On Thu, May 6, 2021 at 2:11 AM <frank.chang@sifive.com> wrote:
>
> From: Frank Chang <frank.chang@sifive.com>
>
> This patchset implements RISC-V B-extension v0.93 version Zba, Zbb and
> Zbs subset instructions. Some Zbp instructions are also implemented as
> they have similar behavior with their Zba-, Zbb- and Zbs-family
> instructions or for Zbb pseudo instructions (e.g. rev8, orc.b).
>
> Specification:
> https://github.com/riscv/riscv-bitmanip/blob/master/bitmanip-0.93.pdf
>
> The port is available here:
> https://github.com/sifive/qemu/tree/rvb-upstream-v6
>
> To test rvb implementation, specify cpu argument with 'x-b=true' or
> 'x-b=true,bext_spec=v0.93'to enable B-extension support.
>
> Changelog:
>
> v6:
> * rebase riscv-to-apply.next branch.
> * remove all #ifdef TARGET_RISCV64 macros.
>
> v5:
> * add bext_spec cpu option, default set to v0.93.
> * rebase master branch.
>
> v4:
> * Remove 'rd != 0' checks from immediate shift instructions.
>
> v3:
> * Convert existing immediate shift instructions to use gen_shifti()
> and gen_shiftiw() interfaces.
> * Rename *u.w instructions to *.uw.
> * Rename sb* instructions to b*.
> * Rename pcnt* instructions to cpop*.
>
> v2:
> * Add gen_shifti(), gen_shiftw(), gen_shiftiw() helper functions.
> * Remove addwu, subwu and addiwu instructions as they are not longer
> exist in latest draft.
> * Optimize implementation with cleaner tcg ops.
>
> Frank Chang (6):
> target/riscv: rvb: count bits set
> target/riscv: add gen_shifti() and gen_shiftiw() helper functions
> target/riscv: rvb: single-bit instructions
> target/riscv: rvb: generalized reverse
> target/riscv: rvb: generalized or-combine
> target/riscv: rvb: add b-ext version cpu option
>
> Kito Cheng (11):
> target/riscv: reformat @sh format encoding for B-extension
> target/riscv: rvb: count leading/trailing zeros
> target/riscv: rvb: logic-with-negate
> target/riscv: rvb: pack two words into one register
> target/riscv: rvb: min/max instructions
> target/riscv: rvb: sign-extend instructions
> target/riscv: rvb: shift ones
> target/riscv: rvb: rotate (left/right)
> target/riscv: rvb: address calculation
> target/riscv: rvb: add/shift with prefix zero-extend
> target/riscv: rvb: support and turn on B-extension from command line
Thanks!
Applied to riscv-to-apply.next
Alistair
>
> target/riscv/bitmanip_helper.c | 90 +++++
> target/riscv/cpu.c | 27 ++
> target/riscv/cpu.h | 5 +
> target/riscv/helper.h | 6 +
> target/riscv/insn32.decode | 87 ++++-
> target/riscv/insn_trans/trans_rvb.c.inc | 438 ++++++++++++++++++++++++
> target/riscv/insn_trans/trans_rvi.c.inc | 54 +--
> target/riscv/meson.build | 1 +
> target/riscv/translate.c | 306 +++++++++++++++++
> 9 files changed, 958 insertions(+), 56 deletions(-)
> create mode 100644 target/riscv/bitmanip_helper.c
> create mode 100644 target/riscv/insn_trans/trans_rvb.c.inc
>
> --
> 2.17.1
>
>