Arm changes for before softfreeze: mostly my PL061/GPIO patches, but also a new M-profile board and various other things. thanks -- PMM The following changes since commit 05de778b5b8ab0b402996769117b88c7ea5c7c61: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2021-07-09 14:30:01 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210709 for you to fetch changes up to 05449abb1d4c5f0c69ceb3d8d03cbc75de39b646: hw/intc: Improve formatting of MEMTX_ERROR guest error message (2021-07-09 16:09:12 +0100) ---------------------------------------------------------------- target-arm queue: * New machine type: stm32vldiscovery * hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write * hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers * virt: Fix implementation of GPIO-based powerdown/shutdown mechanism * Correct the encoding of MDCCSR_EL0 and DBGDSCRint * hw/intc: Improve formatting of MEMTX_ERROR guest error message ---------------------------------------------------------------- Alexandre Iooss (4): stm32f100: Add the stm32f100 SoC stm32vldiscovery: Add the STM32VLDISCOVERY Machine docs/system: arm: Add stm32 boards description tests/boot-serial-test: Add STM32VLDISCOVERY board testcase Peter Maydell (10): hw/gpio/pl061: Convert DPRINTF to tracepoints hw/gpio/pl061: Clean up read/write offset handling logic hw/gpio/pl061: Add tracepoints for register read and write hw/gpio/pl061: Document the interface of this device hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers hw/gpio/pl061: Make pullup/pulldown of outputs configurable hw/arm/virt: Make PL061 GPIO lines pulled low, not high hw/gpio/pl061: Convert to 3-phase reset and assert GPIO lines correctly on reset hw/gpio/pl061: Document a shortcoming in our implementation hw/arm/stellaris: Expand comment about handling of OLED chipselect Rebecca Cran (1): hw/intc: Improve formatting of MEMTX_ERROR guest error message Ricardo Koller (1): hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write hnick@vmware.com (1): target/arm: Correct the encoding of MDCCSR_EL0 and DBGDSCRint docs/system/arm/stm32.rst | 66 +++++++ docs/system/target-arm.rst | 1 + default-configs/devices/arm-softmmu.mak | 1 + include/hw/arm/stm32f100_soc.h | 57 ++++++ hw/arm/stellaris.c | 56 +++++- hw/arm/stm32f100_soc.c | 182 +++++++++++++++++ hw/arm/stm32vldiscovery.c | 66 +++++++ hw/arm/virt.c | 3 + hw/gpio/pl061.c | 341 +++++++++++++++++++++++++------- hw/intc/arm_gicv3_cpuif.c | 4 +- hw/intc/arm_gicv3_redist.c | 4 +- target/arm/helper.c | 16 +- tests/qtest/boot-serial-test.c | 37 ++++ MAINTAINERS | 13 ++ hw/arm/Kconfig | 10 + hw/arm/meson.build | 2 + hw/gpio/trace-events | 9 + 17 files changed, 790 insertions(+), 78 deletions(-) create mode 100644 docs/system/arm/stm32.rst create mode 100644 include/hw/arm/stm32f100_soc.h create mode 100644 hw/arm/stm32f100_soc.c create mode 100644 hw/arm/stm32vldiscovery.c From: Alexandre Iooss <erdnaxe@crans.org> This SoC is similar to stm32f205 SoC. This will be used by the STM32VLDISCOVERY to create a machine. Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210617165647.2575955-2-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/stm32f100_soc.h | 57 +++++++++++ hw/arm/stm32f100_soc.c | 182 +++++++++++++++++++++++++++++++++ MAINTAINERS | 6 ++ hw/arm/Kconfig | 6 ++ hw/arm/meson.build | 1 + 5 files changed, 252 insertions(+) create mode 100644 include/hw/arm/stm32f100_soc.h create mode 100644 hw/arm/stm32f100_soc.c diff --git a/include/hw/arm/stm32f100_soc.h b/include/hw/arm/stm32f100_soc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/stm32f100_soc.h @@ -XXX,XX +XXX,XX @@ +/* + * STM32F100 SoC + * + * Copyright (c) 2021 Alexandre Iooss <erdnaxe@crans.org> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_ARM_STM32F100_SOC_H +#define HW_ARM_STM32F100_SOC_H + +#include "hw/char/stm32f2xx_usart.h" +#include "hw/ssi/stm32f2xx_spi.h" +#include "hw/arm/armv7m.h" +#include "qom/object.h" + +#define TYPE_STM32F100_SOC "stm32f100-soc" +OBJECT_DECLARE_SIMPLE_TYPE(STM32F100State, STM32F100_SOC) + +#define STM_NUM_USARTS 3 +#define STM_NUM_SPIS 2 + +#define FLASH_BASE_ADDRESS 0x08000000 +#define FLASH_SIZE (128 * 1024) +#define SRAM_BASE_ADDRESS 0x20000000 +#define SRAM_SIZE (8 * 1024) + +struct STM32F100State { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + char *cpu_type; + + ARMv7MState armv7m; + + STM32F2XXUsartState usart[STM_NUM_USARTS]; + STM32F2XXSPIState spi[STM_NUM_SPIS]; +}; + +#endif diff --git a/hw/arm/stm32f100_soc.c b/hw/arm/stm32f100_soc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/stm32f100_soc.c @@ -XXX,XX +XXX,XX @@ +/* + * STM32F100 SoC + * + * Copyright (c) 2021 Alexandre Iooss <erdnaxe@crans.org> + * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/module.h" +#include "hw/arm/boot.h" +#include "exec/address-spaces.h" +#include "hw/arm/stm32f100_soc.h" +#include "hw/qdev-properties.h" +#include "hw/misc/unimp.h" +#include "sysemu/sysemu.h" + +/* stm32f100_soc implementation is derived from stm32f205_soc */ + +static const uint32_t usart_addr[STM_NUM_USARTS] = { 0x40013800, 0x40004400, + 0x40004800 }; +static const uint32_t spi_addr[STM_NUM_SPIS] = { 0x40013000, 0x40003800 }; + +static const int usart_irq[STM_NUM_USARTS] = {37, 38, 39}; +static const int spi_irq[STM_NUM_SPIS] = {35, 36}; + +static void stm32f100_soc_initfn(Object *obj) +{ + STM32F100State *s = STM32F100_SOC(obj); + int i; + + object_initialize_child(obj, "armv7m", &s->armv7m, TYPE_ARMV7M); + + for (i = 0; i < STM_NUM_USARTS; i++) { + object_initialize_child(obj, "usart[*]", &s->usart[i], + TYPE_STM32F2XX_USART); + } + + for (i = 0; i < STM_NUM_SPIS; i++) { + object_initialize_child(obj, "spi[*]", &s->spi[i], TYPE_STM32F2XX_SPI); + } +} + +static void stm32f100_soc_realize(DeviceState *dev_soc, Error **errp) +{ + STM32F100State *s = STM32F100_SOC(dev_soc); + DeviceState *dev, *armv7m; + SysBusDevice *busdev; + int i; + + MemoryRegion *system_memory = get_system_memory(); + MemoryRegion *sram = g_new(MemoryRegion, 1); + MemoryRegion *flash = g_new(MemoryRegion, 1); + MemoryRegion *flash_alias = g_new(MemoryRegion, 1); + + /* + * Init flash region + * Flash starts at 0x08000000 and then is aliased to boot memory at 0x0 + */ + memory_region_init_rom(flash, OBJECT(dev_soc), "STM32F100.flash", + FLASH_SIZE, &error_fatal); + memory_region_init_alias(flash_alias, OBJECT(dev_soc), + "STM32F100.flash.alias", flash, 0, FLASH_SIZE); + memory_region_add_subregion(system_memory, FLASH_BASE_ADDRESS, flash); + memory_region_add_subregion(system_memory, 0, flash_alias); + + /* Init SRAM region */ + memory_region_init_ram(sram, NULL, "STM32F100.sram", SRAM_SIZE, + &error_fatal); + memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); + + /* Init ARMv7m */ + armv7m = DEVICE(&s->armv7m); + qdev_prop_set_uint32(armv7m, "num-irq", 61); + qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); + object_property_set_link(OBJECT(&s->armv7m), "memory", + OBJECT(get_system_memory()), &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->armv7m), errp)) { + return; + } + + /* Attach UART (uses USART registers) and USART controllers */ + for (i = 0; i < STM_NUM_USARTS; i++) { + dev = DEVICE(&(s->usart[i])); + qdev_prop_set_chr(dev, "chardev", serial_hd(i)); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->usart[i]), errp)) { + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, usart_addr[i]); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i])); + } + + /* SPI 1 and 2 */ + for (i = 0; i < STM_NUM_SPIS; i++) { + dev = DEVICE(&(s->spi[i])); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, spi_addr[i]); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, spi_irq[i])); + } + + create_unimplemented_device("timer[2]", 0x40000000, 0x400); + create_unimplemented_device("timer[3]", 0x40000400, 0x400); + create_unimplemented_device("timer[4]", 0x40000800, 0x400); + create_unimplemented_device("timer[6]", 0x40001000, 0x400); + create_unimplemented_device("timer[7]", 0x40001400, 0x400); + create_unimplemented_device("RTC", 0x40002800, 0x400); + create_unimplemented_device("WWDG", 0x40002C00, 0x400); + create_unimplemented_device("IWDG", 0x40003000, 0x400); + create_unimplemented_device("I2C1", 0x40005400, 0x400); + create_unimplemented_device("I2C2", 0x40005800, 0x400); + create_unimplemented_device("BKP", 0x40006C00, 0x400); + create_unimplemented_device("PWR", 0x40007000, 0x400); + create_unimplemented_device("DAC", 0x40007400, 0x400); + create_unimplemented_device("CEC", 0x40007800, 0x400); + create_unimplemented_device("AFIO", 0x40010000, 0x400); + create_unimplemented_device("EXTI", 0x40010400, 0x400); + create_unimplemented_device("GPIOA", 0x40010800, 0x400); + create_unimplemented_device("GPIOB", 0x40010C00, 0x400); + create_unimplemented_device("GPIOC", 0x40011000, 0x400); + create_unimplemented_device("GPIOD", 0x40011400, 0x400); + create_unimplemented_device("GPIOE", 0x40011800, 0x400); + create_unimplemented_device("ADC1", 0x40012400, 0x400); + create_unimplemented_device("timer[1]", 0x40012C00, 0x400); + create_unimplemented_device("timer[15]", 0x40014000, 0x400); + create_unimplemented_device("timer[16]", 0x40014400, 0x400); + create_unimplemented_device("timer[17]", 0x40014800, 0x400); + create_unimplemented_device("DMA", 0x40020000, 0x400); + create_unimplemented_device("RCC", 0x40021000, 0x400); + create_unimplemented_device("Flash Int", 0x40022000, 0x400); + create_unimplemented_device("CRC", 0x40023000, 0x400); +} + +static Property stm32f100_soc_properties[] = { + DEFINE_PROP_STRING("cpu-type", STM32F100State, cpu_type), + DEFINE_PROP_END_OF_LIST(), +}; + +static void stm32f100_soc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = stm32f100_soc_realize; + device_class_set_props(dc, stm32f100_soc_properties); +} + +static const TypeInfo stm32f100_soc_info = { + .name = TYPE_STM32F100_SOC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(STM32F100State), + .instance_init = stm32f100_soc_initfn, + .class_init = stm32f100_soc_class_init, +}; + +static void stm32f100_soc_types(void) +{ + type_register_static(&stm32f100_soc_info); +} + +type_init(stm32f100_soc_types) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Maintained F: hw/arm/virt-acpi-build.c +STM32F100 +M: Alexandre Iooss <erdnaxe@crans.org> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/stm32f100_soc.c + STM32F205 M: Alistair Francis <alistair@alistair23.me> M: Peter Maydell <peter.maydell@linaro.org> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config RASPI select SDHCI select USB_DWC2 +config STM32F100_SOC + bool + select ARM_V7M + select STM32F2XX_USART + select STM32F2XX_SPI + config STM32F205_SOC bool select ARM_V7M diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_STRONGARM', if_true: files('strongarm.c')) arm_ss.add(when: 'CONFIG_ALLWINNER_A10', if_true: files('allwinner-a10.c', 'cubieboard.c')) arm_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3.c', 'orangepi.c')) arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_peripherals.c', 'bcm2836.c', 'raspi.c')) +arm_ss.add(when: 'CONFIG_STM32F100_SOC', if_true: files('stm32f100_soc.c')) arm_ss.add(when: 'CONFIG_STM32F205_SOC', if_true: files('stm32f205_soc.c')) arm_ss.add(when: 'CONFIG_STM32F405_SOC', if_true: files('stm32f405_soc.c')) arm_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp.c', 'xlnx-zcu102.c')) -- 2.20.1 From: Alexandre Iooss <erdnaxe@crans.org> This is a Cortex-M3 based machine. Information can be found at: https://www.st.com/en/evaluation-tools/stm32vldiscovery.html Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210617165647.2575955-3-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- default-configs/devices/arm-softmmu.mak | 1 + hw/arm/stm32vldiscovery.c | 66 +++++++++++++++++++++++++ MAINTAINERS | 6 +++ hw/arm/Kconfig | 4 ++ hw/arm/meson.build | 1 + 5 files changed, 78 insertions(+) create mode 100644 hw/arm/stm32vldiscovery.c diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/devices/arm-softmmu.mak +++ b/default-configs/devices/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_CHEETAH=y CONFIG_SX1=y CONFIG_NSERIES=y CONFIG_STELLARIS=y +CONFIG_STM32VLDISCOVERY=y CONFIG_REALVIEW=y CONFIG_VERSATILE=y CONFIG_VEXPRESS=y diff --git a/hw/arm/stm32vldiscovery.c b/hw/arm/stm32vldiscovery.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/stm32vldiscovery.c @@ -XXX,XX +XXX,XX @@ +/* + * ST STM32VLDISCOVERY machine + * + * Copyright (c) 2021 Alexandre Iooss <erdnaxe@crans.org> + * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/boards.h" +#include "hw/qdev-properties.h" +#include "qemu/error-report.h" +#include "hw/arm/stm32f100_soc.h" +#include "hw/arm/boot.h" + +/* stm32vldiscovery implementation is derived from netduinoplus2 */ + +/* Main SYSCLK frequency in Hz (24MHz) */ +#define SYSCLK_FRQ 24000000ULL + +static void stm32vldiscovery_init(MachineState *machine) +{ + DeviceState *dev; + + /* + * TODO: ideally we would model the SoC RCC and let it handle + * system_clock_scale, including its ability to define different + * possible SYSCLK sources. + */ + system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ; + + dev = qdev_new(TYPE_STM32F100_SOC); + qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m3")); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), + machine->kernel_filename, + FLASH_SIZE); +} + +static void stm32vldiscovery_machine_init(MachineClass *mc) +{ + mc->desc = "ST STM32VLDISCOVERY (Cortex-M3)"; + mc->init = stm32vldiscovery_init; +} + +DEFINE_MACHINE("stm32vldiscovery", stm32vldiscovery_machine_init) + diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/*/stellaris* F: include/hw/input/gamepad.h F: docs/system/arm/stellaris.rst +STM32VLDISCOVERY +M: Alexandre Iooss <erdnaxe@crans.org> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/stm32vldiscovery.c + Versatile Express M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config STELLARIS select STELLARIS_ENET # ethernet select UNIMP +config STM32VLDISCOVERY + bool + select STM32F100_SOC + config STRONGARM bool select PXA2XX diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_Z2', if_true: files('z2.c')) arm_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview.c')) arm_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa-ref.c')) arm_ss.add(when: 'CONFIG_STELLARIS', if_true: files('stellaris.c')) +arm_ss.add(when: 'CONFIG_STM32VLDISCOVERY', if_true: files('stm32vldiscovery.c')) arm_ss.add(when: 'CONFIG_COLLIE', if_true: files('collie.c')) arm_ss.add(when: 'CONFIG_VERSATILE', if_true: files('versatilepb.c')) arm_ss.add(when: 'CONFIG_VEXPRESS', if_true: files('vexpress.c')) -- 2.20.1 From: Alexandre Iooss <erdnaxe@crans.org> This adds the target guide for Netduino 2, Netduino Plus 2 and STM32VLDISCOVERY. Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210617165647.2575955-4-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/stm32.rst | 66 ++++++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 68 insertions(+) create mode 100644 docs/system/arm/stm32.rst diff --git a/docs/system/arm/stm32.rst b/docs/system/arm/stm32.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/stm32.rst @@ -XXX,XX +XXX,XX @@ +STMicroelectronics STM32 boards (``netduino2``, ``netduinoplus2``, ``stm32vldiscovery``) +======================================================================================== + +The `STM32`_ chips are a family of 32-bit ARM-based microcontroller by +STMicroelectronics. + +.. _STM32: https://www.st.com/en/microcontrollers-microprocessors/stm32-32-bit-arm-cortex-mcus.html + +The STM32F1 series is based on ARM Cortex-M3 core. The following machines are +based on this chip : + +- ``stm32vldiscovery`` STM32VLDISCOVERY board with STM32F100RBT6 microcontroller + +The STM32F2 series is based on ARM Cortex-M3 core. The following machines are +based on this chip : + +- ``netduino2`` Netduino 2 board with STM32F205RFT6 microcontroller + +The STM32F4 series is based on ARM Cortex-M4F core. This series is pin-to-pin +compatible with STM32F2 series. The following machines are based on this chip : + +- ``netduinoplus2`` Netduino Plus 2 board with STM32F405RGT6 microcontroller + +There are many other STM32 series that are currently not supported by QEMU. + +Supported devices +----------------- + + * ARM Cortex-M3, Cortex M4F + * Analog to Digital Converter (ADC) + * EXTI interrupt + * Serial ports (USART) + * SPI controller + * System configuration (SYSCFG) + * Timer controller (TIMER) + +Missing devices +--------------- + + * Camera interface (DCMI) + * Controller Area Network (CAN) + * Cycle Redundancy Check (CRC) calculation unit + * Digital to Analog Converter (DAC) + * DMA controller + * Ethernet controller + * Flash Interface Unit + * GPIO controller + * I2C controller + * Inter-Integrated Sound (I2S) controller + * Power supply configuration (PWR) + * Random Number Generator (RNG) + * Real-Time Clock (RTC) controller + * Reset and Clock Controller (RCC) + * Secure Digital Input/Output (SDIO) interface + * USB OTG + * Watchdog controller (IWDG, WWDG) + +Boot options +------------ + +The STM32 machines can be started using the ``-kernel`` option to load a +firmware. Example: + +.. code-block:: bash + + $ qemu-system-arm -M stm32vldiscovery -kernel firmware.bin diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/collie arm/sx1 arm/stellaris + arm/stm32 arm/virt arm/xlnx-versal-virt diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Alexandre Iooss <erdnaxe@crans.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/stm32vldiscovery.c +F: docs/system/arm/stm32.rst Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Alexandre Iooss <erdnaxe@crans.org> New mini-kernel test for STM32VLDISCOVERY USART1. Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210617165647.2575955-5-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/boot-serial-test.c | 37 ++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/tests/qtest/boot-serial-test.c b/tests/qtest/boot-serial-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/boot-serial-test.c +++ b/tests/qtest/boot-serial-test.c @@ -XXX,XX +XXX,XX @@ static const uint8_t kernel_nrf51[] = { 0x1c, 0x25, 0x00, 0x40 /* 0x4000251c = UART TXD */ }; +static const uint8_t kernel_stm32vldiscovery[] = { + 0x00, 0x00, 0x00, 0x00, /* Stack top address */ + 0x1d, 0x00, 0x00, 0x00, /* Reset handler address */ + 0x00, 0x00, 0x00, 0x00, /* NMI */ + 0x00, 0x00, 0x00, 0x00, /* Hard fault */ + 0x00, 0x00, 0x00, 0x00, /* Memory management fault */ + 0x00, 0x00, 0x00, 0x00, /* Bus fault */ + 0x00, 0x00, 0x00, 0x00, /* Usage fault */ + 0x0b, 0x4b, /* ldr r3, [pc, #44] Get RCC */ + 0x44, 0xf2, 0x04, 0x02, /* movw r2, #16388 */ + 0x1a, 0x60, /* str r2, [r3] */ + 0x0a, 0x4b, /* ldr r3, [pc, #40] Get GPIOA */ + 0x1a, 0x68, /* ldr r2, [r3] */ + 0x22, 0xf0, 0xf0, 0x02, /* bic r2, r2, #240 */ + 0x1a, 0x60, /* str r2, [r3] */ + 0x1a, 0x68, /* ldr r2, [r3] */ + 0x42, 0xf0, 0xb0, 0x02, /* orr r2, r2, #176 */ + 0x1a, 0x60, /* str r2, [r3] */ + 0x07, 0x4b, /* ldr r3, [pc, #26] Get BAUD */ + 0x45, 0x22, /* movs r2, #69 */ + 0x1a, 0x60, /* str r2, [r3] */ + 0x06, 0x4b, /* ldr r3, [pc, #24] Get ENABLE */ + 0x42, 0xf2, 0x08, 0x02, /* movw r2, #8200 */ + 0x1a, 0x60, /* str r2, [r3] */ + 0x05, 0x4b, /* ldr r3, [pc, #20] Get TXD */ + 0x54, 0x22, /* movs r2, 'T' */ + 0x1a, 0x60, /* str r2, [r3] */ + 0xfe, 0xe7, /* b . */ + 0x18, 0x10, 0x02, 0x40, /* 0x40021018 = RCC */ + 0x04, 0x08, 0x01, 0x40, /* 0x40010804 = GPIOA */ + 0x08, 0x38, 0x01, 0x40, /* 0x40013808 = USART1 BAUD */ + 0x0c, 0x38, 0x01, 0x40, /* 0x4001380c = USART1 ENABLE */ + 0x04, 0x38, 0x01, 0x40 /* 0x40013804 = USART1 TXD */ +}; + typedef struct testdef { const char *arch; /* Target architecture */ const char *machine; /* Name of the machine */ @@ -XXX,XX +XXX,XX @@ static testdef_t tests[] = { { "aarch64", "virt", "-cpu max", "TT", sizeof(kernel_aarch64), kernel_aarch64 }, { "arm", "microbit", "", "T", sizeof(kernel_nrf51), kernel_nrf51 }, + { "arm", "stm32vldiscovery", "", "T", + sizeof(kernel_stm32vldiscovery), kernel_stm32vldiscovery }, { NULL } }; -- 2.20.1 From: Ricardo Koller <ricarkol@google.com> icv_eoir_write() and icv_dir_write() ignore invalid virtual IRQ numbers (like LPIs). The issue is that these functions check against the number of implemented IRQs (QEMU's default is num_irq=288) which can be lower than the maximum virtual IRQ number (1020 - 1). The consequence is that if a hypervisor creates an LR for an IRQ between 288 and 1020, then the guest is unable to deactivate the resulting IRQ. Note that other functions that deal with large IRQ numbers, like icv_iar_read, check against 1020 and not against num_irq. Fix the checks by using GICV3_MAXIRQ (1020) instead of the number of implemented IRQs. Signed-off-by: Ricardo Koller <ricarkol@google.com> Message-id: 20210702233701.3369-1-ricarkol@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void icv_dir_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_icv_dir_write(gicv3_redist_affid(cs), value); - if (irq >= cs->gic->num_irq) { + if (irq >= GICV3_MAXIRQ) { /* Also catches special interrupt numbers and LPIs */ return; } @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_icv_eoir_write(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), value); - if (irq >= cs->gic->num_irq) { + if (irq >= GICV3_MAXIRQ) { /* Also catches special interrupt numbers and LPIs */ return; } -- 2.20.1 Convert the use of the DPRINTF debug macro in the PL061 model to use tracepoints. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- hw/gpio/pl061.c | 27 +++++++++------------------ hw/gpio/trace-events | 6 ++++++ 2 files changed, 15 insertions(+), 18 deletions(-) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qemu/module.h" #include "qom/object.h" - -//#define DEBUG_PL061 1 - -#ifdef DEBUG_PL061 -#define DPRINTF(fmt, ...) \ -do { printf("pl061: " fmt , ## __VA_ARGS__); } while (0) -#define BADF(fmt, ...) \ -do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__); exit(1);} while (0) -#else -#define DPRINTF(fmt, ...) do {} while(0) -#define BADF(fmt, ...) \ -do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__);} while (0) -#endif +#include "trace.h" static const uint8_t pl061_id[12] = { 0x00, 0x00, 0x00, 0x00, 0x61, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) uint8_t out; int i; - DPRINTF("dir = %d, data = %d\n", s->dir, s->data); + trace_pl061_update(DEVICE(s)->canonical_path, s->dir, s->data); /* Outputs float high. */ /* FIXME: This is board dependent. */ @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { - DPRINTF("Set output %d = %d\n", i, (out & mask) != 0); - qemu_set_irq(s->out[i], (out & mask) != 0); + int level = (out & mask) != 0; + trace_pl061_set_output(DEVICE(s)->canonical_path, i, level); + qemu_set_irq(s->out[i], level); } } } @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { - DPRINTF("Changed input %d = %d\n", i, (s->data & mask) != 0); + trace_pl061_input_change(DEVICE(s)->canonical_path, i, + (s->data & mask) != 0); if (!(s->isense & mask)) { /* Edge interrupt */ @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) /* Level interrupt */ s->istate |= ~(s->data ^ s->iev) & s->isense; - DPRINTF("istate = %02X\n", s->istate); + trace_pl061_update_istate(DEVICE(s)->canonical_path, + s->istate, s->im, (s->istate & s->im) != 0); qemu_set_irq(s->irq, (s->istate & s->im) != 0); } diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -XXX,XX +XXX,XX @@ nrf51_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x nrf51_gpio_set(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 nrf51_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 +# pl061.c +pl061_update(const char *id, uint32_t dir, uint32_t data) "%s GPIODIR 0x%x GPIODATA 0x%x" +pl061_set_output(const char *id, int gpio, int level) "%s setting output %d to %d" +pl061_input_change(const char *id, int gpio, int level) "%s input %d changed to %d" +pl061_update_istate(const char *id, uint32_t istate, uint32_t im, int level) "%s GPIORIS 0x%x GPIOIE 0x%x interrupt level %d" + # sifive_gpio.c sifive_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64 sifive_gpio_write(uint64_t offset, uint64_t value) "offset 0x%" PRIx64 " value 0x%" PRIx64 -- 2.20.1 Currently the pl061_read() and pl061_write() functions handle offsets using a combination of three if() statements and a switch(). Clean this up to use just a switch, using case ranges. This requires that instead of catching accesses to the luminary-only registers on a stock PL061 via a check on s->rsvd_start we use an "is this luminary?" check in the cases for each luminary-only register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- hw/gpio/pl061.c | 104 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 79 insertions(+), 25 deletions(-) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ struct PL061State { qemu_irq irq; qemu_irq out[N_GPIOS]; const unsigned char *id; - uint32_t rsvd_start; /* reserved area: [rsvd_start, 0xfcc] */ }; static const VMStateDescription vmstate_pl061 = { @@ -XXX,XX +XXX,XX @@ static uint64_t pl061_read(void *opaque, hwaddr offset, { PL061State *s = (PL061State *)opaque; - if (offset < 0x400) { - return s->data & (offset >> 2); - } - if (offset >= s->rsvd_start && offset <= 0xfcc) { - goto err_out; - } - if (offset >= 0xfd0 && offset < 0x1000) { - return s->id[(offset - 0xfd0) >> 2]; - } switch (offset) { + case 0x0 ... 0x3ff: /* Data */ + return s->data & (offset >> 2); case 0x400: /* Direction */ return s->dir; case 0x404: /* Interrupt sense */ @@ -XXX,XX +XXX,XX @@ static uint64_t pl061_read(void *opaque, hwaddr offset, case 0x420: /* Alternate function select */ return s->afsel; case 0x500: /* 2mA drive */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->dr2r; case 0x504: /* 4mA drive */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->dr4r; case 0x508: /* 8mA drive */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->dr8r; case 0x50c: /* Open drain */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->odr; case 0x510: /* Pull-up */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->pur; case 0x514: /* Pull-down */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->pdr; case 0x518: /* Slew rate control */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->slr; case 0x51c: /* Digital enable */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->den; case 0x520: /* Lock */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->locked; case 0x524: /* Commit */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->cr; case 0x528: /* Analog mode select */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } return s->amsel; + case 0xfd0 ... 0xfff: /* ID registers */ + return s->id[(offset - 0xfd0) >> 2]; default: + bad_offset: + qemu_log_mask(LOG_GUEST_ERROR, + "pl061_read: Bad offset %x\n", (int)offset); break; } -err_out: - qemu_log_mask(LOG_GUEST_ERROR, - "pl061_read: Bad offset %x\n", (int)offset); return 0; } @@ -XXX,XX +XXX,XX @@ static void pl061_write(void *opaque, hwaddr offset, PL061State *s = (PL061State *)opaque; uint8_t mask; - if (offset < 0x400) { + switch (offset) { + case 0 ... 0x3ff: mask = (offset >> 2) & s->dir; s->data = (s->data & ~mask) | (value & mask); pl061_update(s); return; - } - if (offset >= s->rsvd_start) { - goto err_out; - } - switch (offset) { case 0x400: /* Direction */ s->dir = value & 0xff; break; @@ -XXX,XX +XXX,XX @@ static void pl061_write(void *opaque, hwaddr offset, s->afsel = (s->afsel & ~mask) | (value & mask); break; case 0x500: /* 2mA drive */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->dr2r = value & 0xff; break; case 0x504: /* 4mA drive */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->dr4r = value & 0xff; break; case 0x508: /* 8mA drive */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->dr8r = value & 0xff; break; case 0x50c: /* Open drain */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->odr = value & 0xff; break; case 0x510: /* Pull-up */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->pur = value & 0xff; break; case 0x514: /* Pull-down */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->pdr = value & 0xff; break; case 0x518: /* Slew rate control */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->slr = value & 0xff; break; case 0x51c: /* Digital enable */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->den = value & 0xff; break; case 0x520: /* Lock */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->locked = (value != 0xacce551); break; case 0x524: /* Commit */ + if (s->id != pl061_id_luminary) { + goto bad_offset; + } if (!s->locked) s->cr = value & 0xff; break; case 0x528: + if (s->id != pl061_id_luminary) { + goto bad_offset; + } s->amsel = value & 0xff; break; default: - goto err_out; + bad_offset: + qemu_log_mask(LOG_GUEST_ERROR, + "pl061_write: Bad offset %x\n", (int)offset); + return; } pl061_update(s); return; -err_out: - qemu_log_mask(LOG_GUEST_ERROR, - "pl061_write: Bad offset %x\n", (int)offset); } static void pl061_reset(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void pl061_luminary_init(Object *obj) PL061State *s = PL061(obj); s->id = pl061_id_luminary; - s->rsvd_start = 0x52c; } static void pl061_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void pl061_init(Object *obj) SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->id = pl061_id; - s->rsvd_start = 0x424; memory_region_init_io(&s->iomem, obj, &pl061_ops, s, "pl061", 0x1000); sysbus_init_mmio(sbd, &s->iomem); -- 2.20.1 Add tracepoints for reads and writes to the PL061 registers. This requires restructuring pl061_read() to only return after the tracepoint, rather than having lots of early-returns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- hw/gpio/pl061.c | 70 ++++++++++++++++++++++++++++++-------------- hw/gpio/trace-events | 2 ++ 2 files changed, 50 insertions(+), 22 deletions(-) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static uint64_t pl061_read(void *opaque, hwaddr offset, unsigned size) { PL061State *s = (PL061State *)opaque; + uint64_t r = 0; switch (offset) { case 0x0 ... 0x3ff: /* Data */ - return s->data & (offset >> 2); + r = s->data & (offset >> 2); + break; case 0x400: /* Direction */ - return s->dir; + r = s->dir; + break; case 0x404: /* Interrupt sense */ - return s->isense; + r = s->isense; + break; case 0x408: /* Interrupt both edges */ - return s->ibe; + r = s->ibe; + break; case 0x40c: /* Interrupt event */ - return s->iev; + r = s->iev; + break; case 0x410: /* Interrupt mask */ - return s->im; + r = s->im; + break; case 0x414: /* Raw interrupt status */ - return s->istate; + r = s->istate; + break; case 0x418: /* Masked interrupt status */ - return s->istate & s->im; + r = s->istate & s->im; + break; case 0x420: /* Alternate function select */ - return s->afsel; + r = s->afsel; + break; case 0x500: /* 2mA drive */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->dr2r; + r = s->dr2r; + break; case 0x504: /* 4mA drive */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->dr4r; + r = s->dr4r; + break; case 0x508: /* 8mA drive */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->dr8r; + r = s->dr8r; + break; case 0x50c: /* Open drain */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->odr; + r = s->odr; + break; case 0x510: /* Pull-up */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->pur; + r = s->pur; + break; case 0x514: /* Pull-down */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->pdr; + r = s->pdr; + break; case 0x518: /* Slew rate control */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->slr; + r = s->slr; + break; case 0x51c: /* Digital enable */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->den; + r = s->den; + break; case 0x520: /* Lock */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->locked; + r = s->locked; + break; case 0x524: /* Commit */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->cr; + r = s->cr; + break; case 0x528: /* Analog mode select */ if (s->id != pl061_id_luminary) { goto bad_offset; } - return s->amsel; + r = s->amsel; + break; case 0xfd0 ... 0xfff: /* ID registers */ - return s->id[(offset - 0xfd0) >> 2]; + r = s->id[(offset - 0xfd0) >> 2]; + break; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "pl061_read: Bad offset %x\n", (int)offset); break; } - return 0; + + trace_pl061_read(DEVICE(s)->canonical_path, offset, r); + return r; } static void pl061_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void pl061_write(void *opaque, hwaddr offset, PL061State *s = (PL061State *)opaque; uint8_t mask; + trace_pl061_write(DEVICE(s)->canonical_path, offset, value); + switch (offset) { case 0 ... 0x3ff: mask = (offset >> 2) & s->dir; diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -XXX,XX +XXX,XX @@ pl061_update(const char *id, uint32_t dir, uint32_t data) "%s GPIODIR 0x%x GPIOD pl061_set_output(const char *id, int gpio, int level) "%s setting output %d to %d" pl061_input_change(const char *id, int gpio, int level) "%s input %d changed to %d" pl061_update_istate(const char *id, uint32_t istate, uint32_t im, int level) "%s GPIORIS 0x%x GPIOIE 0x%x interrupt level %d" +pl061_read(const char *id, uint64_t offset, uint64_t r) "%s offset 0x%" PRIx64 " value 0x%" PRIx64 +pl061_write(const char *id, uint64_t offset, uint64_t value) "%s offset 0x%" PRIx64 " value 0x%" PRIx64 # sifive_gpio.c sifive_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64 -- 2.20.1 Add a comment documenting the "QEMU interface" of this device: which MMIO regions, IRQ lines, GPIO lines, etc it exposes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- hw/gpio/pl061.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ * Written by Paul Brook * * This code is licensed under the GPL. + * + * QEMU interface: + * + sysbus MMIO region 0: the device registers + * + sysbus IRQ: the GPIOINTR interrupt line + * + unnamed GPIO inputs 0..7: inputs to connect to the emulated GPIO lines + * + unnamed GPIO outputs 0..7: the emulated GPIO lines, considered as + * outputs */ #include "qemu/osdep.h" -- 2.20.1 The Luminary variant of the PL061 has registers GPIOPUR and GPIOPDR which lets the guest configure whether the GPIO lines are pull-up, pull-down, or truly floating. Instead of assuming all lines are pulled high, honour the PUR and PDR registers. For the plain PL061, continue to assume that lines have an external pull-up resistor, as we did before. The stellaris board actually relies on this behaviour -- the CD line of the ssd0323 display device is connected to GPIO output C7, and it is only because of a different bug which we're about to fix that we weren't incorrectly driving this line high on reset and putting the ssd0323 into data mode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- hw/gpio/pl061.c | 58 +++++++++++++++++++++++++++++++++++++++++--- hw/gpio/trace-events | 2 +- 2 files changed, 55 insertions(+), 5 deletions(-) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_pl061 = { } }; +static uint8_t pl061_floating(PL061State *s) +{ + /* + * Return mask of bits which correspond to pins configured as inputs + * and which are floating (neither pulled up to 1 nor down to 0). + */ + uint8_t floating; + + if (s->id == pl061_id_luminary) { + /* + * If both PUR and PDR bits are clear, there is neither a pullup + * nor a pulldown in place, and the output truly floats. + */ + floating = ~(s->pur | s->pdr); + } else { + /* Assume outputs are pulled high. FIXME: this is board dependent. */ + floating = 0; + } + return floating & ~s->dir; +} + +static uint8_t pl061_pullups(PL061State *s) +{ + /* + * Return mask of bits which correspond to pins configured as inputs + * and which are pulled up to 1. + */ + uint8_t pullups; + + if (s->id == pl061_id_luminary) { + /* + * The Luminary variant of the PL061 has an extra registers which + * the guest can use to configure whether lines should be pullup + * or pulldown. + */ + pullups = s->pur; + } else { + /* Assume outputs are pulled high. FIXME: this is board dependent. */ + pullups = 0xff; + } + return pullups & ~s->dir; +} + static void pl061_update(PL061State *s) { uint8_t changed; uint8_t mask; uint8_t out; int i; + uint8_t pullups = pl061_pullups(s); + uint8_t floating = pl061_floating(s); - trace_pl061_update(DEVICE(s)->canonical_path, s->dir, s->data); + trace_pl061_update(DEVICE(s)->canonical_path, s->dir, s->data, + pullups, floating); - /* Outputs float high. */ - /* FIXME: This is board dependent. */ - out = (s->data & s->dir) | ~s->dir; + /* + * Pins configured as output are driven from the data register; + * otherwise if they're pulled up they're 1, and if they're floating + * then we give them the same value they had previously, so we don't + * report any change to the other end. + */ + out = (s->data & s->dir) | pullups | (s->old_out_data & floating); changed = s->old_out_data ^ out; if (changed) { s->old_out_data = out; diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -XXX,XX +XXX,XX @@ nrf51_gpio_set(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 nrf51_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " value %" PRIi64 # pl061.c -pl061_update(const char *id, uint32_t dir, uint32_t data) "%s GPIODIR 0x%x GPIODATA 0x%x" +pl061_update(const char *id, uint32_t dir, uint32_t data, uint32_t pullups, uint32_t floating) "%s GPIODIR 0x%x GPIODATA 0x%x pullups 0x%x floating 0x%x" pl061_set_output(const char *id, int gpio, int level) "%s setting output %d to %d" pl061_input_change(const char *id, int gpio, int level) "%s input %d changed to %d" pl061_update_istate(const char *id, uint32_t istate, uint32_t im, int level) "%s GPIORIS 0x%x GPIOIE 0x%x interrupt level %d" -- 2.20.1 The PL061 GPIO does not itself include pullup or pulldown resistors to set the value of a GPIO line treated as an output when it is configured as an input (ie when the PL061 itself is not driving it). In real hardware it is up to the board to add suitable pullups or pulldowns. Currently our implementation hardwires this to "outputs pulled high", which is correct for some boards (eg the realview ones: see figure 3-29 in the "RealView Platform Baseboard for ARM926EJ-S User Guide" DUI0224I), but wrong for others. In particular, the wiring in the 'virt' board and the gpio-pwr device assumes that wires should be pulled low, because otherwise the pull-to-high will trigger a shutdown or reset action. (The only reason this doesn't happen immediately on startup is due to another bug in the PL061, where we don't assert the GPIOs to the correct value on reset, but will do so as soon as the guest touches a register and pl061_update() gets called.) Add properties to the pl061 so the board can configure whether it wants GPIO lines to have pullup, pulldown, or neither. