm: align exposed ID registers with Linux * hw/arm/smmu-common: remove unnecessary inlines * i.MX7D: Handle GPT timers * i.MX7D: Connect IRQs to GPIO devices * i.MX6UL: Add a specific GPT timer instance * hw/net: Fix read of uninitialized memory in imx_fec ---------------------------------------------------------------- Alex Bennée (1): target/arm: fix handling of HLT semihosting in system mode Axel Heider (8): hw/timer/imx_epit: improve comments hw/timer/imx_epit: cleanup CR defines hw/timer/imx_epit: define SR_OCIF hw/timer/imx_epit: update interrupt state on CR write access hw/timer/imx_epit: hard reset initializes CR with 0 hw/timer/imx_epit: factor out register write handlers hw/timer/imx_epit: remove explicit fields cnt and freq hw/timer/imx_epit: fix compare timer handling Claudio Fontana (1): target/arm: cleanup cpu includes Fabiano Rosas (5): target/arm: Fix checkpatch comment style warnings in helper.c target/arm: Fix checkpatch space errors in helper.c target/arm: Fix checkpatch brace errors in helper.c target/arm: Remove unused includes from m_helper.c target/arm: Remove unused includes from helper.c Jean-Christophe Dubois (4): i.MX7D: Connect GPT timers to IRQ i.MX7D: Compute clock frequency for the fixed frequency clocks. i.MX6UL: Add a specific GPT timer instance for the i.MX6UL i.MX7D: Connect IRQs to GPIO devices. Peter Maydell (1): target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it Philippe Mathieu-Daudé (5): hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg hw/arm/nseries: Constify various read-only arrays hw/arm/nseries: Silent -Wmissing-field-initializers warning hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope hw/arm/smmu-common: Avoid using inlined functions with external linkage Stephen Longfield (1): hw/net: Fix read of uninitialized memory in imx_fec. Tobias Röhmel (7): target/arm: Don't add all MIDR aliases for cores that implement PMSA target/arm: Make RVBAR available for all ARMv8 CPUs target/arm: Make stage_2_format for cache attributes optional target/arm: Enable TTBCR_EAE for ARMv8-R AArch32 target/arm: Add PMSAv8r registers target/arm: Add PMSAv8r functionality target/arm: Add ARM Cortex-R52 CPU Zhuojia Shen (1): target/arm: align exposed ID registers with Linux include/hw/arm/fsl-imx7.h | 20 + include/hw/arm/smmu-common.h | 3 - include/hw/input/tsc2xxx.h | 4 +- include/hw/timer/imx_epit.h | 8 +- include/hw/timer/imx_gpt.h | 1 + target/arm/cpu.h | 6 + target/arm/internals.h | 4 + hw/arm/fsl-imx6ul.c | 2 +- hw/arm/fsl-imx7.c | 41 +- hw/arm/nseries.c | 28 +- hw/arm/smmu-common.c | 15 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 3 +- hw/misc/imx6ul_ccm.c | 6 - hw/misc/imx7_ccm.c | 49 ++- hw/net/imx_fec.c | 8 +- hw/timer/imx_epit.c | 376 +++++++++------- hw/timer/imx_gpt.c | 25 ++ target/arm/cpu.c | 35 +- target/arm/cpu64.c | 6 - target/arm/cpu_tcg.c | 42 ++ target/arm/debug_helper.c | 3 + target/arm/helper.c | 871 +++++++++++++++++++++++++++++--------- target/arm/m_helper.c | 16 - target/arm/machine.c | 28 ++ target/arm/ptw.c | 152 +++++-- target/arm/tlb_helper.c | 4 + target/arm/translate.c | 2 +- tests/tcg/aarch64/sysregs.c | 24 +- tests/tcg/aarch64/Makefile.target | 7 +- 30 files changed, 1330 insertions(+), 461 deletions(-) In get_phys_addr_twostage() we set the lg_page_size of the result to the maximum of the stage 1 and stage 2 page sizes. This works for the case where we do want to create a TLB entry, because we know the common TLB code only creates entries of the TARGET_PAGE_SIZE and asking for a size larger than that only means that invalidations invalidate the whole larger area. However, if lg_page_size is smaller than TARGET_PAGE_SIZE this effectively means "don't create a TLB entry"; in this case if either S1 or S2 said "this covers less than a page and can't go in a TLB" then the final result also should be marked that way. Set the resulting page size to 0 if either stage asked for a less-than-a-page entry, and expand the comment to explain what's going on. This has no effect for VMSA because currently the VMSA lookup always returns results that cover at least TARGET_PAGE_SIZE; however when we add v8R support it will reuse this code path, and for v8R the S1 and S2 results can be smaller than TARGET_PAGE_SIZE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221212142708.610090-1-peter.maydell@linaro.org --- target/arm/ptw.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_twostage(CPUARMState *env, S1Translate *ptw, } /* - * Use the maximum of the S1 & S2 page size, so that invalidation - * of pages > TARGET_PAGE_SIZE works correctly. + * If either S1 or S2 returned a result smaller than TARGET_PAGE_SIZE, + * this means "don't put this in the TLB"; in this case, return a + * result with lg_page_size == 0 to achieve that. Otherwise, + * use the maximum of the S1 & S2 page size, so that invalidation + * of pages > TARGET_PAGE_SIZE works correctly. (This works even though + * we know the combined result permissions etc only cover the minimum + * of the S1 and S2 page size, because we know that the common TLB code + * never actually creates TLB entries bigger than TARGET_PAGE_SIZE, + * and passing a larger page size value only affects invalidations.) */ - if (result->f.lg_page_size < s1_lgpgsz) { + if (result->f.lg_page_size < TARGET_PAGE_BITS || + s1_lgpgsz < TARGET_PAGE_BITS) { + result->f.lg_page_size = 0; + } else if (result->f.lg_page_size < s1_lgpgsz) { result->f.lg_page_size = s1_lgpgsz; } -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Cores with PMSA have the MPUIR register which has the same encoding as the MIDR alias with opc2=4. So we only add that alias if we are not realizing a core that implements PMSA. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221206102504.165775-2-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_NO_RAW, .resetvalue = cpu->midr, .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid), .readfn = midr_read }, - /* crn = 0 op1 = 0 crm = 0 op2 = 4,7 : AArch32 aliases of MIDR */ - { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, - .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, - .access = PL1_R, .resetvalue = cpu->midr }, + /* crn = 0 op1 = 0 crm = 0 op2 = 7 : AArch32 aliases of MIDR */ { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 7, .access = PL1_R, .resetvalue = cpu->midr }, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .accessfn = access_aa64_tid1, .type = ARM_CP_CONST, .resetvalue = cpu->revidr }, }; + ARMCPRegInfo id_v8_midr_alias_cp_reginfo = { + .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, + .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, + .access = PL1_R, .resetvalue = cpu->midr + }; ARMCPRegInfo id_cp_reginfo[] = { /* These are common to v8 and pre-v8 */ { .name = "CTR", @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } if (arm_feature(env, ARM_FEATURE_V8)) { define_arm_cp_regs(cpu, id_v8_midr_cp_reginfo); + if (!arm_feature(env, ARM_FEATURE_PMSA)) { + define_one_arm_cp_reg(cpu, &id_v8_midr_alias_cp_reginfo); + } } else { define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo); } -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> RVBAR shadows RVBAR_ELx where x is the highest exception level if the highest EL is not EL3. This patch also allows ARMv8 CPUs to change the reset address with the rvbar property. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-3-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 6 +++++- target/arm/helper.c | 21 ++++++++++++++------- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, CPACR, CP11, 3); #endif + if (arm_feature(env, ARM_FEATURE_V8)) { + env->cp15.rvbar = cpu->rvbar_prop; + env->regs[15] = cpu->rvbar_prop; + } } #if defined(CONFIG_USER_ONLY) @@ -XXX,XX +XXX,XX @@ void arm_cpu_post_init(Object *obj) qdev_property_add_static(DEVICE(obj), &arm_cpu_reset_hivecs_property); } - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { object_property_add_uint64_ptr(obj, "rvbar", &cpu->rvbar_prop, OBJ_PROP_FLAG_READWRITE); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (!arm_feature(env, ARM_FEATURE_EL3) && !arm_feature(env, ARM_FEATURE_EL2)) { ARMCPRegInfo rvbar = { - .name = "RVBAR_EL1", .state = ARM_CP_STATE_AA64, + .name = "RVBAR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, .access = PL1_R, .fieldoffset = offsetof(CPUARMState, cp15.rvbar), @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } /* RVBAR_EL2 is only implemented if EL2 is the highest EL */ if (!arm_feature(env, ARM_FEATURE_EL3)) { - ARMCPRegInfo rvbar = { - .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1, - .access = PL2_R, - .fieldoffset = offsetof(CPUARMState, cp15.rvbar), + ARMCPRegInfo rvbar[] = { + { + .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1, + .access = PL2_R, + .fieldoffset = offsetof(CPUARMState, cp15.rvbar), + }, + { .name = "RVBAR", .type = ARM_CP_ALIAS, + .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, + .access = PL2_R, + .fieldoffset = offsetof(CPUARMState, cp15.rvbar), + }, }; - define_one_arm_cp_reg(cpu, &rvbar); + define_arm_cp_regs(cpu, rvbar); } } -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> The v8R PMSAv8 has a two-stage MPU translation process, but, unlike VMSAv8, the stage 2 attributes are in the same format as the stage 1 attributes (8-bit MAIR format). Rather than converting the MAIR format to the format used for VMSA stage 2 (bits [5:2] of a VMSA stage 2 descriptor) and then converting back to do the attribute combination, allow combined_attrs_nofwb() to accept s2 attributes that are already in the MAIR format. We move the assert() to combined_attrs_fwb(), because that function really does require a VMSA stage 2 attribute format. (We will never get there for v8R, because PMSAv8 does not implement FEAT_S2FWB.) Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-4-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static uint8_t combined_attrs_nofwb(uint64_t hcr, { uint8_t s1lo, s2lo, s1hi, s2hi, s2_mair_attrs, ret_attrs; - s2_mair_attrs = convert_stage2_attrs(hcr, s2.attrs); + if (s2.is_s2_format) { + s2_mair_attrs = convert_stage2_attrs(hcr, s2.attrs); + } else { + s2_mair_attrs = s2.attrs; + } s1lo = extract32(s1.attrs, 0, 4); s2lo = extract32(s2_mair_attrs, 0, 4); @@ -XXX,XX +XXX,XX @@ static uint8_t force_cacheattr_nibble_wb(uint8_t attr) */ static uint8_t combined_attrs_fwb(ARMCacheAttrs s1, ARMCacheAttrs s2) { + assert(s2.is_s2_format && !s1.is_s2_format); + switch (s2.attrs) { case 7: /* Use stage 1 attributes */ @@ -XXX,XX +XXX,XX @@ static ARMCacheAttrs combine_cacheattrs(uint64_t hcr, ARMCacheAttrs ret; bool tagged = false; - assert(s2.is_s2_format && !s1.is_s2_format); + assert(!s1.is_s2_format); ret.is_s2_format = false; if (s1.attrs == 0xf0) { -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> ARMv8-R AArch32 CPUs behave as if TTBCR.EAE is always 1 even tough they don't have the TTBCR register. See ARM Architecture Reference Manual Supplement - ARMv8, for the ARMv8-R AArch32 architecture profile Version:A.c section C1.2. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-5-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 4 ++++ target/arm/debug_helper.c | 3 +++ target/arm/tlb_helper.c | 4 ++++ 3 files changed, 11 insertions(+) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ unsigned int arm_pamax(ARMCPU *cpu); static inline bool extended_addresses_enabled(CPUARMState *env) { uint64_t tcr = env->cp15.tcr_el[arm_is_secure(env) ? 3 : 1]; + if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + return true; + } return arm_el_is_aa64(env, 1) || (arm_feature(env, ARM_FEATURE_LPAE) && (tcr & TTBCR_EAE)); } diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t arm_debug_exception_fsr(CPUARMState *env) if (target_el == 2 || arm_el_is_aa64(env, target_el)) { using_lpae = true; + } else if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + using_lpae = true; } else { if (arm_feature(env, ARM_FEATURE_LPAE) && (env->cp15.tcr_el[target_el] & TTBCR_EAE)) { diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ bool regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx) if (el == 2 || arm_el_is_aa64(env, el)) { return true; } + if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + return true; + } if (arm_feature(env, ARM_FEATURE_LPAE) && (regime_tcr(env, mmu_idx) & TTBCR_EAE)) { return true; -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Message-id: 20221206102504.165775-6-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 + target/arm/cpu.c | 28 +++- target/arm/helper.c | 302 +++++++++++++++++++++++++++++++++++++++++++ target/arm/machine.c | 28 ++++ 4 files changed, 360 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { }; uint64_t sctlr_el[4]; }; + uint64_t vsctlr; /* Virtualization System control register. */ uint64_t cpacr_el1; /* Architectural feature access control register */ uint64_t cptr_el[4]; /* ARMv8 feature trap registers */ uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */ @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { */ uint32_t *rbar[M_REG_NUM_BANKS]; uint32_t *rlar[M_REG_NUM_BANKS]; + uint32_t *hprbar; + uint32_t *hprlar; uint32_t mair0[M_REG_NUM_BANKS]; uint32_t mair1[M_REG_NUM_BANKS]; + uint32_t hprselr; } pmsav8; /* v8M SAU */ @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool has_mpu; /* PMSAv7 MPU number of supported regions */ uint32_t pmsav7_dregion; + /* PMSAv8 MPU number of supported hyp regions */ + uint32_t pmsav8r_hdregion; /* v8M SAU number of supported regions */ uint32_t sau_sregion; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) sizeof(*env->pmsav7.dracr) * cpu->pmsav7_dregion); } } + + if (cpu->pmsav8r_hdregion > 0) { + memset(env->pmsav8.hprbar, 0, + sizeof(*env->pmsav8.hprbar) * cpu->pmsav8r_hdregion); + memset(env->pmsav8.hprlar, 0, + sizeof(*env->pmsav8.hprlar) * cpu->pmsav8r_hdregion); + } + env->pmsav7.rnr[M_REG_NS] = 0; env->pmsav7.rnr[M_REG_S] = 0; env->pmsav8.mair0[M_REG_NS] = 0; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* MPU can be configured out of a PMSA CPU either by setting has-mpu * to false or by setting pmsav7-dregion to 0. */ - if (!cpu->has_mpu) { - cpu->pmsav7_dregion = 0; - } - if (cpu->pmsav7_dregion == 0) { + if (!cpu->has_mpu || cpu->pmsav7_dregion == 0) { cpu->has_mpu = false; + cpu->pmsav7_dregion = 0; + cpu->pmsav8r_hdregion = 0; } if (arm_feature(env, ARM_FEATURE_PMSA) && @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) env->pmsav7.dracr = g_new0(uint32_t, nr); } } + + if (cpu->pmsav8r_hdregion > 0xff) { + error_setg(errp, "PMSAv8 MPU EL2 #regions invalid %" PRIu32, + cpu->pmsav8r_hdregion); + return; + } + + if (cpu->pmsav8r_hdregion) { + env->pmsav8.hprbar = g_new0(uint32_t, + cpu->pmsav8r_hdregion); + env->pmsav8.hprlar = g_new0(uint32_t, + cpu->pmsav8r_hdregion); + } } if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void pmsav7_rgnr_write(CPUARMState *env, const ARMCPRegInfo *ri, raw_write(env, ri, value); } +static void prbar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value; +} + +static uint64_t prbar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]]; +} + +static void prlar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value; +} + +static uint64_t prlar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]]; +} + +static void prselr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + /* + * Ignore writes that would select not implemented region. + * This is architecturally UNPREDICTABLE. + */ + if (value >= cpu->pmsav7_dregion) { + return; + } + + env->pmsav7.rnr[M_REG_NS] = value; +} + +static void hprbar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.hprbar[env->pmsav8.hprselr] = value; +} + +static uint64_t hprbar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.hprbar[env->pmsav8.hprselr]; +} + +static void hprlar_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + env->pmsav8.hprlar[env->pmsav8.hprselr] = value; +} + +static uint64_t hprlar_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pmsav8.hprlar[env->pmsav8.hprselr]; +} + +static void hprenr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + uint32_t n; + uint32_t bit; + ARMCPU *cpu = env_archcpu(env); + + /* Ignore writes to unimplemented regions */ + int rmax = MIN(cpu->pmsav8r_hdregion, 32); + value &= MAKE_64BIT_MASK(0, rmax); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + + /* Register alias is only valid for first 32 indexes */ + for (n = 0; n < rmax; ++n) { + bit = extract32(value, n, 1); + env->pmsav8.hprlar[n] = deposit32( + env->pmsav8.hprlar[n], 0, 1, bit); + } +} + +static uint64_t hprenr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + uint32_t n; + uint32_t result = 0x0; + ARMCPU *cpu = env_archcpu(env); + + /* Register alias is only valid for first 32 indexes */ + for (n = 0; n < MIN(cpu->pmsav8r_hdregion, 32); ++n) { + if (env->pmsav8.hprlar[n] & 0x1) { + result |= (0x1 << n); + } + } + return result; +} + +static void hprselr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + + /* + * Ignore writes that would select not implemented region. + * This is architecturally UNPREDICTABLE. + */ + if (value >= cpu->pmsav8r_hdregion) { + return; + } + + env->pmsav8.hprselr = value; +} + +static void pmsav8r_regn_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = env_archcpu(env); + uint8_t index = (extract32(ri->opc0, 0, 1) << 4) | + (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1); + + tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ + + if (ri->opc1 & 4) { + if (index >= cpu->pmsav8r_hdregion) { + return; + } + if (ri->opc2 & 0x1) { + env->pmsav8.hprlar[index] = value; + } else { + env->pmsav8.hprbar[index] = value; + } + } else { + if (index >= cpu->pmsav7_dregion) { + return; + } + if (ri->opc2 & 0x1) { + env->pmsav8.rlar[M_REG_NS][index] = value; + } else { + env->pmsav8.rbar[M_REG_NS][index] = value; + } + } +} + +static uint64_t pmsav8r_regn_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu = env_archcpu(env); + uint8_t index = (extract32(ri->opc0, 0, 1) << 4) | + (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1); + + if (ri->opc1 & 4) { + if (index >= cpu->pmsav8r_hdregion) { + return 0x0; + } + if (ri->opc2 & 0x1) { + return env->pmsav8.hprlar[index]; + } else { + return env->pmsav8.hprbar[index]; + } + } else { + if (index >= cpu->pmsav7_dregion) { + return 0x0; + } + if (ri->opc2 & 0x1) { + return env->pmsav8.rlar[M_REG_NS][index]; + } else { + return env->pmsav8.rbar[M_REG_NS][index]; + } + } +} + +static const ARMCPRegInfo pmsav8r_cp_reginfo[] = { + { .name = "PRBAR", + .