tests/acceptance/machine_ppc_pegasos.py | 103 ++++++++++++++++++++++++ 1 file changed, 103 insertions(+) create mode 100644 tests/acceptance/machine_ppc_pegasos.py
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a pair of tests for the Pegasos2 machine following the steps from:
https://lists.nongnu.org/archive/html/qemu-devel/2021-01/msg01553.html
$ AVOCADO_ALLOW_UNTRUSTED_CODE=1 avocado --show=app,console,tesseract \
run -t machine:pegasos2 tests/acceptance/
(1/2) tests/acceptance/machine_ppc_pegasos.py:PPCPegasos2.test_rom_serial_console:
console: PegasosII Boot Strap (c) 2002-2003 bplan GmbH
console: Running on CPU PVR:000C0209
console: Enable L1 ICache... Done.
console: Reading W83194 : FAILED.
console: Setting Front Side Bus to 133MHz... FAILED.
console: Configuring DDR... Done.
console: Configuring PCI0... Done.
console: Configuring PCI1... Done.
console: Configuring ETH... Done.
console: Releasing IDE reset ... Done.
console: Configuring Legacy Devices
console: Initializing KBD... Done.
console: Testing 10000000 Bytes, Pass: 00000000 Failed: 00000000
console: RAM TEST (fill linear)... Done.
console: FFFFFFFF
console: SmartFirmware:
console: cpu0: PowerPC,G4 CPUClock 599 Mhz BUSClock 133 Mhz (Version 0x000C,0x0209)
console: no/bad nvramrc - performing default startup script
console: channel 1 unit 0 : atapi | QEMU DVD-ROM | 2.5+
console: ATA device not present or not responding
console: Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1 (20040405172512)
PASS (5.23 s)
(2/2) tests/acceptance/machine_ppc_pegasos.py:PPCPegasos2.test_morphos_cdrom_vga:
...
console: Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1 (20040405172512)
console: SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.
console: All Rights Reserved.
console: Pegasos BIOS Extensions Copyright 2001-2003 by bplan GmbH.
console: All Rights Reserved.
console: entering main read/eval loop...
console: ok boot cd boot.img
console: ISO-9660 filesystem: System-ID: "MORPHOS" Volume-ID: "MorphOSBoot"
console: " flags=0x2 extent=0x20 size=0x1800
console: Memory used before SYS_Init: 9MB
console: PCI ATA/ATAPI Driver@2: PIO Mode 4
console: PCI ATA/ATAPI Driver@2: UDMA Mode 5
console: ide.device@2: QEMU QEMU DVD-ROM <CDROM>
console: ide.device@2: CDRom <CD001>,<MORPHOS > found, bootable
tesseract: Ambient Screen 4: Saturday, 15 May 2021, 13:36:06 &
tesseract: keymap
tesseract: Albanian keyboard with 101/104 keys
tesseract: ‘American keyboard with Greek input extension, 105 keys
tesseract: Belarusian keyboard with 105 keys
tesseract: Belgian keyboard with 105 keys J
tesseract: British Apple keyboard
tesseract: British keyboard with 105 keys
tesseract: Bulgarian keyboard with 104 keys
tesseract: Canadian keyboard with 105 keys
tesseract: Colemak layout for keyboards with 101/104 keys
tesseract: Croatian keyboard with 101/108 keys
tesseract: Czech keyboard (QWERTY) with 101/104 keys
tesseract: Czech keyboard (QWERTZ) with 101/104 keys
tesseract: Danish keyboard with 105 keys
PASS (28.56 s)
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 34.42 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
---
tests/acceptance/machine_ppc_pegasos.py | 103 ++++++++++++++++++++++++
1 file changed, 103 insertions(+)
create mode 100644 tests/acceptance/machine_ppc_pegasos.py
diff --git a/tests/acceptance/machine_ppc_pegasos.py b/tests/acceptance/machine_ppc_pegasos.py
new file mode 100644
index 0000000000..e890a3a539
--- /dev/null
+++ b/tests/acceptance/machine_ppc_pegasos.py
@@ -0,0 +1,103 @@
+# Functional tests for the Pegasos2 machine.
+#
+# Copyright (c) 2021 Philippe Mathieu-Daudé <f4bug@amsat.org>
+#
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+import os
+import time
+
+from avocado import skipUnless
+from avocado_qemu import Test
+from avocado_qemu import exec_command_and_wait_for_pattern
+from avocado_qemu import wait_for_console_pattern
+from tesseract_utils import tesseract_available, tesseract_ocr
+
+PIL_AVAILABLE = True
+try:
+ from PIL import Image
+except ImportError:
+ PIL_AVAILABLE = False
+
+
+@skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
+class PPCPegasos2(Test):
+ """These tests require a Pegasos2 ROM. You need to perform a one
+ time manual set up of the ROM, registering it with the Avocado
+ assets system. Please follow the steps bellow from a QEMU build
+ directory, replaceing $MY_ROMS_DIR with a suitable directory.
