Instead of using the confuse i2c_send_recv(), replace
  i2c_send_recv(send = true) by i2c_send() and
  i2c_send_recv(send = false) by i2c_recv().
During the replacement we also change a while() statement by for().
The resulting code is easier to review.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/misc/auxbus.c | 35 +++++++++++------------------------
 1 file changed, 11 insertions(+), 24 deletions(-)

diff --git a/hw/misc/auxbus.c b/hw/misc/auxbus.c
index d96219aef88..44aa9730bc9 100644
--- a/hw/misc/auxbus.c
+++ b/hw/misc/auxbus.c
@@ -141,12 +141,8 @@ AUXReply aux_request(AUXBus *bus, AUXCommand cmd, uint32_t address,
         }
 
         ret = AUX_I2C_ACK;
-        while (len > 0) {
-            if (i2c_send_recv(i2c_bus, data++, false) < 0) {
-                ret = AUX_I2C_NACK;
-                break;
-            }
-            len--;
+        for (i = 0; i < len; i++) {
+            data[i] = i2c_recv(i2c_bus);
         }
         i2c_end_transfer(i2c_bus);
         break;
@@ -161,12 +157,11 @@ AUXReply aux_request(AUXBus *bus, AUXCommand cmd, uint32_t address,
         }
 
         ret = AUX_I2C_ACK;
-        while (len > 0) {
-            if (i2c_send_recv(i2c_bus, data++, true) < 0) {
+        for (i = 0; i < len; i++) {
+            if (i2c_send(i2c_bus, data[i]) < 0) {
                 ret = AUX_I2C_NACK;
                 break;
             }
-            len--;
         }
         i2c_end_transfer(i2c_bus);
         break;
@@ -200,15 +195,13 @@ AUXReply aux_request(AUXBus *bus, AUXCommand cmd, uint32_t address,
 
         bus->last_transaction = cmd;
         bus->last_i2c_address = address;
-        while (len > 0) {
-            if (i2c_send_recv(i2c_bus, data++, true) < 0) {
+        ret = AUX_I2C_ACK;
+        for (i = 0; i < len; i++) {
+            if (i2c_send(i2c_bus, data[i]) < 0) {
                 i2c_end_transfer(i2c_bus);
+                ret = AUX_I2C_NACK;
                 break;
             }
-            len--;
-        }
-        if (len == 0) {
-            ret = AUX_I2C_ACK;
         }
         break;
     case READ_I2C_MOT:
@@ -233,16 +226,10 @@ AUXReply aux_request(AUXBus *bus, AUXCommand cmd, uint32_t address,
 
         bus->last_transaction = cmd;
         bus->last_i2c_address = address;
-        while (len > 0) {
-            if (i2c_send_recv(i2c_bus, data++, false) < 0) {
-                i2c_end_transfer(i2c_bus);
-                break;
-            }
-            len--;
-        }
-        if (len == 0) {
-            ret = AUX_I2C_ACK;
+        for (i = 0; i < len; i++) {
+            data[i] = i2c_recv(i2c_bus);
         }
+        ret = AUX_I2C_ACK;
         break;
     default:
         qemu_log_mask(LOG_UNIMP, "AUX cmd=%u not implemented\n", cmd);
-- 
2.31.1