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_NO_RAW, + .accessfn = access_tvm_trvm, + .readfn = prbar_read, .writefn = prbar_write }, + { .name = "PRLAR", + .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_NO_RAW, + .accessfn = access_tvm_trvm, + .readfn = prlar_read, .writefn = prlar_write }, + { .name = "PRSELR", .resetvalue = 0, + .cp = 15, .opc1 = 0, .crn = 6, .crm = 2, .opc2 = 1, + .access = PL1_RW, .accessfn = access_tvm_trvm, + .writefn = prselr_write, + .fieldoffset = offsetof(CPUARMState, pmsav7.rnr[M_REG_NS]) }, + { .name = "HPRBAR", .resetvalue = 0, + .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 0, + .access = PL2_RW, .type = ARM_CP_NO_RAW, + .readfn = hprbar_read, .writefn = hprbar_write }, + { .name = "HPRLAR", + .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 1, + .access = PL2_RW, .type = ARM_CP_NO_RAW, + .readfn = hprlar_read, .writefn = hprlar_write }, + { .name = "HPRSELR", .resetvalue = 0, + .cp = 15, .opc1 = 4, .crn = 6, .crm = 2, .opc2 = 1, + .access = PL2_RW, + .writefn = hprselr_write, + .fieldoffset = offsetof(CPUARMState, pmsav8.hprselr) }, + { .name = "HPRENR", + .cp = 15, .opc1 = 4, .crn = 6, .crm = 1, .opc2 = 1, + .access = PL2_RW, .type = ARM_CP_NO_RAW, + .readfn = hprenr_read, .writefn = hprenr_write }, +}; + static const ARMCPRegInfo pmsav7_cp_reginfo[] = { /* Reset for all these registers is handled in arm_cpu_reset(), * because the PMSAv7 is also used by M-profile CPUs, which do @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->pmsav7_dregion << 8 }; + /* HMPUIR is specific to PMSA V8 */ + ARMCPRegInfo id_hmpuir_reginfo = { + .name = "HMPUIR", + .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL2_R, .type = ARM_CP_CONST, + .resetvalue = cpu->pmsav8r_hdregion + }; static const ARMCPRegInfo crn0_wi_reginfo = { .name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, id_cp_reginfo); if (!arm_feature(env, ARM_FEATURE_PMSA)) { define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo); + } else if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + uint32_t i = 0; + char *tmp_string; + + define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); + define_one_arm_cp_reg(cpu, &id_hmpuir_reginfo); + define_arm_cp_regs(cpu, pmsav8r_cp_reginfo); + + /* Register alias is only valid for first 32 indexes */ + for (i = 0; i < MIN(cpu->pmsav7_dregion, 32); ++i) { + uint8_t crm = 0b1000 | extract32(i, 1, 3); + uint8_t opc1 = extract32(i, 4, 1); + uint8_t opc2 = extract32(i, 0, 1) << 2; + + tmp_string = g_strdup_printf("PRBAR%u", i); + ARMCPRegInfo tmp_prbarn_reginfo = { + .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL1_RW, .resetvalue = 0, + .accessfn = access_tvm_trvm, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_prbarn_reginfo); + g_free(tmp_string); + + opc2 = extract32(i, 0, 1) << 2 | 0x1; + tmp_string = g_strdup_printf("PRLAR%u", i); + ARMCPRegInfo tmp_prlarn_reginfo = { + .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL1_RW, .resetvalue = 0, + .accessfn = access_tvm_trvm, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_prlarn_reginfo); + g_free(tmp_string); + } + + /* Register alias is only valid for first 32 indexes */ + for (i = 0; i < MIN(cpu->pmsav8r_hdregion, 32); ++i) { + uint8_t crm = 0b1000 | extract32(i, 1, 3); + uint8_t opc1 = 0b100 | extract32(i, 4, 1); + uint8_t opc2 = extract32(i, 0, 1) << 2; + + tmp_string = g_strdup_printf("HPRBAR%u", i); + ARMCPRegInfo tmp_hprbarn_reginfo = { + .name = tmp_string, + .type = ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL2_RW, .resetvalue = 0, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_hprbarn_reginfo); + g_free(tmp_string); + + opc2 = extract32(i, 0, 1) << 2 | 0x1; + tmp_string = g_strdup_printf("HPRLAR%u", i); + ARMCPRegInfo tmp_hprlarn_reginfo = { + .name = tmp_string, + .type = ARM_CP_NO_RAW, + .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, + .access = PL2_RW, .resetvalue = 0, + .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read + }; + define_one_arm_cp_reg(cpu, &tmp_hprlarn_reginfo); + g_free(tmp_string); + } } else if (arm_feature(env, ARM_FEATURE_V7)) { define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); } @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) sctlr.type |= ARM_CP_SUPPRESS_TB_END; } define_one_arm_cp_reg(cpu, &sctlr); + + if (arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8)) { + ARMCPRegInfo vsctlr = { + .name = "VSCTLR", .state = ARM_CP_STATE_AA32, + .cp = 15, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, + .access = PL2_RW, .resetvalue = 0x0, + .fieldoffset = offsetoflow32(CPUARMState, cp15.vsctlr), + }; + define_one_arm_cp_reg(cpu, &vsctlr); + } } if (cpu_isar_feature(aa64_lor, cpu)) { diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static bool pmsav8_needed(void *opaque) arm_feature(env, ARM_FEATURE_V8); } +static bool pmsav8r_needed(void *opaque) +{ + ARMCPU *cpu = opaque; + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_PMSA) && + arm_feature(env, ARM_FEATURE_V8) && + !arm_feature(env, ARM_FEATURE_M); +} + +static const VMStateDescription vmstate_pmsav8r = { + .name = "cpu/pmsav8/pmsav8r", + .version_id = 1, + .minimum_version_id = 1, + .needed = pmsav8r_needed, + .fields = (VMStateField[]) { + VMSTATE_VARRAY_UINT32(env.pmsav8.hprbar, ARMCPU, + pmsav8r_hdregion, 0, vmstate_info_uint32, uint32_t), + VMSTATE_VARRAY_UINT32(env.pmsav8.hprlar, ARMCPU, + pmsav8r_hdregion, 0, vmstate_info_uint32, uint32_t), + VMSTATE_END_OF_LIST() + }, +}; + static const VMStateDescription vmstate_pmsav8 = { .name = "cpu/pmsav8", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_pmsav8 = { VMSTATE_UINT32(env.pmsav8.mair0[M_REG_NS], ARMCPU), VMSTATE_UINT32(env.pmsav8.mair1[M_REG_NS], ARMCPU), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_pmsav8r, + NULL } }; -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Add PMSAv8r translation. Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-7-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 126 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 104 insertions(+), 22 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool pmsav7_use_background_region(ARMCPU *cpu, ARMMMUIdx mmu_idx, if (arm_feature(env, ARM_FEATURE_M)) { return env->v7m.mpu_ctrl[is_secure] & R_V7M_MPU_CTRL_PRIVDEFENA_MASK; - } else { - return regime_sctlr(env, mmu_idx) & SCTLR_BR; } + + if (mmu_idx == ARMMMUIdx_Stage2) { + return false; + } + + return regime_sctlr(env, mmu_idx) & SCTLR_BR; } static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, return !(result->f.prot & (1 << access_type)); } +static uint32_t *regime_rbar(CPUARMState *env, ARMMMUIdx mmu_idx, + uint32_t secure) +{ + if (regime_el(env, mmu_idx) == 2) { + return env->pmsav8.hprbar; + } else { + return env->pmsav8.rbar[secure]; + } +} + +static uint32_t *regime_rlar(CPUARMState *env, ARMMMUIdx mmu_idx, + uint32_t secure) +{ + if (regime_el(env, mmu_idx) == 2) { + return env->pmsav8.hprlar; + } else { + return env->pmsav8.rlar[secure]; + } +} + bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, bool secure, GetPhysAddrResult *result, @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, bool hit = false; uint32_t addr_page_base = address & TARGET_PAGE_MASK; uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1); + int region_counter; + + if (regime_el(env, mmu_idx) == 2) { + region_counter = cpu->pmsav8r_hdregion; + } else { + region_counter = cpu->pmsav7_dregion; + } result->f.lg_page_size = TARGET_PAGE_BITS; result->f.phys_addr = address; @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, *mregion = -1; } + if (mmu_idx == ARMMMUIdx_Stage2) { + fi->stage2 = true; + } + /* * Unlike the ARM ARM pseudocode, we don't need to check whether this * was an exception vector read from the vector table (which is always @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, hit = true; } - for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) { + uint32_t bitmask; + if (arm_feature(env, ARM_FEATURE_M)) { + bitmask = 0x1f; + } else { + bitmask = 0x3f; + fi->level = 0; + } + + for (n = region_counter - 1; n >= 0; n--) { /* region search */ /* - * Note that the base address is bits [31:5] from the register - * with bits [4:0] all zeroes, but the limit address is bits - * [31:5] from the register with bits [4:0] all ones. + * Note that the base address is bits [31:x] from the register + * with bits [x-1:0] all zeroes, but the limit address is bits + * [31:x] from the register with bits [x:0] all ones. Where x is + * 5 for Cortex-M and 6 for Cortex-R */ - uint32_t base = env->pmsav8.rbar[secure][n] & ~0x1f; - uint32_t limit = env->pmsav8.rlar[secure][n] | 0x1f; + uint32_t base = regime_rbar(env, mmu_idx, secure)[n] & ~bitmask; + uint32_t limit = regime_rlar(env, mmu_idx, secure)[n] | bitmask; - if (!(env->pmsav8.rlar[secure][n] & 0x1)) { + if (!(regime_rlar(env, mmu_idx, secure)[n] & 0x1)) { /* Region disabled */ continue; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, * PMSAv7 where highest-numbered-region wins) */ fi->type = ARMFault_Permission; - fi->level = 1; + if (arm_feature(env, ARM_FEATURE_M)) { + fi->level = 1; + } return true; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, } if (!hit) { - /* background fault */ - fi->type = ARMFault_Background; + if (arm_feature(env, ARM_FEATURE_M)) { + fi->type = ARMFault_Background; + } else { + fi->type = ARMFault_Permission; + } return true; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, /* hit using the background region */ get_phys_addr_pmsav7_default(env, mmu_idx, address, &result->f.prot); } else { - uint32_t ap = extract32(env->pmsav8.rbar[secure][matchregion], 1, 2); - uint32_t xn = extract32(env->pmsav8.rbar[secure][matchregion], 0, 1); + uint32_t matched_rbar = regime_rbar(env, mmu_idx, secure)[matchregion]; + uint32_t matched_rlar = regime_rlar(env, mmu_idx, secure)[matchregion]; + uint32_t ap = extract32(matched_rbar, 1, 2); + uint32_t xn = extract32(matched_rbar, 0, 1); bool pxn = false; if (arm_feature(env, ARM_FEATURE_V8_1M)) { - pxn = extract32(env->pmsav8.rlar[secure][matchregion], 4, 1); + pxn = extract32(matched_rlar, 4, 1); } if (m_is_system_region(env, address)) { @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, xn = 1; } - result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap); + if (regime_el(env, mmu_idx) == 2) { + result->f.prot = simple_ap_to_rw_prot_is_user(ap, + mmu_idx != ARMMMUIdx_E2); + } else { + result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap); + } + + if (!arm_feature(env, ARM_FEATURE_M)) { + uint8_t attrindx = extract32(matched_rlar, 1, 3); + uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)]; + uint8_t sh = extract32(matched_rlar, 3, 2); + + if (regime_sctlr(env, mmu_idx) & SCTLR_WXN && + result->f.prot & PAGE_WRITE && mmu_idx != ARMMMUIdx_Stage2) { + xn = 0x1; + } + + if ((regime_el(env, mmu_idx) == 1) && + regime_sctlr(env, mmu_idx) & SCTLR_UWXN && ap == 0x1) { + pxn = 0x1; + } + + result->cacheattrs.is_s2_format = false; + result->cacheattrs.attrs = extract64(mair, attrindx * 8, 8); + result->cacheattrs.shareability = sh; + } + if (result->f.prot && !xn && !(pxn && !is_user)) { result->f.prot |= PAGE_EXEC; } - /* - * We don't need to look the attribute up in the MAIR0/MAIR1 - * registers because that only tells us about cacheability. - */ + if (mregion) { *mregion = matchregion; } } fi->type = ARMFault_Permission; - fi->level = 1; + if (arm_feature(env, ARM_FEATURE_M)) { + fi->level = 1; + } return !(result->f.prot & (1 << access_type)); } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_twostage(CPUARMState *env, S1Translate *ptw, cacheattrs1 = result->cacheattrs; memset(result, 0, sizeof(*result)); - ret = get_phys_addr_lpae(env, ptw, ipa, access_type, is_el0, result, fi); + if (arm_feature(env, ARM_FEATURE_PMSA)) { + ret = get_phys_addr_pmsav8(env, ipa, access_type, + ptw->in_mmu_idx, is_secure, result, fi); + } else { + ret = get_phys_addr_lpae(env, ptw, ipa, access_type, + is_el0, result, fi); + } fi->s2addr = ipa; /* Combine the S1 and S2 perms. */ -- 2.25.1 From: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> All constants are taken from the ARM Cortex-R52 Processor TRM Revision: r1p3 Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20221206102504.165775-8-tobias.roehmel@rwth-aachen.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) define_arm_cp_regs(cpu, cortexr5_cp_reginfo); } +static void cortex_r52_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_PMSA); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + cpu->midr = 0x411fd133; /* r1p3 */ + cpu->revidr = 0x00000000; + cpu->reset_fpsid = 0x41034023; + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x12111111; + cpu->isar.mvfr2 = 0x00000043; + cpu->ctr = 0x8144c004; + cpu->reset_sctlr = 0x30c50838; + cpu->isar.id_pfr0 = 0x00000131; + cpu->isar.id_pfr1 = 0x10111001; + cpu->isar.id_dfr0 = 0x03010006; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00211040; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01200000; + cpu->isar.id_mmfr3 = 0xf0102211; + cpu->isar.id_mmfr4 = 0x00000010; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232142; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x00010001; + cpu->isar.dbgdidr = 0x77168000; + cpu->clidr = (1 << 27) | (1 << 24) | 0x3; + cpu->ccsidr[0] = 0x700fe01a; /* 32KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe00a; /* 32KB L1 icache */ + + cpu->pmsav7_dregion = 16; + cpu->pmsav8r_hdregion = 16; +} + static void cortex_r5f_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, + { .name = "cortex-r52", .initfn = cortex_r52_initfn }, { .name = "ti925t", .initfn = ti925t_initfn }, { .name = "sa1100", .initfn = sa1100_initfn }, { .name = "sa1110", .initfn = sa1110_initfn }, -- 2.25.1 From: Alex Bennée <alex.bennee@linaro.org> The check semihosting_enabled() wants to know if the guest is currently in user mode. Unlike the other cases the test was inverted causing us to block semihosting calls in non-EL0 modes. Cc: qemu-stable@nongnu.org Fixes: 19b26317e9 (target/arm: Honour -semihosting-config userspace=on) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_hlt(DisasContext *s, int imm) * semihosting, to provide some semblance of security * (and for consistency with our 32-bit semihosting). */ - if (semihosting_enabled(s->current_el != 0) && + if (semihosting_enabled(s->current_el == 0) && (imm == (s->thumb ? 