+
+ 1. make check-venv
+ 2. curl http://web.archive.org/web/20071021223056/http://www.bplan-gmbh.de/up050404/up050404 -o $MY_ROMS_DIR/up050404
+ 3. tail -c +85581 /tmp/up050404 | head -c 524288 > $MY_ROMS_DIR/pegasos2.rom
+ 4. ./tests/venv/bin/avocado assets register --hash 08dc28afb3d10fb223376a28eebfd07c9f8df9fa pegasos2.rom $MY_ROMS_DIR/pegasos2.rom
+ """
+ timeout = 60
+ rom_hash = '08dc28afb3d10fb223376a28eebfd07c9f8df9fa'
+
+ def test_rom_serial_console(self):
+ """
+ :avocado: tags=arch:ppc
+ :avocado: tags=machine:pegasos2
+ :avocado: tags=device:mv64361
+ :avocado: tags=device:vt8231
+ """
+ rom_path = self.fetch_asset('pegasos2.rom', asset_hash=self.rom_hash)
+ self.vm.set_console()
+ self.vm.add_args('-bios', rom_path)
+ self.vm.launch()
+ msg = 'PegasosII Boot Strap (c) 2002-2003 bplan GmbH'
+ wait_for_console_pattern(self, msg)
+ msg = 'Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1'
+ wait_for_console_pattern(self, msg)
+
+ def test_morphos_cdrom_vga(self):
+ """
+ :avocado: tags=arch:ppc
+ :avocado: tags=machine:pegasos2
+ :avocado: tags=device:mv64361
+ :avocado: tags=device:vt8231
+ :avocado: tags=device:ati-vga
+ """
+ rom_path = self.fetch_asset('pegasos2.rom', asset_hash=self.rom_hash)
+ iso_url = 'https://www.morphos-team.net/morphos-3.15.iso'
+ iso_hash = 'a19dbfbbc4728e0ba9ceb6335db69ca4'
+ iso_path = self.fetch_asset(iso_url,
+ asset_hash=iso_hash, algorithm='md5')
+
+ self.vm.set_console()
+ self.vm.add_args('-bios', rom_path,
+ '-device', 'ati-vga,romfile=',
+ '-cdrom', iso_path)
+ self.vm.launch()
+ msg = 'Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1'
+ wait_for_console_pattern(self, msg)
+ wait_for_console_pattern(self, 'entering main read/eval loop...')
+ msg = 'filesystem: System-ID: "MORPHOS" Volume-ID: "MorphOSBoot"'
+ exec_command_and_wait_for_pattern(self, 'boot cd boot.img', msg)
+
+ msg = 'ide.device@2: CDRom <CD001>,<MORPHOS > found, bootable'
+ wait_for_console_pattern(self, msg)
+ if PIL_AVAILABLE:
+ delay_s = 20 if tesseract_available(4) else 8
+
+ self.log.info('VM launched, waiting for display')
+ # TODO: Use avocado.utils.wait.wait_for to catch the
+ # 'displaysurface_create 1120x832' trace-event.
+ time.sleep(delay_s)
+
+ screenshot_path = os.path.join(self.workdir, "dump.ppm")
+ self.vm.command('human-monitor-command',
+ command_line='screendump %s' % screenshot_path)
+ width, height = Image.open(screenshot_path).size
+ self.assertEqual(width, 2048)
+ self.assertEqual(height, 1152)
+
+ if tesseract_available(4):
+ lines = tesseract_ocr(screenshot_path, tesseract_version=4)
+ text = '\n'.join(lines)
+ msg = 'American keyboard with Greek input extension, 105 keys'
+ self.assertIn(msg, text)
--
2.31.1
Hi Cleber,
On 7/13/21 3:43 AM, Cleber Rosa wrote:
> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
>
> Add a pair of tests for the Pegasos2 machine following the steps from:
> https://lists.nongnu.org/archive/html/qemu-devel/2021-01/msg01553.html
>
> $ AVOCADO_ALLOW_UNTRUSTED_CODE=1 avocado --show=app,console,tesseract \
> run -t machine:pegasos2 tests/acceptance/
> (1/2) tests/acceptance/machine_ppc_pegasos.py:PPCPegasos2.test_rom_serial_console:
> console: PegasosII Boot Strap (c) 2002-2003 bplan GmbH
> console: Running on CPU PVR:000C0209
> console: Enable L1 ICache... Done.
> console: Reading W83194 : FAILED.
> console: Setting Front Side Bus to 133MHz... FAILED.
> console: Configuring DDR... Done.
> console: Configuring PCI0... Done.
> console: Configuring PCI1... Done.
> console: Configuring ETH... Done.
> console: Releasing IDE reset ... Done.
> console: Configuring Legacy Devices
> console: Initializing KBD... Done.
> console: Testing 10000000 Bytes, Pass: 00000000 Failed: 00000000
> console: RAM TEST (fill linear)... Done.