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- hw/gpio/pl061.c | 51 +++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 47 insertions(+), 4 deletions(-) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ * + unnamed GPIO inputs 0..7: inputs to connect to the emulated GPIO lines * + unnamed GPIO outputs 0..7: the emulated GPIO lines, considered as * outputs + * + QOM property "pullups": an integer defining whether non-floating lines + * configured as inputs should be pulled up to logical 1 (ie whether in + * real hardware they have a pullup resistor on the line out of the PL061). + * This should be an 8-bit value, where bit 0 is 1 if GPIO line 0 should + * be pulled high, bit 1 configures line 1, and so on. The default is 0xff, + * indicating that all GPIO lines are pulled up to logical 1. + * + QOM property "pulldowns": an integer defining whether non-floating lines + * configured as inputs should be pulled down to logical 0 (ie whether in + * real hardware they have a pulldown resistor on the line out of the PL061). + * This should be an 8-bit value, where bit 0 is 1 if GPIO line 0 should + * be pulled low, bit 1 configures line 1, and so on. The default is 0x0. + * It is an error to set a bit in both "pullups" and "pulldowns". If a bit + * is 0 in both, then the line is considered to be floating, and it will + * not have qemu_set_irq() called on it when it is configured as an input. */ #include "qemu/osdep.h" #include "hw/irq.h" #include "hw/sysbus.h" +#include "hw/qdev-properties.h" #include "migration/vmstate.h" +#include "qapi/error.h" #include "qemu/log.h" #include "qemu/module.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct PL061State { qemu_irq irq; qemu_irq out[N_GPIOS]; const unsigned char *id; + /* Properties, for non-Luminary PL061 */ + uint32_t pullups; + uint32_t pulldowns; }; static const VMStateDescription vmstate_pl061 = { @@ -XXX,XX +XXX,XX @@ static uint8_t pl061_floating(PL061State *s) */ floating = ~(s->pur | s->pdr); } else { - /* Assume outputs are pulled high. FIXME: this is board dependent. */ - floating = 0; + floating = ~(s->pullups | s->pulldowns); } return floating & ~s->dir; } @@ -XXX,XX +XXX,XX @@ static uint8_t pl061_pullups(PL061State *s) */ pullups = s->pur; } else { - /* Assume outputs are pulled high. FIXME: this is board dependent. */ - pullups = 0xff; + pullups = s->pullups; } return pullups & ~s->dir; } @@ -XXX,XX +XXX,XX @@ static void pl061_init(Object *obj) qdev_init_gpio_out(dev, s->out, N_GPIOS); } +static void pl061_realize(DeviceState *dev, Error **errp) +{ + PL061State *s = PL061(dev); + + if (s->pullups > 0xff) { + error_setg(errp, "pullups property must be between 0 and 0xff"); + return; + } + if (s->pulldowns > 0xff) { + error_setg(errp, "pulldowns property must be between 0 and 0xff"); + return; + } + if (s->pullups & s->pulldowns) { + error_setg(errp, "no bit may be set both in pullups and pulldowns"); + return; + } +} + +static Property pl061_props[] = { + DEFINE_PROP_UINT32("pullups", PL061State, pullups, 0xff), + DEFINE_PROP_UINT32("pulldowns", PL061State, pulldowns, 0x0), + DEFINE_PROP_END_OF_LIST() +}; + static void pl061_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_pl061; dc->reset = &pl061_reset; + dc->realize = pl061_realize; + device_class_set_props(dc, pl061_props); } static const TypeInfo pl061_info = { -- 2.20.1 For the virt board we have two PL061 devices -- one for NonSecure which is inputs only, and one for Secure which is outputs only. For the former, we don't care whether its outputs are pulled low or high when the line is configured as an input, because we don't connect them. For the latter, we do care, because we wire the lines up to the gpio-pwr device, which assumes that level 1 means "do the action" and 1 means "do nothing". For consistency in case we add more outputs in future, configure both PL061s to pull GPIO lines down to 0. Reported-by: Maxim Uvarov <maxim.uvarov@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- hw/arm/virt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, MachineState *ms = MACHINE(vms); pl061_dev = qdev_new("pl061"); + /* Pull lines down to 0 if not driven by the PL061 */ + qdev_prop_set_uint32(pl061_dev, "pullups", 0); + qdev_prop_set_uint32(pl061_dev, "pulldowns", 0xff); s = SYS_BUS_DEVICE(pl061_dev); sysbus_realize_and_unref(s, &error_fatal); memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); -- 2.20.1 The PL061 comes out of reset with all its lines configured as input, which means they might need to be pulled to 0 or 1 depending on the 'pullups' and 'pulldowns' properties. Currently we do not assert these lines on reset; they will only be set whenever the guest first touches a register that triggers a call to pl061_update(). Convert the device to three-phase reset so we have a place where we can safely call qemu_set_irq() to set the floating lines to their correct values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- hw/gpio/pl061.c | 29 +++++++++++++++++++++++++---- hw/gpio/trace-events | 1 + 2 files changed, 26 insertions(+), 4 deletions(-) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static void pl061_write(void *opaque, hwaddr offset, return; } -static void pl061_reset(DeviceState *dev) +static void pl061_enter_reset(Object *obj, ResetType type) { - PL061State *s = PL061(dev); + PL061State *s = PL061(obj); + + trace_pl061_reset(DEVICE(s)->canonical_path); /* reset values from PL061 TRM, Stellaris LM3S5P31 & LM3S8962 Data Sheet */ s->data = 0; - s->old_out_data = 0; s->old_in_data = 0; s->dir = 0; s->isense = 0; @@ -XXX,XX +XXX,XX @@ static void pl061_reset(DeviceState *dev) s->amsel = 0; } +static void pl061_hold_reset(Object *obj) +{ + PL061State *s = PL061(obj); + int i, level; + uint8_t floating = pl061_floating(s); + uint8_t pullups = pl061_pullups(s); + + for (i = 0; i < N_GPIOS; i++) { + if (extract32(floating, i, 1)) { + continue; + } + level = extract32(pullups, i, 1); + trace_pl061_set_output(DEVICE(s)->canonical_path, i, level); + qemu_set_irq(s->out[i], level); + } + s->old_out_data = pullups; +} + static void pl061_set_irq(void * opaque, int irq, int level) { PL061State *s = (PL061State *)opaque; @@ -XXX,XX +XXX,XX @@ static Property pl061_props[] = { static void pl061_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); dc->vmsd = &vmstate_pl061; - dc->reset = &pl061_reset; dc->realize = pl061_realize; device_class_set_props(dc, pl061_props); + rc->phases.enter = pl061_enter_reset; + rc->phases.hold = pl061_hold_reset; } static const TypeInfo pl061_info = { diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -XXX,XX +XXX,XX @@ pl061_input_change(const char *id, int gpio, int level) "%s input %d changed to pl061_update_istate(const char *id, uint32_t istate, uint32_t im, int level) "%s GPIORIS 0x%x GPIOIE 0x%x interrupt level %d" pl061_read(const char *id, uint64_t offset, uint64_t r) "%s offset 0x%" PRIx64 " value 0x%" PRIx64 pl061_write(const char *id, uint64_t offset, uint64_t value) "%s offset 0x%" PRIx64 " value 0x%" PRIx64 +pl061_reset(const char *id) "%s reset" # sifive_gpio.c sifive_gpio_read(uint64_t offset, uint64_t r) "offset 0x%" PRIx64 " value 0x%" PRIx64 -- 2.20.1 The Luminary PL061s in the Stellaris LM3S9695 don't all have the same reset value for GPIOPUR. We can get away with not letting the board configure the PUR reset value because we don't actually wire anything up to the lines which should reset to pull-up. Add a comment noting this omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/gpio/pl061.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static void pl061_enter_reset(Object *obj, ResetType type) trace_pl061_reset(DEVICE(s)->canonical_path); /* reset values from PL061 TRM, Stellaris LM3S5P31 & LM3S8962 Data Sheet */ + + /* + * FIXME: For the LM3S6965, not all of the PL061 instances have the + * same reset values for GPIOPUR, GPIOAFSEL and GPIODEN, so in theory + * we should allow the board to configure these via properties. + * In practice, we don't wire anything up to the affected GPIO lines + * (PB7, PC0, PC1, PC2, PC3 -- they're used for JTAG), so we can + * get away with this inaccuracy. + */ s->data = 0; s->old_in_data = 0; s->dir = 0; -- 2.20.1 The stellaris board doesn't emulate the handling of the OLED chipselect line correctly. Expand the comment describing this, including a sketch of the theoretical correct way to do it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 56 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 55 insertions(+), 1 deletion(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *sddev; DeviceState *ssddev; - /* Some boards have both an OLED controller and SD card connected to + /* + * Some boards have both an OLED controller and SD card connected to * the same SSI port, with the SD card chip select connected to a * GPIO pin. Technically the OLED chip select is connected to the * SSI Fss pin. We do not bother emulating that as both devices * should never be selected simultaneously, and our OLED controller * ignores stray 0xff commands that occur when deselecting the SD * card. + * + * The h/w wiring is: + * - GPIO pin D0 is wired to the active-low SD card chip select + * - GPIO pin A3 is wired to the active-low OLED chip select + * - The SoC wiring of the PL061 "auxiliary function" for A3 is + * SSI0Fss ("frame signal"), which is an output from the SoC's + * SSI controller. The SSI controller takes SSI0Fss low when it + * transmits a frame, so it can work as a chip-select signal. + * - GPIO A4 is aux-function SSI0Rx, and wired to the SD card Tx + * (the OLED never sends data to the CPU, so no wiring needed) + * - GPIO A5 is aux-function SSI0Tx, and wired to the SD card Rx + * and the OLED display-data-in + * - GPIO A2 is aux-function SSI0Clk, wired to SD card and OLED + * serial-clock input + * So a guest that wants to use the OLED can configure the PL061 + * to make pins A2, A3, A5 aux-function, so they are connected + * directly to the SSI controller. When the SSI controller sends + * data it asserts SSI0Fss which selects the OLED. + * A guest that wants to use the SD card configures A2, A4 and A5 + * as aux-function, but leaves A3 as a software-controlled GPIO + * line. It asserts the SD card chip-select by using the PL061 + * to control pin D0, and lets the SSI controller handle Clk, Tx + * and Rx. (The SSI controller asserts Fss during tx cycles as + * usual, but because A3 is not set to aux-function this is not + * forwarded to the OLED, and so the OLED stays unselected.) + * + * The QEMU implementation instead is: + * - GPIO pin D0 is wired to the active-low SD card chip select, + * and also to the OLED chip-select which is implemented + * as *active-high* + * - SSI controller signals go to the devices regardless of + * whether the guest programs A2, A4, A5 as aux-function or not + * + * The problem with this implementation is if the guest doesn't + * care about the SD card and only uses the OLED. In that case it + * may choose never to do anything with D0 (leaving it in its + * default floating state, which reliably leaves the card disabled + * because an SD card has a pullup on CS within the card itself), + * and only set up A2, A3, A5. This for us would mean the OLED + * never gets the chip-select assert it needs. We work around + * this with a manual raise of D0 here (despite board creation + * code being the wrong place to raise IRQ lines) to put the OLED + * into an initially selected state. + * + * In theory the right way to model this would be: + * - Implement aux-function support in the PL061, with an + * extra set of AFIN and AFOUT GPIO lines (set up so that + * if a GPIO line is in auxfn mode the main GPIO in and out + * track the AFIN and AFOUT lines) + * - Wire the AFOUT for D0 up to either a line from the + * SSI controller that's pulled low around every transmit, + * or at least to an always-0 line here on the board + * - Make the ssd0323 OLED controller chipselect active-low */ bus = qdev_get_child_bus(dev, "ssi"); -- 2.20.1 From: "hnick@vmware.com" <hnick@vmware.com> Signed-off-by: Nick Hudson <hnick@vmware.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .access = PL1_RW, .accessfn = access_tda, .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1), .resetvalue = 0 }, - /* MDCCSR_EL0, aka DBGDSCRint. This is a read-only mirror of MDSCR_EL1. + /* + * MDCCSR_EL0[30:29] map to EDSCR[30:29]. Simply RAZ as the external + * Debug Communication Channel is not implemented. + */ + { .name = "MDCCSR_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 1, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = 0 }, + /* + * DBGDSCRint[15,12,5:2] map to MDSCR_EL1[15,12,5:2]. Map all bits as + * it is unlikely a guest will care. * We don't implement the configurable EL0 access. */ - { .name = "MDCCSR_EL0", .state = ARM_CP_STATE_BOTH, - .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0, + { .name = "DBGDSCRint", .state = ARM_CP_STATE_AA32, + .cp = 14, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0, .type = ARM_CP_ALIAS, .access = PL1_R, .accessfn = access_tda, .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1), }, -- 2.20.1 From: Rebecca Cran <rebecca@nuviainc.com> Add a space in the message printed when gicr_read*/gicr_write* returns MEMTX_ERROR in arm_gicv3_redist.c. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210706211432.31902-1-rebecca@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_redist.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -XXX,XX +XXX,XX @@ MemTxResult gicv3_redist_read(void *opaque, hwaddr offset, uint64_t *data, if (r == MEMTX_ERROR) { qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid guest read at offset " TARGET_FMT_plx - "size %u\n", __func__, offset, size); + " size %u\n", __func__, offset, size); trace_gicv3_redist_badread(gicv3_redist_affid(cs), offset, size, attrs.secure); /* The spec requires that reserved registers are RAZ/WI; @@ -XXX,XX +XXX,XX @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data, if (r == MEMTX_ERROR) { qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid guest write at offset " TARGET_FMT_plx - "size %u\n", __func__, offset, size); + " size %u\n", __func__, offset, size); trace_gicv3_redist_badwrite(gicv3_redist_affid(cs), offset, data, size, attrs.secure); /* The spec requires that reserved registers are RAZ/WI; -- 2.20.1 target-arm queue: the big stuff here is the final part of rth's patches for Cortex-A76 and Neoverse-N1 support; also present are Gavin's NUMA series and a few other things. thanks -- PMM The following changes since commit 554623226f800acf48a2ed568900c1c968ec9a8b: Merge tag 'qemu-sparc-20220508' of https://github.com/mcayland/qemu into staging (2022-05-08 17:03:26 -0500) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220509 for you to fetch changes up to ae9141d4a3265553503bf07d3574b40f84615a34: hw/acpi/aml-build: Use existing CPU topology to build PPTT table (2022-05-09 11:47:55 +0100) ---------------------------------------------------------------- target-arm queue: * MAINTAINERS/.mailmap: update email for Leif Lindholm * hw/arm: add version information to sbsa-ref machine DT * Enable new features for -cpu max: FEAT_Debugv8p2, FEAT_Debugv8p4, FEAT_RAS (minimal version only), FEAT_IESB, FEAT_CSV2, FEAT_CSV2_2, FEAT_CSV3, FEAT_DGH * Emulate Cortex-A76 * Emulate Neoverse-N1 * Fix the virt board default NUMA topology ---------------------------------------------------------------- Gavin Shan (6): qapi/machine.json: Add cluster-id qtest/numa-test: Specify CPU topology in aarch64_numa_cpu() hw/arm/virt: Consider SMP configuration in CPU topology qtest/numa-test: Correct CPU and NUMA association in aarch64_numa_cpu() hw/arm/virt: Fix CPU's default NUMA node ID hw/acpi/aml-build: Use existing CPU topology to build PPTT table Leif Lindholm (2): MAINTAINERS/.mailmap: update email for Leif Lindholm hw/arm: add versioning to sbsa-ref machine DT Richard Henderson (24): target/arm: Handle cpreg registration for missing EL target/arm: Drop EL3 no EL2 fallbacks target/arm: Merge zcr reginfo target/arm: Adjust definition of CONTEXTIDR_EL2 target/arm: Move cortex impdef sysregs to cpu_tcg.c target/arm: Update qemu-system-arm -cpu max to cortex-a57 target/arm: Set ID_DFR0.PerfMon for qemu-system-arm -cpu max target/arm: Split out aa32_max_features target/arm: Annotate arm_max_initfn with FEAT identifiers target/arm: Use field names for manipulating EL2 and EL3 modes target/arm: Enable FEAT_Debugv8p2 for -cpu max target/arm: Enable FEAT_Debugv8p4 for -cpu max target/arm: Add minimal RAS registers target/arm: Enable SCR and HCR bits for RAS target/arm: Implement virtual SError exceptions target/arm: Implement ESB instruction target/arm: Enable FEAT_RAS for -cpu max target/arm: Enable FEAT_IESB for -cpu max target/arm: Enable FEAT_CSV2 for -cpu max target/arm: Enable FEAT_CSV2_2 for -cpu max target/arm: Enable FEAT_CSV3 for -cpu max target/arm: Enable FEAT_DGH for -cpu max target/arm: Define cortex-a76 target/arm: Define neoverse-n1 docs/system/arm/emulation.rst | 10 + docs/system/arm/virt.rst | 2 + qapi/machine.json | 6 +- target/arm/cpregs.h | 11 + target/arm/cpu.h | 23 ++ target/arm/helper.h | 1 + target/arm/internals.h | 16 ++ target/arm/syndrome.h | 5 + target/arm/a32.decode | 16 +- target/arm/t32.decode | 18 +- hw/acpi/aml-build.c | 111 ++++---- hw/arm/sbsa-ref.c | 16 ++ hw/arm/virt.c | 21 +- hw/core/machine-hmp-cmds.c | 4 + hw/core/machine.c | 16 ++ target/arm/cpu.c | 66 ++++- target/arm/cpu64.c | 353 ++++++++++++++----------- target/arm/cpu_tcg.c | 227 +++++++++++----- target/arm/helper.c | 600 +++++++++++++++++++++++++----------------- target/arm/op_helper.c | 43 +++ target/arm/translate-a64.c | 18 ++ target/arm/translate.c | 23 ++ tests/qtest/numa-test.c | 19 +- .mailmap | 3 +- MAINTAINERS | 2 +- 25 files changed, 1068 insertions(+), 562 deletions(-) From: Leif Lindholm <quic_llindhol@quicinc.com> NUVIA was acquired by Qualcomm in March 2021, but kept functioning on separate infrastructure for a transitional period. We've now switched over to contributing as Qualcomm Innovation Center (quicinc), so update my email address to reflect this. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20220505113740.75565-1-quic_llindhol@quicinc.com Cc: Leif Lindholm <leif@nuviainc.com> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [Fixed commit message typo] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- .mailmap | 3 ++- MAINTAINERS | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com> Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> -Leif Lindholm <leif@nuviainc.com> <leif.lindholm@linaro.org> +Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> +Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> Radoslaw Biernacki <rad@semihalf.com> <radoslaw.biernacki@linaro.org> Paul Burton <paulburton@kernel.org> <paul.burton@mips.com> Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com> diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <leif@nuviainc.com> +R: Leif Lindholm <quic_llindhol@quicinc.com> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/sbsa-ref.c -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> More gracefully handle cpregs when EL2 and/or EL3 are missing. If the reg is entirely inaccessible, do not register it at all. If the reg is for EL2, and EL3 is present but EL2 is not, either discard, squash to res0, const, or keep unchanged. Per rule RJFFP, mark the 4 aarch32 hypervisor access registers with ARM_CP_EL3_NO_EL2_KEEP, and mark all of the EL2 address translation and tlb invalidation "regs" ARM_CP_EL3_NO_EL2_UNDEF. Mark the 2 virtualization processor id regs ARM_CP_EL3_NO_EL2_C_NZ. This will simplify cpreg registration for conditional arm features. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 11 +++ target/arm/helper.c | 178 ++++++++++++++++++++++++++++++-------------- 2 files changed, 133 insertions(+), 56 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SVE = 1 << 14, /* Flag: Do not expose in gdb sysreg xml. */ ARM_CP_NO_GDB = 1 << 15, + /* + * Flags: If EL3 but not EL2... + * - UNDEF: discard the cpreg, + * - KEEP: retain the cpreg as is, + * - C_NZ: set const on the cpreg, but retain resetvalue, + * - else: set const on the cpreg, zero resetvalue, aka RES0. + * See rule RJFFP in section D1.1.3 of DDI0487H.a. + */ + ARM_CP_EL3_NO_EL2_UNDEF = 1 << 16, + ARM_CP_EL3_NO_EL2_KEEP = 1 << 17, + ARM_CP_EL3_NO_EL2_C_NZ = 1 << 18, }; /* diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .access = PL1_RW, .readfn = spsel_read, .writefn = spsel_write }, { .name = "FPEXC32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 3, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_ALIAS | ARM_CP_FPU, + .access = PL2_RW, + .type = ARM_CP_ALIAS | ARM_CP_FPU | ARM_CP_EL3_NO_EL2_KEEP, .fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]) }, { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0, - .access = PL2_RW, .resetvalue = 0, + .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, .writefn = dacr_write, .raw_writefn = raw_write, .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) }, { .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1, - .access = PL2_RW, .resetvalue = 0, + .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, .fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) }, { .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64, .type = ARM_CP_ALIAS, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .writefn = tlbimva_hyp_is_write }, { .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2_write }, { .name = "TLBI_VAE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2_write }, { .name = "TLBI_VALE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2_write }, { .name = "TLBI_ALLE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2is_write }, { .name = "TLBI_VAE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_VALE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, #ifndef CONFIG_USER_ONLY /* Unlike the other EL2-related AT operations, these must @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { { .name = "AT_S1E2R", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0, .access = PL2_W, .accessfn = at_s1e2_access, - .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, + .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, + .writefn = ats_write64 }, { .name = "AT_S1E2W", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1, .access = PL2_W, .accessfn = at_s1e2_access, - .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, + .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, + .writefn = ats_write64 }, /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3 * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { { .name = "DBGVCR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 2, .opc1 = 4, .crn = 0, .crm = 7, .opc2 = 0, .access = PL2_RW, .accessfn = access_tda, - .type = ARM_CP_NOP }, + .type = ARM_CP_NOP | ARM_CP_EL3_NO_EL2_KEEP }, /* Dummy MDCCINT_EL1, since we don't implement the Debug Communications * Channel but Linux may try to access this register. The 32-bit * alias is DBGDCCINT. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { .access = PL2_W, .type = ARM_CP_NOP }, { .name = "TLBI_RVAE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVALE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RIPAS2E1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { .access = PL2_W, .type = ARM_CP_NOP }, { .name = "TLBI_RVAE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVALE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVAE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2_write }, { .name = "TLBI_RVALE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2_write }, { .name = "TLBI_RVAE3IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 2, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ALLE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 0, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2is_write }, { .name = "TLBI_VAE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_ALLE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 4, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { .writefn = tlbi_aa64_alle1is_write }, { .name = "TLBI_VALE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_VMALLS12E1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 6, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "VPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = cpu->midr, .type = ARM_CP_ALIAS, + .resetvalue = cpu->midr, + .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetoflow32(CPUARMState, cp15.vpidr_el2) }, { .name = "VPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .resetvalue = cpu->midr, + .type = ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, { .name = "VMPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = vmpidr_def, .type = ARM_CP_ALIAS, + .resetvalue = vmpidr_def, + .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetoflow32(CPUARMState, cp15.vmpidr_el2) }, { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, - .access = PL2_RW, - .resetvalue = vmpidr_def, + .access = PL2_RW, .resetvalue = vmpidr_def, + .type = ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) }, }; define_arm_cp_regs(cpu, vpidr_regs); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, int crm, int opc1, int opc2, const char *name) { + CPUARMState *env = &cpu->env; uint32_t key; ARMCPRegInfo *r2; bool is64 = r->type & ARM_CP_64BIT; bool ns = secstate & ARM_CP_SECSTATE_NS; int cp = r->cp; - bool isbanked; size_t name_len; + bool make_const; switch (state) { case ARM_CP_STATE_AA32: @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, } } + /* + * Eliminate registers that are not present because the EL is missing. + * Doing this here makes it easier to put all registers for a given + * feature into the same ARMCPRegInfo array and define them all at once. + */ + make_const = false; + if (arm_feature(env, ARM_FEATURE_EL3)) { + /* + * An EL2 register without EL2 but with EL3 is (usually) RES0. + * See rule RJFFP in section D1.1.3 of DDI0487H.a. + */ + int min_el = ctz32(r->access) / 2; + if (min_el == 2 && !arm_feature(env, ARM_FEATURE_EL2)) { + if (r->type & ARM_CP_EL3_NO_EL2_UNDEF) { + return; + } + make_const = !(r->type & ARM_CP_EL3_NO_EL2_KEEP); + } + } else { + CPAccessRights max_el = (arm_feature(env, ARM_FEATURE_EL2) + ? PL2_RW : PL1_RW); + if ((r->access & max_el) == 0) { + return; + } + } + /* Combine cpreg and name into one allocation. */ name_len = strlen(name) + 1; r2 = g_malloc(sizeof(*r2) + name_len); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, r2->opaque = opaque; } - isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; - if (isbanked) { + if (make_const) { + /* This should not have been a very special register to begin. */ + int old_special = r2->type & ARM_CP_SPECIAL_MASK; + assert(old_special == 0 || old_special == ARM_CP_NOP); /* - * Register is banked (using both entries in array). - * Overwriting fieldoffset as the array is only used to define - * banked registers but later only fieldoffset is used. + * Set the special function to CONST, retaining the other flags. + * This is important for e.g. ARM_CP_SVE so that we still + * take the SVE trap if CPTR_EL3.EZ == 0. */ - r2->fieldoffset = r->bank_fieldoffsets[ns]; - } + r2->type = (r2->type & ~ARM_CP_SPECIAL_MASK) | ARM_CP_CONST; + /* + * Usually, these registers become RES0, but there are a few + * special cases like VPIDR_EL2 which have a constant non-zero + * value with writes ignored. + */ + if (!(r->type & ARM_CP_EL3_NO_EL2_C_NZ)) { + r2->resetvalue = 0; + } + /* + * ARM_CP_CONST has precedence, so removing the callbacks and + * offsets are not strictly necessary, but it is potentially + * less confusing to debug later. + */ + r2->readfn = NULL; + r2->writefn = NULL; + r2->raw_readfn = NULL; + r2->raw_writefn = NULL; + r2->resetfn = NULL; + r2->fieldoffset = 0; + r2->bank_fieldoffsets[0] = 0; + r2->bank_fieldoffsets[1] = 0; + } else { + bool isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; - if (state == ARM_CP_STATE_AA32) { if (isbanked) { /* - * If the register is banked then we don't need to migrate or - * reset the 32-bit instance in certain cases: - * - * 1) If the register has both 32-bit and 64-bit instances then we - * can count on the 64-bit instance taking care of the - * non-secure bank. - * 2) If ARMv8 is enabled then we can count on a 64-bit version - * taking care of the secure bank. This requires that separate - * 32 and 64-bit definitions are provided. + * Register is banked (using both entries in array). + * Overwriting fieldoffset as the array is only used to define + * banked registers but later only fieldoffset is used. */ - if ((r->state == ARM_CP_STATE_BOTH && ns) || - (arm_feature(&cpu->env, ARM_FEATURE_V8) && !ns)) { + r2->fieldoffset = r->bank_fieldoffsets[ns]; + } + if (state == ARM_CP_STATE_AA32) { + if (isbanked) { + /* + * If the register is banked then we don't need to migrate or + * reset the 32-bit instance in certain cases: + * + * 1) If the register has both 32-bit and 64-bit instances + * then we can count on the 64-bit instance taking care + * of the non-secure bank. + * 2) If ARMv8 is enabled then we can count on a 64-bit + * version taking care of the secure bank. This requires + * that separate 32 and 64-bit definitions are provided. + */ + if ((r->state == ARM_CP_STATE_BOTH && ns) || + (arm_feature(env, ARM_FEATURE_V8) && !ns)) { + r2->type |= ARM_CP_ALIAS; + } + } else if ((secstate != r->secure) && !ns) { + /* + * The register is not banked so we only want to allow + * migration of the non-secure instance. + */ r2->type |= ARM_CP_ALIAS; } - } else if ((secstate != r->secure) && !ns) { - /* - * The register is not banked so we only want to allow migration - * of the non-secure instance. - */ - r2->type |= ARM_CP_ALIAS; - } - if (HOST_BIG_ENDIAN && - r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { - r2->fieldoffset += sizeof(uint32_t); + if (HOST_BIG_ENDIAN && + r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { + r2->fieldoffset += sizeof(uint32_t); + } } } @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, * multiple times. Special registers (ie NOP/WFI) are * never migratable and not even raw-accessible. */ - if (r->type & ARM_CP_SPECIAL_MASK) { + if (r2->type & ARM_CP_SPECIAL_MASK) { r2->type |= ARM_CP_NO_RAW; } if (((r->crm == CP_ANY) && crm != 0) || -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Drop el3_no_el2_cp_reginfo, el3_no_el2_v8_cp_reginfo, and the local vpidr_regs definition, and rely on the squashing to ARM_CP_CONST while registering for v8. This is a behavior change for v7 cpus with Security Extensions and without Virtualization Extensions, in that the virtualization cpregs are now correctly not present. This would be a migration compatibility break, except that we have an existing bug in which migration of 32-bit cpus with Security Extensions enabled does not work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 158 ++++---------------------------------------- 1 file changed, 13 insertions(+), 145 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) }, }; -/* Used to describe the behaviour of EL2 regs when EL2 does not exist. */ -static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = { - { .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0, - .access = PL2_RW, - .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore }, - { .name = "HCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "HMAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "HAMAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "VTCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "VTTBR", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 6, .crm = 2, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1, - .access = PL2_RW, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HPFAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HIFAR", .state = ARM_CP_STATE_AA32, - .type = ARM_CP_CONST, - .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2, - .access = PL2_RW, .resetvalue = 0 }, -}; - -/* Ditto, but for registers which exist in ARMv8 but not v7 */ -static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { - { .name = "HCR2", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, -}; - static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, v8_idregs); define_arm_cp_regs(cpu, v8_cp_reginfo); } - if (arm_feature(env, ARM_FEATURE_EL2)) { + + /* + * Register the base EL2 cpregs. + * Pre v8, these registers are implemented only as part of the + * Virtualization Extensions (EL2 present). Beginning with v8, + * if EL2 is missing but EL3 is enabled, mostly these become + * RES0 from EL3, with some specific exceptions. + */ + if (arm_feature(env, ARM_FEATURE_EL2) + || (arm_feature(env, ARM_FEATURE_EL3) + && arm_feature(env, ARM_FEATURE_V8))) { uint64_t vmpidr_def = mpidr_read_val(env); ARMCPRegInfo vpidr_regs[] = { { .name = "VPIDR", .state = ARM_CP_STATE_AA32, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) }; define_one_arm_cp_reg(cpu, &rvbar); } - } else { - /* If EL2 is missing but higher ELs are enabled, we need to - * register the no_el2 reginfos. - */ - if (arm_feature(env, ARM_FEATURE_EL3)) { - /* When EL3 exists but not EL2, VPIDR and VMPIDR take the value - * of MIDR_EL1 and MPIDR_EL1. - */ - ARMCPRegInfo vpidr_regs[] = { - { .name = "VPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = cpu->midr, - .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, - { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_NO_RAW, - .writefn = arm_cp_write_ignore, .readfn = mpidr_read }, - }; - define_arm_cp_regs(cpu, vpidr_regs); - define_arm_cp_regs(cpu, el3_no_el2_cp_reginfo); - if (arm_feature(env, ARM_FEATURE_V8)) { - define_arm_cp_regs(cpu, el3_no_el2_v8_cp_reginfo); - } - } } + + /* Register the base EL3 cpregs. */ if (arm_feature(env, ARM_FEATURE_EL3)) { define_arm_cp_regs(cpu, el3_cp_reginfo); ARMCPRegInfo el3_regs[] = { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Drop zcr_no_el2_reginfo and merge the 3 registers into one array, now that ZCR_EL2 can be squashed to RES0 and ZCR_EL3 dropped while registering. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 55 ++++++++++++++------------------------------- 1 file changed, 17 insertions(+), 38 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, } } -static const ARMCPRegInfo zcr_el1_reginfo = { - .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), - .writefn = zcr_write, .raw_writefn = raw_write -}; - -static const ARMCPRegInfo zcr_el2_reginfo = { - .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), - .writefn = zcr_write, .raw_writefn = raw_write -}; - -static const ARMCPRegInfo zcr_no_el2_reginfo = { - .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE, - .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore -}; - -static const ARMCPRegInfo zcr_el3_reginfo = { - .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL3_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), - .writefn = zcr_write, .raw_writefn = raw_write +static const ARMCPRegInfo zcr_reginfo[] = { + { .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), + .writefn = zcr_write, .raw_writefn = raw_write }, + { .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL2_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), + .writefn = zcr_write, .raw_writefn = raw_write }, + { .