0x3c : 0xf000))) { gen_exception_internal_insn(s, EXCP_SEMIHOST); return; -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Fix typos, add background information Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_set_freq(IMXEPITState *s) } } +/* + * This is called both on hardware (device) reset and software reset. + */ static void imx_epit_reset(DeviceState *dev) { IMXEPITState *s = IMX_EPIT(dev); - /* - * Soft reset doesn't touch some bits; hard reset clears them - */ + /* Soft reset doesn't touch some bits; hard reset clears them */ s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); s->sr = 0; s->lr = EPIT_TIMER_MAX; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); + /* Update the frequency. Has been done already in case of a reset. */ if (!(s->cr & CR_SWR)) { imx_epit_set_freq(s); } @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, break; case 1: /* SR - ACK*/ - /* writing 1 to OCIF clear the OCIF bit */ + /* writing 1 to OCIF clears the OCIF bit */ if (value & 0x01) { s->sr = 0; imx_epit_update_int(s); @@ -XXX,XX +XXX,XX @@ static void imx_epit_realize(DeviceState *dev, Error **errp) 0x00001000); sysbus_init_mmio(sbd, &s->iomem); + /* + * The reload timer keeps running when the peripheral is enabled. It is a + * kind of wall clock that does not generate any interrupts. The callback + * needs to be provided, but it does nothing as the ptimer already supports + * all necessary reloading functionality. + */ s->timer_reload = ptimer_init(imx_epit_reload, s, PTIMER_POLICY_LEGACY); + /* + * The compare timer is running only when the peripheral configuration is + * in a state that will generate compare interrupts. + */ s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_LEGACY); } -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> remove unused defines, add needed defines Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_epit.h | 4 ++-- hw/timer/imx_epit.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_epit.h +++ b/include/hw/timer/imx_epit.h @@ -XXX,XX +XXX,XX @@ #define CR_OCIEN (1 << 2) #define CR_RLD (1 << 3) #define CR_PRESCALE_SHIFT (4) -#define CR_PRESCALE_MASK (0xfff) +#define CR_PRESCALE_BITS (12) #define CR_SWR (1 << 16) #define CR_IOVW (1 << 17) #define CR_DBGEN (1 << 18) @@ -XXX,XX +XXX,XX @@ #define CR_DOZEN (1 << 20) #define CR_STOPEN (1 << 21) #define CR_CLKSRC_SHIFT (24) -#define CR_CLKSRC_MASK (0x3 << CR_CLKSRC_SHIFT) +#define CR_CLKSRC_BITS (2) #define EPIT_TIMER_MAX 0XFFFFFFFFUL diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_set_freq(IMXEPITState *s) uint32_t clksrc; uint32_t prescaler; - clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2); - prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12); + clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS); + prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS); s->freq = imx_ccm_get_clock_frequency(s->ccm, imx_epit_clocks[clksrc]) / prescaler; -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_epit.h | 2 ++ hw/timer/imx_epit.c | 12 ++++++------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_epit.h +++ b/include/hw/timer/imx_epit.h @@ -XXX,XX +XXX,XX @@ #define CR_CLKSRC_SHIFT (24) #define CR_CLKSRC_BITS (2) +#define SR_OCIF (1 << 0) + #define EPIT_TIMER_MAX 0XFFFFFFFFUL #define TYPE_IMX_EPIT "imx.epit" diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static const IMXClk imx_epit_clocks[] = { */ static void imx_epit_update_int(IMXEPITState *s) { - if (s->sr && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) { + if ((s->sr & SR_OCIF) && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) { qemu_irq_raise(s->irq); } else { qemu_irq_lower(s->irq); @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, break; case 1: /* SR - ACK*/ - /* writing 1 to OCIF clears the OCIF bit */ - if (value & 0x01) { - s->sr = 0; + /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */ + if (value & SR_OCIF) { + s->sr = 0; /* SR.OCIF is the only bit in this register anyway */ imx_epit_update_int(s); } break; @@ -XXX,XX +XXX,XX @@ static void imx_epit_cmp(void *opaque) IMXEPITState *s = IMX_EPIT(opaque); DPRINTF("sr was %d\n", s->sr); - - s->sr = 1; + /* Set interrupt status bit SR.OCIF and update the interrupt state */ + s->sr |= SR_OCIF; imx_epit_update_int(s); } -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> The interrupt state can change due to: - reset clears both SR.OCIF and CR.OCIE - write to CR.EN or CR.OCIE Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, if (s->cr & CR_SWR) { /* handle the reset */ imx_epit_reset(DEVICE(s)); - /* - * TODO: could we 'break' here? following operations appear - * to duplicate the work imx_epit_reset() already did. - */ } + /* + * The interrupt state can change due to: + * - reset clears both SR.OCIF and CR.OCIE + * - write to CR.EN or CR.OCIE + */ + imx_epit_update_int(s); + + /* + * TODO: could we 'break' here for reset? following operations appear + * to duplicate the work imx_epit_reset() already did. + */ + ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_set_freq(IMXEPITState *s) /* * This is called both on hardware (device) reset and software reset. */ -static void imx_epit_reset(DeviceState *dev) +static void imx_epit_reset(IMXEPITState *s, bool is_hard_reset) { - IMXEPITState *s = IMX_EPIT(dev); - /* Soft reset doesn't touch some bits; hard reset clears them */ - s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); + if (is_hard_reset) { + s->cr = 0; + } else { + s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); + } s->sr = 0; s->lr = EPIT_TIMER_MAX; s->cmp = 0; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, s->cr = value & 0x03ffffff; if (s->cr & CR_SWR) { /* handle the reset */ - imx_epit_reset(DEVICE(s)); + imx_epit_reset(s, false); } /* @@ -XXX,XX +XXX,XX @@ static void imx_epit_realize(DeviceState *dev, Error **errp) s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_LEGACY); } +static void imx_epit_dev_reset(DeviceState *dev) +{ + IMXEPITState *s = IMX_EPIT(dev); + imx_epit_reset(s, true); +} + static void imx_epit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->realize = imx_epit_realize; - dc->reset = imx_epit_reset; + dc->reset = imx_epit_dev_reset; dc->vmsd = &vmstate_imx_timer_epit; dc->desc = "i.MX periodic timer"; } -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 215 ++++++++++++++++++++++++-------------------- 1 file changed, 117 insertions(+), 98 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_reload_compare_timer(IMXEPITState *s) } } +static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) +{ + uint32_t oldcr = s->cr; + + s->cr = value & 0x03ffffff; + + if (s->cr & CR_SWR) { + /* handle the reset */ + imx_epit_reset(s, false); + } + + /* + * The interrupt state can change due to: + * - reset clears both SR.OCIF and CR.OCIE + * - write to CR.EN or CR.OCIE + */ + imx_epit_update_int(s); + + /* + * TODO: could we 'break' here for reset? following operations appear + * to duplicate the work imx_epit_reset() already did. + */ + + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); + + /* Update the frequency. Has been done already in case of a reset. */ + if (!(s->cr & CR_SWR)) { + imx_epit_set_freq(s); + } + + if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { + if (s->cr & CR_ENMOD) { + if (s->cr & CR_RLD) { + ptimer_set_limit(s->timer_reload, s->lr, 1); + ptimer_set_limit(s->timer_cmp, s->lr, 1); + } else { + ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); + ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); + } + } + + imx_epit_reload_compare_timer(s); + ptimer_run(s->timer_reload, 0); + if (s->cr & CR_OCIEN) { + ptimer_run(s->timer_cmp, 0); + } else { + ptimer_stop(s->timer_cmp); + } + } else if (!(s->cr & CR_EN)) { + /* stop both timers */ + ptimer_stop(s->timer_reload); + ptimer_stop(s->timer_cmp); + } else if (s->cr & CR_OCIEN) { + if (!(oldcr & CR_OCIEN)) { + imx_epit_reload_compare_timer(s); + ptimer_run(s->timer_cmp, 0); + } + } else { + ptimer_stop(s->timer_cmp); + } + + ptimer_transaction_commit(s->timer_cmp); + ptimer_transaction_commit(s->timer_reload); +} + +static void imx_epit_write_sr(IMXEPITState *s, uint32_t value) +{ + /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */ + if (value & SR_OCIF) { + s->sr = 0; /* SR.OCIF is the only bit in this register anyway */ + imx_epit_update_int(s); + } +} + +static void imx_epit_write_lr(IMXEPITState *s, uint32_t value) +{ + s->lr = value; + + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); + if (s->cr & CR_RLD) { + /* Also set the limit if the LRD bit is set */ + /* If IOVW bit is set then set the timer value */ + ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW); + ptimer_set_limit(s->timer_cmp, s->lr, 0); + } else if (s->cr & CR_IOVW) { + /* If IOVW bit is set then set the timer value */ + ptimer_set_count(s->timer_reload, s->lr); + } + /* + * Commit the change to s->timer_reload, so it can propagate. Otherwise + * the timer interrupt may not fire properly. The commit must happen + * before calling imx_epit_reload_compare_timer(), which reads + * s->timer_reload internally again. + */ + ptimer_transaction_commit(s->timer_reload); + imx_epit_reload_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); +} + +static void imx_epit_write_cmp(IMXEPITState *s, uint32_t value) +{ + s->cmp = value; + + ptimer_transaction_begin(s->timer_cmp); + imx_epit_reload_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); +} + static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { IMXEPITState *s = IMX_EPIT(opaque); - uint64_t oldcr; DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(offset >> 2), (uint32_t)value); switch (offset >> 2) { case 0: /* CR */ - - oldcr = s->cr; - s->cr = value & 0x03ffffff; - if (s->cr & CR_SWR) { - /* handle the reset */ - imx_epit_reset(s, false); - } - - /* - * The interrupt state can change due to: - * - reset clears both SR.OCIF and CR.OCIE - * - write to CR.EN or CR.OCIE - */ - imx_epit_update_int(s); - - /* - * TODO: could we 'break' here for reset? following operations appear - * to duplicate the work imx_epit_reset() already did. - */ - - ptimer_transaction_begin(s->timer_cmp); - ptimer_transaction_begin(s->timer_reload); - - /* Update the frequency. Has been done already in case of a reset. */ - if (!(s->cr & CR_SWR)) { - imx_epit_set_freq(s); - } - - if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { - if (s->cr & CR_ENMOD) { - if (s->cr & CR_RLD) { - ptimer_set_limit(s->timer_reload, s->lr, 1); - ptimer_set_limit(s->timer_cmp, s->lr, 1); - } else { - ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); - ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); - } - } - - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_reload, 0); - if (s->cr & CR_OCIEN) { - ptimer_run(s->timer_cmp, 0); - } else { - ptimer_stop(s->timer_cmp); - } - } else if (!(s->cr & CR_EN)) { - /* stop both timers */ - ptimer_stop(s->timer_reload); - ptimer_stop(s->timer_cmp); - } else if (s->cr & CR_OCIEN) { - if (!(oldcr & CR_OCIEN)) { - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_cmp, 0); - } - } else { - ptimer_stop(s->timer_cmp); - } - - ptimer_transaction_commit(s->timer_cmp); - ptimer_transaction_commit(s->timer_reload); + imx_epit_write_cr(s, (uint32_t)value); break; - case 1: /* SR - ACK*/ - /* writing 1 to SR.OCIF clears this bit and turns the interrupt off */ - if (value & SR_OCIF) { - s->sr = 0; /* SR.OCIF is the only bit in this register anyway */ - imx_epit_update_int(s); - } + case 1: /* SR */ + imx_epit_write_sr(s, (uint32_t)value); break; - case 2: /* LR - set ticks */ - s->lr = value; - - ptimer_transaction_begin(s->timer_cmp); - ptimer_transaction_begin(s->timer_reload); - if (s->cr & CR_RLD) { - /* Also set the limit if the LRD bit is set */ - /* If IOVW bit is set then set the timer value */ - ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW); - ptimer_set_limit(s->timer_cmp, s->lr, 0); - } else if (s->cr & CR_IOVW) { - /* If IOVW bit is set then set the timer value */ - ptimer_set_count(s->timer_reload, s->lr); - } - /* - * Commit the change to s->timer_reload, so it can propagate. Otherwise - * the timer interrupt may not fire properly. The commit must happen - * before calling imx_epit_reload_compare_timer(), which reads - * s->timer_reload internally again. - */ - ptimer_transaction_commit(s->timer_reload); - imx_epit_reload_compare_timer(s); - ptimer_transaction_commit(s->timer_cmp); + case 2: /* LR */ + imx_epit_write_lr(s, (uint32_t)value); break; case 3: /* CMP */ - s->cmp = value; - - ptimer_transaction_begin(s->timer_cmp); - imx_epit_reload_compare_timer(s); - ptimer_transaction_commit(s->timer_cmp); - + imx_epit_write_cmp(s, (uint32_t)value); break; default: qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset); - break; } } + static void imx_epit_cmp(void *opaque) { IMXEPITState *s = IMX_EPIT(opaque); -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> The CNT register is a read-only register. There is no need to store it's value, it can be calculated on demand. The calculated frequency is needed temporarily only. Note that this is a migration compatibility break for all boards types that use the EPIT peripheral. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_epit.h | 2 - hw/timer/imx_epit.c | 73 ++++++++++++++----------------------- 2 files changed, 28 insertions(+), 47 deletions(-) diff --git a/include/hw/timer/imx_epit.h b/include/hw/timer/imx_epit.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_epit.h +++ b/include/hw/timer/imx_epit.h @@ -XXX,XX +XXX,XX @@ struct IMXEPITState { uint32_t sr; uint32_t lr; uint32_t cmp; - uint32_t cnt; - uint32_t freq; qemu_irq irq; }; diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_update_int(IMXEPITState *s) } } -/* - * Must be called from within a ptimer_transaction_begin/commit block - * for both s->timer_cmp and s->timer_reload. - */ -static void imx_epit_set_freq(IMXEPITState *s) +static uint32_t imx_epit_get_freq(IMXEPITState *s) { - uint32_t clksrc; - uint32_t prescaler; - - clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS); - prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS); - - s->freq = imx_ccm_get_clock_frequency(s->ccm, - imx_epit_clocks[clksrc]) / prescaler; - - DPRINTF("Setting ptimer frequency to %u\n", s->freq); - - if (s->freq) { - ptimer_set_freq(s->timer_reload, s->freq); - ptimer_set_freq(s->timer_cmp, s->freq); - } + uint32_t clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, CR_CLKSRC_BITS); + uint32_t prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, CR_PRESCALE_BITS); + uint32_t f_in = imx_ccm_get_clock_frequency(s->ccm, imx_epit_clocks[clksrc]); + uint32_t freq = f_in / prescaler; + DPRINTF("ptimer frequency is %u\n", freq); + return freq; } /* @@ -XXX,XX +XXX,XX @@ static void imx_epit_reset(IMXEPITState *s, bool is_hard_reset) s->sr = 0; s->lr = EPIT_TIMER_MAX; s->cmp = 0; - s->cnt = 0; ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); - /* stop both timers */ + + /* + * The reset switches off the input clock, so even if the CR.EN is still + * set, the timers are no longer running. + */ + assert(imx_epit_get_freq(s) == 0); ptimer_stop(s->timer_cmp); ptimer_stop(s->timer_reload); - /* compute new frequency */ - imx_epit_set_freq(s); /* init both timers to EPIT_TIMER_MAX */ ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); - if (s->freq && (s->cr & CR_EN)) { - /* if the timer is still enabled, restart it */ - ptimer_run(s->timer_reload, 0); - } ptimer_transaction_commit(s->timer_cmp); ptimer_transaction_commit(s->timer_reload); } -static uint32_t imx_epit_update_count(IMXEPITState *s) -{ - s->cnt = ptimer_get_count(s->timer_reload); - - return s->cnt; -} - static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) { IMXEPITState *s = IMX_EPIT(opaque); @@ -XXX,XX +XXX,XX @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) break; case 4: /* CNT */ - imx_epit_update_count(s); - reg_value = s->cnt; + reg_value = ptimer_get_count(s->timer_reload); break; default: @@ -XXX,XX +XXX,XX @@ static void imx_epit_reload_compare_timer(IMXEPITState *s) { if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) { /* if the compare feature is on and timers are running */ - uint32_t tmp = imx_epit_update_count(s); + uint32_t tmp = ptimer_get_count(s->timer_reload); uint64_t next; if (tmp > s->cmp) { /* It'll fire in this round of the timer */ @@ -XXX,XX +XXX,XX @@ static void imx_epit_reload_compare_timer(IMXEPITState *s) static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) { + uint32_t freq = 0; uint32_t oldcr = s->cr; s->cr = value & 0x03ffffff; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) ptimer_transaction_begin(s->timer_cmp); ptimer_transaction_begin(s->timer_reload); - /* Update the frequency. Has been done already in case of a reset. */ + /* + * Update the frequency. In case of a reset the input clock was + * switched off, so this can be skipped. + */ if (!