> console: FFFFFFFF
> console: SmartFirmware:
> console: cpu0: PowerPC,G4 CPUClock 599 Mhz BUSClock 133 Mhz (Version 0x000C,0x0209)
> console: no/bad nvramrc - performing default startup script
> console: channel 1 unit 0 : atapi | QEMU DVD-ROM | 2.5+
> console: ATA device not present or not responding
> console: Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1 (20040405172512)
> PASS (5.23 s)
> (2/2) tests/acceptance/machine_ppc_pegasos.py:PPCPegasos2.test_morphos_cdrom_vga:
> ...
> console: Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1 (20040405172512)
> console: SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.
> console: All Rights Reserved.
> console: Pegasos BIOS Extensions Copyright 2001-2003 by bplan GmbH.
> console: All Rights Reserved.
> console: entering main read/eval loop...
> console: ok boot cd boot.img
> console: ISO-9660 filesystem: System-ID: "MORPHOS" Volume-ID: "MorphOSBoot"
> console: " flags=0x2 extent=0x20 size=0x1800
> console: Memory used before SYS_Init: 9MB
> console: PCI ATA/ATAPI Driver@2: PIO Mode 4
> console: PCI ATA/ATAPI Driver@2: UDMA Mode 5
> console: ide.device@2: QEMU QEMU DVD-ROM <CDROM>
> console: ide.device@2: CDRom <CD001>,<MORPHOS > found, bootable
> tesseract: Ambient Screen 4: Saturday, 15 May 2021, 13:36:06 &
> tesseract: keymap
> tesseract: Albanian keyboard with 101/104 keys
> tesseract: ‘American keyboard with Greek input extension, 105 keys
> tesseract: Belarusian keyboard with 105 keys
> tesseract: Belgian keyboard with 105 keys J
> tesseract: British Apple keyboard
> tesseract: British keyboard with 105 keys
> tesseract: Bulgarian keyboard with 104 keys
> tesseract: Canadian keyboard with 105 keys
> tesseract: Colemak layout for keyboards with 101/104 keys
> tesseract: Croatian keyboard with 101/108 keys
> tesseract: Czech keyboard (QWERTY) with 101/104 keys
> tesseract: Czech keyboard (QWERTZ) with 101/104 keys
> tesseract: Danish keyboard with 105 keys
> PASS (28.56 s)
> RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
> JOB TIME : 34.42 s
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Signed-off-by: Cleber Rosa <crosa@redhat.com>
> ---
So this is v2.
Here would be nice to have the list of changes.
> tests/acceptance/machine_ppc_pegasos.py | 103 ++++++++++++++++++++++++
> 1 file changed, 103 insertions(+)
> create mode 100644 tests/acceptance/machine_ppc_pegasos.py
>
> diff --git a/tests/acceptance/machine_ppc_pegasos.py b/tests/acceptance/machine_ppc_pegasos.py
> new file mode 100644
> index 0000000000..e890a3a539
> --- /dev/null
> +++ b/tests/acceptance/machine_ppc_pegasos.py
> @@ -0,0 +1,103 @@
> +# Functional tests for the Pegasos2 machine.
> +#
> +# Copyright (c) 2021 Philippe Mathieu-Daudé <f4bug@amsat.org>
> +#
> +# This work is licensed under the terms of the GNU GPL, version 2 or later.
> +# See the COPYING file in the top-level directory.
> +#
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +import os
> +import time
> +
> +from avocado import skipUnless
> +from avocado_qemu import Test
> +from avocado_qemu import exec_command_and_wait_for_pattern
> +from avocado_qemu import wait_for_console_pattern
> +from tesseract_utils import tesseract_available, tesseract_ocr
> +
> +PIL_AVAILABLE = True
> +try:
> + from PIL import Image
> +except ImportError:
> + PIL_AVAILABLE = False
> +
> +
> +@skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
> +class PPCPegasos2(Test):
> + """These tests require a Pegasos2 ROM. You need to perform a one
> + time manual set up of the ROM, registering it with the Avocado
> + assets system. Please follow the steps bellow from a QEMU build
> + directory, replaceing $MY_ROMS_DIR with a suitable directory.
> +
> + 1. make check-venv
> + 2. curl http://web.archive.org/web/20071021223056/http://www.bplan-gmbh.de/up050404/up050404 -o $MY_ROMS_DIR/up050404
> + 3. tail -c +85581 /tmp/up050404 | head -c 524288 > $MY_ROMS_DIR/pegasos2.rom
Sorry but I am not signing for this patch description. I don't think
the project should link non-free software like this; which is why I
only listed the recipe link in the commit description. Maybe we can
simply add this link here again.
Stefan do you know what is recommended?