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL3_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), + .writefn = zcr_write, .raw_writefn = raw_write }, }; void hw_watchpoint_update(ARMCPU *cpu, int n) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } if (cpu_isar_feature(aa64_sve, cpu)) { - define_one_arm_cp_reg(cpu, &zcr_el1_reginfo); - if (arm_feature(env, ARM_FEATURE_EL2)) { - define_one_arm_cp_reg(cpu, &zcr_el2_reginfo); - } else { - define_one_arm_cp_reg(cpu, &zcr_no_el2_reginfo); - } - if (arm_feature(env, ARM_FEATURE_EL3)) { - define_one_arm_cp_reg(cpu, &zcr_el3_reginfo); - } + define_arm_cp_regs(cpu, zcr_reginfo); } #ifdef TARGET_AARCH64 -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This register is present for either VHE or Debugv8p2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo jazelle_regs[] = { .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, }; +static const ARMCPRegInfo contextidr_el2 = { + .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, + .access = PL2_RW, + .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) +}; + static const ARMCPRegInfo vhe_reginfo[] = { - { .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL2_RW, - .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) }, { .name = "TTBR1_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1, .access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_one_arm_cp_reg(cpu, &ssbs_reginfo); } + if (cpu_isar_feature(aa64_vh, cpu) || + cpu_isar_feature(aa64_debugv8p2, cpu)) { + define_one_arm_cp_reg(cpu, &contextidr_el2); + } if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) { define_arm_cp_regs(cpu, vhe_reginfo); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we were defining some of these in user-only mode, but none of them are accessible from user-only, therefore define them only in system mode. This will shortly be used from cpu_tcg.c also. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++ target/arm/cpu64.c | 64 +++--------------------------------------- target/arm/cpu_tcg.c | 59 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+), 60 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int aarch64_fpu_gdb_get_reg(CPUARMState *env, GByteArray *buf, int reg); int aarch64_fpu_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg); #endif +#ifdef CONFIG_USER_ONLY +static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } +#else +void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); +#endif + #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "hvf_arm.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" -#include "cpregs.h" +#include "internals.h" -#ifndef CONFIG_USER_ONLY -static uint64_t a57_a53_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) -{ - ARMCPU *cpu = env_archcpu(env); - - /* Number of cores is in [25:24]; otherwise we RAZ */ - return (cpu->core_count - 1) << 24; -} -#endif - -static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { -#ifndef CONFIG_USER_ONLY - { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2, - .access = PL1_RW, .readfn = a57_a53_l2ctlr_read, - .writefn = arm_cp_write_ignore }, - { .name = "L2CTLR", - .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2, - .access = PL1_RW, .readfn = a57_a53_l2ctlr_read, - .writefn = arm_cp_write_ignore }, -#endif - { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2ECTLR", - .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUACTLR", - .cp = 15, .opc1 = 0, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUECTLR", - .cp = 15, .opc1 = 1, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUMERRSR", - .cp = 15, .opc1 = 2, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2MERRSR", - .cp = 15, .opc1 = 3, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, -}; - static void aarch64_a57_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_a57_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } static void aarch64_a53_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } static void aarch64_a72_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #endif #include "cpregs.h" +#ifndef CONFIG_USER_ONLY +static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu = env_archcpu(env); + + /* Number of cores is in [25:24]; otherwise we RAZ */ + return (cpu->core_count - 1) << 24; +} + +static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { + { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2, + .access = PL1_RW, .readfn = l2ctlr_read, + .writefn = arm_cp_write_ignore }, + { .name = "L2CTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2, + .access = PL1_RW, .readfn = l2ctlr_read, + .writefn = arm_cp_write_ignore }, + { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2ECTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUACTLR", + .cp = 15, .opc1 = 0, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUECTLR", + .cp = 15, .opc1 = 1, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUMERRSR", + .cp = 15, .opc1 = 2, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2MERRSR", + .cp = 15, .opc1 = 3, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, +}; + +void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) +{ + define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); +} +#endif /* !CONFIG_USER_ONLY */ + /* CPU models. These are not needed for the AArch64 linux-user build. */ #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Instead of starting with cortex-a15 and adding v8 features to a v7 cpu, begin with a v8 cpu stripped of its aarch64 features. This fixes the long-standing to-do where we only enabled v8 features for user-only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 151 ++++++++++++++++++++++++++----------------- 1 file changed, 92 insertions(+), 59 deletions(-) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data) static void arm_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); + uint32_t t; - cortex_a15_initfn(obj); + /* aarch64_a57_initfn, advertising none of the aarch64 features */ + cpu->dtb_compatible = "arm,cortex-a57"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + cpu->midr = 0x411fd070; + cpu->revidr = 0x00000000; + cpu->reset_fpsid = 0x41034070; + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x12111111; + cpu->isar.mvfr2 = 0x00000043; + cpu->ctr = 0x8444c004; + cpu->reset_sctlr = 0x00c50838; + cpu->isar.id_pfr0 = 0x00000131; + cpu->isar.id_pfr1 = 0x00011011; + cpu->isar.id_dfr0 = 0x03010066; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x10101105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02102211; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00011142; + cpu->isar.id_isar5 = 0x00011121; + cpu->isar.id_isar6 = 0; + cpu->isar.dbgdidr = 0x3516d000; + cpu->clidr = 0x0a200023; + cpu->ccsidr[0] = 0x701fe00a; /* 32KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe012; /* 48KB L1 icache */ + cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */ + define_cortex_a72_a57_a53_cp_reginfo(cpu); - /* old-style VFP short-vector support */ - cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); + /* Add additional features supported by QEMU */ + t = cpu->isar.id_isar5; + t = FIELD_DP32(t, ID_ISAR5, AES, 2); + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + cpu->isar.id_isar5 = t; + + t = cpu->isar.id_isar6; + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); + t = FIELD_DP32(t, ID_ISAR6, DP, 1); + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); + t = FIELD_DP32(t, ID_ISAR6, SB, 1); + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + cpu->isar.id_isar6 = t; + + t = cpu->isar.mvfr1; + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + cpu->isar.mvfr1 = t; + + t = cpu->isar.mvfr2; + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + cpu->isar.mvfr2 = t; + + t = cpu->isar.id_mmfr3; + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + cpu->isar.id_mmfr3 = t; + + t = cpu->isar.id_mmfr4; + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + cpu->isar.id_mmfr4 = t; + + t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, DIT, 1); + cpu->isar.id_pfr0 = t; + + t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + cpu->isar.id_pfr2 = t; #ifdef CONFIG_USER_ONLY /* - * We don't set these in system emulation mode for the moment, - * since we don't correctly set (all of) the ID registers to - * advertise them. + * Break with true ARMv8 and add back old-style VFP short-vector support. + * Only do this for user-mode, where -cpu max is the default, so that + * older v6 and v7 programs are more likely to work without adjustment. */ - set_feature(&cpu->env, ARM_FEATURE_V8); - { - uint32_t t; - - t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); - t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = t; - - t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = t; - - t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = t; - - t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ - cpu->isar.mvfr2 = t; - - t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = t; - - t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = t; - - t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = t; - - t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = t; - } -#endif /* CONFIG_USER_ONLY */ + cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); +#endif } #endif /* !TARGET_AARCH64 */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We set this for qemu-system-aarch64, but failed to do so for the strictly 32-bit emulation. Fixes: 3bec78447a9 ("target/arm: Provide ARMv8.4-PMU in '-cpu max'") Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) t = FIELD_DP32(t, ID_PFR2, SSBS, 1); cpu->isar.id_pfr2 = t; + t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + cpu->isar.id_dfr0 = t; + #ifdef CONFIG_USER_ONLY /* * Break with true ARMv8 and add back old-style VFP short-vector support. -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Share the code to set AArch32 max features so that we no longer have code drift between qemu{-system,}-{arm,aarch64}. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 + target/arm/cpu64.c | 50 +----------------- target/arm/cpu_tcg.c | 114 ++++++++++++++++++++++------------------- 3 files changed, 65 insertions(+), 101 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +void aa32_max_features(ARMCPU *cpu); + #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); uint64_t t; - uint32_t u; if (kvm_enabled() || hvf_enabled()) { /* With KVM or HVF, '-cpu max' is identical to '-cpu host' */ @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); cpu->isar.id_aa64zfr0 = t; - /* Replicate the same data to the 32-bit id registers. */ - u = cpu->isar.id_isar5; - u = FIELD_DP32(u, ID_ISAR5, AES, 2); /* AES + PMULL */ - u = FIELD_DP32(u, ID_ISAR5, SHA1, 1); - u = FIELD_DP32(u, ID_ISAR5, SHA2, 1); - u = FIELD_DP32(u, ID_ISAR5, CRC32, 1); - u = FIELD_DP32(u, ID_ISAR5, RDM, 1); - u = FIELD_DP32(u, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = u; - - u = cpu->isar.id_isar6; - u = FIELD_DP32(u, ID_ISAR6, JSCVT, 1); - u = FIELD_DP32(u, ID_ISAR6, DP, 1); - u = FIELD_DP32(u, ID_ISAR6, FHM, 1); - u = FIELD_DP32(u, ID_ISAR6, SB, 1); - u = FIELD_DP32(u, ID_ISAR6, SPECRES, 1); - u = FIELD_DP32(u, ID_ISAR6, BF16, 1); - u = FIELD_DP32(u, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = u; - - u = cpu->isar.id_pfr0; - u = FIELD_DP32(u, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = u; - - u = cpu->isar.id_pfr2; - u = FIELD_DP32(u, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = u; - - u = cpu->isar.id_mmfr3; - u = FIELD_DP32(u, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = u; - - u = cpu->isar.id_mmfr4; - u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */ - u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - u = FIELD_DP32(u, ID_MMFR4, CNP, 1); /* TTCNP */ - u = FIELD_DP32(u, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = u; - t = cpu->isar.id_aa64dfr0; t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */ cpu->isar.id_aa64dfr0 = t; - u = cpu->isar.id_dfr0; - u = FIELD_DP32(u, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ - cpu->isar.id_dfr0 = u; - - u = cpu->isar.mvfr1; - u = FIELD_DP32(u, MVFR1, FPHP, 3); /* v8.2-FP16 */ - u = FIELD_DP32(u, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = u; + /* Replicate the same data to the 32-bit id registers. */ + aa32_max_features(cpu); #ifdef CONFIG_USER_ONLY /* diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #endif #include "cpregs.h" + +/* Share AArch32 -cpu max features with AArch64. */ +void aa32_max_features(ARMCPU *cpu) +{ + uint32_t t; + + /* Add additional features supported by QEMU */ + t = cpu->isar.id_isar5; + t = FIELD_DP32(t, ID_ISAR5, AES, 2); + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + cpu->isar.id_isar5 = t; + + t = cpu->isar.id_isar6; + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); + t = FIELD_DP32(t, ID_ISAR6, DP, 1); + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); + t = FIELD_DP32(t, ID_ISAR6, SB, 1); + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + cpu->isar.id_isar6 = t; + + t = cpu->isar.mvfr1; + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + cpu->isar.mvfr1 = t; + + t = cpu->isar.mvfr2; + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + cpu->isar.mvfr2 = t; + + t = cpu->isar.id_mmfr3; + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + cpu->isar.id_mmfr3 = t; + + t = cpu->isar.id_mmfr4; + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + cpu->isar.id_mmfr4 = t; + + t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, DIT, 1); + cpu->isar.id_pfr0 = t; + + t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + cpu->isar.id_pfr2 = t; + + t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + cpu->isar.id_dfr0 = t; +} + #ifndef CONFIG_USER_ONLY static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) { @@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data) static void arm_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - uint32_t t; /* aarch64_a57_initfn, advertising none of the aarch64 features */ cpu->dtb_compatible = "arm,cortex-a57"; @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */ define_cortex_a72_a57_a53_cp_reginfo(cpu); - /* Add additional features supported by QEMU */ - t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); - t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = t; - - t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = t; - - t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = t; - - t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ - cpu->isar.mvfr2 = t; - - t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = t; - - t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = t; - - t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = t; - - t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = t; - - t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ - cpu->isar.id_dfr0 = t; + aa32_max_features(cpu); #ifdef CONFIG_USER_ONLY /* -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Update the legacy feature names to the current names. Provide feature names for id changes that were not marked. Sort the field updates into increasing bitfield order. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 100 +++++++++++++++++++++---------------------- target/arm/cpu_tcg.c | 48 ++++++++++----------- 2 files changed, 74 insertions(+), 74 deletions(-) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->midr = t; t = cpu->isar.id_aa64isar0; - t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* AES + PMULL */ - t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* SHA512 */ + t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); - t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2); /* v8.5-CondM */ - t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2); /* FEAT_TLBIRANGE */ - t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ + t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1); /* FEAT_SM3 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1); /* FEAT_SM4 */ + t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1); /* FEAT_DotProd */ + t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1); /* FEAT_FHM */ + t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2); /* FEAT_FlagM2 */ + t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2); /* FEAT_TLBIRANGE */ + t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1); /* FEAT_RNG */ cpu->isar.id_aa64isar0 = t; t = cpu->isar.id_aa64isar1; - t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); - t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* ARMv8.4-RCPC */ - t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); + t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); /* FEAT_DPB2 */ + t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); /* FEAT_JSCVT */ + t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); /* FEAT_FCMA */ + t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* FEAT_LRCPC2 */ + t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); /* FEAT_FRINTTS */ + t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); /* FEAT_SB */ + t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); /* FEAT_SPECRES */ + t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); /* FEAT_I8MM */ cpu->isar.id_aa64isar1 = t; t = cpu->isar.id_aa64pfr0; + t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); /* FEAT_FP16 */ + t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); /* FEAT_FP16 */ t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); - t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); - t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); - t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); - t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); + t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ + t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; - t = FIELD_DP64(t, ID_AA64PFR1, BT, 1); - t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2); + t = FIELD_DP64(t, ID_AA64PFR1, BT, 1); /* FEAT_BTI */ + t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2); /* FEAT_SSBS2 */ /* * Begin with full support for MTE. This will be downgraded to MTE=0 * during realize if the board provides no tag memory, much like * we do for EL2 with the virtualization=on property. */ - t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); + t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64mmfr0 = t; t = cpu->isar.id_aa64mmfr1; - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* HPD */ - t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); - t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); - t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2); /* ATS1E1 */ - t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* VMID16 */ - t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* TTS2UXN */ + t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ + t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ + t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2); /* FEAT_PAN2 */ + t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ cpu->isar.id_aa64mmfr1 = t; t = cpu->isar.id_aa64mmfr2; - t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); - t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */ - t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* TTST */ - t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ - t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ - t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2); /* FEAT_BBM at level 2 */ + t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* FEAT_TTCNP */ + t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); /* FEAT_UAO */ + t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ + t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* FEAT_TTST */ + t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ + t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2); /* FEAT_BBM at level 2 */ cpu->isar.id_aa64mmfr2 = t; t = cpu->isar.id_aa64zfr0; t = FIELD_DP64(t, ID_AA64ZFR0, SVEVER, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2); /* PMULL */ - t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); + t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2); /* FEAT_SVE_PMULL128 */ + t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1); /* FEAT_SVE_BitPerm */ + t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1); /* FEAT_SVE_SHA3 */ + t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1); /* FEAT_SVE_SM4 */ + t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1); /* FEAT_I8MM */ + t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1); /* FEAT_F32MM */ + t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); /* FEAT_F64MM */ cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; - t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */ + t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; /* Replicate the same data to the 32-bit id registers. */ diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) /* Add additional features supported by QEMU */ t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, AES, 2); /* FEAT_PMULL */ + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); /* FEAT_SHA1 */ + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); /* FEAT_SHA256 */ t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); /* FEAT_RDM */ + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); /* FEAT_FCMA */ cpu->isar.id_isar5 = t; t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); /* FEAT_JSCVT */ + t = FIELD_DP32(t, ID_ISAR6, DP, 1); /* Feat_DotProd */ + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); /* FEAT_FHM */ + t = FIELD_DP32(t, ID_ISAR6, SB, 1); /* FEAT_SB */ + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); /* FEAT_SPECRES */ + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); /* FEAT_AA32BF16 */ + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); /* FEAT_AA32I8MM */ cpu->isar.id_isar6 = t; t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* FEAT_FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* FEAT_FP16 */ cpu->isar.mvfr1 = t; t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ cpu->isar.mvfr2 = t; t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* FEAT_PAN2 */ cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX*/ cpu->isar.id_mmfr4 = t; t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); + t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); /* FEAT_SSBS */ cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Use FIELD_DP{32,64} to manipulate id_pfr1 and id_aa64pfr0 during arm_cpu_realizefn. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) */ unset_feature(env, ARM_FEATURE_EL3); - /* Disable the security extension feature bits in the processor feature - * registers as well. These are id_pfr1[7:4] and id_aa64pfr0[15:12]. + /* + * Disable the security extension feature bits in the processor + * feature registers as well. */ - cpu->isar.id_pfr1 &= ~0xf0; - cpu->isar.id_aa64pfr0 &= ~0xf000; + cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, ID_PFR1, SECURITY, 0); + cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, + ID_AA64PFR0, EL3, 0); } if (!cpu->has_el2) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!arm_feature(env, ARM_FEATURE_EL2)) { - /* Disable the hypervisor feature bits in the processor feature - * registers if we don't have EL2. These are id_pfr1[15:12] and - * id_aa64pfr0_el1[11:8]. + /* + * Disable the hypervisor feature bits in the processor feature + * registers if we don't have EL2. */ - cpu->isar.id_aa64pfr0 &= ~0xf00; - cpu->isar.id_pfr1 &= ~0xf000; + cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, + ID_AA64PFR0, EL2, 0); + cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, + ID_PFR1, VIRTUALIZATION, 0); } #ifndef CONFIG_USER_ONLY -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The only portion of FEAT_Debugv8p2 that is relevant to QEMU is CONTEXTIDR_EL2, which is also conditionally implemented with FEAT_VHE. The rest of the debug extension concerns the External debug interface, which is outside the scope of QEMU. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BTI (Branch Target Identification) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) +- FEAT_Debugv8p2 (Debug changes for v8.2) - FEAT_DotProd (Advanced SIMD dot product instructions) - FEAT_FCMA (Floating-point complex number instructions) - FEAT_FHM (Floating-point half-precision multiplication instructions) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) * feature registers as well. */ cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, ID_PFR1, SECURITY, 0); + cpu->isar.id_dfr0 = FIELD_DP32(cpu->isar.id_dfr0, ID_DFR0, COPSDBG, 0); cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, ID_AA64PFR0, EL3, 0); } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; + t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 8); /* FEAT_Debugv8p2 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, COPDBG, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP32(t, ID_DFR0, COPSDBG, 8); /* FEAT_Debugv8p2 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns changes to the External Debug interface, with Secure and Non-secure access to the debug registers, and all of it is outside the scope of QEMU. Indicating support for this is mandatory with FEAT_SEL2, which we do implement. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 2 +- target/arm/cpu_tcg.c | 4 ++-- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) +- FEAT_Debugv8p4 (Debug changes for v8.4) - FEAT_DotProd (Advanced SIMD dot product instructions) - FEAT_FCMA (Floating-point complex number instructions) - FEAT_FHM (Floating-point half-precision multiplication instructions) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; - t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, COPDBG, 8); /* FEAT_Debugv8p2 */ - t = FIELD_DP32(t, ID_DFR0, COPSDBG, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP32(t, ID_DFR0, COPDBG, 9); /* FEAT_Debugv8p4 */ + t = FIELD_DP32(t, ID_DFR0, COPSDBG, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Add only the system registers required to implement zero error records. This means that all values for ERRSELR are out of range, which means that it and all of the indexed error record registers need not be implemented. Add the EL2 registers required for injecting virtual SError. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 5 +++ target/arm/helper.c | 84 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 89 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint64_t tfsr_el[4]; /* tfsre0_el1 is index 0. */ uint64_t gcr_el1; uint64_t rgsr_el1; + + /* Minimal RAS registers */ + uint64_t disr_el1; + uint64_t vdisr_el2; + uint64_t vsesr_el2; } cp15; struct { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 }, }; +/* + * Check for traps to RAS registers, which are controlled + * by HCR_EL2.TERR and SCR_EL3.TERR. + */ +static CPAccessResult access_terr(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TERR)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_TERR)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static uint64_t disr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { + return env->cp15.vdisr_el2; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { + return 0; /* RAZ/WI */ + } + return env->cp15.disr_el1; +} + +static void disr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { + env->cp15.vdisr_el2 = val; + return; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { + return; /* RAZ/WI */ + } + env->cp15.disr_el1 = val; +} + +/* + * Minimal RAS implementation with no Error Records. + * Which means that all of the Error Record registers: + * ERXADDR_EL1 + * ERXCTLR_EL1 + * ERXFR_EL1 + * ERXMISC0_EL1 + * ERXMISC1_EL1 + * ERXMISC2_EL1 + * ERXMISC3_EL1 + * ERXPFGCDN_EL1 (RASv1p1) + * ERXPFGCTL_EL1 (RASv1p1) + * ERXPFGF_EL1 (RASv1p1) + * ERXSTATUS_EL1 + * and + * ERRSELR_EL1 + * may generate UNDEFINED, which is the effect we get by not + * listing them at all. + */ +static const ARMCPRegInfo minimal_ras_reginfo[] = { + { .name = "DISR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 1, + .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.disr_el1), + .readfn = disr_read, .writefn = disr_write, .raw_writefn = raw_write }, + { .name = "ERRIDR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 3, .opc2 = 0, + .access = PL1_R, .accessfn = access_terr, + .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "VDISR_EL2", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 1, .opc2 = 1, + .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vdisr_el2) }, + { .name = "VSESR_EL2", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 3, + .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vsesr_el2) }, +}; + /* Return the exception level to which exceptions should be taken * via SVEAccessTrap. If an exception should be routed through * AArch64.AdvSIMDFPAccessTrap, return 0; fp_exception_el should @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_ssbs, cpu)) { define_one_arm_cp_reg(cpu, &ssbs_reginfo); } + if (cpu_isar_feature(any_ras, cpu)) { + define_arm_cp_regs(cpu, minimal_ras_reginfo); + } if (cpu_isar_feature(aa64_vh, cpu) || cpu_isar_feature(aa64_debugv8p2, cpu)) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable writes to the TERR and TEA bits when RAS is enabled. These bits are otherwise RES0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) } valid_mask &= ~SCR_NET; + if (cpu_isar_feature(aa64_ras, cpu)) { + valid_mask |= SCR_TERR; + } if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= SCR_TLOR; } @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) } } else { valid_mask &= ~(SCR_RW | SCR_ST); + if (cpu_isar_feature(aa32_ras, cpu)) { + valid_mask |= SCR_TERR; + } } if (!arm_feature(env, ARM_FEATURE_EL2)) { @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (cpu_isar_feature(aa64_vh, cpu)) { valid_mask |= HCR_E2H; } + if (cpu_isar_feature(aa64_ras, cpu)) { + valid_mask |= HCR_TERR | HCR_TEA; + } if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= HCR_TLOR; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Virtual SError exceptions are raised by setting HCR_EL2.VSE, and are routed to EL1 just like other virtual exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 8 ++++++++ target/arm/syndrome.h | 5 +++++ target/arm/cpu.c | 38 +++++++++++++++++++++++++++++++++++++- target/arm/helper.c | 40 +++++++++++++++++++++++++++++++++++++++- 5 files changed, 91 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_LSERR 21 /* v8M LSERR SecureFault */ #define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ #define EXCP_DIVBYZERO 23 /* v7M DIVBYZERO UsageFault */ +#define EXCP_VSERR 24 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ enum { #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 +#define CPU_INTERRUPT_VSERR CPU_INTERRUPT_TGT_INT_0 /* The usual mapping for an AArch64 system register to its AArch32 * counterpart is for the 32 bit world to have access to the lower diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_cpu_update_vserr: Update CPU_INTERRUPT_VSERR bit + * + * Update the CPU_INTERRUPT_VSERR bit in cs->interrupt_request, + * following a change to the HCR_EL2.VSE bit. + */ +void arm_cpu_update_vserr(ARMCPU *cpu); + /** * arm_mmu_idx_el: * @env: The cpu environment diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_serror(uint32_t extra) +{ + return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs) return (cpu->power_state != PSCI_OFF) && cs->interrupt_request & (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD - | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ + | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ | CPU_INTERRUPT_VSERR | CPU_INTERRUPT_EXITTB); } @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, return false; } return !(env->daif & PSTATE_I); + case EXCP_VSERR: + if (!(hcr_el2 & HCR_AMO) || (hcr_el2 & HCR_TGE)) { + /* VIRQs are only taken when hypervized. */ + return false; + } + return !(env->daif & PSTATE_A); default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) goto found; } } + if (interrupt_request & CPU_INTERRUPT_VSERR) { + excp_idx = EXCP_VSERR; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + /* Taking a virtual abort clears HCR_EL2.VSE */ + env->cp15.hcr_el2 &= ~HCR_VSE; + cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR); + goto found; + } + } return false; found: @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) } } +void arm_cpu_update_vserr(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VSERR, which is the HCR_EL2.VSE bit. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = env->cp15.hcr_el2 & HCR_VSE; + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VSERR) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VSERR); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR); + } + } +} + #ifndef CONFIG_USER_ONLY static void arm_cpu_set_irq(void *opaque, int irq, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) } } - /* External aborts are not possible in QEMU so A bit is always clear */ + if (hcr_el2 & HCR_AMO) { + if (cs->interrupt_request & CPU_INTERRUPT_VSERR) { + ret |= CPSR_A; + } + } + return ret; } @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) g_assert(qemu_mutex_iothread_locked()); arm_cpu_update_virq(cpu); arm_cpu_update_vfiq(cpu); + arm_cpu_update_vserr(cpu); } static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs) [EXCP_LSERR] = "v8M LSERR UsageFault", [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault", + [EXCP_VSERR] = "Virtual SERR", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) mask = CPSR_A | CPSR_I | CPSR_F; offset = 4; break; + case EXCP_VSERR: + { + /* + * Note that this is reported as a data abort, but the DFAR + * has an UNKNOWN value. Construct the SError syndrome from + * AET and ExT fields. + */ + ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal, }; + + if (extended_addresses_enabled(env)) { + env->exception.fsr = arm_fi_to_lfsc(&fi); + } else { + env->exception.fsr = arm_fi_to_sfsc(&fi); + } + env->exception.fsr |= env->cp15.vsesr_el2 & 0xd000; + A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr); + qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x\n", + env->exception.fsr); + + new_mode = ARM_CPU_MODE_ABT; + addr = 0x10; + mask = CPSR_A | CPSR_I; + offset = 8; + } + break; case EXCP_SMC: new_mode = ARM_CPU_MODE_MON; addr = 0x08; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) case EXCP_VFIQ: addr += 0x100; break; + case EXCP_VSERR: + addr += 0x180; + /* Construct the SError syndrome from IDS and ISS fields. */ + env->exception.syndrome = syn_serror(env->cp15.vsesr_el2 & 0x1ffffff); + env->cp15.esr_el[new_el] = env->exception.syndrome; + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Check for and defer any pending virtual SError. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/a32.decode | 16 ++++++++------ target/arm/t32.decode | 18 ++++++++-------- target/arm/op_helper.c | 43 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 17 +++++++++++++++ target/arm/translate.c | 23 ++++++++++++++++++++ 6 files changed, 103 insertions(+), 15 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_1(wfe, void, env) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) +DEF_HELPER_1(vesb, void, env) DEF_HELPER_3(cpsr_write, void, env, i32, i32) DEF_HELPER_2(cpsr_write_eret, void, env, i32) diff --git a/target/arm/a32.decode b/target/arm/a32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/a32.decode +++ b/target/arm/a32.decode @@ -XXX,XX +XXX,XX @@ SMULTT .... 0001 0110 .... 0000 .... 1110 .... @rd0mn { { - YIELD ---- 0011 0010 0000 1111 ---- 0000 0001 - WFE ---- 0011 0010 0000 1111 ---- 0000 0010 - WFI ---- 0011 0010 0000 1111 ---- 0000 0011 + [ + YIELD ---- 0011 0010 0000 1111 ---- 0000 0001 + WFE ---- 0011 0010 0000 1111 ---- 0000 0010 + WFI ---- 0011 0010 0000 1111 ---- 0000 0011 - # TODO: Implement SEV, SEVL; may help SMP performance. - # SEV ---- 0011 0010 0000 1111 ---- 0000 0100 - # SEVL ---- 0011 0010 0000 1111 ---- 0000 0101 + # TODO: Implement SEV, SEVL; may help SMP performance. + # SEV ---- 0011 0010 0000 1111 ---- 0000 0100 + # SEVL ---- 0011 0010 0000 1111 ---- 0000 0101 + + ESB ---- 0011 0010 0000 1111 ---- 0001 0000 + ] # The canonical nop ends in 00000000, but the whole of the # rest of the space executes as nop if otherwise unsupported. diff --git a/target/arm/t32.decode b/target/arm/t32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/t32.decode +++ b/target/arm/t32.decode @@ -XXX,XX +XXX,XX @@ CLZ 1111 1010 1011 ---- 1111 .... 