(s->cr & CR_SWR)) { - imx_epit_set_freq(s); + freq = imx_epit_get_freq(s); + if (freq) { + ptimer_set_freq(s->timer_reload, freq); + ptimer_set_freq(s->timer_cmp, freq); + } } - if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { + if (freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { if (s->cr & CR_ENMOD) { if (s->cr & CR_RLD) { ptimer_set_limit(s->timer_reload, s->lr, 1); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps imx_epit_ops = { static const VMStateDescription vmstate_imx_timer_epit = { .name = TYPE_IMX_EPIT, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (VMStateField[]) { VMSTATE_UINT32(cr, IMXEPITState), VMSTATE_UINT32(sr, IMXEPITState), VMSTATE_UINT32(lr, IMXEPITState), VMSTATE_UINT32(cmp, IMXEPITState), - VMSTATE_UINT32(cnt, IMXEPITState), - VMSTATE_UINT32(freq, IMXEPITState), VMSTATE_PTIMER(timer_reload, IMXEPITState), VMSTATE_PTIMER(timer_cmp, IMXEPITState), VMSTATE_END_OF_LIST() -- 2.25.1 From: Axel Heider <axel.heider@hensoldt.net> - fix #1263 for CR writes - rework compare time handling - The compare timer has to run even if CR.OCIEN is not set, as SR.OCIF must be updated. - The compare timer fires exactly once when the compare value is less than the current value, but the reload values is less than the compare value. - The compare timer will never fire if the reload value is less than the compare value. Disable it in this case. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> [PMM: fixed minor style nits] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/imx_epit.c | 192 ++++++++++++++++++++++++++------------------ 1 file changed, 116 insertions(+), 76 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ * Originally written by Hans Jiang * Updated by Peter Chubb * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * Updated by Axel Heider * * This code is licensed under GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -XXX,XX +XXX,XX @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) return reg_value; } -/* Must be called from ptimer_transaction_begin/commit block for s->timer_cmp */ -static void imx_epit_reload_compare_timer(IMXEPITState *s) +/* + * Must be called from a ptimer_transaction_begin/commit block for + * s->timer_cmp, but outside of a transaction block of s->timer_reload, + * so the proper counter value is read. + */ +static void imx_epit_update_compare_timer(IMXEPITState *s) { - if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) { - /* if the compare feature is on and timers are running */ - uint32_t tmp = ptimer_get_count(s->timer_reload); - uint64_t next; - if (tmp > s->cmp) { - /* It'll fire in this round of the timer */ - next = tmp - s->cmp; - } else { /* catch it next time around */ - next = tmp - s->cmp + ((s->cr & CR_RLD) ? EPIT_TIMER_MAX : s->lr); + uint64_t counter = 0; + bool is_oneshot = false; + /* + * The compare timer only has to run if the timer peripheral is active + * and there is an input clock, Otherwise it can be switched off. + */ + bool is_active = (s->cr & CR_EN) && imx_epit_get_freq(s); + if (is_active) { + /* + * Calculate next timeout for compare timer. Reading the reload + * counter returns proper results only if pending transactions + * on it are committed here. Otherwise stale values are be read. + */ + counter = ptimer_get_count(s->timer_reload); + uint64_t limit = ptimer_get_limit(s->timer_cmp); + /* + * The compare timer is a periodic timer if the limit is at least + * the compare value. Otherwise it may fire at most once in the + * current round. + */ + bool is_oneshot = (limit >= s->cmp); + if (counter >= s->cmp) { + /* The compare timer fires in the current round. */ + counter -= s->cmp; + } else if (!is_oneshot) { + /* + * The compare timer fires after a reload, as it is below the + * compare value already in this round. Note that the counter + * value calculated below can be above the 32-bit limit, which + * is legal here because the compare timer is an internal + * helper ptimer only. + */ + counter += limit - s->cmp; + } else { + /* + * The compare timer won't fire in this round, and the limit is + * set to a value below the compare value. This practically means + * it will never fire, so it can be switched off. + */ + is_active = false; } - ptimer_set_count(s->timer_cmp, next); } + + /* + * Set the compare timer and let it run, or stop it. This is agnostic + * of CR.OCIEN bit, as this bit affects interrupt generation only. The + * compare timer needs to run even if no interrupts are to be generated, + * because the SR.OCIF bit must be updated also. + * Note that the timer might already be stopped or be running with + * counter values. However, finding out when an update is needed and + * when not is not trivial. It's much easier applying the setting again, + * as this does not harm either and the overhead is negligible. + */ + if (is_active) { + ptimer_set_count(s->timer_cmp, counter); + ptimer_run(s->timer_cmp, is_oneshot ? 1 : 0); + } else { + ptimer_stop(s->timer_cmp); + } + } static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) { - uint32_t freq = 0; uint32_t oldcr = s->cr; s->cr = value & 0x03ffffff; if (s->cr & CR_SWR) { - /* handle the reset */ + /* + * Reset clears CR.SWR again. It does not touch CR.EN, but the timers + * are still stopped because the input clock is disabled. + */ imx_epit_reset(s, false); + } else { + uint32_t freq; + uint32_t toggled_cr_bits = oldcr ^ s->cr; + /* re-initialize the limits if CR.RLD has changed */ + bool set_limit = toggled_cr_bits & CR_RLD; + /* set the counter if the timer got just enabled and CR.ENMOD is set */ + bool is_switched_on = (toggled_cr_bits & s->cr) & CR_EN; + bool set_counter = is_switched_on && (s->cr & CR_ENMOD); + + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); + freq = imx_epit_get_freq(s); + if (freq) { + ptimer_set_freq(s->timer_reload, freq); + ptimer_set_freq(s->timer_cmp, freq); + } + + if (set_limit || set_counter) { + uint64_t limit = (s->cr & CR_RLD) ? s->lr : EPIT_TIMER_MAX; + ptimer_set_limit(s->timer_reload, limit, set_counter ? 1 : 0); + if (set_limit) { + ptimer_set_limit(s->timer_cmp, limit, 0); + } + } + /* + * If there is an input clock and the peripheral is enabled, then + * ensure the wall clock timer is ticking. Otherwise stop the timers. + * The compare timer will be updated later. + */ + if (freq && (s->cr & CR_EN)) { + ptimer_run(s->timer_reload, 0); + } else { + ptimer_stop(s->timer_reload); + } + /* Commit changes to reload timer, so they can propagate. */ + ptimer_transaction_commit(s->timer_reload); + /* Update compare timer based on the committed reload timer value. */ + imx_epit_update_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); } /* @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_cr(IMXEPITState *s, uint32_t value) * - write to CR.EN or CR.OCIE */ imx_epit_update_int(s); - - /* - * TODO: could we 'break' here for reset? following operations appear - * to duplicate the work imx_epit_reset() already did. - */ - - ptimer_transaction_begin(s->timer_cmp); - ptimer_transaction_begin(s->timer_reload); - - /* - * Update the frequency. In case of a reset the input clock was - * switched off, so this can be skipped. - */ - if (!(s->cr & CR_SWR)) { - freq = imx_epit_get_freq(s); - if (freq) { - ptimer_set_freq(s->timer_reload, freq); - ptimer_set_freq(s->timer_cmp, freq); - } - } - - if (freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { - if (s->cr & CR_ENMOD) { - if (s->cr & CR_RLD) { - ptimer_set_limit(s->timer_reload, s->lr, 1); - ptimer_set_limit(s->timer_cmp, s->lr, 1); - } else { - ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1); - ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1); - } - } - - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_reload, 0); - if (s->cr & CR_OCIEN) { - ptimer_run(s->timer_cmp, 0); - } else { - ptimer_stop(s->timer_cmp); - } - } else if (!(s->cr & CR_EN)) { - /* stop both timers */ - ptimer_stop(s->timer_reload); - ptimer_stop(s->timer_cmp); - } else if (s->cr & CR_OCIEN) { - if (!(oldcr & CR_OCIEN)) { - imx_epit_reload_compare_timer(s); - ptimer_run(s->timer_cmp, 0); - } - } else { - ptimer_stop(s->timer_cmp); - } - - ptimer_transaction_commit(s->timer_cmp); - ptimer_transaction_commit(s->timer_reload); } static void imx_epit_write_sr(IMXEPITState *s, uint32_t value) @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_lr(IMXEPITState *s, uint32_t value) /* If IOVW bit is set then set the timer value */ ptimer_set_count(s->timer_reload, s->lr); } - /* - * Commit the change to s->timer_reload, so it can propagate. Otherwise - * the timer interrupt may not fire properly. The commit must happen - * before calling imx_epit_reload_compare_timer(), which reads - * s->timer_reload internally again. - */ + /* Commit the changes to s->timer_reload, so they can propagate. */ ptimer_transaction_commit(s->timer_reload); - imx_epit_reload_compare_timer(s); + /* Update the compare timer based on the committed reload timer value. */ + imx_epit_update_compare_timer(s); ptimer_transaction_commit(s->timer_cmp); } @@ -XXX,XX +XXX,XX @@ static void imx_epit_write_cmp(IMXEPITState *s, uint32_t value) { s->cmp = value; + /* Update the compare timer based on the committed reload timer value. */ ptimer_transaction_begin(s->timer_cmp); - imx_epit_reload_compare_timer(s); + imx_epit_update_compare_timer(s); ptimer_transaction_commit(s->timer_cmp); } @@ -XXX,XX +XXX,XX @@ static void imx_epit_cmp(void *opaque) { IMXEPITState *s = IMX_EPIT(opaque); + /* The cmp ptimer can't be running when the peripheral is disabled */ + assert(s->cr & CR_EN); + DPRINTF("sr was %d\n", s->sr); /* Set interrupt status bit SR.OCIF and update the interrupt state */ s->sr |= SR_OCIF; -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Fix these: WARNING: Block comments use a leading /* on a separate line WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-2-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 323 +++++++++++++++++++++++++++++--------------- 1 file changed, 215 insertions(+), 108 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri) static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t v) { - /* Raw write of a coprocessor register (as needed for migration, etc). + /* + * Raw write of a coprocessor register (as needed for migration, etc). * Note that constant registers are treated as write-ignored; the * caller should check for success by whether a readback gives the * value written. @@ -XXX,XX +XXX,XX @@ static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri, static bool raw_accessors_invalid(const ARMCPRegInfo *ri) { - /* Return true if the regdef would cause an assertion if you called + /* + * Return true if the regdef would cause an assertion if you called * read_raw_cp_reg() or write_raw_cp_reg() on it (ie if it is a * program bug for it not to have the NO_RAW flag). * NB that returning false here doesn't necessarily mean that calling @@ -XXX,XX +XXX,XX @@ bool write_list_to_cpustate(ARMCPU *cpu) if (ri->type & ARM_CP_NO_RAW) { continue; } - /* Write value and confirm it reads back as written + /* + * Write value and confirm it reads back as written * (to catch read-only registers and partially read-only * registers where the incoming migration value doesn't match) */ @@ -XXX,XX +XXX,XX @@ static gint cpreg_key_compare(gconstpointer a, gconstpointer b) void init_cpreg_list(ARMCPU *cpu) { - /* Initialise the cpreg_tuples[] array based on the cp_regs hash. + /* + * Initialise the cpreg_tuples[] array based on the cp_regs hash. * Note that we require cpreg_tuples[] to be sorted by key ID. */ GList *keys; @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_el3_aa32ns(CPUARMState *env, return CP_ACCESS_OK; } -/* Some secure-only AArch32 registers trap to EL3 if used from +/* + * Some secure-only AArch32 registers trap to EL3 if used from * Secure EL1 (but are just ordinary UNDEF in other non-EL3 contexts). * Note that an access from Secure EL1 can only happen if EL3 is AArch64. * We assume that the .access field is set to PL1_RW. @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_trap_aa32s_el1(CPUARMState *env, return CP_ACCESS_TRAP_UNCATEGORIZED; } -/* Check for traps to performance monitor registers, which are controlled +/* + * Check for traps to performance monitor registers, which are controlled * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3. */ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void fcse_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) ARMCPU *cpu = env_archcpu(env); if (raw_read(env, ri) != value) { - /* Unlike real hardware the qemu TLB uses virtual addresses, + /* + * Unlike real hardware the qemu TLB uses virtual addresses, * not modified virtual addresses, so this causes a TLB flush. */ tlb_flush(CPU(cpu)); @@ -XXX,XX +XXX,XX @@ static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri, if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA) && !extended_addresses_enabled(env)) { - /* For VMSA (when not using the LPAE long descriptor page table + /* + * For VMSA (when not using the LPAE long descriptor page table * format) this register includes the ASID, so do a TLB flush. * For PMSA it is purely a process ID and no action is needed. */ @@ -XXX,XX +XXX,XX @@ static void tlbiipas2is_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, } static const ARMCPRegInfo cp_reginfo[] = { - /* Define the secure and non-secure FCSE identifier CP registers + /* + * Define the secure and non-secure FCSE identifier CP registers * separately because there is no secure bank in V8 (no _EL3). This allows * the secure register to be properly reset and migrated. There is also no * v8 EL1 version of the register so the non-secure instance stands alone. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { .access = PL1_RW, .secure = ARM_CP_SECSTATE_S, .fieldoffset = offsetof(CPUARMState, cp15.fcseidr_s), .resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, }, - /* Define the secure and non-secure context identifier CP registers + /* + * Define the secure and non-secure context identifier CP registers * separately because there is no secure bank in V8 (no _EL3). This allows * the secure register to be properly reset and migrated. In the * non-secure case, the 32-bit register will have reset and migration @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { }; static const ARMCPRegInfo not_v8_cp_reginfo[] = { - /* NB: Some of these registers exist in v8 but with more precise + /* + * NB: Some of these registers exist in v8 but with more precise * definitions that don't use CP_ANY wildcards (mostly in v8_cp_reginfo[]). */ /* MMU Domain access control / MPU write buffer control */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { .writefn = dacr_write, .raw_writefn = raw_write, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), offsetoflow32(CPUARMState, cp15.dacr_ns) } }, - /* ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs. + /* + * ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs. * For v6 and v5, these mappings are overly broad. */ { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { }; static const ARMCPRegInfo not_v6_cp_reginfo[] = { - /* Not all pre-v6 cores implemented this WFI, so this is slightly + /* + * Not all pre-v6 cores implemented this WFI, so this is slightly * over-broad. */ { .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v6_cp_reginfo[] = { }; static const ARMCPRegInfo not_v7_cp_reginfo[] = { - /* Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which + /* + * Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which * is UNPREDICTABLE; we choose to NOP as most implementations do). */ { .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, .access = PL1_W, .type = ARM_CP_WFI }, - /* L1 cache lockdown. Not architectural in v6 and earlier but in practice + /* + * L1 cache lockdown. Not architectural in v6 and earlier but in practice * implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and * OMAPCP will override this space. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v7_cp_reginfo[] = { { .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY, .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, .resetvalue = 0 }, - /* We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR; + /* + * We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR; * implementing it as RAZ means the "debug architecture version" bits * will read as a reserved value, which should cause Linux to not try * to use the debug hardware. */ { .