> + 4. ./tests/venv/bin/avocado assets register --hash 08dc28afb3d10fb223376a28eebfd07c9f8df9fa pegasos2.rom $MY_ROMS_DIR/pegasos2.rom
> + """
> + timeout = 60
> + rom_hash = '08dc28afb3d10fb223376a28eebfd07c9f8df9fa'
> +
> + def test_rom_serial_console(self):
> + """
> + :avocado: tags=arch:ppc
> + :avocado: tags=machine:pegasos2
> + :avocado: tags=device:mv64361
> + :avocado: tags=device:vt8231
> + """
> + rom_path = self.fetch_asset('pegasos2.rom', asset_hash=self.rom_hash)
> + self.vm.set_console()
> + self.vm.add_args('-bios', rom_path)
> + self.vm.launch()
> + msg = 'PegasosII Boot Strap (c) 2002-2003 bplan GmbH'
> + wait_for_console_pattern(self, msg)
> + msg = 'Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1'
> + wait_for_console_pattern(self, msg)
> +
> + def test_morphos_cdrom_vga(self):
> + """
> + :avocado: tags=arch:ppc
> + :avocado: tags=machine:pegasos2
> + :avocado: tags=device:mv64361
> + :avocado: tags=device:vt8231
> + :avocado: tags=device:ati-vga
> + """
> + rom_path = self.fetch_asset('pegasos2.rom', asset_hash=self.rom_hash)
> + iso_url = 'https://www.morphos-team.net/morphos-3.15.iso'
> + iso_hash = 'a19dbfbbc4728e0ba9ceb6335db69ca4'
> + iso_path = self.fetch_asset(iso_url,
> + asset_hash=iso_hash, algorithm='md5')
> +
> + self.vm.set_console()
> + self.vm.add_args('-bios', rom_path,
> + '-device', 'ati-vga,romfile=',
> + '-cdrom', iso_path)
> + self.vm.launch()
> + msg = 'Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1'
> + wait_for_console_pattern(self, msg)
> + wait_for_console_pattern(self, 'entering main read/eval loop...')
> + msg = 'filesystem: System-ID: "MORPHOS" Volume-ID: "MorphOSBoot"'
> + exec_command_and_wait_for_pattern(self, 'boot cd boot.img', msg)
> +
> + msg = 'ide.device@2: CDRom <CD001>,<MORPHOS > found, bootable'
> + wait_for_console_pattern(self, msg)
> + if PIL_AVAILABLE:
> + delay_s = 20 if tesseract_available(4) else 8
> +
> + self.log.info('VM launched, waiting for display')
> + # TODO: Use avocado.utils.wait.wait_for to catch the
> + # 'displaysurface_create 1120x832' trace-event.
> + time.sleep(delay_s)
> +
> + screenshot_path = os.path.join(self.workdir, "dump.ppm")
> + self.vm.command('human-monitor-command',
> + command_line='screendump %s' % screenshot_path)
> + width, height = Image.open(screenshot_path).size
> + self.assertEqual(width, 2048)
> + self.assertEqual(height, 1152)
> +
> + if tesseract_available(4):
> + lines = tesseract_ocr(screenshot_path, tesseract_version=4)
> + text = '\n'.join(lines)
> + msg = 'American keyboard with Greek input extension, 105 keys'
> + self.assertIn(msg, text)
>
For the test code part it looks better indeed, thanks for the help here.
Regards,
Phil.
On Wed, 14 Jul 2021, Philippe Mathieu-Daudé wrote:
> Hi Cleber,
>
> On 7/13/21 3:43 AM, Cleber Rosa wrote:
>> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>
>> Add a pair of tests for the Pegasos2 machine following the steps from:
>> https://lists.nongnu.org/archive/html/qemu-devel/2021-01/msg01553.html
>>
>> $ AVOCADO_ALLOW_UNTRUSTED_CODE=1 avocado --show=app,console,tesseract \
>> run -t machine:pegasos2 tests/acceptance/
>> (1/2) tests/acceptance/machine_ppc_pegasos.py:PPCPegasos2.test_rom_serial_console:
>> console: PegasosII Boot Strap (c) 2002-2003 bplan GmbH
>> console: Running on CPU PVR:000C0209
>> console: Enable L1 ICache... Done.
>> console: Reading W83194 : FAILED.
>> console: Setting Front Side Bus to 133MHz... FAILED.
>> console: Configuring DDR... Done.
>> console: Configuring PCI0... Done.
>> console: Configuring PCI1... Done.
>> console: Configuring ETH... Done.
>> console: Releasing IDE reset ... Done.
>> console: Configuring Legacy Devices
>> console: Initializing KBD... Done.
>> console: Testing 10000000 Bytes, Pass: 00000000 Failed: 00000000
>> console: RAM TEST (fill linear)... Done.
>> console: FFFFFFFF
>> console: SmartFirmware:
>> console: cpu0: PowerPC,G4 CPUClock 599 Mhz BUSClock 133 Mhz (Version 0x000C,0x0209)
>> console: no/bad nvramrc - performing default startup script
>> console: channel 1 unit 0 : atapi | QEMU DVD-ROM | 2.5+
>> console: ATA device not present or not responding
>> console: Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1 (20040405172512)
>> PASS (5.23 s)
>> (2/2) tests/acceptance/machine_ppc_pegasos.py:PPCPegasos2.test_morphos_cdrom_vga:
>> ...
>> console: Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1 (20040405172512)
>> console: SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.
>> console: All Rights Reserved.
>> console: Pegasos BIOS Extensions Copyright 2001-2003 by bplan GmbH.
>> console: All Rights Reserved.