1000 .... @rdm [ # Hints, and CPS { - YIELD 1111 0011 1010 1111 1000 0000 0000 0001 - WFE 1111 0011 1010 1111 1000 0000 0000 0010 - WFI 1111 0011 1010 1111 1000 0000 0000 0011 + [ + YIELD 1111 0011 1010 1111 1000 0000 0000 0001 + WFE 1111 0011 1010 1111 1000 0000 0000 0010 + WFI 1111 0011 1010 1111 1000 0000 0000 0011 - # TODO: Implement SEV, SEVL; may help SMP performance. - # SEV 1111 0011 1010 1111 1000 0000 0000 0100 - # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 + # TODO: Implement SEV, SEVL; may help SMP performance. + # SEV 1111 0011 1010 1111 1000 0000 0000 0100 + # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 - # For M-profile minimal-RAS ESB can be a NOP, which is the - # default behaviour since it is in the hint space. - # ESB 1111 0011 1010 1111 1000 0000 0001 0000 + ESB 1111 0011 1010 1111 1000 0000 0001 0000 + ] # The canonical nop ends in 0000 0000, but the whole rest # of the space is "reserved hint, behaves as nop". diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(probe_access)(CPUARMState *env, target_ulong ptr, access_type, mmu_idx, ra); } } + +/* + * This function corresponds to AArch64.vESBOperation(). + * Note that the AArch32 version is not functionally different. + */ +void HELPER(vesb)(CPUARMState *env) +{ + /* + * The EL2Enabled() check is done inside arm_hcr_el2_eff, + * and will return HCR_EL2.VSE == 0, so nothing happens. + */ + uint64_t hcr = arm_hcr_el2_eff(env); + bool enabled = !(hcr & HCR_TGE) && (hcr & HCR_AMO); + bool pending = enabled && (hcr & HCR_VSE); + bool masked = (env->daif & PSTATE_A); + + /* If VSE pending and masked, defer the exception. */ + if (pending && masked) { + uint32_t syndrome; + + if (arm_el_is_aa64(env, 1)) { + /* Copy across IDS and ISS from VSESR. */ + syndrome = env->cp15.vsesr_el2 & 0x1ffffff; + } else { + ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal }; + + if (extended_addresses_enabled(env)) { + syndrome = arm_fi_to_lfsc(&fi); + } else { + syndrome = arm_fi_to_sfsc(&fi); + } + /* Copy across AET and ExT from VSESR. */ + syndrome |= env->cp15.vsesr_el2 & 0xd000; + } + + /* Set VDISR_EL2.A along with the syndrome. */ + env->cp15.vdisr_el2 = syndrome | (1u << 31); + + /* Clear pending virtual SError */ + env->cp15.hcr_el2 &= ~HCR_VSE; + cpu_reset_interrupt(env_cpu(env), CPU_INTERRUPT_VSERR); + } +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn, gen_helper_autib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); } break; + case 0b10000: /* ESB */ + /* Without RAS, we must implement this as NOP. */ + if (dc_isar_feature(aa64_ras, s)) { + /* + * QEMU does not have a source of physical SErrors, + * so we are only concerned with virtual SErrors. + * The pseudocode in the ARM for this case is + * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then + * AArch64.vESBOperation(); + * Most of the condition can be evaluated at translation time. + * Test for EL2 present, and defer test for SEL2 to runtime. + */ + if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { + gen_helper_vesb(cpu_env); + } + } + break; case 0b11000: /* PACIAZ */ if (s->pauth_active) { gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFI(DisasContext *s, arg_WFI *a) return true; } +static bool trans_ESB(DisasContext *s, arg_ESB *a) +{ + /* + * For M-profile, minimal-RAS ESB can be a NOP. + * Without RAS, we must implement this as NOP. + */ + if (!arm_dc_feature(s, ARM_FEATURE_M) && dc_isar_feature(aa32_ras, s)) { + /* + * QEMU does not have a source of physical SErrors, + * so we are only concerned with virtual SErrors. + * The pseudocode in the ARM for this case is + * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then + * AArch32.vESBOperation(); + * Most of the condition can be evaluated at translation time. + * Test for EL2 present, and defer test for SEL2 to runtime. + */ + if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { + gen_helper_vesb(cpu_env); + } + } + return true; +} + static bool trans_NOP(DisasContext *s, arg_NOP *a) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_PMULL (PMULL, PMULL2 instructions) - FEAT_PMUv3p1 (PMU Extensions v3.1) - FEAT_PMUv3p4 (PMU Extensions v3.4) +- FEAT_RAS (Reliability, availability, and serviceability) - FEAT_RDM (Advanced SIMD rounding double multiply accumulate instructions) - FEAT_RNG (Random number generator) - FEAT_SB (Speculation Barrier) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64pfr0; t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); /* FEAT_FP16 */ t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); /* FEAT_FP16 */ + t = FIELD_DP64(t, ID_AA64PFR0, RAS, 1); /* FEAT_RAS */ t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) t = cpu->isar.id_pfr0; t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ + t = FIELD_DP32(t, ID_PFR0, RAS, 1); /* FEAT_RAS */ cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This feature is AArch64 only, and applies to physical SErrors, which QEMU does not implement, thus the feature is a nop. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_FlagM2 (Enhancements to flag manipulation instructions) - FEAT_HPDS (Hierarchical permission disables) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) +- FEAT_IESB (Implicit error synchronization event) - FEAT_JSCVT (JavaScript conversion instructions) - FEAT_LOR (Limited ordering regions) - FEAT_LPA (Large Physical Address space) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64mmfr2; t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); /* FEAT_UAO */ + t = FIELD_DP64(t, ID_AA64MMFR2, IESB, 1); /* FEAT_IESB */ t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* FEAT_TTST */ t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns branch speculation, which TCG does not implement. Thus we can trivially enable this feature. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CSV2 (Cache speculation variant 2) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 1); /* FEAT_CSV2 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr4 = t; t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, CSV2, 2); /* FEAT_CVS2 */ t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ t = FIELD_DP32(t, ID_PFR0, RAS, 1); /* FEAT_RAS */ cpu->isar.id_pfr0 = t; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> There is no branch prediction in TCG, therefore there is no need to actually include the context number into the predictor. Therefore all we need to do is add the state for SCXTNUM_ELx. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 3 ++ target/arm/cpu.h | 16 +++++++++ target/arm/cpu.c | 5 +++ target/arm/cpu64.c | 3 +- target/arm/helper.c | 61 ++++++++++++++++++++++++++++++++++- 5 files changed, 86 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) - FEAT_CSV2 (Cache speculation variant 2) +- FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) +- FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) +- FEAT_CSV2_2 (Cache speculation variant 2, version 2) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMPACKey apdb; ARMPACKey apga; } keys; + + uint64_t scxtnum_el[4]; #endif #if defined(CONFIG_USER_ONLY) @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define SCTLR_WXN (1U << 19) #define SCTLR_ST (1U << 20) /* up to ??, RAZ in v6 */ #define SCTLR_UWXN (1U << 20) /* v7 onward, AArch32 only */ +#define SCTLR_TSCXT (1U << 20) /* FEAT_CSV2_1p2, AArch64 only */ #define SCTLR_FI (1U << 21) /* up to v7, v8 RES0 */ #define SCTLR_IESB (1U << 21) /* v8.2-IESB, AArch64 only */ #define SCTLR_U (1U << 22) /* up to v6, RAO in v7 */ @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_dit(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, DIT) != 0; } +static inline bool isar_feature_aa64_scxtnum(const ARMISARegisters *id) +{ + int key = FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, CSV2); + if (key >= 2) { + return true; /* FEAT_CSV2_2 */ + } + if (key == 1) { + key = FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, CSV2_FRAC); + return key >= 2; /* FEAT_CSV2_1p2 */ + } + return false; +} + static inline bool isar_feature_aa64_ssbs(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SSBS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) */ env->cp15.gcr_el1 = 0x1ffff; } + /* + * Disable access to SCXTNUM_EL0 from CSV2_1p2. + * This is not yet exposed from the Linux kernel in any way. + */ + env->cp15.sctlr_el[1] |= SCTLR_TSCXT; #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ - t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 1); /* FEAT_CSV2 */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 2); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) * we do for EL2 with the virtualization=on property. */ t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ + t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_mte, cpu)) { valid_mask |= SCR_ATA; } + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + valid_mask |= SCR_ENSCXT; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (cpu_isar_feature(aa64_mte, cpu)) { valid_mask |= HCR_ATA | HCR_DCT | HCR_TID5; } + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + valid_mask |= HCR_ENSCXT; + } } /* Clear RES0 bits. */ @@ -XXX,XX +XXX,XX @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) { K(3, 0, 5, 6, 0), K(3, 4, 5, 6, 0), K(3, 5, 5, 6, 0), "TFSR_EL1", "TFSR_EL2", "TFSR_EL12", isar_feature_aa64_mte }, + { K(3, 0, 13, 0, 7), K(3, 4, 13, 0, 7), K(3, 5, 13, 0, 7), + "SCXTNUM_EL1", "SCXTNUM_EL2", "SCXTNUM_EL12", + isar_feature_aa64_scxtnum }, + /* TODO: ARMv8.2-SPE -- PMSCR_EL2 */ /* TODO: ARMv8.4-Trace -- TRFCR_EL2 */ }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { }, }; -#endif +static CPAccessResult access_scxtnum(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + uint64_t hcr = arm_hcr_el2_eff(env); + int el = arm_current_el(env); + + if (el == 0 && !((hcr & HCR_E2H) && (hcr & HCR_TGE))) { + if (env->cp15.sctlr_el[1] & SCTLR_TSCXT) { + if (hcr & HCR_TGE) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_TRAP; + } + } else if (el < 2 && (env->cp15.sctlr_el[2] & SCTLR_TSCXT)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 2 && arm_is_el2_enabled(env) && !(hcr & HCR_ENSCXT)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 + && arm_feature(env, ARM_FEATURE_EL3) + && !(env->cp15.scr_el3 & SCR_ENSCXT)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo scxtnum_reginfo[] = { + { .name = "SCXTNUM_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL0_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[0]) }, + { .name = "SCXTNUM_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL1_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[1]) }, + { .name = "SCXTNUM_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL2_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[2]) }, + { .name = "SCXTNUM_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL3_RW, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[3]) }, +}; +#endif /* TARGET_AARCH64 */ static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, mte_tco_ro_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } + + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + define_arm_cp_regs(cpu, scxtnum_reginfo); + } #endif if (cpu_isar_feature(any_predinv, cpu)) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns cache speculation, which TCG does not implement. Thus we can trivially enable this feature. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) - FEAT_CSV2_2 (Cache speculation variant 2, version 2) +- FEAT_CSV3 (Cache speculation variant 3) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 2); /* FEAT_CSV2_2 */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV3, 1); /* FEAT_CSV3 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, CSV3, 1); /* FEAT_CSV3 */ t = FIELD_DP32(t, ID_PFR2, SSBS, 1); /* FEAT_SSBS */ cpu->isar.id_pfr2 = t; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns not merging memory access, which TCG does not implement. Thus we can trivially enable this feature. Add a comment to handle_hint for the DGH instruction, but no code. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/translate-a64.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) - FEAT_CSV2_2 (Cache speculation variant 2, version 2) - FEAT_CSV3 (Cache speculation variant 3) +- FEAT_DGH (Data gathering hint) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); /* FEAT_SB */ t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); /* FEAT_SPECRES */ t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ISAR1, DGH, 1); /* FEAT_DGH */ t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); /* FEAT_I8MM */ cpu->isar.id_aa64isar1 = t; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn, break; case 0b00100: /* SEV */ case 0b00101: /* SEVL */ + case 0b00110: /* DGH */ /* we treat all as NOP at least for now */ break; case 0b00111: /* XPACLRI */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable the a76 for virt and sbsa board use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 1 + hw/arm/sbsa-ref.c | 1 + hw/arm/virt.c | 1 + target/arm/cpu64.c | 66 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ Supported guest CPU types: - ``cortex-a53`` (64-bit) - ``cortex-a57`` (64-bit) - ``cortex-a72`` (64-bit) +- ``cortex-a76`` (64-bit) - ``a64fx`` (64-bit) - ``host`` (with KVM only) - ``max`` (same as ``host`` for KVM; best possible emulation with TCG) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { static const char * const valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), + ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a53"), ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), + ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("a64fx"), ARM_CPU_TYPE_NAME("host"), ARM_CPU_TYPE_NAME("max"), diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +static void aarch64_a76_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + cpu->dtb_compatible = "arm,cortex-a76"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_AARCH64); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + + /* Ordered by B2.4 AArch64 registers by functional group */ + cpu->clidr = 0x82000023; + cpu->ctr = 0x8444C004; + cpu->dcz_blocksize = 4; + cpu->isar.id_aa64dfr0 = 0x0000000010305408ull; + cpu->isar.id_aa64isar0 = 0x0000100010211120ull; + cpu->isar.id_aa64isar1 = 0x0000000000100001ull; + cpu->isar.id_aa64mmfr0 = 0x0000000000101122ull; + cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull; + cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull; + cpu->isar.id_aa64pfr0 = 0x1100000010111112ull; /* GIC filled in later */ + cpu->isar.id_aa64pfr1 = 0x0000000000000010ull; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_dfr0 = 0x04010088; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x01011121; + cpu->isar.id_isar6 = 0x00000010; + cpu->isar.id_mmfr0 = 0x10201105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02122211; + cpu->isar.id_mmfr4 = 0x00021110; + cpu->isar.id_pfr0 = 0x10010131; + cpu->isar.id_pfr1 = 0x00010000; /* GIC filled in later */ + cpu->isar.id_pfr2 = 0x00000011; + cpu->midr = 0x414fd0b1; /* r4p1 */ + cpu->revidr = 0; + + /* From B2.18 CCSIDR_EL1 */ + cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */ + cpu->ccsidr[2] = 0x707fe03a; /* 512KB L2 cache */ + + /* From B2.93 SCTLR_EL3 */ + cpu->reset_sctlr = 0x30c50838; + + /* From B4.23 ICH_VTR_EL2 */ + cpu->gic_num_lrs = 4; + cpu->gic_vpribits = 5; + cpu->gic_vprebits = 5; + + /* From B5.1 AdvSIMD AArch64 register summary */ + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x13211111; + cpu->isar.mvfr2 = 0x00000043; +} + void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { /* @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a57", .initfn = aarch64_a57_initfn }, { .name = "cortex-a53", .initfn = aarch64_a53_initfn }, { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, + { .name = "cortex-a76", .initfn = aarch64_a76_initfn }, { .name = "a64fx", .initfn = aarch64_a64fx_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, #if defined(CONFIG_KVM) || defined(CONFIG_HVF) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable the n1 for virt and sbsa board use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 1 + hw/arm/sbsa-ref.c | 1 + hw/arm/virt.c | 1 + target/arm/cpu64.c | 66 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ Supported guest CPU types: - ``cortex-a76`` (64-bit) - ``a64fx`` (64-bit) - ``host`` (with KVM only) +- ``neoverse-n1`` (64-bit) - ``max`` (same as ``host`` for KVM; best possible emulation with TCG) Note that the default is ``cortex-a15``, so for an AArch64 guest you must diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const char * const valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), ARM_CPU_TYPE_NAME("cortex-a76"), + ARM_CPU_TYPE_NAME("neoverse-n1"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a72"), ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("a64fx"), + ARM_CPU_TYPE_NAME("neoverse-n1"), ARM_CPU_TYPE_NAME("host"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a76_initfn(Object *obj) cpu->isar.mvfr2 = 0x00000043; } +static void aarch64_neoverse_n1_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + cpu->dtb_compatible = "arm,neoverse-n1"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_AARCH64); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + + /* Ordered by B2.4 AArch64 registers by functional group */ + cpu->clidr = 0x82000023; + cpu->ctr = 0x8444c004; + cpu->dcz_blocksize = 4; + cpu->isar.id_aa64dfr0 = 0x0000000110305408ull; + cpu->isar.id_aa64isar0 = 0x0000100010211120ull; + cpu->isar.id_aa64isar1 = 0x0000000000100001ull; + cpu->isar.id_aa64mmfr0 = 0x0000000000101125ull; + cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull; + cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull; + cpu->isar.id_aa64pfr0 = 0x1100000010111112ull; /* GIC filled in later */ + cpu->isar.id_aa64pfr1 = 0x0000000000000020ull; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_dfr0 = 0x04010088; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x01011121; + cpu->isar.id_isar6 = 0x00000010; + cpu->isar.id_mmfr0 = 0x10201105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02122211; + cpu->isar.id_mmfr4 = 0x00021110; + cpu->isar.id_pfr0 = 0x10010131; + cpu->isar.id_pfr1 = 0x00010000; /* GIC filled in later */ + cpu->isar.id_pfr2 = 0x00000011; + cpu->midr = 0x414fd0c1; /* r4p1 */ + cpu->revidr = 0; + + /* From B2.23 CCSIDR_EL1 */ + cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */ + cpu->ccsidr[2] = 0x70ffe03a; /* 1MB L2 cache */ + + /* From B2.98 SCTLR_EL3 */ + cpu->reset_sctlr = 0x30c50838; + + /* From B4.23 ICH_VTR_EL2 */ + cpu->gic_num_lrs = 4; + cpu->gic_vpribits = 5; + cpu->gic_vprebits = 5; + + /* From B5.1 AdvSIMD AArch64 register summary */ + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x13211111; + cpu->isar.mvfr2 = 0x00000043; +} + void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { /* @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, { .name = "cortex-a76", .initfn = aarch64_a76_initfn }, { .name = "a64fx", .initfn = aarch64_a64fx_initfn }, + { .name = "neoverse-n1", .initfn = aarch64_neoverse_n1_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, #if defined(CONFIG_KVM) || defined(CONFIG_HVF) { .name = "host", .initfn = aarch64_host_initfn }, -- 2.25.1 From: Leif Lindholm <quic_llindhol@quicinc.com> The sbsa-ref machine is continuously evolving. Some of the changes we want to make in the near future, to align with real components (e.g. the GIC-700), will break compatibility for existing firmware. Introduce two new properties to the DT generated on machine generation: - machine-version-major To be incremented when a platform change makes the machine incompatible with existing firmware. - machine-version-minor To be incremented when functionality is added to the machine without causing incompatibility with existing firmware. to be reset to 0 when machine-version-major is incremented. This versioning scheme is *neither*: - A QEMU versioned machine type; a given version of QEMU will emulate a given version of the platform. - A reflection of level of SBSA (now SystemReady SR) support provided. The version will increment on guest-visible functional changes only, akin to a revision ID register found on a physical platform. These properties are both introduced with the value 0. (Hence, a machine where the DT is lacking these nodes is equivalent to version 0.0.) Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20220505113947.75714-1-quic_llindhol@quicinc.com Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Radoslaw Biernacki <rad@semihalf.com> Cc: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(SBSAMachineState *sms) qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); + /* + * This versioning scheme is for informing platform fw only. It is neither: + * - A QEMU versioned machine type; a given version of QEMU will emulate + * a given version of the platform. + * - A reflection of level of SBSA (now SystemReady SR) support provided. + * + * machine-version-major: updated when changes breaking fw compatibility + * are introduced. + * machine-version-minor: updated when features are added that don't break + * fw compatibility. + */ + qemu_fdt_setprop_cell(fdt, "/", "machine-version-major", 0); + qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 0); + if (ms->numa_state->have_numa_distance) { int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t); uint32_t *matrix = g_malloc0(size); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> This adds cluster-id in CPU instance properties, which will be used by arm/virt machine. Besides, the cluster-id is also verified or dumped in various spots: * hw/core/machine.c::machine_set_cpu_numa_node() to associate CPU with its NUMA node. * hw/core/machine.c::machine_numa_finish_cpu_init() to record CPU slots with no NUMA mapping set. * hw/core/machine-hmp-cmds.c::hmp_hotpluggable_cpus() to dump cluster-id. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-2-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- qapi/machine.json | 6 ++++-- hw/core/machine-hmp-cmds.c | 4 ++++ hw/core/machine.c | 16 ++++++++++++++++ 3 files changed, 24 insertions(+), 2 deletions(-) diff --git a/qapi/machine.json b/qapi/machine.json index XXXXXXX..XXXXXXX 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -XXX,XX +XXX,XX @@ # @node-id: NUMA node ID the CPU belongs to # @socket-id: socket number within node/board the CPU belongs to # @die-id: die number within socket the CPU belongs to (since 4.1) -# @core-id: core number within die the CPU belongs to +# @cluster-id: cluster number within die the CPU belongs to (since 7.1) +# @core-id: core number within cluster the CPU belongs to # @thread-id: thread number within core the CPU belongs to # -# Note: currently there are 5 properties that could be present +# Note: currently there are 6 properties that could be present # but management should be prepared to pass through other # properties with device_add command to allow for future # interface extension. This also requires the filed names to be kept in @@ -XXX,XX +XXX,XX @@ 'data': { '*node-id': 'int', '*socket-id': 'int', '*die-id': 'int', + '*cluster-id': 'int', '*core-id': 'int', '*thread-id': 'int' } diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine-hmp-cmds.c +++ b/hw/core/machine-hmp-cmds.c @@ -XXX,XX +XXX,XX @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict) if (c->has_die_id) { monitor_printf(mon, " die-id: \"%" PRIu64 "\"\n", c->die_id); } + if (c->has_cluster_id) { + monitor_printf(mon, " cluster-id: \"%" PRIu64 "\"\n", + c->cluster_id); + } if (c->has_core_id) { monitor_printf(mon, " core-id: \"%" PRIu64 "\"\n", c->core_id); } diff --git a/hw/core/machine.c b/hw/core/machine.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine.c +++ b/hw/core/machine.c @@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine, return; } + if (props->has_cluster_id && !slot->props.has_cluster_id) { + error_setg(errp, "cluster-id is not supported"); + return; + } + if (props->has_socket_id && !slot->props.has_socket_id) { error_setg(errp, "socket-id is not supported"); return; @@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine, continue; } + if (props->has_cluster_id && + props->cluster_id != slot->props.cluster_id) { + continue; + } + if (props->has_die_id && props->die_id != slot->props.die_id) { continue; } @@ -XXX,XX +XXX,XX @@ static char *cpu_slot_to_string(const CPUArchId *cpu) } g_string_append_printf(s, "die-id: %"PRId64, cpu->props.die_id); } + if (cpu->props.has_cluster_id) { + if (s->len) { + g_string_append_printf(s, ", "); + } + g_string_append_printf(s, "cluster-id: %"PRId64, cpu->props.cluster_id); + } if (cpu->props.has_core_id) { if (s->len) { g_string_append_printf(s, ", "); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> The CPU topology isn't enabled on arm/virt machine yet, but we're going to do it in next patch. After the CPU topology is enabled by next patch, "thread-id=1" becomes invalid because the CPU core is preferred on arm/virt machine. It means these two CPUs have 0/1 as their core IDs, but their thread IDs are all 0. It will trigger test failure as the following message indicates: [14/21 qemu:qtest+qtest-aarch64 / qtest-aarch64/numa-test ERROR 1.48s killed by signal 6 SIGABRT >>> G_TEST_DBUS_DAEMON=/home/gavin/sandbox/qemu.main/tests/dbus-vmstate-daemon.sh \ QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon \ QTEST_QEMU_BINARY=./qemu-system-aarch64 \ QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=83 \ /home/gavin/sandbox/qemu.main/build/tests/qtest/numa-test --tap -k ―――――――――――――――――――――――――――――――――――――――――――――― stderr: qemu-system-aarch64: -numa cpu,node-id=0,thread-id=1: no match found This fixes the issue by providing comprehensive SMP configurations in aarch64_numa_cpu(). The SMP configurations aren't used before the CPU topology is enabled in next patch. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Message-id: 20220503140304.855514-3-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/numa-test.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/numa-test.c +++ b/tests/qtest/numa-test.c @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) QTestState *qts; g_autofree char *cli = NULL; - cli = make_cli(data, "-machine smp.cpus=2 " + cli = make_cli(data, "-machine " + "smp.cpus=2,smp.sockets=1,smp.clusters=1,smp.cores=1,smp.threads=2 " "-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " "-numa cpu,node-id=1,thread-id=0 " "-numa cpu,node-id=0,thread-id=1"); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> Currently, the SMP configuration isn't considered when the CPU topology is populated. In this case, it's impossible to provide the default CPU-to-NUMA mapping or association based on the socket ID of the given CPU. This takes account of SMP configuration when the CPU topology is populated. The die ID for the given CPU isn't assigned since it's not supported on arm/virt machine. Besides, the used SMP configuration in qtest/numa-test/aarch64_numa_cpu() is corrcted to avoid testing failure Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-4-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) int n; unsigned int max_cpus = ms->smp.max_cpus; VirtMachineState *vms = VIRT_MACHINE(ms); + MachineClass *mc = MACHINE_GET_CLASS(vms); if (ms->possible_cpus) { assert(ms->possible_cpus->len == max_cpus); @@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) ms->possible_cpus->cpus[n].type = ms->cpu_type; ms->possible_cpus->cpus[n].arch_id = virt_cpu_mp_affinity(vms, n); + + assert(!mc->smp_props.dies_supported); + ms->possible_cpus->cpus[n].props.has_socket_id = true; + ms->possible_cpus->cpus[n].props.socket_id = + n / (ms->smp.clusters * ms->smp.cores * ms->smp.threads); + ms->possible_cpus->cpus[n].props.has_cluster_id = true; + ms->possible_cpus->cpus[n].props.cluster_id = + (n / (ms->smp.cores * ms->smp.threads)) % ms->smp.clusters; + ms->possible_cpus->cpus[n].props.has_core_id = true; + ms->possible_cpus->cpus[n].props.core_id = + (n / ms->smp.threads) % ms->smp.cores; ms->possible_cpus->cpus[n].props.has_thread_id = true; - ms->possible_cpus->cpus[n].props.thread_id = n; + ms->possible_cpus->cpus[n].props.thread_id = + n % ms->smp.threads; } return ms->possible_cpus; } -- 2.25.1 From: Gavin Shan <gshan@redhat.com> In aarch64_numa_cpu(), the CPU and NUMA association is something like below. Two threads in the same core/cluster/socket are associated with two individual NUMA nodes, which is unreal as Igor Mammedov mentioned. We don't expect the association to break NUMA-to-socket boundary, which matches with the real world. NUMA-node socket cluster core thread ------------------------------------------ 0 0 0 0 0 1 0 0 0 1 This corrects the topology for CPUs and their association with NUMA nodes. After this patch is applied, the CPU and NUMA association becomes something like below, which looks real. Besides, socket/cluster/core/thread IDs are all checked when the NUMA node IDs are verified. It helps to check if the CPU topology is properly populated or not. NUMA-node socket cluster core thread ------------------------------------------ 0 1 0 0 0 1 0 0 0 0 Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-5-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/numa-test.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/numa-test.c +++ b/tests/qtest/numa-test.c @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) g_autofree char *cli = NULL; cli = make_cli(data, "-machine " - "smp.cpus=2,smp.sockets=1,smp.clusters=1,smp.cores=1,smp.threads=2 " + "smp.cpus=2,smp.sockets=2,smp.clusters=1,smp.cores=1,smp.threads=1 " "-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " - "-numa cpu,node-id=1,thread-id=0 " - "-numa cpu,node-id=0,thread-id=1"); + "-numa cpu,node-id=0,socket-id=1,cluster-id=0,core-id=0,thread-id=0 " + "-numa cpu,node-id=1,socket-id=0,cluster-id=0,core-id=0,thread-id=0"); qts = qtest_init(cli); cpus = get_cpus(qts, &resp); g_assert(cpus); while ((e = qlist_pop(cpus))) { QDict *cpu, *props; - int64_t thread, node; + int64_t socket, cluster, core, thread, node; cpu = qobject_to(QDict, e); g_assert(qdict_haskey(cpu, "props")); @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) g_assert(qdict_haskey(props, "node-id")); node = qdict_get_int(props, "node-id"); + g_assert(qdict_haskey(props, "socket-id")); + socket = qdict_get_int(props, "socket-id"); + g_assert(qdict_haskey(props, "cluster-id")); + cluster = qdict_get_int(props, "cluster-id"); + g_assert(qdict_haskey(props, "core-id")); + core = qdict_get_int(props, "core-id"); g_assert(qdict_haskey(props, "thread-id")); thread = qdict_get_int(props, "thread-id"); - if (thread == 0) { + if (socket == 0 && cluster == 0 && core == 0 && thread == 0) { g_assert_cmpint(node, ==, 1); - } else if (thread == 1) { + } else if (socket == 1 && cluster == 0 && core == 0 && thread == 0) { g_assert_cmpint(node, ==, 0); } else { g_assert(false); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> When CPU-to-NUMA association isn't explicitly provided by users, the default one is given by mc->get_default_cpu_node_id(). However, the CPU topology isn't fully considered in the default association and this causes CPU topology broken warnings on booting Linux guest. For example, the following warning messages are observed when the Linux guest is booted with the following command lines. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host \ -cpu host \ -smp 6,sockets=2,cores=3,threads=1 \ -m 1024M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=128M \ -object memory-backend-ram,id=mem1,size=128M \ -object memory-backend-ram,id=mem2,size=128M \ -object memory-backend-ram,id=mem3,size=128M \ -object memory-backend-ram,id=mem4,size=128M \ -object memory-backend-ram,id=mem4,size=384M \ -numa node,nodeid=0,memdev=mem0 \ -numa node,nodeid=1,memdev=mem1 \ -numa node,nodeid=2,memdev=mem2 \ -numa node,nodeid=3,memdev=mem3 \ -numa node,nodeid=4,memdev=mem4 \ -numa node,nodeid=5,memdev=mem5 : alternatives: patching kernel code BUG: arch topology borken the CLS domain not a subset of the MC domain <the above error log repeats> BUG: arch topology borken the DIE domain not a subset of the NODE domain With current implementation of mc->get_default_cpu_node_id(), CPU#0 to CPU#5 are associated with NODE#0 to NODE#5 separately. That's incorrect because CPU#0/1/2 should be associated with same NUMA node because they're seated in same socket. This fixes the issue by considering the socket ID when the default CPU-to-NUMA association is provided in virt_possible_cpu_arch_ids(). With this applied, no more CPU topology broken warnings are seen from the Linux guest. The 6 CPUs are associated with NODE#0/1, but there are no CPUs associated with NODE#2/3/4/5. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Message-id: 20220503140304.855514-6-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ virt_cpu_index_to_props(MachineState *ms, unsigned cpu_index) static int64_t virt_get_default_cpu_node_id(const MachineState *ms, int idx) { - return idx % ms->numa_state->num_nodes; + int64_t socket_id = ms->possible_cpus->cpus[idx].props.socket_id; + + return socket_id % ms->numa_state->num_nodes; } static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) -- 2.25.1 From: Gavin Shan <gshan@redhat.com> When the PPTT table is built, the CPU topology is re-calculated, but it's unecessary because the CPU topology has been populated in virt_possible_cpu_arch_ids() on arm/virt machine. This reworks build_pptt() to avoid by reusing the existing IDs in ms->possible_cpus. Currently, the only user of build_pptt() is arm/virt machine. Signed-off-by: Gavin Shan <gshan@redhat.com> Tested-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20220503140304.855514-7-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/acpi/aml-build.c | 111 +++++++++++++++++++------------------------- 1 file changed, 48 insertions(+), 63 deletions(-) diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/acpi/aml-build.c +++ b/hw/acpi/aml-build.c @@ -XXX,XX +XXX,XX @@ void build_pptt(GArray *table_data, BIOSLinker *linker, MachineState *ms, const char *oem_id, const char *oem_table_id) { MachineClass *mc = MACHINE_GET_CLASS(ms); - GQueue *list = g_queue_new(); - guint pptt_start = table_data->len; - guint parent_offset; - guint length, i; - int uid = 0; - int socket; + CPUArchIdList *cpus = ms->possible_cpus; + int64_t socket_id = -1, cluster_id = -1, core_id = -1; + uint32_t socket_offset = 0, cluster_offset = 0, core_offset = 0; + uint32_t pptt_start = table_data->len; + int n; AcpiTable table = { .sig = "PPTT", .rev = 2, .oem_id = oem_id, .oem_table_id = oem_table_id }; acpi_table_begin(&table, table_data); - for (socket = 0; socket < ms->smp.sockets; socket++) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - /* - * Physical package - represents the boundary - * of a physical package - */ - (1 << 0), - 0, socket, NULL, 0); - } - - if (mc->smp_props.clusters_supported) { - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int cluster; - - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (cluster = 0; cluster < ms->smp.clusters; cluster++) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - (0 << 0), /* not a physical package */ - parent_offset, cluster, NULL, 0); - } + /* + * This works with the assumption that cpus[n].props.*_id has been + * sorted from top to down levels in mc->possible_cpu_arch_ids(). + * Otherwise, the unexpected and duplicated containers will be + * created. + */ + for (n = 0; n < cpus->len; n++) { + if (cpus->cpus[n].props.socket_id != socket_id) { + assert(cpus->cpus[n].props.socket_id > socket_id); + socket_id = cpus->cpus[n].props.socket_id; + cluster_id = -1; + core_id = -1; + socket_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (1 << 0), /* Physical package */ + 0, socket_id, NULL, 0); } - } - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int core; - - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (core = 0; core < ms->smp.cores; core++) { - if (ms->smp.threads > 1) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - (0 << 0), /* not a physical package */ - parent_offset, core, NULL, 0); - } else { - build_processor_hierarchy_node( - table_data, - (1 << 1) | /* ACPI Processor ID valid */ - (1 << 3), /* Node is a Leaf */ - parent_offset, uid++, NULL, 0); + if (mc->smp_props.clusters_supported) { + if (cpus->cpus[n].props.cluster_id != cluster_id) { + assert(cpus->cpus[n].props.cluster_id > cluster_id); + cluster_id = cpus->cpus[n].props.cluster_id; + core_id = -1; + cluster_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (0 << 0), /* Not a physical package */ + socket_offset, cluster_id, NULL, 0); } + } else { + cluster_offset = socket_offset; } - } - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int thread; + if (ms->smp.threads == 1) { + build_processor_hierarchy_node(table_data, + (1 << 1) | /* ACPI Processor ID valid */ + (1 << 3), /* Node is a Leaf */ + cluster_offset, n, NULL, 0); + } else { + if (cpus->cpus[n].props.core_id != core_id) { + assert(cpus->cpus[n].props.core_id > core_id); + core_id = cpus->cpus[n].props.core_id; + core_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (0 << 0), /* Not a physical package */ + cluster_offset, core_id, NULL, 0); + } - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (thread = 0; thread < ms->smp.threads; thread++) { - build_processor_hierarchy_node( - table_data, + build_processor_hierarchy_node(table_data, (1 << 1) | /* ACPI Processor ID valid */ (1 << 2) | /* Processor is a Thread */ (1 << 3), /* Node is a Leaf */ - parent_offset, uid++, NULL, 0); + core_offset, n, NULL, 0); } } - g_queue_free(list); acpi_table_end(linker, &table); } -- 2.25.1