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* MMU TLB control. Note that the wildcarding means we cover not just + /* + * MMU TLB control. Note that the wildcarding means we cover not just * the unified TLB ops but also the dside/iside/inner-shareable variants. */ { .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY, @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* In ARMv8 most bits of CPACR_EL1 are RES0. */ if (!arm_feature(env, ARM_FEATURE_V8)) { - /* ARMv7 defines bits for unimplemented coprocessors as RAZ/WI. + /* + * ARMv7 defines bits for unimplemented coprocessors as RAZ/WI. * ASEDIS [31] and D32DIS [30] are both UNK/SBZP without VFP. * TRCDIS [28] is RAZ/WI since we do not implement a trace macrocell. */ @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, value |= R_CPACR_ASEDIS_MASK; } - /* VFPv3 and upwards with NEON implement 32 double precision + /* + * VFPv3 and upwards with NEON implement 32 double precision * registers (D0-D31). */ if (!cpu_isar_feature(aa32_simd_r32, env_archcpu(env))) { @@ -XXX,XX +XXX,XX @@ static uint64_t cpacr_read(CPUARMState *env, const ARMCPRegInfo *ri) static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri) { - /* Call cpacr_write() so that we reset with the correct RAO bits set + /* + * Call cpacr_write() so that we reset with the correct RAO bits set * for our CPU features. */ cpacr_write(env, ri, 0); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "MVA_prefetch", .cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1, .access = PL1_W, .type = ARM_CP_NOP }, - /* We need to break the TB after ISB to execute self-modifying code + /* + * We need to break the TB after ISB to execute self-modifying code * correctly and also to take any pending interrupts immediately. * So use arm_cp_write_ignore() function instead of ARM_CP_NOP flag. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s), offsetof(CPUARMState, cp15.ifar_ns) }, .resetvalue = 0, }, - /* Watchpoint Fault Address Register : should actually only be present + /* + * Watchpoint Fault Address Register : should actually only be present * for 1136, 1176, 11MPCore. */ { .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static bool event_supported(uint16_t number) static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* Performance monitor registers user accessibility is controlled + /* + * Performance monitor registers user accessibility is controlled * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable * trapping to EL2 or EL3 for other accesses. */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult pmreg_access_ccntr(CPUARMState *env, (MDCR_HPME | MDCR_HPMD | MDCR_HPMN | MDCR_HCCD | MDCR_HLP) #define MDCR_EL3_PMU_ENABLE_BITS (MDCR_SPME | MDCR_SCCD) -/* Returns true if the counter (pass 31 for PMCCNTR) should count events using +/* + * Returns true if the counter (pass 31 for PMCCNTR) should count events using * the current EL, security state, and register configuration. */ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) @@ -XXX,XX +XXX,XX @@ static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri) static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and + /* + * The value of PMSELR.SEL affects the behavior of PMXEVTYPER and * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are * accessed. @@ -XXX,XX +XXX,XX @@ static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.c14_pmevtyper[counter] = value & PMXEVTYPER_MASK; pmevcntr_op_finish(env, counter); } - /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when + /* + * Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when * PMSELR value is equal to or greater than the number of implemented * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pmevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri, } return ret; } else { - /* We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR - * are CONSTRAINED UNPREDICTABLE. */ + /* + * We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR + * are CONSTRAINED UNPREDICTABLE. + */ return 0; } } @@ -XXX,XX +XXX,XX @@ static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Note that even though the AArch64 view of this register has bits + /* + * Note that even though the AArch64 view of this register has bits * [10:0] all RES0 we can only mask the bottom 5, to comply with the * architectural requirements for bits which are RES0 only in some * contexts. (ARMv8 would permit us to do no masking at all, but ARMv7 @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (!arm_feature(env, ARM_FEATURE_EL2)) { valid_mask &= ~SCR_HCE; - /* On ARMv7, SMD (or SCD as it is called in v7) is only + /* + * On ARMv7, SMD (or SCD as it is called in v7) is only * supported if EL2 exists. The bit is UNK/SBZP when * EL2 is unavailable. In QEMU ARMv7, we force it to always zero * when EL2 is unavailable. @@ -XXX,XX +XXX,XX @@ static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); - /* Acquire the CSSELR index from the bank corresponding to the CCSIDR + /* + * Acquire the CSSELR index from the bank corresponding to the CCSIDR * bank */ uint32_t index = A32_BANKED_REG_GET(env, csselr, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { /* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */ { .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, .access = PL1_W, .type = ARM_CP_NOP }, - /* Performance monitors are implementation defined in v7, + /* + * Performance monitors are implementation defined in v7, * but with an ARM recommended set of registers, which we * follow. * @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .writefn = csselr_write, .resetvalue = 0, .bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s), offsetof(CPUARMState, cp15.csselr_ns) } }, - /* Auxiliary ID register: this actually has an IMPDEF value but for now + /* + * Auxiliary ID register: this actually has an IMPDEF value but for now * just RAZ for all cores: */ { .name = "AIDR", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid1, .resetvalue = 0 }, - /* Auxiliary fault status registers: these also are IMPDEF, and we + /* + * Auxiliary fault status registers: these also are IMPDEF, and we * choose to RAZ/WI for all cores. */ { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_CONST, .resetvalue = 0 }, - /* MAIR can just read-as-written because we don't implement caches + /* + * MAIR can just read-as-written because we don't implement caches * and so don't need to care about memory attributes. */ { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0, .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[3]), .resetvalue = 0 }, - /* For non-long-descriptor page tables these are PRRR and NMRR; + /* + * For non-long-descriptor page tables these are PRRR and NMRR; * regardless they still act as reads-as-written for QEMU. */ - /* MAIR0/1 are defined separately from their 64-bit counterpart which + /* + * MAIR0/1 are defined separately from their 64-bit counterpart which * allows them to assign the correct fieldoffset based on the endianness * handled in the field definitions. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero. + /* + * CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero. * Writable only at the highest implemented exception level. */ int el = arm_current_el(env); @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_stimer_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* The AArch64 register view of the secure physical timer is + /* + * The AArch64 register view of the secure physical timer is * always accessible from EL3, and configurably accessible from * Secure EL1. */ @@ -XXX,XX +XXX,XX @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx) ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; if (gt->ctl & 1) { - /* Timer enabled: calculate and set current ISTATUS, irq, and + /* + * Timer enabled: calculate and set current ISTATUS, irq, and * reset timer to when ISTATUS next has to change */ uint64_t offset = timeridx == GTIMER_VIRT ? @@ -XXX,XX +XXX,XX @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx) /* Next transition is when we hit cval */ nexttick = gt->cval + offset; } - /* Note that the desired next expiry time might be beyond the + /* + * Note that the desired next expiry time might be beyond the * signed-64-bit range of a QEMUTimer -- in this case we just * set the timer for as far in the future as possible. When the * timer expires we will reset the timer for any remaining period. @@ -XXX,XX +XXX,XX @@ static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Enable toggled */ gt_recalc_timer(cpu, timeridx); } else if ((oldval ^ value) & 2) { - /* IMASK toggled: don't need to recalculate, + /* + * IMASK toggled: don't need to recalculate, * just set the interrupt line based on ISTATUS */ int irqstate = (oldval & 4) && !(value & 2); @@ -XXX,XX +XXX,XX @@ static void arm_gt_cntfrq_reset(CPUARMState *env, const ARMCPRegInfo *opaque) } static const ARMCPRegInfo generic_timer_cp_reginfo[] = { - /* Note that CNTFRQ is purely reads-as-written for the benefit + /* + * Note that CNTFRQ is purely reads-as-written for the benefit * of software; writing it doesn't actually change the timer frequency. * Our reset value matches the fixed frequency we implement the timer at. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = { .readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read, .writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write, }, - /* Secure timer -- this is actually restricted to only EL3 + /* + * Secure timer -- this is actually restricted to only EL3 * and configurably Secure-EL1 via the accessfn. */ { .name = "CNTPS_TVAL_EL1", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, #else -/* In user-mode most of the generic timer registers are inaccessible +/* + * In user-mode most of the generic timer registers are inaccessible * however modern kernels (4.12+) allow access to cntvct_el0 */ @@ -XXX,XX +XXX,XX @@ static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); - /* Currently we have no support for QEMUTimer in linux-user so we + /* + * Currently we have no support for QEMUTimer in linux-user so we * can't call gt_get_countervalue(env), instead we directly * call the lower level functions. */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (ri->opc2 & 4) { - /* The ATS12NSO* operations must trap to EL3 or EL2 if executed in + /* + * The ATS12NSO* operations must trap to EL3 or EL2 if executed in * Secure EL1 (which can only happen if EL3 is AArch64). * They are simply UNDEF if executed from NS EL1. * They function normally from EL2 or EL3. @@ -XXX,XX +XXX,XX @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value, } } } else { - /* fsr is a DFSR/IFSR value for the short descriptor + /* + * fsr is a DFSR/IFSR value for the short descriptor * translation table format (with WnR always clear). * Convert it to a 32-bit PAR. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pmsav8r_cp_reginfo[] = { }; static const ARMCPRegInfo pmsav7_cp_reginfo[] = { - /* Reset for all these registers is handled in arm_cpu_reset(), + /* + * Reset for all these registers is handled in arm_cpu_reset(), * because the PMSAv7 is also used by M-profile CPUs, which do * not register cpregs but still need the state to be reset. */ @@ -XXX,XX +XXX,XX @@ static void vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri, } if (arm_feature(env, ARM_FEATURE_LPAE)) { - /* With LPAE the TTBCR could result in a change of ASID + /* + * With LPAE the TTBCR could result in a change of ASID * via the TTBCR.A1 bit, so do a TLB flush. */ tlb_flush(CPU(cpu)); @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { offsetoflow32(CPUARMState, cp15.tcr_el[1])} }, }; -/* Note that unlike TTBCR, writing to TTBCR2 does not require flushing +/* + * Note that unlike TTBCR, writing to TTBCR2 does not require flushing * qemu tlbs nor adjusting cached masks. */ static const ARMCPRegInfo ttbcr2_reginfo = { @@ -XXX,XX +XXX,XX @@ static void omap_wfi_write(CPUARMState *env, const ARMCPRegInfo *ri, static void omap_cachemaint_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* On OMAP there are registers indicating the max/min index of dcache lines + /* + * On OMAP there are registers indicating the max/min index of dcache lines * containing a dirty line; cache flush operations have to reset these. */ env->cp15.c15_i_max = 0x000; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo omap_cp_reginfo[] = { .crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW, .type = ARM_CP_NO_RAW, .readfn = arm_cp_read_zero, .writefn = omap_wfi_write, }, - /* TODO: Peripheral port remap register: + /* + * TODO: Peripheral port remap register: * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller * base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff), * when MMU is off. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo xscale_cp_reginfo[] = { .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr), .resetvalue = 0, }, - /* XScale specific cache-lockdown: since we have no cache we NOP these + /* + * XScale specific cache-lockdown: since we have no cache we NOP these * and hope the guest does not really rely on cache behaviour. */ { .name = "XSCALE_LOCK_ICACHE_LINE", @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo xscale_cp_reginfo[] = { }; static const ARMCPRegInfo dummy_c15_cp_reginfo[] = { - /* RAZ/WI the whole crn=15 space, when we don't have a more specific + /* + * RAZ/WI the whole crn=15 space, when we don't have a more specific * implementation of this implementation-defined space. * Ideally this should eventually disappear in favour of actually * implementing the correct behaviour for all cores. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { }; static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { - /* The cache test-and-clean instructions always return (1 << 30) + /* + * The cache test-and-clean instructions always return (1 << 30) * to indicate that there are no dirty cache lines. */ { .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3, @@ -XXX,XX +XXX,XX @@ static uint64_t mpidr_read_val(CPUARMState *env) if (arm_feature(env, ARM_FEATURE_V7MP)) { mpidr |= (1U << 31); - /* Cores which are uniprocessor (non-coherent) + /* + * Cores which are uniprocessor (non-coherent) * but still implement the MP extensions set * bit 30. (For instance, Cortex-R5). */ @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tocu(CPUARMState *env, const ARMCPRegInfo *ri, return do_cacheop_pou_access(env, HCR_TOCU | HCR_TPU); } -/* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions +/* + * See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions * Page D4-1736 (DDI0487A.b) */ @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Invalidate by VA, EL2 + /* + * Invalidate by VA, EL2 * Currently handles both VAE2 and VALE2, since we don't support * flush-last-level-only. */ @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Invalidate by VA, EL3 + /* + * Invalidate by VA, EL3 * Currently handles both VAE3 and VALE3, since we don't support * flush-last-level-only. */ @@ -XXX,XX +XXX,XX @@ static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - /* Invalidate by VA, EL1&0 (AArch64 version). + /* + * Invalidate by VA, EL1&0 (AArch64 version). * Currently handles all of VAE1, VAAE1, VAALE1 and VALE1, * since we don't support flush-for-specific-ASID-only or * flush-last-level-only. @@ -XXX,XX +XXX,XX @@ static CPAccessResult sp_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { if (!