>> console: entering main read/eval loop...
>> console: ok boot cd boot.img
>> console: ISO-9660 filesystem: System-ID: "MORPHOS" Volume-ID: "MorphOSBoot"
>> console: " flags=0x2 extent=0x20 size=0x1800
>> console: Memory used before SYS_Init: 9MB
>> console: PCI ATA/ATAPI Driver@2: PIO Mode 4
>> console: PCI ATA/ATAPI Driver@2: UDMA Mode 5
>> console: ide.device@2: QEMU QEMU DVD-ROM <CDROM>
>> console: ide.device@2: CDRom <CD001>,<MORPHOS > found, bootable
>> tesseract: Ambient Screen 4: Saturday, 15 May 2021, 13:36:06 &
>> tesseract: keymap
>> tesseract: Albanian keyboard with 101/104 keys
>> tesseract: ‘American keyboard with Greek input extension, 105 keys
>> tesseract: Belarusian keyboard with 105 keys
>> tesseract: Belgian keyboard with 105 keys J
>> tesseract: British Apple keyboard
>> tesseract: British keyboard with 105 keys
>> tesseract: Bulgarian keyboard with 104 keys
>> tesseract: Canadian keyboard with 105 keys
>> tesseract: Colemak layout for keyboards with 101/104 keys
>> tesseract: Croatian keyboard with 101/108 keys
>> tesseract: Czech keyboard (QWERTY) with 101/104 keys
>> tesseract: Czech keyboard (QWERTZ) with 101/104 keys
>> tesseract: Danish keyboard with 105 keys
>> PASS (28.56 s)
>> RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
>> JOB TIME : 34.42 s
>>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> Signed-off-by: Cleber Rosa <crosa@redhat.com>
>> ---
>
> So this is v2.
>
> Here would be nice to have the list of changes.
>
>> tests/acceptance/machine_ppc_pegasos.py | 103 ++++++++++++++++++++++++
>> 1 file changed, 103 insertions(+)
>> create mode 100644 tests/acceptance/machine_ppc_pegasos.py
>>
>> diff --git a/tests/acceptance/machine_ppc_pegasos.py b/tests/acceptance/machine_ppc_pegasos.py
>> new file mode 100644
>> index 0000000000..e890a3a539
>> --- /dev/null
>> +++ b/tests/acceptance/machine_ppc_pegasos.py
>> @@ -0,0 +1,103 @@
>> +# Functional tests for the Pegasos2 machine.
>> +#
>> +# Copyright (c) 2021 Philippe Mathieu-Daudé <f4bug@amsat.org>
>> +#
>> +# This work is licensed under the terms of the GNU GPL, version 2 or later.
>> +# See the COPYING file in the top-level directory.
>> +#
>> +# SPDX-License-Identifier: GPL-2.0-or-later
>> +
>> +import os
>> +import time
>> +
>> +from avocado import skipUnless
>> +from avocado_qemu import Test
>> +from avocado_qemu import exec_command_and_wait_for_pattern
>> +from avocado_qemu import wait_for_console_pattern
>> +from tesseract_utils import tesseract_available, tesseract_ocr
>> +
>> +PIL_AVAILABLE = True
>> +try:
>> + from PIL import Image
>> +except ImportError:
>> + PIL_AVAILABLE = False
>> +
>> +
>> +@skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
>> +class PPCPegasos2(Test):
>> + """These tests require a Pegasos2 ROM. You need to perform a one
>> + time manual set up of the ROM, registering it with the Avocado
>> + assets system. Please follow the steps bellow from a QEMU build
>> + directory, replaceing $MY_ROMS_DIR with a suitable directory.
>> +
>> + 1. make check-venv
>> + 2. curl http://web.archive.org/web/20071021223056/http://www.bplan-gmbh.de/up050404/up050404 -o $MY_ROMS_DIR/up050404
>> + 3. tail -c +85581 /tmp/up050404 | head -c 524288 > $MY_ROMS_DIR/pegasos2.rom
>
> Sorry but I am not signing for this patch description. I don't think
> the project should link non-free software like this; which is why I
> only listed the recipe link in the commit description. Maybe we can
> simply add this link here again.
>
> Stefan do you know what is recommended?