(env->pstate & PSTATE_SP)) { - /* Access to SP_EL0 is undefined if it's being used as + /* + * Access to SP_EL0 is undefined if it's being used as * the stack pointer. */ return CP_ACCESS_TRAP_UNCATEGORIZED; @@ -XXX,XX +XXX,XX @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, } if (raw_read(env, ri) == value) { - /* Skip the TLB flush if nothing actually changed; Linux likes + /* + * Skip the TLB flush if nothing actually changed; Linux likes * to do a lot of pointless SCTLR writes. */ return; @@ -XXX,XX +XXX,XX @@ static void mdcr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri, } static const ARMCPRegInfo v8_cp_reginfo[] = { - /* Minimal set of EL0-visible registers. This will need to be expanded + /* + * Minimal set of EL0-visible registers. This will need to be expanded * significantly for system emulation of AArch64 CPUs. */ { .name = "NZCV", .state = ARM_CP_STATE_AA64, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 0, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_SVC]) }, - /* We rely on the access checks not allowing the guest to write to the + /* + * We rely on the access checks not allowing the guest to write to the * state field when SPSel indicates that it's being used as the stack * pointer. */ @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (arm_feature(env, ARM_FEATURE_EL3)) { valid_mask &= ~HCR_HCD; } else if (cpu->psci_conduit != QEMU_PSCI_CONDUIT_SMC) { - /* Architecturally HCR.TSC is RES0 if EL3 is not implemented. + /* + * Architecturally HCR.TSC is RES0 if EL3 is not implemented. * However, if we're using the SMC PSCI conduit then QEMU is * effectively acting like EL3 firmware and so the guest at * EL2 should retain the ability to prevent EL1 from being @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, #ifndef CONFIG_USER_ONLY - /* Unlike the other EL2-related AT operations, these must + /* + * Unlike the other EL2-related AT operations, these must * UNDEF from EL3 if EL2 is not implemented, which is why we * define them here rather than with the rest of the AT ops. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .access = PL2_W, .accessfn = at_s1e2_access, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = ats_write64 }, - /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE + /* + * The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3 * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose * to behave as if SCR.NS was 1. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, - /* ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the + /* + * ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the * reset values as IMPDEF. We choose to reset to 3 to comply with * both ARMv7 and ARMv8. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_sec_cp_reginfo[] = { static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { - /* The NSACR is RW at EL3, and RO for NS EL1 and NS EL2. + /* + * The NSACR is RW at EL3, and RO for NS EL1 and NS EL2. * At Secure EL1 it traps to EL3 or EL2. */ if (arm_current_el(env) == 3) { @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } -/* We don't know until after realize whether there's a GICv3 +/* + * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. * So we have to fill in the GIC fields in ID_PFR/ID_PFR1_EL1/ID_AA64PFR0_EL1 * at runtime. @@ -XXX,XX +XXX,XX @@ static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) } #endif -/* Shared logic between LORID and the rest of the LOR* registers. +/* + * Shared logic between LORID and the rest of the LOR* registers. * Secure state exclusion has already been dealt with. */ static CPAccessResult access_lor_ns(CPUARMState *env, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, cp_reginfo); if (!arm_feature(env, ARM_FEATURE_V8)) { - /* Must go early as it is full of wildcards that may be + /* + * Must go early as it is full of wildcards that may be * overridden by later definitions. */ define_arm_cp_regs(cpu, not_v8_cp_reginfo); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa32_tid3, .resetvalue = cpu->isar.id_pfr0 }, - /* ID_PFR1 is not a plain ARM_CP_CONST because we don't know + /* + * ID_PFR1 is not a plain ARM_CP_CONST because we don't know * the value of the GIC field until after we define these regs. */ { .name = "ID_PFR1", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, el3_regs); } - /* The behaviour of NSACR is sufficiently various that we don't + /* + * The behaviour of NSACR is sufficiently various that we don't * try to describe it in a single reginfo: * if EL3 is 64 bit, then trap to EL3 from S EL1, * reads as constant 0xc00 from NS EL1 and NS EL2 @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa32_jazelle, cpu)) { define_arm_cp_regs(cpu, jazelle_regs); } - /* Slightly awkwardly, the OMAP and StrongARM cores need all of + /* + * Slightly awkwardly, the OMAP and StrongARM cores need all of * cp15 crn=0 to be writes-ignored, whereas for other cores they should * be read-only (ie write causes UNDEF exception). */ { ARMCPRegInfo id_pre_v8_midr_cp_reginfo[] = { - /* Pre-v8 MIDR space. + /* + * Pre-v8 MIDR space. * Note that the MIDR isn't a simple constant register because * of the TI925 behaviour where writes to another register can * cause the MIDR value to change. @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (arm_feature(env, ARM_FEATURE_OMAPCP) || arm_feature(env, ARM_FEATURE_STRONGARM)) { size_t i; - /* Register the blanket "writes ignored" value first to cover the + /* + * Register the blanket "writes ignored" value first to cover the * whole space. Then update the specific ID registers to allow write * access, so that they ignore writes rather than causing them to * UNDEF. @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .raw_writefn = raw_write, }; if (arm_feature(env, ARM_FEATURE_XSCALE)) { - /* Normally we would always end the TB on an SCTLR write, but Linux + /* + * Normally we would always end the TB on an SCTLR write, but Linux * arch/arm/mach-pxa/sleep.S expects two instructions following * an MMU enable to execute from cache. Imitate this behaviour. */ @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, const ARMCPRegInfo *r, void *opaque) { - /* Define implementations of coprocessor registers. + /* + * Define implementations of coprocessor registers. * We store these in a hashtable because typically * there are less than 150 registers in a space which * is 16*16*16*8*8 = 262144 in size. @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, default: g_assert_not_reached(); } - /* The AArch64 pseudocode CheckSystemAccess() specifies that op1 + /* + * The AArch64 pseudocode CheckSystemAccess() specifies that op1 * encodes a minimum access level for the register. We roll this * runtime check into our general permission check code, so check * here that the reginfo's specified permissions are strict enough @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, assert((r->access & ~mask) == 0); } - /* Check that the register definition has enough info to handle + /* + * Check that the register definition has enough info to handle * reads and writes if they are permitted. */ if (!(r->type & (ARM_CP_SPECIAL_MASK | ARM_CP_CONST))) { @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, continue; } if (state == ARM_CP_STATE_AA32) { - /* Under AArch32 CP registers can be common + /* + * Under AArch32 CP registers can be common * (same for secure and non-secure world) or banked. */ char *name; @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, g_assert_not_reached(); } } else { - /* AArch64 registers get mapped to non-secure instance - * of AArch32 */ + /* + * AArch64 registers get mapped to non-secure instance + * of AArch32 + */ add_cpreg_to_hashtable(cpu, r, opaque, state, ARM_CP_SECSTATE_NS, crm, opc1, opc2, r->name); @@ -XXX,XX +XXX,XX @@ void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque) static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) { - /* Return true if it is not valid for us to switch to + /* + * Return true if it is not valid for us to switch to * this CPU mode (ie all the UNPREDICTABLE cases in * the ARM ARM CPSRWriteByInstr pseudocode). */ @@ -XXX,XX +XXX,XX @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) case ARM_CPU_MODE_UND: case ARM_CPU_MODE_IRQ: case ARM_CPU_MODE_FIQ: - /* Note that we don't implement the IMPDEF NSACR.RFR which in v7 + /* + * Note that we don't implement the IMPDEF NSACR.RFR which in v7 * allows FIQ mode to be Secure-only. (In v8 this doesn't exist.) */ - /* If HCR.TGE is set then changes from Monitor to NS PL1 via MSR + /* + * If HCR.TGE is set then changes from Monitor to NS PL1 via MSR * and CPS are treated as illegal mode changes. */ if (write_type == CPSRWriteByInstr && @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, env->GE = (val >> 16) & 0xf; } - /* In a V7 implementation that includes the security extensions but does + /* + * In a V7 implementation that includes the security extensions but does * not include Virtualization Extensions the SCR.FW and SCR.AW bits control * whether non-secure software is allowed to change the CPSR_F and CPSR_A * bits respectively. @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, changed_daif = (env->daif ^ val) & mask; if (changed_daif & CPSR_A) { - /* Check to see if we are allowed to change the masking of async + /* + * Check to see if we are allowed to change the masking of async * abort exceptions from a non-secure state. */ if (!(env->cp15.scr_el3 & SCR_AW)) { @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, } if (changed_daif & CPSR_F) { - /* Check to see if we are allowed to change the masking of FIQ + /* + * Check to see if we are allowed to change the masking of FIQ * exceptions from a non-secure state. */ if (!(env->cp15.scr_el3 & SCR_FW)) { @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, mask &= ~CPSR_F; } - /* Check whether non-maskable FIQ (NMFI) support is enabled. + /* + * Check whether non-maskable FIQ (NMFI) support is enabled. * If this bit is set software is not allowed to mask * FIQs, but is allowed to set CPSR_F to 0. */ @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, if (write_type != CPSRWriteRaw && ((env->uncached_cpsr ^ val) & mask & CPSR_M)) { if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR) { - /* Note that we can only get here in USR mode if this is a + /* + * Note that we can only get here in USR mode if this is a * gdb stub write; for this case we follow the architectural * behaviour for guest writes in USR mode of ignoring an attempt * to switch mode. (Those are caught by translate.c for writes @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, */ mask &= ~CPSR_M; } else if (bad_mode_switch(env, val & CPSR_M, write_type)) { - /* Attempt to switch to an invalid mode: this is UNPREDICTABLE in + /* + * Attempt to switch to an invalid mode: this is UNPREDICTABLE in * v7, and has defined behaviour in v8: * + leave CPSR.M untouched * + allow changes to the other CPSR fields @@ -XXX,XX +XXX,XX @@ static void switch_mode(CPUARMState *env, int mode) env->regs[14] = env->banked_r14[r14_bank_number(mode)]; } -/* Physical Interrupt Target EL Lookup Table +/* + * Physical Interrupt Target EL Lookup Table * * [ From ARM ARM section G1.13.4 (Table G1-15) ] * @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, if (arm_feature(env, ARM_FEATURE_EL3)) { rw = ((env->cp15.scr_el3 & SCR_RW) == SCR_RW); } else { - /* Either EL2 is the highest EL (and so the EL2 register width + /* + * Either EL2 is the highest EL (and so the EL2 register width * is given by is64); or there is no EL2 or EL3, in which case * the value of 'rw' does not affect the table lookup anyway. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env) env->banked_r13[bank_number(ARM_CPU_MODE_UND)] = env->xregs[23]; } - /* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ + /* + * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ * mode, then we can copy to r8-r14. Otherwise, we copy to the * FIQ bank for r8-r14. */ @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) /* High vectors. When enabled, base address cannot be remapped. */ addr += 0xffff0000; } else { - /* ARM v7 architectures provide a vector base address register to remap + /* + * ARM v7 architectures provide a vector base address register to remap * the interrupt vector table. * This register is only followed in non-monitor mode, and is banked. * Note: only bits 31:5 are valid. @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); if (cur_el < new_el) { - /* Entry vector offset depends on whether the implemented EL + /* + * Entry vector offset depends on whether the implemented EL * immediately lower than the target level is using AArch32 or AArch64 */ bool is_aa64; @@ -XXX,XX +XXX,XX @@ static void handle_semihosting(CPUState *cs) } #endif -/* Handle a CPU exception for A and R profile CPUs. +/* + * Handle a CPU exception for A and R profile CPUs. * Do any appropriate logging, handle PSCI calls, and then hand off * to the AArch64-entry or AArch32-entry function depending on the * target exception level's register width. @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) } #endif - /* Hooks may change global state so BQL should be held, also the + /* + * Hooks may change global state so BQL should be held, also the * BQL needs to be held for any modification of * cs->interrupt_request. */ @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, }; } -/* Note that signed overflow is undefined in C. The following routines are - careful to use unsigned types where modulo arithmetic is required. - Failure to do so _will_ break on newer gcc. */ +/* + * Note that signed overflow is undefined in C. The following routines are + * careful to use unsigned types where modulo arithmetic is required. + * Failure to do so _will_ break on newer gcc. + */ /* Signed saturating arithmetic. */ @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b) return (a & mask) | (b & ~mask); } -/* CRC helpers. +/* + * CRC helpers. * The upper bytes of val (above the number specified by 'bytes') must have * been zeroed out by the caller. */ @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(crc32c)(uint32_t acc, uint32_t val, uint32_t bytes) return crc32c(acc, buf, bytes) ^ 0xffffffff; } -/* Return the exception level to which FP-disabled exceptions should +/* + * Return the exception level to which FP-disabled exceptions should * be taken, or 0 if FP is enabled. */ int fp_exception_el(CPUARMState *env, int cur_el) @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) #ifndef CONFIG_USER_ONLY uint64_t hcr_el2; - /* CPACR and the CPTR registers don't exist before v6, so FP is + /* + * CPACR and the CPTR registers don't exist before v6, so FP is * always accessible */ if (!arm_feature(env, ARM_FEATURE_V6)) { @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) hcr_el2 = arm_hcr_el2_eff(env); - /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: + /* + * The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses * 3 : trap no accesses -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Fix the following: ERROR: spaces required around that '|' (ctx:VxV) ERROR: space required before the open parenthesis '(' ERROR: spaces required around that '+' (ctx:VxB) ERROR: space prohibited between function name and open parenthesis '(' (the last two still have some occurrences in macros which I left behind because it might impact readability) Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-3-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_list(gpointer key, gpointer opaque) uint32_t regidx = (uintptr_t)key; const ARMCPRegInfo *ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); - if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { + if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) { cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx); /* The value array need not be initialized at this point */ cpu->cpreg_array_len++; @@ -XXX,XX +XXX,XX @@ static void count_cpreg(gpointer key, gpointer opaque) ri = g_hash_table_lookup(cpu->cp_regs, key); - if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { + if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) { cpu->cpreg_array_len++; } } @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { .resetfn = arm_cp_reset_ignore }, { .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0, - .access = PL0_R|PL1_W, + .access = PL0_R | PL1_W, .fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el[0]), .resetvalue = 0}, { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3, - .access = PL0_R|PL1_W, + .access = PL0_R | PL1_W, .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidruro_s), offsetoflow32(CPUARMState, cp15.tpidruro_ns) }, .resetfn = arm_cp_reset_ignore }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { .resetvalue = 0 }, /* The cache ops themselves: these all NOP for QEMU */ { .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0, - .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0, - .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0, - .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1, - .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2, - .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, { .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0, - .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, + .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, }; static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) ARMCPRegInfo cbar = { .name = "CBAR", .cp = 15, .crn = 15, .crm = 0, .opc1 = 4, .opc2 = 0, - .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar, + .access = PL1_R | PL3_W, .resetvalue = cpu->reset_cbar, .fieldoffset = offsetof(CPUARMState, cp15.c15_config_base_address) }; @@ -XXX,XX +XXX,XX @@ static void switch_mode(CPUARMState *env, int mode) return; if (old_mode == ARM_CPU_MODE_FIQ) { - memcpy (env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); - memcpy (env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t)); + memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); + memcpy(env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t)); } else if (mode == ARM_CPU_MODE_FIQ) { - memcpy (env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t)); - memcpy (env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t)); + memcpy(env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t)); + memcpy(env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t)); } i = bank_number(old_mode); @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 16); \ if (sum >= 0) \ ge |= 3 << (n * 2); \ - } while(0) + } while (0) #define SARITH8(a, b, n, op) do { \ int32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 8); \ if (sum >= 0) \ ge |= 1 << n; \ - } while(0) + } while (0) #define ADD16(a, b, n) SARITH16(a, b, n, +) @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 16); \ if ((sum >> 16) == 1) \ ge |= 3 << (n * 2); \ - } while(0) + } while (0) #define ADD8(a, b, n) do { \ uint32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 8); \ if ((sum >> 8) == 1) \ ge |= 1 << n; \ - } while(0) + } while (0) #define SUB16(a, b, n) do { \ uint32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 16); \ if ((sum >> 16) == 0) \ ge |= 3 << (n * 2); \ - } while(0) + } while (0) #define SUB8(a, b, n) do { \ uint32_t sum; \ @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) RESULT(sum, n, 8); \ if ((sum >> 8) == 0) \ ge |= 1 << n; \ - } while(0) + } while (0) #define PFX u #define ARITH_GE -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Fix this: ERROR: braces {} are necessary for all arms of this statement Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-4-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 67 ++++++++++++++++++++++++++++----------------- 1 file changed, 42 insertions(+), 25 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, env->CF = (val >> 29) & 1; env->VF = (val << 3) & 0x80000000; } - if (mask & CPSR_Q) + if (mask & CPSR_Q) { env->QF = ((val & CPSR_Q) != 0); - if (mask & CPSR_T) + } + if (mask & CPSR_T) { env->thumb = ((val & CPSR_T) != 0); + } if (mask & CPSR_IT_0_1) { env->condexec_bits &= ~3; env->condexec_bits |= (val >> 25) & 3; @@ -XXX,XX +XXX,XX @@ static void switch_mode(CPUARMState *env, int mode) int i; old_mode = env->uncached_cpsr & CPSR_M; - if (mode == old_mode) + if (mode == old_mode) { return; + } if (old_mode == ARM_CPU_MODE_FIQ) { memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) new_mode = ARM_CPU_MODE_UND; addr = 0x04; mask = CPSR_I; - if (env->thumb) + if (env->thumb) { offset = 2; - else + } else { offset = 4; + } break; case EXCP_SWI: new_mode = ARM_CPU_MODE_SVC; @@ -XXX,XX +XXX,XX @@ static inline uint16_t add16_sat(uint16_t a, uint16_t b) res = a + b; if (((res ^ a) & 0x8000) && !((a ^ b) & 0x8000)) { - if (a & 0x8000) + if (a & 0x8000) { res = 0x8000; - else + } else { res = 0x7fff; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint8_t add8_sat(uint8_t a, uint8_t b) res = a + b; if (((res ^ a) & 0x80) && !((a ^ b) & 0x80)) { - if (a & 0x80) + if (a & 0x80) { res = 0x80; - else + } else { res = 0x7f; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint16_t sub16_sat(uint16_t a, uint16_t b) res = a - b; if (((res ^ a) & 0x8000) && ((a ^ b) & 0x8000)) { - if (a & 0x8000) + if (a & 0x8000) { res = 0x8000; - else + } else { res = 0x7fff; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_sat(uint8_t a, uint8_t b) res = a - b; if (((res ^ a) & 0x80) && ((a ^ b) & 0x80)) { - if (a & 0x80) + if (a & 0x80) { res = 0x80; - else + } else { res = 0x7f; + } } return res; } @@ -XXX,XX +XXX,XX @@ static inline uint16_t add16_usat(uint16_t a, uint16_t b) { uint16_t res; res = a + b; - if (res < a) + if (res < a) { res = 0xffff; + } return res; } static inline uint16_t sub16_usat(uint16_t a, uint16_t b) { - if (a > b) + if (a > b) { return a - b; - else + } else { return 0; + } } static inline uint8_t add8_usat(uint8_t a, uint8_t b) { uint8_t res; res = a + b; - if (res < a) + if (res < a) { res = 0xff; + } return res; } static inline uint8_t sub8_usat(uint8_t a, uint8_t b) { - if (a > b) + if (a > b) { return a - b; - else + } else { return 0; + } } #define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16); @@ -XXX,XX +XXX,XX @@ static inline uint8_t sub8_usat(uint8_t a, uint8_t b) static inline uint8_t do_usad(uint8_t a, uint8_t b) { - if (a > b) + if (a > b) { return a - b; - else + } else { return b - a; + } } /* Unsigned sum of absolute byte differences. */ @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b) uint32_t mask; mask = 0; - if (flags & 1) + if (flags & 1) { mask |= 0xff; - if (flags & 2) + } + if (flags & 2) { mask |= 0xff00; - if (flags & 4) + } + if (flags & 4) { mask |= 0xff0000; - if (flags & 8) + } + if (flags & 8) { mask |= 0xff000000; + } return (a & mask) | (b & ~mask); } -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-5-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/units.h" -#include "target/arm/idau.h" -#include "trace.h" #include "cpu.h" #include "internals.h" -#include "exec/gdbstub.h" #include "exec/helper-proto.h" -#include "qemu/host-utils.h" #include "qemu/main-loop.h" #include "qemu/bitops.h" -#include "qemu/crc32c.h" -#include "qemu/qemu-print.h" #include "qemu/log.h" #include "exec/exec-all.h" -#include <zlib.h> /* For crc32 */ -#include "semihosting/semihost.h" -#include "sysemu/cpus.h" -#include "sysemu/kvm.h" -#include "qemu/range.h" -#include "qapi/qapi-commands-machine-target.h" -#include "qapi/error.h" -#include "qemu/guest-random.h" #ifdef CONFIG_TCG -#include "arm_ldst.h" #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif -- 2.25.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20221213190537.511-6-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/units.h" #include "qemu/log.h" #include "trace.h" #include "cpu.h" #include "internals.h" #include "exec/helper-proto.h" -#include "qemu/host-utils.h" #include "qemu/main-loop.h" #include "qemu/timer.h" #include "qemu/bitops.h" @@ -XXX,XX +XXX,XX @@ #include "exec/exec-all.h" #include <zlib.h> /* For crc32 */ #include "hw/irq.h" -#include "semihosting/semihost.h" -#include "sysemu/cpus.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" -#include "qemu/range.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" #ifdef CONFIG_TCG -#include "arm_ldst.h" -#include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif #include "cpregs.h" -- 2.25.1 From: Claudio Fontana <cfontana@suse.de> Remove some unused headers. Signed-off-by: Claudio Fontana <cfontana@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Message-id: 20221213190537.511-7-farosas@suse.de [added back some includes that are still needed at this point] Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 - target/arm/cpu64.c | 6 ------ 2 files changed, 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #include "target/arm/idau.h" #include "qemu/module.h" #include "qapi/error.h" -#include "qapi/visitor.h" #include "cpu.h" #ifdef CONFIG_TCG #include "hw/core/tcg-cpu-ops.h" diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "cpu.h" -#ifdef CONFIG_TCG -#include "hw/core/tcg-cpu-ops.h" -#endif /* CONFIG_TCG */ #include "qemu/module.h" -#if !defined(CONFIG_USER_ONLY) -#include "hw/loader.h" -#endif #include "sysemu/kvm.h" #include "sysemu/hvf.h" #include "kvm_arm.h" -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The pointed MouseTransformInfo structure is accessed read-only. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/input/tsc2xxx.h | 4 ++-- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 3 +-- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/input/tsc2xxx.h +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ uWireSlave *tsc2102_init(qemu_irq pint); uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); I2SCodec *tsc210x_codec(uWireSlave *chip); uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info); void tsc210x_key_event(uWireSlave *chip, int key, int down); /* tsc2005.c */ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); +void tsc2005_set_transform(void *opaque, const MouseTransformInfo *info); #endif diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav) * from the touchscreen. Assuming 12-bit precision was used during * tslib calibration. */ -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info) +void tsc2005_set_transform(void *opaque, const MouseTransformInfo *info) { TSC2005State *s = (TSC2005State *) opaque; diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ I2SCodec *tsc210x_codec(uWireSlave *chip) * from the touchscreen. Assuming 12-bit precision was used during * tslib calibration. */ -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info) +void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info) { TSC210xState *s = (TSC210xState *) chip->opaque; #if 0 -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) } /* Touchscreen and keypad controller */ -static MouseTransformInfo n800_pointercal = { +static const MouseTransformInfo n800_pointercal = { .x = 800, .y = 480, .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 }, }; -static MouseTransformInfo n810_pointercal = { +static const MouseTransformInfo n810_pointercal = { .x = 800, .y = 480, .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 }, @@ -XXX,XX +XXX,XX @@ static void n810_key_event(void *opaque, int keycode) #define M 0 -static int n810_keys[0x80] = { +static const int n810_keys[0x80] = { [0x01] = 16, /* Q */ [0x02] = 37, /* K */ [0x03] = 24, /* O */ @@ -XXX,XX +XXX,XX @@ static void n8x0_usb_setup(struct n800_s *s) /* Setup done before the main bootloader starts by some early setup code * - used when we want to run the main bootloader in emulation. This * isn't documented. */ -static uint32_t n800_pinout[104] = { +static const uint32_t n800_pinout[104] = { 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0, 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808, 0x08080808, 0x180800c4, 0x00b80000, 0x08080808, @@ -XXX,XX +XXX,XX @@ static void n8x0_boot_init(void *opaque) #define OMAP_TAG_CBUS 0x4e03 #define OMAP_TAG_EM_ASIC_BB5 0x4e04 -static struct omap_gpiosw_info_s { +static const struct omap_gpiosw_info_s { const char *name; int line; int type; @@ -XXX,XX +XXX,XX @@ static struct omap_gpiosw_info_s { { NULL } }; -static struct omap_partition_info_s { +static const struct omap_partition_info_s { uint32_t offset; uint32_t size; int mask; @@ -XXX,XX +XXX,XX @@ static struct omap_partition_info_s { { 0, 0, 0, NULL } }; -static uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; +static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; static int n8x0_atag_setup(void *p, int model) { uint8_t *b; uint16_t *w; uint32_t *l; - struct omap_gpiosw_info_s *gpiosw; - struct omap_partition_info_s *partition; + const struct omap_gpiosw_info_s *gpiosw; + const struct omap_partition_info_s *partition; const char *tag; w = p; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Silent when compiling with -Wextra: ../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers] { NULL } ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221220142520.24094-4-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ static const struct omap_gpiosw_info_s { "headphone", N8X0_HEADPHONE_GPIO, OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, }, - { NULL } + { /* end of list */ } }, n810_gpiosw_info[] = { { "gps_reset", N810_GPS_RESET_GPIO, @@ -XXX,XX +XXX,XX @@ static const struct omap_gpiosw_info_s { "slide", N810_SLIDE_GPIO, OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, }, - { NULL } + { /* end of list */ } }; static const struct omap_partition_info_s { @@ -XXX,XX +XXX,XX @@ static const struct omap_partition_info_s { { 0x00080000, 0x00200000, 0x0, "kernel" }, { 0x00280000, 0x00200000, 0x3, "initfs" }, { 0x00480000, 0x0fb80000, 0x3, "rootfs" }, - - { 0, 0, 0, NULL } + { /* end of list */ } }, n810_part_info[] = { { 0x00000000, 0x00020000, 0x3, "bootloader" }, { 0x00020000, 0x00060000, 0x0, "config" }, { 0x00080000, 0x00220000, 0x0, "kernel" }, { 0x002a0000, 0x00400000, 0x0, "initfs" }, { 0x006a0000, 0x0f960000, 0x0, "rootfs" }, - - { 0, 0, 0, NULL } + { /* end of list */ } }; static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; -- 2.25.1 From: Zhuojia Shen <chaosdefinition@hotmail.com> In CPUID registers exposed to userspace, some registers were missing and some fields were not exposed. This patch aligns exposed ID registers and their fields with what the upstream kernel currently exposes. Specifically, the following new ID registers/fields are exposed to userspace: ID_AA64PFR1_EL1.BT: bits 3-0 ID_AA64PFR1_EL1.MTE: bits 11-8 ID_AA64PFR1_EL1.SME: bits 27-24 ID_AA64ZFR0_EL1.SVEver: bits 3-0 ID_AA64ZFR0_EL1.AES: bits 7-4 ID_AA64ZFR0_EL1.BitPerm: bits 19-16 ID_AA64ZFR0_EL1.BF16: bits 23-20 ID_AA64ZFR0_EL1.SHA3: bits 35-32 ID_AA64ZFR0_EL1.SM4: bits 43-40 ID_AA64ZFR0_EL1.I8MM: bits 47-44 ID_AA64ZFR0_EL1.F32MM: bits 55-52 ID_AA64ZFR0_EL1.F64MM: bits 59-56 ID_AA64SMFR0_EL1.F32F32: bit 32 ID_AA64SMFR0_EL1.B16F32: bit 34 ID_AA64SMFR0_EL1.F16F32: bit 35 ID_AA64SMFR0_EL1.I8I32: bits 39-36 ID_AA64SMFR0_EL1.F64F64: bit 48 ID_AA64SMFR0_EL1.I16I64: bits 55-52 ID_AA64SMFR0_EL1.FA64: bit 63 ID_AA64MMFR0_EL1.ECV: bits 63-60 ID_AA64MMFR1_EL1.AFP: bits 47-44 ID_AA64MMFR2_EL1.AT: bits 35-32 ID_AA64ISAR0_EL1.RNDR: bits 63-60 ID_AA64ISAR1_EL1.FRINTTS: bits 35-32 ID_AA64ISAR1_EL1.BF16: bits 47-44 ID_AA64ISAR1_EL1.DGH: bits 51-48 ID_AA64ISAR1_EL1.I8MM: bits 55-52 ID_AA64ISAR2_EL1.WFxT: bits 3-0 ID_AA64ISAR2_EL1.RPRES: bits 7-4 ID_AA64ISAR2_EL1.GPA3: bits 11-8 ID_AA64ISAR2_EL1.APA3: bits 15-12 The code is also refactored to use symbolic names for ID register fields for better readability and maintainability. The test case in tests/tcg/aarch64/sysregs.c is also updated to match the intended behavior. Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com> Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 96 +++++++++++++++++++++++++------ tests/tcg/aarch64/sysregs.c | 24 ++++++-- tests/tcg/aarch64/Makefile.target | 7 ++- 3 files changed, 103 insertions(+), 24 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) #ifdef CONFIG_USER_ONLY static const ARMCPRegUserSpaceInfo v8_user_idregs[] = { { .name = "ID_AA64PFR0_EL1", - .exported_bits = 0x000f000f00ff0000, - .fixed_bits = 0x0000000000000011 }, + .exported_bits = R_ID_AA64PFR0_FP_MASK | + R_ID_AA64PFR0_ADVSIMD_MASK | + R_ID_AA64PFR0_SVE_MASK | + R_ID_AA64PFR0_DIT_MASK, + .fixed_bits = (0x1u << R_ID_AA64PFR0_EL0_SHIFT) | + (0x1u << R_ID_AA64PFR0_EL1_SHIFT) }, { .name = "ID_AA64PFR1_EL1", - .exported_bits = 0x00000000000000f0 }, + .exported_bits = R_ID_AA64PFR1_BT_MASK | + R_ID_AA64PFR1_SSBS_MASK | + R_ID_AA64PFR1_MTE_MASK | + R_ID_AA64PFR1_SME_MASK }, { .name = "ID_AA64PFR*_EL1_RESERVED", - .is_glob = true }, - { .name = "ID_AA64ZFR0_EL1" }, + .is_glob = true }, + { .name = "ID_AA64ZFR0_EL1", + .exported_bits = R_ID_AA64ZFR0_SVEVER_MASK | + R_ID_AA64ZFR0_AES_MASK | + R_ID_AA64ZFR0_BITPERM_MASK | + R_ID_AA64ZFR0_BFLOAT16_MASK | + R_ID_AA64ZFR0_SHA3_MASK | + R_ID_AA64ZFR0_SM4_MASK | + R_ID_AA64ZFR0_I8MM_MASK | + R_ID_AA64ZFR0_F32MM_MASK | + R_ID_AA64ZFR0_F64MM_MASK }, + { .name = "ID_AA64SMFR0_EL1", + .exported_bits = R_ID_AA64SMFR0_F32F32_MASK | + R_ID_AA64SMFR0_B16F32_MASK | + R_ID_AA64SMFR0_F16F32_MASK | + R_ID_AA64SMFR0_I8I32_MASK | + R_ID_AA64SMFR0_F64F64_MASK | + R_ID_AA64SMFR0_I16I64_MASK | + R_ID_AA64SMFR0_FA64_MASK }, { .name = "ID_AA64MMFR0_EL1", - .fixed_bits = 0x00000000ff000000 }, - { .name = "ID_AA64MMFR1_EL1" }, + .exported_bits = R_ID_AA64MMFR0_ECV_MASK, + .fixed_bits = (0xfu << R_ID_AA64MMFR0_TGRAN64_SHIFT) | + (0xfu << R_ID_AA64MMFR0_TGRAN4_SHIFT) }, + { .name = "ID_AA64MMFR1_EL1", + .exported_bits = R_ID_AA64MMFR1_AFP_MASK }, + { .name = "ID_AA64MMFR2_EL1", + .exported_bits = R_ID_AA64MMFR2_AT_MASK }, { .name = "ID_AA64MMFR*_EL1_RESERVED", - .is_glob = true }, + .is_glob = true }, { .name = "ID_AA64DFR0_EL1", - .fixed_bits = 0x0000000000000006 }, - { .name = "ID_AA64DFR1_EL1" }, + .fixed_bits = (0x6u << R_ID_AA64DFR0_DEBUGVER_SHIFT) }, + { .name = "ID_AA64DFR1_EL1" }, { .name = "ID_AA64DFR*_EL1_RESERVED", - .is_glob = true }, + .is_glob = true }, { .name = "ID_AA64AFR*", - .is_glob = true }, + .is_glob = true }, { .name = "ID_AA64ISAR0_EL1", - .exported_bits = 0x00fffffff0fffff0 }, + .exported_bits = R_ID_AA64ISAR0_AES_MASK | + R_ID_AA64ISAR0_SHA1_MASK | + R_ID_AA64ISAR0_SHA2_MASK | + R_ID_AA64ISAR0_CRC32_MASK | + R_ID_AA64ISAR0_ATOMIC_MASK | + R_ID_AA64ISAR0_RDM_MASK | + R_ID_AA64ISAR0_SHA3_MASK | + R_ID_AA64ISAR0_SM3_MASK | + R_ID_AA64ISAR0_SM4_MASK | + R_ID_AA64ISAR0_DP_MASK | + R_ID_AA64ISAR0_FHM_MASK | + R_ID_AA64ISAR0_TS_MASK | + R_ID_AA64ISAR0_RNDR_MASK }, { .name = "ID_AA64ISAR1_EL1", - .exported_bits = 0x000000f0ffffffff }, + .exported_bits = R_ID_AA64ISAR1_DPB_MASK | + R_ID_AA64ISAR1_APA_MASK | + R_ID_AA64ISAR1_API_MASK | + R_ID_AA64ISAR1_JSCVT_MASK | + R_ID_AA64ISAR1_FCMA_MASK | + R_ID_AA64ISAR1_LRCPC_MASK | + R_ID_AA64ISAR1_GPA_MASK | + R_ID_AA64ISAR1_GPI_MASK | + R_ID_AA64ISAR1_FRINTTS_MASK | + R_ID_AA64ISAR1_SB_MASK | + R_ID_AA64ISAR1_BF16_MASK | + R_ID_AA64ISAR1_DGH_MASK | + R_ID_AA64ISAR1_I8MM_MASK }, + { .name = "ID_AA64ISAR2_EL1", + .exported_bits = R_ID_AA64ISAR2_WFXT_MASK | + R_ID_AA64ISAR2_RPRES_MASK | + R_ID_AA64ISAR2_GPA3_MASK | + R_ID_AA64ISAR2_APA3_MASK }, { .name = "ID_AA64ISAR*_EL1_RESERVED", - .is_glob = true }, + .is_glob = true }, }; modify_arm_cp_regs(v8_idregs, v8_user_idregs); #endif @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) #ifdef CONFIG_USER_ONLY static const ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo[] = { { .name = "MIDR_EL1", - .exported_bits = 0x00000000ffffffff }, - { .name = "REVIDR_EL1" }, + .exported_bits = R_MIDR_EL1_REVISION_MASK | + R_MIDR_EL1_PARTNUM_MASK | + R_MIDR_EL1_ARCHITECTURE_MASK | + R_MIDR_EL1_VARIANT_MASK | + R_MIDR_EL1_IMPLEMENTER_MASK }, + { .name = "REVIDR_EL1" }, }; modify_arm_cp_regs(id_v8_midr_cp_reginfo, id_v8_user_midr_cp_reginfo); #endif diff --git a/tests/tcg/aarch64/sysregs.c b/tests/tcg/aarch64/sysregs.