>
>> + 4. ./tests/venv/bin/avocado assets register --hash 08dc28afb3d10fb223376a28eebfd07c9f8df9fa pegasos2.rom $MY_ROMS_DIR/pegasos2.rom
>> + """
>> + timeout = 60
>> + rom_hash = '08dc28afb3d10fb223376a28eebfd07c9f8df9fa'
>> +
>> + def test_rom_serial_console(self):
>> + """
>> + :avocado: tags=arch:ppc
>> + :avocado: tags=machine:pegasos2
>> + :avocado: tags=device:mv64361
>> + :avocado: tags=device:vt8231
>> + """
>> + rom_path = self.fetch_asset('pegasos2.rom', asset_hash=self.rom_hash)
>> + self.vm.set_console()
>> + self.vm.add_args('-bios', rom_path)
>> + self.vm.launch()
>> + msg = 'PegasosII Boot Strap (c) 2002-2003 bplan GmbH'
>> + wait_for_console_pattern(self, msg)
>> + msg = 'Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1'
>> + wait_for_console_pattern(self, msg)
>> +
>> + def test_morphos_cdrom_vga(self):
>> + """
>> + :avocado: tags=arch:ppc
>> + :avocado: tags=machine:pegasos2
>> + :avocado: tags=device:mv64361
>> + :avocado: tags=device:vt8231
>> + :avocado: tags=device:ati-vga
>> + """
>> + rom_path = self.fetch_asset('pegasos2.rom', asset_hash=self.rom_hash)
>> + iso_url = 'https://www.morphos-team.net/morphos-3.15.iso'
>> + iso_hash = 'a19dbfbbc4728e0ba9ceb6335db69ca4'
>> + iso_path = self.fetch_asset(iso_url,
>> + asset_hash=iso_hash, algorithm='md5')
>> +
>> + self.vm.set_console()
>> + self.vm.add_args('-bios', rom_path,
>> + '-device', 'ati-vga,romfile=',
>> + '-cdrom', iso_path)
>> + self.vm.launch()
>> + msg = 'Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1'
>> + wait_for_console_pattern(self, msg)
>> + wait_for_console_pattern(self, 'entering main read/eval loop...')
>> + msg = 'filesystem: System-ID: "MORPHOS" Volume-ID: "MorphOSBoot"'
This should wait until these messages instead:
ide.device@2: QEMU QEMU DVD-ROM <CDROM>
ide.device@2: CDRom <CD001>,<MORPHOS > found, bootable
otherwise it could happen this test passes when cdrom somewhat works so it
can find the iso but DMA is not working so it can't actually read it. I've
seen this happening during development and when via-ide was in wrong mode
so waiting for the above lines confirm MorphOS could also read the CD not
just find it. (Although you seem to go further and try to parse the
graphical screen too. I think that's probably an overkill but could detect
if MorphOS booted and maybe test ati-vga too.)
Regards,
BALATON Zoltan
>> + exec_command_and_wait_for_pattern(self, 'boot cd boot.img', msg)
>> +
>> + msg = 'ide.device@2: CDRom <CD001>,<MORPHOS > found, bootable'
>> + wait_for_console_pattern(self, msg)
>> + if PIL_AVAILABLE:
>> + delay_s = 20 if tesseract_available(4) else 8
>> +
>> + self.log.info('VM launched, waiting for display')
>> + # TODO: Use avocado.utils.wait.wait_for to catch the
>> + # 'displaysurface_create 1120x832' trace-event.
>> + time.sleep(delay_s)
>> +
>> + screenshot_path = os.path.join(self.workdir, "dump.ppm")
>> + self.vm.command('human-monitor-command',
>> + command_line='screendump %s' % screenshot_path)
>> + width, height = Image.open(screenshot_path).size
>> + self.assertEqual(width, 2048)
>> + self.assertEqual(height, 1152)
>> +
>> + if tesseract_available(4):
>> + lines = tesseract_ocr(screenshot_path, tesseract_version=4)
>> + text = '\n'.join(lines)
>> + msg = 'American keyboard with Greek input extension, 105 keys'
>> + self.assertIn(msg, text)
>>
>
> For the test code part it looks better indeed, thanks for the help here.
>
> Regards,
>
> Phil.
>
>
On Wed, 14 Jul 2021, Philippe Mathieu-Daudé wrote:
> Hi Cleber,
>
> On 7/13/21 3:43 AM, Cleber Rosa wrote:
>> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>
>> Add a pair of tests for the Pegasos2 machine following the steps from:
>> https://lists.nongnu.org/archive/html/qemu-devel/2021-01/msg01553.html
>>
>> $ AVOCADO_ALLOW_UNTRUSTED_CODE=1 avocado --show=app,console,tesseract \
>> run -t machine:pegasos2 tests/acceptance/
>> (1/2) tests/acceptance/machine_ppc_pegasos.py:PPCPegasos2.test_rom_serial_console:
>> console: PegasosII Boot Strap (c) 2002-2003 bplan GmbH
>> console: Running on CPU PVR:000C0209
>> console: Enable L1 ICache... Done.
>> console: Reading W83194 : FAILED.
>> console: Setting Front Side Bus to 133MHz... FAILED.
>> console: Configuring DDR... Done.
>> console: Configuring PCI0... Done.
>> console: Configuring PCI1... Done.
>> console: Configuring ETH... Done.
>> console: Releasing IDE reset ... Done.
>> console: Configuring Legacy Devices
>> console: Initializing KBD... Done.
>> console: Testing 10000000 Bytes, Pass: 00000000 Failed: 00000000
>> console: RAM TEST (fill linear)... Done.