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/sysregs.c +++ b/tests/tcg/aarch64/sysregs.c @@ -XXX,XX +XXX,XX @@ #define HWCAP_CPUID (1 << 11) #endif +/* + * Older assemblers don't recognize newer system register names, + * but we can still access them by the Sn_n_Cn_Cn_n syntax. + */ +#define SYS_ID_AA64ISAR2_EL1 S3_0_C0_C6_2 +#define SYS_ID_AA64MMFR2_EL1 S3_0_C0_C7_2 + int failed_bit_count; /* Read and print system register `id' value */ @@ -XXX,XX +XXX,XX @@ int main(void) * minimum valid fields - for the purposes of this check allowed * to have non-zero values. */ - get_cpu_reg_check_mask(id_aa64isar0_el1, _m(00ff,ffff,f0ff,fff0)); - get_cpu_reg_check_mask(id_aa64isar1_el1, _m(0000,00f0,ffff,ffff)); + get_cpu_reg_check_mask(id_aa64isar0_el1, _m(f0ff,ffff,f0ff,fff0)); + get_cpu_reg_check_mask(id_aa64isar1_el1, _m(00ff,f0ff,ffff,ffff)); + get_cpu_reg_check_mask(SYS_ID_AA64ISAR2_EL1, _m(0000,0000,0000,ffff)); /* TGran4 & TGran64 as pegged to -1 */ - get_cpu_reg_check_mask(id_aa64mmfr0_el1, _m(0000,0000,ff00,0000)); - get_cpu_reg_check_zero(id_aa64mmfr1_el1); + get_cpu_reg_check_mask(id_aa64mmfr0_el1, _m(f000,0000,ff00,0000)); + get_cpu_reg_check_mask(id_aa64mmfr1_el1, _m(0000,f000,0000,0000)); + get_cpu_reg_check_mask(SYS_ID_AA64MMFR2_EL1, _m(0000,000f,0000,0000)); /* EL1/EL0 reported as AA64 only */ get_cpu_reg_check_mask(id_aa64pfr0_el1, _m(000f,000f,00ff,0011)); - get_cpu_reg_check_mask(id_aa64pfr1_el1, _m(0000,0000,0000,00f0)); + get_cpu_reg_check_mask(id_aa64pfr1_el1, _m(0000,0000,0f00,0fff)); /* all hidden, DebugVer fixed to 0x6 (ARMv8 debug architecture) */ get_cpu_reg_check_mask(id_aa64dfr0_el1, _m(0000,0000,0000,0006)); get_cpu_reg_check_zero(id_aa64dfr1_el1); - get_cpu_reg_check_zero(id_aa64zfr0_el1); + get_cpu_reg_check_mask(id_aa64zfr0_el1, _m(0ff0,ff0f,00ff,00ff)); +#ifdef HAS_ARMV9_SME + get_cpu_reg_check_mask(id_aa64smfr0_el1, _m(80f1,00fd,0000,0000)); +#endif get_cpu_reg_check_zero(id_aa64afr0_el1); get_cpu_reg_check_zero(id_aa64afr1_el1); diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ config-cc.mak: Makefile $(call cc-option,-march=armv8.1-a+sve2, CROSS_CC_HAS_SVE2); \ $(call cc-option,-march=armv8.3-a, CROSS_CC_HAS_ARMV8_3); \ $(call cc-option,-mbranch-protection=standard, CROSS_CC_HAS_ARMV8_BTI); \ - $(call cc-option,-march=armv8.5-a+memtag, CROSS_CC_HAS_ARMV8_MTE)) 3> config-cc.mak + $(call cc-option,-march=armv8.5-a+memtag, CROSS_CC_HAS_ARMV8_MTE); \ + $(call cc-option,-march=armv9-a+sme, CROSS_CC_HAS_ARMV9_SME)) 3> config-cc.mak -include config-cc.mak # Pauth Tests @@ -XXX,XX +XXX,XX @@ endif ifneq ($(CROSS_CC_HAS_SVE),) # System Registers Tests AARCH64_TESTS += sysregs +ifneq ($(CROSS_CC_HAS_ARMV9_SME),) +sysregs: CFLAGS+=-march=armv9-a+sme -DHAS_ARMV9_SME +else sysregs: CFLAGS+=-march=armv8.1-a+sve +endif # SVE ioctl test AARCH64_TESTS += sve-ioctls -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This function is not used anywhere outside this file, so we can make the function "static void". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 3 --- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, /* Unmap the range of all the notifiers registered to any IOMMU mr */ void smmu_inv_notifiers_all(SMMUState *s); -/* Unmap the range of all the notifiers registered to @mr */ -void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr); - #endif /* HW_ARM_SMMU_COMMON_H */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static void smmu_unmap_notifier_range(IOMMUNotifier *n) } /* Unmap all notifiers attached to @mr */ -inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) +static void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) { IOMMUNotifier *n; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> When using Clang ("Apple clang version 14.0.0 (clang-1400.0.29.202)") and building with -Wall we get: hw/arm/smmu-common.c:173:33: warning: static function 'smmu_hash_remove_by_asid_iova' is used in an inline function with external linkage [-Wstatic-in-inline] hw/arm/smmu-common.h:170:1: note: use 'static' to give inline function 'smmu_iotlb_inv_iova' internal linkage void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, ^ static None of our code base require / use inlined functions with external linkage. Some places use internal inlining in the hot path. These two functions are certainly not in any hot path and don't justify any inlining, so these are likely oversights rather than intentional. Reported-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ void smmu_iotlb_insert(SMMUState *bs, SMMUTransCfg *cfg, SMMUTLBEntry *new) g_hash_table_insert(bs->iotlb, key, new); } -inline void smmu_iotlb_inv_all(SMMUState *s) +void smmu_iotlb_inv_all(SMMUState *s) { trace_smmu_iotlb_inv_all(); g_hash_table_remove_all(s->iotlb); @@ -XXX,XX +XXX,XX @@ static gboolean smmu_hash_remove_by_asid_iova(gpointer key, gpointer value, ((entry->iova & ~info->mask) == info->iova); } -inline void -smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, - uint8_t tg, uint64_t num_pages, uint8_t ttl) +void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, + uint8_t tg, uint64_t num_pages, uint8_t ttl) { /* if tg is not set we use 4KB range invalidation */ uint8_t granule = tg ? tg * 2 + 10 : 12; @@ -XXX,XX +XXX,XX @@ smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, &info); } -inline void smmu_iotlb_inv_asid(SMMUState *s, uint16_t asid) +void smmu_iotlb_inv_asid(SMMUState *s, uint16_t asid) { trace_smmu_iotlb_inv_asid(asid); g_hash_table_foreach_remove(s->iotlb, smmu_hash_remove_by_asid, &asid); @@ -XXX,XX +XXX,XX @@ error: * * return 0 on success */ -inline int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, - SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info) +int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm, + SMMUTLBEntry *tlbe, SMMUPTWEventInfo *info) { if (!cfg->aa64) { /* -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> So far the GPT timers were unable to raise IRQs to the processor. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 5 +++++ hw/arm/fsl-imx7.c | 10 ++++++++++ 2 files changed, 15 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_USB2_IRQ = 42, FSL_IMX7_USB3_IRQ = 40, + FSL_IMX7_GPT1_IRQ = 55, + FSL_IMX7_GPT2_IRQ = 54, + FSL_IMX7_GPT3_IRQ = 53, + FSL_IMX7_GPT4_IRQ = 52, + FSL_IMX7_WDOG1_IRQ = 78, FSL_IMX7_WDOG2_IRQ = 79, FSL_IMX7_WDOG3_IRQ = 10, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPT4_ADDR, }; + static const int FSL_IMX7_GPTn_IRQ[FSL_IMX7_NUM_GPTS] = { + FSL_IMX7_GPT1_IRQ, + FSL_IMX7_GPT2_IRQ, + FSL_IMX7_GPT3_IRQ, + FSL_IMX7_GPT4_IRQ, + }; + s->gpt[i].ccm = IMX_CCM(&s->ccm); sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, FSL_IMX7_GPTn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_GPTn_IRQ[i])); } for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> CCM derived clocks will have to be added later. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx7_ccm.c | 49 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 9 deletions(-) diff --git a/hw/misc/imx7_ccm.c b/hw/misc/imx7_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx7_ccm.c +++ b/hw/misc/imx7_ccm.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "migration/vmstate.h" +#include "trace.h" + +#define CKIH_FREQ 24000000 /* 24MHz crystal input */ + static void imx7_analog_reset(DeviceState *dev) { IMX7AnalogState *s = IMX7_ANALOG(dev); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx7_ccm = { static uint32_t imx7_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) { /* - * This function is "consumed" by GPT emulation code, however on - * i.MX7 each GPT block can have their own clock root. This means - * that this functions needs somehow to know requester's identity - * and the way to pass it: be it via additional IMXClk constants - * or by adding another argument to this method needs to be - * figured out + * This function is "consumed" by GPT emulation code. Some clocks + * have fixed frequencies and we can provide requested frequency + * easily. However for CCM provided clocks (like IPG) each GPT + * timer can have its own clock root. + * This means we need additionnal information when calling this + * function to know the requester's identity. */ - qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Not implemented\n", - TYPE_IMX7_CCM, __func__); - return 0; + uint32_t freq = 0; + + switch (clock) { + case CLK_NONE: + break; + case CLK_32k: + freq = CKIL_FREQ; + break; + case CLK_HIGH: + freq = CKIH_FREQ; + break; + case CLK_IPG: + case CLK_IPG_HIGH: + /* + * For now we don't have a way to figure out the device this + * function is called for. Until then the IPG derived clocks + * are left unimplemented. + */ + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Clock %d Not implemented\n", + TYPE_IMX7_CCM, __func__, clock); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n", + TYPE_IMX7_CCM, __func__, clock); + break; + } + + trace_ccm_clock_freq(clock, freq); + + return freq; } static void imx7_ccm_class_init(ObjectClass *klass, void *data) -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_gpt.h | 1 + hw/arm/fsl-imx6ul.c | 2 +- hw/misc/imx6ul_ccm.c | 6 ------ hw/timer/imx_gpt.c | 25 +++++++++++++++++++++++++ 4 files changed, 27 insertions(+), 7 deletions(-) diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX25_GPT "imx25.gpt" #define TYPE_IMX31_GPT "imx31.gpt" #define TYPE_IMX6_GPT "imx6.gpt" +#define TYPE_IMX6UL_GPT "imx6ul.gpt" #define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); - object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX7_GPT); + object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX6UL_GPT); } /* diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6ul_ccm.c +++ b/hw/misc/imx6ul_ccm.c @@ -XXX,XX +XXX,XX @@ static uint32_t imx6ul_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) case CLK_32k: freq = CKIL_FREQ; break; - case CLK_HIGH: - freq = CKIH_FREQ; - break; - case CLK_HIGH_DIV: - freq = CKIH_FREQ / 8; - break; default: qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n", TYPE_IMX6UL_CCM, __func__, clock); diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ static const IMXClk imx6_gpt_clocks[] = { CLK_HIGH, /* 111 reference clock */ }; +static const IMXClk imx6ul_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz*/ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_NONE, /* 101 not defined */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + static const IMXClk imx7_gpt_clocks[] = { CLK_NONE, /* 000 No clock source */ CLK_IPG, /* 001 ipg_clk, 532MHz*/ @@ -XXX,XX +XXX,XX @@ static void imx6_gpt_init(Object *obj) s->clocks = imx6_gpt_clocks; } +static void imx6ul_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx6ul_gpt_clocks; +} + static void imx7_gpt_init(Object *obj) { IMXGPTState *s = IMX_GPT(obj); @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx6_gpt_info = { .instance_init = imx6_gpt_init, }; +static const TypeInfo imx6ul_gpt_info = { + .name = TYPE_IMX6UL_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx6ul_gpt_init, +}; + static const TypeInfo imx7_gpt_info = { .name = TYPE_IMX7_GPT, .parent = TYPE_IMX25_GPT, @@ -XXX,XX +XXX,XX @@ static void imx_gpt_register_types(void) type_register_static(&imx25_gpt_info); type_register_static(&imx31_gpt_info); type_register_static(&imx6_gpt_info); + type_register_static(&imx6ul_gpt_info); type_register_static(&imx7_gpt_info); } -- 2.25.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> IRQs were not associated to the various GPIO devices inside i.MX7D. This patch brings the i.MX7D on par with i.MX6. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 20221226101418.415170-1-jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 15 +++++++++++++++ hw/arm/fsl-imx7.c | 31 ++++++++++++++++++++++++++++++- 2 files changed, 45 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_GPT3_IRQ = 53, FSL_IMX7_GPT4_IRQ = 52, + FSL_IMX7_GPIO1_LOW_IRQ = 64, + FSL_IMX7_GPIO1_HIGH_IRQ = 65, + FSL_IMX7_GPIO2_LOW_IRQ = 66, + FSL_IMX7_GPIO2_HIGH_IRQ = 67, + FSL_IMX7_GPIO3_LOW_IRQ = 68, + FSL_IMX7_GPIO3_HIGH_IRQ = 69, + FSL_IMX7_GPIO4_LOW_IRQ = 70, + FSL_IMX7_GPIO4_HIGH_IRQ = 71, + FSL_IMX7_GPIO5_LOW_IRQ = 72, + FSL_IMX7_GPIO5_HIGH_IRQ = 73, + FSL_IMX7_GPIO6_LOW_IRQ = 74, + FSL_IMX7_GPIO6_HIGH_IRQ = 75, + FSL_IMX7_GPIO7_LOW_IRQ = 76, + FSL_IMX7_GPIO7_HIGH_IRQ = 77, + FSL_IMX7_WDOG1_IRQ = 78, FSL_IMX7_WDOG2_IRQ = 79, FSL_IMX7_WDOG3_IRQ = 10, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPIO7_ADDR, }; + static const int FSL_IMX7_GPIOn_LOW_IRQ[FSL_IMX7_NUM_GPIOS] = { + FSL_IMX7_GPIO1_LOW_IRQ, + FSL_IMX7_GPIO2_LOW_IRQ, + FSL_IMX7_GPIO3_LOW_IRQ, + FSL_IMX7_GPIO4_LOW_IRQ, + FSL_IMX7_GPIO5_LOW_IRQ, + FSL_IMX7_GPIO6_LOW_IRQ, + FSL_IMX7_GPIO7_LOW_IRQ, + }; + + static const int FSL_IMX7_GPIOn_HIGH_IRQ[FSL_IMX7_NUM_GPIOS] = { + FSL_IMX7_GPIO1_HIGH_IRQ, + FSL_IMX7_GPIO2_HIGH_IRQ, + FSL_IMX7_GPIO3_HIGH_IRQ, + FSL_IMX7_GPIO4_HIGH_IRQ, + FSL_IMX7_GPIO5_HIGH_IRQ, + FSL_IMX7_GPIO6_HIGH_IRQ, + FSL_IMX7_GPIO7_HIGH_IRQ, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, FSL_IMX7_GPIOn_ADDR[i]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, + FSL_IMX7_GPIOn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_GPIOn_LOW_IRQ[i])); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_GPIOn_HIGH_IRQ[i])); } /* -- 2.25.1 From: Stephen Longfield <slongfield@google.com> Size is used at lines 1088/1188 for the loop, which reads the last 4 bytes from the crc_ptr so it does need to get increased, however it shouldn't be increased before the buffer is passed to CRC computation, or the crc32 function will access uninitialized memory. This was pointed out to me by clg@kaod.org during the code review of a similar patch to hw/net/ftgmac100.c Change-Id: Ib0464303b191af1e28abeb2f5105eb25aadb5e9b Signed-off-by: Stephen Longfield <slongfield@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20221221183202.3788132-1-slongfield@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/imx_fec.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static ssize_t imx_fec_receive(NetClientState *nc, const uint8_t *buf, return 0; } - /* 4 bytes for the CRC. */ - size += 4; crc = cpu_to_be32(crc32(~0, buf, size)); + /* Increase size by 4, loop below reads the last 4 bytes from crc_ptr. */ + size += 4; crc_ptr = (uint8_t *) &crc; /* Huge frames are truncated. */ @@ -XXX,XX +XXX,XX @@ static ssize_t imx_enet_receive(NetClientState *nc, const uint8_t *buf, return 0; } - /* 4 bytes for the CRC. */ - size += 4; crc = cpu_to_be32(crc32(~0, buf, size)); + /* Increase size by 4, loop below reads the last 4 bytes from crc_ptr. */ + size += 4; crc_ptr = (uint8_t *) &crc; if (shift16) { -- 2.25.1