>> console: FFFFFFFF
>> console: SmartFirmware:
>> console: cpu0: PowerPC,G4 CPUClock 599 Mhz BUSClock 133 Mhz (Version 0x000C,0x0209)
>> console: no/bad nvramrc - performing default startup script
>> console: channel 1 unit 0 : atapi | QEMU DVD-ROM | 2.5+
>> console: ATA device not present or not responding
>> console: Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1 (20040405172512)
>> PASS (5.23 s)
>> (2/2) tests/acceptance/machine_ppc_pegasos.py:PPCPegasos2.test_morphos_cdrom_vga:
>> ...
>> console: Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1 (20040405172512)
>> console: SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.
>> console: All Rights Reserved.
>> console: Pegasos BIOS Extensions Copyright 2001-2003 by bplan GmbH.
>> console: All Rights Reserved.
>> console: entering main read/eval loop...
>> console: ok boot cd boot.img
>> console: ISO-9660 filesystem: System-ID: "MORPHOS" Volume-ID: "MorphOSBoot"
>> console: " flags=0x2 extent=0x20 size=0x1800
>> console: Memory used before SYS_Init: 9MB
>> console: PCI ATA/ATAPI Driver@2: PIO Mode 4
>> console: PCI ATA/ATAPI Driver@2: UDMA Mode 5
>> console: ide.device@2: QEMU QEMU DVD-ROM <CDROM>
>> console: ide.device@2: CDRom <CD001>,<MORPHOS > found, bootable
>> tesseract: Ambient Screen 4: Saturday, 15 May 2021, 13:36:06 &
>> tesseract: keymap
>> tesseract: Albanian keyboard with 101/104 keys
>> tesseract: ‘American keyboard with Greek input extension, 105 keys
>> tesseract: Belarusian keyboard with 105 keys
>> tesseract: Belgian keyboard with 105 keys J
>> tesseract: British Apple keyboard
>> tesseract: British keyboard with 105 keys
>> tesseract: Bulgarian keyboard with 104 keys
>> tesseract: Canadian keyboard with 105 keys
>> tesseract: Colemak layout for keyboards with 101/104 keys
>> tesseract: Croatian keyboard with 101/108 keys
>> tesseract: Czech keyboard (QWERTY) with 101/104 keys
>> tesseract: Czech keyboard (QWERTZ) with 101/104 keys
>> tesseract: Danish keyboard with 105 keys
>> PASS (28.56 s)
>> RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
>> JOB TIME : 34.42 s
>>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> Signed-off-by: Cleber Rosa <crosa@redhat.com>
>> ---
>
> So this is v2.
>
> Here would be nice to have the list of changes.
>
>> tests/acceptance/machine_ppc_pegasos.py | 103 ++++++++++++++++++++++++
>> 1 file changed, 103 insertions(+)
>> create mode 100644 tests/acceptance/machine_ppc_pegasos.py
>>
>> diff --git a/tests/acceptance/machine_ppc_pegasos.py b/tests/acceptance/machine_ppc_pegasos.py
>> new file mode 100644
>> index 0000000000..e890a3a539
>> --- /dev/null
>> +++ b/tests/acceptance/machine_ppc_pegasos.py
>> @@ -0,0 +1,103 @@
>> +# Functional tests for the Pegasos2 machine.
>> +#
>> +# Copyright (c) 2021 Philippe Mathieu-Daudé <f4bug@amsat.org>
>> +#
>> +# This work is licensed under the terms of the GNU GPL, version 2 or later.
>> +# See the COPYING file in the top-level directory.
>> +#
>> +# SPDX-License-Identifier: GPL-2.0-or-later
>> +
>> +import os
>> +import time
>> +
>> +from avocado import skipUnless
>> +from avocado_qemu import Test
>> +from avocado_qemu import exec_command_and_wait_for_pattern
>> +from avocado_qemu import wait_for_console_pattern
>> +from tesseract_utils import tesseract_available, tesseract_ocr
>> +
>> +PIL_AVAILABLE = True
>> +try:
>> + from PIL import Image
>> +except ImportError:
>> + PIL_AVAILABLE = False
>> +
>> +
>> +@skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
>> +class PPCPegasos2(Test):
>> + """These tests require a Pegasos2 ROM. You need to perform a one
>> + time manual set up of the ROM, registering it with the Avocado
>> + assets system. Please follow the steps bellow from a QEMU build
>> + directory, replaceing $MY_ROMS_DIR with a suitable directory.
>> +
>> + 1. make check-venv
>> + 2. curl http://web.archive.org/web/20071021223056/http://www.bplan-gmbh.de/up050404/up050404 -o $MY_ROMS_DIR/up050404
>> + 3. tail -c +85581 /tmp/up050404 | head -c 524288 > $MY_ROMS_DIR/pegasos2.rom
>
> Sorry but I am not signing for this patch description. I don't think
> the project should link non-free software like this; which is why I
> only listed the recipe link in the commit description. Maybe we can
> simply add this link here again.
>
> Stefan do you know what is recommended?
>
>> + 4. ./tests/venv/bin/avocado assets register --hash 08dc28afb3d10fb223376a28eebfd07c9f8df9fa pegasos2.rom $MY_ROMS_DIR/pegasos2.rom
>> + """
>> + timeout = 60
>> + rom_hash = '08dc28afb3d10fb223376a28eebfd07c9f8df9fa'
>> +
>> + def test_rom_serial_console(self):
>> + """
>> + :avocado: tags=arch:ppc
>> + :avocado: tags=machine:pegasos2
>> + :avocado: tags=device:mv64361
>> + :avocado: tags=device:vt8231
>> + """
>> + rom_path = self.fetch_asset('pegasos2.rom', asset_hash=self.rom_hash)
>> + self.vm.set_console()
>> + self.vm.add_args('-bios', rom_path)
>> + self.vm.launch()
>> + msg = 'PegasosII Boot Strap (c) 2002-2003 bplan GmbH'
>> + wait_for_console_pattern(self, msg)
>> + msg = 'Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1'
>> + wait_for_console_pattern(self, msg)
>> +
>> + def test_morphos_cdrom_vga(self):
>> + """
>> + :avocado: tags=arch:ppc
>> + :avocado: tags=machine:pegasos2
>> + :avocado: tags=device:mv64361
>> + :avocado: tags=device:vt8231
>> + :avocado: tags=device:ati-vga
>> + """
>> + rom_path = self.fetch_asset('pegasos2.rom', asset_hash=self.rom_hash)
>> + iso_url = 'https://www.morphos-team.net/morphos-3.15.iso'
>> + iso_hash = 'a19dbfbbc4728e0ba9ceb6335db69ca4'
>> + iso_path = self.fetch_asset(iso_url,
>> + asset_hash=iso_hash, algorithm='md5')
>> +
>> + self.vm.set_console()
>> + self.vm.add_args('-bios', rom_path,
>> + '-device', 'ati-vga,romfile=',
>> + '-cdrom', iso_path)
>> + self.vm.launch()
>> + msg = 'Welcome to SmartFirmware(tm) for bplan Pegasos2 version 1.1'
>> + wait_for_console_pattern(self, msg)
>> + wait_for_console_pattern(self, 'entering main read/eval loop...')
>> + msg = 'filesystem: System-ID: "MORPHOS" Volume-ID: "MorphOSBoot"'
>> + exec_command_and_wait_for_pattern(self, 'boot cd boot.img', msg)
>> +
>> + msg = 'ide.device@2: CDRom <CD001>,<MORPHOS > found, bootable'
>> + wait_for_console_pattern(self, msg)
Now I see it does wait for that here too. I don't know why you have so
many wait's instead of just two: "entering main read/eval loop\nok" and
this one but I don't know how these tests work so that's OK. Then
disregard my previous comment.
Regards,
BALATON Zoltan
>> + if PIL_AVAILABLE:
>> + delay_s = 20 if tesseract_available(4) else 8
>> +
>> + self.log.info('VM launched, waiting for display')
>> + # TODO: Use avocado.utils.wait.wait_for to catch the
>> + # 'displaysurface_create 1120x832' trace-event.
>> + time.sleep(delay_s)
>> +
>> + screenshot_path = os.path.join(self.workdir, "dump.ppm")
>> + self.vm.command('human-monitor-command',
>> + command_line='screendump %s' % screenshot_path)
>> + width, height = Image.open(screenshot_path).size
>> + self.assertEqual(width, 2048)
>> + self.assertEqual(height, 1152)
>> +
>> + if tesseract_available(4):
>> + lines = tesseract_ocr(screenshot_path, tesseract_version=4)
>> + text = '\n'.join(lines)
>> + msg = 'American keyboard with Greek input extension, 105 keys'
>> + self.assertIn(msg, text)
>>
>
> For the test code part it looks better indeed, thanks for the help here.
>
> Regards,
>
> Phil.
>
>
On Wed, Jul 14, 2021 at 11:37:54AM +0200, Philippe Mathieu-Daudé wrote:
> On 7/13/21 3:43 AM, Cleber Rosa wrote:
> > +@skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
> > +class PPCPegasos2(Test):
> > + """These tests require a Pegasos2 ROM. You need to perform a one
> > + time manual set up of the ROM, registering it with the Avocado
> > + assets system. Please follow the steps bellow from a QEMU build
> > + directory, replaceing $MY_ROMS_DIR with a suitable directory.
> > +
> > + 1. make check-venv
> > + 2. curl http://web.archive.org/web/20071021223056/http://www.bplan-gmbh.de/up050404/up050404 -o $MY_ROMS_DIR/up050404
> > + 3. tail -c +85581 /tmp/up050404 | head -c 524288 > $MY_ROMS_DIR/pegasos2.rom
>
> Sorry but I am not signing for this patch description. I don't think
> the project should link non-free software like this; which is why I
> only listed the recipe link in the commit description. Maybe we can
> simply add this link here again.
>
> Stefan do you know what is recommended?
I think that it's okay to include instructions for manually adding
non-free software, but I'm not a lawyer.
I don't know what the origin of this up050404 file is and under what
license it is available. Could you add that information so users can
make their own decision on whether or not to manually install it?
Thanks,
Stefan
© 2016 - 2024 Red Hat, Inc.